DOCSLIB.ORG

Eastern New York Asm

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Eastern New York Asm EASTERN NEW YORK ASM March 2010 March ASM Event 1 ASM Eastern New York Chapter Special Event: Private viewing of the Troy Bell Exposition and tour of the Burden Iron Works Museum Saturday, March 6, 2010 at 3:00 p.m. Followed by a social hour and dinner at Brown’s Brewing Company (formerly Troy Pub and Brewery), about 5:00 p.m. Please RSVP to Jennifer Kruk at (518) 395-4401 or [email protected] by Tuesday, March 2nd so we know roughly how many people to expect. Burden Iron Works Museum 1 E. Industrial Parkway (at the Foot of Polk Street) Troy, NY 12180 http://www.mcwb-arch.com/projects/cultural/burden.html Newsletter 1 “At one time the Troy and Watervliet area was the bell capital of the Western Hemisphere, if not the world. Four bell foundries produced more than one hundred thousand bells for churches, city-halls, firehouses, and ships all over the world. Antarctica is the only continent that does not have a Troy bell”. The preceding text is from Jack Westbrook’s book, Material Memories of the Mohawk-Hudson Region. ASM members, friends, and families are invited to the Burden Iron Works museum for a private viewing of a display of Troy bells, and to see the excellent progress that Dr. P. Thomas Carroll and the other Hudson Mohawk Industrial Gateway folks have made with restoration of the historical headquarters of the Burden Iron Works. The building was built in 1881-1882 and now has a new roof, new cupola, completely rebuilt skylight, new parking lot and sidewalks, ADA compliance (ramp and bathroom), restored bronze lettering over the entrance, and more. The event is free for all attendees, but each individual will have to pick up his or her own beer and food tab at Brown’s Brewing Company after the tour. We need to hold the event during daylight hours due to limited lighting in the facility, which is the reason for meeting Saturday afternoon. More about the exposition: There are several display cases with items relating to the arrival of the Hanks family, who came from Connecticut in 1808, setting up shop initially in what is now Watervliet. They then moved over to Troy in 1825. They eventually evolved into W. & L.E. Gurley, the surveying instrument company, but before they did, they took on Andrew Meneely, a local kid, as an apprentice. He worked out very well, making surveying instruments that are highly respected and prized among collectors, and marrying a Hanks woman. The two of them stayed over across the river when the rest of the family moved to Troy, and over time, Andrew and his sons evolved away from surveying instruments and toward bells, eventually making bells exclusively. Three different bell foundries grew out of that Meneely start. And the rest is history. The Gurley surveying instruments became world famous, and the Meneely- related bell foundries cranked out about a hundred thousand bells, including the replacement for the Liberty Bell that today hangs in the bell tower of Independence Hall in Philadelphia. The exhibit is being curated by Bill Skerritt, the Hudson Mohawk Industrial Gateway Board President, who is the world’s authority on everything even remotely connected to the history of Gurley surveying instruments. Newsletter 2 March ASM Event 2 March ASM Meeting Tuesday, March 23, 2010 Alfred Geisler Award Night Presentation by 2009 Award Winner Edward Richey Glen Sander's Mansion 5:30 pm Cocktails, 6:30 pm Dinner SCC Initiation Testing of Nickel-Based Alloys in High Temperature Water Stress corrosion cracking (SCC) initiation tests have been conducted on Alloy 600 and Alloy 600 weld metal EN82H at temperatures from 315 to 360°C. Tests were conducted with in-situ monitored smooth tensile specimens under a constant load in hydrogenated and aerated environments. All tests were instrumented with reversing direct current electric potential drop (EPD) to detect SCC initiation. Tests were conducted to examine the effects of heat treatment, stress (and strain), coolant hydrogen, and temperature on SCC initiation time. The thermal activation energy of SCC initiation was measured as 139.69 ± 24.58 kJ/mol in hydrogenated water, which is very similar to the thermal activation energy for SCC growth. SCC initiation was shown to have a similar coolant hydrogen dependency as SCC crack growth; the initiation time is minimized near the Ni/NiO phase transition. Preliminary results suggest that the fundamental mechanical parameter which controls SCC initiation is plastic strain not stress. Limited testing suggests that a strong load-path SCC initiation dependency does not occur in deaerated water, although load-path effects have been observed previously in aerated water. Test results also indicated that under similar loading and environmental conditions, the SCC initiation time (for a smooth) service is significantly greater for EN82H than wrought Alloy 600. Reservations: Contact Jennifer Kruk at (518) 395-4401 or [email protected] by Wednesday, March 17th Please indicate your dinner entree choice: Chicken Milanese- breaded chicken cutlet, fresh tomatoes, arugula, balsamic glaze, lemon scented risotto, sugar snap peas OR Sliced New York Sirloin- whole roasted with garlic mashed potatoes and sugar snap peas OR Vegetarian entree available upon request. OR Stuffed Swordfish imperial crab stuffing, saffron scented stir fried rice, charred asparagus, lobster sherry cream Cost per person: Members- $20.00; Retirees- $15.00; Students- $10.00 Newsletter 3 2010 ASM Spring Symposium News GE Global Research will host the 2009 ASM/TMS Annual Symposium on May 18 h and 19 h in the Steinmetz Hall. This year's topic is Characterization and Testing . An exciting program with invited speakers from industry, universities, and national laboratories from across the country will offer presentations in the following areas: - Characterization Methods from nano to macro - 3D Characterization and Modeling - Environmental Degradation - Fabrication Effects on Materials Performance The symposium will include a symposium banquet at the Glen Sanders Mansion on May 18 th . The cost of the symposium is $270, or $50 for students and retirees; Dinner fees are Prof: $20; Ret: $15; Stu: $10 - ALL PREPAY For additional information, contact Laurent Cretegny (518-387-5730) Young Members: TBD (RPI) ASM OFFICERS Chapter Counsel Representative: Mike Hanson (KAPL) – Chairman Maria Winnicka (Global Tungsten) Raul B Rebak (GEGR – Vice Chairman Chairman at-large: Hongbo Cao (GEGR) – Secretary Jack Westbrook (Brookline Technologies) Chris Klapper(GEGR) - Treasurer Calendar of Events ASM COMMITTEE Programming: Jennifer Kruk (KAPL) December: Partners Night Website Andy Detor (GEGR) February: Joint ASM-AWS Meeting Awards: Dana Levene (KAPL) March: Awards Night Membership: Steve Buresh (GEGR) April: Manufacturing Tour Education: PR Subramanian (GEGR) Public Relations: David Ferrill (KAPL) Student Affairs: Dan Lewis (RPI) This newsletter can also be found at the New Website: Http://easternny.asminternational.org Newsletter 4 Eastern NY ASM Chapter 2009 Academic Scholarships The Eastern New York Chapter of ASM International offers undergraduate and graduate Scholarship Awards of $500 each. Applications (on the following pages) are being accepted for the 2009 Eastern New York ASM Chapter Scholarship Awards through Feb 1st, 2009 ASM or Joint ASM/TMS Student Membership is required for consideration. Application forms must be postmarked by March 1st and mailed to: Dana Levene Knolls Atomic Power Laboratory P.O. Box 1072, Bin 56 Schenectady, NY 12301 Tel: (518) 395-7070 This newsletter and other chapter information can also be found on the ASM Chapter website: Http://easternny.asminternational.org Please send any newsletter announcements or suggestions to Hongbo Cao at [email protected] Newsletter 5 ASM INTERNATIONAL FOUNDATION SCHOLARSHIP APPLICATION Part 1: Fill out completely. Please TYPE or PRINT clearly in BLACK INK. All materials must be submitted in English. 1. Miss Mrs. Ms. Mr. Full Name: ________________________________________________________________________________ 2. Indicate preferred address for contact and mailing: Address:______________________________________________________________________________________ Address:______________________________________________________________________________________ City/State:_____________________________________________________________________________________ Country/Zip Code:_______________________________________________________________________________ Telephone:_____________________________________________________________________________________ E-mail:________________________________________________________________________________________ 3. ASM Membership: ASM or Joint ASM/TMS Student Member Number: ___________ Join Date (Mo/Yr): __________________________ (ASM student membership is required for scholarship consideration) 4. Country of Citizenship: ________________________________________________________________________ 5. College or University: _________________________________________________________________________ 6. Major/Concentration (including option if applicable): ________________________________________________ 7. Employment Experience (résumé may be attached): _________________________________________________ 8. Attach a personal essay describing interest in metallurgy/materials, career plans, long-range aspirations, special achievements and honors, employment experience, interdisciplinary skill/interest, and social values (maximum of two typewritten pages). 9. Attach no more than two
Load more

Recommended publications
  • Carillon News No. 80
    No. 80 NovemberCarillon 2008 News www.gcna.org Newsletter of the Guild of Carillonneurs in North America Berkeley Opens Golden Arms to Features 2008 GCNA Congress GCNA Congress by Sue Bergren and Jenny King at Berkeley . 1 he University of California at TBerkeley, well known for its New Carillonneur distinguished faculty and academic Members . 4 programs, hosted the GCNA’s 66th Congress from June 10 through WCF Congress in June 13. As in 1988 and 1998, the 2008 Congress was held jointly Groningen . .. 5 with the Berkeley Carillon Festival, an event held every five years to Search for Improving honor the Class of 1928. Hosted by Carillons: Key Fall University Carillonist Jeff Davis, vs. Clapper Stroke . 7 the congress focused on the North American carillon and its music. The Class of 1928 Carillon Belgium, began as a chime of 12 Taylor bells. Summer 2008 . 8 In 1978, the original chime was enlarged to a 48-bell carillon by a Plus gift of 36 Paccard bells from the Class of 1928. In 1982, Evelyn and Jerry Chambers provided an additional gift to enlarge the instrument to a grand carillon of Calendar . 3 61 bells. The University of California at Berkeley, with Sather Tower and The Class of 1928 Installations, Carillon, provided a magnificent setting and instrument for the GCNA congress and Renovations, Berkeley festival. More than 100 participants gathered for artist and advancement recitals, Dedications . 11 general business meetings and scholarly presentations, opportunities to review and pur- chase music, and lots of food, drink, and camaraderie. Many participants were able to walk Overtones from their hotels to the campus, stopping on the way for a favorite cup of coffee.
    [Show full text]
  • The Liberty Bell: a Symbol for “We the People” Teacher Guide with Lesson Plans
    Independence National Historical National Park Service ParkPennsylvania U.S. Department of the Interior The Liberty Bell: A Symbol for “We the People” Teacher Guide with Lesson Plans Grades K – 12 A curriculum-based education program created by the Independence Park Institute at Independence National Historical Park www.independenceparkinstitute.com 1 The Liberty Bell: A Symbol for “We the People” This education program was made possible through a partnership between Independence National Historical Park and Eastern National, and through the generous support of the William Penn Foundation. Contributors Sandy Avender, Our Lady of Lords, 5th-8th grade Kathleen Bowski, St. Michael Archangel, 4th grade Kate Bradbury, Rydal (East) Elementary, 3rd grade Amy Cohen, J.R. Masterman, 7th & 10th grade Kim General, Toms River High School North, 9th-12th grade Joyce Huff, Enfield Elementary School, K-1st grade and Library Coach Barbara Jakubowski, Strawbridge School, PreK-3rd grade Joyce Maher, Bellmawr Park, 4th grade Leslie Matthews, Overbrook Education Center, 3rd grade Jennifer Migliaccio, Edison School, 5th grade JoAnne Osborn, St. Christopher, 1st-3rd grade Elaine Phipps, Linden Elementary School, 4th-6th grade Monica Quinlan-Dulude, West Deptford Middle School, 8th grade Jacqueline Schneck, General Washington Headquarts at Moland House, K-12th grade Donna Scott-Brown, Chester High School, 9th-12th grade Sandra Williams, George Brower PS 289, 1st-5th grade Judith Wrightson, St. Christopher, 3rd grade Editors Jill Beccaris-Pescatore, Green Woods
    [Show full text]
  • A Replica of the Stretch Clock Recently Reinstated at the West End of Independence Hall
    A replica of the Stretch clock recently reinstated at the west end of Independence Hall. (Photograph taken by the author in summer of 197J.) THE Pennsylvania Magazine OF HISTORY AND BIOGRAPHY The Stretch Qlock and its "Bell at the State House URING the spring of 1973, workmen completed the construc- tion of a replica of a large clock dial and masonry clock D case at the west end of Independence Hall in Philadelphia, the original of which had been installed there in 1753 by a local clockmaker, Thomas Stretch. That equipment, which resembled a giant grandfather's clock, had been removed in about 1830, with no other subsequent effort having been made to reconstruct it. It therefore seems an opportune time to assemble the scattered in- formation regarding the history of that clock and its bell and to present their stories. The acquisition of the original clock and bell by the Pennsylvania colonial Assembly is closely related to the acquisition of the Liberty Bell. Because of this, most historians have tended to focus their writings on that more famous bell, and to pay but little attention to the hard-working, more durable, and equally large clock bell. They have also had a tendency either to claim or imply that the Liberty Bell and the clock bell had been procured in connection with a plan to celebrate the fiftieth anniversary, or "Jubilee Year," of the granting of the Charter of Privileges to the colony by William Penn. But, with one exception, nothing has been found among the surviving records which would support such a contention.
    [Show full text]
  • About the Carillon
    ABOUT THE CARILLON The carillon at Concordia Seminary is one of only 170 such instruments in North America. The 49 bells have been played atop Luther Tower since 1971, and are dedicated to all pastors who have served The Lutheran Church—Missouri Synod (LCMS). It is housed in Luther Tower, the 120- foot structure designed by architect Charles Klauder and dedicated in 1966. CONCORDIA SEMINARY, ST. LOUIS CARILLON CONCERT JUNE 26, 2018 7 P.M. KAREL KELDERMANS CARILLONNEUR Concordia Seminary 801 Seminary Place St. Louis, MO 63105 www.csl.edu 314-505-7000 PROGRAM BIOGRAPHY 1. Fugue Matthias van den Gheyn (1721-85) KAREL KELDERMANS is one of the pre-eminent carillonneurs in North arr. Karel Keldermans America. He has been the carillonneur for Concordia Seminary, St. Louis since 2000. He retired in 2012 from the position of full-time carillonneur 2. Leyenda Isaac Albéniz (1860-1909) for the Springfield Park District in Springfield, Ill., where he also served as arr. Bert Gerken the director of the renowned International Carillon Festival for 36 years. 3. Suite Archaique Geo Clement (1902-69) He has given carillon concerts around the world for the past 40 years. He has released six solo carillon CDs and one of carillon and guitar duets Rigaudon, Pavane, Menuet with Belgian guitarist Wim Brioen. 4. Allegro Reijnold Popma van Oevering (1692-1781) For 12 years, along with his wife, Linda, he was co-owner of American arr. Karel Keldermans Carillon Music Editions, the largest publisher of new music for the carillon in the world. He was president of the Guild of Carillonneurs in North 5.
    [Show full text]
  • SAVED by the BELL ! the RESURRECTION of the WHITECHAPEL BELL FOUNDRY a Proposal by Factum Foundation & the United Kingdom Historic Building Preservation Trust
    SAVED BY THE BELL ! THE RESURRECTION OF THE WHITECHAPEL BELL FOUNDRY a proposal by Factum Foundation & The United Kingdom Historic Building Preservation Trust Prepared by Skene Catling de la Peña June 2018 Robeson House, 10a Newton Road, London W2 5LS Plaques on the wall above the old blacksmith’s shop, honouring the lives of foundry workers over the centuries. Their bells still ring out through London. A final board now reads, “Whitechapel Bell Foundry, 1570-2017”. Memorial plaques in the Bell Foundry workshop honouring former workers. Cover: Whitechapel Bell Foundry Courtyard, 2016. Photograph by John Claridge. Back Cover: Chains in the Whitechapel Bell Foundry, 2016. Photograph by John Claridge. CONTENTS Overview – Executive Summary 5 Introduction 7 1 A Brief History of the Bell Foundry in Whitechapel 9 2 The Whitechapel Bell Foundry – Summary of the Situation 11 3 The Partners: UKHBPT and Factum Foundation 12 3 . 1 The United Kingdom Historic Building Preservation Trust (UKHBPT) 12 3 . 2 Factum Foundation 13 4 A 21st Century Bell Foundry 15 4 .1 Scanning and Input Methods 19 4 . 2 Output Methods 19 4 . 3 Statements by Participating Foundrymen 21 4 . 3 . 1 Nigel Taylor of WBF – The Future of the Whitechapel Bell Foundry 21 4 . 3 . 2 . Andrew Lacey – Centre for the Study of Historical Casting Techniques 23 4 . 4 Digital Restoration 25 4 . 5 Archive for Campanology 25 4 . 6 Projects for the Whitechapel Bell Foundry 27 5 Architectural Approach 28 5 .1 Architectural Approach to the Resurrection of the Bell Foundry in Whitechapel – Introduction 28 5 . 2 Architects – Practice Profiles: 29 Skene Catling de la Peña 29 Purcell Architects 30 5 .
    [Show full text]
  • Bells – General
    5. BELLS - GENERAL Acc. Author Title Date Publisher and other details No. 541 Adams, Alice Thérèse Church Bells 1930 Catholic Truth Society of Ireland, Dublin 28pp 2419 Appleby, Robert Time for a change? Ring Church Bells for Fun and Friendship 1997 Treetop Books , Bradford 27pp ISBN 1-898476-01-2 1863 Anon Baptism of Bells, The 1855 The Bulwark 2pp Extracted from the issue of 1 Oct. 1855, pp106-7 (25) 1863 Anon German Campanology. English translation from Organ für Christliche Kunst 1867 The Ecclesiologist 6pp Pages 363-368 (27) 92 Anon Church Bells: their Uses, their Romance and their History 1903 Sir W C Leng and Co Ltd, Sheffield 51pp Reprinted from the Sheffield Telegraph 1776 Anon Bells, The 1976, Jul The Seal 9pp Offprint of article in the house journal of the Walsall Lithographic Co Ltd Also photocopy of same 1868 Anon A History of Bells, and description of their manufacture, as practised at the n.d. (post Cassell, Petter and Galpin, London 24pp, illustrated Reprinted from Bell Foundry, Whitechapel 1865) Cassell’s Magazine of Art (1854) Revised up to the present date 805 B B C Radio for Schools Discovery 1973, Aut Pupil’s Pamphlet 36pp 806 B B C Radio for Schools Ring Out Wild Bells 1973, Aut Teacher’s Notes for ‘Discovery’ Autumn 1973 (Illustrated script of Broadcast) 18pp 87 Beamont, W A Chapter on Bells and Inscriptions upon some of them 1888 Percival Pearse, Warrington 43pp 3076 Beckett, Sir Edmund Bart. A rudimentary treatise on clocks and watches and bells 1883 Crosby, Lockwood & Co, London 7th edition xiii + 400pp (Lord Grimthorpe) See also under Denison and Grimthorpe for other editions 1863 Berkeley, Revd Sackville H Church Bells: their true worth and true influence.
    [Show full text]
  • Campaign Fact Book Former Whitechapel Bell Foundry Site Whitechapel, London
    Campaign Fact Book Former Whitechapel Bell Foundry Site Whitechapel, London Compiled January 2020 Whitechapel Bell Foundry: a matter of national importance This fact book has been compiled to capture the breadth of the campaign to save the site of the Whitechapel Bell Foundry, which is currently threatened by a proposal for conversion into a boutique hotel. Re-Form Heritage; Factum Foundation; numerous community, heritage and bellringing organisations; and thousands of individuals have contributed to and driven this campaign, which is working to: reinstate modern and sustainable foundry activity on the site preserve and record heritage skills integrate new technologies with traditional foundry techniques maintain and build pride in Whitechapel’s bell founding heritage The site of the Whitechapel Bell Foundry is Britain’s oldest single-purpose industrial building where for generations bells such as Big Ben, the Liberty Bell, Bow Bells and many of the world’s great bells were made. Bells made in Whitechapel have become the voices of nations, marking the world’s celebrations and sorrows and representing principles of emancipation, freedom of expression and justice. As such these buildings and the uses that have for centuries gone on within them represent some of the most important intangible cultural heritage and are therefore of international significance. Once the use of the site as a foundry has gone it has gone forever. The potential impact of this loss has led to considerable concern and opposition being expressed on an unprecedented scale within the local area, nationally and, indeed, internationally. People from across the local community, London and the world have voiced their strong opposition to the developer’s plans and to the hotel use and wish for the foundry use to be retained.
    [Show full text]
  • Campanologist Chronicles
    CAMPANOLOGIST CHRONICLES This a tremendous history of the bells in St Andrew’s Parish Church. The oldest dates from the time of Queen Elizabeth, in 1595 for bells 5 and 6, 1654 for the 4th, 1738 for the 3rd and 7th and 1759 for the 10¾cwt tenor. In all the bells weigh 43cwt, just over 2 tons. Following the village’s centuries old tradition of ringing church bells, the current band of ringers has been making steady progress. Unfortunately, over the years the bells have become increasingly difficult to ring, which makes teaching new recruits difficult and produces poor quality ringing. As with all mechanical devices, bells require periodic maintenance, and it is usual for bells and their fittings to require major attention every 50 years or so. The last major work to St Andrew’s bells was carried out seventy years ago in 1947, so now is the time for the current generation to take action, so that the bells can be enjoyed by future generations. Recent inspections from three bell hanging firms have highlighted the poor installation and condition of the fittings, most of which date from the 19th century and appear not to have been renewed back in 1947, during the period of austerity after the war when funds would have been scarce. At that time the eight-bell frame was installed and the two treble bells, as part of a war memorial. Significantly this was the last timber frame to be supplied by the Whitechapel Bell Foundry. Sadly, the foundry, the oldest in the world and Britain's oldest manufacturing company, which made Big Ben and Liberty Bell, closed earlier this year.
    [Show full text]
  • The Liberty Bell by Katie Clark
    Name : The Liberty Bell by Katie Clark Have you heard of the Liberty Bell? It stands for freedom. It was used by America’s founders. The bell was made over 200 years ago. It was made from metals like tin and copper. It was made by the Whitechapel Bell Foundry in London. The bell cracked the !rst time it was rung. It has cracked many times since then. The bell is no longer rung. This is to protect it. The last time it was rung was in 1846. That was in honor of George Washington’s birthday. The bell is very big. It weighs over one ton, or two thousand pounds. It is three feet tall. Over one million people visit the bell each year. It is at a place called Liberty Bell Hall. It still hangs from its very !rst yoke. A yoke is the wood that holds the bell. A picture of the bell has been printed on coins and postage stamps. It is very special to see this piece of history. Printable Worksheets @ www.mathworksheets4kids.com Name : The Liberty Bell 1) The bell is made from metals like...... a) gold and silver b) bronze and silver c) silver and copper d) tin and copper 2) What does the liberty bell stand for? 3) The bell was manufactured by the . 4) Where can you !nd the picture of the bell? 5) Describe the bell. Printable Worksheets @ www.mathworksheets4kids.com Name : Answer key The Liberty Bell 1) The bell is made from metals like...... a) gold and silver b) bronze and silver c) silver and copper d) tin and copper 2) What does the liberty bell stand for? The Liberty Bell is a symbol of American independence.
    [Show full text]
  • Help Us to Preserve This Unique Story and to Keep Sharing These American Ideals
    Dear Friend, The ever-inspiring story of the Liberty Bell’s historic journey to Allentown tells of the bravery that led courageous patriots to save what is now a symbol of our democracy. This story captures the imagination and reminds all who walk into our museum of our hard-won freedoms. The Liberty Bell Museum offers an innovative educational program for elementary school students that links history, language arts, science and technology. We welcome families to a revitalized downtown Allentown through inspiring and enlightening community events. We promote the American ideals of freedom, liberty, civic responsibility and citizenship. We know that you feel the same passion to preserve our history and the symbols of freedom for future generations. Your thoughtful support and generous contribution help us share our unique history as well as provide new exhibits and programs. Up close and personal Our current exhibit is especially timely, created in consultation with local with history. historian Frank Whelan: “Last One In: American Ideals in Conflict with American Attitudes.” His lecture on March 15 explored some of the history of and the reactions to German, Jewish, Syrian and Hispanic people who immigrated to the Lehigh Valley. We also are featuring local artists like Amy Dorwang in the Trexler exhibit area, participating in the Hamilton District’s “Third Thursday” celebrations in downtown Allentown. And of special note for the next Pip the Mouse season, our holiday exhibit will be in memory of Dr. George Creegan, “the man behind the mouse.” Please support the Liberty Bell Museum and its programs with a generous donation! You also can order your tickets for our annual band concert on the enclosed form.
    [Show full text]
  • The Liberty Bell Most Likely Did Not Ring out in Celebration of Independence Day on July 4, 1776?
    Did you know that the Liberty Bell most likely did not ring out in celebration of Independence Day on July 4, 1776? The Liberty Bell has a beloved place in the history of the United States of America. While much of what we know about the Liberty Bell is fact, some of what we were taught may not have been so true. First, about the JULY 4 BELL-RINGING - The Second Continental Congress approved the Resolution for Independence on July 2, 1776. This resolution declared the colonies independent from the British Empire. This news was published that evening in the Pennsylvania Evening Post, and again the next day in the Pennsylvania Gazette. After a few alterations, the final text that formally (officially) announced this action was called the United States Declaration of Independence. It was approved on July 4 and sent off to be printed. The text of the Declaration of Independence was read aloud to the public by Colonel John Nixon on July 8, after being returned from the printer. It was on July 8 that all the bells in the city were rung in celebration of independence. Then there’s the bell tower. The actual tower of the Philadelphia City Hall, now known as Independence Hall, was in rough shape at the time all this declaring was happening. Historians believe it unlikely that the tower would have supported the 2080 pound weight of the bell. So, in short, if it could have been rung, the Liberty Bell would certainly have been rung on July 8, 1776, along with all the other bells, but no one knows for certain that it was.
    [Show full text]
  • The Bell in the Christian Church Is a Very Long and Interesting One
    HISTORY OF PRECIOUS BLOOD CATHEDRAL The Sound of a Beautiful Bell Can Be Heard From the Sault “For Bells are the Voice of the Church” Henry Wadsworth Longfellow The history of the bell in the Christian church is a very long and interesting one. Ancient legend has it that Moses brought its use to the Israelites as a result of his years spent learning the mystical rites of the Egyptian culture. Whether true or not, the bell or gong has been an essential element in most ancient religious practices and cultures throughout the world. Over time, man learned to use the sound of bells to communicate over great distances, and following the fall of the Roman Empire, their importance and use spread steadily throughout Christendom. Romanesque and medieval architecture developed to incorporate magnificent bell towers housing massive, beautifully designed and decorated bells. Almost all church bells were ‘named’ or dedicated in honor of Christ, The Blessed Virgin or a particular element of faith such as The Incarnation. Some were assigned to a particular saint, or to a patron responsible for the bells creation. Many were inscribed with instructional verses such as found in Longfellow’s ‘The Golden Legend’: “I praise the true God, I call the people, I assemble the clergy, I bewail the dead, I dispense storm clouds, I do honor to feasts, I hustle the sluggards, I ring in the Sabbaths.” “Bells make a daily statement that the church is alive and well in the community” The most imposing element of the Church of the Sacred Heart, its bell tower, stood empty for twenty eight years.
    [Show full text]