Ezwriter Magstripe Reader & Writer Workshop Utility & Technical Guide

Total Page:16

File Type:pdf, Size:1020Kb

Ezwriter Magstripe Reader & Writer Workshop Utility & Technical Guide ID TECH EzWriter USER MANUAL EzWriter TM MagStripe Reader & Writer WorkShopTM Utility & Technical Guide For Model Number IDWA UL 80058501-002-K August 8, 2013 Copyright © 2011-2013 International Technologies & Systems Corporation. All Rights Reserved 1 of 66 ID TECH EzWriter FCC WARNING STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user is required to correct the interference at his expense. FCC COMPLIANCE STATEMENT This reader complies with Part 15 of the FCC Rules. Operation of this reader is subject to the following conditions: this reader may not cause harmful interference and this reader must accept any interference received, including interference that may cause undesired operation. CE STANDARDS An independent laboratory performed testing for compliance to CE requirements. The unit under test was found compliant to Class A. Copyright © 2011-2013 International Technologies & Systems Corporation. All Rights Reserved 2 of 66 ID TECH EzWriter LIMITED WARRANTY ID TECH warrants to the original purchaser for a period of 12 months from the date of invoice that this product is in good working order and free from defects in material and workmanship under normal use and service. ID TECH’s obligation under this warranty is limited to, at its option, replacing, repairing, or giving credit for any product which has, within the warranty period, been returned to the factory of origin, transportation charges and insurance prepaid, and which is, after examination, disclosed to ID TECH’s satisfaction to be thus defective. The expense of removal and reinstallation of any item or items of equipment is not included in this warranty. No person, firm, or corporation is authorized to assume for ID TECH any other liabilities in connection with the sales of any product. In no event shall ID TECH be liable for any special, incidental or consequential damages to Purchaser or any third party caused by any defective item of equipment, whether that defect is warranted against or not. Purchaser’s sole and exclusive remedy for defective equipment, which does not conform to the requirements of sales, is to have such equipment replaced or repaired by ID TECH. For limited warranty service during the warranty period, please contact ID TECH to obtain a Return Material Authorization (RMA) number & instructions for returning the product. THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE. THERE ARE NO OTHER WARRANTIES OR GUARANTEES, EXPRESS OR IMPLIED, OTHER THAN THOSE HEREIN STATED. THIS PRODUCT IS SOLD AS IS. IN NO EVENT SHALL ID TECH BE LIABLE FOR CLAIMS BASED UPON BREACH OF EXPRESS OR IMPLIED WARRANTY OF NEGLIGENCE OF ANY OTHER DAMAGES WHETHER DIRECT, IMMEDIATE, FORESEEABLE, CONSEQUENTIAL OR SPECIAL OR FOR ANY EXPENSE INCURRED BY REASON OF THE USE OR MISUSE, SALE OR FABRICATIONS OF PRODUCTS WHICH DO NOT CONFORM TO THE TERMS AND CONDITIONS OF THE CONTRACT. The information contained herein is provided to the user as a convenience. While every effort has been made to ensure accuracy, ID TECH assumes no responsibility, for its use, nor for any infringements or patents or other rights of third parties that may result from its use. ID TECH is not responsible for damages that might occur because of errors or omissions, including any loss of profit or other commercial damage. The specifications described herein were current at the time of publication, but are subject to change at any time without prior notice. ID TECH is a registered trademark of International Technologies & Systems Corporation. EzWriter, WorkShop, and Value through Innovation are trademarks of International Technologies & Systems Corporation. USB (Universal Serial Bus) Specification is Copyright by Compaq Computer Corporation, Intel Corporation, Microsoft Corporation, and NEC Corporation. Windows, Excel, & Notepad are registered trademarks of Microsoft Corporation. Copyright © 2011-2013 International Technologies & Systems Corporation. All Rights Reserved 3 of 66 ID TECH EzWriter Contents Introduction ........................................................................................................................... 6 Quick Start ............................................................................................................................ 7 Installing WorkShop Software ........................................................................................... 7 Installing EzWriter ............................................................................................................. 7 Communication Interface .................................................................................................. 7 Using WorkShop ............................................................................................................. 11 Writing on a Card (Quick Start) ....................................................................................... 13 Reading a Card (Quick Start) .......................................................................................... 16 WorkShop Utility ................................................................................................................. 17 WorkShop Window ......................................................................................................... 18 Message Box .................................................................................................................. 19 Card Type ....................................................................................................................... 19 Setup............................................................................................................................... 20 Write................................................................................................................................ 23 Read ............................................................................................................................... 24 Compare ......................................................................................................................... 24 Erase............................................................................................................................... 24 Sequential Write .............................................................................................................. 25 Read & Writing File Operations ....................................................................................... 26 Read To File ................................................................................................................ 26 Write From File ............................................................................................................ 26 Database Application ...................................................................................................... 27 EzWriter Technical Reference Guide ................................................................................. 32 Introduction ..................................................................................................................... 32 Description ...................................................................................................................... 32 Accessories ..................................................................................................................... 32 Terms & Related documents ........................................................................................... 33 Specifications .................................................................................................................. 34 Interface .......................................................................................................................... 35 RS-232: ....................................................................................................................... 35 USB-RS232: ................................................................................................................ 36 Command & Response Introduction ................................................................................... 37 IDT Command Set .......................................................................................................... 37 AMC Compatible Command Set ..................................................................................... 46 Special AMC Emulation Settings .................................................................................... 61 Maintenance ....................................................................................................................... 63 Appendix A Outline drawings ............................................................................................ 64 Appendix B: Card Formats ................................................................................................. 65 ISO .................................................................................................................................
Recommended publications
  • Introduction: History
    Introduction: "Key to the global village", that is how the Smart Card has been described. Smart Cards will bring big changes to the way people provide and receive information and the way they spend money. They will have a profound impact on retailing and service delivery. A Smart Card is like an "electronic wallet". It is a standard credit card-sized plastic intelligent token within which a microchip has been embedded within its body and which makes it 'smart'. It provides not only memory capacity, but computational capability as well and thus the chip is capable of processing data. It has gold contacts that allow other devices to communicate with it. This chip holds a variety of information, from stored (monetary) value used for retail and vending machines to secure information and applications for higher-end operations such as medical/healthcare records. New information and applications can be added depending on the chip capabilities. Smart Cards can store several hundred times more data than a conventional card with a magnetic stripe and can be programmed to reveal only the relevant information. For example, it could tell a device in a store that there is sufficient balance in an account to pay for a transaction without revealing the balance amount. The marriage between a convenient plastic card and a microprocessor allows information to be stored, accessed and processed either online or offline. Therefore, unlike the read-only plastic card, the processing power of Smart Cards gives them the versatility needed to make payments, to configure your cell phones, TVs and video players and to connect to your computers via telephone, satellite or the Internet anytime, anywhere in the world.
    [Show full text]
  • EMF Implementing EMV at The
    Implementing EMV®at the ATM: Requirements and Recommendations for the U.S. ATM Community Version 2.0 Date: June 2015 Implementing EMV at the ATM: Requirements and Recommendations for the U.S. ATM Community About the EMV Migration Forum The EMV Migration Forum is a cross-industry body focused on supporting the EMV implementation steps required for global and regional payment networks, issuers, processors, merchants, and consumers to help ensure a successful introduction of more secure EMV chip technology in the United States. The focus of the Forum is to address topics that require some level of industry cooperation and/or coordination to migrate successfully to EMV technology in the United States. For more information on the EMV Migration Forum, please visit http://www.emv- connection.com/emv-migration-forum/. EMV is a trademark owned by EMVCo LLC. Copyright ©2015 EMV Migration Forum and Smart Card Alliance. All rights reserved. The EMV Migration Forum has used best efforts to ensure, but cannot guarantee, that the information described in this document is accurate as of the publication date. The EMV Migration Forum disclaims all warranties as to the accuracy, completeness or adequacy of information in this document. Comments or recommendations for edits or additions to this document should be submitted to: ATM- [email protected]. __________________________________________________________________________________ Page 2 Implementing EMV at the ATM: Requirements and Recommendations for the U.S. ATM Community TABLE OF CONTENTS
    [Show full text]
  • Smart Cards Vs Mag Stripe Cards
    Benefits of Smart Cards versus Magnetic Stripe Cards for Healthcare Applications Smart cards have significant benefits versus magnetic stripe (“mag stripe”) cards for healthcare applications. First, smart cards are highly secure and are used worldwide in applications where the security and privacy of information are critical requirements. • Smart cards embedded with microprocessors can encrypt and securely store information, protecting the patient’s personal health information. • Smart cards can allow access to stored information only to authorized users. For example, all or portions of the patient’s personal health information can be protected so that only authorized doctors, hospitals and medical staff can access it. The rules for accessing medical information can be enforced by the smart card, even when used offline. • Smart cards support strong authentication for accessing personal health information. Patients and providers can use smart health ID cards as a second factor when logging in to access information. In addition, smart cards support personal identification numbers and biometrics (e.g., a fingerprint) to further protect access. • Smart cards support digital signatures, which can be used to determine that the card was issued by a valid organization and that the data on the card has not been fraudulently altered since issuance. • Smart cards use secure chip technology and are designed and manufactured with features that help to deter counterfeiting and thwart tampering. • Smart cards can help to reduce healthcare fraud by providing strong identity authentication of patients and providers. The use of secure smart chip technology, encryption and other cryptography measures makes it extremely difficult for unauthorized users to access or use information on a smart card or to create duplicate cards.
    [Show full text]
  • Unlocking the Smart Card
    Episode Four: Unlocking the Smart Card This is an excerpt from Unlocked — an ASSA ABLOY podcast series on campus security. Unlocked explores the security issues and challenges that colleges and universities face as they strive to create a safe and secure learning environment. Visit intelligentopenings.com/unlocked to hear more. How We Got Smart Before diving into the current broken cards and physical wear on the credential technologies, it helps to readers. Prox solved these problems. understand where we came from. Lower maintenance costs, increased In 1960, a young engineer from IBM user convenience, and new options named Forrest Parry invented the for form factors like fobs made the magnetic stripe card. Once prox card a winner. But the low- ubiquitous on campus doors, more frequency proximity technology is reliable and secure technologies not without its limitations. are quickly eclipsing the mag stripe. Mag stripe cards are simple. A card gets swiped in a reader. That reader then reads a sequence of numbers Outside of higher stored on the stripe of that card. education and If the number matches what’s stored in the access system’s older hotels, hardly Whether installing a new door access database, the door unlocks. system for your campus or upgrading from a legacy system you have a lot of Many campuses still use the mag anyone still uses decisions to make. stripe card for their door access. This is mainly because the cards are mag stripe cards You first must choose the right access inexpensive, the cost to replace the software and locking hardware.
    [Show full text]
  • Oral History of Jerome Svigals
    Oral History of Jerome Svigals Interviewed by: Dag Spicer Recorded: June 19, 2007 Mountain View, California CHM Reference number: X4067.2007 © 2007 Computer History Museum Jerome Svigals Oral History Dag Spicer: Okay, it’s June 19, 2007, in Mountain View, California at the Computer History Museum. This is Dag Spicer, senior curator of the museum and we’re here with Jerome Svigals, who’s an IBM veteran and someone who’s done several interesting things related to computing. So Jerome, I want to start with some of the major events related to the history of computing that you were involved with, and then we can go back a little bit if it’s appropriate to the earlier formative experiences in your life, let’s say going to school, or if you were in the services during the war, those kind of things. Jerome Svigals: I think my earliest computing experience was working on ENIAC at Aberdeen Proving Ground. I went there as an assignment at the beginning of the Korean War, and I became one of the first 50 programmers of the ENIAC computer. Spicer: Back up a year or two before you started working on the ENIAC and tell us how you got that job. Svigals: Where I actually got it was through the military. I was in the tail-end of World War II, and I was in Army Ordinance. They’re responsible for weapons and weapon systems. And I signed up as a lieutenant in the Reserve, and then went to college. When I got out of college in early 1950 along came the Korean War, and I got recalled.
    [Show full text]
  • Magnetic Stripe Cards (All You Ever Wanted to Know and Some You Didn't)
    Magnetic Stripe Cards (All you ever wanted to know and some you didn't) written and compiled by John Kay April 1995 (updated April 2000) There is frequently confusion, doubt and even misinformation surrounding the humble magnetic stripe card. The following is a comprehensive guide to technical aspects of magnetic stripe cards, it is my attempt to divulge all the facts (as far as I know them and can uncover them, so please use this information with care). Background Magnetic stripe cards are without the most widely used cards in the world, both in access control and banking and have been around since the 1960's. While other card technologies are forging ahead and gaining wide acceptance the magnetic stripe card, due to the shear number of bank cards, credit cards, loyalty cards and the like is still by far the most widely used card world-wide. There are two types of magnetic material used to form the magnetic stripe of a magnetic stripe card: Standard Credit Cards use 300 Oersted magnetic tape that is generally brown in colour. High Coercivity Cards use 4000 Oersted magnetic tape that is generally black in colour. An Oersted (symbol Oe) is the CGS electro-magnetic unit of field strength. 1Oe = 103/4p Am-1 Standard magnetic tape is available from many sources and is similar to audio or videotape. High Coercivity is generally agreed to be of a value of 4000 Oersted. The 3M company is the major supplier of 4000 Oersted tape. Other manufacturers produce tape of 3500, 3000 and even 2750 Oersted that are all considered High Coercivity (Hi-Co).
    [Show full text]
  • The EMV Chip Card Transition: Background, Status, and Issues for Congress
    The EMV Chip Card Transition: Background, Status, and Issues for Congress Patricia Moloney Figliola Specialist in Internet and Telecommunications Policy May 17, 2016 Congressional Research Service 7-5700 www.crs.gov R43925 The EMV Chip Card Transition: Background, Status, and Issues for Congress Summary Consumer financial card fraud due to data breaches of card information is an ongoing problem in the United States. The majority of breaches are carried out against point-of-sale (POS) systems, and are facilitated by what many consider to be the weak link in the U.S. retail sales payment process: the continued use of magnetic stripe cards (also referred to as stripe-and-signature cards). These cards are still what most U.S. consumers think of when referring to financial cards. In much of the rest of the world, cards that provide a much higher level of security for conducting sales transactions have been used for many years: EMV cards, named for the coalition of card brands Europay, MasterCard, and Visa (the EMV Coalition or EMVCo) that developed the specifications for the system in the 1990s. EMV cards store card information on an embedded microchip and are more commonly called chip cards. With these cards, instead of swiping and signing to make a payment, the cardholder inserts the card into the POS machine, then either enters a personal identification number (PIN) or signs to verify the transaction. On October 1, 2015, the liability for fraudulent transactions involving magnetic stripe cards shifted to the entity—card issuer (e.g., bank, credit union) or merchant—that had not yet made the transition.
    [Show full text]
  • Multipurpose Fare Media: Developments and Issues
    Transit Cooperative Research Program Sponsored by the Federal Transit Administration RESEARCH RESULTS DIGEST June 1997--Number 16 Subject Area: VI Public Transit Responsible Senior Program Officer: Stephen J Andrle Multipurpose Fare Media: Developments and Issues This TCRP digest presents the interim findings of TCRP Project A-14, "Potential of Multipurpose Fare Media," conducted by Multisystems, Inc., in collaboration with Dove Associates, Inc., and Mundle & Associates, Inc. Included in the digest are (1) a summary of the emerging developments, (2)a discussion of key issues and concerns, and (3) a technicalappendix presenting the results of a survey of transit operators fare collection practices and plans. CHAPTER 1--INTRODUCTION These may overlap, and in particular, the latter two approaches are often pursued together. This digest contains examples of multipurpose TCRP Project A-14, Potential of Multipurpose transit fare payment programs and discusses Fare Media, is intended to identify issues and institutional, technological, and financial issues that concerns on the part of transit agencies and financial must be addressed to implement such programs. This institutions, assess customer and financial will be of interest to transit managers, transit implications associated with various approaches, planners, transit financial officers, and other financial monitor emerging developments, and assess the professionals. The desire on the part of both transit potential of increasing the role of the banking agencies and financial institutions to reduce the use industry in transit fare payment and collection. This of cash for payments and improve customer research is intended to provide both transit and convenience has dovetailed with advancements in the financial services professionals (1) an understanding payment technology area to facilitate various types of of the nature of the costs and potential benefits of "multipurpose" media.
    [Show full text]
  • C:\Documents and Settings\Fay\D
    IS O 9 0 0 2 C e r tifie d L e a d w ith te c h n o lo g y W in c u s to m e r s w ith s e r v ic e Magnetic Stripe Reader SERIES 1205 O PERATIO N M ANUAL 1 2 © Jarltech International Inc. 2002. All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Jarltech. Every effort has been made to ensure that the information in this manual is accurate. Jarltech is not responsible for printing or clerical errors. Jarltech International Inc. 3F, No. 1, Lane 538, Chung Cheng Road, Hsin Tien, Taipei, Taiwan, R.O.C. 3 4 This equipment has been tested and found to comply with the limits for Class A digital device. Pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and if not installed and used in accordance with the instructions may cause harmful interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try correct interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
    [Show full text]
  • Smart Card Technology : QC100 .U57 NO.500-157 1988 V19 C.1 NIST- St
    ^ NAFL INST OF STANDARDS & TECH R.I.C. oi Computer Science A1 11 02903092 Ni HaykIn, Martha E/Smart card technology : QC100 .U57 NO.500-157 1988 V19 C.1 NIST- St. and Technology (formerly National Bureau of Standards) NBS NIST Special Publication 500-157 PUBLICATIONS Smart Card Technology: New Methods for Computer Access Control Martha E. Haykin Robert B. J. Warnar i Computer Science and Technology iwi NIST Special Publication 500-157 Smart Card Technology: New Methods for Computer Access Control Martha E. Haykin and Robert B. J. Warnar Security Technology Group Institute for Computer Sciences and Technology National Institute of Standards and Technology Gaithersburg, MD 20899 September 1988 / w % NOTE: As of 23 August 1988, the National Bureau of Standards (NBS) became the National Institute of Standards and Technology (NIST) when President Reagan signed Into law the Omnibus Trade and Competitiveness Act. U.S. DEPARTMENT OF COMMERCE C. William Verity, Secretary National Institute of Standards and Technology (formerly National Bureau of Standards) Ernest Ambler, Director Reports on Computer Science and Technology The National Institute of Standards and Technology has a special responsibility within the Federal Government for computer science and technology activities. The programs of the NIST Institute for Computer Sciences and Technology are designed to provide ADP standards, guidelines, and technical advisory services to improve the effectiveness of computer utilization, and to perform appropriate re- search and development efforts as foundation for such activities and programs. This publication series will report these NIST efforts to the Federal computer community as well as to interested specialists in the governmental, academic, and private sectors.
    [Show full text]
  • Lean Six Sigma Green Belt Virtual Session 1
    IBM Learning ©2014 IBM Corporation 1 MBB Webcast Series Sponsor: MoreSteam.com Select Customers: • Founded in 2000 • Trained 435,000+ Lean Six Sigma professionals • Served over 2,000 corporate customers (including 50+% of the F500) • First firm to offer the complete Black Belt curriculum online • Courses reviewed and approved by ASQ and PMI • Academic Partnerships with Ohio State University, Cal Poly and George Washington University IBM Learning ©2014 IBM Corporation 2 Today’s Program • Welcome • Introduction of MBB Webcast Series − Ellen Milnes, MoreSteam.com • IBM Panelists: − Michael Testani, Don Sobeski, Luca Bencini • Open Discussion and Questions IBM Learning ©2014 IBM Corporation 3 About Our Panelists Michael Testani is a Business Transformation and Learning Consultant for IBM's Corporate Learning organization. He is the Program Manager for IBM's Global Process Excellence learning initiatives and the Course Manager of their Lean Six Sigma Black Belt worldwide learning offering. Don Sobeski is a Business Transformation and Learning Consultant for IBM's Corporate Learning organization. He is the Course Manager for IBM's Lean Six Sigma Green Belt worldwide learning offering. Luca Bencini recently retired from IBM where he was a Senior Managing Consultant and is currently delivering IBM's virtual Black Belt course. IBM Learning ©2014 IBM Corporation 4 Presentation Outline Background on IBM LSS history within IBM LSS course structure and evolution Training philosophy, principles and practices Current course structure: a Global Blended Learning approach Adaptation of the MoreSteam Sigma Brew case study in a virtual environment Blended Learning Benefits & Lessons Learned IBM Learning ©2014 IBM Corporation 5 IBM Background International Business Machines “More than a century of making the world a smarter place” An American multinational technology and consulting corporation, with headquarters in Armonk, New York, United States.
    [Show full text]
  • USB Card Reader Configuration Guide
    USB Card Reader Configuration Guide Xerox WorkCentre® 51xx / Xerox WorkCentre 56xx Xerox WorkCentre 57xx / Xerox WorkCentre 6400 Xerox WorkCentre 75xx / Xerox WorkCentre 77xx Xerox ColorQube® 87xx / 89xx Xerox ColorQube 92xx / Xerox ColorQube 93xx February 2014 ©2014 Xerox Corporation. All rights reserved. Xerox® and Xerox and Design®, WorkCentre®, ColorQube®, and Xerox Extensible Interface Platform® are trademarks of the Xerox Corporation in the United States and/or other countries. Other company trademarks are also acknowledged. Document Version: 3.0 (February 2014). dc13cd023 Table of Contents Overview ......................................................................................................... 2 Supported Reader Technology ....................................................................... 2 Operation ........................................................................................................ 2 Diagnostics ..................................................................................................... 3 Card Reader Software .................................................................................... 3 Magnetic Stripe Reader Constraints ............................................................... 3 Prerequisites ................................................................................................... 4 Installation ...................................................................................................... 4 Connecting the USB card reader .......................................................
    [Show full text]