DOCSLIB.ORG

How Business Flies Safran Overview

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
How Business Flies Safran Overview HOW BUSINESS FLIES SAFRAN OVERVIEW PROPULSION SYSTEMS Safran Aircraft Engines Safran Nacelles SAFRAN IS AN INTERNATIONAL HIGH-TECHNOLOGY GROUP, OPERATING IN THE AVIATION (PROPULSION, Safran Transmission Systems EQUIPMENT AND INTERIORS), DEFENSE AND SPACE MARKETS. ITS CORE PURPOSE IS TO CONTRIBUTE TO A SAFER, MORE SUSTAINABLE WORLD, WHERE AIR TRANSPORT IS MORE ENVIRONMENTALLY FRIENDLY, COMFORTABLE AND ACCESSIBLE. SAFRAN HAS A GLOBAL PRESENCE, WITH 81,000 EMPLOYEES AND HOLDS, ALONE OR IN ELECTRICAL POWER SYSTEMS PARTNERSHIP, WORLD OR REGIONAL LEADERSHIP POSITIONS IN ITS CORE MARKETS. SAFRAN UNDERTAKES Safran Electrical & Power RESEARCH AND DEVELOPMENT PROGRAMS TO MAINTAIN THE ENVIRONMENTAL PRIORITIES OF ITS R&T AND Safran Power UnitsAL INNOVATION ROADMAP. LANDING AND BRAKING SYSTEMS 81,000 #1 WORLDWIDE EMPLOYEES Safran Landing SystemsCAL AEROSPACE: WORLDWIDE • ENGINES FOR SINGLE-AISLE COMMERCIAL JETS AVIONICS SYSTEMS in (in partnership with GE) Safran Electronics & DefenseAL 30 • HELICOPTER TURBINE ENGINES COUNTRIES • LANDING GEAR • WHEELS AND CARBON BRAKES(1) CABIN INTERIORS & SEATS 7% • ELECTRICAL WIRING OF SALES INVESTED Safran Cabin €24.6 • HELICOPTER FLIGHT CONTROLS IN R&D BILLION IN SALES Safran Passenger Solutions • NACELLE SYSTEMS FOR BUSINESS JETS generated in 2019 Safran applies a strategy based Safran Seats • LATERAL PARTITION PANELS, CARTS, on innovation and continuous CONTAINERS AND CABIN INTERIORS FOR REGIONAL AND BUSINESS AIRCRAFT improvement in competitiveness, ONBOARD SYSTEMS • EVACUATION SLIDES AND OXYGEN working closely with our suppliers and SYSTEMS partners to address today’s economic, Safran Aerosystems • ONBOARD WATER AND WASTE societal and environmental challenges. MANAGEMENT SYSTEMS Photo credits: p. 4: Master Image, Pierre Soissons/Safran, Christian Fleury/CAPA Pictures/Safran - p. 5: Safran - p. 6: Adrien Daste / Safran - p. 9: Antoine Denoix/Safran, 1 Molyneux/Safran, Pierre Soissons/Safran, Frank Rogozienski / CAPA Pictures / Safran - p. 10 & 11: Edward Linsmier/CAPA Pictures/ Safran - p. 12: Thomas Garza/Safran, Mainline commercial jets with more than 100 seats. Daniel Linares/Safran, Éric Drouin, Safran - p. 14: Bombardier - p. 15 Adrien Daste/Safran - p. 16: Cyril Abad / CAPA Pictures / Safran, Edward Linsmier / CAPA Pictures / Safran - p. 17: Christel Sasso / CAPA Pictures / Safran - p. 18: Christian Fleury/CAPA Pictures/Safran. 2 3 Commercial Aircraft Engines GREEN SAFRAN (including FADEC engine control units) INNOVATION By investing IN BUSINESS AVIATION Auxiliary Power Unit in integrated propulsion systems, Cabin Interiors FROM NOSE-TO-TAIL “more electric” aircraft, Power Transmission Galleys and operational fuel efficiency (software and consulting), WITH DECADES OF EXPERIENCE IN AVIATION, Electrical Systems Safran meets SAFRAN MASTERS THE TECHNOLOGIES THAT MAKE AIRCRAFT the market’s current Avionics Systems and evolving OF ALL SIZES FLY— FROM LARGE AIRLINERS TO HELICOPTERS Safety (including cockpit requirements in terms Custom Systems Cabin controls and cockpit AND BUSINESS JETS. of reliability Complete Nacelles (rafts, Integration and environmental & lighting systems) life vests) standards. AN UNMATCHED OFFERING FOR BUSINESS AVIATION CUSTOMER SUPPORT GUARANTEED Fuel Management Systems Business jet manufacturers can rely on Safran for their Safran has a global customer service Control Systems equipment needs ranging from engines, nacelles, thrust network that provides after-sales and Fly-by-Wire Flight Control Systems reversers, power transmissions, auxiliary power units, customer support, as well as maintenance, (including cabin controls and fuel) electrical power management systems, to landing repair and overhaul services for its business Crew Seats gear, wheels, brakes, cabin interiors, water and waste aviation customers. Fluid and Water & Waste Management management systems, navigation systems, flight Braking and Landing Systems monitoring solutions and flight controls. Oxygen Systems (crew and passengers) 4 5 PROPULSION SYSTEMS POWERING BUSINESS JETS SAFRAN PROVIDES BUSINESS AIRCRAFT MANUFACTURERS WITH ENGINES AND NACELLES SEPARATELY OR AS AN INTEGRATED PROPULSION SYSTEM. ENGINES NACELLES INTEGRATED Our technological excellence results from Safran is one of the main worldwide PROPULSION SOLUTIONS decades of experience integrators of aircraft engine nacelles for the With these combined capabilities, Safran is as an engine manufacturer. business jet market. The nacelle is a major pioneering a new generation of integrated We cover the entire lifecycle of business system that uses high technology equipment propulsion systems for business jets with jet engines from design, development and to reduce fuel consumption, improve enhanced performance, reliability, cost- testing, to production, sales and support. performance and facilitate maintenance effectiveness and environmental-friendliness. on the engines. With the use of composite materials or material alloys, extensive POWER TRANSMISSION acoustic treatments as well as aerodynamic design, the nacelle is lighter and reduces SYSTEMS Safran produces mechanical power engine noise emission. transmission systems that ensure optimized size, weight and cost of the overall system. The power transmission system transfers mechanical power from jet engine to aircraft #1 WORLDWIDE #1 WORLDWIDE and engine equipment, including starter, IN ENGINES FOR NACELLES electrical power generator and fuel pump, for single-aisle commercial jets on top-of-the-line business jets that are essential for successful operation. (in partnership with GE) MORE THAN 110 YEARS 30 YEARS OF AIRCRAFT ENGINE OF EXPERIENCE EXPERTISE in manufacturing nacelles CUSTOMERS: • Bombardier • Gulfstream • Dassault Aviation • Textron Aviation • Embraer • Boeing 6 7 ELECTRICAL POWER SYSTEMS INNOVATING FOR “MORE ELECTRIC” BUSINESS AIRCRAFT INTEGRATED SOLUTIONS AND SERVICES ALL ONBOARD Main Electrical Generation ELECTRICAL FUNCTIONS Wiring As a recognized expert in aircraft electrical AUXILIARY POWER systems, Safran covers UNITS Electrical Thrust Reverser all onboard electrical Safran has engineered a full Actuation System APU Electrical functions, including range of power units for Power Generation Generator starter generation, distribution, business aviation. conversion, electrical wiring The SPU300 is a state-of-the- interconnection systems, Primary Distribution “MORE ELECTRIC” art power source designed for Cargo ventilation load management, systems AIRCRAFT long range, high performance integration, filtration, and We are fully committed to business jets. The SPU150 ventilation. Conversion developing electrical aircraft is the definition of reliability systems and equipment and cost effectiveness for the midsize to super midsize Secondary Distribution to meet the economic and environmental challenges segments. The eAPU has facing our customers. been designed to meet the Our consolidated offering highest requirements of positions us as a world leader “more electric” aircraft. Avionic ventilation Emergency in power systems for “more Electrical Power Generation (RAT) electric” aircraft. Opening and Closing of the Landing Gear Doors Electrical Braking System CUSTOMERS: A WORLD • Bombardier LEADER • Dassault Aviation POWER & PRIMARY & ELECTRICAL WIRING VENTILATION #1 WORLDWIDE #2 WORLDWIDE IN APUS FOR BUSINESS JETS, • Embraer DATA SECONDARY EQUIPMENT IN AIRCRAFT ELECTRICAL IN ELECTRICAL HELICOPTERS AND MILITARY • Textron Aviation GENERATION DISTRIBUTION INTERCONNECTION SYSTEMS POWER & DATA GENERATION AIRCRAFT 8 9 LANDING AND BRAKING SYSTEMS INTEGRATION HELPING BUSINESS JETS TAKE OFF AND LAND AS A WORLD LEADER IN THE DESIGN, DEVELOPMENT, MANUFACTURE AND SUPPORT OF AIRCRAFT LANDING AND BRAKING SYSTEMS, SAFRAN BRINGS OVER FIVE DECADES OF EXPERIENCE TO BUSINESS JET PLATFORMS. Combining advanced engineering, integrated systems technology PROVIDING SUPPORT and in-depth service TO MORE THAN experience, we deliver 5,700 cost-efficient solutions BUSINESS JETS to the world’s leading in service business jet manufacturers. Our offering includes Our focus is to ensure landing gear, landing gear that the future generation extension and retraction of landing and braking WORLD systems, monitoring systems are not only LEADER systems, steering systems, reliable and easy to IN AIRCRAFT LANDING SYSTEMS braking systems, maintain, but lighter, and wheels and quieter, more cost-efficient brakes integration. and robust, ultimately providing overall value PIONEER across the full lifecycle of a AND WORLD CUSTOMERS: business jet program. • Bombardier LEADER IN CARBON BRAKES* • Daher • Dassault Aviation • Gulfstream • Piaggio * Mainline commercial jets with more than 100 seats. 10 11 #1 WORLDWIDE AVIONICS SYSTEMS IN ENGINE CONTROL UNITS INNOVATING FOR ENHANCED FLIGHT SAFETY for commercial aircraft, in partnership with BAE Systems SAFRAN’S COMPREHENSIVE AVIONICS OFFERING COVERS FLIGHT CONTROL SYSTEMS, ENGINE CONTROL SYSTEMS, FLIGHT DATA MANAGEMENT SYSTEMS AND NAVIGATION SYSTEMS. PIONEER IN FLIGHT DATA MANAGEMENT FLIGHT FLIGHT SYSTEMS CONTROL ACTIVE DATA AND SYSTEMS SIDE ANALYSIS AERONAUTICAL From throttle control STICK UNIT With Cassiopée, we MAINTENANCE assemblies and ENGINE offer a full, integrated SUPPORT By electronically actuators to sensors, CONTROL range of equipment connecting the illuminated switches, for the acquisition, aircraft’s side sticks, SYSTEMS and instrument panels management, recording this innovation will and displays, we As an expert in and analysis of flight provide pilots with develop and produce
Load more

Recommended publications
  • Effects of Aircraft Integration on Compact Nacelle Aerodynamics
    Eects of Aircraft Integration on Compact Nacelle Aerodynamics Fernando Tejeroa,∗, Ioannis Goulosa, David G MacManusa, Christopher Sheafb aCentre for Propulsion Engineering, School of Aerospace, Transport and Manufacturing, Craneld University, Bedfordshire, MK43 0AL bRolls-Royce plc., P.O. box 31, Derby, United Kingdom, DE24 8BJ Abstract To reduce specic fuel consumption, it is expected that the next generation of aero-engines will operate with higher bypass-ratios, and therefore fan diame- ters, than current in-service architectures. These new propulsion systems will increase the nacelle size and incur in an additional overall weight and drag con- tribution to the aircraft. In addition, they will be installed more closely-coupled with the airframe, which may lead to an increase in adverse installation eects. As such, it is required to develop compact nacelles which will not counteract the benets obtained from the new engine cycles. A comprehensive investigation of the eects of nacelle design on the overall aircraft aerodynamic performance is required for a better understanding on the eects of aero-engine integration. This paper presents a method for the multi-objective optimisation of drooped and scarfed non-axisymmetric nacelle aero-engines. It uses intuitive Class Shape Tranformations (iCSTs) for the aero-engine geometry denition, multi-point aerodynamic simulation, a near-eld nacelle drag extraction method and the NSGA-II genetic algorithm. The process has been employed for the aerody- namic optimisation of a compact nacelle aero-engine as well as a conventional nacelle conguration. Subsequently, the designed architectures were installed on a conventional commercial transport aircraft and evaluated at dierent in- stallation positions.
    [Show full text]
  • IIIHIHIIIHIIII O US005143329A United States Patent (19) 11 Patent Number: 5,143,329 Coffinberry (45) Date of Patent: Sep
    IIIHIHIIIHIIII O US005143329A United States Patent (19) 11 Patent Number: 5,143,329 Coffinberry (45) Date of Patent: Sep. 1, 1992 (54) GASTURBINE ENGINE POWERED AIRCRAFT ENVIRONMENTAL CONTROL FOREIGN PATENT DOCUMENTS SYSTEM AND BOUNDARY LAYER BLEED 0065855 5/1982 European Pat. Off. (75) Inventor: George A. Coffinberry, West Chester, g 32 E." Ohio 143598 4/1953 United Kingdom. (73) Assignee: General Electric Company, 744923 5/1954 United Kingdom. 774695 4/1955 United Kingdom . Cincinnati, Ohio 846358 6/1958 United Kingdom. 21 Appl. No.: 738,985 1530330 1/1976 United Kingdom . 202.7874 2/1980 United Kingdom ............. 24418.5 22 Filed: Aug. 1, 1991 2074654 4/1980 United Kingdom . 2076897 12/1981 United Kingdom ............. 244/118.5 Related U.S. Application Data 2127492 6/1983 United Kingdom . 62 Division of Ser. No. 531,718, Jun. 1, 1990. Primary Examiner-Joseph F. Peters, Jr. 5 Assistant Examiner-Christopher P. Ellis O2,207. Attorney, Agent, or Firm-Jerome C. Squillaro 244/53 R; 45.4/71 57 ABSTRACT 58) Field of Search ..................... 244/118.5, 207, 208, 244/209 53 R. 60/39. 142 39.07, 39.15, 39.183: An aircraft gas turbine engine is provided with a start s A 4-y 9. '987 ing air turbine that is directly connected through the starter gearbox to the high pressure (HP) shaft and is 56) References Cited provided with an apparatus to extract excess energy U.S. PATENT DOCUMENTS from engine compressor bleed air, return it to the en 2,734,443 2/1956 Wood ..................................... oss gine, and to start the engine with compressed air from 2,777,301 1/1957 Kuhn .....
    [Show full text]
  • Helicopter Safety November-December 1988
    F L I G H T S A F E T Y F O U N D A T I O N HELICOPTER SAFETY Vol. 14 No. 6 November/December 1988 Tiltrotor Offers A Choice Although the first flight of the V-22 Osprey tiltrotor has been delayed, the author has had the opportunity to fly Bell-Boeing’s simulator at Ft. Worth, Tex., U.S. Through his description of his simulator ride, it is apparent the tiltrotor will be a challenge for both fixed-wing and helicopter pilots. by Joe Mashman Bell Helicopter Textron, Inc. and Boeing Helicopter Com- Flying the Tiltrotor Simulator pany joined forces to develop the V-22 Osprey tiltrotor air- craft, based upon the Bell Model 301/XV-15, a two-seat tiltro- This pilot recently flew the Bell-Boeing engineering tiltrotor tor research aircraft. simulator, at Ft. Worth, Tex., U.S., and discovered the unique qualities of the tiltrotor aircraft. The all-composite (epoxy/graphite laminate) V-22 is 57.25 feet long and has a 46.5 foot wingspan. Its obstruction-free The simulator was configured with the U.S. Navy V-22 Os- cabin is 24 feet 2 inches long, 5 feet 11 inches wide and 6 feet prey control system and flight characteristics; the simulation high, and allows versatile configurations for personnel or called for 40,000 pounds maximum gross weight at sea level, cargo. Two Allison T406-AD-400 engines will deliver up to standard conditions. The handling qualities of the aircraft 6,150 shp to turn the two 38-foot diameter rotors.
    [Show full text]
  • Evaluation of V-22 Tiltrotor Handling Qualities in the Instrument Meteorological Environment
    University of Tennessee, Knoxville TRACE: Tennessee Research and Creative Exchange Masters Theses Graduate School 5-2006 Evaluation of V-22 Tiltrotor Handling Qualities in the Instrument Meteorological Environment Scott Bennett Trail University of Tennessee - Knoxville Follow this and additional works at: https://trace.tennessee.edu/utk_gradthes Part of the Aerospace Engineering Commons Recommended Citation Trail, Scott Bennett, "Evaluation of V-22 Tiltrotor Handling Qualities in the Instrument Meteorological Environment. " Master's Thesis, University of Tennessee, 2006. https://trace.tennessee.edu/utk_gradthes/1816 This Thesis is brought to you for free and open access by the Graduate School at TRACE: Tennessee Research and Creative Exchange. It has been accepted for inclusion in Masters Theses by an authorized administrator of TRACE: Tennessee Research and Creative Exchange. For more information, please contact [email protected]. To the Graduate Council: I am submitting herewith a thesis written by Scott Bennett Trail entitled "Evaluation of V-22 Tiltrotor Handling Qualities in the Instrument Meteorological Environment." I have examined the final electronic copy of this thesis for form and content and recommend that it be accepted in partial fulfillment of the equirr ements for the degree of Master of Science, with a major in Aviation Systems. Robert B. Richards, Major Professor We have read this thesis and recommend its acceptance: Rodney Allison, Frank Collins Accepted for the Council: Carolyn R. Hodges Vice Provost and Dean of the Graduate School (Original signatures are on file with official studentecor r ds.) To the Graduate Council: I am submitting herewith a thesis written by Scott Bennett Trail entitled “Evaluation of V-22 Tiltrotor Handling Qualities in the Instrument Meteorological Environment”.
    [Show full text]
  • GPO PRICE CFSTI PRICE(S) $ Hard Copy (HC)
    GPO PRICE $ CFSTI PRICE(S) $ Hard copy (HC)- Microfiche (MF) - NASA TM X-1683 WIND TUNNE IL INVESTIGATION OF AIRFRAME INSTALLATION EFFECTS ON UNDERWING ENGINE NACELLES AT MACH NUMBERS FROM 0.56 TO 1.46 By Bernard J. Blaha and Daniel C. Mikkelson Lewis Research Center Cleveland, Ohio NATIONAL AERONAUTICS AND SPACE ADMINISTRATION For sale by the Clearinghouse for Federal Scientific and Technical Information Springfield, Virginia 22151 - CFSTl price $3.00 ABSTRACT A 1/20 scale model of the F-106B with simulated underwing engine nacelles was tested in the Lewis Research Center 8- by 6-foot supersonic wind tunnel. Pressures and boattail drag coefficients were obtained on cone-cylinder and bulged nacelles with 15' conical boattail afterbodies and jet boundary simulators. Data were obtained with and without inlet airflow through the nacelles at attack angles from 0' to 8'. Effects of nacelle strut geometry, local elevon geometry, and elevon deflection were also investi- gated. The installed boattail pressure drag coefficient was lower than isolated nacelle values at all Mach numbers, and transonic drag rise was delayed to Mach 0.975. ii WIND TUNNEL INVESTIGATION OF AIRFRAME INSTALLAT~ONEFFECTS ON UNDERWING ENGINE NACELLES AT MACH NUMBERS FROM 0.56 TO 1.46 by Bernard J. Blaha and Daniel C. Mikkelson Lewis Research Center SUMMARY A test was conducted in the Lewis Research Center 8- by 6-foot supersonic wind tunnel utilizing a 1/20 scale model of the F-106B aircraft with simulated underwing en- gine nacelles. Pressures and boattail drag coefficients were obtained on cone-cylinder nacelles and on bulged nacelles, both with 15' conical boattail afterbodies and jet bound- ary simulators.
    [Show full text]
  • Airframe & Aircraft Components By
    Airframe & Aircraft Components (According to the Syllabus Prescribed by Director General of Civil Aviation, Govt. of India) FIRST EDITION AIRFRAME & AIRCRAFT COMPONENTS Prepared by L.N.V.M. Society Group of Institutes * School of Aeronautics ( Approved by Director General of Civil Aviation, Govt. of India) * School of Engineering & Technology ( Approved by Director General of Civil Aviation, Govt. of India) Compiled by Sheo Singh Published By L.N.V.M. Society Group of Institutes H-974, Palam Extn., Part-1, Sec-7, Dwarka, New Delhi-77 Published By L.N.V.M. Society Group of Institutes, Palam Extn., Part-1, Sec.-7, Dwarka, New Delhi - 77 First Edition 2007 All rights reserved; no part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of the publishers. Type Setting Sushma Cover Designed by Abdul Aziz Printed at Graphic Syndicate, Naraina, New Delhi. Dedicated To Shri Laxmi Narain Verma [ Who Lived An Honest Life ] Preface This book is intended as an introductory text on “Airframe and Aircraft Components” which is an essential part of General Engineering and Maintenance Practices of DGCA license examination, BAMEL, Paper-II. It is intended that this book will provide basic information on principle, fundamentals and technical procedures in the subject matter areas relating to the “Airframe and Aircraft Components”. The written text is supplemented with large number of suitable diagrams for reinforcing the key aspects. I acknowledge with thanks the contribution of the faculty and staff of L.N.V.M.
    [Show full text]
  • Boeing CLEEN II Program Update Compact Nacelle (CN)
    Boeing CLEEN II Program Update Compact Nacelle (CN) Consortium Plenary Session Jennifer Kolden May 13, 2020 Copyright © 2020 Boeing. All rights reserved. Approved for Public Release Compact Nacelle – Motivation General Engine Characteristics • 2025 EIS • Geared Low Pressure Ratio Fan • Bypass Ratio of 12 to 14 • Large Fan, Small Core • Core Mounted Accessories Nacelle Technologies Required Complete • PAI Optimization • Short Inlet (0.4 L/D or less) Current • Advanced T/R Configuration • Improved Acoustic Solutions • Advanced Manufacturing • New High-temp materials • Advanced Bleed Systems Copyright © 2020 Boeing. All rights reserved. Approved for Public Release 2 Compact Nacelle - Overview Short Inlet Aerodynamics Ground Test Ground Testing Reporting Flight Demonstration (RR FTB) 2017 2018 2019 2020 2021 Final Acquisition ATP PDR DDR S2F HW Flight Test Report of TR O/D Concept Dev H/W Dev FT & Rept Aft Fan Duct Acoustics noise reduction Copyright © 2020 Boeing. All rights reserved. Approved for Public Release Compact Nacelle (CN) – Aft Fan Duct Acoustics Anticipated Benefits: Acoustic Gloves • 0.4 to 1.2 EPNdB for future applications to UHB-configured aircraft entering service in Treated the 2025 time frame Blocker Doors Thrust Reverser Inner Wall • 0.2 to 0.6 EPNdB as retrofit potential for some existing models. Objectives: Accomplishments/Plan: • Develop acoustic treatment concepts for Surplus Hardware Obtained – 1Q ‘19 aft duct of compact nacelle architectures Concepts developed – 2Q ‘19 • Validate design concepts through flight Interim Project Phase Launched – Jul ‘19 ATP – Oct ’19 demonstration for transition to new and PDR – Oct ’19 existing products DDR – Jan ‘20 Engineering Complete – Mar ‘20 Work Statement: • H/W on Dock at Boeing Field – Q3 ‘20 • Develop prototype TR hardware • ecoD Flight Test – Q3 ’21 • Conduct flight demonstration on the • Limited Rights Flight Test Report – Q4 ‘21 • Public Test Report – Q4 ‘21 Boeing 737 Max 9 ecoDemonstrator • Program End – Q4 ‘21 Copyright © 2020 Boeing.
    [Show full text]
  • What's New In
    Design • Analysis • Research What’s New in AAA? Version 3.5.1 and Version 3.5 September 2013 AAA 3.5.1 contains various enhancements and revisions to version 3.5 and 3.4 as well as bug fixes. Section 1 shows the enhancements and modifications made to AAA. Major enhancements include new modules and calculations. The second section contains bug fixes. The AAA Manual describes the installation procedure and all modules. The manual is available in pdf format on the installation CD. What’s New in AAA 3.5.1? 1 1. Enhancements and Modifications – AAA 3.5.1 Differences between AAA 3.5.1 and AAA 3.5 are: 1. Cl and Cn have similar input/output parameters as Cl and Cn δrv δrv δr δr 2. The limits on material weight factors have been removed in Class II Weight. 3. The pylon root sweep angle can be defined. 4. Thrust from Drag in the Propulsion module is added to the Recalculate All module. 5. Cost Escalation Factor is updated through August 2013 6. The total wetted areas for nacelles, pylons, tailbooms, stores and floats are now calculated. 7. The airplane equivalent skin friction coefficient is now calculated based on airplane wetted area, C and wing planform area. Do 2. Enhancements and Modifications – AAA 3.5 Differences between AAA 3.5 and AAA 3.4 are: 1. Multiple segmented high lift devices can now be entered. 2. There is new option for Flap or Slat definition in the configuration dialog window 3. There is an additional Payload Reload mission segment option in weight sizing.
    [Show full text]
  • Chapter 6 Fuselage and Tail Sizing - 8 Lecture 30 Topics
    Airplane design(Aerodynamic) Prof. E.G. Tulapurkara Chapter-6 Chapter 6 Fuselage and tail sizing - 8 Lecture 30 Topics 6.5 Fuel system 6.6 Landing gear 6.6.1 Tricycle type or nosewheel landing gear 6.6.2 Retractable and non-retractable landing gear 6.6.3 Tail wheel type landing gear 6.6.4 Bicycle type landing gear 6.7 Subsystems Example 6.3 6.5 Fuel system The fuel system includes fuel tanks, fuel pumps, fuel lines, vents and fuel flow controls. The fuel tanks are of three types.They are : (a) Discrete (b) bladder and (c) integral. Discrete tanks are fuel containers fabricated separately and fixed inside the airplane. These are used for general aviation aircraft and home built airplanes. Bladder tanks consist of rubber bags inserted into the space available for storage of fuel. They are also self sealing – if a bullet pierces the tank; the rubber fills in the hole and prevents large loss of fuel and fire hazard. Integral tanks are cavities within the wing/fuselage which are sealed to form a fuel tank. Note : To calculate the space required for fuel, the following guidelines are followed. (Ref.1.18, chapter 10) the weight of the fuel required is known from the consideration of the range. The volume of the fuel can be calculated knowing it’s relative density which varies between 0.77 to 0.82; a value of 0.8 can be taken for the first estimate. Decide the type of fuel tank, to arrive at the space for fuel in Dept.
    [Show full text]
  • CRANFIELD UNIVERSITY ZHISONG MIAO Aircraft Engine Performance and Integration in a Flying Wing Aircraft Conceptual Design School
    CRANFIELD UNIVERSITY ZHISONG MIAO Aircraft Engine Performance and Integration in a Flying Wing Aircraft Conceptual Design School of Engineering MSc by Research MSc Thesis Academic Year: 2011-2012 Supervisor: Dr. C.P. Lawson January 2012 CRANFIELD UNIVERSITY School of Engineering MSc by Research MSc Thesis Academic Year 2011 to 2012 ZHISONG MIAO Aircraft Engine Performance and Integration in a Flying Wing Aircraft Conceptual Design Supervisor: Dr. C.P. Lawson January 2012 © Cranfield University 2011. All rights reserved. No part of this publication may be reproduced without the written permission of the copyright owner. ABSTRACT The increasing demand of more economical and environmentally friendly aero engines leads to the proposal of a new concept – geared turbofan. In this thesis, the characteristics of this kind of engine and relevant considerations of integration on a flying wing aircraft were studied. The studies can be divided into four levels: GTF-11 engine modelling and performance simulation; aircraft performance calculation; nacelle design and aerodynamic performance evaluation; preliminary engine installation. Firstly, a geared concept engine model was constructed using TURBOMATCH software. Based on parametric analysis and SFC target, the main cycle parameters were selected. Then, the maximum take-off thrust was verified and corrected from 195.56kN to 212kN to meet the requirements of take-off field length and second segment climb. Besides, the engine performance at off- design points was simulated for aircraft performance calculation. Secondly, an aircraft performance model was developed and the performance of FW-11 was calculated on the basis of GTF-11 simulation results. Then, the effect of GTF-11 characteristics performance on aircraft performance was evaluated.
    [Show full text]
  • EFFECTS of AFT-FUSELAGE-MOUNTED NACELLES on the SUBSONIC LONGITUDINAL AERODYNAMIC CHARACTERISTICS of a TWIN-Turbojeqt AIRPLANE by Lawrence E
    https://ntrs.nasa.gov/search.jsp?R=19670003847 2020-03-24T02:31:03+00:00Z EFFECTS OF AFT-FUSELAGE-MOUNTED NACELLES ON THE SUBSONIC LONGITUDINAL AERODYNAMIC CHARACTERISTICS OF A TWIN-TURBOJEqT AIRPLANE by Lawrence E. Putndm and Charles D. Trescot, Jr. .., , .. : ., '. ,.p, .*/-- Langley Reseurch Center ,,. ,>id. c rd .,,.& t.d\ , ';:. ,;c;C'>3 Langley Station, Hampton, Vu. ,z,, . ., .bz$$Y' ,.\. ~jq v;y I, ,,;- -.;;.;r .8';:"''/ (t ;;.; ~~ ..',-'.....-.,7 il . si h '/ .I. ;I i <, :,, ,:>- - .. *.-a__ NATIONAL AERONAUTICS AND SPACE ADMINISTRATION WASHINGTON, D. C. DECEMBER 1966 ) I [ TECH LIBRARY KAFB, NM NASA TN D-3781 EFFECTS OF AFT-FUSELAGE-MOUNTED NACELLES ON THE SUBSONIC LONGITUDINAL AERODYNAMIC CHARACTERISTICS OF A TWIN - TURBOJE T AIRPLANE By Lawrence E. Putnam and Charles D. Trescot, Jr. Langley Research Center Langley Station, Hampton, Va. NATIONAL AERONAUTICS AND SPACE ADMINISTRATION For sale by the Clearinghouse for Federal Scientific and Technical Information Springfield, Virginia 22151 - Price $2.50 EFFECTS OF AFT-FUSELAGE-MOUNTED NACELLES ON THE SUBSONIC LONGITUDINAL AERODYNAMIC CHARACTERISTICS OF A TWIN-TURBOJET AIRPLANE By Lawrence E. Putnam and Charles D. Trescot, Jr. Langley Research Center SUMMARY An investigation has been made in the Langley 26-inch transonic blowdown tunnel to determine the effects of aft-fuselage-mounted nacelles on the aerodynamic characteristics of a twin-turbojet airplane. The tests were made over a Mach number range from 0.63 to 0.82, at Reynolds numbers (based on wing mean aerodynamic chord) from 2.79 X 106 to 3.94 X lo6, and at angles of attack from -2' to 6O. The investigation was undertaken pri- marily to determine the effects of nacelle incidence, nacelle longitudinal location, nacelle cant angle, and modifications to the local area distribution on the lift, drag, and pitching- moment characteristics of the airplane configuration.
    [Show full text]
  • Sp4409-Vol2-2.Pdf
    308 Chapter 3: The Design Revolution Document 3-15(a-e) 309 INTO THE NacELLE The problem becomes easiest when there are outboard engine nacelles, for the nacelle usually provides ample space for housing the gear and gives the proper tread with the wheels located under the concenetrated loads On a high wing monoplane design with engines in the leading edge, the landing gear must be very high Because of the great height it is almost impossible to take the side loads as a cantilever, and therefore the design must be complicated by side struts to the fuselage as on the General YO-27 (see illustration) where they remain out in the air-stream when the wheel is retracted In the new Dutch built Fokker F-XX a compromise apparently has been reached by retaining the high wing and lowering the engine nacelles below the wing so that a completely retractable gear can be obtained with no side struts to the fuselage, the nacelles carrying all the load Fokker seems to have decided that the slightly increased drag of the lowered nacelles did not offset the advantages of the high wing, with its inherently less drag and greater lift as well as its absence of buffeting and better passenger vision (see page 59 and references 3, 4 and 5) How- ever, some designers have reached a compromise in another fashion, locating the nacelle in the best position with reference to the landing gear and then lowering the wing to have the engine in the leading edge Examples of this are the new Martin bomber, the Boeing bomber and the new Boeing transport, and the new Douglas
    [Show full text]