DOCSLIB.ORG

Internal Roof and Attic Thermal Radiation Control Retrofit Strategies for Cooling-Dominated Climates A

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Internal Roof and Attic Thermal Radiation Control Retrofit Strategies for Cooling-Dominated Climates A Internal Roof and Attic Thermal Radiation Control Retrofit Strategies for Cooling-Dominated Climates A. Fallahi, H. Durschlag, D. Elliott, J. Hartsough, N. Shukla, and J. Kosny Fraunhofer Center for Sustainable Energy Systems December 2013 NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, subcontractors, or affiliated partners makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States government or any agency thereof. Available electronically at http://www.osti.gov/bridge Available for a processing fee to U.S. Department of Energy and its contractors, in paper, from: U.S. Department of Energy Office of Scientific and Technical Information P.O. Box 62 Oak Ridge, TN 37831-0062 phone: 865.576.8401 fax: 865.576.5728 email: mailto:[email protected] Available for sale to the public, in paper, from: U.S. Department of Commerce National Technical Information Service 5285 Port Royal Road Springfield, VA 22161 phone: 800.553.6847 fax: 703.605.6900 email: [email protected] online ordering: http://www.ntis.gov/ordering.htm Printed on paper containing at least 50% wastepaper, including 20% postconsumer waste Internal Roof and Attic Thermal Radiation Control Retrofit Strategies for Cooling-Dominated Climates Prepared for: The National Renewable Energy Laboratory On behalf of the U.S. Department of Energy’s Building America Program Office of Energy Efficiency and Renewable Energy 15013 Denver West Parkway Golden, CO 80401 NREL Contract No. DE-AC36-08GO28308 Prepared by: A. Fallahi, H. Durschlag, D. Elliott, J. Hartsough, N. Shukla, and J. Kosny Fraunhofer Center for Sustainable Energy Systems (CSE) Building Energy Efficiency Group 5 Channel Center Street Boston, MA 02210 NREL Technical Monitor: Chuck Booten Prepared under Subcontract No. KNDJ-0-40345-02 December 2013 iii [This page left blank] iv Contents List of Figures ............................................................................................................................................ vi List of Tables ............................................................................................................................................ viii Abbreviations ............................................................................................................................................. ix Acknowledgment ........................................................................................................................................ 1 Executive Summary .................................................................................................................................... 2 1 Introduction ........................................................................................................................................... 4 2 Field Testing .......................................................................................................................................... 8 2.1 Instrumentation ..................................................................................................................13 2.2 Radiation Control Technology Installations ......................................................................17 2.2.1 Radiant barrier with enclosed airspace ..................................................................17 2.2.2 Interior Radiation Control Coating (IRCC) ...........................................................18 3 Experimental Data Analysis .............................................................................................................. 20 3.1 External and Internal Air Temperature Comparisons ........................................................20 3.2 Experimental Attic Air Temperature Comparisons ...........................................................29 3.3 Experimental Heat Flux Comparison.................................................................................44 4 Energy Modeling ................................................................................................................................. 47 4.1 Model Description .............................................................................................................47 4.2 Calibration of Whole Building Energy Model ...................................................................50 4.3 Prediction of the Cooling Energy Consumption ................................................................53 4.4 Modeling Results ...............................................................................................................53 5 Cost Effectiveness Analysis .............................................................................................................. 56 6 Conclusions ........................................................................................................................................ 58 References ................................................................................................................................................. 60 Appendix A- Historical Energy Consumption Data ............................................................................... 62 v List of Figures Figure 1. Location of site. ........................................................................................................................... 8 Figure 2. Location of thermistor arrays and heat flow transducers inside the tested attics (Right); Bird view image of the duplexes in Austin, TX (Left). ....................................................................... 9 Figure 3. Estimated brick wall construction: 2 in. brick, 1 in. air gap, ½ in. OSB, 2×4 stud wall with batt insulation, gypsum wall board (left); Estimated clapboard siding: clapboard, battens, ½ in. OSB, 2×4 stud wall with batt insulation, gypsum wall board (right). ............................................ 10 Figure 4. Existing insulation conditions in Duplex 1. Note the inconsistent levels of loose-fill insulation. ............................................................................................................................................ 10 Figure 5. Existing insulation conditions in Duplex 2. Note the inconsistent levels of loose-fill insulation. ............................................................................................................................................ 11 Figure 6. Existing insulation conditions in Duplex 2 (left) and Duplex 1 attic over living space (above right) and over garage (below right). ................................................................................... 12 Figure 7. Visible gaps around ducts entering attic. .............................................................................. 12 Figure 8. Location of the vents for attics over living spaces in Duplex 1. .......................................... 13 Figure 9. Location of the vents for attics over living spaces in Duplex 2. .......................................... 13 Figure 10. Diagrams of the attic sensor distributions for a RB combined with an enclosed reflective air space (upper diagram), and IRCC and baseline (lower diagram). .......................... 15 Figure 11. Thermistors installed on interior, exterior and attic to capture surface temperatures. .. 16 Figure 12. DAQ Components. .................................................................................................................. 17 Figure 13. Installation of RB with enclosed airspace from Fi-Foil Company (Silver Shield). ........... 18 Figure 14. Installation of IRCC from Solec-Solar Energy Corporation (LO/MIT-II MAX) (left) and from STS Coating, Inc. (HeatBloc-Ultra) (right). .............................................................................. 19 Figure 15. Measured exterior air temperature on one of the test houses. .......................................... 21 Figure 16. Average daily roof surface temperatures recorded during the April measure period. ... 22 Figure 17. Average daily roof surface temperatures recorded during the June/July measure period.23 Figure 18. Average daily roof surface temperatures recorded during the July/August measure period. .................................................................................................................................................. 24 Figure 19. Maximum roof surface temperatures recorded during the April measure period. .......... 25 Figure 20. Maximum roof surface temperatures recorded during the June/July measure period. .. 26 Figure 21. Maximum roof surface temperatures recorded during the July/August measure period.27 Figure 22. Average interior air temperatures recorded during the April measure period. ................ 28 Figure 23. Average interior air temperatures recorded during the June/July measure period. ....... 29 Figure 24. Example of attic air temperatures
Load more

Recommended publications
  • Radiant Insulation Solutions Radiant Insulation Solutions Now More Than Ever
    Fi-Foil Radiant Insulation Solutions Radiant Insulation Solutions Now more than ever... COMMERCIAL Architects, Builders and Homeowners are demanding superior energy-efficiency, comfort, value, along with safe, sustainable building materials. Building Green For more than 25 years, Fi-Foil has been committed to the principles of sustainable construction. Our radiant barrier and reflective The Fi-Foil Family of insulation products are Energy Star® compliant, and meet or exceed Insulation Products various performance and code criteria established by national, regional and local governing bodies. Fi-Foil products can also contribute LEED credits for "Energy, Materials & Resources," confirming our After more than two decades of service, Fi-Foil continues to lead the industry in radiant insulation solutions for commercial buildings. commitment to you, the industry and our world. Fi-Foil’s two main product categories are: • Reflective Insulation • Radiant Barriers Reflective Insulation uses layers of aluminum foil, paper and/or plastic to enclose a building For more information, visit our website at cavity. These layers form reflective air spaces that greatly reduce radiant heat transfer and heat flow www.FiFoil.com. by convection. Radiant Barriers are primarily used in a vented cavity to reduce radiant heat transfer, which is often the primary method of heat gain and loss in a structure. P.O. Box 800 Auburndale, FL 33823 Toll-free 1-800-448-3401 863-965-1846 Fax 863-967-0137 Our Solutions Reflect on You Fi-Foil Radiant Insulation Solutions - Commercial Masonry Wall Insulation Metal Building Insulation Roof/Attic Radiant Barrier Leading energy-efficiency experts recognize radiant barriers as an energy-saving technology and a key • Replaces or Complements Foam Board or Foam Filled Cavities component to an energy-efficient home.
    [Show full text]
  • Evaluation of the Thermal Performance and Cost Effectiveness of Radiant
    Louisiana State University LSU Digital Commons LSU Doctoral Dissertations Graduate School 2012 Evaluation of the thermal performance and cost effectiveness of radiant barrier thermal insulation materials in residential construction Somayeh Asadi Louisiana State University and Agricultural and Mechanical College, [email protected] Follow this and additional works at: https://digitalcommons.lsu.edu/gradschool_dissertations Part of the Engineering Science and Materials Commons Recommended Citation Asadi, Somayeh, "Evaluation of the thermal performance and cost effectiveness of radiant barrier thermal insulation materials in residential construction" (2012). LSU Doctoral Dissertations. 1295. https://digitalcommons.lsu.edu/gradschool_dissertations/1295 This Dissertation is brought to you for free and open access by the Graduate School at LSU Digital Commons. It has been accepted for inclusion in LSU Doctoral Dissertations by an authorized graduate school editor of LSU Digital Commons. For more information, please [email protected]. EVALUATION OF THE THERMAL PERFORMANCE AND COST EFFECTIVENESS OF RADIANT BARRIER THERMAL INSULATION MATERIALS IN RESIDENTIAL CONSTRUCTION A Dissertation Submitted to the Graduate Faculty of the Louisiana State University and Agricultural and Mechanical College in partial fulfillment of the requirements for the degree of Doctor of Philosophy in The Interdepartmental Program in Engineering Science by Somayeh Asadi B.S., Semnan University, 2003 M.S., Louisiana State University, 2011 August 2012 ACKNOWLEDGEMENTS My deepest thanks are to my adviser, Dr. Marwa Hassan. She always supported me to explore new ideas, to question common assumptions, and to operationally think about social systems. Her expertise in understanding and analyzing problems and her visionary approach to guiding advisees were invaluable assets for me. In-depth discussions with Marwa sometimes went beyond research, reminding me why we live, what we want, how we can help the public, and why family is the priority.
    [Show full text]
  • The Home Builders' Differential Insulation Of
    Reflective Insulation Manufacturers Association THE HOME BUILDERS’ DIFFERENTIAL INSULATION OF THE 90’s AND BEYOND RADIANT BARRIER AND REFLECTIVE INSULATION Many homeowners today are concerned with the energy efficiency of their homes as well as saving money. The hot summers and cold winters offer quite a challenge to technology, but there is a simple answer: Radiant Barrier and Reflective Insulation! What is Radiant Barrier? Let’s look at the reflective lining in a thermos bottle. When you put hot soup or coffee in a thermos it stays hot. When you put in cold milk or juice it stays cold. The temperature of the liquid is actually reflecting off of the lining to keep it hot or cold. An insulating foil material was also the choice for astronauts’ suits to protect against severe heat and cold. Radiant Barriers are also used by firefighters to protect them against the brutally hot temperatures they encounter in the line of duty. Now that we know a little about what radiant barriers are let’s talk about how heat is conducted. There are three ways: by conduction, by convection and by radiation. Conduction refers to the transmission of heat by the passage of energy from particle to particle – they way heat is transferred directly as from a burner to a cooking pot. Convected heat refers to the transference of heat by movement of upward air current, such as the rising of heat. Radiant heat is gained by energy traveling in waves through the air in any direction, such as the sun shining down on a rooftop in hot summer months.
    [Show full text]
  • Radiant Barrier Sheathing Radiant Barrier Sheathing
    “The Wood Products Council” is a Registered Provider with The American Institute of Architects Continuing Education Systems (AIA/CES). Credit(s) earned on completion of this program will be reported to AIA/CES for AIA members. Certificates of Completion for both AIA members and non-AIA members are available upon request. Copyright Materials This program is registered with AIA/CES for continuing professional education. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any This presentation is protected by US and material of construction or any method or manner of handling, using, International Copyright laws. Reproduction, distributing, or dealing in any material or product. distribution, display and use of the presentation without written permission of the speaker is Questions related to specific materials, methods, and services will prohibited. be addressed at the conclusion of this presentation. © The Wood Products Council 2012 Slide 2 of 35 Radiant Barrier Sheathing Radiant Barrier Sheathing LP Building Products 414 Union Street, Suite 2000 Nashville, TN 37219 Tony Pugel, Ph.D www. LPcorp.com Course Number: LPTS01 Senior Process Technologist Learning Units: 1.00 LP Building Products LP Building Products is a Registered Provider with The American Institute of Architects Continuing Education Systems. Credit earned on Nashville TN completion of this program will be reported to CES Records for AIA members. Certificates of Completion for non-AIA members are available upon request. (615)598-3074 This program is registered with AIA/CES for continuing professional registration. As such, it does not include content that may be deemed or construed to be an approval or endorsement by the AIA of any material or construction or any method or manner of handling, using, [email protected] distributing or dealing in any material or product.
    [Show full text]
  • Outstanding Characteristics of Tekfoil™ Hi-Performance Reflective Insulation
    OUTSTANDING CHARACTERISTICS OF TEKFOIL™ HI-PERFORMANCE REFLECTIVE INSULATION Unaffected by ultraviolet rays Stops air inltration Better ventilation Environmentally safe Better temperature control Nontoxic Nonallergenic High-quality materials Anti-static Fights moisture Resists corrosion Chemically inert Does not support growth of bacteria and fungi Lightweight and exible Discourages insect Electromagnetic eld barrier Easy to install – and rodent nesting all you need are scissors and a staple gun. Reects up to 97% of Great for retrotting radiant energy Allows easy passage of Energy transfer kept to plumbing and wiring minimum levels Multi-Layer No shrinkage or tearing Highly light reective Lowering energy costs couldn’t be easier with TekFoil Reective Insulation. Reecting 97% of radiant energy (the major source of heat ow into and out of a building), TekFoil keeps heat where you need it – outside when it’s hot and inside when it’s not. Perfect for the “do-it-yourselfer,” TekFoil is easy to install and can be used in a wide variety of applications. REFLECTIVE INSULATION KEEPS HEAT WHERE YOU WANT IT A practical and efficient solution to rising energy costs Easy to install Retrofits are a breeze Use in new construction Save on energy costs Great for any project VARIETIES OF TEKFOIL™ R/B/R – Reflective/Bubble/Reflective R/B/WP – Reflective/Bubble/ R/K – Reflective/Kraft R/BB/R – Reflective/Bubble White Polyethylene R/R – Fire-Retardant Reflective Bubble/Reflective R/BB/WP – Reflective/Bubble Bubble/ Great radiant barrier. Perforated available for use Perfect for use with new and retrofit residential, White Polyethylene with existing vapor barrier.
    [Show full text]
  • 5 Things You Must Know Before Buying Radiant Barrier
    Consumer Report: 5 Things You Must Know Before Buying Radiant Barrier 1 INDEX I: How Do Radiant Barriers Really ork pg 3 A: Understanding Heat Transfer pg 333 B: How Radiant Barriers Stop the Heat pg 444 II: hat Type of Savings Can I Expect pg 555 III: How, hen and here to Install Radiant Barrier pg 777 A: Perforated or Non,Perforated pgpgpg 777 B: Re-uired Installation Tools pgpgpg 888 C: here to Install Radiant Barrier pgpgpg 999 I.: Radiant Barrier Myths/ Busted pg 101010 A: Radiant Barrier Paint vs. Rolls pg 10 B: Radiant Barrier 1 Roof Shingles pg 101010 .: Not All Radiant Barriers Are Made the Same pg 111111 2 I: How Do Radiant Barriers Really ork2 To help you to understand how a radiant arrier works, let me first start y explaining a little a out heat transfer. When talking a out radiant arriers, insulation, ()AC systems and energy efficiency, it is important that we recogni-e that all of these things are a out controlling heat. A. /nd/nderstandingerstanding (eat Transfer (eat transfer happens in homes and uilding in three distinct ways. * Conductive heat transfer (conduction) * Convective heat transfer (convection) * Radiant heat transfer (thermal radiation) Conduction is the least efficient method of transferring heat, and in a kitchen analogy, that would e an e0ui1alent of oiling water in a pot o1er a sto1e. The fire heats the pot and the pot transfers its heat to the water and the water e1entually comes to a oil. The key point here is that conduction is the transfer of heat through direct physical contact.
    [Show full text]
  • Straight Talk About Radiant Barriers
    ti 3 4":1-/ Straight Talk about Radiant Barriers attics in either of two locations: I) laid directly on top of by Cliff Henke the conventional insulation, or 2) attached beneath the roof decking. During the summer, the sun heats the roof to temperatures of 150°F and higher. Without a radiant Radiant barriers do save energy, but barrier, the hot roof emits radiation that travels across the many advocates worry that the overstated attic space and is absorbed by the top of the insulation. Because its top surface is warm, the insulation transfers cl,aims of some manufacturers will spoil the heat in through the ceiling by conduction. market before it gets established. This is Ifa radiant barrier is laid on top of the insulation (with the reflective side up), the radiant heat emitted by the the first of a twojJart series investigating roof is not absorbed, but is reflected back toward the roof. radiant barriers. The first article discusses The result is that th.e top of the insulation is cooler, and heat transfer through the ceiljng is reduced. the research done to date-and its On the other hand, if a radiant barrier is installed near limitations. The second will focus on the the roof, with the reflective side facing down, the radiant exaggerated cwims made by some radiant barrier will become heated by the roof via convection. Since a highly reflective surface is also a poor emitter, the barrier companies and the resulting radiant barrier emits less radiation than the roof surface confusion over their cost-effectiveness.
    [Show full text]
  • Reflective Insulation, Radiant Barriers and Radiation Control Coatings
    Understanding and Using Reflective Insulation, Radiant Barriers And Radiation Control Coatings Compiled by Second Edition May 2002 Second Edition Copyright© May 2002 Reflective Insulation Manufacturers Association International (RIMA-I) 14005 W. 147 th Street, Olathe, KS 66062 Phone: 800-279-4123 Fax 913-839-8882 The Reflective Insulation Manufacturers Association International (RIMA-I), its members, and/or agents, make no guarantee as to, and assume no responsibility for, the correctness, sufficiency or completeness of the information contained herein. The information provided herein is intended to be a guide to the concept and applications of reflective insulation, radiant barriers and interior radiation control coatings. TABLE OF CONTENTS 1. ABOUT RIMA INTERNATIONAL................................................................................................................................. 1 2. INTRODUCTION ........................................................................................................................................................... 1 3. OBJECTIVES ................................................................................................................................................................ 1 4. FUNDAMENTALS OF HEAT TRANSFER.................................................................................................................. 2 4.1 Conduction 4.2 Convection 4.3 Radiation 5. THE NEED FOR INSULATION ...................................................................................................................................
    [Show full text]
  • Radiant Barriers Or Reflective Barriers
    Radiant Barriers or Reflective Barriers ―Radiant barriers or reflective barriers inhibit heat transfer by thermal radiation. Thermal energy may also be transferred via conduction or convection, however, and radiant barriers do not necessarily protect against heat transfer via conduction or convection..‖ About Radiant barriers or Reflective Barriers Reflectivity and Emissivity All materials give off, or emit, energy by thermal radiation as a result of their temperature. The amount of energy radiated depends on the surface temperature and a property called the emissivity (also called the "emittance"). Emissivity is expressed as a number between zero (0) and one (1) at a given wavelength. The higher the emissivity, the greater the emitted radiation at that wavelength. A related material property is the reflectivity (also called the "reflectance"). This is a measure of how much energy is reflected by a material at a given wavelength. The reflectivity is also expressed as a number between 0 and 1 (or a percentage between 0 and 100%). At a given wavelength and angle of incidence the emissivity and reflectivity values sum to 1 by Kirchhoff's law. Radiant barrier materials must have low emissivity at the wavelengths at which they are expected to function. For typical building materials, the wavelengths are in the mid- and long- infrared spectrum, in the range of 3 - 15 micrometres. Radiant barriers may or may not exhibit high visual reflectivity. This is because while reflectivity and emissivity must sum to 1 at a given wavelength, reflectivity at one set of wavelengths (visible) and emissivity at a different set of wavelengths (thermal) do not necessarily sum to 1.
    [Show full text]
  • Fi-Foil Corporate Brochure
    PHILOSOPHY & APPROACH Fi-Foil has long been committed to advancing green building technology through high-performance insulation innovations. Our reflective insulation and radiant barriers provide energy efficiency and superior thermal performanceresidential, for commercial and industrial buildings. Fi-Foil opened in 1983 with the goal to create radiant insulation and barrier products that contribute to better energy efficiency and indoor comfort. This goal remains strong today and has expanded to include a commitment to sustainable design and educating customers to understand the benefits and values of reflective technologies. All these goals remain part of the mission today—along with a commitment to provide exceptional customer service and integrity at the center of all we do. As a leading manufacturer of air and specialty barriers and reflective insulation, Fi-Foil has been specified by production and custom builders and preferred by local and national insulation contractors & distributors including TopBuild, TruTeam, Service Partners, Installed Building Products (IBP), Pinnacle Housing Corporation, Kolter Properties, Moss Construction, Convenience Products, PrimeSource Building Products, The Home Depot, Lowe’s, D.R. Horton, Lennar, Pulte Homes, Neal Communities, along with energy consultants including Two Trails and SkyeTec and leading architects designing for sustainability and resilience. Since 2017, Fi-Foil components have been specified in the National Association of Home Builders’ (NAHB) showcase homes — The New American Home (TNAH) and the New American Remodel (TNAR). Why Fi-Foil? Fi-Foil’s innovative radiant insulation products improve building efficiency and indoor comfort. We dedicate resources to developing new solutions for improved energy sustainability. Our products meet or exceed ASTM International standards with compliance verified by reputable third parties.
    [Show full text]
  • Chapter 11 Energy Efficiency
    CHAPTER 11 ENERGY EFFICIENCY SECTION N1100 ADMINISTRATION N1100.0 Scope. This code is a statewide uniform code and shall not be made more stringent or lenient by local government. The code provides for a uniform standard of energy efficiency by, at a minimum, setting forth minimum requirements for exterior envelopes and selection of heating, ventilating, air conditioning and service water heating systems. This chapter shall apply to all new single- and two family residential dwelling units buildings and townhomes, to additions to existing residential buildings and manufactured homes, to renovations to existing residential buildings, with certain exceptions, to changes of occupancy type, to the site-installed components and features of manufactured homes at their first set-up, and to the installation or replacement of building systems and components with new products for which thermal efficiency standards are set by this code. New residential buildings, with the exception of those exempted below, and in accordance with the specific exceptions of individual sections shall be designed to comply with this chapter. N1100.0.1 Exempt residential buildings. Residential buildings exempt from compliance with this chapter include those listed below: 1. Existing buildings except those considered renovated buildings, changes of occupancy type, or previously unconditioned buildings to which comfort conditioning is added. 2. Any building that is neither heated nor cooled by a mechanical system designed to control or modify the indoor temperature and powered by electricity or fossil fuels. Such building shall not contain electrical, plumbing or mechanical systems which have been designed to accommodate the future installation of heating or cooling equipment.
    [Show full text]
  • De-Rating Recommendations for Reflective
    De-rating Recommendations Derived from Past Research for Reflective Aluminium Foil Insulations As a Result of Dust Accumulation 2 Aim of this Paper The paper summarises research studies on the effect of dust on the thermal performance of reflective aluminium foil surfaces in residential attics. It also presents material to support a case for minimal de-rating of effective emissivity, if any, of reflective aluminium foil surfaces installed horizontally and NO de-rating of reflective aluminium foil insulation surfaces elsewhere. Conclusions and Recommendations x Reflective foil insulation should only be de-rated for upward facing surfaces and then only when dust is present in the surrounding environment with access to the surface. x Reflective foil insulation in roof spaces in warm to hot climates should be installed to maximize its effect as a radiant barrier by sealing the roof space. x There is no evidence to support de-rating of upward facing reflective foil insulation in Australia to the full extent - that is to 0.9 effective emissivity. The maximum de- rating for a very dusty environment achieved in the laboratory, and not likely in suburban Australia, is an effective emissivity generally in the range of 0.7 to 0.8, depending on the dust particles. x The matching downward facing reflective surface, not de-rated, should be installed with an air gap below it to ensure maximum thermal performance of BOTH upward and downward facing surfaces. x Published R Values and energy rating systems should be reviewed to eliminate current de-rating prejudice in their treatment of reflective foil insulation surfaces (upwards and downward facing surfaces) in light of research findings.
    [Show full text]