Pre-Cut Ready to Install Kits Year • Make • Model Specific 1928-48

1928-48 Early Mopar Catalog Automotive Thermal Acoustic Insulation Dodge Chrysler, Plymouth, Desoto Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat

•Reduce Road Noise •Reduce Exhaust Harmonics Pre-Cut Ready to Install Kits •Eliminate Mechanical Noise •Stop Body Panel Vibration Year • Make • Model Specific •Reduce Radiated & Reflected Heat •Stop Audio System Vibration The Coolest Cars Have QuietRIDE Inside! ™

Kits are available for these Vehicles See AcoustiTrunk Catalog Roof Kit Roof & Quarter Panels above beltline.

Cowl Kit Panels between the firewall and front door of the vehicle. Trunk Floor Kit Trunk Floor & Tire Well Firewall Insulator Fits under dash against the firewall bulkhead.

Door Kit All Doors

Body Panel Kit All Panels below the beltline including Package Tray, Seat Divider, Rear Wheel Wells, Fenders, Rear Quarters and Tail Panels (As Required)

Floor Kit Front Floor, Rear Floor, Transmission Hump/ Driveline

Everything in One Box to Do the Job Right! Pre-Cut, Ready To install Kits are Year, Make and Model Specific and include: •Dynamat Xtreme •Heat Shield Barrier Insulation Order Line: 888-777-3410 Tech Line: 209-942-4777 •Spray Adhesive •Seam Tape Fax: 877-720-2360 •Illustrated Instructions 1122 S. Wilson Way Ste. #1, Stockton CA, 95205

For more information contact us at: [email protected] ©2003-21 •Prices Subject to Change Without Notice 1935-2014 1928-48 Ram/Dodge Truck Catalog Early Mopar Catalog Automotive Thermal Acoustic Insulation Dodge Chrysler, Plymouth, Desoto Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat

Introducing a multi-stage, automotive insulation and sound damping system to give MOPAR cars the “quiet riding comfort” found in today’s new cars. AcoustiSHIELD kits are designed on current “state-of-the-art” auto acoustic technology, to insulate and control the noise, vibration and heat in the passenger cabin. Kits are pre-cut and come with easy-to-follow installation instructions-----everything you need to do the job right. 1928-481935-2014 Ram/Dodge Truck Catalog Early Mopar Catalog Automotive Thermal Acoustic Insulation Dodge Chrysler, Plymouth, Desoto Roof to Road Solutions to Control Passenger Cabin Noise, Vibration and Heat

1937-39 MOPAR Two-Door Sedan MOPAR 3739-TDAK 1937-39 Mopar Two-Door Sedan Complete Kit 775 MOPAR 3739-TDBPK 1937-39 Mopar Two-Door Sedan Body Panel Kit 146 MOPAR 3739-TDCK 1937-39 Mopar Two-Door Sedan Cowl Insulation Kit 58 MOPAR 3739-TDFK 1937-39 Mopar Two-Door Floor Insulation Kit 261 MOPAR 3739-TDRK 1937-39 Mopar Two-Door Sedan Roof Insulation Kit 146 MOPAR 3739-TDTK 1937-39 Mopar Two-Door Sedan Trunk Insulation Kit 146 ASU-DDBIK-2 Universal 2 Door Damper/Barrier Insulation Kit 67

1937-39 MOPAR Four-Door Sedan MOPAR 3738- 1937-38 MOPAR Steering Column Boot 152 MOPAR 3739-FDAK 1937-39 Mopar Four-Door Sedan Complete Kit 864 SCB Original Factory Style Steering Column Boot MOPAR 3739-FDBPK 1937-39 Mopar Four-Door Sedan Body Panel Kit 131 used in 1937-38 Chrysler, Dodge, DeSoto, MOPAR 3739-FDCK 1937-39 Mopar Four-Door Sedan Cowl Insulation Kit 101 and Plymouth cars. Leather Grain Cover- MOPAR 3739-FDFK 1937-39 Mopar Four-Door Sedan Floor Insulation Kit 261 -ready to install. Black. Easily painted. MOPAR 3739-FDRK 1937-39 Mopar Four-Door Sedan Roof Insulation Kit 146 MOPAR 3739-FDTK 1937-39 Mopar Four-Door Sedan Trunk Insulation Kit 146 ASU-DDBIK-4 Universal 4 Door Damper/Barrier Insulation Kit 131

Other 1937-39 MOPAR Products (Sold Separately) MOPAR 3739-SPKG 1937-39 Mopar Sedan Package Tray 70 MOPAR 3739-CSP 1937-39 Mopar Cowl Side Panels 70 MOPAR 3739-SD 1937-39 Mopar Seat Divider & Step 15 MOPAR 3738-BSC 1937-1938 Mopar Steering Column Boot 152

Firewall InsulatorTechnical Note: The Chrysler Corporation was very consistent with sharing the same firewall pattern betweens its brands throughout the 20s, 30s, 40s and 50s. If you don’t see your exact make and model, one of the other brands listed may well be the same and require only a slight modification of the punch outs which we will gladly accommodate. Please contact our office for assistance. Chrysler Cars Stop Engine Heat at the Source 1928-1948

Made Right - To Fit Right -- To Stop Engine Heat

Part # Description MSRP CHRY 2800-65-C 1928 Chrysler Model 65 Victory 6 Firewall Insulator Panel 254 CHRY 2829-72-C 1928 Chrysler Model 72 Firewall Insulator Panel 254 CHRY 2829L-C 1928-1929 Chrysler Model L Firewall Insulator Panel 254 CHRY 2900-65-C 1929 Chrysler Model 65 Firewall Insulator Panel 254 CHRY 2900-75-C 1929 Chrysler Model 75 Firewall Insulator Panel 254 CHRY 3100CD8-C 1931 Chrysler Model CD-8 Firewall Insulator Panel 254 CHRY 3132CG-C 1931-1932 Chrysler Model CG Imperial Firewall Insulator Panel 221 CHRY 3132CM6-C 1931-1932 Chrysler Model CM-6 Firewall Insulator Panel 221 CHRY 3200CD8-C 1932 Chrysler Model CD-8 Firewall Insulator Panel 254 CHRY 3234CH-C 1932-1933 Chrysler Model CH Firewall Insulator Panel 254 CHRY 3200CL-C 1932-34 Chrysler Model CL Firewall Insulator Panel 254 CHRY 3300CQ-C 1933-1934 Chrysler Model CQ Firewall Insulator Panel 254 CHRY 3234CA-C 1933-1934 Chrysler Model CA Firewall Insulator Panel 221 CHRY 3334CB-C 1933-1934 Chrysler Model CB Firewall Insulator Panel 221 CHRY 3500AS-C 1935 Chrysler Airstream Firewall Insulator Panel 221 CHRY 3600AF-C 1936 Chrysler Airflow Firewall Insulator Panel 221 CHRY 3600C8-C 1936 Chrysler Model C-8 Firewall Insulator Panel 221 CHRY 3700-C 1937 Chrysler Firewall Insulator Panel 221 CHRY 3800C14-C 1938 Chrysler Model C-14 Imperial/New Yorker Firewall Insulator Panel 221 CHRY 3900C23-C 1939 Chrysler Model C-23 Imperial Firewall Insulator Panel 254 CHRY 3900C23-CSP 1939 Chrysler Model C-23 Imperial Cowl Panel Set 118 CHRY 4000C27-C 1940 Chrysler Model C-27 Firewall Insulator Panel 254 CHRY 4100-C 1941 Chrysler Firewall Insulator Panel 254 CHRY 4248-C 1942-1948 Chrysler Firewall Insulator Panel 309 CHRY 4248-CSP 1942-1948 Chrysler Cowl Panel Set 118 MOPAR 3738-SCB 1937-1938 MOPAR (Chrysler, DeSoto, Dodge, Plymouth) Steering 152 Column Boot

Firewall Insulator can be ordered for Restoration (factory Holes) or for Restomod (No Holes). DeSoto Cars Stop Engine Heat at the Source 1928-1948

Made Right - To Fit Right -- To Stop Engine Heat

Part # Description MSRP DESO 2800-C 1928 Desoto Firewall Insulator Panel 254 DESO 2830K-C 1928-1930 Desoto Model K Firewall Insulator Panel 254 DESO 3000CF-C 1930 Desoto Model CF-8 Cyl Firewall Insulator Panel 221 DESO 3031CK-C 1930-1931 Desoto Model CK Firewall Insulator Panel 254 DESO 3032CF-C 1930-1932 Desoto Model CF-8 Cyl Firewall Insulator Panel 254 DESO 3100SA-C 1931 Desoto Model SA Firewall Insulator Panel 221 DESO 3600S1-C 1936 DeSoto Model S-1 Firewall Insulator Panel 221 DESO 3600S2-C 1936 DeSoto Model S-2 Firewall Insulator Panel 221 DESO 3800S5-C 1938 DeSoto Model S-5 Firewall Insulator Panel 221 DESO 4100-C 1941 DeSoto Firewall Insulator Panel 254 DESO 4248-C 1942-1948 DeSoto Firewall Insulator Panel 309 MOPAR 3738-SCB 1937-1938 MOPAR (Chrysler, DeSoto, Dodge, Plymouth) 152 Steering Column Boot

Firewall Insulator can be ordered for Restoration (factory Holes) or for Restomod (No Holes). Dodge Cars Stop Engine Heat at the Source 1928-1948

Made Right - To Fit Right -- To Stop Engine Heat

Part # Description MSRP DODGE 2800S6-C 1928 Dodge Standard 6 Firewall Insulator Panel 254 DODGE 2800S6-CSP 1928 Dodge Standard 6 Cowl Panel Set 254 DODGE 2800V6-C 1928 Dodge Victory Six Firewall Insulator Panel 254 DODGE 2900V6-C 1929 Dodge Victory Six Firewall Insulator Panel 254 DODGE 2930DA-C 1929-1930 Dodge Model DA Firewall Insulator Panel 254 DODGE 2930DA-CSP 1929-1930 Dodge Model DA Cowl Side Panels 254 DODGE 3000CF-C 1930 Dodge CF Firewall Insulator Panel 254 DODGE 3000DC68-C 1930 Dodge DC-6 and 8 Cylinder Firewall Insulator Panel 254 DODGE 3300DO-C 1933 Dodge Model DO Firewall Insulator Panel 221 DODGE 3300DP-C 1933 Dodge Model DP Firewall Insulator Panel 254 DODGE 3334DR-C 1933-1934 Dodge Model DR Firewall Insulator Panel 254 DODGE 3334DS-C 1933-1934 Dodge Model DS Firewall Insulator Panel 254 DODGE 3600D2-C 1936 Dodge Model D-2 Firewall Insulator Panel 221 DODGE 3600D2-CSP 1936 Dodge Model D-2 Cowl Side Panel Set 118 DODGE 3700D2-C 1937 Dodge Model D-2 Firewall Insulator Panel 221 DODGE 3700D5-C 1937 Dodge Model D-5 Firewall Insulator Panel 221 DODGE 3739-CSP 1937-1939 Dodge Cowl Side Panels 118 DODGE 3739-FDSPKG 1937-1939 Dodge Four-Door Sedan Package Tray 90 DODGE 3739-FDSSD 1937-1939 Dodge Four-Door Sedan Seat Divider Panel 90 DODGE 3739-TDSPKG 1937-1939 Dodge Two-Door Sedan Package Tray 90 DODGE 3739-TDSSD 1937-1939 Dodge Two-Door Sedan Seat Divider Panel 118 DODGE 3800D4-C 1938 Dodge Model D-4 Firewall Insulator Panel 221 DODGE 3800D8-C 1938 Dodge Model D-8 Firewall Insulator Panel 221 DODGE 3942D10-C 1939-1942 Dodge Model D-10 Firewall Insulator Panel 254 DODGE 3942D10-CSP 1939-1942 Dodge Model D-10 Cowl Panel Set 118 DODGE 4247-CSP 1942-1948 Dodge Cowl Panel Set 118 DODGE 4248-C 1942-1948 Dodge Firewall Insulator Panel 309 MOPAR 3738-SCB 1937-1938 MOPAR (Chrysler, DeSoto, Dodge, Plymouth) 152 Steering Column Boot

Firewall Insulator can be ordered for Restoration (factory Holes) or for Restomod (No Holes). Plymouth Cars Stop Engine Heat at the Source 1928-1948

Made Right - To Fit Right -- To Stop Engine Heat

Part # Description MSRP PLY 3132-PB-C 1931-1932 Plymouth Model PB Firewall Insulator Panel 221 PLY 3200PA-C 1932 Plymouth Model PA Firewall Insulator Panel 221 PLY 3200PB-C 1932 Plymouth Model PB Firewall Insulator Panel 221 PLY 3334DR-C 1933-1934 Plymouth Model DR Firewall Insulator Panel 221 PLY 3334PE-C 1933-1934 Plymouth Model PE Firewall Insulator Panel 221 PLY 3334PF-C 1933-1934 Plymouth Model PF Firewall Insulator Panel 221 PLY 3500PJ-CSP 1935 Plymouth Model PJ Cowl Panel Set 221 PLY 3600P2-C 1936 Plymouth Model P-2 Firewall Insulator Panel 221 PLY 3700P4-C 1937 Plymouth Model P-4 Firewall Insulator Panel 221 PLY 3900P7-C 1939 Plymouth Model P-7 Firewall Insulator Panel 254 PLY 3900P8-C 1939 Plymouth Model P-8 Firewall Insulator Panel 254 PLY 3942P10-C 1939-1942 Plymouth Model P-10 Firewall Insulator Panel 254 PLY 4248-CSP 1942-1948 Plymouth Model P-15 Cowl Panel Set 118 PLY 4248P15-C 1942-1948 Plymouth Model P-15 Firewall Insulator Panel 309 MOPAR 3738-SCB 1937-1938 MOPAR (Chrysler, DeSoto, Dodge, Plymouth) 152 Steering Column Boot

Firewall Insulator can be ordered for Restoration (factory Holes) or for Restomod (No Holes). 1937-39 MOPAR Four-Door Sedan Complete AcoustiShield Insulation Kit MOPAR 3739-FDAK Automotive Thermal Acoustic Insulation Plymouth and Dodge Cars

Cowl Kit Floor Kit Roof Kit

Body Panel Kit

ASU-DDBIK-4 Universal 4-Door Damper/Barrier Insulation Kit For 4-Door Sedans with upholstered door panels. Includes Dynamat Xtreme damper pads, WeatherBarrier Insulation, double- sided foam tape and Instructions. Easy to Install.

The Firewall Insulator and Fresh Air Heater Plenum for this vehicle are also available. Please see our Firewall Insulator Section in this catalog. 1937-39 MOPAR Two-Door Sedan Complete AcoustiShield Insulation Kit MOPAR 3739-TDAK Automotive Thermal Acoustic Insulation Plymouth and Dodge Cars

Cowl Kit Floor Kit Roof Kit

Body Panel Kit

Trunk Kit

ASU-DDBIK-2 Universal 2-Door Damper/Barrier Insulation Kit For 2-door Coupes, Convertibles, Trucks with upholstered door panels. Includes Dynamat Xtreme damper pads, Weather- Barrier Insulation, double-sided foam tape and Instructions. Easy to Install. The Firewall Insulator and Fresh Air Heater Plenum for this vehicle are also available. Please see our Firewall Insulator Section in this catalog. Chrysler Cars Stop Engine Heat at the Source 1928-1948

Made Right - To Fit Right -- To Stop Engine Heat

Firewall Insulator can be ordered for Restoration (factory Holes) or for Restomod (No Holes). 1928-48 Chrysler Firewall Insulator Panels The Firewall bulkhead in many of the Post-War Chrysler, Dodge, DeSoto and Plymouth cars was commonly shared across production lines with the addition or deletion of a hole here and there to accomodated brand specific engines and accessory equipment. Compare the images in this section of the catalog with the passenger side of your firewall bulkehead to determine which Insulator panel most closely matches the basic hole con- figuration on your vehicle. If the firewall in your vehicle is slightly different than the illustrations you see here, contact our office for assistance.

CHRY 2800-65-C CHRY 2829-72-C 1928 Chrysler Model 65 Firewall Insulator Panel 1928-29 Chrysler Model “72” Firewall Insulator Panel Original Factory Style firewall insulator for the 1928 Chrysler Original Factory Style firewall insulator for the 1928-29 Model 65. Leather Grain over--ready to install with insulation. Chrysler Model “72”. Leather Grain Cover--ready to install with Molded to fit the stock engine setback hump. insulation. Molded to fit the stock engine setback hump.

CHRY 2829L-C CHRY 2900-75-C 1928-29 Chrysler Model “L” Firewall Insulator Panel 1929 Chrysler Model 75 Firewall Insulator Panel Original Factory Style firewall insulator for the 1928-29 Original Factory Style firewall insulator for the 1929 Chrysler Chrysler Model “L”. Leather Grain Cover--ready to install with Model 65. Leather Grain Cover--ready to install with insula- insulation. Molded to fit the stock engine setback hump. tion. Molded to fit the stock engine setback hump.

Firewall Insulators can be ordered with out holes for customs and street rods. 1928-48 Chrysler Firewall Insulator Panels

CHRY 2900-75-C CHRY 3100CD-8-C 1929 Chrysler Model 75 Firewall Insulator Panel 1931 Chrysler Model CD-8 Firewall Insulator Panel Original Factory Style firewall insulator for the 1929 Chrysler Original Factory Style firewall insulator for the 1931 Chrysler Model 75. Leather Grain Cover--ready to install with insula- Model CD-8. Leather Grain Cover--ready to install with insulation. Molded to fit the stock engine setback hump. tion. Molded to fit the stock engine setback hump.

CHRY 3132CG-C CHRY 3132CM6-C 1931-32 Chrysler Model “CG” Firewall Insulator Panel 1931-32 Chrysler Model “CM6” Firewall Insulator Panel Original Factory Style firewall insulator for the 1931-32 Chrys- Original Factory Style firewall insulator for the 1932-33 Chrys- ler Model “CG”. Leather Grain Cover--ready to install with ler Model “CM6”. Leather Grain Cover--ready to install with insulation. insulation. Molded to fit the stock engine setback hump..

CHRY 3200CD-8-C CHRY 3233CH-C 1932 Chrysler Model CD-8 Firewall Insulator Panel 1932-33 Chrysler Model “CH” Firewall Insulator Panel Original Factory Style firewall insulator for the 1932 Chrysler Original Factory Style firewall insulator for the 1932-33 Chrys- Model CD-8. Leather Grain Cover--ready to install with insula- ler Model “CH”. Leather Grain Cover--ready to install with tion. Molded to fit the stock engine setback hump. insulation. Molded to fit the stock engine setback hump.

Firewall Insulators can be ordered with out holes for customs and street rods. 1928-48 Chrysler Firewall Insulator Panels

CHRY 3234CL-C CHRY 3234CA-C 1932-34 Chrysler Model “CL” Firewall Insulator Panel 1932-34 Chrysler Model “CA” Firewall Insulator Panel Original Factory Style firewall insulator for the 1932-34 Chrys- Original Factory Style firewall insulator for the 1932-34 Chrys- ler Model “CL”. Leather Grain Cover--ready to install with ler Model “CA”. Leather Grain Cover--ready to install with insulation. Molded to fit the stock engine setback hump. insulation.

CHRY 3234CB-C CHRY 3334CQ-C 1932-34 Chrysler Model “CB” Firewall Insulator Panel 1933-34 Chrysler Model “CQ” Firewall Insulator Panel Original Factory Style firewall insulator for the 1932-34 Chrys- Original Factory Style firewall insulator for the 1933-34 Chrys- ler Model “CB”. Leather Grain Cover--ready to install with ler Model “CQ”. Leather Grain Cover--ready to install with insulation. Molded to fit the stock engine setback hump. insulation. Molded to fit the stock engine setback hump.

CHRY 3500AS-C CHRY 3600AF-C 1935 Chrysler Model “Airstream” Firewall Insulator Panel 1936 Chrysler Model “Air Flow” Firewall Insulator Panel Original Factory Style firewall insulator for the 1935 Chrysler Original Factory Style firewall insulator for the 1936 Chrysler “Airstream.” Leather Grain Cover--ready to install with insula- Model “Air FLow”. Leather Grain Cover--ready to install with tion. insulation.

Firewall Insulators can be ordered with out holes for customs and street rods. 1928-48 Chrysler Firewall Insulator Panels

CHRY 3600C8-C CHRY 3700-C 1936 Chrysler Model “C8” Firewall Insulator Panel 1937 Chrysler Model Firewall Insulator Panel Original Factory Style firewall insulator for the 1936 Chrysler Original Factory Style firewall insulator for the 1937 Chrysler. Model “C8”. Leather Grain Cover--ready to install with insula- Leather Grain Cover--ready to install with insulation. tion.

CHRY 3800C14-C MOPAR 3738-SCB 1938 Chrysler Model “C14” Firewall Insulator Panel 1937-38 MOPAR Steering Column Boot Original Factory Style firewall insulator for the 1938 Chrys- Original Factory Style Steering Column Boot used in 1937- ler Model “C14”. Leather Grain Cover--ready to install with 38 Chrysler, Dodge, DeSoto, and Plymouth cars. Leather insulation. Grain Cover--ready to install. Black. Easily painted.

CHRY 3900C23-CSP CHRY 3900C23-C 1939 Chrysler Model “C23” Cowl Panel Set 1939 Chrysler Model “C23” Firewall Insulator Panel Original Factory Style cowl Panel Set for the 1939 Chrysler Original Factory Style firewall insulator for the 1939 Chrys- Model “C23”. Leather Grain Cover--ready to install. ler Model “C23”. Leather Grain Cover--ready to install with insulation. Molded to fit the stock engine setback hump.

Firewall Insulators can be ordered with out holes for customs and street rods. 1928-60 Chrysler Firewall Insulator Panels

CHRY 4000C27-C CHRY 4100-C 1940 Chrysler Model “C27” Firewall Insulator Panel 1941 Chrysler Firewall Insulator Panel Original Factory Style firewall insulator for the 1940 Chrys- Original Factory Style firewall insulator for the 1941 Chrys- ler Model “C27”. Leather Grain Cover--ready to install with ler. Leather Grain Cover--ready to install with insulation. insulation. Molded to fit the stock engine setback hump. Molded to fit the stock engine setback hump.

CHRY 4248-C 1942-48 Chrysler Firewall Insulator Panel CHRY 4248-CSP 1939 Chrysler Cowl Panel Set Original Factory Style firewall insulator for the 1942-48 Original Factory Style cowl Panel Set for the 1942-48 Chrysler. Leather Grain Cover--ready to install with insula- Chrysler. Leather Grain Cover--ready to install. tion. Molded to fit the stock engine setback hump.

Firewall Insulators can be ordered with out holes for customs and street rods. DeSoto Cars Stop Engine Heat at the Source 1928-1948

Made Right - To Fit Right -- To Stop Engine Heat

1928-48 DeSoto Firewall Insulator Panels The Firewall bulkhead in many of the Post -War Chrysler, Dodge, DeSoto and Plymouth cars was commonly shared across production lines with the addition or deletion of a hole here and there to accomodated brand specific engines and accessory equipment. Compare the images in this section of the catalog with the passenger side of your firewall bulkehead to dtermine which Insulator panel most closely matches the basic hole configu- ration on your vehicle. If the firewall in your vehicle is slightly different than the illustrations you see here, contact our office for assistance.

Firewall Insulator can be ordered for Restoration (factory Holes) or for Restomod (No Holes). 1928-48 DeSoto Firewall Insulator Panels

DESO 2800-C DESO 2830K-C 1928 DeSoto Firewall Insulator Panel 1928-30 DeSoto Model K Firewall Insulator Panel Original Factory Style firewall insulator for the 1928 DeSoto. Original Factory Style firewall insulator for the 1928-30 Leather Grain Cover--ready to install with insulation. DeSoto Model K. Chicken Track Grain Cover--ready to install with insulation. Molded to fit the stock engine setback hump.

DESO 3000CF-C DESO 3000CK-C 1930 DeSoto Model CF Firewall Insulator Panel 1930 DeSoto Model CK Firewall Insulator Panel Original Factory Style firewall insulator for the 1930 DeSoto Original Factory Style firewall insulator for the 1930 DeSoto Model CF. Chicken Track Grain Cover--ready to install with Model CK. Leather Grain Cover--ready to install with insula- insulation. Molded to fit the stock engine setback hump. tion.

DESO 3032CF-C DESO 3100SA-C 1930-32 DeSoto Model CF Firewall Insulator Panel 1931 DeSoto Model SA Firewall Insulator Panel Original Factory Style firewall insulator for the 1930-32 Original Factory Style firewall insulator for the 1931 DeSoto DeSoto Model CF. Chicken Track Grain Cover--ready to in- Model SA Leather Grain Cover--ready to install with insula- stall with insulation. Molded to fit the stock engine setback tion. hump. Firewall Insulators can be ordered with out holes for customs and street rods. 1928-48 DeSoto Firewall Insulator Panels

DESO 3600S1-C DESO 3600S2-C 1936 DeSoto Model S1 Firewall Insulator Panel 1936 DeSoto Model S2 Firewall Insulator Panel Original Factory Style firewall insulator for the 1936 DeSoto Original Factory Style firewall insulator for the 1936 DeSoto Model S1. Chicken Track Grain Cover--ready to install with Model S2. Chicken Track Grain Cover--ready to install with insulation. insulation.

MOPAR 3738-SCB DESO 3800S5-C 1937-38 MOPAR Steering Column Boot 1936 DeSoto Model S5 Firewall Insulator Panel Original Factory Style Steering Column Boot used in 1937- Original Factory Style firewall insulator for the 1938 DeSoto 38 Chrysler, Dodge, DeSoto, and Plymouth cars. Leather Model S5. Chicken Track Grain Cover--ready to install with Grain Cover--ready to install. Black. Easily painted. insulation. Molded to fit the stock engine setback hump.

DESO 4100-C DESO 4248-C 1941 DeSoto Firewall Insulator Panel 1942-48 DeSoto Firewall Insulator Panel Original Factory Style firewall insulator for the 1941 DeSo- Original Factory Style firewall insulator for the 1942-48 to. Leather Grain Cover--ready to install with insulation. DeSoto. Leather Grain Cover--ready to install with insula- Molded to fit the stock engine setback hump. tion. Molded to fit the stock engine setback hump.

Firewall Insulators can be ordered with out holes for customs and street rods. Dodge Cars Stop Engine Heat at the Source 1928-1948

Made Right - To Fit Right -- To Stop Engine Heat

Firewall Insulator can be ordered for Restoration (factory Holes) or for Restomod (No Holes). 1928-48 Dodge Firewall Insulator Panels The Firewall bulkhead in many of the Post -War Chrysler, Dodge, DeSoto and Plymouth cars was commonly shared across production lines with the addition or deletion of a hole here and there to accomodated brand specific engines and accessory equipment. Compare the images in this section of the catalog with the passenger side of your firewall bulkehead to dtermine which Insulator panel most closely matches the basic hole configu- ration on your vehicle. If the firewall in your vehicle is slightly different than the illustrations you see here, contact our office for assistance.

DODGE 2800S6-C 1928 Dodge Model Standard 6 Firewall Insulator Panel Original Factory Style firewall insulator for the 1928 Dodge DODGE 2800S6-CSP Model Standard 6. Leather Grain Cover--ready to install 1928 Dodge Standard 6 Cowl Panel Set with insulation. Molded to fit the stock engine setback Original Factory Style Cowl Panel Set for the 1928 Dodge hump. Standard 6. Leather Grain Cover--ready to install.

DODGE 2800V6-C DODGE 2900V6-C 1928 Dodge Model Victory 6 Firewall Insulator Panel 1929 Dodge Model Victory 6 Firewall Insulator Panel Original Factory Style firewall insulator for the 1928 Dodge Original Factory Style firewall insulator for the 1929 Dodge Model Victory 6. Leather Grain Cover--ready to install with Model Victory 6. Leather Grain Cover--ready to install with insulation. Molded to fit the stock engine setback hump. insulation. Molded to fit the stock engine setback hump.

Firewall Insulators can be ordered with out holes for customs and street rods. 1928-48 Dodge Firewall Insulator Panels

DODGE 2930DA-C DODGE 2930DA-CSP 1929-30 Dodge Model DA Firewall Insulator Panel 1929-30 Dodge Model DA Cowl Panel Set Original Factory Style firewall insulator for the 1929-30 Original Factory Style cowl Panel Set for the 1929-30 Dodge Model DA. Leather Grain Cover--ready to install with Dodge Model DA.. Leather Grain Cover--ready to install. insulation. Molded to fit the stock engine setback hump.

DODGE 3000CF-C DODGE 3000DC68-C 1930 Dodge Model CF Firewall Insulator Panel 1930 Dodge Model DC 6/8 Firewall Insulator Panel Original Factory Style firewall insulator for the 1930 Dodge Original Factory Style firewall insulator for the 1930 Dodge Model CF. Leather Grain Cover--ready to install with insula- Model DC 6 and 8 Cylinder. Leather Grain Cover--ready tion. Molded to fit the stock engine setback hump. to install with insulation. Molded to fit the stock engine setback hump.

DODGE 3300DO-C DODGE 3300DP-C 1933 Dodge Model DO Firewall Insulator Panel 1933 Dodge Model DP Firewall Insulator Panel Original Factory Style firewall insulator for the 1933 Dodge Original Factory Style firewall insulator for the 1933 Dodge Model DO. Leather Grain Cover--ready to install with insula- Model DP. Leather Grain Cover--ready to install with insulation. tion.

Firewall Insulators can be ordered with out holes for customs and street rods. 1928-48 Dodge Firewall Insulator Panels

DODGE 3334DR-C DODGE 3334DS-C 1933-34 Dodge Model DR Firewall Insulator Panel 1933-34 Dodge Model DP Firewall Insulator Panel Original Factory Style firewall insulator for the 1933-34 Original Factory Style firewall insulator for the 1933-34 Dodge Model DR. Leather Grain Cover--ready to install with Dodge Model DS. Leather Grain Cover--ready to install with insulation. insulation.

DODGE 3600D2-C DODGE 3600D2-CSP 1936 Dodge Model D2 Firewall Insulator Panel 1929-30 Dodge Model DA Cowl Panel Set Original Factory Style firewall insulator for the 1936 Dodge Original Factory Style cowl Panel Set for the 1936 Dodge Model D2. Leather Grain Cover--ready to install with insula- Model D2. Leather Grain Cover--ready to install. tion.

DODGE 3700D2-C DODGE 3700D5-C 1937 Dodge Model D2 Firewall Insulator Panel 1937 Dodge Model D5 Firewall Insulator Panel Original Factory Style firewall insulator for the 1937 Dodge Original Factory Style firewall insulator for the 1937 Dodge Model D2. Leather Grain Cover--ready to install with insula- Model D5. Leather Grain Cover--ready to install with insulation. tion.

Firewall Insulators can be ordered with out holes for customs and street rods. 1928-48 Dodge Firewall Insulator Panels

DODGE 3739-CSP DODGE 3739-FDSPKG 1937-39 Dodge Cowl Panel Set 1937-39 Dodge Fourdoor Sedan Package Tray Original Factory Style cowl Panel Set for the 1937-39 Original Factory Style Package Tray for the 1937-39 Dodge Dodge. Leather Grain Cover--ready to install. Four Door Sedan. Leather Grain Cover--ready to install.

DODGE 3739-TDSPKG 1937-39 Dodge Two Door Sedan Package Tray Original Factory Style Package Tray for the 1937-39 Dodge DODGE 3739-FDSSD Two Door Sedan. Leather Grain Cover--ready to install. 1937-39 Dodge Four Door Sedan Seat Divider Original Factory Style Seat Divider for the 1937-39 Dodge Four Door Sedan. Leather Grain Cover--ready to install.

DODGE 3800D4-C 1938 Dodge Model D4 Firewall Insulator Panel DODGE 3739-TDSSD Original Factory Style firewall insulator for the 1938 Dodge 1937-39 Dodge Two Door Sedan Seat Divider Model D4. Leather Grain Cover--ready to install with insula- Original Factory Style Seat Divider for the 1937-39 Dodge tion. Two Door Sedan. Leather Grain Cover--ready to install.

Firewall Insulators can be ordered with out holes for customs and street rods. 1928-48 Dodge Firewall Insulator Panels

DODGE 3800D8-C MOPAR 3738-SCB 1938 Dodge Model D8 Firewall Insulator Panel 1937-38 MOPAR Steering Column Boot Original Factory Style firewall insulator for the 1938 Dodge Original Factory Style Steering Column Boot used in 1937- Model D8. Leather Grain Cover--ready to install with insula- 38 Chrysler, Dodge, DeSoto, and Plymouth cars. Leather tion. Grain Cover--ready to install. Black. Easily painted.

DODGE 3940D10-C 1939-40 Dodge Model D10 Firewall Insulator Panel Original Factory Style firewall insulator for the 1939-40 DODGE 3940D10-CSP Dodge Model D10. Leather Grain Cover--ready to install 1939-40 Dodge D10 Cowl Panel Set with insulation. Molded to fit the stock engine setback Original Factory Style cowl Panel Set for the 1939-40 D10 hump. Dodge. Leather Grain Cover--ready to install.

DODGE 4248-C 1942-48 Dodge Firewall Insulator Panel DODGE 4248-CSP Original Factory Style firewall insulator for the 1942-48 1942-48 Dodge Cowl Panel Set Dodge. Leather Grain Cover--ready to install with insulation. Original Factory Style cowl Panel Set for the 1942-48 Molded to fit the stock engine setback hump. Dodge. Leather Grain Cover--ready to install.

Firewall Insulators can be ordered with out holes for customs and street rods. Plymouth Cars Stop Engine Heat at the Source 1928-1948

Made Right - To Fit Right -- To Stop Engine Heat

Firewall Insulator can be ordered for Restoration (factory Holes) or for Restomod (No Holes). 1931-48 Plymouth Firewall Insulator Panels The Firewall bulkhead in many of the Post -War Chrysler, Dodge, DeSoto and Plymouth cars was commonly shared across production lines with the addition or deletion of a hole here and there to accomodated brand specific engines and accessory equipment. Compare the images in this section of the catalog with the passenger side of your firewall bulkehead to dtermine which Insulator panel most closely matches the basic hole configu- ration on your vehicle. If the firewall in your vehicle is slightly different than the illustrations you see here, contact our office for assistance.

PLY 3100PB-C PLY 3200PA-C 1931 Plymouth Model PB Firewall Insulator Panel 1932 Plymouth Model PA Firewall Insulator Panel Original Factory Style firewall insulator for the 1931 Plym- Original Factory Style firewall insulator for the 1932 Plym- outh Model PB. Leather Grain Cover--ready to install with outh Model PA. Leather Grain Cover--ready to install with insulation. insulation.

PLY 3200PB-C PLY 3334DR-C 1932 Plymouth Model PB Firewall Insulator Panel 1933-34 Plymouth Model DR Firewall Insulator Panel Original Factory Style firewall insulator for the 1932 Plym- Original Factory Style firewall insulator for the 1933-34 outh Model PB. Leather Grain Cover--ready to install with Plymouth Model DR. Leather Grain Cover--ready to install insulation. with insulation.

Firewall Insulators can be ordered with out holes for customs and street rods. 1928-48 Plymouth Firewall Insulator Panels The Firewall bulkhead in many of the Post -War Chrysler, Dodge, DeSoto and Plymouth cars was commonly shared across production lines with the addition or deletion of a hole here and there to accomodated brand specific engines and accessory equipment.

PLY 3334PE-C PLY 3334PF-C 1933-34 Plymouth Model PE Firewall Insulator Panel 1933-34 Plymouth Model PF Firewall Insulator Panel Original Factory Style firewall insulator for the 1933-34 Original Factory Style firewall insulator for the 1933-34 Plymouth Model PFE Leather Grain Cover--ready to install Plymouth Model PF. Leather Grain Cover--ready to install with insulation. with insulation.

PLY 3500PG-CSP PLY 3600P2-C 1935 Plymouth Model PJ Cowl Panel Set 1936 Plymouth Model P2 Firewall Insulator Panel Original Factory Style Cowl Panel Set used in 1935 Plym- Original Factory Style firewall insulator for the 1936 Plym- outh cars. Leather Grain Cover--ready to install. outh Model P2. Leather Grain Cover--ready to install with insulation.

PLY 3700P4-C MOPAR 3738-SCB 1937 Plymouth Model P4 Firewall Insulator Panel 1937-38 MOPAR Steering Column Boot Original Factory Style firewall insulator for the 1937 Plym- Original Factory Style Steering Column Boot used in 1937- outh Model P4. Leather Grain Cover--ready to install with 38 Chrysler, Dodge, DeSoto, and Plymouth cars. Leather insulation. Grain Cover--ready to install. Black. easily painted.

PLY 3900P7-C PLY 3900P8-C 1939 Plymouth Model P7 Firewall Insulator Panel 1939 Plymouth Model P8 Firewall Insulator Panel Original Factory Style firewall insulator for the 1939 Plym- Original Factory Style firewall insulator for the 1939 Plym- outh Model P7. Leather Grain Cover--ready to install with outh Model P8. Leather Grain Cover--ready to install with insulation. Molded to fit the stock engine setback hump. insulation. Molded to fit the stock engine setback hump.

PLY 4041P10-C 1940-41 Plymouth Model P10 Firewall Insulator Panel Original Factory Style firewall insulator for the 1940-41 Plymouth Model P10. Leather Grain Cover--ready to install with insulation. Molded to fit the stock engine setback hump.

Firewall Insulators can be ordered with out holes for customs and street rods. 1942-48 Plymouth Firewall Insulator Panels The Firewall bulkhead in many of the Post -War Chrysler, Dodge, DeSoto and Plymouth cars was commonly shared across production lines with the addition or deletion of a hole here and there to accomodated brand specific engines and accessory equipment.

PLY 4248P15-C PLY 4248-P15-CSP 1942-48 Plymouth Model P15Firewall Insulator Panel 1942-48 Plymouth Model PJ15 Cowl Panel Set Original Factory Style firewall insulator for the 1942-48 Original Factory Style Cowl Panel Set used in 1942-48 Plymouth Model P15. Leather Grain Cover--ready to install Plymouth cars. Leather Grain Cover--ready to install. with insulation. Molded to fit the stock engine setback hump.

PLY 4248-P15-CSD PLY 4248-P15-CPKG 1942-48 Plymouth Model PJ15 Coupe Seat Divider Panel. 1942-48 Plymouth Model PJ15 Coupe Package Tray Panel. Original Factory Style Soupe Seat Divider Panel used in Original Factory Style Package Tray Panel used in 1942-48 1942-48 Plymouth cars. Leather Grain Cover--ready to Plymouth cars. Leather Grain Cover--ready to install. install.

Firewall Insulators can be ordered with out holes for customs and street rods. Automotive Thermal Acoustic Insulation

A Roof to Road Solution to Control Passenger Cabin Noise, Vibration and Heat TM AcoustiSHIELD Product Description AcoustiShield is a two-stage thermal acoustic automotive insulation product designed to control Noise, Vibration and Heat—the three major issues that affect passenger cabin comfort. Kits include pre-cut, ready-to-install Dynamat Xtreme® damper pads and HeatShield Barrier Insulation panels which are packaged separately for easy installation. Kits come with uniquely illustrated installation sheets, spray adhesive and seam tape. Complete Acoustic Kits insulate the Cowl, Floor, Roof, Trunk Floor, Doors and Body Panels, which includes the seat divider, package tray and rear wheel wells. The installation of a complete AcoustiShield kit typically will reduce passenger cabin noise by 12 to 17 decibels. To put this in perspective, a 10-decibel reduction is a 50 percent reduction in noise that the human ear can easily detect. Barrier insulation will reduce radiant heat by as much as 25 degrees. AcoustiShield is a Two-Stage Process Stage-One of the AcoustiShield process is the application of small pre-cut Dynamat Xtreme® damper pads and strips to auto body sheet metal to greatly reduce the vibration and noise produced by these panels from entering the passenger cabin.

Stage-Two of the AcoustiShield process is the application of pre-cut HeatShield Barrier Insulation panels to the auto body sheet metal to encapsulate any remaining vibration/noise and to thermally insulate the vehicle. ©2003-21 Quiet Ride Solutions LLC. “AcoustiSHIELD” --- “Quiet Ride Solutions” “AcoustiTRUNK”---”ShowBEDDER”---”AcousatiHOOD”are Registered Trade Marks of Quiet Ride Solutions LLC. Expanded NVH Reference Information: Cars and trucks make and/or absorb noise, vibration and heat (NVH) from multiple directions--including internal and external air-borne noise, structure-borne noise as well as radiant heat. NVH factors to consider: •Engine NVH travels back from the front of the vehicle through the firewall and cowl. •Wheel well trunk and rear body panel NVH travels forward through the seat divider and package tray panels. •Roadway radiant heat, often exceeding 140 degrees, rises through vehicle floor pans. •Rumbling performance exhaust systems and transmission/drive line harmonics also rise through vehicle floor pans. •Direct heat from the sun penetrates the roof of the vehicle.

All of these influences “Apex” in the middle of the passenger cabin at ear level. Add the noise produced by the sound system; the air rushing through the vents from the HVAC system; and a normal conversation builds into a “shouting match” between the driver and passenger to overcome the “harmonic drone” of vehicle mechanics. AcoustiShield Photo Gallery

Typical Cowl Panel Sound Dampening and Thermal Barrier Insulation.

Typical Trunk Floor Sound Dampening and Thermal Barrier Insulation. Typical Floor Panel Sound Dampening and Thermal Barrier Insulation.

Typical Roof Panel Sound Dampening and Thermal Barrier Insulation.

Typical Body Panel Sound Dampening and Thermal Barrier Insulation. Made Right---Fit Right---Look Right OEM Original Products

Firewall Insulator products are pre-cut and ready to install with standard OEM accessory and mounting holes punched for restoration applications. Each unit has period correct insulation. Firewall Insulators are also available without holes for aftermarket HVAC systems and ABS Leather Grain Material Street Rod and Custom installs.

“Ultra High Definition” Vinyl Rubber Street Rod Firewall Insulator Direct Sheetmetal Absolute Sheetmetal Quick Link

ABS “Chicken Track” Material Product Description— ABS “Leather Grain” Original Equipment Firewall Insulators

Production Period—GM and MOPAR: 1926 through 1976 Production Period—FOMOCO: 1949 through 1979 ABS Firewall Cover Leather Grain Material Most OEMs used a leather grained firewall cover on their cars and trucks from 1926 through 1965. Each insulator product is molded with ABS material and ready-to- install with factory stock accessory holes and mounting pin locations punched. Kits does not include mounting pins. Quiet Ride has an assortment Each insulator product is of “universal” mounting pin styles molded from an “out of the car” available as needed. original firewall for contour and accuracy. Mounting pins are not included but Year-Make-Model Specific. are available for separate purchase as needed.

Firewall Insulators can be ordered without holes for custom applications. Thermal Insulation Types Original Equipment Firewall Insulators •General Motors Cars and Trucks •Ford Cars and Trucks •MOPAR Cars and Trucks

Black Fiberglass Insulation Heat Shield Barrier Insulation Typically used in vehicles 1949 through 1977 Typically used in vehicles 1928-48 and •ABS Firewall Insulators Vinyl Rubber Firewalls 1964-present •Street Rods •Custom Firewalls

Concours Show Quality Authentically Correct---“Fit like a Glove”---Easy to Install

All QRS Products, Materials and Craftsmanship Meet or Exceed OEM Quality Standards

No customer has ever reported losing judged points on our firewall products. Firewall Insulators--A Historical Perspective The Firewall Insulator is the first line of defense against automotive Noise, Vibration and Heat that is generated in the engine bay of the vehicle. QRS manufactures more than 600 firewall products for antique, classic, custom and street rod cars and trucks. The company has developed these products based on “out of car” original insulator pads that have been supplied by its customers. QuietRide Firewalls Insulators are exact reproductions of OEM products. Most firewall insulators made between 1928 and the mid-1960s were constructed with an oil impregnated cardboard cover in combination with a number of insulation materials. In 1964 General Motors and Ford Motor Company began using a “spray-on” rubber material bonded to a thin layer of “shody” insulation. All of the company’s firewall products are vacuum form molded to fit the firewall and transmission contours exactly. They are digitized and manufactured on its Flow Water Jet Cutting System for accurate fitting. Each firewall cover is backed with period correct insulation which could include a black fiberglass or HeatShield barrier insulation. Firewall Colors and “Sheen” Just a word about the “look” of your old firewall in comparison to a new one--you may may note that the new firewall does not look the same as your original--because of the “sheen.” The firewall insulator in a car built in the 1930s or 40s is now at least 70-80 years old and is dirty and dingy. When the vehicle came off the assembly line, all of its component parts were crisp, clean and sparkling fresh. With few exceptions, firewall insulators were black when they came from the factory. There were some exceptions in the General Motors product line from 1933 through 1941 in which the firewall insulators were a “mocha brown” color. The firewall color would typically match the color of your clutch, brake and accelerator pedal rubber pads.

1122 S. Wilson Way Ste. #1, Stockton CA, 95205 Order Line: 888-777-3410 Tech Line (209) 942-4777 Fax 877-720-2360

©2003-21 Quiet Ride Solutions LLC. “AcoustiSHIELD” --- “Quiet Ride Solutions” “AcoustiTRUNK”---”ShowBEDDER”---”AcousatiHOOD”are Registered Trade Marks of Quiet Ride Solutions LLC. Mounting Pins and Clips

American Cars and Trucks used a wide variety of mounting pins, clips, buttons and screws to attach the firewall insulator to the interior of the steel firewall bulkhead. Clean up and reuse your original mounting pins if you have them. We offer the following mounting pins and information based on what we have been able to find available. UMPS-10 Universal Mounting Pins 20 If your original firewall mounting pins are missing or damaged beyond repair, these universal pins may be a solution. They are a plastic “Christmas tree” type pin with a 1/2” button “head” that will fit most 5/16 inch holes. Kit includes 10 pins.

UWC-MPL-10 Universal Wire Cap Mounting Pin--Long 10 A variety of car and truck manufacturers in the 1930s-40s-50s used a wire cap retainer to mount the firewall insulator. Long shank (1/2 inch) with a 1/2 inch button “head” that can be painted to match the firewall color. Kit includes 10 Pins.

UWC-MPS-10 Universal Wire Cap Mounting Pin--Short 10 A variety of car and truck manufacturers in the 1930s-40s-50s used a wire cap retainer to mount the firewall insulator. Short shank (1/4 inch) with a 1/2 inch button “head” that can be painted to match the firewall color. Kit includes 10 Pins.

UPPS-20 Universal Upholstery Panel Pin Set 30 If your original upholstery panel mounting pins are missing or damaged beyond repair, these universal pins may be a solution. They are a short-shank plastic “Christmas tree” type pin with a 1/2 inch “head” that will fit 5/16 inch holes. Kit includes 10 pins.

FORD 3541- Early Ford Firewall Mounting Pins--Long 3 MPL These all steel firewall mounting pins are an exact reproduction of the originals. They are in a 3/4 inch in length. The Long pin works best in the 1935-41 cars and may be used on cars through the mid-fiftys.

FORD 3541- Early Ford Firewall Mounting Pin--Short 3 MPS These all steel firewall mounting pins are an exact reproduction of the originals. They are in a 1/2 inch in length. The short pins work best for the 1942-48 Ford cars and 1940-47 Ford trucks and may be used on trucks through the mid-fiftys.

FORD RB-MP Late Model Ford Firewall Mounting Pins--Rubber Bullet Style 3 These all Rubber Bullet Style Ford mounting pins were used on FOMOCO products starting in 1969. These are an exact reproduction of the original.

GM 5500-MP GM Firewall Plastic Firewall Mounting Plugs 3 General Motors started using a plastic firewall mounting plug to attach the insulator to the steel firewall bulkhead in 1955 for trucks and 1957 for cars. These plugs are still used in many GM vehicles today.

SRMP-9 Street Rod Mounting Pin Kit 34 With this new mounting pin kit, you can smooth your firewall by welding closed the firewall mounting holes and install any of our insulator panels for that “smoothie look.” This kit will give you the option to place the firewall mounting pins where they will fit your application best. Be sure to order your firewall insulator “No Holes” when you place your order. Kit Includes 9 pinsets and instructions.

R-83-56 Early and Mid-Year 1932 Ford 14.95 Correct insulator panel to dash mounting screws for early and mid-year 1932 passenger car, wagon and sedan delivery. Per Ford Engineering release documents, the correct slotted flat head screws (1/4-20 x 1 3/16), locks, hex nuts and cup washers. Finished in black oxide. Kit includes 12 Sets (48 pieces.) Please Order directly from Roy Nacewicz Enterprises, www.fordbolts.com.

R-07-01 Ford Original Shoulder Bolts for mid-to-late 1932 through 1935 Cars/Trucks 5.95 Ford special slotted truss head shoulder screw, painted in Ford S-2 finish. Period correct insulator panel to dash Truss head/Shoulder mounting bolts for mid- to-late 1932-35 car, wagon and sedan delivery. Per Ford Engineering release documents. Kit includes one Shoulder screw, 1/4 lock and 1/4-20 hex nut. FYI: 12 required for 1932 Vehicles and 14 required for 1933-35 vehicles. Please Order directly from Roy Nacewicz Enterprises, www.fordbolts.com.