DOCSLIB.ORG

Declaser 1100 Printer Operator's Guide

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Declaser 1100 Printer Operator's Guide DEClaser 1100 Printer Operator’s Guide Order Number EK–DCL11–OP–002 Digital Equipment Corporation Maynard, Massachusetts First Printing, January 1991 Revised, June 1991 The information in this document is subject to change without notice and should not be construed as a commitment by Digital Equipment Corporation. Digital Equipment Corporation assumes no responsibility for any errors that may appear in this document. Any software described in this document is furnished under a license and may be used or copied only in accordance with the terms of such license. No responsibility is assumed for the use or reliability of software or equipment that is not supplied by Digital Equipment Corporation or its affiliated companies. Restricted Rights: Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227–7013. © Digital Equipment Corporation 1991 All rights reserved. Printed in U.S.A. The Reader’s Comments form at the end of this document requests your critical evaluation to assist in preparing future documentation. The following are trademarks of Digital Equipment Corporation: DECdirect, DEClaser, DECmailer, DECmate, DECservice, LN03, LN03 PLUS, VAX DOCUMENT, and the DIGITAL logo. IBM is a registered trademark of International Business Machines Corporation and ProPrinter is a trademark of International Business Machines Corporation. PostScript is a registered trademark of Adobe Systems, Inc. HP and LaserJet are registered trademarks of Hewlett- Packard Company. Microsoft is a registered trademark of Microsoft Corporation. WordPerfect is a trademark of WordPerfect Corporation. S1703 This document was prepared using VAX DOCUMENT, Version 1.2. First Printing, January 1991 Revised, June 1991 The information in this document is subject to change without notice and should not be construed as a commitment by Digital Equipment Corporation. Digital Equipment Corporation assumes no responsibility for any errors that may appear in this document. Any software described in this document is furnished under a license and may be used or copied only in accordance with the terms of such license. No responsibility is assumed for the use or reliability of software or equipment that is not supplied by Digital Equipment Corporation or its affiliated companies. Restricted Rights: Use, duplication, or disclosure by the U.S. Government is subject to restrictions as set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227–7013. © Digital Equipment Corporation 1991 All rights reserved. Printed in Japan. The Reader’s Comments form at the end of this document requests your critical evaluation to assist in preparing future documentation. The following are trademarks of Digital Equipment Corporation: DECdirect, DEClaser, DECmailer, DECmate, DECservice, LN03, LN03 PLUS, VAX DOCUMENT, and the DIGITAL logo. IBM is a registered trademark of International Business Machines Corporation and ProPrinter is a trademark of International Business Machines Corporation. PostScript is a registered trademark of Adobe Systems, Inc. HP and LaserJet are registered trademarks of Hewlett- Packard Company. Microsoft is a registered trademark of Microsoft Corporation. WordPerfect is a trademark of WordPerfect Corporation. S1703 This document was prepared using VAX DOCUMENT, Version 1.2. FCC NOTICE: This equipment generates and uses radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio and television reception. It has been type tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following methods. – Reorient the receiving antenna. – Relocate the computer or peripheral with respect to the receiver. – Move the computer or peripheral away from the receiver. – Plug the computer or peripheral into a different outlet so that they are on different branch circuits than the receiver. If necessary, the user should consult the dealer or an experienced radio/television technician for additional suggestions. The user may find the booklet How to Identify and Resolve Radio/TV Interference Problems, prepared by the Federal Communications Commission helpful. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004–000–00345–4. To meet FCC requirements a shielded parallel cable is required to connect the device to a personal computer or other Class B device. 4 Contents Preface ix Chapter 1 Printer Components 1.1 Functions of the Printer Components .................. 1–1 1.2 Required Operating Space ........................... 1–9 Chapter 2 Operating Information 2.1 Powering the Printer On ............................ 2–1 2.2 Powering the Printer Off ............................ 2–3 2.3 Opening the Paper Tray ............................. 2–4 2.4 Adding Paper ..................................... 2–6 2.4.1 Loading the Paper Tray ........................... 2–7 2.5 Changing the Page Format Size . ...................... 2–11 2.6 Printing on Envelopes .............................. 2–12 2.6.1 Loading Envelopes . .............................. 2–12 2.7 Selecting the Output Tray ........................... 2–18 2.7.1 Selecting the Top Output Tray (Facedown Print) . ..... 2–20 2.7.2 Selecting the Front Output Tray (Faceup Print) . ..... 2–22 2.8 Adjusting the Print Density.......................... 2–24 2.9 Printing Test Print A . .............................. 2–27 2.10 Printing Test Print B . .............................. 2–30 2.11 Printing the Font List .............................. 2–32 2.12 Using Control Representation Mode ................... 2–34 2.12.1 Entering Control Representation Mode . ............. 2–35 2.13 Resetting the Printer . .............................. 2–36 2.14 Emulation and Video Modes of Operation . ............. 2–37 iii Chapter 3 The Control Panel 3.1 Using the Keypad in Keypad Mode .................... 3–5 3.1.1 Entering Keypad Mode ........................... 3–5 3.2 Using the Keypad in Menu Mode ...................... 3–8 Chapter 4 Printer Configuration 4.1 Entering Menu Mode . .............................. 4–2 4.1.1 Keypad Functions in Menu Mode .................... 4–3 4.2 Reading the Display in Menu Mode .................... 4–4 4.2.1 Displaying Menu and Feature Selections . ............. 4–5 4.2.2 Displaying Menu Values .......................... 4–6 4.3 Printer Configuration Memory . ...................... 4–6 4.3.1 Operating Memory . .............................. 4–7 4.3.2 ROM (Read-Only Memory) . ...................... 4–8 4.3.3 NVRAM (Nonvolatile Random-Access Memory) ......... 4–9 4.3.4 RAM (Random-Access Memory) ..................... 4–10 4.4 Operational Flow in Menu Mode ...................... 4–10 4.4.1 Changing and Saving Values Example Procedure . ..... 4–12 4.5 Menu Descriptions . .............................. 4–14 4.5.1 FEEDER Menu . .............................. 4–16 4.5.2 LAYOUT Menu . .............................. 4–16 4.5.3 COPY Menu .................................... 4–17 4.5.4 COMMAND Menu . .............................. 4–17 4.5.5 INITIAL Menu .................................. 4–18 4.5.5.1 Macro . ...................................... 4–19 4.5.5.2 Examples Using the Macro Feature . ............. 4–21 4.5.5.3 Paint Mode (paint) ............................. 4–22 4.5.5.4 Paper Size (paper) ............................. 4–22 4.5.6 INTERFACE Menu .............................. 4–23 4.5.6.1 Interface Selection (i/f) .......................... 4–25 4.5.6.2 Baud Rate (baud) .............................. 4–25 4.5.6.3 RS232C Data Format (rsmode) ................... 4–25 4.5.6.4 Data Terminal Ready (dtr) . ...................... 4–25 4.5.6.5 Buffer Control (xon/xoff) . ...................... 4–26 4.5.6.6 End of Text/Acknowledge (etx/ack) ................. 4–26 iv Chapter 5 Print Media 5.1 Paper Specifications . .............................. 5–2 5.1.1 Special Considerations When Printing on Paper . ..... 5–3 5.2 Envelope Specifications ............................. 5–4 5.2.1 Special Considerations When Printing on Envelopes ..... 5–7 5.3 Transparency Specifications .......................... 5–8 5.3.1 Special Considerations When Printing on Transparencies . 5–8 5.4 Label Specifications . .............................. 5–9 5.4.1 Special Considerations When Printing on Labels . ..... 5–10 5.5 Paper Handling and Storage . ...................... 5–10 5.5.1 Paper Handling . .............................. 5–11 5.5.2 Paper Storage .................................. 5–11 Chapter 6 Troubleshooting 6.1 Error Skip Procedure . .............................. 6–2 6.2 Printer Status Messages ............................ 6–3 6.3 Operator Call Messages ............................. 6–4 6.4 Software Error Messages ............................ 6–6 6.5 Service Call Messages .............................. 6–8 6.6 Common
Load more

Recommended publications
  • SUPPORTING the CHINESE, JAPANESE, and KOREAN LANGUAGES in the OPENVMS OPERATING SYSTEM by Michael M. T. Yau ABSTRACT the Asian L
    SUPPORTING THE CHINESE, JAPANESE, AND KOREAN LANGUAGES IN THE OPENVMS OPERATING SYSTEM By Michael M. T. Yau ABSTRACT The Asian language versions of the OpenVMS operating system allow Asian-speaking users to interact with the OpenVMS system in their native languages and provide a platform for developing Asian applications. Since the OpenVMS variants must be able to handle multibyte character sets, the requirements for the internal representation, input, and output differ considerably from those for the standard English version. A review of the Japanese, Chinese, and Korean writing systems and character set standards provides the context for a discussion of the features of the Asian OpenVMS variants. The localization approach adopted in developing these Asian variants was shaped by business and engineering constraints; issues related to this approach are presented. INTRODUCTION The OpenVMS operating system was designed in an era when English was the only language supported in computer systems. The Digital Command Language (DCL) commands and utilities, system help and message texts, run-time libraries and system services, and names of system objects such as file names and user names all assume English text encoded in the 7-bit American Standard Code for Information Interchange (ASCII) character set. As Digital's business began to expand into markets where common end users are non-English speaking, the requirement for the OpenVMS system to support languages other than English became inevitable. In contrast to the migration to support single-byte, 8-bit European characters, OpenVMS localization efforts to support the Asian languages, namely Japanese, Chinese, and Korean, must deal with a more complex issue, i.e., the handling of multibyte character sets.
    [Show full text]
  • L2/98-354 Terminal Graphics for Unicode
    L2/98-354 TERMINAL GRAPHICS FOR UNICODE Frank da Cruz The Kermit Project Columbia University New York City USA [email protected] http://www.columbia.edu/kermit/ D R A F T # 4 Tue Nov 3 19:08:58 1998 THIS IS A PREFORMATTED PLAIN-TEXT ASCII DOCUMENT. IT IS DESIGNED TO BE VIEWED AS-IS IN A FIXED-PITCH FONT. ITS WIDEST LINE IS 79 COLUMNS. IT CONTAINS NO TABS. IF IT LOOKS MESSY TO YOU, PLEASE FEEL FREE TO PICK UP A CLEAN COPY OF THIS OR THE RELATED PROPOSALS BY ANONYMOUS FTP: HEX BYTE PICTURES FOR UNICODE (plain text) ftp://kermit.columbia.edu/kermit/ucsterminal/hex.txt ADDITIONAL CONTROL PICTURES FOR UNICODE (plain text) ftp://kermit.columbia.edu/kermit/ucsterminal/control.txt TERMINAL GRAPHICS FOR UNICODE (plain text) ftp://kermit.columbia.edu/kermit/ucsterminal/ucsterminal.txt Glyph Map (PDF, contributed by Michael Everson) ftp://kermit.columbia.edu/kermit/ucsterminal/terminal-emulation.pdf Clarification of SNI Glyphs (Microsoft Word 7.0) ftp://kermit.columbia.edu/kermit/ucsterminal/sni-charsets.doc Discussion (plain text) ftp://kermit.columbia.edu/kermit/ucsterminal/mail.txt (Note, the Exhibits are on paper and not available at the FTP site.) ABSTRACT A selection of terminal graphics characters is proposed for Unicode [24] and ISO 10646 [19] to allow Unicode-based terminal emulation software to display glyphs that are found on popular types of terminals but currently are not available in Unicode, and to exchange these characters with other Unicode-based applications. 1 CONTENTS 1. Introduction 2. Scope 3. Organization 4. (deleted) 5. 3270 Terminal Operator Status Indicators 6.
    [Show full text]
  • Hp700/S0 Hp700/S0es User's Manual
    HP700/S0 HP700/S0ES USER'S MANUAL F/iiiW HEWLETT ~e.. PACKARD HP 700/60 and HP 700/60ES User's Manual r/i;- HEWLETT a!~ PACKARD HP Part No. C1080·90009 Printed in Singapore 3nd Edition, March, 1992 Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. The VT320, VT100 and VT52 are products of Digital Equipment Corporation. The IBM PCI AT2 is a product of International Business Machines Corporation. The WY-60 is a product of Wyse Technology. DEC is a registered trademark of Digital Equipment Corporation. Hewlett-Packard Company CSY Roseville Terminals Division 8000 Foothills Boulevard Roseville, California, 95678-6502 © Copyright 1992 Hewlett-Packard Company Warranty Information This terminal is warranted by Hewlett-Packard against defects in materials and workmanship for one year from date of original purchase. If you transfer ownership, this warranty is automatically transferred to the new owner and remains in effect for the original one year period. During the warranty period we will repair or, at our option, replace at no charge any unit that proves to be defective, provided it is returned, shipping prepaid, to an identified Hewlett-Packard repair facility. You are responsible for all customs duties in connection with the return of the unit.
    [Show full text]
  • TE 2000Tvt/ANSI Terminal Emulation Programmer's Guide
    Programmer's Guide TE 2000t VT/ANSI Terminal Emulation Intermec Technologies Corporation Corporate Headquarters Technical Communications Department 6001 36th Ave. W. 550 Second Street SE Everett, WA 98203 Cedar Rapids, IA 52401 U.S.A. U.S.A. www.intermec.com The information contained herein is proprietary and is provided solely for the purpose of allowing customers to operate and service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose without written permission of Intermec. Information and specifications contained in this document are subject to change without prior notice and do not represent a commitment on the part of Intermec Technologies Corporation. E 1999-2005 by Intermec Technologies Corporation. All rights reserved. The word Intermec, the Intermec logo, Norand, ArciTech, CrossBar, Data Collection Browser, dcBrowser, Duratherm, EasyCoder, EasyLAN, Enterprise Wireless LAN, EZBuilder, Fingerprint, i-gistics, INCA (under license), InterDriver, Intermec Printer Network Manager, IRL, JANUS, LabelShop, Mobile Framework, MobileLAN, Nor*Ware, Pen*Key, Precision Print, PrintSet, RoutePower, TE 2000, Trakker Antares, UAP, Universal Access Point, and Virtual Wedge are either trademarks or registered trademarks of Intermec Technologies Corporation. Throughout this manual, trademarked names may be used. Rather than put a trademark (™ or ®) symbol in every occurrence of a trademarked name, we state that we are using the names only in an editorial fashion, and to the benefit of the trademark owner, with no intention of infringement. There are U.S. and foreign patents pending. Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and/or other countries.
    [Show full text]
  • VT420 Programmer Reference Manual Order Number EK–VT420–RM.002
    VT420 Programmer Reference Manual Order Number EK–VT420–RM.002 Digital Equipment Corporation First Edition, November 1989 Second Edition, February 1992 The information in this document is subject to change without notice and should not be construed as a commitment by Digital Equipment Corporation. Digital Equipment Corporation assumes no responsibility for any errors that may appear in this document. The software described in this document is furnished under a license and may be used or copied only in accordance with the terms of such license. No responsibility is assumed for the use or reliability of software on equipment that is not supplied by Digital Equipment Corporation or its affiliated companies. Restricted Rights: Use, duplication, or disclosure by the U. S. Government is subject to restrictions as set forth in subparagraph ( c ) ( 1 ) ( ii ) of the Rights in Technical Data and Computer Software clause at DFARS 252.227–7013. Copyright © Digital Equipment Corporation 1989, 1992 All Rights Reserved. Printed in U.S.A. The following are trademarks of Digital Equipment Corporation: DEC, DEClaser, DECnet, DECserver, LA, LA50, LA75 Companion, LA324, LN01, LN03, LQP02, Scholar, SSU, VMS, VT, VT52, VT100, VT220, VT320, and VT420. AT&T is a registered trademark of American Telephone and Telegraph Company. IBM is a registered trademark of International Business Machines Corporation. This document was prepared and published by Educational Services Development and Publishing, Digital Equipment Corporation. Contents About This Manual xvii Part 1 Introduction to Your VT420 Terminal 1 VT420 Features VT420 Models . ........................................ 3 Keyboards . ........................................ 4 New Features . ........................................ 6 PC TERM Mode ...................................... 6 Two Sessions ........................................ 6 User Windows ......................................
    [Show full text]
  • Tru64 UNIX Technical Reference for Using Korean Features
    Tru64 UNIX Technical Reference for Using Korean Features September 2002 This manual provides the information on the use of the Korean-specific features supported on the Tru64 UNIX operating system. Product Version: Tru64 UNIX Version 5.1B or higher Hewlett-Packard Company Palo Alto, California © 2002 Hewlett-Packard Company Microsoft®, Windows®, and Windows NT® are trademarks of Microsoft Corporation in the U.S. and/or other countries. Motif®, OSF/1®, UNIX®, and X/Open® are trademarks of The Open Group in the U.S. and/or other countries. All other product names mentioned herein may be the trademarks of their respective companies. Confidential computer software. Valid license from Compaq Computer Corporation, a wholly owned subsidiary of Hewlett-Packard Company, required for possession, use, or copying. Consistent with FAR 12.211 and 12.212, Commercial Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. None of Compaq, HP, or any of their subsidiaries shall be liable for technical or editorial errors or omissions contained herein. The information in this publication is provided "as is" without warranty of any kind and is subject to change without notice. The warranties for Compaq products are set forth in the express limited warranty statements accompanying such products. Nothing herein should be construed as constituting an additional warranty. Table of Contents About This Manual 1 Character Sets...........................................................................................
    [Show full text]
  • Administrator's Manual
    Administrator’s Manual Administrator’s Manual PTX-S809 Tables of Contents Printronix Products Information ____________________________________________________________ 1 Safety and environmental notices ___________________________________________________________ 2 Safety notices ___________________________________________________________________________ 2 Danger hazard level ______________________________________________________________________ 2 Caution hazard level _____________________________________________________________________ 2 Attention notices ________________________________________________________________________ 2 Safety precautions _______________________________________________________________________ 3 Electrical safety __________________________________________________________________________ 3 Approved power cord and receptacle ________________________________________________________ 3 Electrical safety and portable power strip receptacles ___________________________________________ 4 Connecting or disconnecting a communication port, a teleport, or an attachment connector ___________ 4 Servicing during an electrical storm _________________________________________________________ 4 FFC Notes_______________________________________________________________________________ 5 European Union (EU) Conformity Statement __________________________________________________ 5 Industry Canada Compliance Statement ______________________________________________________ 5 Statement for CISPR 22 Edition 2 Compliance __________________________________________________
    [Show full text]
  • COPYRIT.CHP:Corel VENTURA
    MS320 for Windows 2.00.121 MiniSoft, Inc. MiniSoft Marketing AG 1024 First street Papiermuhleweg 1 Snohomish, WA 98290 Postfach 107 U.S.A. Ch-6048 Horw Switzerland 1-800-682-0200 Phone: +41-41-340 23 20 360-568-6602 Fax: +41-41-340 38 66 Fax: 360-568-2923 CompuServe: 100046,450 [email protected] Internet access: [email protected] [email protected] httpL//www.minisoft.com ftp://ftp.minisoft.com Disclaimer The information contained in this document is subject to change without notice. MiniSoft, Inc. makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. MiniSoft, Inc. or its agents shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishings, performance, or use of this material. This document contains proprietary information which is protected by copyright. All rights are reserved. No part of this document may be photocopied, repro- duced, or translated to another programming language without the prior written consent of MiniSoft, Inc. ©1991 by MiniSoft, Inc. © DCSi All product names and services identified in this document are trademarks or registered trademarks of their respective companies and are used throughout this document in editorial fashion only and are not intended to convey an endorse- ment or other affiliation with MiniSoft, Inc. License Agreement In return for payment of a onetime fee for this software product, the Customer receives from MiniSoft, Inc. a license to use the product subject to the following terms and conditions: • The product may be used on one computer system at a time: i.e., its use is not limited to a particular machine or user but to one machine at a time.
    [Show full text]
  • Technická Příručka
    ArcTel Technická příručka © Tomáš Vaněk, 1996 - 2021 Revidováno: 6. 9. 2021 Technická příručka je nedílnou součástí programového produktu ArcTel a je spolu s ním chráněna dle autorského zákona. Kopírování a tisk příručky je dovolen pro vlastní potřebu uživatelům programového produktu ArcTel. Jiné využití, zejména citace v jiném díle, není bez písemného svolení autora dovoleno. MS-DOS a Windows jsou chráněné značky firmy Microsoft, UNIX je chráněná značka X/Open konsorcia. Ostatní produkty zmiňované v této příručce jsou chráněny právy odpovídajících vlastníků. Obsah Úvodem.....................................................................................................................................................4 Instalace programem SETUP.EXE...........................................................................................................5 Typy licencí............................................................................................................................................5 Instalace pomocí FTP...........................................................................................................................6 Instalace na sdílený síťový disk.............................................................................................................6 Parametry programu SETUP................................................................................................................7 Soubor informací pro instalaci SETUP.INF...............................................................................................8
    [Show full text]
  • VGB20/VGB25 Video Terminal Programmer Information
    VGB20/VGB25 Video Terminal Programmer Information Order Number: EK-VGB20-RM. A01 July 1994 Digital Equipment Corporation makes no representations that the use of its products in the manner described in this publication will not infringe on existing or future patent rights, nor do the descriptions contained in this publication imply the granting of licenses to make, use, or sell equipment or software in accordance with the description. ADDS is a trademark of Applied Digital Data Systems, Inc. DEC and VT are trademarks of Digital Equipment Corporation. IBM, ProPrinter, and PS/2 are registered trademarks of International Business Machines Corporation. MS–DOS is a registered trademark and Windows is a trademark of Microsoft Corporation. SCO is a trademark of Santa Cruz Operations, Inc. TVI is a trademark of TeleVideo, Inc. UNIX is a registered trademark of UNIX System Laboratories, Inc. WY and WYSE are registered trademarks of Wyse Technologies. All other trademarks and registered trademarks are the property of their respective holders. The Energy Star emblem does not represent EPA endoresement of any product or service. Copyright © Digital Equipment Corporation 1994. All Rights Reserved. Printed in U.S.A. For copies of manuals, contact your local sales office. Preface Introduction This manual provides detailed information for advanced users, consultants, and programmers. This manual has the following parts, chapters, and appendices: • Part I, VGB20 Video Terminal • Chapter 1, Overview • Chapter 2, Set-Up • Chapter 3, Desktop Features • Part
    [Show full text]
  • Edition ISO/IEC WD 10646 1
    SC2/WG2 N2578 ISO/IEC International Standard st Working Draft International Standard 10646 1 Edition st ISO/IEC WD 10646 1 Edition 2003-02-13 Information technology — Universal Multiple-Octet Coded Character Set (UCS) — Architecture and Basic Multilingual Plane Supplementary Planes Working Draft ISO/IEC 10646:2003 (E) Reserved for final ISO Copyright statement ii © ISO/IEC 2003 – All rights reserved Working Draft ISO/IEC 10646:2003 (E) Contents Page 1 Scope .................................................................................................................1 2 Conformance......................................................................................................1 3 Normative references.........................................................................................2 4 Terms and definitions.........................................................................................2 5 General structure of the UCS.............................................................................4 6 Basic structure and nomenclature......................................................................5 7 General requirements for the UCS.....................................................................9 8 The Basic Multilingual Plane ..............................................................................9 9 Supplementary planes.....................................................................................10 10 Private use groups, planes, and zones ............................................................10
    [Show full text]
  • Programmer's Manual
    9060-LA 9070-LA PPrrooggrraammmmeerr’’ss MMaannuuaall 001 Table of Contents Table of Contents................................................... ii Generic Character Set Tables..........................................61 IBM Character Set Tables ...............................................71 DEC PPL2 Quick Reference .................................. 1 IBM Character Set 1 ....................................................71 IBM Character Set 2 ....................................................72 IBM Proprinter Quick Reference......................... 28 EPSON Character Set Tables..........................................73 EPSON ESC/P2 Quick Reference ....................... 36 Retrieving Access to Configuration....................82 Character Sets...................................................... 46 DEC Character Set Tables ...............................................46 DEC PPL2 Quick Reference This section contains basic information on the DEC PPL2 commands supported in the Compuprint 9060-LA and 9070-LA printers. The commands are listed by function, in the following order: – Positioning Controls and Tabs – Sheet size and margins – Type size and spacing, managing implicit cursor motion – Font management and attribute selection – Selecting character sets – Reports – Miscellaneous – Barcode printing – Graphics This guide is intended for use in conjunction with the Digital Ansi-compliant Printing Protocol Level 2 Programming Reference Manual and the Digital Ansi-compliant Printing Protocol Level 2 Programming Supplement.
    [Show full text]