Company Profile and Capability Statement

Home , Dukhan, Halul Island

Surtech International Limited-Qatar “Specialised Surveying Solutions” 3D Laser Scanning - Dimension Control Surveys - GPS Positioning - Topographic & Construction Surveys

Surteqa S.P.C. Formerly Surtech International Limited - Qatar CR 29677

COMPANY PROFILE AND CAPABILITY STATEMENT

- 3D Laser Scanning - BIM Surveys - Dimension Control Surveys - GPS Positioning - Topographic / Contour Surveys - Volume Surveys - Construction Surveys - Cadastral – Boundary Surveys - Bathymetric / Hydrographic Surveys

8th Floor, Office # 1, Alaqaria Tower, Building No. 34 Al Muthaf Street (Museum Street), Old Salata Area.

PO Box 8822, Doha, State of Qatar. Tel : (974) 4450 7274 Fax : (974) 4451 6800

Jun 2014 س. ت. C.R. No. 29677 77622 ر ص.ب. ۲۲۸۸ الدوحة –ق P.O Box: 8822 – DOHA – QATAR تليفون :Tel: +974 44507274 (974) 4450 7274 فاكس: Fax: +974 4451 6800 (974) 4451 6800 بريد الكتروني: Email: [email protected] [email protected]

Surtech International Limited-Qatar “Specialised Surveying Solutions” 3D Laser Scanning - Dimension Control Surveys - GPS Positioning - Topographic & Construction Surveys

TABLE OF CONTENTS:

BRIEF OVERVIEW

CAPABILITY STATEMENT  MAJOR COMPLETED & ONGOING PROJECTS  PERSONNEL  ORGANISATION CHART  SURVEYING SERVICES  EQUIPMENT & SOFTWARE

3D LASER SCANNING

OFFICE LOCATION MAP

COMMERCIAL REGISTRATION

MMUP REGISTRATION

MUNICIPALITY LICENCE

KAHRAMAA APPROVAL FOR TOPOGRAPHIC SURVEY

س. ت. C.R. No. 29677 77622 ر ص.ب. ۲۲۸۸ الدوحة –ق P.O Box: 8822 – DOHA – QATAR تليفون :Tel: +974 44507274 (974) 4450 7274 فاكس: Fax: +974 4451 6800 (974) 4451 6800 بريد الكتروني: Email: [email protected] [email protected] SURTEQA S.P.C. Formerly Surtech International Limited Qatar W.L.L.

3D Laser Scanning - Dimension Control Surveys - GPS Positioning - Topographic & Construction Surveys ______

Overview:

Surteqa S.P.C., formerly Surtech International Limited – Qatar, is a surveying consultancy based in Doha. We provide “Specialised Surveying Solutions” to Clients primarily in the Real Estate, Construction, Oil & Gas and Mining industries. Our Doha Office was opened early in 2006. Our Surveying services include:

 Topographic – contour surveys, earthworks volume computation, 3D Digital Terrain Modelling, infrastructure mapping, underground services detection;  Engineering and Construction – setting out for buildings, infrastructure, roads, railways, process plants, power lines, pipelines, as-built drawings;  Cadastral - marking of land parcel boundaries to General Survey Office Specifications and Requirements; pipeline and power line corridors;  GPS Geodetic Control - Precise control surveys, project datum and reference systems, establishment of GPS Base Stations; transform data from local grid to national or project datum, advice on survey control and mapping requirements for the various stages of project development;  Audit of Project Survey Systems and Procedures – Check contractors control & setting out, 3rd Party QA/QC;  Bathymetric (Hydrographic) – seabed, sub-sea pipeline & cable route mapping, marinas, harbour & port development, oil/gas platforms, navigational hazard mapping, jetty / mooring depths – in association with Clydeside Surveys WLL;  3D Laser Scanning (3DLS) – development of accurate 3D Point Clouds & full scale as-built CAD models for offshore platforms, refineries, process plants, heritage buildings, etc.;  Dimension Control – accurate as-built of complex steel and concrete structures; accurate piping spool and tie-point surveys, eliminate/reduce field welds for faster shutdowns, hook-ups and replacement.

SURTEQA S.P.C. is a Registered Class A Surveying Consultancy by the Ministry of Municipality and Urban Planning Professional Engineering Committee. Our Senior Surveyors are MMUP Registered Class 1 Survey Engineers. Offshore crews have full OPITO Approved T-BOSIET, HUET, H2S Training.

Contact:

Arturo Tenorio, Survey Manager, a Class A MMUP Registered Civil Engineer Surveyor, has more than 25 years experience as a professional Engineer in the Civil and Survey Field, also an active member of PICE (Philippine Institute of Civil Engineers).

Telephone: +974 4450 7274 Facsimile: +974 4451 6800 Mobile: +974 6672 3579 Email: [email protected]

8th Floor, Office # 1, Alaqaria Tower, Building No. 34 Al Muthaf Street (Museum Street), Old Salata Area. PO Box 8822 Doha, State of Qatar

Directly above Doha Bank, opposite Doha City Mall.

SURTEQA S.P.C. Formerly Surtech International Limited Qatar W.L.L.

3D Laser Scanning - Dimension Control - GPS Positioning - Topographic - Construction - Cadastral Surveys ______

5th June 2014 Our Ref: SS 000/Corr/CS/201404

س. ت. C.R No. 29677 29677 ص.ب. ۲۲۸۸ الدوحة –قطر P.O Box: 8822 – DOHA – QATAR تليفون: Tel: +974 4450 7274 (974) 4450 7274 فاكس: Fax: +974 4451 6800 (974) 4451 6800 بريد الكتروني: Email: [email protected] [email protected] CAPABILITY STATEMENT The information below provides an overview of our Company, Surteqa S.P.C., formerly Surtech International Limited - Qatar, substantiating our capabilities and expertise to competently execute assignments to industry acceptable standards.

Surteqa is Registered as a Class A Surveying Consultancy by the Ministry of Municipality and Urban Planning Professional Engineering Committee.

Based in Doha, State of Qatar, we provide “Specialised Surveying Solutions” to Clients primarily in the Engineering Consultancy, Construction, Real Estate, and the Oil & Gas industries. Projects have been undertaken throughout the GCC including UAE, Saudi Arabia, Oman, Yemen and Qatar.

In 2005 we established as a separate Company with our Qatari Partner Mr Adel Al-Darwish. In February 2006 we commenced a permanent presence in Qatar from where we provide our Services to the Gulf Region. In 2011 Mr Al Darwish acquired 100% of the shareholding of Surteqa.

MAJOR COMPLETED AND ONGOING PROJECTS:  Topographic survey of 16 kilometres of highway between Al-Wakra and Mesaieed;  3D Laser Scanning and 3D As-Built Modelling of 58 offshore platforms Saudi Arabia;  3D Laser Scanning and Dimension Control Surveys for Maersk Oil Qatar offshore platforms;  GPS Base Station at Ras Laffan for positioning of umbilical cables for Dolphin Project;  Surveying Consultancy Services for Al Shaqab Equestrian Centre, Qatar Foundation;  Topographic survey of part of Dukhan Highway to determine progress earthworks volumes;  Topographic surveys, setting out and volume calculations for BARWA Trucking Facility at Doha Industrial Area for KBAS;  Independent Surveying Consultant to Qatalum Aluminium Project at Mesaieed;  Offshore Piling setting out and monitoring at Ras Laffan Port for Common Sulfur Plant, Qatargas II, Fire Water Intake Structure;  Topographic survey of Doha Golf Course to assist redesign;  Vertical Alignment Survey during installation of large 40 metre high vessel at QAPCO;  3D Laser Scanning and 3D As-Built Modelling of numerous ADMA OPCO offshore platforms in UAE;  3D Laser Scanning and 3D As-Built Modelling of Waste Water Treatment Plant at QChem Facility, Mesaieed;  3D Laser Scanning and Dimension Control Surveys to assist fabrication of 4 x offshore jackets at QCON Yard Mesaieed;  Bathymetric Survey of QCON Jetty and approaches, Mesaieed Port;  3D Laser Scanning of offshore platforms for Occidental Petroleum Qatar Limited – AMEC Blackcat (ONGOING);  Topographic and Underground Services Survey at Doha International Airport Arrivals and Departures to assist expansion design using Ground Penetrating Radar;  Surveys at Ras Laffan to assist EPC of QatarGas Common VOC Project Phase 1 for QCON;  Topographic survey of 9 kilometres of existing gravel road, highway and open terrain for new truck route Mesaieed – Gulf Consolidated Contractors / Wade Adams;  Dimension control survey for erection of steel building structure at GE Training Centre, Education City;

SS 000 Surteqa Capability Statement 201406.docx Page 1 of 5

SURTEQA S.P.C. Formerly Surtech International Limited Qatar W.L.L.

3D Laser Scanning - Dimension Control - GPS Positioning - Topographic - Construction - Cadastral Surveys ______

 Calculations and formation of Digital Terrain Model to determine earthworks volumes at Qatar University;  Bathymetric survey in West Bay Doha for expansion of Intercontinental Hotel breakwaters;  Topographic and Underground Services survey part of Qatar Petroleum EPIC Tariq Street, Halul / Hamid Junction Modifications at Ras Laffan – GC08111300 – Gulf Consolidated Contractors / Wade Adams;  Topographic and Underground Services survey of ABM Military College, Al Shahaniyah - Private Engineering Office;  Topographic surveys of numerous remote Military Security sites in Doha and along Qatar/KSA Border for NSS Project - SMEC/Private Engineering Office/EADS;  Bench Mark establishment, Topographic, Setting-out & As-built surveys at Al Udeid Air Base, Qatar;  Dimension Control Survey of critical tie-points at RasGas LNG Berth and check spool dimensions in Madina RLIC fabrication yard for various modifications to 24” an 30” lines;  Boundary, Topographic and Underground Services Surveys or approximately 20 kilometres of new service corridor roads at Ras Laffan RLIC for GCC – GC08115900 – GCC / Wade Adams;  Dimension Control Survey of critical tie-points at ORYX GTL and 3D Laser Scanning to deliver Point Cloud Database to Ramboll Engineering;  3D Laser Scanning and 3D As-Built Modelling of Scrub Column Unit at RasGas Facility, Ras Laffan;  Surveys of complex curved walls at Emiri Terminal and Public Mosque steel roof structures at NDIA;  Topographic surveys for design and construction of 70 kilometres of QP pipeline routes between Umm Babb and Dukhan for KEO – GC1010100;  Topographic surveys for design of optic fibre cable routes in Mesaieed and Dukhan for Cassidian (EADS) – NSS Project;  Topographic and underground services surveys to assist upgrading of QP Mesaieed Refinery drainage system – GC09100700.  Topographic surveys for re-design and construction of 15 kilometres of Sealine Road in Mesaieed for GCC – GC11103600;  Setting out of helipads and TOAL drawings at strategic locations throughout Qatar;  As-built and setting out surveys at NDIA for construction of Automated People Mover operating throughout Main Terminal Building;  Design and setting out of 105 kilometres of desert horse racing track at Al Hamla for Qatar Olympic Committee and Qatar Equestrian Endurance Committee;  As-built and setting out surveys for curtain wall erection of 9 building towers from 22 to 50 stories at Barwa Financial District, now QP District, West Bay – Jangho;  Survey for preparation of Civil Defence Safety Drawings for Movenpick Tower, Ramada Encore Hotel, Beverly Hills Tower, Regency Tower;  Bathymetric and Topographic surveys nt of coastal facilities at Sumaysimah and Zakhira - URBACON;  Topographic surveys for Design of new Lighthouse and Clinic Site at Halul Island – GC 11103900 - GHD;  Baseline survey for oil storage tank settlement at SEEF Mesaieed Refinery – LTC004/12;  Topographic survey of material stockpiles at Aljabor Cement Mesaieed to determine volumes for annual audit - ongoing;  Topographic survey of 60 process sites in Dukhan Field for design & construction of security barriers – GC 12101800 – Al Musairie;  Topographic and u/g services survey for new SHELL GTL Entry Facility at RLIC - Blackcat;  Topographic survey for 40 kilometre Fibre Optic Cable Route at Dukhan - DOPET;  Topographic and u/g services survey for proposed Emergency Equipment Storage and Equipment/Vehicle Inspection Facility in Dukhan – James Cubitt & Partners - ongoing;  As-built survey of perimeter fence and facilities at Hamad International Airport for Bureau Veritas;  Topographic & As-built surveys of 14 proposed KAHRAMAA Sub-station sites for SIEMENS - onging;  Strata Title surveys and preparation of Strata Plans for 400 apartments at Lusail for DAMAC - ongoing;  Topographic survey of new site at Ras Laffan for ORYX Energy Projects;  Setting out positions for seismic survey at Ras Laffan for Schlumberger;  Setting out and as-built surveys of new housing and infrastructure at Sidra Village for Sinohydro – ongoing;  Dimension Control surveys for fabrication & installation of complex steel stadium building elements – NUROL – ongoing.

SS 000 Surteqa Capability Statement 201406.docx Page 2 of 5

SURTEQA S.P.C. Formerly Surtech International Limited Qatar W.L.L.

3D Laser Scanning - Dimension Control - GPS Positioning - Topographic - Construction - Cadastral Surveys ______

1.0 KEY PERSONNEL

Key personnel in the Surteqa organization include:

Turgay Ceylan – Director Arturo Tenorio – Survey Manager - Surveyor Class 1, Edgardo Alvarez – Senior Surveyor Class 1, Teodorico Macaraig – Senior Surveyor Class 1, Gari Lee Afiler – IT/CAE/CAD Specialist, Valliappan Lakshmanan – Finance Manager, Liza Ramirez – Office Administrator.

Surteqa is Registered by the Professional Engineering Committee of UPDA / MMUP and General Survey Department as a Class A Surveying (Survey Engineering) Consultancy. Surteqa presently employs a staff of 25 surveyors and support personnel and is continually increasing these numbers to meet the demand from existing and new Clients. Three of our Senior Surveyors are registered as Class 1 Survey Engineers.

2.0 SURTEQA CORPORATE ORGANISATION

Surteqa S.P.C.

Turgay Ceylan Finance Manager Office Administrator

Valliappan L. Liza Ramirez Director

Survey Manager DP Coordinator Arturo Tenorio Gari Lee Alfiler

Surveyors Senior Surveyors Survey Assistants Survey Drafters

SS 000 Surteqa Capability Statement 201406.docx Page 3 of 5

SURTEQA S.P.C. Formerly Surtech International Limited Qatar W.L.L.

3D Laser Scanning - Dimension Control - GPS Positioning - Topographic - Construction - Cadastral Surveys ______

3.0 SURVEYING SERVICES

Surteqa undertakes the following types of surveys:

1. Topographic:  Digital terrain modeling using conventional total stations, kinematic GPS data acquisition techniques. Production of computer generated contour and detail drawings for the design of infrastructure, factories, commercial buildings, resort and real estate developments.  Computer generated 3D visualization of digital terrain models to assist Engineers, Architects and Planners in the design of infrastructure, construction, resort and real estate projects.

2. GPS Geodetic Control:  Precise control surveys for project development, photogrammetric and ALS mapping.  Spatial control for gravity and magnetometer surveys.  Rationalization, integration and resolution of project datum and reference systems.

3. Engineering/Construction:  Survey of infrastructure facilities, roads, railways, overland conveyors, process plants, power transmission lines and oil/gas pipelines.  Route location surveys & earthworks design of transport facilities for feasibility studies through to final design and construction stages.  Earthwork quantity computations for planning and progress certificates.  Optimization of existing road, railway and overland conveyor alignments.  Setting out of works.  As built surveys.

4. 3D Laser Scanning (3DLS) & BIM: 3D Laser Scanning is a revolutionary surveying technique that employs reflected laser beams to create dimensionally accurate as-built 3D digital models of existing structures. Surteqa is the first Surveying Company to import and base a High Speed 3D Laser Scanner permanently in Qatar. Laser Scanning is a highly proven technology highly suited to construction BIM and petrochemical industries, especially for refit/revamp/upgrade/critical tie-in positioning, whether onshore or offshore platforms, and provides:  Existing Condition As-built and BIM surveys using 3D Laser Scanners,  Generation of consolidated 3D Point Cloud Databases,  Clash Checking/Reporting between Design Model and As-built Survey;  Development of CAD ready As-built 3D digital models from 3D Laser Scanning Data.

5. Cadastral:  Establishment and marking of land parcel boundaries and contract of work boundaries.  Boundary definition of land acquisition for compensation purposes.  Strata Title and Lease surveys and preparation of plans for lodgment at the Ministry of Municipality and Urban Planning General Survey Department.  Transforming data from local grid to project grid or Qatar National Grid.  Advise on survey control and mapping requirements for the various stages of project development.

SS 000 Surteqa Capability Statement 201406.docx Page 4 of 5

SURTEQA S.P.C. Formerly Surtech International Limited Qatar W.L.L.

3D Laser Scanning - Dimension Control - GPS Positioning - Topographic - Construction - Cadastral Surveys ______

6. Hydrographic:  Mapping of seabed in coastal areas and rivers including tide and current measurements.  Bathymetric surveys for marinas, port developments, oil/gas platforms, offshore pipeline and cable routes, and navigational hazard mapping.

7. Dimensional Control (DC): Use of specialist surveyors, precise surveying instruments and purpose-written software to accurately measure existing flanges and pipe routes for hook-up and replacements:  Accurate tie-point coordinates to raised face of flange,  Flange angulations in two planes, Bolt hole rotations from vertical or grid,  Red line mark-ups of design drawings,  Check fabricated spools in workshop before shipping to ensure compliance with design,.  Reduce/eliminate field welds.

All surveying work is carried out to established and internationally accepted surveying standards and is backed up by our Integrated Management System (IMS) and training programs.

4.0 EQUIPMENT AND SOFTWARE

Equipment:  Trimble R8, 5700 and Sokkia GRX2 Dual Frequency Precise GPS receivers;  Z+F Imager 5003 and 5006h High Speed 3D Laser Scanners;  Leica TC 800, TCR 800 & TS-06 Electronic Total Stations  Leica Optical Automatic and Electronic Digital Levels & WILD Precision Tilting Level;  Hilger & Watts Autoplumb Optical Plummet;  C-Scope Cable Avoidance Tool / Underground Electrical Services Scanner  Desk/Laptop Computers  Printers & Plotters

Software:  LFM 3D Laser Scan processing suite  Terramodel Surveying and Civil Engineering suite  Magnet Field GPS processing suite  QTrans Geodetic Transformation suite  Trimble Geomatics Office & GPS processing suite  Accura “Best Fit” Dimension Control processing suite

This information is provided to enable prospective Clients to assess the overall expertise and capability of Surteqa operations.

Yours sincerely,

Arturo Tenorio Survey Manager Surteqa S.P.C. Formerly Surtech International Limited S.P.C. Mobile: +974 66723579- Email: [email protected] [email protected]

SS 000 Surteqa Capability Statement 201406.docx Page 5 of 5 SURTEQA S.P.C. Formerly Surtech International Limited Qatar W.L.L.

3D Laser Scanning - Dimension Control - GPS Positioning - Topographic - Construction - Cadastral Surveys ______

3D LASER SCANNING

With the current demand for quick turnaround to modify and upgrade existing production and process facilities, accurate as-built information is more vital than ever before.

High speed 3D Laser Scanning is a widely used and proven technique for as-built surveys. It is more accurate, much quicker, and delivers far better and more complete results with greater precision than traditional manual measuring. A continuous laser beam takes very closely spaced XYZ measurements over the visible surfaces of the target structures. When viewed on the computer screen this appears as a cloud- like image of the structure, which is known as a “point cloud”.

3D Laser Scanning advantages: • Proven Technology – Z+F Imager 5003 & 5006h 3D Scanners • More accurate than manual measurement • Full sphere 360 degree scanning with each scan • Completeness - more information – faster - safer • Less time, no return visits for missed measurements • All disciplines can use the data • Safely work from ground, walkways, decks • Data matches facility coordinate system • Day and night work without special lighting • Clash check design against actual • Confidence in fit-ups / hook-ups • Reduce / eliminate field welds • Reduce / eliminate hot works and field modifications

Large field of view simultaneously captures overhead detail without the use of special scaffolding e.g.: pipe work, equipment, structure, cranes, etc. This greatly reduces the safety risks as surveyors are not exposing themselves by working from potentially dangerous elevated scaffold or ladders. Overall accuracy can be within 5 millimetres.

Where 3D Laser Scanning is used: • Refineries • Process Plants • Offshore Platforms • FPSO Conversions • Power Stations • Smelters & Steel Works • Nuclear Plants • Infrastructure – bridges, highways, railways, tunnels • Architecture • Heritage Sites

Plant designers are able to work directly in their normal 3D CAD environment. No more sorting through dozens of outdated, and probably inaccurate, 2D drawings, they work more efficiently, more effectively and with the confidence that what they design will be correct.

More accurate design = better fabrication and direct fit-up.

No more field welds

3D Laser Scanning - Dimension Control - GPS Positioning - Topographic - Construction - Cadastral Surveys ______

3D LASER SCAN DELIVERABLES To fully utilise the results obtained from 3D Laser Scanning, the data can be delivered in 3 main formats:

3D POINT CLOUD: Quickly delivered shortly after completion of the field survey, the results from numerous scans, from 2 to many 100’s, can be consolidated into a single 3D Point Cloud database. Suitably experienced designers can work directly in their design environment using the point cloud as a “legacy data” background.

 Ideal for preliminary planning and routing of new works  Clash checking of pre-design can be immediately undertaken and modified  Tie-points can be identified and coordinates obtained

BUBBLE VIEWS: Using inexpensive LFM software and unique to Z+F Laser Scanners this allows photographic quality visualisation of the full sphere obtained from each individual scan.

 Take accurate measurements directly  Obtain pipe diameters  Clearance pipe to pipe  Visualise design elements in the image of the existing structure

3D CAD MODELS: We have our own in-house 3D Modelling capability based in our Doha office. Using Z+F LFM Modeller and Server software our crew of experienced drafter/modellers convert the 3D Laser Scan images into Virtual Reality 3D CAD models, which can be imported into any of the major CAD systems that you use.

3D CAD Models enable your engineers and designers, from all disciplines, to fully examine complex as-built structures, with completeness far surpassing anything previously possible. Vast quantities of high integrity digital data are readily available.

Import 3D Models into all major CAD systems including: • AutoCAD • AutoPLANT • MicroStation V7, V8, V8i, XM • PDS • PDMS • PlantSpace • Walkinside

3D Laser Scanning and 3D CAD Models bring the plant to the engineers’ and designers’ desktops.

Surteqa 3DLS 201406.docx Page 2 of 2 miles 1 km 1

Surtech International Limited-Qatar “Specialised Surveying Solutions” 3D Laser Scanning - Dimension Control Surveys - GPS Positioning - Topographic & Construction Surveys

8th Floor, Office # 1, Alaqaria Tower, Building No. 34 Al Muthaf Street (Museum Street), Old Salata Area.

PO Box 8822, Doha, State of Qatar. Tel : (974) 4450 7274 Fax : (974) 4451 6800

س. ت. C.R. No. 29677 77622 ر ص.ب. ۲۲۸۸ الدوحة –ق P.O Box: 8822 – DOHA – QATAR تليفون :Tel: +974 44507274 (974) 4450 7274 Jun 2014فاكس: Fax: +974 4451 6800 (974) 4451 6800 بريد الكتروني: Email: [email protected] [email protected]