DOCSLIB.ORG

Apply Perforce Diff Patch

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Apply Perforce Diff Patch Apply perforce diff patch click here to download Perhaps Perforce's diff output format has changed, but @RumburaK's answer didn't work for me. I had to modify it to convert the ==== header to. p4 diff runs a diff program on your workstation that compares files in your the diff routine used is the one built into the p4 command-line application. Run the comparison on file file, displaying output in a format suitable for the patch(1) utility. Apply patch to P4 dept - posted in General: How can I apply a patch which was generated by "p4 diff" or "p4 diff2"? Is there any way to. p4 diff2 uses the Perforce server's built-in diff routine to compare two file added and deleted lines with sufficient context for compatibility with the patch(1) utility. Aug 5, Introduction. I'm sitting here in my apartment amongst boxes and boxes, still unpacked from moving from San Diego. Moving is always a pain. Dec 27, And Larry Wall who invented the patch command which can take a diff file and effectively apply it to files. Ad Honestly I was afraid of using patch. A python tool to apply patches genereated by diff to perforce managed files - neilengineer/p4-patch. Jun 24, How to? Create the patch,. p4 diff -du -db main-branch/ > ~/www.doorway.ru Go to the work directory of release branch. cd dir-release-branch/. patch tries to skip any leading garbage, apply the diff, and then skip any trailing is found, patch selects the first named file with an RCS, ClearCase, Perforce. Upon startup, patch attempts to determine the type of the diff listing, unless ed( 1) editor via a pipe. patch tries to skip any leading garbage, apply the diff, patch selects the first named file with an RCS, ClearCase, Perforce, or SCCS master. This plugin pulls a diff from reviewboard request, applies the patch, builds it and Perforce), any hosting, and will require only Jenkins server configuration. Jul 31, Crucible or later: p4 -z tag diff -du > www.doorway.ru Since Perforce diffs do not include added and deleted files, you should use p4 opened to. It looks that the unified diff generated by the p4 diff file can't be recognized by patch? Is there any tool can help that? Thanks, Neo. -- I would remember that if. In the Apply Patch dialog that opens, specify the path to www.doorway.ru file you want To check if you patch can be applied without conflicts, click the Show Diff icon. in depot p4 diff2 -u //PATH/ REV1 //PATH/ REV2 > www.doorway.ru Create a patch between 2 Perforce changelists. Execute from command line: REV1 - from . rbt patch will download the latest diff from the review request matching review- request-id and apply it to the local working directory. The --diff- revision option may. Mar 8, Introduction to an opensource utility for generating patch files for pending can generate a diff file by using the command line interface. p4 diff helps Upon opening the application you will be presented with the login screen. Dec 10, I've been using Perforce on for various things during the last 2 years. You have applied a diff (patchfile) on top of a checkout, and you want to. Sep 28, Perforce authors on how the source version control should or should Generate a patch archive on the local machine via p4p diff (www.doorway.ru will be created). fully control the remote P4 client and also apply/revert your patch. Sep 24, When I try to apply a patch from review board by using rbt patch, the tool :// www.doorway.ru VIM provides the:diffpatch command to do single file reviews but can not handle vcs, scm, mercurial, bazaar, hg, bzr, cvs, monotone, mtn, git, perforce, fossil). Oct 2, When we want to view the diff files posted on the server, we have this: 1 The patch to '//my/path/is/relatively/short/www.doorway.ru' didn't apply. patch - apply a diff file to an original . RCS, ClearCase, Perforce, or SCCS master is found, patch selects the first named file with an RCS, ClearCase, Perforce. This article compares computer software tools that compare files, and in many cases directories twdiff (TextWrangler Diff Helper), Bare Bones Software, Inc. No; Proprietary, Yes; with . SFTP support, Version Control browsing, Patch creation, Patch application, Patch preview Perforce P4Merge, N/A, No, No, No, Yes. Or you can pipe the results of another diff command right into the ccollab process using a Perforce has a variety of output formats; we support all of them. patch tries to skip any leading garbage, apply the diff, and then skip any patch selects the first named file with an RCS, ClearCase, Perforce, or SCCS master. Dec 1, Right click on the DSpace project, select 'Team -> Apply Patch'. Select the Assuming all the files listed in the 'Verify Patch' screen have green. Prerequisites ^. You'll need to get hold of the following software. Perforce . Note also that this option applies to protocol version 2 only. grep perlhack for APC, and append eg "/diffs/gz" to one of the URLs to get a usable patch.). Jan 21, This script is used to generate diffs suitable for applying with patch. changelist or for a specific set of files using standard Perforce syntax. Perforce, the company best known for its enterprise version control platform, also If you don't need the power of a dedicated Diff tool application, the integrated. Perforce is pretty fast -- I mean, it has this "nocompress" option that you can tweak .. fetch origin" (or "git fetch" if you apply the bugfix I forgot to send back from work). .. work with huge repos in P4 send around diff packs for review. diff/patch ?. Nov 17, (Might also be usable as "Perforce for Mercurial users") Some parts of the general discussion about Mercurial and other centralized SCM systems apply here too. Please . put the exported PatchFiles on a server for someone to download p4 diff. show diff for files opened for edit. hg diff. show diff for all. Perforce. www.doorway.ru Server version and later. CVS All version control systems provide menu options to diff the current file or project: You can either apply a patch file that is open in Qt Creator or select the patch file to. Results 1 - 30 Fortunately, distribution rights do not apply for internal use. This set of differences is often called a `diff' or `patch'. Visual merge and diff tool from Perforce - P4Merge - lets you visualize the differences between file versions. Applying patches to perl Error: Target www.doorway.ru returned: shell command error 2 Command output: Get file hints/www.doorway.ru from Perforce with lock? diff -u -u -r www.doorway.ru base/src/darwinports/darwinports. tcl 9 Apr. Of course, you can use your own favourite diff program if you like. files in a particular revision in one view, you can use Unified-Diff output (GNU patch format ). Apr 2, For video games, and especially non-coders, Perforce is clearly But it looks like if you run "p4 diff -du file" it creates a patch that could be. I applied the following patch to x11/sterm and - copied the /st/patches/*.diff files to /x11/sterm/files/ - in x11/sterm: # make deinstall clean # make. Apr 22, Diffs; Adding and Removing Files; Working with Diffs; The p4 application also contains an extensive amount of online help. Dec 8, Those links for opening the review request or diff are useful, but you can save yourself Apply a review request's diff to your tree with rbt patch. May 27, How to create and apply a patch with Subversion. '/^+++|/s@/@ @g'| patch That is: • Use p4 diff2 to get a unified diff (-u) of part of the depot. In your first diff output (so called "normall diff") the meaning is as follows and 5a5 can be ignored, they are commands for patch which is often used with diff. Once installed, you configure JDeveloper and connect to the Perforce client Perforce provides features for creating and applying patches—methods for On the Display page, enter a caption for the diff tool (for example CVS Diff with. Nov 30, Diff tools can be extremely useful when working on large projects, especially when without the aid of a revision control system such as CVS or Perforce. DiffMerge is an application to visually compare and merge files for. Perforce, www.doorway.ru, Server version and later Patch command specifies the path to the patch utility that is used to apply changes in If the file is accessible, you can double-click on a selected diff chunk and Qt Creator. Jun 15, Can I apply changes from a perforce patch(downloaded from review I can not ask him to shelve the files or to give me a unified diff of the files. patch tries to skip any leading garbage, apply the diff, and then skip any trailing If no named files exist, no RCS, ClearCase, Perforce, or SCCS master was. Nov 14, You have to append www.doorway.ru www.doorway.ru suffix to the name explicitly. their own ( with the exception of Perforce which needs to you manually "open" These two allow you to apply or unapply the top-most patchset and thus let. Oct 4, Added -i option to apply changes to files instead. svn diff|www.doorway.ru| patch -p0 Among well-known tools are Perforce and CVS. Patch file name, Specify the name of the *.patch file that you want to apply.
Load more

Recommended publications
  • Autocad Command Aliases
    AutoCAD and Its Applications Advanced Appendix D AutoCAD Command Aliases Command Alias 3DALIGN 3AL 3DFACE 3F 3DMOVE 3M 3DORBIT 3DO, ORBIT, 3DVIEW, ISOMETRICVIEW 3DPOLY 3P 3DPRINT 3DP, 3DPLOT, RAPIDPROTOTYPE 3DROTATE 3R 3DSCALE 3S 3DWALK 3DNAVIGATE, 3DW ACTRECORD ARR ACTSTOP ARS -ACTSTOP -ARS ACTUSERINPUT ARU ACTUSERMESSAGE ARM -ACTUSERMESSAGE -ARM ADCENTER ADC, DC, DCENTER ALIGN AL ALLPLAY APLAY ANALYSISCURVATURE CURVATUREANALYSIS ANALYSISZEBRA ZEBRA APPLOAD AP ARC A AREA AA ARRAY AR -ARRAY -AR ATTDEF ATT -ATTDEF -ATT Copyright Goodheart-Willcox Co., Inc. Appendix D — AutoCAD Command Aliases 1 May not be reproduced or posted to a publicly accessible website. Command Alias ATTEDIT ATE -ATTEDIT -ATE, ATTE ATTIPEDIT ATI BACTION AC BCLOSE BC BCPARAMETER CPARAM BEDIT BE BLOCK B -BLOCK -B BOUNDARY BO -BOUNDARY -BO BPARAMETER PARAM BREAK BR BSAVE BS BVSTATE BVS CAMERA CAM CHAMFER CHA CHANGE -CH CHECKSTANDARDS CHK CIRCLE C COLOR COL, COLOUR COMMANDLINE CLI CONSTRAINTBAR CBAR CONSTRAINTSETTINGS CSETTINGS COPY CO, CP CTABLESTYLE CT CVADD INSERTCONTROLPOINT CVHIDE POINTOFF CVREBUILD REBUILD CVREMOVE REMOVECONTROLPOINT CVSHOW POINTON Copyright Goodheart-Willcox Co., Inc. Appendix D — AutoCAD Command Aliases 2 May not be reproduced or posted to a publicly accessible website. Command Alias CYLINDER CYL DATAEXTRACTION DX DATALINK DL DATALINKUPDATE DLU DBCONNECT DBC, DATABASE, DATASOURCE DDGRIPS GR DELCONSTRAINT DELCON DIMALIGNED DAL, DIMALI DIMANGULAR DAN, DIMANG DIMARC DAR DIMBASELINE DBA, DIMBASE DIMCENTER DCE DIMCONSTRAINT DCON DIMCONTINUE DCO, DIMCONT DIMDIAMETER DDI, DIMDIA DIMDISASSOCIATE DDA DIMEDIT DED, DIMED DIMJOGGED DJO, JOG DIMJOGLINE DJL DIMLINEAR DIMLIN, DLI DIMORDINATE DOR, DIMORD DIMOVERRIDE DOV, DIMOVER DIMRADIUS DIMRAD, DRA DIMREASSOCIATE DRE DIMSTYLE D, DIMSTY, DST DIMTEDIT DIMTED DIST DI, LENGTH DIVIDE DIV DONUT DO DRAWINGRECOVERY DRM DRAWORDER DR Copyright Goodheart-Willcox Co., Inc.
    [Show full text]
  • Tortoisemerge a Diff/Merge Tool for Windows Version 1.11
    TortoiseMerge A diff/merge tool for Windows Version 1.11 Stefan Küng Lübbe Onken Simon Large TortoiseMerge: A diff/merge tool for Windows: Version 1.11 by Stefan Küng, Lübbe Onken, and Simon Large Publication date 2018/09/22 18:28:22 (r28377) Table of Contents Preface ........................................................................................................................................ vi 1. TortoiseMerge is free! ....................................................................................................... vi 2. Acknowledgments ............................................................................................................. vi 1. Introduction .............................................................................................................................. 1 1.1. Overview ....................................................................................................................... 1 1.2. TortoiseMerge's History .................................................................................................... 1 2. Basic Concepts .......................................................................................................................... 3 2.1. Viewing and Merging Differences ...................................................................................... 3 2.2. Editing Conflicts ............................................................................................................. 3 2.3. Applying Patches ...........................................................................................................
    [Show full text]
  • Homotopical Patch Theory (Expanded Version)
    Homotopical Patch Theory (Expanded Version) Carlo Angiuli ∗ Edward Morehouse ∗ Daniel R. Licata Carnegie Mellon University Carnegie Mellon University Wesleyan University [email protected] [email protected] [email protected] Robert Harper ∗ Carnegie Mellon University [email protected] Abstract In homotopy theory, one studies topological spaces by way of their Homotopy type theory is an extension of Martin-Löf type theory, points, paths (between points), homotopies (paths or continuous de- based on a correspondence with homotopy theory and higher cat- formations between paths), homotopies between homotopies (paths egory theory. In homotopy type theory, the propositional equality between paths between paths), and so on. In type theory, a space type becomes proof-relevant, and corresponds to paths in a space. corresponds to a type A. Points of a space correspond to elements This allows for a new class of datatypes, called higher inductive a; b : A. Paths in a space are represented by elements of the identity types, which are specified by constructors not only for points but type (propositional equality), which we notate p : a =A b. Homo- also for paths. In this paper, we consider a programming application topies between paths p and q correspond to elements of the iterated identity type p = q. The rules for the identity type allow one of higher inductive types. Version control systems such as Darcs are a=Ab based on the notion of patches—syntactic representations of edits to define the operations on paths that are considered in homotopy to a repository. We show how patch theory can be developed in ho- theory.
    [Show full text]
  • U S P I M S B C S Improving Parallelism in Git-Grep Matheus
    University of São Paulo Institute of Mathematics and Statistics Bachelor of Computer Science Improving Parallelism in git-grep Matheus Tavares Bernardino Final Essay [v2.0] mac 499 - Capstone Project Program: Computer Science Advisor: Prof. Dr. Alfredo Goldman São Paulo January 19, 2020 Abstract Matheus Tavares Bernardino. Improving Parallelism in git-grep. Capstone Project Report (Bachelor). Institute of Mathematics and Statistics, University of São Paulo, São Paulo, 2019. Version control systems have become standard use in medium to large software development. And, among them, Git has become the most popular (Stack Exchange, Inc., 2018). Being used to manage a large variety of projects, with dierent magnitudes (in both content and history sizes), it must be build to scale. With this in mind, Git’s grep command was made parallel using a producer-consumer mechanism. However, when operating in Git’s internal object store (e.g. for a search in older revisions), the multithreaded version became slower than the sequential code. For this reason, threads were disabled in the object store case. The present work aims to contribute to the Git project improving the parallelization of the grep command and re-enabling threads for all cases. Analyzes were made on git-grep to locate its hotspots, i.e. where it was consumming the most time, and investigate how that could be mitigated. Between other ndings, these studies showed that the object decompression rou- tines accounted for up to one third of git-grep’s total execution time. These routines, despite being thread-safe, had to be serialized in the rst threaded implementation, because of the surrouding thread-unsafe object reading machinery.
    [Show full text]
  • Oracle Goldengate for Windows and UNIX
    Oracle® GoldenGate Windows and UNIX Administrator’s Guide 11g Release 2 Patch Set 1 (11.2.1.0.1) E29397-01 April 2012 Oracle GoldenGate Windows and UNIX Administrator’s Guide 11g Release 2 Patch Set 1 (11.2.1.0.1) E29397-01 Copyright © 2012, Oracle and/or its affiliates. All rights reserved. This software and related documentation are provided under a license agreement containing restrictions on use and disclosure and are protected by intellectual property laws. Except as expressly permitted in your license agreement or allowed by law, you may not use, copy, reproduce, translate, broadcast, modify, license, transmit, distribute, exhibit, perform, publish, or display any part, in any form, or by any means. Reverse engineering, disassembly, or decompilation of this software, unless required by law for interoperability, is prohibited. The information contained herein is subject to change without notice and is not warranted to be error-free. If you find any errors, please report them to us in writing. If this is software or related documentation that is delivered to the U.S. Government or anyone licensing it on behalf of the U.S. Government, the following notice is applicable: U.S. GOVERNMENT RIGHTS Programs, software, databases, and related documentation and technical data delivered to U.S. Government customers are "commercial computer software" or "commercial technical data" pursuant to the applicable Federal Acquisition Regulation and agency-specific supplemental regulations. As such, the use, duplication, disclosure, modification, and adaptation shall be subject to the restrictions and license terms set forth in the applicable Government contract, and, to the extent applicable by the terms of the Government contract, the additional rights set forth in FAR 52.227-19, Commercial Computer Software License (December 2007).
    [Show full text]
  • IBM Tivoli Endpoint Manager for Patch Management Continuous Patch Compliance Visibility and Enforcement
    IBM Software Data Sheet Tivoli IBM Tivoli Endpoint Manager for Patch Management Continuous patch compliance visibility and enforcement With software and the threats against that software constantly evolving, Highlights organizations need an effective way to assess, deploy and manage a con- stant flow of patches for the myriad operating systems and applications in ● Automatically manage patches for multi- their heterogeneous environments. For system administrators responsible ple operating systems and applications across hundreds of thousands of end- for potentially tens or hundreds of thousands of endpoints running vari- points regardless of location, connection ous operating systems and software applications, patch management type or status can easily overwhelm already strained budgets and staff. IBM Tivoli® ● Reduce security and compliance risk by Endpoint Manager for Patch Management balances the need for fast slashing remediation cycles from weeks deployment and high availability with an automated, simplified patching to days or hours process that is administered from a single console. ● Gain greater visibility into patch compli- ance with flexible, real-time monitoring Tivoli Endpoint Manager for Patch Management, built on BigFix® and reporting technology, gives organizations access to comprehensive capabilities ● Provide up-to-date visibility and control for delivering patches for Microsoft® Windows®, UNIX®, Linux® and from a single management console Mac operating systems, third-party applications from vendors including Adobe®, Mozilla, Apple and Java™, and customer-supplied patches to endpoints—regardless of their location, connection type or status. Endpoints can include servers, laptops, desktops, and specialized equip- ment such as point-of-sale (POS) devices, ATMs, and self-service kiosks. Apply only the correct patches to the correct endpoint One approach to patch management is to create large patch files with a large update “payload” and distribute them to all of the endpoints, regardless of whether they already have all of the patches or not.
    [Show full text]
  • Controlling CEMLI 10154
    Session ID: Controlling CEMLI 10154 Prepared by: Michael Brown Applications DBA A Code Migration Methodology BlueStar @MichaelBrownOrg Remember to complete your evaluation for this session within the app! Who Am I • Over 22 years experience with Oracle Database • Over 18 years experience with E-Business Suite • Chair, OAUG Database SIG • Co-Founder AppsPerf • Oracle ACE • OAUG Member of the Year 2013 • Applications DBA, BlueStar What • What are customizations? – R12.2 • Migration flow Customizations CEMLI • Definition – Configuration – Extensions – Modification – Localization – Integration CEMLI • Definition – Configuration – Extensions – Modification – Localization – Integration • Simpler – Changes made to the application outside of the applications • Not setups • Not personalizations • Potentially completely separate, e.g. Applications Express 12.2 • Standards are now requirements • Patch Cycle • If custom application server applications are used (including Applications Express), you must use a separate application server • Rest of presentation will assume 12.2 since the requirements are a superset of previous releases. Migration Flow Migration Flow • Minimum of two instances prior to production. Development Migration Flow • Minimum of two instances prior to production. Development Test Migration Flow • Minimum of two instances prior to production. Development Test Production Migration Flow R&D, Patch, etc. Development Test Production Development Production Two Support How do we control the migrations • Various tools exist, but they are expensive • What can we do with what we have – FNDLOAD – XDOLoader – scripting A Manual Methodology Migration Template • All migrations are in the same place – Environment variable $MIGRATE • Pre 12.2, actually under custom_top • 12.2, Outside of 12.2 Filesystems – /u01/app/oracle/apps/fs1 – /u01/app/oracle/apps/fs2 – /u01/app/oracle/apps/fs_ne – /u01/app/oracle/apps/migrate • Cloning • Each migration is put into a single directory – Naming convention: Development_Instance-#, e.g.
    [Show full text]
  • Installing the Watson Knowledge Catalog Service Patch 3.0.0.2 on IBM Cloud Pak for Data 2.5
    Installing the Watson Knowledge Catalog service patch 3.0.0.2 on IBM Cloud Pak for Data 2.5 Contents Overview ...................................................................................................................................................... 3 Installing the patch .................................................................................................................................... 3 Post-installation steps .............................................................................................................................. 4 Overview This service patch contains defect fixes and supports migration of data from IBM InfoSphere Information Server 11.7.1 to IBM Cloud Pak for Data 2.5.0. These instructions assume that you have the following products already installed in your Red Hat OpenShift cluster: - IBM® Cloud Pak for Data. For more information, see Installing Cloud Pak for Data on a Red Hat OpenShift cluster. - Watson Knowledge Catalog. For more information, see Installing the Watson Knowledge Catalog service. Required role: To install the patch, you must be a cluster administrator. Installing the patch To install the Watson Knowledge Catalog service patch 3.0.0.2, complete the following steps: 1. The patch files are publicly available in the IBM Cloud Pak GitHub repository. Make sure that the repo.yaml file that defines your registries and file servers contains reference to this URL: https://raw.githubusercontent.com/IBM/cloud-pak/master/repo/cpd 2. Change to the directory for the Cloud Pak for
    [Show full text]
  • Git Patch Operation
    GGIITT -- PPAATTCCHH OOPPEERRAATTIIOONN http://www.tutorialspoint.com/git/git_patch_operation.htm Copyright © tutorialspoint.com Patch is a text file, whose contents are similar to Git diff, but along with code, it also has metadata about commits; e.g., commit ID, date, commit message, etc. We can create a patch from commits and other people can apply them to their repository. Jerry implements the strcat function for his project. Jerry can create a path of his code and send it to Tom. Then, he can apply the received patch to his code. Jerry uses the Git format-patch command to create a patch for the latest commit. If you want to create a patch for a specific commit, then use COMMIT_ID with the format-patch command. [jerry@CentOS project]$ pwd /home/jerry/jerry_repo/project/src [jerry@CentOS src]$ git status -s M string_operations.c ?? string_operations [jerry@CentOS src]$ git add string_operations.c [jerry@CentOS src]$ git commit -m "Added my_strcat function" [master b4c7f09] Added my_strcat function 1 files changed, 13 insertions(+), 0 deletions(-) [jerry@CentOS src]$ git format-patch -1 0001-Added-my_strcat-function.patch The above command creates .patch files inside the current working directory. Tom can use this patch to modify his files. Git provides two commands to apply patches git amand git apply, respectively. Git apply modifies the local files without creating commit, while git am modifies the file and creates commit as well. To apply patch and create commit, use the following command: [tom@CentOS src]$ pwd /home/tom/top_repo/project/src [tom@CentOS src]$ git diff [tom@CentOS src]$ git status –s [tom@CentOS src]$ git apply 0001-Added-my_strcat-function.patch [tom@CentOS src]$ git status -s M string_operations.c ?? 0001-Added-my_strcat-function.patch The patch gets applied successfully, now we can view the modifications by using the git diff command.
    [Show full text]
  • Host Security: Pop Ups and Patch Management
    Host Security: Pop Ups and Patch Management Table of Contents Pop-ups ........................................................................................................................................... 2 Pop-up Blockers -1 .......................................................................................................................... 3 Pop-up Blockers -2 .......................................................................................................................... 5 Patch Management ......................................................................................................................... 7 Application Patch Management ................................................................................................... 12 Patch Management ....................................................................................................................... 14 Approved Application List ............................................................................................................. 15 Hardware Security ........................................................................................................................ 17 Notices .......................................................................................................................................... 18 Page 1 of 18 Pop-ups Pop-ups Pop-ups (and popunders) refer to a class of images which appear on a user’s screen without the user performing any action to deliberately invoke their appearance. • Pop-ups are not directly
    [Show full text]
  • Coordinated Concurrent Programming in Syndicate
    Coordinated Concurrent Programming in Syndicate Tony Garnock-Jones and Matthias Felleisen Northeastern University, Boston, Massachusetts, USA Abstract. Most programs interact with the world: via graphical user interfaces, networks, etc. This form of interactivity entails concurrency, and concurrent program components must coordinate their computa- tions. This paper presents Syndicate, a novel design for a coordinated, concurrent programming language. Each concurrent component in Syn- dicate is a functional actor that participates in scoped conversations. The medium of conversation arranges for message exchanges and coor- dinates access to common knowledge. As such, Syndicate occupies a novel point in this design space, halfway between actors and threads. 1 From Interaction to Concurrency and Coordination Most programs must interact with their context. Interactions often start as re- actions to external events, such as a user’s gesture or the arrival of a message. Because nobody coordinates the multitude of external events, a program must notice and react to events in a concurrent manner. Thus, a sequential program must de-multiplex the sequence of events and launch the appropriate concurrent component for each event. Put differently, these interacting programs consist of concurrent components, even in sequential languages. Concurrent program components must coordinate their computations to re- alize the overall goals of the program. This coordination takes two forms: the exchange of knowledge and the establishment of frame conditions. In addition, coordination must take into account that reactions to events may call for the cre- ation of new concurrent components or that existing components may disappear due to exceptions or partial failures. In short, coordination poses a major prob- lem to the proper design of effective communicating, concurrent components.
    [Show full text]
  • Homotopical Patch Theory
    Homotopical Patch Theory Carlo Angiuli ∗ Ed Morehouse∗ Daniel R. Licata Carnegie Mellon University Carnegie Mellon University Wesleyan University [email protected] [email protected] [email protected] Robert Harper∗ Carnegie Mellon University [email protected] Abstract identity type p =a=Ab q. The rules for the identity type allow one Homotopy type theory is an extension of Martin-Löf type the- to define the operations on paths that are considered in homotopy ory, based on a correspondence with homotopy theory and higher theory. These include identity paths refl : a = a (reflexivity of category theory. The propositional equality type becomes proof- equality), inverse paths ! p : b = a when p : a = b (symme- relevant, and acts like paths in a space. Higher inductive types are try of equality), and composition of paths q ◦ p : a = c when a new class of datatypes which are specified by constructors not p : a = b and q : b = c (transitivity of equality), as well as homo- only for points but also for paths. In this paper, we show how patch topies relating these operations (for example, refl ◦ p = p), and ho- theory in the style of the Darcs version control system can be de- motopies relating these homotopies, etc. This correspondence has veloped in homotopy type theory. We reformulate patch theory us- suggested several extensions to type theory. One is Voevodsky’s ing the tools of homotopy type theory, and clearly separate formal univalence axiom [16, 34], which describes the path structure of theories of patches from their interpretation in terms of basic revi- the universe (the type of small types).
    [Show full text]