How to Clean a

Task C ard

It is essential to keep clean. A dirty toilet will look bad, smell bad and breed germs. Use these instructions to guide you through this task quickly and efficiently.

Equipment Required

CA UTION

Toilet Toilet Cleaning CLE Cleaning Solution IN ANING PROG Solution RESS

1 Safety Signs. 2 Bucket (colour coded). 3 Toilet Brush & holder. 4 Toilet Cleaning Solution. PPE - Gloves. Cleaning cloth. Plus any additional PPE Abrasive pad. specific to chemical. Preparation

T C oile lea t So nin CAU lut g TION ion

CLE HALF IN ANING PROG RESS WAY

1 Place safety signs. 2 Check bucket is 3 Fill bucket half 4 Add cleaning 5 If possible, ventilate Wear appropriate clean and ready way with water. solution to the the room i.e. open PPE. to use. If dirty, water according windows. rinse out with to directions on clean water. the label. (Note: Always add chemical to water, not the other way round as to avoid chemical splashing).

Cleaning the Toilet

S

o C

l

l u

e

t

a

i

T o

n

o

n

i

i n

l

e g t

60 55 5 50 10 45 15 40 20 35 25 30 1 Flush the toilet with seat 2 Reveal water line by 3 Apply toilet cleaner to 4 Place cloth into bucket lid closed. pushing back water in the the inside of the bowl, to absorb cleaning toilet bowl with toilet brush. including under the rim solution. and allow several minutes contact time.

This task card is offered as guidance only. It is your responsibility to ensure that it reflects the use of the product in your operation and www.jangro.net amend accordingly. XC002

Cleaning the Toilet...Continued

OR

5 Wring excess solution/ 6 Start wiping the outside 7 When you have covered a 8 For heavy soiled areas water from the cloth. and around the toilet, small area or when the cloth apply pressure to the including , is dirty, insert the cloth back cloth, or use the abrasive pipework, toilet brush into the bucket. Wring the pad for stubborn marks. holder, cistern & handle, cloth and move to the next lid (top & area to be cleaned. Take underneath) and hinges. care to avoid splashes to other surfaces, if this occurs then wipe clean with a damp cloth.

9 Scrub inside the bowl with 10 rinsing the 11 seat with cloth, the toilet brush, particularly brush in flushing water. then close the lid. any stains, water line and Replace brush in holder. under rim.

Final Stages

CA UTION

CLE IN ANING PROG RESS

1 Discard dirty water from 2 Clean and dry the bucket. 3 Dispose/launder the cloth. 4 Remove safety sign when the bucket. area is dry and clear of trip hazards. Close any windows previously opened for ventilation.

This task card is offered as guidance only. It is your responsibility to ensure that it reflects the use of the product in your operation and www.jangro.net amend accordingly. XC002