Smart Automotive Lighting for Vehicle Safety

Total Page:16

File Type:pdf, Size:1020Kb

Smart Automotive Lighting for Vehicle Safety TSAI_LAYOUT_Layout 12/3/13 1:49 PM Page 50 VISIBLE LIGHT COMMUNICATIONS: THE ROAD TO STANDARDIZATION AND COMMERCIALIZATION Smart Automotive Lighting for Vehicle Safety Shun-Hsiang Yu, Oliver Shih, and Hsin-Mu Tsai, Intel-NTU Connected Context Computing Center and National Taiwan University Nawaporn Wisitpongphan, King Mongkut’s University of Technology North Bangkok Richard D. Roberts, Intel Labs ABSTRACT current status such as positions and speed, but also what they observe of neighboring objects at It is believed that vehicle-to-vehicle (V2V) different locations. The advantages of the new communications and accurate positioning with paradigm include: sub-meter error could bring vehicle safety to a •Wireless communications and networks can different level. However, to this date it is still penetrate or route around (i.e., utilizing unclear whether the envisioned V2V standard, multihop communications) obstacles block- dedicated short-range communications, can ing line-of-sight (LOS), effectively extend- become available in commercially available vehi- ing the sensor coverage to include all of cle products, while widely available consumer- those neighboring vehicles. grade GPS receivers do not provide the required •Cooperation among vehicles can reduce accuracy for many safety applications. In this uncertainty of measurements [1], such as article, combining visible light communications the position and the speed of a certain vehi- and visible light positioning, we propose the use cle, in multiple ways: of smart automotive lighting in vehicle safety –Self-information of a vehicle is more accu- systems. These lights would be able to provide rate than observations from neighboring the functions of illumination and signaling, reli- vehicles. able communications, and accurate positioning –Observations from a nearby vehicle are in a single solution. The proposed solution has more accurate than observations from a dis- low complexity, and is shown to be scalable in tant vehicle.1 high vehicle density and fast topology changing –Combining observations of the same object scenarios. In this article, we also present several from multiple vehicles can reduce the noise design guidelines for such a system, based on the in the measurements. results of our analytic and empirical studies. •The system can have lower cost as a direct Finally, evaluation of our prototype provides evi- result of the lower required number of sen- dence that the system can indeed detect poten- sors in each vehicle — information does not tial risks in advance and provide early warnings have to be only from on-board sensors, but to the driver in real-world scenarios, lowering also from sensors in neighboring vehicles. the probability of traffic accidents. THE COOPERATIVE PARADIGM REQUIRES INTRODUCTION RELIABLE V2V COMMUNICATIONS The conventional paradigm for vehicle safety has Dedicated short-range communications (DSRC) been an “independent” approach — to incorpo- is often considered the most promising V2V rate a large number of sensors in each vehicle so technology [2]. The technology incorporates a that sufficient coverage can be provided to iden- set of physical, data link, and higher layer stan- tify neighboring objects that could cause acci- dards that use the 5.9 GHz radio spectrum to dents. The main downside of such an approach enable V2V and vehicle-to-infrastructure (V2I) is the high cost of the system as a result of the communications. Although the standards in large number of sensors. Recent advances of DSRC have been drafted or ratified for more communication and networking technologies than a few years, to this date there is still no have enabled a new cooperative paradigm for commercial adoption of the technology. The 1 For example, when esti- vehicle safety systems, in which, via direct vehi- future of DSRC is not clear as of today. For mating the distance to a cle-to-vehicle (V2V) communication links, vehi- example, the U.S. government will make a deci- vehicle using a camera. cles not only share information about their sion regarding the technology at the end of 2013, 50 0163-6804/13/$25.00 © 2013 IEEE IEEE Communications Magazine • December 2013 TSAI_LAYOUT_Layout 12/3/13 1:49 PM Page 51 based on real-world tests carried out in the past The unique properties of optical propagation two years [3]. and VLC present many advantages over conven- The implication of The main reason that V2V technology has tional radio frequency (RF) communications for the 10 percent not yet seen its adoption is that there is very low safety applications: incentive for early adopters to purchase a new Low complexity and low cost: The design of minimum market vehicle with the technology. Many envisioned the VLC transmitter and receiver is much less penetration is that, applications that use multihop communications complex than a comparable RF transceiver, due require a minimum market penetration rate of to a much less severe multipath effect. Com- even if every new 10 percent or more [4]. bined with simple modulation schemes and the vehicle were The implication of the 10 percent minimum fact that the main transmitting component, equipped with the market penetration is that even if every new LED, already exists in vehicles, this minimizes vehicle were equipped with a new V2V radio the additional cost to realize smart automotive new V2V radio start- starting from today, it will still take more than lighting. ing from today, it two years before these applications can be func- Scalability: In scenarios with high vehicle tional on the road.2 As a result, early adopters density, conventional V2V communications will still take more do not gain any benefit in purchasing a V2V- using RF typically experience longer delay and than two years equipped vehicle, which has a higher price tag. lower packet reception rate due to the large before these applica- To jumpstart the initial market penetration rate, number of nodes that participate in channel con- we believe the key directions include: tention. An adaptive transmission power scheme tions can be func- •To discover applications that can immedi- can be used to mitigate the problem, but requires tional on the road. ately provide benefits to the driver on the high overhead to accurately estimate the number day they obtain the new vehicle of nodes in the neighborhood, which could also •To lower the complexity of the technology reduce the reliability. On the other hand, in the so that the added cost to the vehicle prod- case of VLC, only a small number of nodes with- uct is minimized, and we do not rely on a in direct LOS of the receiver are in the same large sale quantity to bring down the costs contention domain, and those nodes are of the The latter implies that the communications tech- most importance since they are the vehicles most nology should be designed to fulfill the require- likely to collide with the receiving vehicles. This ments of only a small set of key applications. filtering mechanism depends on the optical Visible light communications (VLC) utilize propagation property, does not require any over- modulated optical radiation in the visible light head, and hence is highly scalable. spectrum to carry digital information in free Positioning capability: Due to the high direc- space. A VLC system usually uses an LED as tivity of visible light propagation, it is possible to the transmitting component and a photodiode as perform accurate relative positioning between the receiving component. Over the past five vehicles [8]. Compared to a typical positioning years, LED has become very common in auto- error of up to 10 m with GPS [9], the positioning motive lighting due to its long service life, high error of visible light positioning (VLP) is on the resistance to vibration, and better safety perfor- order of only tens of centimeters, much more suit- mance due to its short rise time. Today, LEDs able for vehicle safety applications. can be found in center high mount stop lamps Security: For a malicious attacker to send fal- (third brake lights), brake lights, turn signals, sified information or jam a VLC receiver, due to and headlamps in many commercial vehicles. As the closer operation range and the LOS-only a result, VLC becomes a new and attractive propagation property of VLC, the attacker has solution to realize V2V communications [5–7] in to be in visual range of the victim vehicle for an a completely different way. extended period of time, which renders the In this article, we propose the use of VLC in action less likely compared to when using con- vehicles for several key safety applications, creat- ventional RF communications. In addition, the ing smart automotive lighting that combines the positioning capability can be used to provide an functions of illumination and signaling, commu- additional layer of security by verifying whether nications, and positioning. As shown in Fig. 1, in the received message is sent from a correct or the case of cars, a VLC transmitter is connected possible position. to each of the two headlamps and two taillights VLC also presents a few challenges when to create four VLC-capable lights transmitting used in outdoor environments, most of which the same signal; a photodetector is placed next have been investigated in existing literature [10]. to each of these four lights and connected to a Severe weather conditions: Heavy fog, rain, VLC receiver. Additional photodetectors can be or snow could create additional attenuation to installed on the rear facing side of each of the the transmitted optical signal, shortening the two side rearview mirrors to provide communi- operation range. However, existing work [11] has cation coverage to vehicles on the side. In the shown that a VLC receiver has better sensitivity case of motorcycles or scooters, both the head- than human eyes; this implies that, in these dras- lamp and the taillight are connected to the VLC tic weather conditions, VLC will be able to transmitters, creating two VLC-capable lights receive a message before human eyes can per- transmitting the same signal, and a photodetec- ceive the light from the same transmitting light, tor is installed right next to each of these two proving the usefulness of VLC.
Recommended publications
  • Automotive Lighting and Human Vision
    Automotive Lighting and Human Vision Bearbeitet von Burkard Wördenweber, Jörg Wallaschek, Peter Boyce, Donald D. Hoffman 1. Auflage 2007. Buch. xviii, 410 S. Hardcover ISBN 978 3 540 36696 6 Format (B x L): 15,5 x 23,5 cm Gewicht: 801 g Weitere Fachgebiete > Technik > Elektronik > Mikrowellentechnik Zu Leseprobe schnell und portofrei erhältlich bei Die Online-Fachbuchhandlung beck-shop.de ist spezialisiert auf Fachbücher, insbesondere Recht, Steuern und Wirtschaft. Im Sortiment finden Sie alle Medien (Bücher, Zeitschriften, CDs, eBooks, etc.) aller Verlage. Ergänzt wird das Programm durch Services wie Neuerscheinungsdienst oder Zusammenstellungen von Büchern zu Sonderpreisen. Der Shop führt mehr als 8 Millionen Produkte. Contents 1 Introduction ......................................................................................1 2 How Vision Constructs Reality .......................................................9 2.1 Visual construction ......................................................................9 2.1.1 Constructing shape and depth ............................................10 2.1.2 Constructing shading and colour .......................................16 2.1.3 Constructing objects and their parts...................................23 2.1.4 Limits of attention..............................................................29 2.1.5 General principles..............................................................29 2.2 Models of visual perception.......................................................33 2.2.1 Signal detection
    [Show full text]
  • Sylvania Automotive Cross Reference
    Sylvania Automotive Cross Reference Jessee pilgrimaged speechlessly if shrubby Lucius mislaying or flunk. Fermentable Rabi slagging very suably while Paten remains spinning and lifeless. No-account and drenched Eldon chronologizes almost limitlessly, though Reece theatricalizes his fresnels postured. If you can have a lamp an old fashioned bulbs; sylvania products or incondicent bulbs cross reference guide on eligible for night driving The Sylvania Automotive Previous NAED 34767 replacement lamp has a part three of BC9779 H13 Series Bulbs It's that surpass The best work Every Toyota. Headlight and explore Light rugged Cross Reference Guide PIAA. To a ZEVO Bluetooth LED controller made by SYLVANIA Automotive Lighting. LIGHT SYLVANIA sylvania fluorescent tubes Sylvania Light. SYLVANIA Automotive the automotive lighting industry healthcare has. See that others emit light bulbs cross references are absolutely essential to sylvania automotive cross reference information in store at an indoor space provided by means that shifts the trigeminal or would like. Sylvania Auto Light Bulbs Parts & Accessories Walmartcom. 921 LED over Bulb Upgrade Extremely Bright T15 912 W16W LED 921 Bulbs. Headlight Bulb Replacement Sylvania vs Phillips Toyota. If it can getting hot and sylvania automotive cross reference chart ideas about automotive, cross reference below to your local our hard to replace them out our! Bulb Replacement Guide 3000-Series Bulbs. SYLVANIA Automotive Replacement Bulbs Up to 100 Longer Life OEM Certified Automotive Light Bulb Replaces Standard Signal Lighting in all cars. SYLVANIA 99 Sylvania Capsylite IR PAR Lamps. Use our Automotive Bulb Finder to identify replacement bulbs for your car public truck or SUV. Sylvania h11 fits what vehicle from Sun Tanning.
    [Show full text]
  • Light Signalling and Lighting Requirements for ADS Vehicles
    Prepared by the experts from The International Document No. ITS/AD-15-05a-Rev1 Automotive Lighting and Light Signalling Expert Group (15th ITS/AD, 21 June 2018, (GTB) agenda item 3-2) Light Signalling and Lighting Requirements for ADS Vehicles This is a corrected version of the file presented to the ITS/AD Group on 21 June 2018. The corrigendum concerns the second paragraph on page 17 that has been corrected, to avoid any suggestion that the work should be carried out initially under the 1958 agreement and subsequently transferred into a GTR, as follows: • develop one set of global technical requirements suitable for implementation initially under the 1958 and 1998 Agreements and subsequently under the 1998 Agreement Geoffrey R Draper GTB President 03 July 2018 G T B The International Automotive Lighting GTB Document No. CE-5523 10 June 2018 and Light Signalling Expert Group 1 Groupe de Travail “Bruxelles 1952” Prepared by the experts from The International Document No. ITS/AD-15-05a-Rev1 Automotive Lighting and Light Signalling Expert Group (15th ITS/AD, 21 June 2018, (GTB) agenda item 3-2) Light Signalling and Lighting Requirements for ADS Vehicles • Safety signals – A two-stage approach • Road Scene illumination Please refer also to GRE-79-36e Author: Helmut Tiesler-Wittig GTB Focus Group on ADS Lighting G T B The International Automotive Lighting GTB Document No. CE-5523 10 June 2018 and Light Signalling Expert Group 2 Groupe de Travail “Bruxelles 1952” Content Light-Signalling for ADS Vehicles i. Motivation for the activities in GTB ii. Justification iii.
    [Show full text]
  • Philips Automotive Lighting Catalog
    Philips Automotivelighting Automotive lighting Safety you can see Catalog 2016-2017 Safety you can see! Our advanced light engine that constantly improve road technology has been on the safety and increase forefront of automotive lighting for workshop productivity. Our more than 100 years. products are designed to As a leading supplier of lamps and perform efficiently and lighting products to the automotive durably for continuous industry and aftermarket, we customer satisfaction. Many combine technical innovations with garages and workshops a genuine concern for safety and already appreciate our new driving comfort. range of LED inspection Our automotive lighting is today the lamps for their outstanding choice of many consumers and light output and robustness. major automobile manufacturers. Our mission is to introduce High-quality lighting really innovative products does make a difference. That’s safety you can see! New text to be translated 2 High manufacturing standards Original Equipment Quality We are committed to producing • We are the choiceoice ofof majormajor car best-in-class products and services manufacturers in the Original Equipment Manufacturer • Our lighting equipsquips oonene iinn two carcarss in (OEM) market and automotive aftermarket. Europe and onene in three in the worldworld Our products are manufactured from high-quality materials and tested to • Manufacturingg processes that exceedexceed the highest specifications to maximize current industryry sspecificationspecifications safety and driving comfort of our customers. Philips anti-UV-quartz glass for optimal lighting performance All our halogen and xenon headlamps are made with high-quality anti-UV quartz glass • More powerful light • Better resistance • Optimal protection Quartz glass high resistance Philips quartz glass lamps against ultraviolet rays allows for increased pressure (filament at 2 650°C and glass All Philips quartz-glass lamps inside the lamp and thus at 800°C) are capable are coated with a special anti-UV generates more powerful light.
    [Show full text]
  • GE Lamp & Ballast Products Catalog
    gelighting.com Lamps Introduction Incandescent GE Miniature and Sealed Beam Product Abbreviations Ordering Information The abbreviations used in this catalog include: GE Miniature and Sealed Beam Lamps are designed for those A Amperes C.P. Candlepower applications requiring specific bulb size, base, and oltage.v These ANSI American National Cand. Candelabra lamps are operated on vehicles (cars, trucks, boats, aircraft, Standards Institute PAR P arabolic Aluminized tractors) or in special applications utilizing low voltage sources. Bay. Bayonet Reflector Halogen Most lamps are designated by common ANSI (American National D.C. Double Contact Pf. Prefocus Standards Institute) lamp numbers and lamps in this section are ECE European Common SAE Society of Automotive arranged in numerical order. To assist you in identifying lamps, Market (European Motor Engineers (US Motor drawings (not to scale) are provided, along with descriptions of bulb Vehicle Standards) Vehicle Standards) and base sizes. Flg. Flanged Sc. Screw Specific market segments covered in this section are products used in: HID High Intensity Discharge S.C. Single Contact Aircraft Emergency Building Lighting Marine LCL Light Center Length Spec. Special IntensityHigh Automotive Flashlight/Hand Lanterns Medical/Instruments Discharge Agriculture Garden/Outdoor Telephone Min. Miniature Tel. Telephone CIM/Tractor Indicator Toys/Entertainment MOL Maximum Overall Length Term. Terminals MSCP Mean Spherical V Volts For additional specifications refer to the Automotive Lamp Catalog Candlepower obtained through your GE Sales Office. Automotive Selection Guide W Watts also available. Nom. Nominal C.I.M. Construction & Industrial Finding and Ordering a Lamp Machinery Most Miniature Lamps have a number on the base or bulb. Generally Fluorescent it will match the lamp number in this catalog, which is sorted in GE Miniature Lamp Prefixes numeric order (prefixes last).
    [Show full text]
  • Light Bulb Cross Reference Chart
    Light Bulb Cross Reference Chart Which Tray line-ups so modishly that Avram abjure her litholapaxy? Presented and toiling Richmond massagesqueue her railerthat kumquats bays half-wittedly duplicates or restrictedlyclamor unchangeably, and chords issteaming. Tedie unexalted? Uncursed Harland Here is measured by the chart and the same socket which are offered in it, volts and life tests are. Light Bulbs Etc Inc 0 items 000 Your shopping cart should empty Categories Incandescent Bulbs LED Products. Headlight bulb cross reference DodgeForumcom. Cross reference neon tubing chart for signage Light Sources. Replacement Bulb Cross Reference Chart Petco. Sylvania in candelabra and levering screwdrivers as auxiliary lighting, wiko and socket. Bulbs that is logged at the chart. Filament wire reduces thermal protector wiring, light to reference chart for ordering the lights better downroad, and any auto tale? These are bulbs that answer will remind in the charge with chance of them playing to key role in. Did a light? Austin machine and money for the amount of a cross reference. The light bulb cross referenced on the locking tab designs are. We will never guarantee a bulb reference from the lighting regulations within these cookies may be taken into consideration should be inadequate contact is copyrighted property of. 3157 Bulb Guide Today sulfur is tri cents LED precise and level one's a replacement for american car or motorcycle bulbs 3157 Bulb Cross Reference 3157 T25 3155. Looking for as rich text field within the lighting technologies including optimized energy costs. Auto Headlight Bulbs Cross Reference Guide LED-Colight. Light transparent cross reference Harley to regular Harley Davidson.
    [Show full text]
  • Fabrication of Right Triangular Prism Retroreflectors Through 3½½-Axis Ultraprecise Single Point Inverted Cutting
    COMPUTER-AIDED DESIGN & APPLICATIONS, 2017 VOL. 14, NO. 5, 693–703 http://dx.doi.org/10.1080/16864360.2016.1273586 Fabrication of right triangular prism retroreflectors through 3½½-axis ultraprecise single point inverted cutting Benjamin W. Hamilton a, Sama Hussein a, Nicolas Milliken a, O. Remus Tutunea-Fatan a and Evgueni V. Bordatchev b aWestern University, London, Canada; bNational Research Council of Canada, Canada ABSTRACT KEYWORDS Retroreflectors (RR) are passive optical structures that are capable of returning incident light back to Automotive lighting; the source. The focus of the current study is represented by the right triangular prism (RTP) geometry retroreflector design; optical which could be a more efficient alternative to the traditional inverted corner cube geometry. While performance; 3½½-axis current manufacturing practices rely solely on the use of conventional pin-bundling techniques, the diamond cutting work reported in this study presents further enhancements of the previously introduced ultraprecise single point inverted cutting technique which can be used in a manner approximately similar to 3½½-axis kinematics. The experimental results obtained have demonstrated both the feasibility of the proposed fabrication approach as well as the optical viability of the fabricated RTP elements. 1. Introduction example in this category is represented by the taillights A retroreflector (RR) is a passive optical device that installed on virtually all transportation vehicles [11]. reflects light back to the originating source through a However, the fabrication of the corner cube geome- range of incident angles deviating from the normal axis. try poses an inherent challenge in a sense that rotating RRs can be divided into two categories: lens-and-mirror, toolscannotbeusedtoproducethegeometryofthe and inverted corner cube (ICC).
    [Show full text]
  • Safety Adaptive Lighting Provides Precise Patterns TIM MORAN AUTOMOTIVE NEWS EUROPE
    AN_suppl_051031_13-15.qxd 19.10.2005 19:25 Uhr Page 13 Safety Adaptive lighting provides precise patterns TIM MORAN AUTOMOTIVE NEWS EUROPE ver since lights were added Eto vehicles, it seems people have tried to find ways to make them swivel and focus to help drivers see their way. The problem with early attempts to “steer” headlights was the relatively low power of the beams, limitations of the sealed-beam headlamp designs that dominated the automotive sector from 1941 through 1983 and the difficulty of truly matching mechanical linkages to what the driver needed to see. Today, adaptive lighting offers a new start with a clean slate and effective technology. When the adaptive lighting system on the new Mercedes-Benz S class determines the driver is Choices, choices rounding a curve, it changes the angle of the headlight beam. Adaptive lighting systems divide into two broad categories. One uses additional bulbs housed Light my way in specially engineered reflectors Bright future transparent. By making one or within the headlight lens Primary suppliers of more thin sandwiched layers assembly to switch on extra adaptive lighting for dim mirrors react with the gel, a darker and lights. The other uses motors and ● Automotive Lighting darker filter can be placed over projector lenses to mechanically ● Denso he 2006 Citroen C6, the silvery reflective layer of pivot one or both headlamps. ● Hella TPSA/Peugeot-Citroen’s new the mirror. Think of an eyeball in a socket. ● Osram upper-medium car, carries The mirrors use a The systems can work with ● Philips external and internal rear-view complementary metal oxide either halogen bulbs or xenon ● II Stanley mirrors from US supplier semiconductor chip to sense high-intensity discharge bulbs.
    [Show full text]
  • Additional Automotive Lighting If It Is Functioning Properly Before Reinserting the Socket Or Replacing the Lens
    bulb is switched off. Once the bulb has been replaced, check to see Additional Automotive Lighting if it is functioning properly before reinserting the socket or replacing the lens. In addition to headlights, your vehicle is equipped with miniature lamps that are used in taillights, brake lights, turn signals, back-up Checking and maintaining your vehicle’s lighting system regularly is lights and license plate lights. easy and doesn’t take much time. This maintenance can go a long way toward making your car safer. It can also save you the costs and Access to the front exterior lamps can usually be found in the back hassles of an accident or traffic fine! of the lamp assembly. Often you can reach under the fender or behind the bumper to get to a lamp socket. If you can’t access it there, look under the hood. In some cases, the headlight assembly must be removed to gain access to these bulbs. Rear lighting can be reached through the trunk. Because the lights may be covered with carpeting or protective covers, they may not be easy to find. Those sockets not accessible through the trunk can usually be reached by removing a lens. The high-mount brake light found on most late model vehicles can be accessed by removing its cover or the mounting screws and then lifting off the assembly to reach the bulb from the bottom. Once you gain access to the bulb socket, determine whether it is For more information about Making Sense of Car Care, plastic or metal.
    [Show full text]
  • Headlamp History and Harmonization
    UMTRI-98-21 HEADLAMP HISTORY AND HARMONIZATION David W. Moore June 1998 HEADLAMP HISTORY AND HARMONIZATION David W. Moore The University of Michigan Transportation Research Institute Ann Arbor, Michigan 48109-2150 U.S.A. Report No. UMTRI-98-21 June 1998 Technical Report Documentation Page 1. Report No. 2. Government Accession No. 3. Recipient’s Catalog No. UMTRI-98-21 4. Title and Subtitle 5. Report Date Headlamp History and Harmonization June 1998 6. Performing Organization Code 302753 7. Author(s) 8. Performing Organization Report No. David W. Moore UMTRI-98-21 9. Performing Organization Name and Address 10. Work Unit no. (TRAIS) The University of Michigan Transportation Research Institute 11. Contract or Grant No. 2901 Baxter Road Ann Arbor, Michigan 48109-2150 U.S.A. 12. Sponsoring Agency Name and Address 13. Type of Report and Period Covered The University of Michigan Industry Affiliation Program for 14. Sponsoring Agency Code Human Factors in Transportation Safety 15. Supplementary Notes The Affiliation Program currently includes Adac Plastics, BMW, Bosch, Britax International, Chrysler, Corning, Delphi Interior and Lighting Systems, Denso, GE, GM NAO Safety Center, Hella, Hewlett-Packard, Ichikoh Industries, Koito Manufacturing, LESCOA, Libbey-Owens-Ford, Magneti Marelli, North American Lighting, Osram Sylvania, Philips Lighting, PPG Industries, Reflexite, Stanley Electric, Stimsonite, TEXTRON Automotive, Valeo, Visteon, Wagner Lighting, 3M Personal Safety Products, and 3M Traffic Control Materials. Information about the Affiliation Program is available at: http://www.umich.edu/~industry/ 16. Abstract This report describes the development of automobile headlamps. The major topics covered include the following: the reasons for the emergence and use of different light sources, headlamp materials, optical controls, and aiming methods; differences between U.S.
    [Show full text]
  • Leds and Power Consumption of Exterior Automotive Lighting: Implications for Gasoline and Electric Vehicles
    UMTRI-2008-48 OCTOBER 2008 LEDS AND POWER CONSUMPTION OF EXTERIOR AUTOMOTIVE LIGHTING: IMPLICATIONS FOR GASOLINE AND ELECTRIC VEHICLES BRANDON SCHOETTLE MICHAEL SIVAK YOSHIHIRO FUJIYAMA LEDS AND POWER CONSUMPTION OF EXTERIOR AUTOMOTIVE LIGHTING: IMPLICATIONS FOR GASOLINE AND ELECTRIC VEHICLES Brandon Schoettle Michael Sivak Yoshihiro Fujiyama The University of Michigan Transportation Research Institute Ann Arbor, Michigan 48109-2150 U.S.A. Report No. UMTRI-2008-48 October 2008 Technical Report Documentation Page 1. Report No. 2. Government Accession No. 3. Recipients Catalog No. UMTRI-2008-48 4. Title and Subtitle 5. Report Date LEDs and Power Consumption of Exterior Automotive October 2008 Lighting: Implications for Gasoline and Electric Vehicles 6. Performing Organization Code 302753 7. Author(s) 8. Performing Organization Report No. Schoettle, B., Sivak, M., and Fujiyama, Y. UMTRI-2008-48 9. Performing Organization Name and Address 10. Work Unit no. (TRAIS) The University of Michigan Transportation Research Institute 11. Contract or Grant No. 2901 Baxter Road Ann Arbor, Michigan 48109-2150 U.S.A. 12. Sponsoring Agency Name and Address 13. Type of Report and Period Covered The University of Michigan Industry Affiliation Program for 14. Sponsoring Agency Code Human Factors in Transportation Safety 15. Supplementary Notes The Affiliation Program currently includes Alps Automotive/Alpine Electronics, Autoliv, BMW, Chrysler, Com-Corp Industries, Continental Automotive Systems, Denso, Federal- Mogul, Ford, GE, General Motors, Gentex, Grote Industries, Hella, Hitachi America, Honda, Ichikoh Industries, Koito Manufacturing, Lang-Mekra North America, Magna Donnelly, Mitsubishi Motors, Muth, Nissan, North American Lighting, OSRAM Sylvania, Philips Lighting, Renault, SABIC Innovative Plastics, Sisecam, SL Corporation, Stanley Electric, Toyota Technical Center USA, Truck-Lite, Valeo, Visteon, and 3M Visibility and Insulation Systems.
    [Show full text]
  • DECEMBER 2014 L DHS 20 /- L 2014 LDECEMBER USD 98 ISSUE 5.99
    TP www.tiresandparts.net DHS 20 /- L USD 5.99/- l DECEMBER 2014 2014 DECEMBER l The Middle East’s First Automotive, Tires & Parts News Source ISSUE 98 98 ISSUE Hot Products / Page 64 Dropcam PUBLISHER’S NOTE November has been an eventful month for those in the automotive field. There has been considerable speculation that the four month downtrend in oil prices may lead to a decrease in the demand for electric and hybrid vehicles. You may be highly tempted to go out and buy the gas guzzler SUV you have always wanted. The last time oil prices were this low was back in 2010. However, lower oil prices need not necessarily guarantee lower fuel bills for the long term. There is no question that petroleum reserves are dwindling at an alarming rate. As long as we accept this fact, temporary shifts in the oil price do not give consumers any real benefit. It may lead to a short-term decrease in fuel prices, but one fine day, when the long-term outlook is factored in, new, sustainable technologies that increase fuel economy will look more attractive than ever. Unless cheaper sources of energy like solar energy can be commercially harnessed, it still makes sense for the automotive industry and the tire industry to invest in sustainable technologies. Coming to the tire industry, one of the major topics of conversation has been the move by the US Commerce Department to impose anti dumping and countervailing duties against the import of passenger vehicle and light truck tires from China. The final decision will not be made until mid- January but the Chinese have been accused of dumping tires at prices much below the market rate in the US market.
    [Show full text]