DOCSLIB.ORG

White CSA CEMENT Calcium Sulfo Aluminate

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
White CSA CEMENT Calcium Sulfo Aluminate ® white CSA CEMENT Calcium Sulfo Aluminate An innovation in cement technology for aesthetic and technical applications. is a special Calcium Sulfo Aluminate cement (CSA) designed for decorative concrete, terrazzo, flooring, glass fiber reinforced concrete (GFRC), dry-mixed mortars, architectural precast, fiber cement and more. Specially selected high purity raw materials, optimized calcination and carefully monitored grinding guarantee a consistent white color. Features: • Fast setting • High early strength (1-day strength equals the 28-day strength of ordinary cement) • Continuous strength development (no loss of strength in time) • Rapid drying (C4A3Š autogenously binds excess water) • Shrinkage compensated – (little to NO shrinkage) • Low alkali Benefits: • Ideal for making “ fast set concrete” • Allows for quick-demolding • Rapid return to service • Compatible with various aggregates • Reduces efflorescence Calcium Sulfoaluminate Cement increases strength, reduces set times, and decreases shrinkage of concrete mix designs. ,used as a stand-alone binder or blended with white portland cement delivers high early strength to incredibly durable concrete and mortar. Conventional retarding admixtures can be used to increase working time sacrificing early strength development Special Cement Department CALTRA US.- exclusive distributor; DELTA PERFORMANCE 9126 Industrial Blvd.,Suite B , Covington, GA 30014 T: +1 678 729 9330 F:+1 678 729 9336 M:+1 770 231 2674 W: www.caltra.com ® Calcium Sulfoaluminate Cement is ideal for applications requiring high early strength and rapid setting. Concrete and mortar formulated with CSA cement are capable of obtaining the 28-day strength of ordinary cement in just one day. Suitable projects include: • Concrete runway repair • Bridge deck repair • Tunneling • Roadway repairs • Non-shrink grout • Concrete floor overlayment • Concrete repair mortar Low Carbon Footprint The amount of energy used to produce Calcium Sulfoaluminate Cement is significantly lower than for portlandcement. Portlandcement requires kiln temperatures of more than 1,500° (2,700° F)whereas CSA cement kiln temperatures are around 1,250°C (2,250°F). CSA clinker is softer than portlandcement clinker, requiring less energy to grind. These factors contribute to significant energy savings which delivers a carbon footprint 33% smaller than portlandcement. Zero to Low Shrinkage CSA cement achieves higher early strength than portlandcement allowing for the formulation of non-shrink and low-shrinkage concrete and mortar products. CSA cement utilizes nearly 100% of the mix water during hydration process, leaving very little water to contribute towards shrinkage. Hydration temperature is considerable lower than comparable quick setting systems Additionally, because of high early strength development, little or no shrinkage occurs after initial set. Delivered in 44 lbs./20 kg. plastic bags Or super sacks 1,38 short ton/1,25 metric ton - on wooden pallets. Store in a dry place – do not stack pallets When stored properly shelve life is up to 6 months. Delivery rail cart or bulk truck upon request. Information and recommendations are based upon our experience and are offered merely for advise. It does not guarantee certain properties and is based on present state of our knowledge, and does not absolve the end-user from making his/her own testing prior to use. CALTRA US Llc. can not be held responsible for any damage arising from the use of her goods. .
Load more

Recommended publications
  • White Concrete & Colored Concrete Construction
    WHITE CEMENT CONCRETE AND COLORED CONCRETE CONSTRUCTION and developers Owners seeking dynamic architectural results demand the benefits that only white or colored concrete can deliver. Informed designers rely on careful selection of materials and attention to mixing and placement details to achieve eye-catching architectural and decorative finishes. Because of its versatility, concrete offers endless design possibilities. A wide variety of decorative looks are achieved by using colored aggregates and pigments, and by varying surface finishes, treatments, and textures. Combining white cement with pigments and colored aggregates expands the number of colors available to discerning customers. Colors are cleaner and more intense because pigments and specialty Figure 1. The Condell Medical Center is built with load-bearing precast concrete aggregates don’t have to overcome the panels with an architectural finish achieved by using white cement. grayish paste of common concrete. Courtesy of Condell Medical Center. Mix Designs • CSA A3000 cements that conform to the Canadian From a structural design perspective, white cement-based Standards Association standards for Cementitious Materials concrete mixes are identical to gray cement-based mixes. Mix • American Association of State Highway and Transportation designs for white or colored concrete differ from common Officials, AASHTO M85 Standard Specification for Portland concrete in that they are formulated based on each ingredient’s Cement effect on concrete color. Listed in order of decreasing
    [Show full text]
  • Cement Data Sheet
    42 CEMENT (Data in thousand metric tons unless otherwise noted) Domestic Production and Use: In 2019, U.S. portland cement production increased by 2.5% to 86 million tons, and masonry cement production continued to remain steady at 2.4 million tons. Cement was produced at 96 plants in 34 States, and at 2 plants in Puerto Rico. U.S. cement production continued to be limited by closed or idle plants, underutilized capacity at others, production disruptions from plant upgrades, and relatively inexpensive imports. In 2019, sales of cement increased slightly and were valued at $12.5 billion. Most cement sales were to make concrete, worth at least $65 billion. In 2019, it was estimated that 70% to 75% of sales were to ready-mixed concrete producers, 10% to concrete product manufactures, 8% to 10% to contractors, and 5% to 12% to other customer types. Texas, California, Missouri, Florida, Alabama, Michigan, and Pennsylvania were, in descending order of production, the seven leading cement-producing States and accounted for nearly 60% of U.S. production. Salient Statistics—United States:1 2015 2016 2017 2018 2019e Production: Portland and masonry cement2 84,405 84,695 86,356 86,368 88,500 Clinker 76,043 75,633 76,678 77,112 78,000 Shipments to final customers, includes exports 93,543 95,397 97,935 99,406 100,000 Imports of hydraulic cement for consumption 10,376 11,742 12,288 13,764 15,000 Imports of clinker for consumption 879 1,496 1,209 967 1,100 Exports of hydraulic cement and clinker 1,543 1,097 1,035 940 1,000 Consumption, apparent3 92,150 95,150 97,160 98,480 102,000 Price, average mill value, dollars per ton 106.50 111.00 117.00 121.00 123.50 Stocks, cement, yearend 7,230 7,420 7,870 8,580 8,850 Employment, mine and mill, numbere 12,300 12,700 12,500 12,300 12,500 Net import reliance4 as a percentage of apparent consumption 11 13 13 14 15 Recycling: Cement is not recycled, but significant quantities of concrete are recycled for use as a construction aggregate.
    [Show full text]
  • Gray Portland Cement and Cement Clinker from Japan
    Gray Portland Cement and Cement Clinker from Japan Investigation No. 731-TA-461 (Fourth Review) Publication 4704 June 2017 U.S. International Trade Commission Washington, DC 20436 U.S. International Trade Commission COMMISSIONERS Rhonda K. Schmidtlein, Chairman David S. Johanson, Vice Chairman Irving A. Williamson Meredith M. Broadbent F. Scott Kieff Catherine DeFilippo Director of Operations Staff assigned Carolyn Carlson, Investigator Gregory LaRocca, Industry Analyst Andrew Knipe, Economist Heng Loke, Attorney Fred Ruggles, Supervisory Investigator Address all communications to Secretary to the Commission United States International Trade Commission Washington, DC 20436 U.S. International Trade Commission Washington, DC 20436 www.usitc.gov Gray Portland Cement and Cement Clinker from Japan Investigation No. 731-TA-461 (Fourth Review) Publication 4704 June 2017 CONTENTS Page Determination .............................................................................................................................1 Views of the Commission .............................................................................................................3 Information obtained in the review ........................................................................................... I-1 Background ...................................................................................................................................... I-1 Responses to the Commission's notice of institution .....................................................................
    [Show full text]
  • Use of Cement Kiln Dust for Subgrade Stabilization
    Report No. KS-04-3 FINAL REPORT USE OF CEMENT KILN DUST FOR SUBGRADE STABILIZATION Robert L. Parsons, Ph.D., P.E. Elizabeth Kneebone University of Kansas Justin P. Milburn Continental Consulting Engineers, Inc. OCTOBER 2004 KANSAS DEPARTMENT OF TRANSPORTATION Division of Operations Bureau of Materials and Research 1 Report No. 2 Government Accession No. 3 Recipient Catalog No. KS-04-3 4 Title and Subtitle 5 Report Date USE OF CEMENT KILN DUST FOR SUBGRADE STABILIZATION October 2004 6 Performing Organization Code 7 Author(s) 8 Performing Organization Report Robert L. Parsons, Ph.D., P.E., Elizabeth Keebone, both of University of No. Kansas, and Justin P. Milburn, Continental Consulting Engineers, Inc. 9 Performing Organization Name and Address 10 Work Unit No. (TRAIS) University of Kansas 1530 West 15th Street; Learned Hall 11 Contract or Grant No. Lawrence, Kansas 66045-7609 C1378 12 Sponsoring Agency Name and Address 13 Type of Report and Period Kansas Department of Transportation Covered Bureau of Materials and Research Final Report 700 SW Harrison Street October 2002 to July 2004 Topeka, Kansas 66603-3754 14 Sponsoring Agency Code RE-0331-01 15 Supplementary Notes Fly Ash Management. L.L.C., of Topeka, Kansas also provided funding for this project. For more information on this report, please write to address in block 9. 16 Abstract Poor subgrade soil conditions can result in inadequate pavement support and reduce pavement life. Soils may be improved through the addition of chemical or cementitious additives. These chemical additives range from waste products to manufactured materials and include lime, Class C fly ash, Portland cement, cement kiln dust from pre-calciner and long kiln processes, and proprietary chemical stabilizers.
    [Show full text]
  • Carbon Dioxide Control Technologies for the Cement Industry Volker Hoenig, Düsseldorf, Germany
    Carbon Dioxide Control Technologies for the Cement Industry Volker Hoenig, Düsseldorf, Germany GCEP Workshop “Carbon Management in Manufacturing Industries” Stanford University, 15/16 April 2008 Carbon Dioxide Control Technologies for the Cement Industry 1. Introduction 2. The cement clinker burning process 3. Assessment of carbon dioxide control technologies 3.1 Pre-combustion technologies 3.2 Oxyfuel technology 3.3 Post-combustion technologies 4. Preliminary research results (Oxyfuel technology) 4.1 Impact on raw meal decarbonation 4.2 Modeling of the clinker burning process with Oxyfuel operation The German Cement Works Association (VDZ) Activities: • Mortar and concrete • Chemistry and mineralogy • Environmental expertise • Plant technology investigations • Environmental measurements • Certification • Knowledge transfer ↑ The Research Institute of the Cement Industry, Düsseldorf / Germany For further information: www.vdz-online.de The European Cement Research Academy (ECRA) • has been founded by VDZ in 2004 • Members (> 40) are cement companies and associations from Europe, Asia, Australia, US • objectives Æ know how transfer Æ joint research • activities Æ seminars and workshops Æ research programmes - carbon capture technologies for the cement industry - continuous measurement of biomass CO2 in stack gases For further information: www.ecra-online.org Carbon Dioxide Control Technologies for the Cement Industry 1. Introduction 2. The cement clinker burning process 3. Assessment of carbon dioxide control technologies 3.1 Pre-combustion
    [Show full text]
  • Portland Cements CAS Reg
    3251 Bath Pike Nazareth, PA 18064 MATERIAL SAFETY DATA SHEET Section 1 - IDENTIFICATION Product Name: Portland Cements CAS Reg. No.: 65997-15-1 Chemical Name and Synonyms: Portland Cement, Cement, Hydraulic Cement Trade Names: Portland Cement – Types I, IA, II, III, IIIA, GU, MS,LH, HE; SAYLOR’S Portland Types: I, IA, II, III; PRONTO, Flamingo Brixment White Portland Cement; Oil Well Cement Class A, H. MSDS Information: This MSDS supersedes prior MSDS’s for the products noted above. This MSDS covers a number of products with similar applications and occupational exposure hazards. Specific constituents and methods of preparation for these products will vary. The term “Portland Cement”, used in the text of this MSDS, refers to the above named products collectively. Chemical Family: Calcium silicate compounds; calcium compounds containing iron and aluminum; and gypsum are the primary constituents of these products. Informational Phone Numbers: (800) 437-7762 Customer Service - Nazareth, PA (800) 336-0366 Customer Service - Speed, IN (800) 624-8986 Customer Service - Martinsburg, WV (800) 386-2111 Customer Service - Mississauga, ONT Emergency Contact Information: (800)-424-9300 Chemtrec MSDS Prepared by: Essroc MSDS Development Committee - (610) 837-6725 – May 9, 2013 Section 2 - COMPONENTS Hazardous Ingredients: Component CAS No. OSHA PEL (8-hour TWA) ACGIH TLV Other Information Portland Cement 65997-15-1 15 mg total dust/m3 1.0 mg/m3 IDLH: 5000 mg/m3 3 5 mg respirable dust/m respirable LD50: No Data Gypsum 13397-24-5 15 mg total dust/m3
    [Show full text]
  • WHITE PORTLAND CEMENT TYPE I Durable, Dependable, Cost-Effective Basic Building Material
    WHITE PORTLAND CEMENT TYPE I Durable, dependable, cost-effective basic building material 1. PRODUCT NAME Mixing Tech-Mix® White Portland Cement (Type I) Refer to the mix designs chart for typical proportions by volume per appropriate application. Add the minimum amount 2. MANUFACTURER of clean water necessary, too much water will weaken the Tech-Mix® is a registered trademark of TCC Materials product. Mix until uniform, workable consistency is reached. 2025 Centre Pointe Blvd., Suite 300 Mendota Heights, MN 55120 USA Typical Mix Designs by Volume Phone: 1.651.688.9116 Web: techmixpro.com Concrete Mix Portland Cement General Purpose Gravel or Stone 3. PRODUCT DESCRIPTION Sand (ASTM C-33) (ASTM C-33) Tech-Mix ® White Portland Cement Type I are regularly used to produce architectural concrete. General applications include 1 Part 2 Parts 3 Parts cast-in-place or precast wall panels, floors, slabs, terrazzo, thin Mortar Mix (Type S, ASTM C-270) -set and tile grouts, cast stone, masonry units and mortars, stucco, swimming pools & spas, glass fiber reinforced Portland Cement Hydrated Lime Masonry Sand concrete, ornamental statuary, floor tiles, concrete roof tiles, Type S (ASTM C-144) perimeter security, pavers and traffic safety items such as concrete median barriers, bridge parapets, pedestrian 1 Part ½ Part 3½ - 4½ Parts crosswalks, curbs and other delineators. White cement is often Stucco Mix (Scratch & Brown ASTM C-926) used to produce bright finishes, vibrant colors or ultra high Washed Plaster performance concretes that look great and provide structural Hydrated Lime Portland Cement Sand performance that make them ideal for resilient building Type S applications.
    [Show full text]
  • White Cement - Properties, Manufacture, Prospects
    Review paper WHITE CEMENT - PROPERTIES, MANUFACTURE, PROSPECTS KARTEŘINA MORESOVÁ, FRANTIŠEK ŠKVÁRA Department of Glass and Ceramics, Institute of Chemical Technology, Technická 5, 166 28 Prague 6, Czech Republic E-mail: [email protected] Submitted January 6, 2000; accepted March 12, 2001. Keywords: White cement, Review, Properties INTRODUCTION stage and must also exhibit whiteness corresponding to cement of the given class. The raw materials, the Special cements differ from conventional Portland intermediate product and the final product must also be cements in their chemical and phase composition as protected from contamination at all stages of the well as in their properties. Their properties can be technology. The initial composition of the raw materials achieved by using a modified raw material mix, a or their properties are dealt with e.g. by [9 - 16]. grinding admixture or by adjusting the grinding fineness White cement may be manufactured with of the cement. Special cements include a number of standardized surface-active plasticizers or hydrophobic cements whose production volumes are considerably additives (in amounts of up to 0.5 wt.%) not impairing lower compared to those of conventional cements (max. the whiteness of the product. According to the 5 to 10 %). However, they constitute a significant part whiteness degree, white cement is divided into three of the assortment supplementing the conventional groups of the reflection coefficient: I. min. 80 %, II. cement. These materials include cements with high min. 75 % and III. min. 68 %. The whiteness degree is early strengths, sulphate-resistant Portland cements, determined according to the reflection coefficient in road cements, white cement and coloured cements, percent of the absolute scale.
    [Show full text]
  • Cement Kiln and Waste to Energy Incineration of Spent Media Craig Patterson1, Seyed A
    Cement Kiln and Waste to Energy Incineration of Spent Media Craig Patterson1, Seyed A. Dastgheib2 1U.S. Environmental Protection Agency, Center for Environmental Solutions and Emergency Response 2Illinois State Geological Survey, University of Illinois at Urbana-Champaign THERMAL TREATMENT OF PFAS STATE OF THE SCIENCE WORKSHOP Sponsored by U.S. Environmental Protection Agency's (EPA) Office of Research and Development (ORD) and Department of Defense SERDP/ESTCP Programs Cincinnati, Ohio February 25, 2020 Project Focus: Incineration of PFAS-laden Ion Exchange Resins with a Lime Sludge Additive PFAS removal from water by ion exchange resins Management of spent PFAS-laden resins Rotary kilns (e.g., cement kilns) for solid waste and waste to energy incineration Incineration of PFAS-laden resin in rotary kilns . HF capture after incineration is needed . Calcium additive can capture fluorine Lime sludge reuse as a low cost additive for fluorine capture during incineration Source: Bernard, B., DiPasquale, M.., From Pilot to Full-Scale: A Case Study for the Treatment of PFC’s with Ion Exchange, AWWA ACE, Denver, CO 2019. 2 PFAS Removal from Water Ion exchange and activated carbon adsorption are identified as the most mature and feasible technologies for PFAS removal Anion exchange resins can be used as a stand-alone treatment or in combination with GAC Anion exchange resins have shown excellent performance for PFAS removal at relatively low EBCTs when compared to GAC Sources: 1) I. Ross et al. A review of merging technologies for remediation of PFASs. Remediation 2018, 28, 101-126. 2) Purolite 3 presentation and case study. F. Boodoo et al.
    [Show full text]
  • POP's Emissions from the Cement Industry
    Formation and Release of POPs in the Cement Industry Second edition 23 January 2006 Page 2 of 200 Table of content Table of content .......................................................................................................................... 2 Acronyms and abbreviations ....................................................................................................... 5 Glossary ........................................................................................................................ 10 Executive summary..................................................................................................................... 12 1. Introduction ........................................................................................................................ 16 1.1 The Cement Sustainability Initiative ............................................................................. 16 1.2 What are PCDD/Fs?....................................................................................................... 18 1.2.1 Properties of dioxins....................................................................................... 20 1.3 Basic assumptions for this investigation........................................................................ 21 2. Cement production process ................................................................................................ 24 2.1 Main processes............................................................................................................... 24 2.1.1 Quarrying.......................................................................................................
    [Show full text]
  • Lehigh White Portland Limestone Cement ASTM 1157 GU
    Lehigh White Portland Limestone Cement ASTM 1157 GU LEHIGH WHITE CEMENT PRODUCTS Lehigh White Cement Company is the Lehigh White Portland Cement makes leading supplier of white cements to the concrete brighter, better-looking and Portland Cement Type I concrete & pool plastering industry. environmentally friendly, without Lehigh White PLC Cement is backed by sacrificing the quality and special Portland Cement Type II/V our reputation for high-quality products attributes you expect from Lehigh that get the job done, every time. White Cement. Portland Limestone Cement Type GU RESPONSIBLE GREEN BUILDING Using White Portland Limestone Cement Portland Limestone Cement has been (PLC), is the smart and environmentally used internationally with great suc- responsible choice. This earth-friendly cess for more than 25 years, and is cement generates about 10% less CO2 now gaining popularity in North than Portland Cements, while delivering America with the increased emphasis great workability and the consistency on sustainable construction practices. that Lehigh White Cement Company Lehigh White Portland Limestone customers have relied upon for decades. Cement allows for the production of sustainable concrete products for PERFORMANCE owners and designers who want a Manufactured with the same care and green option in swimming pools and attention as all our cements, Lehigh architectural concrete products. White PLC meets ASTM C1157 Standard Performance Specification for Hydraulic AVAILABILITY Cement, Type GU and outperforms our Lehigh White Portland Limestone competitors’ Type I in concrete tests. Cement is available in the western United States including CA, NV, AZ USE and HI. To find out if Lehigh White Lehigh White Portland Limestone Cement PLC is available in your area or for can be used in almost any application sales assistance you can email us at where Portland Cement is normally used.
    [Show full text]
  • Fuel Changes in Cement Kilns
    APCAC XVII TECHNICAL CONFERENCE FUEL CHANGES IN CEMENT KILN APPLICATIONS VICTOR J. TURNELL, P.E. ST. LOUIS, MO U.S.A. October 20, 2000 Fuel Changes In Cement Kiln Systems Table of Contents 1. ABSTRACT 3 2. INTRODUCTION 3 3. FUEL PROPERTIES AND CHARACTERISTICS 4 3.1. GASEOUS FUELS 4 3.2. FUEL OILS 5 3.3. COAL 6 3.4. PETROLEUM COKE 7 3.5. SUMMARY OF FUELS 8 4. FUEL CHANGE IMPACTS ON CEMENT QUALITY 11 4.1. ASH EFFECTS 11 4.2. SULFUR EFFECTS 16 5. FUEL CHANGE IMPACTS ON THE CEMENT KILN SYSTEM 20 5.1. OPTIMUM COMBUSTION CHARACTERISTICS 20 5.2. FUEL FINENESS 21 5.3. BURNER DESIGN 22 5.4. CALCINER DESIGN AND MODIFICATION 22 5.4.1. SITUATION 1 26 5.4.2. SITUATION 2 27 5.4.3. SITUATION 3 27 5.5. INCREASE OXYGEN CONCENTRATION IN THE COMBUSTION ZONE 28 5.6. MATERIAL BUILD-UP IN PREHEATER KILN SYSTEMS 29 6. FUEL CHANGE IMPACTS ON THE FUEL PREPARATION EQUIPMENT 31 6.1. MILLS 31 6.2. FUEL PREPARATION SYSTEM OPTIONS 33 6.2.1. SITUATION 1 33 6.2.2. SITUATION 2 34 6.2.3. SITUATION 3 35 7. SAFETY CONSIDERATIONS 35 8. SUMMARY 36 Page 2 of 2 Fuel Changes In Cement Kiln Systems 1. Abstract Due to the increasing costs of liquid and gaseous fuels, many cement plants burning these fuels are converting to solid fuels such as coal and petroleum coke as their main fuel to reduce operating costs. This paper discusses various topics that are important when considering fuel changes.
    [Show full text]