DOCSLIB.ORG

Analog and Digital Signals Digital Electronics TM 1.2 Introduction to Analog

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Analog and Digital Signals Digital Electronics TM 1.2 Introduction to Analog Analog and Digital Signals Digital Electronics TM 1.2 Introduction to Analog Analog & Digital Signals This presentation will • Review the definitions of analog and digital signals. • Detail the components of an analog signal. • Define logic levels. Analog & Digital Signals • Detail the components of a digital signal. • Review the function of the virtual oscilloscope. Digital Electronics 2 Analog and Digital Signals Example of Analog Signals • An analog signal can be any time-varying signal. Analog Signals Digital Signals • Minimum and maximum values can be either positive or negative. • Continuous • Discrete • They can be periodic (repeating) or non-periodic. • Infinite range of values • Finite range of values (2) • Sine waves and square waves are two common analog signals. • Note that this square wave is not a digital signal because its • More exact values, but • Not as exact as analog, minimum value is negative. more difficult to work with but easier to work with Example: A digital thermostat in a room displays a temperature of 72. An analog thermometer measures the room 0 volts temperature at 72.482. The analog value is continuous and more accurate, but the digital value is more than adequate for the application and Sine Wave Square Wave Random-Periodic significantly easier to process electronically. 3 (not digital) 4 Project Lead The Way, Inc. Copyright 2009 1 Analog and Digital Signals Digital Electronics TM 1.2 Introduction to Analog Parts of an Analog Signal Logic Levels Before examining digital signals, we must define logic levels. A logic level is a voltage level that represents a defined Period digital state. (T) Logic HIGH: The higher of two voltages, typically 5 volts Frequency: Amplitude Logic LOW: The lower of two voltages, typically 0 volts (peak) 1 F Hz 5.0 v Amplitude T (peak-to-peak) Logic High Logic Level Voltage True/False On/Off 0/1 2.0 v HIGH 5 volts True On 1 Invalid LOW 0 volts False Off 0 Logic 0.8 v Level 5 0.0 v Logic Low 6 Example of Digital Signals Parts of a Digital Signal • Digital signal are commonly referred to as square waves or clock Amplitude: Falling Edge signals. For digital signals, this will ALWAYS be 5 volts. • Their minimum value must be 0 volts, and their maximum value Period: must be 5 volts. The time it takes for a periodic signal to • They can be periodic (repeating) or non-periodic. repeat. (seconds) Time Time High Low Frequency: (t ) (t ) Amplitude H L • The time the signal is high (tH) can vary anywhere from 1% of the A measure of the number of period to 99% of the period. occurrences of the signal per second. (Hertz, Hz) 5 volts Time High (t ): Rising Edge H Period (T) The time the signal is at 5 v. Time Low (tL): 0 volts The time the signal is at 0 v. Frequency: Duty Cycle: 1 t The ratio of t to the total period (T). F Hz DutyCycle H 100% H T T Rising Edge: A 0-to-1 transition of the signal. 7 Falling Edge: 8 A 1-to-0 transition of the signal. Project Lead The Way, Inc. Copyright 2009 2 Analog and Digital Signals Digital Electronics TM 1.2 Introduction to Analog Oscilloscope Virtual Oscilloscope: Multisim Oscilloscope Instrumentation Oscilloscope • The Oscilloscope is a piece of electronic Component test equipment that is used to capture and measure time-varying signals, both analog Markers: and digital. Displayed Signals Movable markers T1 & T2 • Oscilloscopes can be found on the Marker Display: workbench (physical) as well as part of a Displays the voltage & time intersect for the markers simulation tool (virtual). T1 & T2. • We will limit our usage to the virtual Timebase: Channel_X: Channel Selection Adjusts the time scale and Adjusts the horizontal oscilloscope. offset of the signals. This is scale and offset of the 9 common for all channels. selected channel. 10 Example: Digital Signal Example: Digital Signal Example: Solution: Determine the following information for the digital signal shown: Amplitude: 2 V • Amplitude Amplitude 2.5 div div • Period (T) Amplitude 5 v • Frequency (f) 2 ms / div • Time High (tH) 2 v / div • Time Low (tL) Period (T): 2 ms • Duty Cycle (DC) T 4 div div T 8 ms Frequency (f): 1 1 f T 8 ms f 125 Hz 11 12 Project Lead The Way, Inc. Copyright 2009 3 Analog and Digital Signals Digital Electronics TM 1.2 Introduction to Analog Example: Digital Signal Period Measurement with Markers Solution: The markers can be used to measure the Time High (t ): H period tH & tL (next slide). 2 ms tH 2.4 div div tH 4.8 ms 2 ms / div Period (T): Time Low (t ): 2 v / div L T 8 ms 2 ms tL 1.6 div div tL 3.2 ms Duty Cycle (DC): t DC H 100% T 4.8 ms DC 100% 8 ms 13 14 DC 60% tH & tL Measurement with Markers Low High ( tL): tL 3.214 ms Time High ( tH): tH 4.786 ms 15 Project Lead The Way, Inc. Copyright 2009 4 .
Load more

Recommended publications
  • Chapter 3: Data Transmission Terminology
    Chapter 3: Data Transmission CS420/520 Axel Krings Page 1 Sequence 3 Terminology (1) • Transmitter • Receiver • Medium —Guided medium • e.g. twisted pair, coaxial cable, optical fiber —Unguided medium • e.g. air, seawater, vacuum CS420/520 Axel Krings Page 2 Sequence 3 1 Terminology (2) • Direct link —No intermediate devices • Point-to-point —Direct link —Only 2 devices share link • Multi-point —More than two devices share the link CS420/520 Axel Krings Page 3 Sequence 3 Terminology (3) • Simplex —One direction —One side transmits, the other receives • e.g. Television • Half duplex —Either direction, but only one way at a time • e.g. police radio • Full duplex —Both stations may transmit simultaneously —Medium carries signals in both direction at same time • e.g. telephone CS420/520 Axel Krings Page 4 Sequence 3 2 Frequency, Spectrum and Bandwidth • Time domain concepts —Analog signal • Varies in a smooth way over time —Digital signal • Maintains a constant level then changes to another constant level —Periodic signal • Pattern repeated over time —Aperiodic signal • Pattern not repeated over time CS420/520 Axel Krings Page 5 Sequence 3 Analogue & Digital Signals Amplitude (volts) Time (a) Analog Amplitude (volts) Time (b) Digital CS420/520 Axel Krings Page 6 Sequence 3 Figure 3.1 Analog and Digital Waveforms 3 Periodic A ) s t l o v ( Signals e d u t 0 i l p Time m A –A period = T = 1/f (a) Sine wave A ) s t l o v ( e d u 0 t i l Time p m A –A period = T = 1/f CS420/520 Axel Krings Page 7 (b) Square wave Sequence 3 Figure 3.2 Examples of Periodic Signals Sine Wave • Peak Amplitude (A) —maximum strength of signal, in volts • FreQuency (f) —Rate of change of signal, in Hertz (Hz) or cycles per second —Period (T): time for one repetition, T = 1/f • Phase (f) —Relative position in time • Periodic signal s(t +T) = s(t) • General wave s(t) = Asin(2πft + Φ) CS420/520 Axel Krings Page 8 Sequence 3 4 Periodic Signal: e.g.
    [Show full text]
  • Discrete Cosine Transform Based Image Fusion Techniques VPS Naidu MSDF Lab, FMCD, National Aerospace Laboratories, Bangalore, INDIA E.Mail: [email protected]
    View metadata, citation and similar papers at core.ac.uk brought to you by CORE provided by NAL-IR Journal of Communication, Navigation and Signal Processing (January 2012) Vol. 1, No. 1, pp. 35-45 Discrete Cosine Transform based Image Fusion Techniques VPS Naidu MSDF Lab, FMCD, National Aerospace Laboratories, Bangalore, INDIA E.mail: [email protected] Abstract: Six different types of image fusion algorithms based on 1 discrete cosine transform (DCT) were developed and their , k 1 0 performance was evaluated. Fusion performance is not good while N Where (k ) 1 and using the algorithms with block size less than 8x8 and also the block 1 2 size equivalent to the image size itself. DCTe and DCTmx based , 1 k 1 N 1 1 image fusion algorithms performed well. These algorithms are very N 1 simple and might be suitable for real time applications. 1 , k 0 Keywords: DCT, Contrast measure, Image fusion 2 N 2 (k 1 ) I. INTRODUCTION 2 , 1 k 2 N 2 1 Off late, different image fusion algorithms have been developed N 2 to merge the multiple images into a single image that contain all useful information. Pixel averaging of the source images k 1 & k 2 discrete frequency variables (n1 , n 2 ) pixel index (the images to be fused) is the simplest image fusion technique and it often produces undesirable side effects in the fused image Similarly, the 2D inverse discrete cosine transform is defined including reduced contrast. To overcome this side effects many as: researchers have developed multi resolution [1-3], multi scale [4,5] and statistical signal processing [6,7] based image fusion x(n1 , n 2 ) (k 1 ) (k 2 ) N 1 N 1 techniques.
    [Show full text]
  • Digital Signals
    Technical Information Digital Signals 1 1 bit t Part 1 Fundamentals Technical Information Part 1: Fundamentals Part 2: Self-operated Regulators Part 3: Control Valves Part 4: Communication Part 5: Building Automation Part 6: Process Automation Should you have any further questions or suggestions, please do not hesitate to contact us: SAMSON AG Phone (+49 69) 4 00 94 67 V74 / Schulung Telefax (+49 69) 4 00 97 16 Weismüllerstraße 3 E-Mail: [email protected] D-60314 Frankfurt Internet: http://www.samson.de Part 1 ⋅ L150EN Digital Signals Range of values and discretization . 5 Bits and bytes in hexadecimal notation. 7 Digital encoding of information. 8 Advantages of digital signal processing . 10 High interference immunity. 10 Short-time and permanent storage . 11 Flexible processing . 11 Various transmission options . 11 Transmission of digital signals . 12 Bit-parallel transmission. 12 Bit-serial transmission . 12 Appendix A1: Additional Literature. 14 99/12 ⋅ SAMSON AG CONTENTS 3 Fundamentals ⋅ Digital Signals V74/ DKE ⋅ SAMSON AG 4 Part 1 ⋅ L150EN Digital Signals In electronic signal and information processing and transmission, digital technology is increasingly being used because, in various applications, digi- tal signal transmission has many advantages over analog signal transmis- sion. Numerous and very successful applications of digital technology include the continuously growing number of PCs, the communication net- work ISDN as well as the increasing use of digital control stations (Direct Di- gital Control: DDC). Unlike analog technology which uses continuous signals, digital technology continuous or encodes the information into discrete signal states (Fig. 1). When only two discrete signals states are assigned per digital signal, these signals are termed binary si- gnals.
    [Show full text]
  • Radar Transmitter/Receiver
    Introduction to Radar Systems Radar Transmitter/Receiver Radar_TxRxCourse MIT Lincoln Laboratory PPhu 061902 -1 Disclaimer of Endorsement and Liability • The video courseware and accompanying viewgraphs presented on this server were prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government nor any agency thereof, nor any of their employees, nor the Massachusetts Institute of Technology and its Lincoln Laboratory, nor any of their contractors, subcontractors, or their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, products, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government, any agency thereof, or any of their contractors or subcontractors or the Massachusetts Institute of Technology and its Lincoln Laboratory. • The views and opinions expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof or any of their contractors or subcontractors Radar_TxRxCourse MIT Lincoln Laboratory PPhu 061802 -2 Outline • Introduction • Radar Transmitter • Radar Waveform Generator and Receiver • Radar Transmitter/Receiver Architecture
    [Show full text]
  • Digital Television Systems
    This page intentionally left blank Digital Television Systems Digital television is a multibillion-dollar industry with commercial systems now being deployed worldwide. In this concise yet detailed guide, you will learn about the standards that apply to fixed-line and mobile digital television, as well as the underlying principles involved, such as signal analysis, modulation techniques, and source and channel coding. The digital television standards, including the MPEG family, ATSC, DVB, ISDTV, DTMB, and ISDB, are presented toaid understanding ofnew systems in the market and reveal the variations between different systems used throughout the world. Discussions of source and channel coding then provide the essential knowledge needed for designing reliable new systems.Throughout the book the theory is supported by over 200 figures and tables, whilst an extensive glossary defines practical terminology.Additional background features, including Fourier analysis, probability and stochastic processes, tables of Fourier and Hilbert transforms, and radiofrequency tables, are presented in the book’s useful appendices. This is an ideal reference for practitioners in the field of digital television. It will alsoappeal tograduate students and researchers in electrical engineering and computer science, and can be used as a textbook for graduate courses on digital television systems. Marcelo S. Alencar is Chair Professor in the Department of Electrical Engineering, Federal University of Campina Grande, Brazil. With over 29 years of teaching and research experience, he has published eight technical books and more than 200 scientific papers. He is Founder and President of the Institute for Advanced Studies in Communications (Iecom) and has consulted for several companies and R&D agencies.
    [Show full text]
  • How I Came up with the Discrete Cosine Transform Nasir Ahmed Electrical and Computer Engineering Department, University of New Mexico, Albuquerque, New Mexico 87131
    mxT*L. BImL4L. PRocEsSlNG 1,4-5 (1991) How I Came Up with the Discrete Cosine Transform Nasir Ahmed Electrical and Computer Engineering Department, University of New Mexico, Albuquerque, New Mexico 87131 During the late sixties and early seventies, there to study a “cosine transform” using Chebyshev poly- was a great deal of research activity related to digital nomials of the form orthogonal transforms and their use for image data compression. As such, there were a large number of T,(m) = (l/N)‘/“, m = 1, 2, . , N transforms being introduced with claims of better per- formance relative to others transforms. Such compari- em- lh) h = 1 2 N T,(m) = (2/N)‘%os 2N t ,...) . sons were typically made on a qualitative basis, by viewing a set of “standard” images that had been sub- jected to data compression using transform coding The motivation for looking into such “cosine func- techniques. At the same time, a number of researchers tions” was that they closely resembled KLT basis were doing some excellent work on making compari- functions for a range of values of the correlation coef- sons on a quantitative basis. In particular, researchers ficient p (in the covariance matrix). Further, this at the University of Southern California’s Image Pro- range of values for p was relevant to image data per- cessing Institute (Bill Pratt, Harry Andrews, Ali Ha- taining to a variety of applications. bibi, and others) and the University of California at Much to my disappointment, NSF did not fund the Los Angeles (Judea Pearl) played a key role.
    [Show full text]
  • Lecture 11 : Discrete Cosine Transform Moving Into the Frequency Domain
    Lecture 11 : Discrete Cosine Transform Moving into the Frequency Domain Frequency domains can be obtained through the transformation from one (time or spatial) domain to the other (frequency) via Fourier Transform (FT) (see Lecture 3) — MPEG Audio. Discrete Cosine Transform (DCT) (new ) — Heart of JPEG and MPEG Video, MPEG Audio. Note : We mention some image (and video) examples in this section with DCT (in particular) but also the FT is commonly applied to filter multimedia data. External Link: MIT OCW 8.03 Lecture 11 Fourier Analysis Video Recap: Fourier Transform The tool which converts a spatial (real space) description of audio/image data into one in terms of its frequency components is called the Fourier transform. The new version is usually referred to as the Fourier space description of the data. We then essentially process the data: E.g . for filtering basically this means attenuating or setting certain frequencies to zero We then need to convert data back to real audio/imagery to use in our applications. The corresponding inverse transformation which turns a Fourier space description back into a real space one is called the inverse Fourier transform. What do Frequencies Mean in an Image? Large values at high frequency components mean the data is changing rapidly on a short distance scale. E.g .: a page of small font text, brick wall, vegetation. Large low frequency components then the large scale features of the picture are more important. E.g . a single fairly simple object which occupies most of the image. The Road to Compression How do we achieve compression? Low pass filter — ignore high frequency noise components Only store lower frequency components High pass filter — spot gradual changes If changes are too low/slow — eye does not respond so ignore? Low Pass Image Compression Example MATLAB demo, dctdemo.m, (uses DCT) to Load an image Low pass filter in frequency (DCT) space Tune compression via a single slider value n to select coefficients Inverse DCT, subtract input and filtered image to see compression artefacts.
    [Show full text]
  • (12) United States Patent (10) Patent No.: US 7,994,744 B2 Chen (45) Date of Patent: Aug
    US007994744B2 (12) United States Patent (10) Patent No.: US 7,994,744 B2 Chen (45) Date of Patent: Aug. 9, 2011 (54) METHOD OF CONTROLLING SPEED OF (56) References Cited BRUSHLESS MOTOR OF CELING FAN AND THE CIRCUIT THEREOF U.S. PATENT DOCUMENTS 4,546,293 A * 10/1985 Peterson et al. ......... 3.18/400.14 5,309,077 A * 5/1994 Choi ............................. 318,799 (75) Inventor: Chien-Hsun Chen, Taichung (TW) 5,748,206 A * 5/1998 Yamane .......................... 34.737 2007/0182350 A1* 8, 2007 Patterson et al. ............. 318,432 (73) Assignee: Rhine Electronic Co., Ltd., Taichung County (TW) * cited by examiner Primary Examiner — Bentsu Ro (*) Notice: Subject to any disclaimer, the term of this (74) Attorney, Agent, or Firm — Browdy and Neimark, patent is extended or adjusted under 35 PLLC U.S.C. 154(b) by 539 days. (57) ABSTRACT The present invention relates to a method and a circuit of (21) Appl. No.: 12/209,037 controlling a speed of a brushless motor of a ceiling fan. The circuit includes a motor PWM duty consumption sampling (22) Filed: Sep. 11, 2008 unit and a motor speed sampling to sense a PWM duty and a speed of the brushless motor. A central processing unit is (65) Prior Publication Data provided to compare the PWM duty and the speed of the brushless motor to a preset maximum PWM duty and a preset US 201O/OO6O224A1 Mar. 11, 2010 maximum speed. When the PWM duty reaches to the preset maximum PWM duty first, the central processing unit sets the (51) Int.
    [Show full text]
  • A Soft-Switched Square-Wave Half-Bridge DC-DC Converter
    A Soft-Switched Square-Wave Half-Bridge DC-DC Converter C. R. Sullivan S. R. Sanders From IEEE Transactions on Aerospace and Electronic Systems, vol. 33, no. 2, pp. 456–463. °c 1997 IEEE. Personal use of this material is permitted. However, permission to reprint or republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE. I. INTRODUCTION This paper introduces a constant-frequency zero-voltage-switched square-wave dc-dc converter Soft-Switched Square-Wave and presents results from experimental half-bridge implementations. The circuit is built with a saturating Half-Bridge DC-DC Converter magnetic element that provides a mechanism to effect both soft switching and control. The square current and voltage waveforms result in low voltage and current stresses on the primary switch devices and on the secondary rectifier diodes, equal to those CHARLES R. SULLIVAN, Member, IEEE in a standard half-bridge pulsewidth modulated SETH R. SANDERS, Member, IEEE (PWM) converter. The primary active switches exhibit University of California zero-voltage switching. The output rectifiers also exhibit zero-voltage switching. (In a center-tapped secondary configuration the rectifier does have small switching losses due to the finite leakage A constant-frequency zero-voltage-switched square-wave inductance between the two secondary windings on dc-dc converter is introduced, and results from experimental the transformer.) The VA rating, and hence physical half-bridge implementations are presented. A nonlinear magnetic size, of the nonlinear reactor is small, a fraction element produces the advantageous square waveforms, and of that of the transformer in an isolated circuit.
    [Show full text]
  • The 1-Bit Instrument: the Fundamentals of 1-Bit Synthesis
    BLAKE TROISE The 1-Bit Instrument The Fundamentals of 1-Bit Synthesis, Their Implementational Implications, and Instrumental Possibilities ABSTRACT The 1-bit sonic environment (perhaps most famously musically employed on the ZX Spectrum) is defined by extreme limitation. Yet, belying these restrictions, there is a surprisingly expressive instrumental versatility. This article explores the theory behind the primary, idiosyncratically 1-bit techniques available to the composer-programmer, those that are essential when designing “instruments” in 1-bit environments. These techniques include pulse width modulation for timbral manipulation and means of generating virtual polyph- ony in software, such as the pin pulse and pulse interleaving techniques. These methodologies are considered in respect to their compositional implications and instrumental applications. KEYWORDS chiptune, 1-bit, one-bit, ZX Spectrum, pulse pin method, pulse interleaving, timbre, polyphony, history 2020 18 May on guest by http://online.ucpress.edu/jsmg/article-pdf/1/1/44/378624/jsmg_1_1_44.pdf from Downloaded INTRODUCTION As unquestionably evident from the chipmusic scene, it is an understatement to say that there is a lot one can do with simple square waves. One-bit music, generally considered a subdivision of chipmusic,1 takes this one step further: it is the music of a single square wave. The only operation possible in a -bit environment is the variation of amplitude over time, where amplitude is quantized to two states: high or low, on or off. As such, it may seem in- tuitively impossible to achieve traditionally simple musical operations such as polyphony and dynamic control within a -bit environment. Despite these restrictions, the unique tech- niques and auditory tricks of contemporary -bit practice exploit the limits of human per- ception.
    [Show full text]
  • (MSEE) COMMUNICATION, NETWORKING, and SIGNAL PROCESSING TRACK*OPTIONS Curriculum Program of Study Advisor: Dr
    MASTER OF SCIENCE IN ELECTRICAL ENGINEERING (MSEE) COMMUNICATION, NETWORKING, AND SIGNAL PROCESSING TRACK*OPTIONS Curriculum Program of Study Advisor: Dr. R. Sankar Name USF ID # Term/Year Address Phone Email Advisor Areas of focus: Communications (Systems/Wireless Communications), Networking, and Digital Signal Processing (Speech/Biomedical/Image/Video and Multimedia) Course Title Number Credits Semester Grade 1. Mathematics: 6 hours Random Process in Electrical Engineering EEE 6545 3 Select one other from the following Linear and Matrix Algebra EEL 6935 3 Optimization Methods EEL 6935 3 Statistical Inference EEL 6936 3 Engineering Apps for Vector Analysis** EEL 6027 3 Engineering Apps for Complex Analysis** EEL 6022 3 2. Focus Area Core Courses: 15 hours (Select a major core with 2 sets of sequences from groups A or B and a minor core (one course from the other group) A. Communications and Networking Digital Communication Systems EEL 6534 3 Mobile and Personal Communication EEL 6593 3 Broadband Communication Networks EEL 6506 3 Wireless Network Architectures and Protocols EEL 6597 3 Wireless Communications Lab EEL 6592 3 B. Signal Processing Digital Signal Processing I EEE 6502 3 Digital Signal Processing II EEL 6752 3 Speech Signal Processing EEL 6586 3 Deep Learning EEL 6935 3 Real-Time DSP Systems Lab (DSP/FPGA Lab) EEL 6722C 3 3. Electives: 3 hours A. Communications, Networking, and Signal Processing Selected Topics in Communications EEL 7931 3 Network Science EEL 6935 3 Wireless Sensor Networks EEL 6935 3 Digital Signal Processing III EEL 6753 3 Biomedical Image Processing EEE 6514 3 Data Analytics for Electrical and System Engineers EEL 6935 3 Biomedical Systems and Pattern Recognition EEE 6282 3 Advanced Data Analytics EEL 6935 3 B.
    [Show full text]
  • Reception Performance Improvement of AM/FM Tuner by Digital Signal Processing Technology
    Reception performance improvement of AM/FM tuner by digital signal processing technology Akira Hatakeyama Osamu Keishima Kiyotaka Nakagawa Yoshiaki Inoue Takehiro Sakai Hirokazu Matsunaga Abstract With developments in digital technology, CDs, MDs, DVDs, HDDs and digital media have become the mainstream of car AV products. In terms of broadcasting media, various types of digital broadcasting have begun in countries all over the world. Thus, there is a demand for smaller and thinner products, in order to enhance radio performance and to achieve consolidation with the above-mentioned digital media in limited space. Due to these circumstances, we are attaining such performance enhancement through digital signal processing for AM/FM IF and beyond, and both tuner miniaturization and lighter products have been realized. The digital signal processing tuner which we will introduce was developed with Freescale Semiconductor, Inc. for the 2005 line model. In this paper, we explain regarding the function outline, characteristics, and main tech- nology involved. 22 Reception performance improvement of AM/FM tuner by digital signal processing technology Introduction1. Introduction from IF signals, interference and noise prevention perfor- 1 mance have surpassed those of analog systems. In recent years, CDs, MDs, DVDs, and digital media have become the mainstream in the car AV market. 2.2 Goals of digitalization In terms of broadcast media, with terrestrial digital The following items were the goals in the develop- TV and audio broadcasting, and satellite broadcasting ment of this digital processing platform for radio: having begun in Japan, while overseas DAB (digital audio ①Improvements in performance (differentiation with broadcasting) is used mainly in Europe and SDARS (satel- other companies through software algorithms) lite digital audio radio service) and IBOC (in band on ・Reduction in noise (improvements in AM/FM noise channel) are used in the United States, digital broadcast- reduction performance, and FM multi-pass perfor- ing is expected to increase in the future.
    [Show full text]