DOCSLIB.ORG

TAPPI Extrusion Coating Course

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
TAPPI Extrusion Coating Course TAPPI Extrusion REGISTRATION2008 Extrusion Coating Course FIVE EASY WAYS April 29 - May 1, 2008 Coating Course GENERAL INFORMATION Doubletree Hotel Colorado Springs World Arena TO REGISTER: Colorado Springs, Colorado, USA Please circle: Mr. Ms. Mrs. Dr. Sr. Jr. 1 Mail: NEW this year! TAPPI, P.O. Box 933644 First Name Ml Last Name Atlanta, GA 31193-3644, USA A revised and updated program with group interaction TAPPI Member # Preferred Badge Name April 29 - May 1, 2008 and case studies, including: 2 Online: Go to Title _______________Company Name/Division “Case Studies for Improved Sustainability in Packaging” www.tappi.org/08extrusion Doubletree Hotel Jeffrey J. Wooster, DOW Chemical USA, and follow the instructions Company Address Winner of the 2007 PLACE Conference Best Paper Award City State/Province Colorado Springs World Arena “PLA / PHA Processing Tips & Products Markets” 3 Fax completed registration William E. Kelly, Cereplast, Inc. form to +1.770.209.7206 Zip/Postal Code Country Colorado Springs, Colorado, USA 4 Phone: 1.800.332.8686 (US), Telephone Fax 1.800.446.9431 (Canada) or Email +1.770.446.1400 (Worldwide) Is this the first TAPPI event you have attended? _____ Yes _____ No 5 Wire Transfer: 1. WHAT TYPE OF COMPANY DO YOU WORK FOR? ❏ Engineering (E) Call +1.770.446.1400 ❏ Pulp and Paper/Paperboard Manufacturing (1) ❏ Purchasing (F) for details ❏ Paperboard Packaging Integrated Converting Plant (4AD) ❏ Marketing & Sales (G) ❏ Paperboard Packaging Independent Converting Plant (4AO) ❏ Traffic & Shipping (H) ❏ Paperboard Packaging Headquarters (4AH) ❏ Other Management & Administrative Personnel (I) ❏ Independent Consultant: Engineering, Technical ❏ Other (J) __________________________ TAX DEDUCTIONS Production or Research (2) Expenses for continuing ❏ Manufacturer of Machinery, Equipment, Chemicals or Supplies (7) 3. WHAT IS YOUR PRIMARY INDUSTRY? (Check One) education taken to maintain ❏ Woodlands Operation (3) ❏ Pulp Mill Only (P) ❏ or improve professional Flexible Packaging Converting Plant (4BO) ❏ Technical/R&D Facility/Headquarters (H) ❏ Flexible Packaging Headquarters (4BH) ❏ Paper/Paperboard Mill Only (R) skills may be tax deductible. ❏ Dealer or Distributor of Supplies (8) ❏ Independent Operations or Converting Plant (O) Certain restrictions apply. ❏ University Professor (9A) ❏ Integrated Pulp/Paper/Paperboard Mill (D) Check with your accountant ❏ Full Time Student (9B) for details. If you are not ❏ University Library (9C) 4. HOW DID YOU HEAR ABOUT THE COURSE? completely satisfied that the ❏ Press (10A) ❏ Tappi.org website course delivered what was ❏ Library (10B) ❏ Email promised, we will refund your ❏ Association (10C) ❏ Brochure 28 and Save! March Register by Visit www.tappi.org/08EXTRUSION ❏ registration fee. Government (10D) ❏ Newsletter ❏ Retired (13) ❏ Colleague/Co-worker ❏ Nonwovens (14) ❏ Other: _________________________________ ❏ Printing/Graphic Arts (15) REGISTER BY MARCH 28 CANCELLATIONS ❏ Allied to the Industry (12) 5. WHEN CHOOSING A COURSE THE MOST If you find that you have to cancel, ❏ Industry Customer (End User) (16) IMPORTANT FACTOR TO YOU IS: your full registration fee will be ❏ Registration Fee AND SAVE! refunded if TAPPI’s Registration 2. WHAT IS YOUR PRIMARY JOB FUNCTION? ❏ Travel Costs Department receives written (Check One) ❏ Program Content notification, fax acceptable at ❏ Librarians – Corporate (A) ❏ Meeting Location Visit www.tappi.org/08EXTRUSION +1-770-446-6947 by the “early ❏ Corporate Management (B) ❏ Access to new technology ❏ bird” cut-off date of March 28, ❏ Production (C) Access to customers ❏ Networking/Peer Interactions 2008. Please Note: There will be ❏ Technical/Research & Development (D) a 50% refund for all written REGISTRATION FEE (Add total due on right) cancellations made after the early On/Before After bird date, but no later than 5 3/28/08 3/28/08 Total Network with your peers as well as a distinguished group of business days prior to the start TAPPI Member $ 850 $ 1420 of the course. Understandably, Non-Member 1275 2130 industry veterans to explore best practices and equipment after this time no refunds can be issued. Substitutions, however, Group of 3 (All TAPPI Members)* 640 1205 will be accepted any time without Group of 3 (Non-Members)* 955 1810 technology that applies to extrusion coating applications! ❏ a penalty. In the event that this Renew my TAPPI Membership for 12 months (add $174) ❏ course is cancelled, TAPPI will Join TAPPI and save! (add $174) refund all registration fees. Choose one complementary book: GA 30092 South • Norcross, Parkway Technology 15 Learn how to: TAPPI’s liability is limited solely ❏ Extrusion Coating Manual, 4th Ed. Item 0102B065 to the refund of registration fees. ❏ Roll and Web Defect Terminology 2nd. Ed. Item 0101R318 Order additional copies (Add one or more of these discounted books and pick them up when you arrive.) The contact information you ❏ Extrusion Coating Manual, 4th Ed. Item 0102B065 (add $79.00) • Streamline processes provide may be used by TAPPI ❏ Roll and Web Defect Terminology, 2nd Ed. Item: 0101R318 (add $99) or its business associates to notify you of items that may be • Achieve product design requirements and end uses of interest to you. I understand PAYMENT OPTIONS (All fees are in US dollars and must accompany registration) Code 2357 that under certain laws and Payments by check: Enclosed is check number ____ for $_______ • Maintain equipment regulations, TAPPI must have my (Make checks payable to TAPPI, must be in US dollars.) written permission in order to Please mail checks to: TAPPI, P.O. Box 933644 Atlanta, GA 31193-3644, USA communicate with me via fax or • Address safety concerns email. I hereby give TAPPI, TAPPI’s Payment by Wire: $______ was wired to TAPPI on (date) _______ business associates, the TAPPI (contact TAPPI at +1.770.446.1400 for wiring instructions) • Anticipate and resolve problems Foundation, and TAPPI’s Local Payment by credit card: Sections written permission to ❏ Please bill my credit card. (Complete the following information) communicate with me via: ❏ AMEX ❏ Diner’s Club ❏ Visa ❏ MasterCard ❏ Discover ❏ ❏ fax and/or email Credit Card #__________________________Exp. Date________ Signature___________________________________________ TAPPI Extrusion TAPPI Coating Course 2008 April 29 - May 1, Arena World Doubletree Hotel Colorado Springs NEW this year! including A revised and updated program with group interaction and case studies, “Case Studies for Improved Sustainability in Packaging” & Product Markets” Tips “PLA / PHA Processing with your peers as well a distinguished group Network of and equipmentindustry best practices to explore veterans coating applications! that applies to extrusion technology ❏ Check here if you have special requirements, and we will contact you. OVERVIEW SCHEDULE DETAILS Who will benefit most from this course? Preliminary Course Schedule CEUS Tuesday, April 29, 2008 Wednesday, April 30, 2008 The Education Project Center of TAPPI has been reviewed and • Extrusion engineers, supervisors and operators approved as an Authorized Provider by the International Association 8:00 a.m. to 6:30 p.m. 8:00 a.m. to 5:00 p.m. • Technical directors and superintendents for Continuing Education and Training (IACET). 1620 I Street, NW, Suite 615, Washington, D.C. 20006. TAPPI will award 2.5 CEUs to • Technical assistants Introduction and Welcome Gauging participants who attend at least 80% of the educational sessions • R&D personnel Introduction to Product Structures Treating (Corona, Plasma) and complete a final program evaluation. For maximum benefit, participants should have some familiarity with extrusion coating Polyethylene and Polypropylene Treating (Flame) Registration technology and terminology. A technical background and/or extrusion experience will Specialty Resins Web Handling / Winding Fees for the Extrusion Coating Course are $850 for TAPPI members be helpful. and $1275 for nonmembers who register by March 28, 2008. After PLA and PHA Processing Tips and Product Gel Troubleshooting After taking this course, attendees will be able to: March 28, 2008, fees are $1420 for TAPPI members and $2130 for Market What Happened? Troubleshooting nonmembers. You may add a TAPPI membership to your registration • List various product structures and their potential uses in packaging applications to receive the discounted price. For more information about being a Extruders Safety TAPPI member, visit www.tappi.org. • Identify and discuss the physical properties and processing issues for a variety of Screws extrusion coating resins Preventive Maintenance Purging Hotel • Discuss the capabilities, specifications and limitations of various extrusion coating To make your room reservations at the special discounted rate of $119 equipment Case Studies for Improved Sustainability in Thursday, May 1, 2008 single/double, go to www.tappi.org/o8extrusion or contact the hotel: Packaging (2007 PLACE Conference Best 8:00 a.m. to 3:45 p.m. Doubletree Hotel Colorado Springs World Arena • Explain and discuss the extrusion process that includes web handling, polymer Paper Award Winner) 1775 E. Cheyenne Mountain Blvd. processing, purging, and troubleshooting using the aid of video & literature. Colorado Springs, Colorado 80906 USA Networking Session with Refreshments Substrates • Recognize the various surface treatment options that are available and their Phone: 719-576-8900 Primers applications. Be sure to reserve your room by March 28, 2008 and mention that • Identify the unique equipment
Load more

Recommended publications
  • 3. Film Extrusion and Conversion
    FILM EXTRUSION AND CONVERSION 03 – TECHNICAL GUIDE Front Cover The Qenos Technical Centre operates a range of commercial and laboratory scale extrusion and moulding equipment for the injection moulding, blow moulding, fi lm extrusion (pictured), pipe extrusion and rotational moulding markets. Qenos manufactures a full range of fi lm grades for applications such as food contact, packaging and agriculture, including Alkamax metallocene mLLDPE resin for applications where superior performance is required at a thinner gauge. Qenos, the Qenos brandmark, Alkathene, Alkatuff, Alkamax, Alkadyne and Alkatane are trade marks of Qenos Pty Ltd. FILM EXTRUSION AND CONVERSION 3 3 FILM EXTRUSION AND CONVERSION TABLE OF CONTENTS PART A. FILM EXTRUSION 6 GRADE SELECTION FOR FILM EXTRUSION 6 Comparison of Product Types and Classes 6 Blending of LLDPE, mLLDPE and LDPE 7 Blending of HDPE with LLDPE and LDPE 8 Coextrusion 8 FILM EXTRUSION TECHNOLOGY 8 Process Description 8 Blown Film Parameters 9 RHEOLOGICAL CONSIDERATIONS 10 Flow in Shear 10 Extensional Flow 11 Melt Relaxation 11 Surface Melt Fracture 11 THE EXTRUSION PROCESS 12 Extruder Drive System 12 Heating and Cooling the Barrel 12 SCREW DESIGN 13 Conventional Screw Design 13 Modified and High Performance Screws 13 Barrier Flighted Screws 13 Extruder Head 14 Grooved Feed Section 14 FILM EXTRUSION DIES 14 Types of Film Die 15 Spiral Mandrel Dies 15 Coextrusion Film Dies 16 Die Design Principles for LDPE Polymers 16 Die Design Principles for LLDPE and mLLDPE Polymers 16 Wide Die Gap Extrusion 16 Narrow
    [Show full text]
  • A Guide to Polyolefin Blow Molding Z Bellows-Shaped Shields and Doublewall Instrument and Tool Carrying Cases
    A Guide to Polyolefin Blow Molding z Bellows-shaped shields and doublewall instrument and tool carrying cases. Polyolefins for Blow Molding H H This book contains extensive Polyolefins are the most widely used information on polyolefin blow molding; plastic for blow molding. This book, “A C = C however, it makes no specific Guide to Polyolefin Blow Molding,” recommendations for the processing of contains general information LyondellBasell Chemicals’ resins for H H concerning materials, methods and specific applications. For more detailed equipment for producing high quality information, please contact your polyolefin blow molded products at LyondellBasell polyolefins sales optimum production rates. Figure 1. Ethylene monomer representative. molecular structure Blow-Moldable Polyolefins and Other Products from LyondellBasell Applications Chemicals offers an extensive range of Polyolefins that can be blow polyolefin resins, plus polyolefin-based molded include: tie-layer resins not only for blow z Low density polyethylene (LDPE) molding, but also for: z Linear low density polyethylene (LLDPE) z Injection Molding z Medium density polyethylene z Film Extrusion (MDPE) z Extrusion Coating z High density polyethylene (HDPE) z Sheet and Profile Extrusion z Ethylene copolymers, such as H H H H H H H H H H z Wire and Cable Coating ethylene vinyl acetate (EVA) z Rotational Molding and Powder z Polypropylene and propylene coating C C C C C C C C C C copolymers (PP) z Blending and Compounding In general, the advantages of z Flame Retardant Applications H H H H H H H H H H polyolefin blow molding resins are good z Pipe processability, light weight, good toughness, outstanding chemical LyondellBasell also produces Figure 2.
    [Show full text]
  • Fabrication of Nanostructures by Roll-To-Roll Extrusion Coating
    View metadata,Downloaded citation and from similar orbit.dtu.dk papers on:at core.ac.uk Dec 21, 2017 brought to you by CORE provided by Online Research Database In Technology Fabrication of Nanostructures by Roll-to-Roll Extrusion Coating Murthy, Swathi; Matschuk, Maria; Huang, Qian; Mandsberg, N.K.; Feidenhans'l, Nikolaj Agentoft; Johansen, P.; Christensen, L.; Pranov, H.; Kofod, G.; Pedersen, Henrik Chresten; Hassager, Ole; Taboryski, Rafael J. Published in: Advanced Engineering Materials Link to article, DOI: 10.1002/adem.201500347 Publication date: 2015 Document Version Peer reviewed version Link back to DTU Orbit Citation (APA): Murthy, S., Matschuk, M., Huang, Q., Mandsberg, N. K., Feidenhans'l, N. A., Johansen, P., ... Taboryski, R. J. (2015). Fabrication of Nanostructures by Roll-to-Roll Extrusion Coating. Advanced Engineering Materials, 18(4), 484-489. DOI: 10.1002/adem.201500347 General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights. • Users may download and print one copy of any publication from the public portal for the purpose of private study or research. • You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal If you believe that this document breaches copyright please contact us providing details, and we will remove access to the work immediately and investigate your claim.
    [Show full text]
  • Packaging with Topas® Coc Packaging with Topas® Coc
    PACKAGING WITH TOPAS® COC PACKAGING WITH TOPAS® COC TOPAS Advanced Polymers TOPAS Advanced Polymers is the world’s leading maker of COC (cyclic TOPAS Advanced Polymers also supplies the chemical raw material nor- olefin copolymer), a glass-clear plastic for healthcare, optics, packag- bornene. A joint venture of Polyplastics Co., Ltd. and Daicel Corporation, ing, and electronics applications. From insulin delivery, to food contact the company is headquartered in Frankfurt, Germany. It operates the films, to tablet and smartphone displays, TOPAS is the high performance world's largest COC plant in Oberhausen, Germany. TOPAS® is a regis- material of choice. The broad global regulatory compliance of TOPAS tered trademark of TOPAS Advanced Polymers for its family of cyclic can make your next development a simpler task. olefin copolymer resins. Important The properties of articles can be affected by a variety of factors, includ- specified, the numerical values given in this literature are for reference ing choice of material, additives, part design, processing conditions, purposes only and not for use in product design. Without exception, and exposure to the environment. Customers should take responsibility please follow the information and other procedures explained in this as to the suitability of a particular material or part design for a spe- literature. This literature does not guarantee specific properties for our cific application. In addition, before commercializing a product that company’s products. Please take the responsibility to verify intellectual incorporates TOPAS, customers should take the responsibility of car- property rights of third parties. rying out performance evaluations. The products mentioned herein are not designed or promoted for use in medical or dental implants.
    [Show full text]
  • Food Packaging Technology
    FOOD PACKAGING TECHNOLOGY Edited by RICHARD COLES Consultant in Food Packaging, London DEREK MCDOWELL Head of Supply and Packaging Division Loughry College, Northern Ireland and MARK J. KIRWAN Consultant in Packaging Technology London Blackwell Publishing © 2003 by Blackwell Publishing Ltd Trademark Notice: Product or corporate names may be trademarks or registered Editorial Offices: trademarks, and are used only for identification 9600 Garsington Road, Oxford OX4 2DQ and explanation, without intent to infringe. Tel: +44 (0) 1865 776868 108 Cowley Road, Oxford OX4 1JF, UK First published 2003 Tel: +44 (0) 1865 791100 Blackwell Munksgaard, 1 Rosenørns Allè, Library of Congress Cataloging in P.O. Box 227, DK-1502 Copenhagen V, Publication Data Denmark A catalog record for this title is available Tel: +45 77 33 33 33 from the Library of Congress Blackwell Publishing Asia Pty Ltd, 550 Swanston Street, Carlton South, British Library Cataloguing in Victoria 3053, Australia Publication Data Tel: +61 (0)3 9347 0300 A catalogue record for this title is available Blackwell Publishing, 10 rue Casimir from the British Library Delavigne, 75006 Paris, France ISBN 1–84127–221–3 Tel: +33 1 53 10 33 10 Originated as Sheffield Academic Press Published in the USA and Canada (only) by Set in 10.5/12pt Times CRC Press LLC by Integra Software Services Pvt Ltd, 2000 Corporate Blvd., N.W. Pondicherry, India Boca Raton, FL 33431, USA Printed and bound in Great Britain, Orders from the USA and Canada (only) to using acid-free paper by CRC Press LLC MPG Books Ltd, Bodmin, Cornwall USA and Canada only: For further information on ISBN 0–8493–9788–X Blackwell Publishing, visit our website: The right of the Author to be identified as the www.blackwellpublishing.com Author of this Work has been asserted in accordance with the Copyright, Designs and Patents Act 1988.
    [Show full text]
  • A Guide to Polyethylene Blow Moulding
    POLYETHYLENE BLOW MOULDING 08 – TECHNICAL GUIDE Front Cover The Qenos Technical Centre operates a range of commercial and laboratory scale extrusion and moulding equipment for the injection moulding, blow moulding (pictured), fi lm extrusion, pipe extrusion and rotational moulding markets. Qenos produces a full range of Alkatane HDPE grades for blow moulding applications ranging from thin walled high speed milk and juice bottles to high molecular weight 1000L cubes. Alkatane – Super Clean. Super Safe. Qenos, the Qenos brandmark, Alkathene, Alkatuff, Alkamax, Alkadyne and Alkatane are trade marks of Qenos Pty Ltd. A GUIDE TO POLYETHYLENE 8 BLOW MOULDING 8 A GUIDE TO POLYETHYLENE BLOW MOULDING CONTENTS EXTRUSION BLOW MOULDING AND EXTRUSION BLOW MOULDING MACHINES 6 Basic Processing Principles 6 Plastication Systems 6 Basic Design of Plastication Systems 6 Shear Rate 7 Throughput Efficiency 7 Basic Requirements for the Plastication System 7 Single-screw extruders 8 Slow Running Extruders of Conventional Design 8 Specific Power Requirement 8 Output 8 Reciprocating Screw and Reciprocating Barrel Extruders 9 Reciprocating Screw Machines 10 Reciprocating Barrel Machines 10 High Speed Extruders 10 Twin-screw Extruders 10 Ram Extruders 11 Extrusion Dies for Continuous Parison Production 11 Axial Flow Crosshead with Spider Support 11 Radial Flow Crosshead with Through Mandrel 12 Design with Circular Groove 13 Design with Heart-shaped Channel 13 Parison Dies 14 Dies with cylindrically parallel annular gap 15 Design with Conical Inflow Zone 15 Expansion
    [Show full text]
  • Ecovio® Extrusion Brochure
    ecovio® Biologically degradable solutions for extrusion applications Blown film applications Cast / flat film applications (e. g. thermoforming) Extrusion coating of paper and cardboard Table of contents Bild ecovio® – certified biodegradable and bio-based 4 - 7 Characteristics of ecovio® 8 -11 Product portfolio 9 General characteristics 10 Processing of ecovio® 12 - 17 General information regarding processing 12 Extrusion processes (general) 13 Blown film extrusion 14 Extrusion coating 15 Cast / flat film extrusion 16 General Information 18 - 27 Processing and post-treatment 19 Safety precautions 20 Quality assurance 21 Delivery, storage and aging 21 Services 22 Glossary 23 Literature references 23 3 ecovio® – certified biodegradable and bio-based ecovio® – A HIGH QUALITY, VERSATILE BIOPLASTIC FROM BASF THAT IS CERTIFIED BIO-BASED AND BIODEGRADABLE Not biodegradable Biodegradable Based on renewable Bio-PE, Bio-PA, Bio-PUR, PLA, PHA resources Bio-PP Fossil-based PE, PP, PVC PBS Source: Hans-Josef Endres, Technical Bio-polymers, 2009. What are bioplastics? Biodegradable plastics can be broken down by microorganisms. In the process, the microorgan- The term “bioplastics” comprises two different isms emit enzymes which break down the polymer groups of products: “bio-based” and “biodegrad- chains of the plastic into smaller molecular compo- able” plastics. nents. These are subsequently absorbed by bac- teria and fungi, metabolized and, in the process, Bio-based plastics are wholly or partially derived converted into carbon dioxide, water and biomass. from renewable raw materials. For example, this Biodegradable plastics can, but do not have to be, material group includes polylactic acid (PLA), poly- produced based on renewable resources. hydroxyalkanoate (PHA) as well as the partially bio- based plastic ecoflex® FS from BASF.
    [Show full text]
  • Vacuum Packaging
    Packaging as it Relates to Core Storage and Preservation What follows is an attempt to synthesize current information from a wide variety of sources into a useful guide to methods of core storage and preservation. It must be stressed that the focus of the packaging industry is twofold. The first is the relatively short term preservation of, mostly, food and medical products. The second is packaging for protection and display purposes. Clearly, neither of these industries address the specific needs and requirements of IODP, so we must be creative and eclectic in our selection of the most suitable products for our application. Moreover, we must be actively involved in the research, testing and development of new products and methods by partnership/involvement with other institutions, so that IODP can be at the forefront of this technology as befits our ethos. Section 1 - Vacuum Packaging Vacuum packing (or vacuum sealing) is a form of packaging that involves the removal of air (and sometimes its replacement) from a pouch or plastic container. Vacuum packaging provides several benefits: protection against dehydration; barrier against air or moisture; tamper evident protection; compressed packaging for fragmented cores; protection from dust and moisture. Types of Vacuum Sealing Equipment Non Chamber Vacuum Sealers These units vacuum and seal the pouches externally. Some units also come equipped with special external nozzles to allow for the vacuum packaging using plastic containers. Non Chamber Vacuum sealers are meant for low volumes, and are suitable for vacuum sealing products that have little or no moisture. However some units do have special collectors for products that have excess moisture.
    [Show full text]
  • Extrusion Coating Manufacturing of Beverage Containers, Packaging Foils, and Other Multi-Layer Packing Materials
    Raytek Application Note 1 Extrusion Coating Manufacturing of beverage containers, packaging foils, and other multi-layer packing materials How can you detect waving edges and temperature gaps in * Q the plastic film during the extrusion coating process? How can proper web temperatures for strong film-to-paper Question adhesion be insured? Situation Analysis A The packaging material for carton based packages is composed of a laminate of paper, polyethylene and aluminium foil. Paper makes the packages stiff. Plastic Answer renders them liquid-tight, and aluminium foil blocks out light and oxygen. The Polyethylene feeds through several extruders at temperatures preferably of up to 320°C. The melt is fed over wide slot die and laminated onto the paper. Temperature and viscosity variations in the local melt streams across the width of an extruder flow channel can cause “waving” edges, gaps, and edge-tears in the extruded film. In practice already 10 K temperature difference influences adhesion between the Polyethylene layer and the paper and the Polyethylene film can tear off when feeding from the extruder die. The internal measurement of the melt temperature by use of thermocouples in the die is not representative for the temperature distribution in the Polyethylene film. With the increase of the production speed (up to 700 m/min), there is an increasing need for improved quality control to ensure the functionality of beverage packing. The linescanner MP150 monitors the Thermal image with horizontal profile and extruded film** “Automatic Sector” Solution and Improvements A The EC150 system is an automated surface inspection system for detecting, measuring, and classifying defects occurring in extrusion coating, co-extrusion and Answer laminating processes.
    [Show full text]
  • The Dynisco Extrusion Processors Handbook 2Nd Edition
    The Dynisco Extrusion Processors Handbook 2nd edition Written by: John Goff and Tony Whelan Edited by: Don DeLaney Acknowledgements We would like to thank the following people for their contributions to this latest edition of the DYNISCO Extrusion Processors Handbook. First of all, we would like to thank John Goff and Tony Whelan who have contributed new material that has been included in this new addition of their original book. In addition, we would like to thank John Herrmann, Jim Reilly, and Joan DeCoste of the DYNISCO Companies and Christine Ronaghan and Gabor Nagy of Davis-Standard for their assistance in editing and publication. For the fig- ures included in this edition, we would like to acknowledge the contributions of Davis- Standard, Inc., Krupp Werner and Pfleiderer, Inc., The DYNISCO Companies, Dr. Harold Giles and Eileen Reilly. CONTENTS SECTION 1: INTRODUCTION TO EXTRUSION Single-Screw Extrusion . .1 Twin-Screw Extrusion . .3 Extrusion Processes . .6 Safety . .11 SECTION 2: MATERIALS AND THEIR FLOW PROPERTIES Polymers and Plastics . .15 Thermoplastic Materials . .19 Viscosity and Viscosity Terms . .25 Flow Properties Measurement . .28 Elastic Effects in Polymer Melts . .30 Die Swell . .30 Melt Fracture . .32 Sharkskin . .34 Frozen-In Orientation . .35 Draw Down . .36 SECTION 3: TESTING Testing and Standards . .37 Material Inspection . .40 Density and Dimensions . .42 Tensile Strength . .44 Flexural Properties . .46 Impact Strength . .47 Hardness and Softness . .48 Thermal Properties . .49 Flammability Testing . .57 Melt Flow Rate . .59 Melt Viscosity . .62 Measurement of Elastic Effects . .64 Chemical Resistance . .66 Electrical Properties . .66 Optical Properties . .68 Material Identification . .70 SECTION 4: THE SCREW AND BARREL SYSTEM Materials Handling .
    [Show full text]
  • Basic Polymer Rheology, As Related to Extrusion Coating Machinery
    Basic Polymer Rheology, as related to Extrusion Coating Machinery David R Constant Battenfeld Gloucester Engineering Co. Inc. Gloucester, Massachusetts, USA Abstract LDPE remains the classic material of choice for many Extrusion Coating Applications, due to excellent processing and end-use performance reasons. High shear extrusion screws are desirable, actually promoting oxidation of the melt for improved adhesion to substrates. T-shaped flat die technology, with internal deckling, has emerged as the premium technology to handle monolayer and multilayer extrusion coating applications with LDPE and other polymers. But as with all technologies, remaining competitive means meeting demands for improved products, at higher rates and at lower cost. In this case this also means machinery suppliers need to understand machine “innovation’s” effects on the polymers. Higher rates cause higher “extension” of the melt from the die, which will affect melt orientation, neck-in, melt resonance and overall quality and productivity. Traditional measurements of Melt Index do not quantify effects on the polymer and the process. Measurements of melt strength, or melt elasticity are therefore necessary as a Q.C. tool for existing operations and for design reasons for new equipment. Introduction Extrusion coating and extrusion lamination are important conversion processes for the production of many packaged food or industrial products. Extrusion coating involves application of a molten layer of polymer, usually low density polyethylene (LDPE), acid copolymers like ethylene acrylic acid (EAA) or ethylene methyl acrylate (EMA), and “newer, modified” LLDPEs to a substrate such as paper, paperboard, aluminum foils and various other polymers such as oriented polypropylene (OPP) or oriented polyethylene terephthalate (OPET).
    [Show full text]
  • 8 Paper and Paperboard Packaging M.J
    8 Paper and Paperboard Packaging M.J. Kirwan 8.1 INTRODUCTION A wide range of paper and paperboard is used in packaging today – from lightweight infusible tissues for tea and coffee bags to heavy duty boards used in distribution. Paper and paperboard are found wherever products are produced, distributed, marketed and used, and account for about one-third of the total packaging market. Over 40% of all paper and paperboard consumption in Europe is used for packaging and over 50% of the paper and paperboard used for packaging is used by the food industry. One of the earliest references to the use of paper for packaging food products is a patent taken out by Charles Hildeyerd on 16 February 1665 for ‘The way and art of making blew paper used by sugar-bakers and others’ (Hills, 1988). The use of paper and paperboard for packaging purposes accelerated during the latter part of the nineteenth century to meet the needs of manufacturing industry. The manufacture of paper had progressed from a laborious manual operation, one sheet at a time, to continuous high speed production with wood pulp replacing rags as the main raw material. There were also developments in the techniques for printing and converting these materials into packaging containers. Today, examples of the use of paper and paperboard packaging for food can be found in many places, such as supermarkets, traditional markets and retail stores, mail order, fast food, dispensing machines, pharmacies, and in hospital, catering and leisure situations. Uses can be found in packaging all the main categories of food, such as: r dry food products – cereals, biscuits, bread and baked products, tea, coffee, sugar, flour, dry food mixes, etc r frozen foods, chilled foods and ice cream r liquid foods and beverages – juice drinks, milk and milk derived products r chocolate and sugar confectionery r fast foods r fresh produce – fruit, vegetables, meat and fish Packaging made from paper and paperboard is found at the point of sale (primary packs), in storage and for distribution (secondary packaging).
    [Show full text]