DOCSLIB.ORG

New Flow Battery to Keep Big Cities Lit, Green and Safe

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
New Flow Battery to Keep Big Cities Lit, Green and Safe New flow battery to keep big cities lit, green and safe Wed, 02/25/2015 - 10:27am Frances White, PNNL Get today's R&D headlines and news - Sign up now! Ensuring the power grid keeps the lights on in large cities could be easier with a new battery design that packs far more energy than any other battery of its kind and size. The new zinc-polyiodide redox flow battery, described in Nature Communications , uses an electrolyte that has more than two times the energy density of the next-best flow battery used to store renewable energy and support the power grid. And its energy density is approaching that of a type of lithium-ion battery used to power portable electronic devices and some small electric vehicles. "With improved energy density and inherent fire safety, flow batteries could provide long- duration energy storage for the tight confines of urban settings, where space is at a premium," said Imre Gyuk, energy storage program manager at the U.S. Dept. of Energy (DOE)'s Office of Electricity Delivery and Energy Reliability, which funded this research. "This would enhance the resiliency and flexibility of the local electrical grid." "Another, unexpected bonus of this electrolyte's high energy density is it could potentially expand the use of flow batteries into mobile applications such as powering trains and cars," said the study's corresponding author, Wei Wang, a materials scientist at DOE's Pacific Northwest National Laboratory (PNNL). Going with the flow Both flow and lithium-ion batteries were invented in the 1970s, but only the lithium-ion variety took off at that time. Lithium-ion batteries could carry much more energy in a smaller space than flow batteries, making them more versatile. As a result, lithium-ion batteries have been used to power portable electronics for many years. And utilities have begun using them to store the increasing amounts of renewable energy generated at wind farms and solar power facilities. But the high-energy lithium-ion batteries' packaging can make them prone to overheating and catching fire. Flow batteries, on the other hand, store their active chemicals separately until power is needed, greatly reducing safety concerns. This feature has prompted researchers and developers to take a serious second look at flow batteries. https://www.youtube.com/watch?v=lAW-mMsCNlU&feature=youtu.be Stacking up against the competition Like other flow batteries, the zinc-polyiodide battery produces power by pumping liquid from external tanks into the battery's stack, a central area where the liquids are mixed. The external tanks in PNNL's new battery hold aqueous electrolytes, watery solutions with dissolved chemicals that store energy. When the battery is fully discharged, both tanks hold the same electrolyte solution: a mixture of the positively charged zinc ions, Zn2+, and negatively charged iodide ion, I-. But when the battery is charged, one of the tanks also holds another negative ion, polyiodide, I3-. When power is needed, the two liquids are pumped into the central stack. Inside the stack, zinc ions pass through a selective membrane and change into metallic zinc on the stack's negative side. This process converts energy that's chemically stored in the electrolyte into electricity that can power buildings and support the power grid's operations. To test the feasibility of their new battery concept, Wei and his PNNL colleagues created a small battery on a lab countertop. They mixed the electrolyte solution, separating a black zinc- polyiodide liquid and a clear zinc-iodide liquid in two glass vials as miniature tanks. Hoses were connected between the vials, a pump and a small stack. They put the 12-watt-hour capacity battery—comparable to about two iPhone batteries—through a series of tests, including determining how different concentrations of zinc and iodide in the electrolyte affected energy storage. Electrical capacity is measured in watt-hours; electric cars use about 350 watt-hours to drive one mile in the city. More power to it The demonstration battery put out far more energy for its size than today's most commonly used flow batteries: the zinc-bromide battery and the vanadium battery. PNNL's zinc-polyiodide battery also had an energy output that was about 70% that of a common lithium-ion battery called a lithium iron phosphate battery, which is used in portable electronics and in some small electric vehicles. Lab tests revealed the demonstration battery discharged 167 watt-hours per liter of electrolyte. In comparison, zinc-bromide flow batteries generate about 70 watt-hours per liter, vanadium flow batteries can create between 15 and 25 watt-hours per liter, and standard lithium iron phosphate batteries could put out about 233 watt-hours per liter. Theoretically, the team calculated their new battery could discharge even more—up to 322 watt-hours per liter—if more chemicals were dissolved in the electrolyte. Safe and versatile, but not perfect yet PNNL's zinc-polyiodide battery is also safer because its electrolyte isn't acidic like most other flow batteries. It's nearly impossible for the water-based electrolyte to catch fire and it doesn't require expensive materials that are needed to withstand the corrosive nature of other flow batteries. Another advantage of PNNL's new flow battery is that it can operate in extreme climates. The electrolyte allows it to work well in temperatures as cold as -4 F and as warm as +122 degrees. Many batteries have much smaller operating windows and can require heating and cooling systems, which cut into a battery's net power production. One problem the team encountered was a build-up of metallic zinc that grew from the central stack's negative electrode and went through the membrane, making the battery less efficient. Researchers reduced the buildup, called zinc dendrite, by adding alcohol to the electrolyte solution. Managing zinc dendrite formation will be a key in enabling PNNL's zinc-polyiodide battery to be used in the real world. Wei and his colleagues will continue to experiment with different alcohols and other additives and use advanced instruments to characterize how the battery's materials respond to those additives. The team will also build a larger, 100-watt-hour model of the battery for additional testing. Source: Pacific Northwest National Laboratory Topics • Pacific Northwest National Laboratory (DOE) .
Load more

Recommended publications
  • Characterization of Battery for Energy Storage Applications – Lead Acid
    Abstract #1672, 224th ECS Meeting, © 2013 The Electrochemical Society Characterization of battery for energy storage applications curves of a lead acid battery (YUASA, NP4-6). It has a – lead acid battery, lithium battery, vanadium redox normal voltage of 6 V and capacity of 4 Ah. The battery flow battery, and capacitor power was drained at 0.5 A till the cell voltage down to 3.0 V. The E-I curve was recorded by linear scanning Chih-Lung Hsieh1, Yen-Ting Liu2, Kan-Lin Hsueh2, amperometry at scanning rate of 0.01 A/s. The battery is Ju-Shei Hung3 then charge at 0.5 A for 2 hours. The SOC was assumed reached 25%. The E-I curve was then recorded. This 1. Institute of Nuclear Energy Research, Taoyuan, Taiwan procedure was carried out for SOC at 50%, 75%, and 2. Dept. Energy Eng., National United University, Miaoli, 100%. When cell voltage reached 7.0 V during charge Taiwan was considered as 100% SOC. Curves shown on Fig. 2 3. Dept. Chem. Eng., National United University, Miaoli, was measured result of laed acid battery. These curves Taiwan can be described by following equations. Where the IR accounts for internal resistance. Last term of equation [1] is the voltage cahge due to acitvation over-potential. The purpose of this study is to measure the charge/discharge characteristics of four different During Charge components for energy storage application. They are lead RT nF E E 1 iRI o ln o exp[ )]( [1] acid battery, lithium battery, vanadium redox flow battery, nF SO 2 H 4 RT [ 4 [] ] and capacitor.
    [Show full text]
  • Current State and Future Prospects for Electrochemical Energy Storage and Conversion Systems
    energies Review Current State and Future Prospects for Electrochemical Energy Storage and Conversion Systems Qaisar Abbas 1 , Mojtaba Mirzaeian 2,3,*, Michael R.C. Hunt 1, Peter Hall 2 and Rizwan Raza 4 1 Centre for Materials Physics, Department of Physics, Durham University, Durham DH1 3LE, UK; [email protected] (Q.A.); [email protected] (M.R.H.) 2 School of Computing, Engineering and Physical Sciences, University of the West of Scotland, Paisley PA1 2BE, UK; [email protected] 3 Faculty of Chemistry and Chemical Technology, Al-Farabi Kazakh National University, Al-Farabi Avenue, 71, Almaty 050040, Kazakhstan 4 Clean Energy Research Lab (CERL), Department of Physics, COMSATS University Islamabad, Lahore 54000, Pakistan; [email protected] * Correspondence: [email protected] Received: 30 September 2020; Accepted: 26 October 2020; Published: 9 November 2020 Abstract: Electrochemical energy storage and conversion systems such as electrochemical capacitors, batteries and fuel cells are considered as the most important technologies proposing environmentally friendly and sustainable solutions to address rapidly growing global energy demands and environmental concerns. Their commercial applications individually or in combination of two or more devices are based on their distinguishing properties e.g., energy/power densities, cyclability and efficiencies. In this review article, we have discussed some of the major electrochemical energy storage and conversion systems and encapsulated their technological advancement in recent years. Fundamental working principles and material compositions of various components such as electrodes and electrolytes have also been discussed. Furthermore, future challenges and perspectives for the applications of these technologies are discussed.
    [Show full text]
  • Recent Progress in Vanadium Redox-Flow Battery Katsuji Emura1 Sumitomo Electric Industries, Ltd., Osaka, Japan
    Recent Progress in Vanadium Redox-Flow Battery Katsuji Emura1 Sumitomo Electric Industries, Ltd., Osaka, Japan 1. Introduction Vanadium Redox Flow Battery (VRB) is an energy storage system that employs a rechargeable vanadium fuel cell technology. Since 1985, Sumitomo Electric Industries Ltd (SEI) has developed VRB technologies for large-scale energy storage in collaboration with Kansai Electric power Co. In 2001, SEI has developed 3MW VRB system and delivered it to a large liquid crystal display manufacturing plant. The VRB system provides 3MW of power for 1.5 seconds as UPS (Uninterruptible Power Supply) for voltage sag compensation and 1.5MW of power for 1hr as a peak shaver to reduce peak load. The VRB system has successfully compensated for 50 voltage sag events that have occurred since installation up until September 2003. 2. Principle of VRB The unique chemistry of vanadium allows it to be used in both the positive and negative electrolytes. Figure 1 shows a schematic configuration of VRB system. The liquid electrolytes are circulated through the fuel cells in a similar manner to that of hydrogen and oxygen in a hydrogen fuel cell. Similarly, the electrochemical reactions occurring within the cells can produce a current flow in an external circuit, alternatively reversing the current flow results in recharging of the electrolytes. These cell reactions are balanced by a flow of protons or hydrogen ions across the cell through a selective membrane. The selective membrane also serves as a physical barrier keeping the positive and negative vanadium electrolytes separate. Figure 2 shows a cell stack which was manufactured by SEI.
    [Show full text]
  • Battery Technologies for Small Scale Embeded Generation
    Battery Technologies for Small Scale Embedded Generation. by Norman Jackson, South African Energy Storage Association (SAESA) Content Provider – Wikipedia et al Small Scale Embedded Generation - SSEG • SSEG is very much a local South African term for Distributed Generation under 10 Mega Watt. Internationally they refer to: Distributed generation, also distributed energy, on-site generation (OSG) or district/decentralized energy It is electrical generation and storage performed by a variety of small, grid- connected devices referred to as distributed energy resources (DER) Types of Energy storage: • Fossil fuel storage • Thermal • Electrochemical • Mechanical • Brick storage heater • Compressed air energy storage • Cryogenic energy storage (Battery Energy • Fireless locomotive • Liquid nitrogen engine Storage System, • Flywheel energy storage • Eutectic system BESS) • Gravitational potential energy • Ice storage air conditioning • Hydraulic accumulator • Molten salt storage • Flow battery • Pumped-storage • Phase-change material • Rechargeable hydroelectricity • Seasonal thermal energy battery • Electrical, electromagnetic storage • Capacitor • Solar pond • UltraBattery • Supercapacitor • Steam accumulator • Superconducting magnetic • Thermal energy energy storage (SMES, also storage (general) superconducting storage coil) • Chemical • Biological • Biofuels • Glycogen • Hydrated salts • Starch • Hydrogen storage • Hydrogen peroxide • Power to gas • Vanadium pentoxide History of the battery This was a stack of copper and zinc Italian plates,
    [Show full text]
  • 2020 Grid Energy Storage Technology Cost and Performance Assessment
    Energy Storage Grand Challenge Cost and Performance Assessment 2020 December 2020 2020 Grid Energy Storage Technology Cost and Performance Assessment Kendall Mongird, Vilayanur Viswanathan, Jan Alam, Charlie Vartanian, Vincent Sprenkle*, Pacific Northwest National LaBoratory. Richard Baxter, Mustang Prairie Energy * [email protected] Technical Report Publication No. DOE/PA-0204 December 2020 Energy Storage Grand Challenge Cost and Performance Assessment 2020 December 2020 Disclaimer This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States government. ii Energy Storage Grand Challenge Cost and Performance Assessment 2020 December 2020 Acronyms AC alternating current Ah ampere-hour BESS battery energy storage system BLS U.S. Bureau of Labor Statistics BMS battery management system BOP balance of plant BOS balance of system C&C controls & communication C&I civil and infrastructure CAES compressed-air energy
    [Show full text]
  • Enhanced Cycling Performance of Rechargeable Zinc–Air Flow Batteries Using Potassium Persulfate As Electrolyte Additive
    International Journal of Molecular Sciences Article Enhanced Cycling Performance of Rechargeable Zinc–Air Flow Batteries Using Potassium Persulfate as Electrolyte Additive Ramin Khezri 1 , Soraya Hosseini 1, Abhishek Lahiri 2, Shiva Rezaei Motlagh 3, Mai Thanh Nguyen 4 , Tetsu Yonezawa 4,5 and Soorathep Kheawhom 1,6,* 1 Department of Chemical Engineering, Faculty of Engineering, Chulalongkorn University, Bangkok 10330, Thailand; [email protected] (R.K.); [email protected] (S.H.) 2 Department of Chemical Engineering, Brunel University London, London UB8 3PH, UK; [email protected] 3 Department of Chemical Engineering, Faculty of Engineering, Universiti Putra Malaysia, Selangor 43300, Malaysia; [email protected] 4 Division of Materials Science and Engineering, Faculty of Engineering, Hokkaido University, Hokkaido 060-8628, Japan; [email protected] (M.T.N.); [email protected] (T.Y.) 5 Institute for the Promotion of Business-Regional Collaboration, Hokkaido University, Sapporo 001-0021, Japan 6 Research Unit of Advanced Materials for Energy Storage, Chulalongkorn University, Bangkok 10330, Thailand * Correspondence: [email protected] Received: 3 September 2020; Accepted: 1 October 2020; Published: 2 October 2020 Abstract: Zinc–air batteries (ZABs) offer high specific energy and low-cost production. However, rechargeable ZABs suffer from a limited cycle life. This paper reports that potassium persulfate (KPS) additive in an alkaline electrolyte can effectively enhance the performance and electrochemical characteristics of rechargeable zinc–air flow batteries (ZAFBs). Introducing redox additives into electrolytes is an effective approach to promote battery performance. With the addition of 450 ppm KPS, remarkable improvement in anodic currents corresponding to zinc (Zn) dissolution and limited passivation of the Zn surface is observed, thus indicating its strong effect on the redox reaction of Zn.
    [Show full text]
  • High Current Density Redox Flow Batteries for Stationary Electrical Energy Storage
    PNNL REPORT PNNL-23819-4 Unlimited Release High Current Density Redox Flow Batteries for Stationary Electrical Energy Storage Milestone Report for the DOE-OE Energy Storage Systems Program (FY16 Quarter 4: October 2015 through September 2016) David Reed, Ed Thomsen, Vilayanur Viswanathan, Wei Wang, Zimin Nie and Vincent Sprenkle Prepared by Pacific Northwest National Laboratory Richland, Washington 99354 Pacific Northwest National Laboratory is a multi-program laboratory managed and operated by Battelle Memorial Institute for the U.S. Department of Energy under contract DE-AC05-76RL01830. Approved for public release; further dissemination unlimited. Issued by Pacific Northwest National Laboratory, operated for the United States Department of Energy by Battelle Memorial Institute NOTICE: This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government, nor any agency thereof, nor any of their employees, nor any of their contractors, subcontractors, or their employees, make any warranty, express or implied, or assume any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represent that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise, does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government, any agency thereof, or any of their contractors or subcontractors. The views and opinions expressed herein do not necessarily state or reflect those of the United States Government, any agency thereof, or any of their contractors.
    [Show full text]
  • Vanadium Redox Flow Batteries: a Review Oriented to Fluid-Dynamic Optimization
    energies Review Vanadium Redox Flow Batteries: A Review Oriented to Fluid-Dynamic Optimization Iñigo Aramendia 1,* , Unai Fernandez-Gamiz 1 , Adrian Martinez-San-Vicente 1, Ekaitz Zulueta 2 and Jose Manuel Lopez-Guede 2 1 Nuclear Engineering and Fluid Mechanics Department, University of the Basque Country UPV/EHU, Nieves Cano 12, 01006 Vitoria-Gasteiz, Spain; [email protected] (U.F.-G.); [email protected] (A.M.-S.-V.) 2 Automatic Control and System Engineering Department, University of the Basque Country UPV/EHU, Nieves Cano 12, 01006 Vitoria-Gasteiz, Spain; [email protected] (E.Z.); [email protected] (J.M.L.-G.) * Correspondence: [email protected]; Tel.: +34-945-014-066 Abstract: Large-scale energy storage systems (ESS) are nowadays growing in popularity due to the increase in the energy production by renewable energy sources, which in general have a random intermittent nature. Currently, several redox flow batteries have been presented as an alternative of the classical ESS; the scalability, design flexibility and long life cycle of the vanadium redox flow battery (VRFB) have made it to stand out. In a VRFB cell, which consists of two electrodes and an ion exchange membrane, the electrolyte flows through the electrodes where the electrochemical reactions take place. Computational Fluid Dynamics (CFD) simulations are a very powerful tool to develop feasible numerical models to enhance the performance and lifetime of VRFBs. This review aims to present and discuss the numerical models developed in this field and, particularly, to analyze different types of flow fields and patterns that can be found in the literature.
    [Show full text]
  • Membraneless Flow Battery Leveraging Flow- Through Heterogeneous Porous Media for Improved Power Density and Reduced Crossover
    Membraneless flow battery leveraging flow- through heterogeneous porous media for improved power density and reduced crossover The MIT Faculty has made this article openly available. Please share how this access benefits you. Your story matters. Citation Suss, M. E. et al. “Membraneless Flow Battery Leveraging Flow- through Heterogeneous Porous Media for Improved Power Density and Reduced Crossover.” RSC Adv. 6, 102 (2016): 100209–100213. © 2016 The Royal Society of Chemistry As Published http://dx.doi.org/10.1039/C6RA22608F Publisher Royal Society of Chemistry (RSC) Version Author's final manuscript Citable link http://hdl.handle.net/1721.1/112210 Terms of Use Creative Commons Attribution-Noncommercial-Share Alike Detailed Terms http://creativecommons.org/licenses/by-nc-sa/4.0/ Membraneless flow battery leveraging flow-through heterogeneous porous media for improved power density and reduced crossover M.E. Suss,a K. Conforti,a L. Gilson,b C.R. Buie,b and M.Z. Bazant,a,c,* a Department of Chemical Engineering, MIT, Cambridge, MA, USA b Department of Mechanical Engineering, MIT, Cambridge, MA, USA c Department of Mathematics, MIT, Cambridge, MA, USA * Corresponding author, Email: [email protected] Abstract A key factor preventing the market penetration of renewable, intermittent energy sources, such as solar, wind and wave, is the lack of cost-effective energy storage options to counteract intermittency. Here, we propose and demonstrate a novel flow battery architecture that replaces traditional ion-exchange membranes with less expensive heterogeneous flow-through porous media. We present an experimentally-validated model which demonstrates that our architecture promises reduced crossover of reactive species compared to typical membraneless systems employing co-laminar flows in open channels.
    [Show full text]
  • Characterization of Carbon Felt Electrodes for Vanadium Redox Flow Batteries T – a Pore Network Modeling Approach ⁎ R
    Journal of Energy Storage 21 (2019) 163–171 Contents lists available at ScienceDirect Journal of Energy Storage journal homepage: www.elsevier.com/locate/est Characterization of carbon felt electrodes for vanadium redox flow batteries T – A pore network modeling approach ⁎ R. Banerjeea, , N. Bevilacquaa, L. Eiferta, R. Zeisa,b a Karlsruhe Institute of Technology, Helmholtz Institute Ulm, Helmholtzstraße 11, 89081, Ulm, Germany b Karlsruhe Institute of Technology, Institute of Physical Chemistry, Fritz-Haber-Weg 2, 76131, Karlsruhe, Germany ARTICLE INFO ABSTRACT Keywords: Carbon felt electrodes are commonly used as porous electrodes in Vanadium redox flow batteries for large-scale Pore network modeling energy storage. The transport properties of these electrodes are an important parameter as the transport re- Vanadium redox flow battery sistance can form a significant parasitic power loss depending on the configuration of the flow battery. Carbon felt electrodes Therefore, to better predict the overall parasitic power losses and devise strategies for the improvement of Invasion percolation overall battery efficiency, the transport properties need to be properly understood. In this work, fourcom- Electrolyte saturation mercially available carbon felt electrodes have been investigated for their transport properties. It has been shown Transport properties that the non-activated electrode is hydrophobic in nature, while after activation, the electrodes become hy- drophilic. The single-phase diffusion and permeability were found to decrease linearly with an increasein electrode thickness. The imbibition characteristics were similar for the four electrodes, although the change in wettability had a strong impact on the pressure required for the electrolyte to invade into the electrode. 2+ 3 + 1.
    [Show full text]
  • Design, Fabrication and Electrochemical Performance of Soluble Lead Redox-Flow Battery for Energy Storage
    Proceedings of the National Power Systems Conference (NPSC) - 2018, December 14-16, NIT Tiruchirappalli, India Design, Fabrication and Electrochemical performance of Soluble Lead Redox-Flow Battery for Energy Storage Shivangi Kosta R Sneha Kuldeep Rana Electrical Appliances Technology Electrical Appliances Technology Electrical Appliances Technology Division Division Division Central Power Research Institute Central Power Research Institute Central Power Research Institute Bangalore, India Bangalore, India Bangalore, India [email protected] [email protected] [email protected] Single electrolyte, single pump and absence of membrane Abstract - Flow batteries are being considered as a potential reduces the cost of the system and makes it less candidate for large scale energy storage system, however, complicated as compared with other flow batteries. It can main issue with them is their higher cost due to the electrode also be operated without any separable membrane leading materials and membrane used in them. In this regards, current work is focused on the development of cost effective to decrease in the cost as well as the usage of cell flow batteries. In order to reduce the cost of flow batteries, equipment; overall simplifies the cell design. The low cost graphitic carbon was used for both positive and performance of the cell is completely based on the negative electrodes to fabricate the soluble lead redox flow fabrication and structure of the electrodes and the batteries (100 cm2) without using any separator. Lead electrolyte composition [8]. The reaction site and the methane sulfonate (1M) and methane sulfonic acid (1M) were current collector membrane determine battery power used as electrolytes, which plays an important role in whereas volume of the electrolyte tank gives battery reduction and oxidation process of redox flow batteries.
    [Show full text]
  • Fundamental Flow Battery Studies
    FUNDAMENTAL FLOW BATTERY STUDIES: ELECTRODES AND ELECTROLYTES By MALLORY A. MILLER Submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy Dissertation Advisor: Dr. Robert F. Savinell Department of Chemical and Biomolecular Engineering CASE WESTERN RESERVE UNIVERSITY May, 2017 CASE WESTERN RESERVE UNIVERSITY DISSERTATION APPROVAL We hereby approve the thesis/dissertation of ___________________Mallory A. Miller___________________ Candidate for the Doctor of Philosophy degree* _______________Professor Robert Savinell_______________ _______________Professor Jesse Wainright_______________ ________________Professor Burcu Gurkan________________ ________________Professor Mark DeGuire________________ Date _____December 13, 2016_____ *We also certify that written approval has been obtained for any proprietary material contained therein. II Dedication To my mother for always believing in me and for her encouragement and support. III Table of Contents Acknowledgements .................................................................................................................. VIII List of Tables ............................................................................................................................... IX List of Figures ............................................................................................................................ XII Abbreviations ........................................................................................................................ XXIV Abstract
    [Show full text]