DOCSLIB.ORG

Improving Design Processes Through Structured Reflection : a Domain-Independent Approach

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Improving Design Processes Through Structured Reflection : a Domain-Independent Approach Improving design processes through structured reflection : a domain-independent approach Citation for published version (APA): Reymen, I. M. M. J. (2001). Improving design processes through structured reflection : a domain-independent approach. Technische Universiteit Eindhoven. https://doi.org/10.6100/IR538800 DOI: 10.6100/IR538800 Document status and date: Published: 01/01/2001 Document Version: Publisher’s PDF, also known as Version of Record (includes final page, issue and volume numbers) Please check the document version of this publication: • A submitted manuscript is the version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website. • The final author version and the galley proof are versions of the publication after peer review. • The final published version features the final layout of the paper including the volume, issue and page numbers. Link to publication General rights Copyright and moral rights for the publications made accessible in the public portal are retained by the authors and/or other copyright owners and it is a condition of accessing publications that users recognise and abide by the legal requirements associated with these rights. • Users may download and print one copy of any publication from the public portal for the purpose of private study or research. • You may not further distribute the material or use it for any profit-making activity or commercial gain • You may freely distribute the URL identifying the publication in the public portal. If the publication is distributed under the terms of Article 25fa of the Dutch Copyright Act, indicated by the “Taverne” license above, please follow below link for the End User Agreement: www.tue.nl/taverne Take down policy If you believe that this document breaches copyright please contact us at: [email protected] providing details and we will investigate your claim. Download date: 01. Oct. 2021 Improving Design Processes through Structured Reflection A Domain-independent Approach Copyright 2001 by Isabelle M.M.J. Reymen, Eindhoven, The Netherlands. All rights reserved. No part of this publication may be stored in a retrieval system, transmitted, or reproduced, in any form or by any means, including but not limited to photocopy, photograph, magnetic or other record, without prior agreement and written permission of the author. CIP-DATA LIBRARY TECHNISCHE UNIVERSITEIT EINDHOVEN Reymen, Isabelle M.M.J. Improving design processes through structured reflection : a domain-independent approach / by Isabelle M.M.J. Reymen. – Eindhoven : Eindhoven University of Technology, 2001. Proefschrift. - ISBN 90-386-0831-4 NUGI 841 Subject headings : design research / design theory ; domain independence / design method ; reflection / design process ; description / multidisciplinary engineering design Stan Ackermans Institute, Centre for Technological Design The work in this thesis has been carried out under the auspices of the research school IPA (Institute for Programming research and Algorithmics). IPA Dissertation Series 2001-4 Printed by University Press Facilities, Technische Universiteit Eindhoven Cover Design by Cliff Hasham Improving Design Processes through Structured Reflection A Domain-independent Approach PROEFSCHRIFT ter verkrijging van de graad van doctor aan de Technische Universiteit Eindhoven, op gezag van de Rector Magnificus, prof.dr. M. Rem, voor een commissie aangewezen door het College voor Promoties in het openbaar te verdedigen op dinsdag 3 april 2001 om 16.00 uur door Isabelle Marcelle Marie Jeanne Reymen geboren te Elsene, België Dit proefschrift is goedgekeurd door de promotoren: prof.dr.Dipl.Ing. D.K. Hammer en prof.dr.ir. P. Kroes To Twan vi Preface After I finished my Master's thesis at the Department of Architecture, Urban Design, and Planning (ASRO) of the Faculty of Applied Sciences at the Katholieke Universiteit Leuven (KULeuven) in Belgium, prof. Herman Neuckermans, head of the Department of ASRO, told me of the possibility of doing a Ph.D. research at the Technische Universiteit Eindhoven (TU/e) in The Netherlands. He received a vacancy for a Ph.D. position from a colleague professor in Architecture, namely prof. Thijs Bax. At that moment, Thijs Bax was working at the Stan Ackermans Institute (SAI), the Centre for Technological Design at the TU/e. The aim of the Ph.D. project was to compare design processes in several disciplines in order to develop a multidisciplinary framework for design. Because I had already seen the practice of architecture in my father’s office and I had already studied the theoretical side of it at the KULeuven, I was very enthusiastic about looking into other design disciplines. Instead of first starting a two-year traineeship to become an independent architect and taking over the architect's office of my father, I changed my career plan: I applied for the Ph.D. position and I came to the SAI to do research about designing. The start of my Ph.D. research implied moving from Belgium to The Netherlands. Because research activities were just being set up at the SAI, after a few months, I moved from the SAI to the Department of Computing Science of the Faculty of Mathematics and Computing Science at the TU/e. There, I became a member of the Section Technical Applications (Sectie TT) of prof. Dieter Hammer, the initiator, and first promotor of my Ph.D. project. I have been feeling very well in the Computing-Science Department and, after a while, although my research topic was not a computing-science one, I even became the representative of the Ph.D. students of computing science in the board of the department and in the AiOOE (AiO consultative body Eindhoven). For a number of years, I also organised, first, with Richard Kelleners and, later on, with Tim Willemse, Tao meetings in which Ph.D. students of the department present their work to their colleagues. From the Tao and other meetings, I learned very much and I made a lot of friends. One person of the department, namely Twan Basten, has become very special to me. To him, I dedicate this thesis. Many people contributed to the development of my Ph.D. thesis. It is impossible to mention them all, but the following persons get my special thanks. First of all, I want to thank Herman Neuckermans for teaching me the principles of design methodology during my study in Leuven and for initiating my interest in design research. I want to thank Thijs Bax and Dieter Hammer for offering me the opportunity to come to Eindhoven. I am also very grateful for all facilities and support I got from the SAI and the Faculty of Mathematics and Computing Science; I especially want to thank the managing director of the SAI, Marloes van Lierop. Four supervisors, Dieter Hammer, Thijs Bax, Peter Kroes, and Joan van Aken, guided me through the four years of my Ph.D. research in more than fifteen meetings we had together and in many bilateral discussions. I am very thankful for their participation in my research project and for their belief in me. Having four (professors as) supervisors was a privilege, although it was not always that easy. I am indebted to the junior and expert designers for the input they gave me in the case studies I performed at the beginning of my research project and for their feedback on the results of my research at the end of my project: the junior designers Wilbert Alberts, Chris Arts, viii Janneke Bierman, Paul de Crom, Sander de Jonge, Douwe de Vries, Raymond Habets, Edwin Hautus, Albert Hofkamp, Marcel Renkens, Nicole Segers; the expert designers Jan Brouwer of XX Architecten, Astrid Dobbelaar of Philips Design, Henk Döll of Mecanoo, M. Koster of Philips CFT, Jan Kruithof of Daf, Tinneke Reijbroek of Paper Design, Piet Sanders of TU/e, Bart van den Hoge of Paper Design, Migiel van der Palen of XX Architecten, Wim van der Sanden of Panfox, and Karel Verhulst of Philips Medical Systems. I also want to thank the people that helped me with the implementation of a prototype software tool: Elisabeth Melby for programming and Jack van Wijk and Huub van de Wetering for their supervision and technical advice. Important for the development of my results were also the discussions I had with colleagues I met at conferences and at meetings of the Stichting Toekomstbeeld der Techniek (STT) and the Dommelgroup, and the discussions I had with Ph.D. students and staff from the Faculties of Mathematics and Computing Science, Architecture (DDSS Group), Mechanical Engineering, and Technology Management at the TU/e. I especially want to thank the colleagues from Industrial Design at the TU Delft for their constructive criticism of my work and for their confidence in me. The final realisation of this Ph.D. thesis took place under the supervision of Dieter Hammer, Peter Kroes, Joan van Aken, and Kees Dorst, being the core members of my graduation committee. I like to thank them for their advice and for the time they invested to give comments on several versions of this thesis. I want to thank especially Kees Dorst for his willingness to participate actively in the last phase of the project. I also want to thank Thijs Bax for his many suggestions for improving the thesis. Twan Basten did a great job in correcting my English, helping me with the consistency of the thesis, and suggesting other improvements. Patricia Reymen helped me with the layout of the thesis. I also want to thank prof. Jan Buys, prof. Herman Neuckermans, prof. Koos Rooda, prof. Paul Rutten, and dr. Kees van Overveld for being a member of my graduation committee and prof.
Load more

Recommended publications
  • Glossary Physics (I-Introduction)
    1 Glossary Physics (I-introduction) - Efficiency: The percent of the work put into a machine that is converted into useful work output; = work done / energy used [-]. = eta In machines: The work output of any machine cannot exceed the work input (<=100%); in an ideal machine, where no energy is transformed into heat: work(input) = work(output), =100%. Energy: The property of a system that enables it to do work. Conservation o. E.: Energy cannot be created or destroyed; it may be transformed from one form into another, but the total amount of energy never changes. Equilibrium: The state of an object when not acted upon by a net force or net torque; an object in equilibrium may be at rest or moving at uniform velocity - not accelerating. Mechanical E.: The state of an object or system of objects for which any impressed forces cancels to zero and no acceleration occurs. Dynamic E.: Object is moving without experiencing acceleration. Static E.: Object is at rest.F Force: The influence that can cause an object to be accelerated or retarded; is always in the direction of the net force, hence a vector quantity; the four elementary forces are: Electromagnetic F.: Is an attraction or repulsion G, gravit. const.6.672E-11[Nm2/kg2] between electric charges: d, distance [m] 2 2 2 2 F = 1/(40) (q1q2/d ) [(CC/m )(Nm /C )] = [N] m,M, mass [kg] Gravitational F.: Is a mutual attraction between all masses: q, charge [As] [C] 2 2 2 2 F = GmM/d [Nm /kg kg 1/m ] = [N] 0, dielectric constant Strong F.: (nuclear force) Acts within the nuclei of atoms: 8.854E-12 [C2/Nm2] [F/m] 2 2 2 2 2 F = 1/(40) (e /d ) [(CC/m )(Nm /C )] = [N] , 3.14 [-] Weak F.: Manifests itself in special reactions among elementary e, 1.60210 E-19 [As] [C] particles, such as the reaction that occur in radioactive decay.
    [Show full text]
  • EMT UNIT 1 (Laws of Reflection and Refraction, Total Internal Reflection).Pdf
    Electromagnetic Theory II (EMT II); Online Unit 1. REFLECTION AND TRANSMISSION AT OBLIQUE INCIDENCE (Laws of Reflection and Refraction and Total Internal Reflection) (Introduction to Electrodynamics Chap 9) Instructor: Shah Haidar Khan University of Peshawar. Suppose an incident wave makes an angle θI with the normal to the xy-plane at z=0 (in medium 1) as shown in Figure 1. Suppose the wave splits into parts partially reflecting back in medium 1 and partially transmitting into medium 2 making angles θR and θT, respectively, with the normal. Figure 1. To understand the phenomenon at the boundary at z=0, we should apply the appropriate boundary conditions as discussed in the earlier lectures. Let us first write the equations of the waves in terms of electric and magnetic fields depending upon the wave vector κ and the frequency ω. MEDIUM 1: Where EI and BI is the instantaneous magnitudes of the electric and magnetic vector, respectively, of the incident wave. Other symbols have their usual meanings. For the reflected wave, Similarly, MEDIUM 2: Where ET and BT are the electric and magnetic instantaneous vectors of the transmitted part in medium 2. BOUNDARY CONDITIONS (at z=0) As the free charge on the surface is zero, the perpendicular component of the displacement vector is continuous across the surface. (DIꓕ + DRꓕ ) (In Medium 1) = DTꓕ (In Medium 2) Where Ds represent the perpendicular components of the displacement vector in both the media. Converting D to E, we get, ε1 EIꓕ + ε1 ERꓕ = ε2 ETꓕ ε1 ꓕ +ε1 ꓕ= ε2 ꓕ Since the equation is valid for all x and y at z=0, and the coefficients of the exponentials are constants, only the exponentials will determine any change that is occurring.
    [Show full text]
  • 25 Geometric Optics
    CHAPTER 25 | GEOMETRIC OPTICS 887 25 GEOMETRIC OPTICS Figure 25.1 Image seen as a result of reflection of light on a plane smooth surface. (credit: NASA Goddard Photo and Video, via Flickr) Learning Objectives 25.1. The Ray Aspect of Light • List the ways by which light travels from a source to another location. 25.2. The Law of Reflection • Explain reflection of light from polished and rough surfaces. 25.3. The Law of Refraction • Determine the index of refraction, given the speed of light in a medium. 25.4. Total Internal Reflection • Explain the phenomenon of total internal reflection. • Describe the workings and uses of fiber optics. • Analyze the reason for the sparkle of diamonds. 25.5. Dispersion: The Rainbow and Prisms • Explain the phenomenon of dispersion and discuss its advantages and disadvantages. 25.6. Image Formation by Lenses • List the rules for ray tracking for thin lenses. • Illustrate the formation of images using the technique of ray tracking. • Determine power of a lens given the focal length. 25.7. Image Formation by Mirrors • Illustrate image formation in a flat mirror. • Explain with ray diagrams the formation of an image using spherical mirrors. • Determine focal length and magnification given radius of curvature, distance of object and image. Introduction to Geometric Optics Geometric Optics Light from this page or screen is formed into an image by the lens of your eye, much as the lens of the camera that made this photograph. Mirrors, like lenses, can also form images that in turn are captured by your eye. 888 CHAPTER 25 | GEOMETRIC OPTICS Our lives are filled with light.
    [Show full text]
  • Multidisciplinary Design Project Engineering Dictionary Version 0.0.2
    Multidisciplinary Design Project Engineering Dictionary Version 0.0.2 February 15, 2006 . DRAFT Cambridge-MIT Institute Multidisciplinary Design Project This Dictionary/Glossary of Engineering terms has been compiled to compliment the work developed as part of the Multi-disciplinary Design Project (MDP), which is a programme to develop teaching material and kits to aid the running of mechtronics projects in Universities and Schools. The project is being carried out with support from the Cambridge-MIT Institute undergraduate teaching programe. For more information about the project please visit the MDP website at http://www-mdp.eng.cam.ac.uk or contact Dr. Peter Long Prof. Alex Slocum Cambridge University Engineering Department Massachusetts Institute of Technology Trumpington Street, 77 Massachusetts Ave. Cambridge. Cambridge MA 02139-4307 CB2 1PZ. USA e-mail: [email protected] e-mail: [email protected] tel: +44 (0) 1223 332779 tel: +1 617 253 0012 For information about the CMI initiative please see Cambridge-MIT Institute website :- http://www.cambridge-mit.org CMI CMI, University of Cambridge Massachusetts Institute of Technology 10 Miller’s Yard, 77 Massachusetts Ave. Mill Lane, Cambridge MA 02139-4307 Cambridge. CB2 1RQ. USA tel: +44 (0) 1223 327207 tel. +1 617 253 7732 fax: +44 (0) 1223 765891 fax. +1 617 258 8539 . DRAFT 2 CMI-MDP Programme 1 Introduction This dictionary/glossary has not been developed as a definative work but as a useful reference book for engi- neering students to search when looking for the meaning of a word/phrase. It has been compiled from a number of existing glossaries together with a number of local additions.
    [Show full text]
  • Physics I Notes Chapter 14: Light, Reflection, and Color
    Physics I Notes Chapter 14: Light, Reflection, and Color Characteristics of light • Light is an electromagnetic wave . As shown below, an electromagnetic wave is a transverse wave consisting of mutually perpendicular oscillating electric and magnetic fields. Electromagnetic waves are ultimately produced by an accelerating charge. A changing electric field produces a changing magnetic field which in turn produces a changing electric field and so on. Because of this relationship between the changing electric and magnetic fields, an electromagnetic wave is a self- propagating wave that can travel through a vacuum or a material medium since electric and magnetic fields can exist in either one. Animation of e.m. wave with vibrating charge Scroll down after webpage loads for animation. http://www.phy.ntnu.edu.tw/ntnujava/index.php?topic=35.0 • All electromagnetic waves travel at the speed of light. Electromagnetic waves are distinguished from each other by their differences in wavelengths and frequencies (wavelength is inversely related to frequency) . c=f λλλ c = speed of light = 3.0 x 10 8 m/s in a vacuum = 300,000 km/s = 186,000 miles/s A light year is the distance that light travels in one year in a vacuum. So haw many miles would that be? What would a light-minute be? • The electromagnetic spectrum is a continuum of all electromagnetic waves arranged according to frequency and wavelength. Visible light is only a small portion of the entire electromagnetic spectrum. Page 1 of 8 • Brightness or intensity of light decreases by the square of the distance from the source (inverse square law).
    [Show full text]
  • Near-Field Fourier Ptychography: Super- Resolution Phase Retrieval Via Speckle Illumination
    Near-field Fourier ptychography: super- resolution phase retrieval via speckle illumination HE ZHANG,1,4,6 SHAOWEI JIANG,1,6 JUN LIAO,1 JUNJING DENG,3 JIAN LIU,4 YONGBING ZHANG,5 AND GUOAN ZHENG1,2,* 1Biomedical Engineering, University of Connecticut, Storrs, CT, 06269, USA 2Electrical and Computer Engineering, University of Connecticut, Storrs, CT, 06269, USA 3Advanced Photon Source, Argonne National Laboratory, Argonne, IL 60439, USA. 4Ultra-Precision Optoelectronic Instrument Engineering Center, Harbin Institute of Technology, Harbin 150001, China 5Shenzhen Key Lab of Broadband Network and Multimedia, Graduate School at Shenzhen, Tsinghua University, Shenzhen, 518055, China 6These authors contributed equally to this work *[email protected] Abstract: Achieving high spatial resolution is the goal of many imaging systems. Designing a high-resolution lens with diffraction-limited performance over a large field of view remains a difficult task in imaging system design. On the other hand, creating a complex speckle pattern with wavelength-limited spatial features is effortless and can be implemented via a simple random diffuser. With this observation and inspired by the concept of near-field ptychography, we report a new imaging modality, termed near-field Fourier ptychography, for tackling high- resolution imaging challenges in both microscopic and macroscopic imaging settings. The meaning of ‘near-field’ is referred to placing the object at a short defocus distance with a large Fresnel number. In our implementations, we project a speckle pattern with fine spatial features on the object instead of directly resolving the spatial features via a high-resolution lens. We then translate the object (or speckle) to different positions and acquire the corresponding images using a low-resolution lens.
    [Show full text]
  • Improving Design Processes Through Structured Reflection
    Improving Design Processes through Structured Reflection A Domain-independent Approach Copyright 2001 by Isabelle M.M.J. Reymen, Eindhoven, The Netherlands. All rights reserved. No part of this publication may be stored in a retrieval system, transmitted, or reproduced, in any form or by any means, including but not limited to photocopy, photograph, magnetic or other record, without prior agreement and written permission of the author. CIP-DATA LIBRARY TECHNISCHE UNIVERSITEIT EINDHOVEN Reymen, Isabelle M.M.J. Improving design processes through structured reflection : a domain-independent approach / by Isabelle M.M.J. Reymen. – Eindhoven : Eindhoven University of Technology, 2001. Proefschrift. - ISBN 90-386-0831-4 NUGI 841 Subject headings : design research / design theory ; domain independence / design method ; reflection / design process ; description / multidisciplinary engineering design Stan Ackermans Institute, Centre for Technological Design The work in this thesis has been carried out under the auspices of the research school IPA (Institute for Programming research and Algorithmics). IPA Dissertation Series 2001-4 Printed by University Press Facilities, Technische Universiteit Eindhoven Cover Design by Cliff Hasham Improving Design Processes through Structured Reflection A Domain-independent Approach PROEFSCHRIFT ter verkrijging van de graad van doctor aan de Technische Universiteit Eindhoven, op gezag van de Rector Magnificus, prof.dr. M. Rem, voor een commissie aangewezen door het College voor Promoties in het openbaar te verdedigen op dinsdag 3 april 2001 om 16.00 uur door Isabelle Marcelle Marie Jeanne Reymen geboren te Elsene, België Dit proefschrift is goedgekeurd door de promotoren: prof.dr.Dipl.Ing. D.K. Hammer en prof.dr.ir. P. Kroes To Twan vi Preface After I finished my Master's thesis at the Department of Architecture, Urban Design, and Planning (ASRO) of the Faculty of Applied Sciences at the Katholieke Universiteit Leuven (KULeuven) in Belgium, prof.
    [Show full text]
  • Reflection and Refraction of Light
    Reflection and refraction When light hits a surface, one or more of three things may happen. The light may be reflected back from the surface, transmitted through the material (in which case it will deviate from its initial direction, a process known as refraction) or absorbed by the material if it is not transparent at the wavelength of the incident light. 1. Reflection and refraction Reflection and refraction are governed by two very simple laws. We consider a light wave travelling through medium 1 and striking medium 2. We define the angle of incidence θ as the angle between the incident ray and the normal to the surface (a vector pointing out perpendicular to the surface). For reflection, the reflected ray lies in the plane of incidence, and θ1’ = θ1 For refraction, the refracted ray lies in the plane of incidence, and n1sinθ1 = n2sinθ2 (this expression is called Snell’s law). In the above equations, ni is a dimensionless constant known as the θ1 θ1’ index of refraction or refractive index of medium i. In addition to reflection determining the angle of refraction, n also determines the speed of the light wave in the medium, v = c/n. Just as θ1 is the angle between refraction θ2 the incident ray and the surface normal outside the medium, θ2 is the angle between the transmitted ray and the surface normal inside the medium (i.e. pointing out from the other side of the surface to the original surface normal) 2. Total internal reflection A consequence of Snell’s law is a phenomenon known as total internal reflection.
    [Show full text]
  • 8 Reflection and Refraction
    Physics 212 Lab Lab 8 Reflection and Refraction What You Need To Know: The Physics Now that you have completed all of the labs dealing with circuits, you will move on to the next area of physics, light and optics. In this lab you will be exploring the first part of optics, the reflection and refraction of light at a plane (flat) surface and a curved surface. NORMAL INCIDENT RAY REFLECTED RAY I R MIRROR FIGURE 1 - Reflection off of a mirror Reflection occurs when an incident ray of light bounces off of a smooth flat surface like a mirror. See Figure 1. Refraction occurs when a ray of light that is traveling in one medium, let’s say air, enters a different medium, let’s say glass, and changes the direction of its path. See Figure 2. In order to describe reflection or refraction at a plane surface you need to measure angles with respect to a common reference line. The reference line that is used is called a normal. A normal is a line that is perpendicular to a surface. In Figure 1 you see a ray of light that is incident on a plane surface. The angle of incidence, I, of a ray of light is defined as the angle between the incident ray and the normal. If the surface is a mirror, then the angle of reflection, R, of a ray of light is defined as the angle between the reflected ray and the normal. In order to describe reflection or refraction at a plane surface you need to measure angles with respect to a common reference line.
    [Show full text]
  • Chapter 25 the Reflection of Light: Mirrors
    Chapter 25 The Reflection of Light: Mirrors 25.1 Wave Fronts and Rays Defining wave fronts and rays. Consider a sound wave since it is easier to visualize. Shown is a hemispherical view of a sound wave emitted by a pulsating sphere. The rays are perpendicular to the wave fronts (e.g. crests) which are separated from each other by the wavelength of the wave, λ. 25.1 Wave Fronts and Rays The positions of two spherical wave fronts are shown in (a) with their diverging rays. At large distances from the source, the wave fronts become less and less curved and approach the limiting case of a plane wave shown in (b). A plane wave has flat wave fronts and rays parallel to each other. We will consider light waves as plane waves and will represent them by their rays. 25.2 The Reflection of Light LAW OF REFLECTION FROM FLAT MIRRORS. The incident ray, the reflected ray, and the normal to the surface all lie in the same plane, and the angle of incidence, θi, equals the angle of reflection, θr. θi = θr 25.2 The Reflection of Light In specular reflection, the reflected rays are parallel to each other. In diffuse reflection, light is reflected in random directions. Flat, reflective surfaces, Rough surfaces, e.g. mirrors, polished metal, e.g. paper, wood, unpolished surface of a calm pond of water metal, surface of a pond on a windy day 25.3 The Formation of Images by a Plane Mirror Your image in a flat mirror has four properties: 1.
    [Show full text]
  • 4.4 Total Internal Reflection
    n 1:33 sin θ = water sin θ = sin 35◦ ; air n water 1:00 air i.e. ◦ θair = 49:7 : Thus, the height above the horizon is ◦ ◦ θ = 90 θair = 40:3 : (4.7) − Because the sun is far away from the fisherman and the diver, the fisherman will see the sun at the same angle above the horizon. 4.4 Total Internal Reflection Suppose that a light ray moves from a medium of refractive index n1 to one in which n1 > n2, e.g. glass-to-air, where n1 = 1:50 and n2 = 1:0003. ◦ If the angle of incidence θ1 = 10 , then by Snell's law, • n 1:50 θ = sin−1 1 sin θ = sin−1 sin 10◦ 2 n 1 1:0003 2 = sin−1 (0:2604) = 15:1◦ : ◦ If the angle of incidence is θ1 = 50 , then by Snell's law, • n 1:50 θ = sin−1 1 sin θ = sin−1 sin 50◦ 2 n 1 1:0003 2 = sin−1 (1:1487) =??? : ◦ So when θ1 = 50 , we have a problem: Mathematically: the angle θ2 cannot be computed since sin θ2 > 1. • 142 Physically: the ray is unable to refract through the boundary. Instead, • 100% of the light reflects from the boundary back into the prism. This process is known as total internal reflection (TIR). Figure 8672 shows several rays leaving a point source in a medium with re- fractive index n1. Figure 86: The refraction and reflection of light rays with increasing angle of incidence. The medium on the other side of the boundary has n2 < n1.
    [Show full text]
  • General-Purpose, Wide Field-Of-View Reflection Imaging with a Tabletop 13 Nm Light Source
    Research Article Vol. 4, No. 12 / December 2017 / Optica 1552 General-purpose, wide field-of-view reflection imaging with a tabletop 13 nm light source 1,5,† 1,4,† 1 2 3 CHRISTINA L. PORTER, MICHAEL TANKSALVALA, MICHAEL GERRITY, GALEN MILEY, XIAOSHI ZHANG, 1 1 1 1,3 1 CHARLES BEVIS, ELISABETH SHANBLATT, ROBERT KARL,JR., MARGARET M. MURNANE, DANIEL E. ADAMS, 1,3 AND HENRY C. KAPTEYN 1JILA, University of Colorado, Boulder, Colorado 80309-0440, USA 2Department of Chemistry, Northwestern University, 2145 Sheridan Road, Evanston, Illinois 60208, USA 3KMLabs Inc., 4775 Walnut St #102, Boulder, Colorado 80301, USA 4e-mail: [email protected] 5e-mail: [email protected] Received 11 September 2017; revised 26 November 2017; accepted 27 November 2017 (Doc. ID 306738); published 20 December 2017 Lensless imaging with short-wavelength light is a promising method for achieving high-resolution, chemically sensi- tive images of a wide variety of samples. The use of 13 nm illumination is of particular interest for materials science and the imaging of next-generation nanofabricated devices. Prior to this work, there was an unmet need for a micro- scope that can image general samples with extreme ultraviolet light, which requires a reflection geometry. Here, we fulfill this need by performing lensless imaging using a 13 nm high-harmonic beam at grazing incidence, where most materials are reflective. Furthermore, we demonstrate to our knowledge the first 13 nm reflection-mode lensless micro- scope on a tabletop by using a compact high-harmonic generation source. Additionally, we present an analytic for- malism that predicts when general lensless imaging geometries will yield Nyquist sampled data.
    [Show full text]