Blue Presspress$2.95 U.S./$3.95 Canada

January 2015 theBlueBlue PressPress$2.95 U.S./$3.95 Canada

Which Dillon is INTRODUCING: Right Square Deal B for Toolhead YOU? Stand DP Page 6 Page 63

Dillon’sDillon’s RFRF 100100 3 AutomaticAutomatic PrimerPrimer FillerFiller Eliminates the need illon’s RF 100 Automatic Primer DFiller eliminates the task of fill- for primer pick-up tubes! ing primer pick up tubes. Now you simply pour your primers from their Fills the primer tube box into the top, press the blue button and watch it run! while you reload! In about two minutes the primers are inside the protective metal hous- Clear polycarbonate shield ing. That’s about 30 rounds you can load while the RF 100 is doing your and protective housing work for you! The RF 100 is available for either large or small primers, and conversion kits are available at one low price of $47.95 each. Lg. Primer Filler L02-97077 $317.95 Sm. Primer Filler L02-97111 317.95 Lg. (Euro. 220v) L02-97112 327.95 Sm. (Euro. 220v) L02-97113 327.95 Sm. Conversion L02-17903 47.95 Lg. Conversion L02-17902 47.95 Nylon Packcloth Dust Cover L02-11143 14.95 4 Mike Laybe: What’s Inside: Doctor of QC bout midday Aon Friday, A New Look at October 17, 2014, the shooting com- an Old Friend munity lost a good Page 10 friend. Those of us at Dillon Precision who worked with Mike Laybe lost immeasurably more. Mike was 63, but his active lifestyle made him seem MUCH younger, and Dropping the he alternated between gold mining, handgun and three- gun competition at every opportunity. Hammer: The Over the 20 years or so that he worked at Dillon, Mike held several positions, including a stint on the SIG P320 Pistol phones as a CSR. However, Mike hit his stride in his most recent position as our quality control inspector. Page 36 The job is an important one: inspecting the compo- nent parts of our reloading equipment as they arrive from the vendors. The Gun- As he did with every position, Mike approached the quality control inspector position with a high level of fighter’s professionalism and serious intent. That being said, however, Mike rarely looked “serious.” His demeanor Shrine would best be described as “easygoing” and it would Page 78 not be surprising if there was a portrait of Mike next to the definition of that term in some online dictionary. It was rare not to see him smiling, and his sense of humor was legendary. Product Index One of the more enduring running jokes involving Mike was his honorary title of “Doctor Laybe.” He earned Dillon Precision Products Reloading Machines: it because of his bordering-on-obsessive efforts at produc- BL 550, Pg. 13; Square Deal B, Pg. 8; RL 550B, Pg. 14; XL 650, Pg. 20; SUPER 1050, Pg. 30; SL 900 Shotshell Loader, ing precise and visually perfect reloaded ammunition. At Pg. 38; and “Big Fifty Reloader, ” Pg. 50 one three-gun match, a fellow competitor discretely RF 100 Automatic Primer Filler 3 inquired as to just what sort of physician was “Doctor Vibratory Case Cleaners 18 Laybe.” Mental gears spun up and soon Mike was quietly Case/Media Separators 18 pronounced as a specialist in the treatment of an area of Dillon Progressive Reloading Dies 34-35 the body we all have, but seldom mention. At the end of Redding Reloading Dies 52 the event, when all competitors usually shake hands, Dillon Reloading Scales 86 Mike held his out and a few people declined his grasp. Reloading Components 42-43 Upon explanation, Mike laughed, and then proceeded to Books & Videos 82-83 expand upon the joke at every match thereafter. Ear & Eye Protection 12 The consensus here at Dillon is that the Almighty Dillon Ammo Boxes & Bins 64 came across a quality control issue that demanded the Dillon Leather by Mitch Rosen 24-25 level of expertise only “Doctor Laybe” could bring to Concealed Carry Tote/“Plan B” Day Planner 47 the table, and Mike was called to a higher purpose. Range Bag/Border Shift Ammo Bag/Pistol Cases 32 If there are shooting matches in Paradise (and true Targets and Target Stands 54 Firearms Maintenance 66-67 shooters must believe there are in order for it to live up Tools 53 to the name) Mike was there in time to shoot, tape tar- Shooting Accessories by Manufacturer: gets and re-set steel that weekend. Arredondo Accessories 33, 39, 59 Blade-Tech Industries Holsters, etc. 28 California Competition Works 37, 40, 56, 57 THE CED Chronograph/Timer 85 BLUE PRESS Check-Mate Magazines 69, 70 Chip McCormick Magazines 68 Michael J. Dillon - Publisher Issue #271 C-More Sights 76 Mark G. Pixler - Editor January Comp-Tac Holsters 29 [email protected] 2015 Dewey Cleaning Supplies 67 Gary Kieft - Technical Editor Hogue Handgun Grips 60 International Handgun Leather 27 Contributors: Lone Wolf Distributors 58 Peter Caroline Robin Taylor Copyright 2015 by MagPul AR-15 Magazines/Accessories 72-73 Brian Dillon, Ph.D. Duane Thomas Dillon Precision Mec-Gar Pistol Magazines 70 John Marshall Barrett Tillman Products, Inc. Mernickle Holsters 22 All the electrical and/or electronic components of Dillon ProMag Rifle Magazines 70 equipment and all Dillon textiles are covered by a one-year Safariland Holsters 29, 57 warranty from date of purchase. Any modifications performed Streamlight Tactical Lights 60 to Dillon machines, or the addition of any unapproved The Wilderness Tactical Products 26, 27 equipment, including automated or mechanical add-ons from Wilson Combat Magazines, Parts 68 other manufacturers, is expressly not recommended and Wise Company Gourmet Freeze Dried Food 83 will void the Dillon warranty. 5 6 Which Dillon is Right for YOU?

Page 8 Page 14 Page 20 Page 30 SQUARE DEAL B RL 550B XL 650 SUPER 1050 Our automatic-indexing The most versatile reloader Truly the state of the art, Our commercial-grade progressive reloader available, capable of load- our XL 650 features auto- reloader includes a swager designed to load moderate ing over 160 calibers. An matic indexing, an optional to remove the crimp from quantities of common automatic casefeeder is automatic casefeeder and military primer pockets, handgun calibers from .32 available for handgun a separate station for an and is capable of reloading S&W to .45 Colt. It comes calibers. Manual indexing optional powder-level all the common handgun to you from the factory set and an optional magnum sensor. Available in all calibers and several up to load one caliber. powder bar allow you to popular pistol and rifle popular rifle calibers. load magnum rifle calibers. calibers. Dillon Progressive Loading Machines: Facts & Figures

SQUARE DEAL B RL 550B XL 650 SUPER 1050 COST Base price $384.95 $439.95 $566.95 $1739.95 Caliber Conversion price range $86.95-96.95 $45.95-55.95 $77.95-87.95 $122.95-202.95 RATE Cyclic rate (Rounds per hour) 400 550 1000** 1200 One hour production rate 350 500 800** 1000 Caliber change time 10 min 5 min 10 min 20 min FEATURES Number of stations 4 4 5 8 Auto index yes no yes yes Auto Casefeeder no optional optional standard Uses standard (7/8” x 14) dies no yes yes yes Powdercheck System no no optional optional Primer Early Warning System standard standard standard standard Failsafe Powder System standard standard standard standard Separate Crimp Station yes yes yes yes SPECIFICATIONS Primer magazine capacity 100 100 100 100 Casefeed capacity (.38/.223) N/A N/A 600/500 600/500 Powder measure capacity 3/4 lb 3/4 lb 3/4 lb 3/4 lb Shipping weight 17 lbs. 25 lbs. 36 lbs.* 66 lbs. Height required above bench*** 34 in. 35 in. 44 in. 43 in. Benchtop overhang required*** 1-3/4 in. 3/4 in. 3/4 in. None CALIBERS Pistol .32 S&W - .45 Colt All common All common All common Rifle N/A All common All common .223 - .30-06 *XL 650 weighs 47 lbs. with optional Casefeeder. **With optional Casefeeder. ***Without optional Strong Mount. 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com HP1 Electronic Hearing Protector • Protection Rating NRR 21 • External battery compartment • Auto shut off extends battery life • Extra-deep, replaceable ear pads • Separate volume controls for each ear • TRUE stereophonic sound • Collapsible for ease of storage • One-year warranty on electronics

illon’s HP1 Electronic Hearing Protector Damplifies weak sounds while at the same time blocking out loud, harmful noise. Dur- ing loud noises, the HP1 maintains a comfortable level of sound transmission – HP1 Hearing Protectors are designed to never completely shut off. The Dillon HP2 Folding Hearing Protector is comfortable to wear for extended periods and folds for easy storage when not in use. HP2 Dillon Hearing Protectors Non-Electronic HP1 (NRR 21) Electronic Hearing Protector, Blue Hearing Protector L02-10157 $135.00 HP1 Electronic Hearing Protector, Black L02-10156 135.00 HP2 (NRR 21) Non-Electronic Hearing Protector, Blue L02-10361 19.95 Hearing HP2 Hearing Protector, Black L02-10360 19.95 Protector HP1/HP2 Replacement Ear Cushions L02-19022 10.00 Belt Clip Hearing Protector Belt Clip L02-13020 3.29 8 SQUARE DEAL ‘B’ STANDARD FEATURES: • Automatic Indexing • Available in 18 Handgun Calibers • Loading Rate: 400-500 Rds./Hr. • Comes With One Caliber Conversion • Automatic Powder Measure SDB DVD • Automatic Primer System Instruction Manual • Comes Complete With Dies L02-19482 $19.95 • Factory Adjusted, Ready-to-Use • Lifetime “No-B.S.” Warranty All for ONLY... $38495*

Total price as pictured here with optional accessories below: $560.75 SDB Strong Mount L02-22223 $64.95 Low Powder Sensor L02-16306 $41.95 Aluminum Bullet Tray L02-22214 $41.95 SDB Tool Holder with Wrench Set L02-19441 $26.95 “SDB” Stock Numbers .32 S&W Long/H&R Magnum* L02-16815 $414.95 .380 ACP L02-20053 .38 Special L02-20102 .357 Magnum L02-20103 .38 Super L02-20099 .38 Super Comp L02-20115 9mm L02-20104 .40 S&W L02-20787 10mm L02-20643 .41 Magnum L02-20054 .44 Special L02-20105 .44 Magnum L02-20052 .44-40 Winchester L02-21036 .45 ACP L02-20101 .45 Colt L02-20051 .45 GAP L02-20098 .45 S&W Schofield L02-20418 SQUARE DEAL ‘B’ ACCESSORIES 9 A. SqUARE DEAL ‘B’ CONvERSION kITS E. PRIMER PICkUP TUBES Change from one Used to transfer primers F. caliber to another A. from flip tray to priming in minutes. Con- system. version includes 1 Lg. tube L02-22029 $7.99 carbide size die 1 Sm. tube L02-22028 7.99 2 Sm., 2 Lg. L02-20056 23.95 (except .44-40), 4 Lg. tubes L02-20050 23.95 expander/ powder 4 Sm. tubes L02-20049 23.95 E. funnel, seat die, F. PRIMER FLIP TRAy crimp die, A heavy, high-quality tray large enough for the shellplate and Federal primer package. L02-13606, $20.95 each locator buttons. g. MACHINE COvER .32 S&W Long/H&R Mag. L02-16774 $96.95 G. (.32 S&W Requires X-Small Powder Bar L02-20780 $29.95) This great looking nylon cover .380 ACP L02-20246 86.95 adds security to your loading .38 Special L02-20240 86.95 bench. Your reloader will be pro- .357 Magnum L02-20240 86.95 tected against more than dust as .38 Super L02-20229 86.95 these covers come with a D-ring .38 Super Comp L02-20275 86.95 that allows the heavy duty zipper 9mm L02-20241 86.95 to be locked. .40 S&W L02-20469 86.95 Machine Cover, 10mm L02-20469 86.95 L02-13795, $23.95 .41 Magnum L02-20247 86.95 (H.) Master lock, .44 Special L02-20242 86.95 .44 Magnum L02-20242 86.95 L02-13083, $3.95 H. .44-40 Winchester L02-21035 86.95 .45 ACP/.45 GAP L02-20123 86.95 .45 Colt L02-20248 86.95 I. I. LOW POWDER SENSOR .45 S&W Schofield L02-20417 86.95 Provides an audible and visual SqUARE DEAL ‘B’ qUICk CHANgE (Not reminder when it’s time to refill Pictured) Toolhead and powder measure. your powder reservoir. When the L02-16378, $99.95 powder level drops to about 1000 ‘SDB’ POWDER MEASURE L02-20001, $76.95 grains, a buzzer will sound and a bright red LED will light. B. SqUARE DEAL ‘B’ B. L02-16306, $41.95 TOOLHEAD Extra toolheads keep all your adjustments J. MACHINE the way you left MAINTENANCE J. them. kIT L02-20113, $31.95 Everything you need to keep your Dillon loader cleaned and lubri- C. SqUARE DEAL BENCH WRENCH cated up to factory The Square Deal specifications. Bench Wrench Available in combi- C. has the correct nation with a spare sizes for Square parts kit for your machine. Deal “B” die Maint. Kit/SDB Spare Parts Kit L02-97015, $35.95 adjustments. L02- 19970, $8.95 k. SDB SPARE PARTS kIT each. Buy two or Don’t risk downtime more, $8.10 each. waiting for a replacement part! D. CARTRIDgE CASE 1 SD Shellplate Bolt BIN & BRACkET 1 SD Ejection Wire 4 SD Wave Bearings Ergonomically 1 Toolhead Friction Plate 2 Pistol Decapping Pins designed to cut your 2 Magazine Orifices, Large workload through 1 Small Primer Seat Punch 1 SD Slide Return Spring 2 Pickup Tube, Large, Green Tips economy of motion! 1 #10 Tinnerman Insert 1 3/16” Index Ball Attaches to all Strong- 1 Bellcrank Cube 2 Magazine Orifices, Small 4 Locator Pins (#1, #2, #3, #4) 2 Retaining Clips Mount-equipped 1 Indexer Return Spring 1 SD Index Lever Assembly SDBs. 1 Large Primer Seat Punch 2 Dispensing Tips, Large D. L02-11672, $24.95 1 Primer Seat Punch Spring 2 Dispensing Tips, Small 2 Pickup Tube, Small, Yellow Tips L02-20778, $21.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com 10 AA NewNew LookLook atat anan OldOld FriendFriend (And Some Damn Nice Gunleather)

By Peter Caroline very appealing about the venerable warhorse. I was an E-2 at Fort Belvoir, Virginia, when I My latest encounter with my old friend was at bought my first 1911. We’d been put on 24-hour the Gunsite Academy in Paulden, Arizona, this alert because of some diplomatic mix-up in past summer. I was invited to a writers’ pistol Lebanon back in the late 1950s. I figured I’d need class, sponsored by Simply Rugged Holsters, something a bit handier than my issue M-1 Ruger, HPR Ammo, Crimson Trace, Streamlight Garand if my unit got shipped over, so I borrowed and Militec-1 lubricants. Just bring appropriate a ride into Alexandria and bought a clapped-out clothing and eye and ear protection, they said, G.I. surplus 1911 at Hunter’s Lodge for $23. It was and we’ll provide everything else. How can one really worn and ugly. I brought it back to the bar- turn down an offer like that? racks, detail-stripped it and took everything but I was issued a Commander-length Ruger the bare frame and slide to Ordnance, where I SR1911 .45 for use during the class. Simply swapped all the used parts for new ones. As it Rugged provided their new “The Shootist” holster, turned out, the alert was a false alarm. But it was along with their Dual Defender magazine pouch the beginning of a beautiful friendship. and a stout 1-3/4” gunbelt. This is a formidable rig. Since then, I’ve owned several dozen 1911s The Shootist holster is reminiscent of the tradition- of varying makes and models. There’s something al Mexican loop holster of the old West. It sits AA NewNew LookLook atat anan OldOld FriendFriend (And Some Damn Nice Gunleather) 11 high and very snug on your side. It is surprisingly we were told that we could each purchase the compact (and unobtrusive under a vest) and holds gun we used, at a very attractive price. The gun the gun very securely. After some presentation was accurate, and hadn’t had on hiccup in all drills, I found it quite easy to draw the gun quickly the rounds I put downrange. So, of course I and smoothly. The stiffness of the Herman Oak- bought it. I had a local gunsmith fit a Wilson tanned leather is very helpful when reholstering. ambidextrous safety and a short trigger, both of We got a lot of practice in both tactical and which solved my problems quite handily. speed reloads during the three-day class. Simply Shortly after I arrived home from Gunsite, I Rugged’s Dual Defender magazine pouch got took the SR1911 to a commercial indoor range. quite a workout. It snaps on to the belt, is After firing about five magazines full of Winches- adjustable for tension and doesn’t take up much ter White Box 230-grain ball, I noticed a sudden room at all. change in my sight picture…there was no front The Simply Rugged belt is the first and last gun- sight. The vertical portion of the sight had parted belt you’ll ever need. “Heavy duty” doesn’t even company from the base, and was somewhere begin to describe it. Constructed of two layers of north of the firing point. I emailed Brandon Herman Oak pre-dyed leather, glued and sewed Trevino, the product manager at Ruger. He together, it is 1/4” thick, and fitted with two emailed me back a couple of hours later. Appar- leather keepers. The solid brass buckle is secured ently, some of the guns we had used at Gunsite with Chicago screws. If you require a belt capable were early production models incorporating a of supporting a large handgun, a generous supply MIM (Metal Injection Molded) front sight, which of ammo and exhibited prob- perhaps a small lems, and they anvil, this is the would send me one! a new, Ruger really machined sight hit it out of the that was now park with their standard pro- SR1911. It’s a duction. A while stainless steel later, he sent pistol available another email, in both standard saying they’d 5” and 4.25” also include a Commander- new night sight style barrel that hadn’t yet lengths. It’s a been released to “Series 70” the public. The design, with no next day, FedEx firing pin safety delivered both needed, thanks sights, one with to a titanium fir- a tritium insert. ing pin and a heavy firing pin spring. Unlike most The tritium sight is in place right now, and works 1911s, the plunger tube is machined integral with like a charm. the frame, so there’s no possibility of it ever shoot- As I mentioned in an earlier Blue Press article, ing loose. The magazine release button is extend- Gunsite is THE place to go if you want to sharpen ed just enough to make magazine changes a lot your gun handling skills. And Ruger guns and faster and easier. The flat mainspring housing was Simply Rugged leather gear will help you per- a feature I appreciated, having a small hand. form at your personal best. I couldn’t ask for The SR1911 sights are a 3-dot system with a more than that. Novak LoMount Carry rear and a conventional Ruger SR1911 .45 ACP pistol, 4.25” or 5” barrel. front sight. I noticed that several of my classmates MSRP $829 blacked out the rear dots with a Magic Marker. Sturm, Ruger & Co., Inc. Different strokes for different folks. 200 Ruger Road • Prescott, AZ 86301 I did have a couple of nits to pick…purely 928-541-8892 • www.ruger.com individual. I’m left handed, and I have rather Simply Rugged “The Shootist” Holster $80 stubby fingers. Using a conventional 1911 safety Simply Rugged Belt $65 does not come naturally, and I noticed that I was Dual Defender Magazine Pouch $50 using the tip of my finger on the SR1911’s skele- Simply Rugged Holsters tonized aluminum trigger. We carried the gun in P.O. Box 10700 • Prescott, AZ 86304 Condition One at all times, disengaging the safe- 928-227-0432 • www.simplyrugged.com ty during presentation. At the end of the week, DP 12 ABSOLUTE. PREMIUM. PROTECTION. WILEY X PROTECTIVE EYEWEAR

Romer 3 $95 WX Valor $95 WX Saint $95 3-Lens Pkg., Smoke Grey, Clear, 3-Lens Pkg., Smoke Grey, Clear, 3-Lens Pkg., Smoke Grey, Clear, Light Rust L02-12104 Light Rust L02-12105 Light Rust L02-12102

WILEY X PROTECTIVE EYEWEAR MEETS ANSI, EN166 AND MILITARY VO BALLISTIC STANDARDS $999

Bomber Glasses’ lenses and Clear L02-10513 frames are made from High- Smoke L02-10514 Index Polycarbonate that is Light Blue L02-10515 durable, flexible and impact Yellow L02-10516 resistant. All colors provide Amber L02-10517 Bomber Glasses UV protection. Smoke Mirror L02-10518 MAX Earplugs EP3 Sonic Defenders By SureFire

ar Pro EP3 Sonic Defenders® Eby SureFire® protect you against loud, harmful noises, yet allow normal conversations to be heard; and the soft, hypoal- Smith & Wesson Winchester lergenic polymer provides all- day comfort. NRR 24 Sm. EP3 Sonic Defenders Foam Earplugs Hearing Protection L02-25340 $12.95 Med. EP3s (Fit Most People) 200 Pair NRR 33 200 Pair Pink Corded Ear Plugs L02-25341 $12.95 Lg. Sonic Defenders L02-19551 $29.99 L02-10456 $40.00 L02-19670 $1.99 L02-25342 $12.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com Spares, Accessories & Upgrades 13 BL 550 for AT 500s, BL 550s & RL 550Bs AUTO PRIME SySTEM Dillon’s Includes: Dillon’s Primer Housing /Shield Primer Slides, Large/Small Basic Loader Pickup Tubes, Large/Small Pickup Tube Tips, Large/Small Magazine Tubes, Large/Small Mag. Orifices, Large/Small Operating Rod Primer Track Bearing Housing Screws Ret. Spring Retaining Pin L02-16627, $82.95 PRIMER SySTEM EARLy WARNINg kIT Allows you to focus on loading instead of worrying about failing to seat a primer, and is an easy slip-on attachment to the auto prime system. $25995 L02-20302, $25.95 AUTO POWDER SySTEM L02-15399 Accurate to within 0.1 grain, Reloading Dies and Caliber Con- our Automatic Powder Measure is versions sold separately world renowned for its charge-to- (see the back of the order blank charge consistency. in the center of The Blue Press). L02-20251, $87.95 Pictured with optional accessories: OPTIONAL MAgNUM RIFLE Strong Mount L02-22051 $47.95 POWDER BAR L02-21353, $29.95

AUTO EJECT SySTEM Greatly increases your illon’s RL 550B has long worn the title of “The ammo production capabilities DWorld’s Most Versatile Progressive Reloader,” and and adds a Cartridge stripping it down to its most basic form – Dillon’s BL Chute/Bracket and a Cartridge (Basic Loader) 550 – adds a whole new dimension Bin to your reloader. of versatility for the shooter/hunter who needs to L02-22120, $30.95 feed several rifles. The BL 550 is essentially an RL 550B without the AT 500 POWDER DIE automatic priming and powder systems. Capable of Extra powder dies allow you to loading over 160 calibers – just like the RL 550B – it move your powder measure from tool- uses any manufacturer’s standard 7/8” x 14 reloading head to toolhead without changing the dies. It’s priced comparably with other manufacturers’ “belling” adjustment. turret presses; yet unlike them, it’s fully upgradeable Powder Die: L02-16629, $19.95 to Dillon’s Progressive RL 550B loader! Oversize Die: L02-16626, $19.95 The interchangeable toolhead (Page 15) makes it Plastic Funnel: L02-16617, $5.95 quick, easy and inexpensive to change calibers. For example, if you load .30-06 for elk, .243 for deer and POWDER MEASURE .22-250 for coyotes, you don’t even have to change ADAPTER the shellplate. You simply pull two pins and swap the If you load rifle car- toolhead with your .30-06 dies to another toolhead tridges with long-grain with your .22-250 or .243 dies in less than 30 sec- extruded powder, you can onds! The additional toolheads are $22.95 each, or now use any manufactur- $20.95 each if you buy three or more – if you load for er’s powder measure with several rifles it’s a no-brainer! Once you get your dies 7/8” x 14 threads on your adjusted, you’ll never have to re-set them. RL 450, AT 500, BL 550 or A powder measure adapter (bottom right photo) is RL 550B. (Requires the use of an RL 450 powder available if you want to use a manual measure that die – see below.) you already own. Or, if you want to weigh every L02-20029, $22.95 powder charge you load, it’s easy – you can use a RL 450 Powder Die: powder trickler with the powder die/funnel assembly L02-20308, $21.95 that comes with the BL 550. 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com 14 RLRL 550B550B STANDARD FEATURES: • Accommodates Over 160 Calibers • Uses Standard 7/8” x 14 Dies RL 550B DVD • Loading Rate: 500-600 Rds./Hr. Instruction Manual • Comes With One Caliber Conversion L02-19483 $19.95 • Interchangeable Toolhead Assembly • Automatic Powder Measure • Automatic Primer System • Lifetime “No-B.S.” Warranty All for ONLY... $43995* L02-14261 Reloading dies sold separately. *Prices vary on exotic-caliber machines.

Total Price as pictured here with optional accessories: $736.60 .45 ACP Die Set L02-14404 $63.95 Strong Mount L02-22051 $48.95 Alum. Roller Handle L02-17950 $45.95 Low Powder Sensor L02-16306 $41.95 Aluminum Bullet Tray L02-22214 $41.95 RL 550 Toolholder with Wrench Set L02-11541 $28.95 Cartridge Case Bin/Bracket L02-11185 $24.95 H. RL 550B CASEFEEDER UPgRADE 15 RL 550B ACCESSORIES Available for most pistol cartridges – A. RL 550B will not work with rifle cartridges. CALIBER Large Pistol L02-14450 CONvERSION kITS Small Pistol L02-14451 Contains: $264.95 (110v US Model) Shellplate, powder Large Pistol L02-14453 funnel and locator Small Pistol L02-14454 buttons. Available $274.95 (220v Euro Model) in all calibers; CASEFEEDER CALIBER CONvER- please specify cal- SIONS (Page 17) H. A. iber desired. $23.95 each L02-RL550B CON- I. PRIMER FLIP TRAy VERSION $45.95 (Exotic calibers, $55.95) I. L02-13606, $20.95 each B. AUTO POWDER J. PRIMER PICkUP TUBES MEASURE SySTEMS 1 Lg. tube L02-22029 $7.99 Additional powder 1 Sm. tube L02-22028 7.99 measures stay on the J. 2 Sm., 2 Lg. L02-20056 23.95 4 Lg. tubes L02-20050 23.95 toolhead. Never change 4 Sm. tubes L02-20049 23.95 powder measurements again! k. 550 SPARE PARTS kIT RL 550 Powder Measure B. 1 Seating Punch, Small L02-20782, $76.95 ea. 1 #10 Tinnerman Insert 1 Primer Cup, Large Magnum Rifle Powder Bar 1 Primer Cup, Small K. L02-21353, $29.95 each 1 Bellcrank Cube X-Small Powder Bar 1 3/8” Index Ball L02-20780, $29.95 each 1 550 Brass Tip Set Screw C. 1 550 Ejector Wire C. DELUxE qUICk 1 Cartridge Retaining Spring 2 Pickup Tube, Large, Green Tips CHANgE ASSEMBLy 1 550 Slide Return Spring 2 Magazine Orifices, Small 4 Locator Pins (#1, #2, #3, #4) 1 550 Primer Cup Spring With a quick change 1 Seating Punch, Large 2 Retaining Clips assembly and a caliber 1 550 Index Ball Spring 2 Dispensing Tip, Large conversion kit (SOLD 2 Pickup Tube, Small, Yellow Tips 2 Dispensing Tip, Small 2 Magazine Orifices, Large 1 Failsafe Bushing Rev. B SEPARATELY), you can convert in less than a 1 Toolhead Pin L02-20048, $18.95 minute. Complete with: • Toolhead L. MACHINE MAINTENANCE kIT • Powder Measure Provides you with everything • Powder Die you need to keep your Dil- • Toolhead Stand lon loader cleaned and lubri- Price without Dies, L02-22058, $103.95 cated up to factory specifica- Loading dies sold separately on Pages 34, 35 & 52. tions. Available in combination with a spare parts kit for D. POWDER DIES your machine. D. Extra powder dies allow you to Maint. Kit & RL 550B Spare Parts Kit L02-97016, $32.95 move your powder measure from toolhead to toolhead M. LOW POWDER SENSOR without changing the “belling” Provides an audible and visual adjustment. reminder when it’s time to refill your powder reservoir. When the M. L02-20064, $11.35 each E. Three or more, $10.25 ea. powder level drops to about 1000 X-Large Powder Die, L02-21253, $19.95 each grains, a buzzer will sound and a bright red LED will light. E. TOOLHEADS L02-16306, $41.95 Don’t adjust dies when switching calibers. These precision tool holders hold your dies in N. EqUIPMENT DUST COvERS perfect alignment, making caliber changes N. This packcloth nylon machine cover quick and easy. comes equipped with a D-ring, allow- L02-13909, $22.95 each ing the heavy duty zipper to be locked. Three or more, $20.95 ea. RL 550B Cover, L02-13795, $23.95 F. TOOLHEAD STANDS (O.) Master lock, L02- The ultimate in conven- 13083, $3.95 ience for keeping your Quick-Change Cover (for reloading bench clean and use with powder measure) uncluttered. L02-11143, $14.95 F. L02-22055, $20.95 each O. Three or more, $18.95 ea. P. UNIvERSAL MOUNTINg HARDWARE kIT g. 1” BENCH WRENCH G. Includes: 4-Grade 5 Hex Bolts, 4-Lock Nuts, 4 L02-10842, $7.95 each Flat Washers, 4-Fender Washers, 2-Wood Screws. Two or more, $7.10 ea. L02-14355, $5.49 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com 16 Dillon Reloading Accessories illon’s Reloading Accessory Package Deals include: either Dillon’s DD-Terminator Electronic Scale or Eliminator Balance Beam Scale, a Dial Caliper, a Primer Flip Tray, a Bench Wrench, an 8 oz. bottle of Case Lube, a pair of clear safety glasses, a machine cover and the latest edition of the Lyman Reloading Handbook. SDB (Balance Beam Scale) L02-14482 $182.95 SDB (Electronic Scale) L02-14483 251.95 RL 550B (Balance Beam Scale) L02-21143 181.95 RL 550B (Electronic Scale) L02-22117 250.95 XL 650 (Balance Beam Scale) L02-21430 197.95 XL 650 (Electronic Scale) L02-22118 266.95

illon’s Toolholders are available for your RL 550B, XL 650, SL D900, and Square Deal B, and ensure that the tools you need to service your reloader are handy and organized. No more dig- ging around your bench trying to find the right size hex wrench! XL 650/SL 900 with Wrench Set L02-11555 $29.95 XL 650/SL 900 w/o Wrench Set L02-11554 18.95 RL 550 with Wrench Set L02-11541 28.95 RL 550 w/o Wrench Set L02-11543 17.95 Casefeed 550, with Wrench Set L02-11540 28.95 Casefeed 550, w/o Wrench Set L02-11542 17.95 Square Deal B with Wrench Set L02-19441 26.95 Dipped Ball-End Hex Wrenches L02-11483 17.95 One-Inch Bench Wrench L02-10842 7.95 Square-Deal-Only Wrench L02-19970 8.95

illon’s illon’s “Belted illon’s DStrong DMagnum” Powder DRoller Mounts System features a max- Handle gives increase your imum-capacity steel your reloader machine’s powder bar that can an entirely new “footprint” to dispense more than “feel,” reduces over 10”, 100 grains of extruded operator spreading the load over the whole IMR powder. Magnum fatigue, and bench instead of stressing the leading rifle cartridges can re- makes primer edge. For XL 650 owners with limited quire from 70 grains to seating easier. overhead clearance, the XL 650-only well in excess of 100 Alum. Roller L02-17950 $45.95 mount raises the machine 6” above grains for a single Plastic Roller L02-22183 40.95 the bench top. All mounts come with charge. We tested this all the fasteners necessary to mount system with various extruded rifle your machine and are coated with a powders and found that powder durable black wrinkle finish. charge variations stayed within plus- RL550/XL650 L02-22051 $48.95 or-minus three-tenths of a grain. XL650-only L02-22052 45.95 Magnum Powder System Square Deal “B” L02-22223 64.95 L02-97126 $142.95

illon’s Low DPowder Sen- sor provides an audible and visual reminder when it’s time to refill your Quick-Change Cover for use with powder reservoir. powder measure. L02-11143 $14.95 When the powder level drops to ith Dillon’s RL 450 Upgrade illon’s Bullet Tray is a simple, about 1,000 grains Wcomponents, you can, either all Dshallow aluminum bullet tray remaining in the at once or one assembly at a time, designed and located for economy of reservoir, a buzzer will sound and a upgrade your RL 450 reloader to an motion. Our tray works on the Square bright red LED will light. Designed to RL 550B! Deal “B”, RL 550B and XL 650 when fit all Dillon powder measures. Made RL 450 Upgrade Components equipped with the RL 550/XL 650 of clear polycarbonate, it simply Frame Change L02-20094 $94.95 Strong Mount, and a separate kit is replaces the die-cast metal lid sup- Powder Failsafe L02-20251 87.95 available for the RL 1050. plied with the measure, and operates Auto Prime L02-20055 85.95 Bullet Tray Kit L02-22214 $41.95 on two AAA batteries (included). Auto Eject L02-20002 59.95 RL 1050 Tray Kit L02-22215 41.95 L02-16306 $41.95 Primer Warning L02-20302 25.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com A Casefeeder Dillon’s 17 UPGRADE Stainless for YOUR Steel Case Gages

RL 550B .223 Remington L02-13254 $26.95 .308 Winchester L02-12867 27.95 .30-06 Springfield L02-12679 28.95 .380 ACP L02-15160 15.45 9mm Parabellum L02-15161 15.45 .38 Super L02-15158 15.45 .38 Special L02-15159 15.45 .357 Magnum L02-15163 15.45 .40 S&W L02-15164 15.45 10mm L02-15162 15.45 .44 Magnum L02-15165 15.45 $ 95* .45 ACP L02-15166 15.45 264 .45 Colt L02-15167 15.45 110 Volt US Model .45 GAP L02-12672 15.45 Large Pistol L02-14450 Small Pistol L02-14451 L. E. Wilson Case Gages, Deburring Tool 220 Volt Euro Model, $274.95 .22-250 L02-12718 $36.00 Large Pistol L02-14453 .243 L02-12828 36.00 .25-06 L02-11760 36.00 Small Pistol L02-14454 .270 L02-11828 36.00 *Caliber Conversions sold separately. 6.8 SPC L02-19522 36.00 .30 Carbine (Case Length Only) L02-18784 36.00 .30-30 L02-12924 36.00 7.62 x 39 L02-14901 36.00 7mm Mag. L02-12336 46.00 .300 AAC Blackout L02-19515 36.00 .300 Win. Mag. L02-11752 46.00 .300 WSM L02-18709 36.00 .357 SIG L02-18708 36.00 .38-40 Winchester L02-10682 36.00 .44-40 Winchester L02-10697 36.00 .50 Browning MG L02-14447 60.00 Deburring Tool L02-16038 $20.00 Attain Peak Accuracy With Hornady’s Caliber Conversions L-N-L O.A.L. Gauge and Bullet Comparator for the (Caliper not included) RL 550B Casefeeder $23.95 Each .25-20/.32-20 Winchester L02-14206 .30 Mauser/7.62x25 L02-14204 Overall Length gauge Bullet Comparator .32 S&W Long L02-14205 The initial distance a bullet Correct bullet seating depth is .32 H&R Magnum L02-14283 must travel when fired (from critical to accuracy. In addition, the cartridge case mouth until it minor variations in bullet seat- 9mm/9x21/.38 Super/.30 Luger L02-14284 engages the rifling) is absolutely ing depth will have an effect on 10mm/9x25 Dillon L02-14285 critical to achieving peak accu- both pressure and velocity. .38 S&W L02-14208 racy. Bullet Comparator .38 Super Comp. L02-14287 Straight L02-14622 $38.95 L02-14670 $16.95 .38/.357 Magnum L02-14286 Curved (use for auto, lever and Comparator Insert (required) .357 SIG/.40 S&W L02-14289 pump rifles) L02-14862 $39.95 $8.95 each .38-40/.44-40 Winchester L02-14288 Modified Case (required) .22 caliber L02-14672 $6.99 each .24 caliber L02-14673 .41 Magnum L02-14290 .223 Rem. L02-14627 .25 caliber L02-14674 .44 Russian L02-14209 .22-250 L02-14628 .26 caliber L02-14675 .44 Special/.44 Magnum/.44 Colt L02-14291 .243 Win. L02-14631 .27 caliber L02-14676 .45 GAP L02-11441 .270 Win. L02-14641 .28 caliber L02-14677 .45 ACP/.40 Super/.400 Cor-Bon L02-14292 7mm Rem. Mag. L02-14648 .30 caliber L02-14678 .45 Auto Rim L02-19140 .308 Win. L02-14652 .33 caliber L02-14679 .30-06 L02-14653 .35 caliber L02-14680 .45 Colt/.45 S&W/.454 Casull L02-14279 .300 Win. Mag. L02-14655 .37 caliber L02-14681 .45 Winchester Magnum L02-14210 .45 caliber L02-14682 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 18Dillon’sDillon’s CaseCase PreparationPreparation EquipmentEquipment CV-750 L02-19455 $144.95

CV-2001 L02-20493 $188.95

CV-2001 – The Industry Standard Limited Work Space? Dillon’s CV-2001 Vibratory Case Cleaner is the Dillon’s introducing the new CV-750 heavy duty largest in the industry. Its 12-1/2 quart bowl capacity Vibratory Case Cleaner for those with limited space. will allow you to polish up to 1,300 .38/.357 or 550 This new case cleaner uses the same motor as the .30-06 cases per hour. CV-2001 and is every bit as tough – just more com- Not only is our capacity greater, but our motor is pact. To accompany the CV-750, the CM-500 does larger in horsepower, internally cooled, thermally the same job as the larger CM-2000 Case/Media Sep- protected, and turns on precision ball bearings. This arator; and, like the CV-750, handles just about half is no “hobby” machine! the capacity of the larger unit. The bowl and base are constructed of 7/32” thick injection molded high-strength polypropylene which is impact and abra- sion resistant. Case/Media Separators After we sold thousands of our famous first generation FL-2000 case cleaners, customers who had purchased them began asking us to address the problem of separating the cleaned and polished brass from the cleaning media. We knew from the beginning that the simplest method of separating would be a rotating squirrel cage, but we had to find a design we could manufacture economical- ly. Our problem was that it had to be BIG – big enough to handle the entire load of the FL-2000 series case cleaners. CM-2000 Case/Media Separator L02-20675 $75.95 The solution was an injection molded CM-500 Case/Media Separator L02-21045 $47.95 reversible part. Simple, and it works great. Our device is large, Although scaled down in size, these two pieces of 10” x 14”, and will hold more equipment are every bit as tough as their full-sized than 1,600 .38 Special cases. It counterparts. We used the same materials in their sits on a large media collection construction and designed them to work just as hard tub that measures 18” x 22”. – and do it in a more compact area! The tub keeps the mess off the floor and bench. Attention European Customers: It’s fast – so fast it will remove media from 1500 Case Cleaners are available in 220 volt! rounds of .223 brass in a matter Euro Cv-2001 L02-22047 $213.95 of seconds. Euro Cv-750 L02-19473 $169.95 All Dillon CV-2001 and CV-750 Vibratory Case Cleaners have a One-Year Warranty on the electric motor. Rapid Dillon 19 Polish Case 290 Lube SHINE? You bet your brass! Rapid Lube 5000, Dillon’s Dillon Precision has devel- aerosol cartridge case lubri- oped another exciting new cant, has been replaced by product to make your reload- an “environmentally cor- ing faster and easier. Rapid rect,” non-aerosol case lube. Polish 290 is the first cartridge It works the same: Simply lay case finish designed specifi- your cases out, spray lightly cally to bring a brilliant shine with one or two passes and (20 percent brighter than tum- you’ve done it. No mess, no bling media alone) and a pro- guesswork. Within minutes tective coating to reloaded the lubricant distributes ammunition. Simply add several capfuls to the itself around the cartridge media in your tumbler and run. Rapid Polish 290 cases and you’re ready to load. Try a bottle. has a great residual value and stays in your tum- You’ll never use a grease pad again. bling media. You’ll use less each time you clean D.C.L. Dillon Case Lubricant your cases. Rapid Polish 290 contains no ammonia, so it 8 oz. bottle L02-13733 $8.95 won’t weaken brass cases! Case (20 pc.) L02-20256 135.95 Rapid Polish 290 8 oz. bottle. L02-13804 $8.95 Half and Half 10 bottles of polish /10 of lube Case (20 pc.) L02-20255 135.95 Case (20 pc.) L02-21375 $135.95 Don’t Forget Polishing Media! Crushed walnut hull polishing media – Ground corn cob polishing media – quickly cleans even the dirtiest of cases. the best there is for that final polish. 15-pound bag L02-13287 $23.95 10-pound bag L02-13496 $15.95

This month’s cover model is Alexia with a Smith & Wesson Model M&P15 MOE Mid MAGPUL® Spec Series™ riﬂe. To see more photos of Alexia and other Blue Press cover models, you can “follow” us on Instagram@bluepress on your smart phone, or go to www.instagram.com/bluepress and click “follow.” 20XLXL650650 STANDARD FEATURES: • Automatic Indexing • Uses Standard 7/8” x 14 Dies • Loading Rate: 800-1000 Rds./Hr. • Comes With One Caliber Conversion • 5-Station Interchangeable Toolhead • Automatic Powder Measure • Automatic Primer System • Lifetime “No-B.S.” Warranty All for ONLY... $56695* L02-650 Reloading dies sold separately. *Prices vary on exotic-caliber machines. XL 650 DVD Instruction Manual L02-19484 $19.95

Total price as pictured here with optional accessories: $1128.55 Electric Casefeeder L02-210** $219.95 Powdercheck System L02-21044 $68.95 .45 ACP Die Set L02-14404 $63.95 Strong Mount (550/650) L02-22051 $48.95 Aluminum Roller Handle L02-17950 $45.95 Low Powder Sensor L02-16306 $41.95 Aluminum Bullet Tray L02-22214 $41.95 xL 650 Toolholder with Wrench Set L02-11555 $29.95 XL 650 Accessories 21 A. xL 650 CALIBER A. k. CASEFEED ASSEMBLy CONvERSION kITS Specify large pistol, small pis- Include shellplate, tol, large rifle or small rifle. locator buttons, pow- $219.95 (110v), der funnel and case- $229.95 (Euro. 220v) feed adapter parts. Available in most cal- L. ExTRA L. ibers; please specify CASEFEED caliber desired. PLATES (You MAY need a different casefeed plate, see item L.) $38.95/49.95 L02-XL650 CONVERSION (Specify Caliber) $77.95* *(All belted magnums and exotic calibers, $87.95 ea.) xL 650 Casefeed Assembly Large pistol (110v) L02-21080 (Euro. 220v) L02-97025 Large rifle (110v) L02-21081 (Euro. 220v) L02-97022 B. B. POWDER MEASURE Small pistol (110v) L02-21079 (Euro. 220v) L02-97021 L02-20782, $76.95 each Small rifle (110v) L02-21082 (Euro. 220v) L02-97023 Magnum Rifle Powder Bar xL 650 Casefeed Plate L02-21353, $29.95 each Large pistol L02-21072 $38.95 X-Small Powder Bar Large rifle L02-21075 38.95 L02-20780, $29.95 each Magnum rifle L02-18492 49.95 C. Small rifle L02-21074 38.95 C. POWDER CHECk Small pistol L02-21073 38.95 L02-21044, $68.95 each Three or more, $61.95 ea. M. MACHINE MAINTENANCE kIT D. qUICk CHANgE Everything you need to Toolhead, TH Stand and Pow- keep your Dillon loader cleaned and lubricated up D. der Measure L02-22059, $107.95 to factory specifications. Available in combination with a spare parts kit for E. PRIMER PICkUP TUBES your machine. Maint. Kit & XL 650 Spare Parts Kit L02-97017, $39.95 Used to transfer primers F. from flip tray to priming N. SPARE PARTS kIT system. Don’t risk downtime 1 Lg. tube L02-22029 $7.99 waiting for a replace- 1 Sm. tube L02-22028 7.99 ment part! 2 Sm., 2 Lg. L02-20056 23.95 1 Priming Station Locator Tab 4 Lg. tubes L02-20050 23.95 1 650 Ejector Wire 1 Slide Spring Pin 4 Sm. tubes L02-20049 23.95 E. 1 Indexer Spring F. PRIMER FLIP TRAy 1 650 Primer Indexing Arm 1 650 Index Pawl A heavy, high-quality tray large enough for the 1 650 Primer Cam 1 Indexing Arm Spring Federal primer package. 1 650 Ring Indexer 1 Index Ball Spring 2 Pistol Decapping Pins 2 Pickup Tube, Small, Yellow Tips L02-13606, $20.95 each 1 650 Index Spring Revision A 1 650 Tool Head Pin 1 #10 Tinnerman Insert 2 Pickup Tube, Large, Green Tips G. g. TOOLHEAD STANDS 1 Index Arm Bowed Washer 1 Primer Cup Spring 1 Short Lever Spring 2 Retaining Clips The ultimate in convenience 1 Bellcrank Cube 2 650 Shellplate Cap for keeping your reloading 1 3/8” Index Ball 1 650 Primer Support Shim bench clean and uncluttered. 1 Powder Bar Spacer Plug 1 Case Insert Slide Spring Cap 1 650 Brass Tip Set Screw 1 Priming Station Locator Tab L02-22055, $20.95 each 4 Locator Pins (#1, #2, #3, #4) Bushing Three or more, $18.95 ea. 1 5/16” Index Ball 2 Dispensing Tips, Large 1 Tab/Spring Arm Spring 2 Dispensing Tips, Small H. TOOLHEADS 1 Case Insert Slide Spring 1 Failsafe Bushing Revision B I. 1 650 Pawl Spring L02-13863, $27.95 each L02-21146, $25.95 Three or more, $25.95 ea. O. EqUIPMENT DUST COvERS O. I. POWDER DIES This packcloth nylon machine cover Extra powder dies allow you to comes equipped with a D-ring, allowing move your powder measure from the heavy-duty zipper to be locked. H. toolhead to toolhead without XL 650 Cover, L02-10443, $39.95 changing the “belling” adjustment. (P.) Master lock, L02-13083, $3.95 L02-20064, $11.35 each, three or more, $10.25 ea. Quick-Change Cover (for use with X-Large Powder Dies, L02-21253, $19.95 each powder measure) L02-11143, $14.95

J. xL 650 PRIMINg SySTEM (Not Pictured) P. Small Priming System L02-21065 $80.95 Q. q. LOW POWDER SENSOR Large Priming System L02-20982 80.95 Provides an audible and visual reminder when it’s time to refill your DON’T FORgET ONE OF THESE! powder reservoir. Universal Mounting Hardware Kit L02-14355 $5.49 1” Bench Wrench L02-10842 7.95 L02-16306, $41.95 Buy two or more Bench Wrenches for $7.10 each 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com 2222 Color Coded Aluminum Toolheads for Your RL 550B & XL 650

Blue Anodized RL 550B Toolhead L02-62132 $29.95 Blue Anodized XL 650 Toolhead L02-62136 $34.95 Black Anodized RL 550B Toolhead L02-62133 29.95 Black Anodized XL 650 Toolhead L02-62137 34.95 Gold Anodized RL 550B Toolhead L02-62134 29.95 Gold Anodized XL 650 Toolhead L02-62138 34.95 Silver RL 550B Toolhead L02-62135 29.95 Silver XL 650 Toolhead L02-62139 34.95 Mernickle $7995 Holsters’ Conceal-Carry Performance Series f Cowboy Action Shooting is your Igame, why not CARRY the gun you shoot the most? These holsters can be worn strong side, appendix carry or cross draw and are fully molded. Now also available for J-Frame S&Ws. 4-3/4” SA Colts/clones L02-11560 4-5/8” Ruger Blackhawk L02-15765 Ruger LCR L02-29030 2” J-Frame S&W Rev. L02-15764 “Wild Bunch” 1911 Holster & Mag Pouch his holster/mag pouch was designed in away from your body so you’ll get a full Ta joint effort by World Cowboy Action combat grip, and the holster includes the Shooting Champion Gene “Evil Roy” T-nut lock system to ensure that it stays Pearcey and World Fast Draw Champion in place during a draw. Bob Mernickle when SASS introduced the The mag pouch spaces the maga- “Wild Bunch” category for Cowboy zines so when you grab one mag, the Action Shooting. second isn’t in your way; above the When these two champions put their belt line so the belt doesn’t interfere heads together, they created a holster with the draw; and at the max depth and mag pouch that look like they were required by the sport – and no more – made at the turn of the century, yet fea- so you’ll get a full grip and the ability ture state-of-the-art speed and accuracy. to index with your forefinger for a The holster is hard molded so as not to rapid mag well insert. lose its shape even after thousands of 1911 Holster L02-19947 $139.95 draws. It spaces the pistol’s grip frame Mag Pouch L02-19946 44.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com Dillon’s New Rapid Trim 1500 Case Trimmer23

Dillon’s he RT 1500 is used just like disconnect power cord; and it RT 1500 Ta standard size die. The big can be used on any standard shown difference is that while you are reloader, single stage or pro- installed pushing the case into the die to gressive. on an XL 650. size it, an electric motor driving The RT 1500 Case Trimmer a carbide cutter at 4500 RPM is Assembly L02-62164 is trimming the case to length. $327.95. (Available only in 110 Chips are drawn off through a volt 60 hz.) Size/trim dies are vacuum manifold that clamps sold separately (Please see chart to the outside of the special below). Replacement carbide size/trim die. (Vacuum cleaner cutting blades, L02-13141, are and hose not included.) The RT $19.95 each. Upper lock rings, 1500 is equipped with a quick- L02-13559, are $4.99 each. RT 1500 & 1200B Size/Trim Die Calibers .204 Ruger L02-21028 $58.95 RT 1500 Motor Only L02-61500 $297.95 .222 Rem. L02-21363 58.95 .223 Rem. L02-20107 50.95 .223 Rem. Carbide L02-19797 175.00 .220 Swift L02-21364 58.95 .22-250 Rem. L02-20110 55.95 .243 Win. L02-20109 55.95 .25-06 Rem. L02-21367 58.95 6.5 x 55mm L02-21495 58.95 .270 Win. L02-20112 55.95 7mm Rem. Mag. L02-21366 58.95 .30-30 Win. L02-20111 55.95 XL 650 Short Trim Die Toolhead .300 WSM L02-21029 58.95 L02-62112 $33.95 .300 Blackout L02-62140 175.00 NOTE: The .300 Blackout Carbide Trim RT 1200B Case Trimmers Die MUST be used with a Short Trim RT 1200B Trimmers will continue be sold Die Toolhead. while they last. The RT 1200B Case Trim- .308 Win. L02-20106 50.95 mer Assembly L02-22080 is $267.95. .308 Win. Carbide L02-62126 175.00 NOTE: The RT 1200B trimmer for the .30-06 L02-20108 50.95 7.62 x 39 and 6.8 SPC cartridges is not .30-06 Carbide L02-62159 225.00 compatible with other size/trim dies, .300 Win. Mag. L02-21370 58.95 and these trim dies are not compatible .300 Wby. Mag. L02-21371 58.95 with the RT 1500. .303 Brit. L02-21765 58.95 RT 1200B Motor L02-22024 $272.95 8 x 57 Mauser L02-21502 58.95 6.8 SPC (trim die) L02-16391 58.95 .338 Win. Mag. L02-21368 58.95 7.62 x 39 (die) L02-16390 58.95

MILITARYEliminate the “Grunt Work” with Dillon’sBRASS? Super Swage 600 ntil now, reusing military brass, with its crimped Uprimer pockets, has been a tedious task. The Dil- lon solution is a remarkably simple device that bolts to your bench and allows you to swage the primer pockets with speed and ease. The case is supported from the inside, so you won’t be tearing the rims off L02-20095 the brass. A tool steel, hardened swage rod (easy to $100.95 change from large to small primers) simply rolls the crimp away. No reaming is necessary. Our unique compound cam leverage system assures not only ease of operation, but perfect alignment with each and every round. Sound simple? It is and it works. What’s more, it’s inexpensive. The Super Swage 600 comes with large and small swage rods. 6.8 SPC Back-Up Rod L02-62124 $20.95 9mm Adaptor L02-62168 14.95 .40 S&W Adaptor L02-62169 14.95 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 24 Dillon Leather by Mitch Rosen!

When we lost our supplier for Dillon Leather, we considered abandoning the gunleather business. Fortunately, we were able to team up with Mitch Rosen Extraordinary Gunleather to continue to offer a best-quality, made-in-the-USA line of belts and holsters. We know you’ll like these products – we’re happy to have our name on them.

GLOCK 19, 23, 32 L02-18814 GLOCK 26, 27, 33 L02-18815 GLOCK 20, 21 L02-18816 Makarov L02-18819 SIG P220, P226 L02-18818 5JR-DL $75 SIG P228, P229 L02-18827 full-length belt slide that offers all-day comfort S&W Military & Police 9mm/.40 Auto L02-19011 Aand superior concealment for an outside-the- S&W Military & Police .45 Auto L02-19012 pants belt holster. S&W Military & Police SHIELD™ L02-12241 Beretta 92 L02-18817 S&W 2” J-Frame Revolver L02-18820 Colt Government Model L02-18810 Springfield Armory XD 4” L02-18825 Colt Commander L02-18811 Springfield Armory XD 5” L02-18874 Colt Officers L02-18812 Springfield Armory XD-S L02-12236 GLOCK 17, 22, 31 L02-18813 Ruger 2.25” SP-101 Revolver L02-18828

MBS-DL $50 5DM-DL $50 SOS-DL $55 ingle mag pouch with snap- ouble mag pouch with two ne magazine, one tactical Son/snap-off belt loop. Dbelt loops. Olight (fits 6P-size lights). 1911 L02-18847 1911 L02-18851 1911 L02-18855 Beretta L02-18848 Beretta L02-18852 Beretta L02-18856 GLOCK 17, 22, etc. L02-18849 GLOCK 17, 22, etc. L02-18853 GLOCK 17, 22, etc. L02-18857 GLOCK 20, 21, etc. L02-18850 GLOCK 20, 21, etc. L02-18854 GLOCK 20, 21, etc. L02-18858

800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com Dillon Leather by Mitch Rosen! 25

Clipper-DL $65 ur clip-on, inside-the-waistband holster features Oa steel reinforced mouth and a high-quality spring-steel clip. Colt Commander L02-18833 Colt Officers L02-18834 GLOCK 17, 22, 31 L02-18829 GLOCK 19, 23, 32 L02-18830 GLOCK 26, 27, 33 L02-18831 S&W Military & Police 9mm/.40 Compact L02-19013

Sport EXP-DL $98 he Sport™ holster is a straight-drop design featur- Ting a tunnel loop and rear stabilizing slot. This is an all-around holster suited to field use, "practical" competition, and some prefer it for daily carry. Slim profile, straight drop, close to the body. S&W 4” K-Frame Revolver L02-19372 El Raton-DL $50 S&W 4” Lugged Barrel L-Frame Revolver L02-19373 his pocket holster secures and properly positions S&W 4” Light Barrel N-Frame Revolver L02-19374 Ta J-Frame revolver in your pocket. Will not come S&W 4” Lugged Barrel N-Frame Revolver L02-19375 out when you draw. S&W 5” Lugged Barrel N-Frame Revolver L02-19376 2” J-Frame S&W Revolver L02-18843

Best-Quality Belt-DL $70 imply the best GUN BELT you have ever owned. Full, dou- Sble-thickness leather with solid brass buckle and hardware. 1.5” Gun Belt 1.25” Gun Belt 32” Waist L02-18859 32” Waist L02-18873 34” Waist L02-18860 34” Waist L02-18867 36” Waist L02-18861 36” Waist L02-18868 38” Waist L02-18862 38” Waist L02-18869 40” Waist L02-18863 40” Waist L02-18870 42” Waist L02-18864 42” Waist L02-18871 44” Waist L02-18865 44” Waist L02-18872

Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 26 The Safepacker HE WILDERNESS’ SAFEPACKER™ HOLSTER is the ONLY mode of Tconcealed carry that I have personally witnessed save a man’s life. It’s a long story, but suffice it to say that the element of surprise afford- ed by the Safepacker did the trick. The folks at The Wilderness con- tend that the Safepacker™ is the best, most versatile and utilitarian holster in the world. I tend to agree, because the one you see pictured at left…is mine. Mark Pixler, editor The Safepacker can be hand carried like a day planner, equipped with a shoulder strap (not included), slipped into an attaché case, opened with the top flap stuffed between the mattress and box springs on your bed, strapped to a seatbelt, attached to a sun visor, clipped to a backpack, or worn on your hip as a very low-profile “un-holster.” “Government Model” Safepacker, RH L02-11703 $89.95 “government Model” Fits: Colt government Model, gLOCk 17/18/20/21/22, SIg P-220/226, Beretta 92/96, Hk USP-45, 4” k-Frame, 3” N-Frame, etc. “Commander” Safepacker, RH L02-11702 89.95 “Commander” Fits: Colt Commander, SIg P-245/229, Hk USP-45 Compact, Tokarev, etc. “Officers’ Model” Safepacker, RH L02-11701 89.95 “Officers Model” Fits: Colt Officers’ Model, gLOCk 19/23/30/32/36, Para P-12, etc. “GLOCK 26/27” Safepacker, RH L02-11700 89.95 “gLOCk 26/27” Fits: g 26/27, Springfield xD Subcompact, Makarov, etc. “J-Frame” Safepacker, RH L02-11699 89.95 “J-Frame” Fits: S&W Centennial, Taurus M85, Walther PPk, kelTec P-11, etc. “Mustang” Safepacker, RH L02-11698 89.95 “Mustang” Fits: Colt Mustang, Pony, kelTec P-32, Beretta Tomcat, etc. Close & Ready Bedside Holster Caddy he key to the successful gunfight- Ters of the Old West was not so much the weapon of choice, but rather the holster. How quickly the weapon could be retrieved, aimed and fired was the difference between survival and becoming a statistic. The Close & Ready Holster Caddy provides a faster and safer way to protect your family. It works with most exist- ing holsters and slides easily between the mattress and box springs on Holster NOT either side of your bed. Included L02-18046 $29.95 The Pistol Sheath by Center of Mass LLC enter of Mass LLC’s Pistol Sheath is an 11, PF9; Ruger LC9; Taurus Slim 9,.40; G21 w/Picatinny rail); S&W M&Ps, SDs, Sig- Cadjustable, ambidextrous, multi-fit CZ75s and Witness. mas, P99s; FNs; Walther PPS, P99; Hi KYDEX® holster that is durable, affordable The Small Revolver Pistol Sheath fits all Points; Taurus Millenium, Pro, 24/7, 809, and Made in Idaho! J-Frame-Size revolvers, including the new 840, 845; HK USP Compacts, P30, P30 The Small Pistol Sheath will hold all S&W Bodyguard, Ruger SP101 and LCR. Long, 45 Long, P2000/2000SK; SIG Polymer 1911s; Browning Hi Power; Buckmark 22.; The Large Pistol Sheath will hold all frame pistols; Ruger SR9, SR40, SR9C, all Kahrs; Walther P-22, PP, PPK; Kel-Tec P- Springfield XDs; GLOCKs (excluding the SR40C, P345, P95; and many others.

Small Pistol Sheath L02-13351 $28.50 Small Revolver L02-13375 $28.50 Large Pistol Sheath L02-13358 $28.50 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com INTERNATIONAL HANDGUN LEATHER 27 IHLby Ian Martin

IHL Ltd. Class Holster $92.95 Colt Gov’t, Black L02-16456 Colt Gov’t, Brown L02-14348 IHL Solo Mag Pouch $38.95 Colt Com, Black L02-16886 IHL Hammerhead Shark Single Stack, Black L02-16446 Colt Ofcr’s, Black L02-16887 Single Stack, Brown L02-13145 GLOCK 17, Black L02-16891 1911Slide L02-19230 $114.95 Double Stack, Blk. L02-16447 GLOCK 19, Black L02-16890 1911Pouch L02-19231 72.95

IHL Speed Strip Wallet .38/.357 6-rd. L02-18308 $26.50 IHL Prosecutor Holster $87.95 .38/.357 8-rd. L02-18987 $26.50 Ruger Alaskan (Pictured) L02-15038 IHL Belt Slide $49.95 .44/.45 6-rd. L02-18988 $26.50 S&W Governor .410/.45, 2.75” bbl. L02-15041 Colt Gov’t, Black L02-16468 .410 Ga. 6-rd. L02-18990 $29.95 S&W .500 Mag., 4” bbl. L02-15039 Sm. GLOCK, Black L02-16469 .500 S&W 6-rd. L02-18989 $26.50 Taurus Judge 2.5”.410, 2” bbl. L02-15040 THE WILDERNESS TACTICAL PRODUCTS order to better support holsters, magazine pouches and other gear. This belt is a favorite with law enforcement, military personnel, firefighters, paramedics, etc. Note: The 1.75” belt works best with BDUs or jeans. The 1.5“ belt features a scaled-down buckle. Measured Waist 1.5” Belt 1.75” Belt The 32” Waist L02-10965 L02-10253 $39.95 Wilderness’ Original 34” Waist L02-10966 L02-10128 39.95 Instructor Belt is an incredibly strong belt with a specially 36” Waist L02-10967 L02-10129 39.95 designed “V” ring buckle. Imitation is the sincerest form 38” Waist L02-10968 L02-10130 39.95 of flattery, and the marketplace is full of copies of this 40” Waist L02-10969 L02-10131 39.95 belt, but none can compare to the original. 42” Waist L02-10970 L02-10132 39.95 We’re selling the five-stitch version, which has extra 44” Waist L02-10971 L02-10133 44.95 stitch lines to make the belt more rigid vertically in 46” Waist L02-10972 L02-10889 44.95 MAXPEDITION HARD-USE GEAR

B. C. A./B. Rollypoly Folding Dump Pouch L02-19999 $25.99 (A.)Open: 6” Diameter 8” Tall (B.)Folded: 3”x 3”x 1.75” C. Spartan Wallet, Foliage Green (folded) L02-19993 19.99 A. D. Spartan Wallet, Black (open) L02-19992 19.99 D. Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 28

“Revolution” Holster Series Blade-Tech used its extensive knowledge of Kydex© holstermaking to bring you the Revolution line of holsters. Using a proprietary blend of polymers, Blade- Tech has engineered these holsters to offer lifetime performance in a wide range of conditions. The holsters won’t become soft in extreme temperatures (over 300º F) and won’t become fragile in low temperatures. Colt 1911 L02-40011 $29.99 GLOCK 17/22 L02-40012 29.99 GLOCK 19/23 L02-40013 29.99 GLOCK 20/21 L02-40069 29.99 GLOCK 34/35 L02-40068 29.99 Smith & Wesson 4” M&P L02-40067 29.99 Springfield 4” XD 9/40 L02-40071 29.99 Springfield 5” XD 9/40 L02-40070 29.99

BLADETECH Ambi Eclipse™ Straight-Drop Holster 1911 L02-40117 $79.99 BLADETECH 1.5” Inner/Outer Hook & Loop Belt GLOCK 17 L02-40118 79.99 32” L02-12242 $59.99 GLOCK 19 L02-40119 79.99 34” L02-12243 59.99 GLOCK 26 L02-40120 79.99 36” L02-12245 59.99 GLOCK 34 L02-40121 79.99 38” L02-12246 59.99 GLOCK 42 L02-40126 79.99 40” L02-12247 59.99 S&W M&P 4.5” 9/40 L02-40123 79.99 42” L02-12249 59.99 Springfield XD 4” 9/40 L02-40122 79.99 44” L02-12251 59.99 Springfield XDM 4.5” 9/40 L02-40124 79.99 46” L02-12253 59.99 Springfield XDM 5.25” 9/40 L02-40125 79.99 48” L02-12255 59.99

Single Mag $19.99 ea. Double Mag $26.99 ea. 1911 L02-40018 1911 L02-40022 Quad Mag $39.99 ea. Sm. GLOCK L02-40019 Sm. GLOCK L02-40023 1911 L02-40026 AR-15 Single Tek-Loc™ AR-15 Double Tek-Loc™ Lg. GLOCK L02-40020 Lg. GLOCK L02-40024 Sm. GLOCK L02-40027 Mag Pouch Mag Pouch B92/XD/CZ etc. L02-40021 B92/XD/CZ etc. L02-40025 B92/XD/CZ etc. L02-40028 L02-40034 $29.99 L02-40033 $39.99

Blade-Tech Holster/Mag Pouch Hardware (left to right) Large Tek-Loc™ Universal Belt Clip with Hardware L02-40029 $8.95 Tek-Loc™ Dropped Offset Holster Attachment L02-40016 19.99 Dropped Offset Holster Belt Loop Attachment L02-40017 19.99 Mini Tactical Modular Mount System with Hardware L02-39920 24.99 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com SAFARILANDHolsters29 5” N-Frame S&W Revolvers L02-19264 43.95 Beretta Compact, Taurus Compact, CZ-75, Colt Commander Model L02-19265 43.95 Beretta, Taurus, Browning HP, Colt 1911 L02-19266 43.95 Colt Officers’ Model, GLOCK 19/23, SIG P228, HK USP Compact 9/40 L02-19267 43.95 GLOCK 17, 20, 21, 22, HK USP 9/40, Ruger P Series, SIG P220 L02-19268 43.95 Safariland Model 6377 ALS™ Holsters The Model 6377 is a concealment version of the all new Automatic Locking Safariland Safariland System series holster. Once the weapon is holstered, it locks into place, provid- Custom Fit Model ing an extra measure of security from the standard open-top holster. 567 6377 Colt 1911 L02-40072 $39.95 ALS™ GLOCK 17/22 L02-19444 39.95 GLOCK 20/21 L02-19443 39.95 GLOCK 34/35 L02-40073 39.95 SIG 220/226 L02-19446 39.95 SIG 220/226 with Accessory Rail (no light) L02-19447 39.95 SIG 228 L02-19445 39.95 Safariland Custom Fit 567 Holsters S&W M&P 9/40 L02-19448 39.95 The Model 567 Custom Fit holster is one of the lightest, thinnest, best fitting Springfield 4” XD 9/40 L02-40074 39.95 concealment holsters available. True to its name, it adjusts to a wide variety of Springfield 5” XD 9/40 L02-40075 39.95 popular handguns, giving each a “custom fit” in this holster. Springfield XDM 9mm L02-40076 39.95 4” K & L-Frame S&W, Ruger, and Colt Rev. L02-19262 $43.95 Springfield XDM .40 L02-40077 39.95 4” N-Frame S&W Revolvers L02-19263 43.95 TUFF PRODUCTS

Safariland Model 5188 UFF i Tuck Conceal Carry Phone/Firearm THolster. Holds iPhone 4/5, Samsung™ Galaxy™ or similar (up to 5.5” tall x 3.5” Safariland Model 5188 Open Top Concealment Paddle Holster wide x 1” deep) and hidden holster pocket This is a compact and lightweight concealment paddle holster that features an injection molded paddle design offering a comfortable, close to the body fit. fits Ruger LCP/Kel-Tec P3AT or similar. IDPA approved, and with a tough STx finish. Coyote Brown L02-15775 $39.95 Springfield 1911 w/Picatinny Rail L02-19451 $39.95 Black L02-15777 39.95 Comp-Tac: Holsters Dedicated to Your Victory

Comp-Tac International Comp-Tac Infidel Ultra The International features a modular mounting system that offers the versa- An inside-the-waistband holster combining the wearability of the Comp-Tac tility of different mounting options, combining a belt holster, belt drop offset Minotaur MTAC with the simplicity and convenience of The Infidel. Ideal for holster, paddle holster and paddle drop offset holster into one. the individual who needs to safely take his or her weapon off and on through- GLOCK 17/22 L02-40110 $69.00 out the course of the day. GLOCK 34/35 L02-40109 69.00 Colt 5” 1911 L02-40102 $90.00 S&W M&P 9/40 L02-40111 69.00 GLOCK 17/22 L02-40103 90.00 S&W M&P Pro L02-40112 69.00 GLOCK 19/23 L02-40104 90.00 Springfield XD Tactical 9mm L02-40116 69.00 S&W Shield L02-40105 90.00 Springfield XDM 4.5 9/40 L02-40115 69.00 S&W M&P 9/40 L02-40106 90.00 Springfield XDM 5.25 9mm L02-40113 69.00 Springfield XD-S L02-40107 90.00 Springfield XDM 5.25 .40 L02-40114 69.00 Springfield XDM 4.5 9/40 L02-40108 90.00 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 30 SUPER 1050 STANDARD FEATURES: • Automatic Indexing • Commercial Grade Machine • Swages Military Primer Pockets • Loading Rate: 1000-1200 Rds/Hr • Includes One Caliber Conversion • Factory Adjusted Reloading Dies • Automatic Powder Measure • Automatic Primer System • Automatic Casefeeder $173995* *Prices vary on exotic-caliber machines. SUPER 1050 Stock Numbers Super 1050 DVD .223 Remington L02-21130 .223 Rem./Carbide (*$1813.95) L02-21131 Instruction Manual .22-250 Remington L02-21129 L02-19485 $19.95 .243 Winchester L02-21126 .270 Winchester L02-18491 6.8 SPC (*$1789.95) L02-21150 (6.8 SPC comes with lg. and sm. primer systems)

.30 M1 Carbine (*$1754.95) L02-21142 .300 WSM (*$1804.95) L02-21110 .30-30 Winchester L02-21003 7.62x39 (*$1789.95) L02-21144 (7.62x39 comes with lg. and sm. primer systems) .303 British L02-21060 .308 Winchester L02-21058 .308 Win./Carbide (*$1821.95) L02-21068 .30-06 Springfield (*$1804.95) L02-21059 .30-06 Sp./Carbide (*$1954.95) L02-62178 .45-70 Gov’t (*$1849.95) L02-21064 .32 S&W L02-21134 .380 ACP L02-21135 9mm Parabellum L02-21067 .38 Special L02-21136 .357 Magnum L02-21137 .357 SIG (*$1769.95) L02-21127 .38 Super L02-21132 .38 Super Comp L02-21069 .38-40 Winchester L02-21158 .40 S&W L02-21070 10mm L02-21138 .41 Magnum L02-21139 .44 Special L02-21140 .44 Magnum L02-21141 .44-40 Winchester L02-21159 Total price as pictured here with optional accessories: $1892.80 .45 ACP L02-21061 Powdercheck System L02-21044 $68.95 .45 Colt L02-21133 Low Powder Sensor L02-16306 $41.95 .45 GAP L02-21002 Aluminum Bullet Tray L02-22215 $41.95 .500 S&W (*$1804.95) L02-20428 1050 Accessories 31 A(1). qUICk-CHANgE D. PRIMER PICkUP TUBES TOOLHEAD CONvER- A(1). Used to transfer primers E. SION from flip tray to priming Includes: system. •Toolhead 1 Lg. tube L02-22029 $7.99 •Powder Measure 1 Sm. tube L02-22028 7.99 2 Sm., 2 Lg. L02-20056 23.95 L02-21393, $270.95 4 Lg. tubes L02-20050 23.95 4 Sm. tubes L02-20049 23.95 A(2). CALIBER CONvER- D. SION E. PRIMER FLIP TRAy Includes: A heavy, high-quality tray large enough for the •Shellplate Federal primer package. L02-13606, $20.95 •Locator Buttons •Swage Backup Rod/ Ex- F. 1050 MACHINE COvER A(2). F. pander This great looking nylon cover •Casefeed Adapter adds security to your loading •Casefeed Plunger bench. Comes equipped with a •Powder Funnel D-ring, allowing the heavy-duty zipper to be locked. .32 S&W L02-20634 $122.95 G. .32 ACP L02-20633 122.95 Cover, .380 Auto L02-20483 122.95 9mm L02-20482 122.95 L02-13239, $39.95 .38 Super L02-20484 122.95 (G.)Master lock, .38 Super Comp L02-21057 122.95 L02-13083, $3.95 .38/.357 Magnum L02-20477 122.95 .357 SIG L02-20068 122.95 H. RL 1050 BULLET TRAy .40 S&W L02-20545 122.95 Designed for “economy 10mm L02-20788 122.95 H. .41 Magnum L02-20478 122.95 of motion” when load- .44 Magnum L02-20479 122.95 ing. Our new bullet tray .44-40 Winchester L02-21161 122.95 is made of durable cast .45 ACP L02-20480 122.95 aluminum and is Dillon .45 Colt L02-20481 122.95 .45 GAP L02-21010 122.95 Blue powder coated. .475 Linebaugh/.480 Ruger L02-20833 159.95 .500 S&W Magnum L02-20834 159.95 L02-22215, $41.95 .223 Remington L02-20485 122.95 .22-250 L02-21055 140.95 I. SPARE PARTS kIT .243 Winchester L02-21054 140.95 1 Super 1050 Spring Bushing .270 Winchester L02-21053 140.95 1 Cam Guide Bolt 1/4-20 .30 Carbine L02-20626 140.95 1 Super 1050 Toolhead Spring 7.62x39 L02-20631 159.95 1 Priming Station Retaining Tab .300 WSM L02-20466 159.95 1 Ratchet Restriction Tab .303 British L02-21051 122.95 4 Lock Ring Inserts .308 Winchester L02-21049 140.95 3 Pistol Decapping Pins .30-06 Springfield L02-21050 202.95 2 #10 Tinnerman Inserts .30-30 Winchester L02-21052 140.95 1 1/4” E-Clip 2 Pickup Tube Tips, Large (Green) .45-70 Government L02-21056 173.95 3 Bellcrank Cubes 2 Magazine Orifices, Small (Blue) 2 Primer Punch Springs A(3). 1050 PRIMER SySTEM 2 Retaining Clips 2 1/4-20 3/8 BH Screws 1 Slide Roll Pin Sleeve Large primer system conversion L02-20476 $106.95 4 Locator Pins (#1, #2, #3, #4) 2 Dispensing Tips, Small 1 Tab/Spring Arm Spring 2 Dispensing Tips, Large Small primer system conversion L02-20419 106.95 2 Pickup Tube Tips, Small (Yellow) A(4). ExTRA CASEFEED PLATE 2 Magazine Orifices, Large (Red) L02-20779, $32.95 Large pistol L02-21072 $38.95 J. MACHINE MAINTENANCE kIT Large rifle L02-21075 38.95 Small rifle L02-21074 38.95 Everything you need to Small pistol L02-21073 38.95 keep your Dillon loader 1050 POWDER MEASURE L02-20421 $81.95 cleaned and lubricated up 1050 TOOLHEAD L02-20420 $198.95 to factory specifications. Available in combination B. B. 1050 TOOLHEAD with a spare parts kit for STAND your machine. Black L02-62201, $49.95 Blue L02-62200, $49.95 Maint. Kit & 1050 Spare Parts Kit L02-97018, $46.95 K. k. 1” BENCH WRENCH L02-10842, $7.95 each. C. 1050 TOOLHOLDER Two or more, $7.10 each. Ensures that the tools you L. need are handy and organ- L. BUSHINg DRIvER ized! Wrenches included. L02-20341, $12.95 ea. With bracket L02-62202, $33.95 W/O bracket L02-62203, $29.95 1050 Ball End Dipped Wrench Set M. MOUNTINg HARDWARE kIT L02-62161, $17.95 Includes: 4-Grade 5 Hex Bolts, 4-Lock Nuts, 4 C. Flat Washers, 4-Fender Washers, 2-Wood Screws. L02-14355, $5.49 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com 32 DillonDillon RangeRange BagBag

illon’s New DRange Bag is designed to hold the Stage Bag (inset, top left) or a Border Shift Ammo Bag (sold separately below), as well as a Dillon Large Utility Box (see Page 64). The Main Compartment is 12.5” long x 7” wide x 10” high, the End Pockets are 8.5” tall x 6.5” wide x 2” deep and the Front Pocket is 9” tall x 6” wide x 2” deep. Range Bag, Black L02-19366 $89.95 Stage Bag L02-19259 29.95 Pistol Pouch, Black L02-17027 10.95 ‘Border Shift’ Ammo Bag illon’s two-compartment ammo bag is constructed Dwith a flexible inner liner that will allow the entire volume to be accessible from either zippered opening. You’ll never again mix fired brass with loaded rounds! I.D. Card Holder L02-14575 $2.95

Black Ammo Bag L02-13755 $25.95 DillonDillon PistolPistol CasesCases rotect your handguns with accommodate most “Limited” PDillon’s rugged, padded pis- class autos and the “Large” case tol cases. These cases feature a will accept pistols with scopes pouch on one side for cleaning and extended compensators. gear or other accessories and Small – 7.5”x 11.5” magazine/ speedloader L02-10161 $18.95 pouches on the other. Large – 9.5”x12.5” The “Small” Dillon L02-10162 21.95 Pistol Case will 33

illon Precision announces the release of DJohn Marshall’s new book 101 Classic Firearms: A Chronological Foray into the gold- en years of Firearms Development, a compila- tion of the author’s popular articles appearing in The Blue Press since 2007. 101 Classic Firearms is sure to be a wel- come and prized addition to the library of any serious firearms aficionado. Published by Dillon Precision, and printed and bound in the USA, 101 Classic Firearms is a high-quality full color 11.5” x 9” hardcover with 224 pages packed full of insights and history on 15.5” x 26.5” Dillon Calendar some of the world’s most important firearms. L02-09992 $12.95 L02-40133 $29.95, Autographed L02-97130 $34.95 Arredondo Multi-Function Squib Rod Barrel-Lite® L02-10529 $4.95 Scope Windage Adjustment Tool

Magazine Base Pad Tool/ Scope Battery Cap Remover

his is a MUST-HAVE range-bag accesso- Try. It’s a squib rod (for removing stuck bullets), magazine base removal tool, and scope windage adjustment and battery cap removal tool. L02-15250 $12.95

he Otis Technology, Inc. Breech-to- TMuzzle Cleaning System cleans rifles .22 to .50 cal., shotguns .410 bore to 10 gauge and pistols .22 to .45 cal. The system includes three memory-flex rods, three forged brass tips, two obstruction removers, a T-handle, 0.5 ounce solvent, all-caliber patches, a shotgun brush adapter, two patch savers, five bore brushes, a bore rredondo Accessories’ Magazine-Cleaning reflector and a cleaning guide. Lifetime ABrush is ideal for that little job we all dread warranty! (avoid?)! No excuse, Sir! L02-18174 $39.95 L02-19257 $11.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com 34Dillon’s Pistol Die Sets Unique Hex Adjustments Quick-Release Floating for Wrench Die Inserts Size Die Decap • Floating Decap Assembly Eliminates Assy. Primer “Draw Back” • Long, Tapered Carbide Ring • Radiused Opening Makes Progressive Long, Vented Loading Smoother Tapered Seating Carbide Stem Seat Die Ring • Reversible Seating Stem Makes it Easy to Change Bullet Styles Tighter Heavy, Large, ACCU- Crimp Die Radiused Headed Radiused CRIMP • Quick Disassembly, Easy to Clean Carbide Decap Pin Mouths Die Sizing/Depriming Die .38 Super L02-14399 $64.95 Our sizing/depriming dies feature a unique “floating .38 Special/.357 Magnum L02-14400 64.95 decap assembly” with a snap spring that throws the spent 10mm/.40 S&W L02-14398 64.95 primer off the pin and eliminates the problem of primer .41 Magnum L02-14402 64.95 “draw back” that often occurs when decapping military .44 Special/.44 Magnum L02-14403 64.95 brass. The primary feature of Dillon’s size die design – the .45 ACP/.45 GAP L02-14404 64.95 long, tapered carbide ring with a radiused opening – .45 Colt L02-14405 64.95 remains unchanged. Dillon Carbide Size/Deprime Dies That radiused opening, and its importance to progressive .32 S&W/.32 H&R Magnum L02-14119 $33.45 reloading, is one of the reasons why our seat and crimp dies .380 ACP L02-14410 27.45 are better. We found a way of manufacturing these dies that 9mm Parabellum L02-14415 27.45 has enabled us to make the lead-in radius even bigger! The 9x25 Dillon L02-14602 104.95 bigger radius makes progressive loading with our equipment .357 SIG L02-16513 104.95 even smoother – but that’s still only a part of the story. .38 Super L02-14408 27.45 Bullet Seating Die .38 Special/.357 Magnum L02-14409 27.45 Our new quick-disassembly seat die allows the user to 10mm/.40 S&W L02-14407 27.45 disassemble and clean the seat die without losing adjustment. .41 Magnum L02-14411 27.45 In this manner, bullet lube and shavings can be quickly .44 Special/.44 Magnum L02-14412 27.45 removed from the die, thereby guaranteeing a constant seat- .45 ACP/.45 GAP L02-14413 27.45 ing depth. We’ve incorporated a “flip-flop” seating stem and a .45 Colt L02-14414 27.45 clip that enables you to remove the die insert and change the Dillon Seating Dies seating stem from round nose to semi-wadcutter without .32 S&W/.32 H&R Magnum L02-14106 $25.45 unscrewing a seating stem out of the die body. We’ve always .380 ACP L02-14419 25.45 included both types of seating stems, but the new double- 9mm Parabellum L02-14424 25.45 ended design makes it a simple matter to remove a pin, 9x25 Dillon L02-14603 28.45 reverse the seating stem, make any minor seating depth .357 SIG L02-16515 28.45 adjustments that may be necessary and go on loading in a fraction of the time it used to take. .38 Super L02-14417 25.45 .38 Special/.357 Magnum L02-14418 25.45 Crimp Die 10mm/.40 S&W L02-14416 25.45 We’ve made it easy for you to remove the die insert for .41 Magnum L02-14420 25.45 cleaning without having to change the critical crimp adjust- .44 Special/.44 Magnum L02-14421 25.45 ment. Once your crimp die is set for the proper amount of .45 ACP/.45 GAP L02-14422 25.45 crimp, you’ll never have to change it. This is especially good .45 Colt L02-14423 25.45 news for all of you who load lead bullets! Before, you had to unscrew the die from the toolhead and disassemble the die in Dillon Crimp Dies order to remove any bullet lube or lead residue. Then, you .32 S&W/.32 H&R Magnum L02-14107 $24.45 had to start from square one to re-adjust the crimp. Those .380 ACP L02-14438 24.45 days are over. All you have to do now is pop a clip and the 9mm Parabellum L02-14443 24.45 die insert drops into your hand for cleaning. 9x25 Dillon L02-14604 27.45 .357 SIG L02-16514 27.45 NOTE: All Dillon Pistol Die sets include our sizer/ decap die, .38 Super L02-14436 24.45 seat die and a separate crimp die. (Taper crimp for autos; accu- .38 Special/.357 Magnum L02-14437 24.45 crimp for revolvers.) 10mm/.40 S&W L02-14435 24.45 .41 Magnum L02-14439 24.45 Dillon Pistol Dies (Three-Die Sets) .44 Special/.44 Magnum L02-14440 24.45 .32 S&W/.32 H&R Magnum L02-14426 $64.95 .45 ACP/.45 GAP L02-14441 24.45 .380 ACP L02-14401 64.95 .45 Colt L02-14442 24.45 9mm Parabellum L02-14406 64.95 9x25 Dillon L02-14601 137.95 Spare Decapping Pins .357 SIG L02-22083 137.95 Package of 10 L02-21528 $5.75 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com Dillon’s Rifle Die Sets 35 Stuck Case Hex Adjustments Remover for Wrench Precise, Uniform Size Die Taper Crimp • Full-length, to minimum tolerance Size Die Carbide Polished • Carbide expander ball Expander to a High • Features stuck case remover Ball Micro-Finish Seat Die • Designed to hold bullet straight Solid, throughout the seating process 1-Piece Decapping Pin Taper Crimp Die Standard • Centers case neck and body for 7/8 x 14 Radiused Threads Mouth a more uniform crimp

Dillon Three-Die Rifle Die Sets include a sizing/ Dillon Rifle Dies (Three-Die Sets) depriming die, a bullet seating die and a taper crimp .223 Remington L02-10839 $67.95 die. Dillon Two-Die Rifle Die Sets include a .308 Winchester L02-15574 67.95 sizing/depriming die and a seat/crimp die. .30-06 Springfield L02-10840 67.95 Sizing/Depriming Die Dillon Carbide Rifle Dies (Three-Die Sets) The sizing/depriming die is full-length, to mini- .223 Remington L02-10096 $163.95 mum tolerances, sizing cases down to function in semi- and full-automatic firearms. We strongly sug- .30 M1 Carbine L02-62128 104.95 gest that a headspace case gage be used to correctly .308 Winchester L02-10793 169.95 adjust the size die. .30-06 Springfield L02-62151 275.95 For high volume users, such as commercial Except where noted, die sets include three dies: reloaders, law enforcement agencies, and high carbide size/decap, a seater and a separate crimp power or service rifle competitors, we also offer .223 die. PLEASE NOTE: Carbide rifle dies still require and .308 die sets with a full-length carbide sizing case lubrication! die. Lubrication is still required, but the increased Dillon Size Dies scratch resistance and die longevity of carbide are of .223 Remington L02-12778 $41.95 great benefit to these groups of users. .223 Remington (Carbide) L02-10223 136.95 The depriming assembly includes a carbide .30 M1 Carbine (Carbide) L02-97039 72.95 expander ball for “squeak-free,” effortless neck .308 Winchester L02-10242 41.95 expansion. This expander ball is located in the middle of the depriming stem to take advantage of supe- .308 Winchester (Carbide) L02-10234 149.95 rior initial leverage for easier extraction. .30-06 Springfield L02-12238 41.95 In the event of a stuck case, the design of the .30-06 Springfield (Carbide) L02-62150 224.95 depriming assembly allows it to function as a stuck Universal Decapping Die L02-22127 $26.95 case remover. Dillon Seat Dies Bullet Seating Die .223 Remington L02-21672 $29.95 Our bullet seating die is internally designed to keep .308 Winchester L02-21674 29.95 the bullet straight throughout the seating process. .30-06 Springfield L02-21673 29.95 Once properly adjusted, the only measurable runout Dillon Taper Crimp Dies will be that which is inherent in the bullet. .223 Remington L02-21676 $27.55 Taper Crimp Die .308 Winchester L02-21678 27.55 The taper crimp die is also specially configured to .30-06 Springfield L02-21677 28.55 center both the case neck and the case body, thereby Spare Decapping Pins aligning the entire cartridge for a more uniform .223 Remington L02-13278 $3.99 crimp. Dillon Rifle Dies are designed to meet the more rigid requirements for both accuracy and preci- .308 Winchester L02-13132 3.99 sion demanded by today’s marksman. .30-06 Springfield L02-13069 3.99 A taper crimp die is preferred for loading ammu- For Universal Decapping Die L02-15816 3.99 nition intended to be used in semiautomatic firearms Spare Dillon Die Lock Rings (Fit all 7/8” x 14 thread dies) with detachable box magazines, and in lever-action Dillon Die Lock Ring L02-14067 $1.35 firearms with tubular magazines. 5-Pack Die Lock Rings L02-10669 4.15 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 36 Dropping the Hammer: The SIG P320 Pistol

The SIG P320, left & right sides.

By J. B. Wood Their current full-page ads say, with a touch of humor, that they have “dropped the hammer” (on their competitors). The statement is also mechanically true, as the new P320 actually has no hammer, it is striker-fired. Construction is poly- The three-dot square-picture sights are excel- mer-frame, with good steel for everything else. lent, and you get nicely glowing night-sights as The trigger system is DA-Only, and there is standard equipment. Both sights are dovetail- no manual safety. Internally, there is an auto- mounted, so lateral adjustment is possible. A cau- matic striker-block that is cleared only in the tion, though – it’s best to use a sight-mover, not a last fraction of trigger pull. Actual feel of the hammer and dowel, on night-sights. On my sam- trigger is a short, soft take-up, followed by a ple pistol, no adjustment was required. crisp let-off. Thus, it is pos- The design of the poly- sible to “stage” the trigger mer frame deserves special for careful aiming. On my Considering its quality attention. On the underside Lyman Electronic Scale, at the front, there’s a rail for total average was 8 and performance, the mounting a light or laser. For pounds. the few who still use an Other than the trigger, obsolete version of the two- the only external controls SIG P320 is a real bargain. hand hold, the front of the are the takedown latch, an trigger guard has a slight ambidextrous slide latch, and the push-button hook and cross grooving. The hand part of the magazine release. The last-named part can be grip-frame has a perfect shape for all hand sizes, reversed for left-hand operation. The magazine has with no need for backstrap inserts. The entire area a generous capacity of 17 rounds, information that has a fine stippled surface. will be useful only if you live in a free state. The P320 is a full-sized pistol, not a compact. Dropping the Hammer: The SIG P320 Pistol 37 The numbers: seven yards, Weight is 29.4 standing, and ounces. Overall two-hand hold. length, 8 inches. Five-shot groups Height, 5.5 inch- were all well es, and width, centered in the 8- 1.25 inches. The inch black of the barrel length is Champion 4.7 inches. As VisiShot targets, previously noted, and measured the 9mm maga- 2.0 to 3.5 inches. zine holds 17 Even with the hot rounds. In the CorBon loads, .40 S&W ver- the felt-recoil was sion, it’s 14 A nice surprise in the kit, moderate. rounds. a formed polymer holster. The P320 There are sev- comes in a nice eral other nice hard-polymer little design case, with a points. On the spare magazine, front edge of the extractor, a small square bump a cable-lock, and a nice surprise: a formed poly- protrudes slightly to tell you the chamber is mer holster with a quick-on belt attachment. With loaded. For those who prefer that method of a suggested retail price of $713, and considering cycling, the slide has forward serrations. The its quality and performance, this is a real bargain. smooth, rounded trigger has no vertical grooving. SIG SAUER, Inc. The single-lever takedown is easy. 72 Pease Boulevard • Newington, NH 03801 At the range, I tried the P320 with CorBon DPX, 603-610-3000 • Fax: 603-610-3001 a 115-grain Plus-P load. Distance was the classic www.sigsauer.com DP CAST LEAD BULLETS Made from Certified Analysis Foundry Alloy Handgun and Rifle Bullets 5% Dillon Discount! Enter BluePress in promo www.missouribullet.com box during online checkout “Hardness-Optimized” Wide Selection! 816-597-3204 The widest selection of bullets to choose from Flat Rate Shipping Flat Rate Priority Shipping! 65 lbs. @ $14.00 Anywhere in the US - 65 lbs @ $14.00 Delivery Assurance Guarantee! NEW! We will replace your order if not received in 14 days Hi-Tek Coated Bullets Quality Products! Bullet Casting Alloy We optimize bullet hardness for your intended application also available.

Discounts to Clubs, Dealers, Law Enforcement and Military Personnel www.missouribullet.com 38Dillon’sDillon’s SLSL 900900 Shotshell Loader STANDARD FEATURES: • Automatic Indexing • Auto Powder/Priming Systems • Adjustable Case-Activated Shot System • Factory Adjusted to Load AA Hulls • Factory Adjusted Loading Dies • The Original Tilt-Out Wad Guide • Lifetime “No-B.S.” Warranty All for ONLY... $92995 $1159.90 with Casefeeder 12 Gauge L02-97110 20 Gauge L02-97123 28 Gauge L02-97124 Comes with factory adjusted dies SL 900 Accessories A. SL 900 CONvERSIONS Total price as pictured here with optional accessories: $1247.80 12 gauge Casefeeder (pictured) L02-97037 $229.95 12 Gauge Conversion 20/28 gauge Casefeeder L02-97036 $229.95 L02-20009, $359.95 12 ga. Euro. 220v Casefeeder L02-97118 $239.95 20 Gauge Conversion 20/28 ga. Euro. 220v Casefeeder L02-97125 $239.95 L02-22138, $359.95 Aluminum Roller Handle L02-17950 $45.95 Low Powder Sensor L02-16306 $41.95 28 Gauge Conversion L02-22139, $359.95 D. PACkAgE DEAL 20/28 Gauge Casefeed Plate Includes: Lyman Reloading (not pictured) Handbook, Clear Safety L02-97045, $42.95 Glasses, Dial Caliper, Elimi- SL 900 Powder System nator Scale, Machine Cover, L02-17817, $76.95 and Low Powder Sensor. L02-22290, $199.95 E. SPARE PARTS kIT 1 Pawl Spring 1 20 Gauge Yellow Wad Guide 1 Ejector Wire 1 28 Gauge Green Wad Guide 1 Plastic Wad Guide 1 20 Gauge Locator Pin 1 Swing Arm Torsion Spring 1 Index Pawl 1 Primer Transfer Arm B. SL 900 MACHINE COvER 1 Ring Indexer 1 12 Gauge Locator Pin B. This heavy-duty nylon cover 1 Index Spring Revision A 1 Gum Rubber Insert Revision B comes equipped with a D-ring, 1 Hair Pin Cotter 1 Shot Fitting E-Clip 2 Bellcrank Cubes 1 Failsafe Bushing Revision B allowing the zipper to be locked. 1 Case Insert Slide Spring L02-13239, $39.95 L02-11154, $26.95 F. WINCHESTER SHOTSHELL WADS C. (C.) Master lock L02-13083, $3.95 WT12, 12ga, Orange 500 L02-15515 $11.95 WAA12, 12ga, White 250 L02-15516 8.95 WAA12SL, 12ga, Pink 250 L02-15517 8.95 WAA20, 20ga, White 250 L02-15518 8.95 WAA28, 28ga, Red 250 L02-15519 8.95 WAA41, .410, Red 250 L02-15520 8.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com Comp-Tac’s Trojan Horse Long Gun Case39 he Trojan Horse Long Gun Case is the ﬁrst of its kind: a Tsafe, comfortable, simple and unobtrusive way to carry your long guns with you. No longer do you need to worry about a casual observer spotting you with a “Gun” case as you transport your long guns to and from your car. Instead all they will see is a person with a sports bag. It measures 36” Long, 4”-15” Wide, 4” Deep and features rigid side panels that provide concealment with no printing; an adjustable, padded shoulder strap with side-release buckle on either end; a heavy duty zipper with tactical speed pull attachment for quick deployment; inside divider with Molle straps; and two inside zippered pockets. Will hold up to 20” long barrel with collapsible stock. Standard Trojan Horse Long Gun Case L02-19388 $75.00 Heavy Rated Trojan Horse Gun Case L02-16229 100.00

DCO SUPER UFF Products 3 Gun Ammo Bags (Set ATHUMB® offers Tof 3) are made of 1000 Denier Cor- models for popular cen- dura® and equipped with dual 550 cord terfire pistols and 10/22 cinch strings for secure closure. The style magazines. Red/Blue bags hold up to 200 loose pis- ST1 is for 9mm and .40 tol/rifle rounds and Black bag holds up caliber Beretta, Brown- to 200 loose shotgun rounds. ing, Ruger, SIGARMS, L02-15773 $19.95 S&W, etc. In addition, the ST1 has interior rails and grooves to accommodate Colt Govern- ment magazines. L02-18607 $7.95 ST2 is for GLOCK and Para-Ordnance magazines. L02-18608 $7.95 ST3 handles virtually all centerfire, single-column magazines. L02-18609 $7.95 ST22 is for Ruger 10/22 rifles. L02-18610 $7.95 STJR is for Ruger, Browning, Colt and High Standard .22 pistols. L02-18611 $7.95 A-ZOOM Ammo Premium Metal Snap-Caps ard-anodized, solid alu- .44-40 Winchester 6 pack L02-10803 19.98 Hminum snap caps with a .45 Colt 6 pack L02-10804 19.98 secret “Dead Cap” insert that .223 Remington 2 pack L02-10810 9.99 .22-250 2 pack L02-10809 9.99 protects your firing pin and .243 Winchester 2 pack L02-10811 9.99 outlasts brass by 20 times. .270 Winchester 2 pack L02-10812 9.99 Quite simply the best snap .30 M1 Carbine 2 pack L02-10813 9.99 caps we’ve ever seen. .30-30 Winchester 2 pack L02-10815 9.99 .303 British 2 pack L02-10816 9.99 .32 Auto 5 pack L02-10923 $16.65 .308 Winchester 2 pack L02-10817 9.99 .380 Auto 5 pack L02-10795 16.65 .30-06 Springfield 2 pack L02-10814 9.99 9mm Luger 5 pack L02-10798 16.65 .45-70 Government 2 pack L02-10818 9.99 .357 SIG 5 pack L02-10794 16.65 6.5x55 Swedish 2 pack L02-10819 9.99 .40 S&W 5 pack L02-10796 16.65 7.62x39 Russian 2 pack L02-10820 9.99 .45 ACP 5 pack L02-10797 16.65 12 Gauge 2 pack L02-10805 9.99 .38 Special 6 pack L02-10801 19.98 20 Gauge 2 pack L02-10806 9.99 .357 Magnum 6 pack L02-10800 19.98 28 Gauge 2 pack L02-10807 9.99 .44 Magnum 6 pack L02-10802 19.98 .410 Bore 2 pack L02-10808 9.99 Saf-T-Trainer Arredondo Accessories’ Multi-Gun Chamber Flags Molded Plastic Dummy/ Training Ammo Sold in packages of five: .45 ACP L02-10062 4.95 .22 LR L02-10086 $4.95 .223 L02-10063 4.95 9mm L02-10087 4.95 7.62x39 L02-10064 4.95 .38/.357 L02-10088 4.95 .308 L02-10065 4.95 .40 S&W L02-10060 4.95 .30-06 L02-10066 4.95 ade of super tough nylon with a melting point of 480 .44 Mag. L02-10061 4.95 20 Ga. L02-10067 7.95 Mdegrees. Kit includes one shotgun chamber flag and one .45 Colt L02-10061 4.95 12 Ga. L02-10068 7.95 for your AR-15. L02-15485 $11.95 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 40 12 Gauge Shotshell Tactical Strippers

A. B. C. D.

alifornia Competition Works’ Tactical Strippers are (C. & D.) that will accommodate up to a 2-1/4” duty belt. Cavailable in three, four or six-shell versions that allow A. Six-Shell Tactical Stripper L02-18606 $23.95 quick access to your shotgun reloads. Engineered to carry B. Four-Shell Tactical Stripper L02-18605 22.95 up to 3” magnum* shells as well as the longer European C. Three-Shell Aluminum Stripper* L02-19475 34.95 shotshells. All CCW Tactical Strippers are equipped with D. Six-Shell Covered Tactical Stripper L02-19225 33.95 either a belt clip (A. & B.) or a UM84 attachment device *Three-Shell Aluminum Stripper accommodates 2-3/4” shells only. AP Custom USA Shotshell Carriers/Caddies, Mag ID Kits

C. D.

F. A. B.

Custom USA’s Shotshell Caddies are 100-percent AP Custom USA’s Mag ID Kits enable you to color code and APmachined from solid billet aluminum. The 4x4 Shotshell number your P-Mags and pistol magazines. Caddy holds four 2-3/4” 12 Ga. shells in two adjacent slots. The A. QL/8 Shotshell Carrier L02-12220 $99.95 4x4 is designed for loading four shells at once, either strong- or B. QL/4 Shotshell Carrier L02-12219 49.95 weak-handed. The 3x3 Shotshell Caddy holds three 2-3/4” 12 C. 4x4 Shotshell Caddy L02-14343 69.95 Ga. shells in two adjacent slots. The QL/4 Shotshell Carrier is a four-round 12 Ga. “quad- D. 3x3 Shotshell Caddy L02-14344 69.95 load” system consisting of a single QL shell carrier mounted to Replacement Spring Kit L02-12221 14.95 an adjustable billet aluminum backer plate on a Blade-Tech Tek- E. Pistol Mag ID Kit, Black L02-12222 13.95 Lok. The QL/4 backer plate allows the shooter to adjust the angle Pistol Mag ID Kit, Blue L02-12227 13.95 of the QL to his or her liking. The backer plate is also drilled and Pistol Mag ID Kit, Red L02-12229 13.95 tapped to accept Safariland ELS and Blade-Tech MOLLE attach- F. P-Mag ID Kit, Black L02-12230 15.95 ments. The QL/8 Shotshell Carrier is an eight-round 12 Ga. P-Mag ID Kit, Blue L02-12232 15.95 “quad-load” system consisting of a two QL/4 shell carriers. P-Mag ID Kit, Red L02-12233 15.95 TACCOM, LLC Tactical and Competition Accessories ACCOM, LLC’s Duaload Shotshell ACCOM, LLC’s THolder is available in 2-, 4-, or 6- TQuaload Shotshell Shell versions and can be customized to Holder is a serious carry your shotgun ammo in several con- game changer! It’s so figurations. The 2Up version can be ei- radical that they are ther attached to a belt or MOLLE gear, patenting the device. and the 4Up and 6Up versions feature a The Quaload holds the BLADETECH Tek-Lok™ Universal Belt 2 columns of shells next Clip (included) that can be attached at to one another, you various angles. The Duaload allows you can't get any closer than to grab two shotshells aligned in such a having them touch. No manner that it makes it easy to load two other quad load device can do this! This allows for you to control at a time into your shotgun. how the shell come out of the holer and not have to worry about rim 2Up Belt/MOLLE L02-19530 $9.95 overlay…the rims are already overlapped in the correct position! 4Up w/Tek-Lok™ L02-19531 29.95 4Up Quaload Shotshell Holder L02-19543 $39.95 6Up w/Tek-Lok™ L02-19532 34.95 8Up Quaload Shotshell Holder L02-19544 69.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com

42 Berry’s Manufacturing Preferred Plated Bullets Description Stock # 250 500 1000 .40 Caliber/10 Millimeter Bullets Bullets for the 7.62 x 39 Cartridge 155 gr. FP-DS* L02-17541 35.00 68.00 126.00 123 gr. RN-DS* L02-17210 $42.00 $81.00 $150.00 155 gr. HBRN-DS* L02-17238 36.00 70.00 130.00 .380 Caliber Bullets 165 gr. FP-DS* L02-17232 36.00 70.00 130.00 100 gr. RN-DS* L02-17532 24.00 46.00 85.00 165 gr. HBFP-DS* L02-17271 41.00 79.00 146.00 9 Millimeter Bullets 180 gr. FP-DS* L02-17542 38.00 74.00 137.00 115 gr. RN-DS* L02-17533 25.00 49.00 90.00 180 gr. RS-DS* L02-17515 35.30 68.26 127.00 115 gr. HBRN-TP* L02-17178 27.00 52.00 96.00 .45 Caliber Bullets 124 gr. RN-DS* L02-17534 27.00 51.00 95.00 185 gr. HBRN-DS* L02-17543 41.00 78.00 145.00 124 gr. HBRN-TP* L02-17272 30.00 57.00 106.00 185 gr. FP-DS* L02-17516 35.30 68.26 127.00 124 gr. HBFP-TP* L02-17385 30.00 57.00 106.00 200 gr. FP-DS* L02-17537 41.00 78.00 145.00 147 gr. RN-DS* L02-17535 31.00 60.00 110.00 200 gr. HBFP-DS* L02-17517 45.00 78.00 146.00 .357 Caliber Bullets 230 gr. RN-DS* L02-17549 42.00 80.00 149.00 125 gr. FP-DS* L02-17536 28.00 53.00 98.00 Description Stock # 200 400 800 158 gr. RN-DS* L02-17540 33.00 63.00 117.00 .44 Caliber Bullets 158 gr. FP-DS* L02-17539 33.00 64.00 118.00 240 gr. FP-DS* L02-17545 39.00 76.00 140.00 *DS = Double Struck, TP = Thick Plate, HB = Hollow Base, RN = Round Nose, FP = Flat Point, SWC = Semi Wadcutter, WC = Wadcutter Sierra Starline Brass Rifle Bullets Unprimed brass sold in packages of 100 (This is not LOADED ammunition.) (This is not LOADED ammunition.) 5.56mm/.224 Caliber Description Stock # 1 Pkg. 5 Pkg. 10 Pkg. 52 gr. HPBT MatchKing 100/box L02-10178 $25.95 .32 H&R Magnum L02-30258 $19.00 $88.00 $168.00 55 gr. BlitzKing 100/box L02-14458 28.95 .32-20 Winchester L02-31282 25.00 116.00 224.00 69 gr. HPBT MatchKing 100/box L02-13007 27.95 9mm L02-31277 17.00 79.00 152.00 (Requires 1x7” to 1x10” barrel twist.) .38 Short Colt L02-39919 20.00 91.00 175.00 77 gr. HPBT MatchKing 500/box L02-18171 157.95 .38 Special L02-31278 18.00 80.00 154.00 (Requires 1x7” to 1x10” barrel twist.) .38 Super +P L02-31276 20.00 90.00 173.00 6mm/.243 Caliber .38 Super Comp L02-30257 20.00 90.00 173.00 70 gr. HPBT MatchKing 100/box L02-12386 30.95 .357 SIG L02-30528 22.00 102.00 196.00 6.5mm .40 S&W L02-31283 20.00 93.00 180.00 123 gr. HPBT 100/box L02-14459 44.95 10mm L02-31281 21.00 98.00 188.00 142 gr. HPBT 100/box L02-14460 46.95 .45 ACP L02-31284 22.00 99.00 190.00 7.62mm/.308 Caliber .45 Auto Rim L02-31279 24.00 109.00 209.00 168 gr. HPBT MatchKing 100/box L02-10177 42.95 .45 Colt L02-30259 24.00 111.00 214.00 175 gr. HPBT MatchKing 100/box L02-17481 44.95 .500 S&W Magnum L02-38596 61.00 281.00 542.00 GSI Load-ReadyTopBrass Brass International Pre-Lube for Lead Bullets 100% Reconditioned All Top Brass, Inc. reconditioned Eliminates the brass products receive a full visual sticky wax feel inspection prior to packaging. lead bullets have. 5 pack .223 Remington, 1000 L02-19545 $236.00 L02-17108 9mm Parabellum, 1000 L02-19546 129.99 $6.95 .40 S&W, 1000 L02-19547 149.99 ARMSCOR Projectiles Privi Partisan Projectiles .357 Cal. 158 gr. FMJ 100/pkg. L02-15819 $11.99 .308 Cal. 150 gr. FMJ 100/pkg. L02-15809 $27.99 .45 Cal. 230 gr. FMJ 100/pkg. L02-15814 15.99 .357 Cal. 158 gr. JHP 100/pkg. L02-15808 17.99 .40 Cal. 180 gr. JHP 100/pkg. L02-15812 20.99 .45 Cal. 230 gr. FMJ 100/pkg. L02-15813 22.99 “Famous Maker” Match Bullet Seconds .308 Cal., 168 gr., HPBT, 100/pkg. L02-19665 31.95

WARNINg: These products contain lead, which is known to cause birth defects, other reproductive harm and cancer. Handling components, ammunition, cleaning firearms or discharging firearms in poorly ventilated areas may result in lead exposure. Have adequate ventilation at all times and wash your hands thoroughly after exposure.

800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com SNS Casting Hard-Cast Lead Bullets43 Hard-Cast Lead Bullets Stock # 500 1000 NEW! Coated Bullets Stock # 500 1000 9mm RN 115 gr. L02-15306 $39.00 $73.00 .30 M1 Carbine RN 115 gr. L02-15403 $43.00 80.00 9mm RN 125 gr. L02-15258 40.00 74.00 .380 RN 95 gr. L02-15393 40.00 $74.00 9mm FP 125 gr. L02-15279 40.00 74.00 9mm RN 115 gr. L02-15394 41.00 76.00 9mm RNFP 147 gr. L02-15259 43.00 80.00 9mm RN 124 gr. L02-15331 42.00 78.00 .38/.357 RN 95 gr. L02-15291 37.00 69.00 9mm FP 125 gr. L02-15396 42.00 78.00 .38/.357 RNFP 100 gr. L02-15260 38.00 72.00 9mm RN 125 gr. L02-15332 42.00 78.00 .38/.357 RN 125 gr. L02-15261 40.00 74.00 9mm No-Lube-Groove 125 gr. L02-15756 42.00 78.00 .38/.357 RNFP 125 gr. L02-15307 40.00 74.00 9mm FP 147 gr. L02-15333 47.00 88.00 .38/.357 DEWC 148 gr. L02-15262 43.00 80.00 9mm/.38 Super RN 160 gr. L02-15397 52.00 97.00 .38/.357 SWC 158 gr. L02-15263 43.50 81.00 .38/.357 RN 95 gr. L02-15858 40.00 74.00 .38/.357 RN 158 gr. L02-15292 43.50 81.00 .38/.357 RNFP 100 gr. L02-15859 41.00 76.00 .38/.357 RNFP 158 gr. L02-15264 43.50 81.00 .38/.357 FP 105 gr. L02-15860 42.00 77.00 .38/.357 RN 160 gr. L02-15281 43.50 81.00 .38/.357 FP 125 gr. L02-15879 42.00 79.00 .40/10mm FP 140 gr. L02-15265 42.00 78.00 .38/.357 RNFP 130 gr. L02-19679 44.00 81.00 .40/10mm SWC 175 gr. L02-15266 50.00 92.00 .38/.357 DEWC 148 gr. L02-15880 47.00 88.00 .40/10mm FP 180 gr. L02-15267 50.50 94.00 .38/.357 SWC 158 gr. L02-15881 52.00 97.00 .40/10mm RN 200 gr. L02-15285 49.00 91.00 .38/.357 RN 160 gr. L02-15400 52.00 97.00 .44 RNFP 180 gr. L02-15283 50.50 94.00 .40/10mm FP 140 gr. L02-15335 47.00 87.00 .44 RNFP 200 gr. L02-15274 53.00 98.00 .40/10mm RNFP 165 gr. L02-19677 55.00 101.00 .44 RNFP 240 gr. L02-15275 60.00 110.00 .40/10mm FP 175 gr. L02-15336 57.00 106.00 .44 SWC 240 gr. L02-15276 60.00 110.00 .40/10mm FP 180 gr. L02-15337 58.00 107.00 .45 SWC 185 gr. L02-15269 50.50 94.00 .40/10mm RN 200 gr. L02-15338 60.00 112.00 .45 SWC 200 gr. L02-15270 53.00 98.00 .40/10mm FP 220 gr. L02-15855 66.00 123.00 .45 RN 230 gr. L02-15271 57.00 106.00 .44 RNFP 200 gr. L02-15882 60.00 112.00 .45 Colt RN 160 gr. L02-15293 55.00 101.00 .44 SWC 240 gr. L02-15891 69.00 129.00 .45 Colt RNFP 180 gr. L02-15295 51.00 94.00 .45 SWC 185 gr. L02-15856 58.00 108.00 .45 Colt RNFP 200 gr. L02-15272 53.00 98.00 .45 RN 200 gr. L02-15339 60.00 112.00 .45 Colt RNFP 250 gr. L02-15273 63.00 118.00 .45 RNFP 200 gr. L02-15857 60.00 112.00 Stock # 250 500 .45 SWC 200 gr. L02-15340 60.00 112.00 .45/70 Govt. RNFP 405 gr. L02-15321 $64.00 $120.00 .45 RN 230 gr. L02-15401 66.00 124.00 .45 RN No Lube Groove 230 gr. L02-19678 66.00 124.00 Stock # 250 500 .30/30 RNFP 158 gr. L02-15854 $27.00 $50.00

46 Pan Sifter & Ammo Can from Berry’s Manufacturing odeled after Mthe military .30 Caliber ammo can, this tough unit has a gasket in the lid to protect contents from moisture. It’s approximately 11” long x 7” high x 4” wide at its largest dimensions and holds 550 .223 rounds or n injection molded pan sifter that ﬁts on top of a 1000 9mms. Made Abucket to separate your brass from cleaning media. in the USA and comes with a lifetime warranty. Berry’s Mfg. Pan Sifter L02-17519 $9.99 Berry’s Mfg. Clear Ammo Can L02-17518 $9.99 SAVE YOUR BRASS!

he SHELLSORTER is a simple product designed to reduce Tthe time you spend sorting brass, allowing you to enjoy more time reloading and shooting. The SHELLSORTER is comprised of three pans designed to sort several common calibers. The fastest way to sort is to stack all three of the pans together on a common five-gallon bucket, yellow pan on top and black on the bottom; in that way, with a ick up your brass the easy way! This takes the hard few shakes all your brass is sorted by caliber at the same Pwork out of policing up your brass. No more aching time. The SHELLSORTER is made of ABS, a strong plastic back from bending over or kneeling at the range! that will give a lifetime of service. L02-21894 $44.95 L02-19972 $39.95 Stainless Steel High Bullet Puller Dial Caliper Tech Digital Caliper • .100 per revolution. • Covered track for longer caliper life – keeps chips out! • Made of hardened stainless steel. • Satin chrome finish. No glare. obody’s perfect. A bullet puller • Easily read to .001-inch on large, Accurate, Nmakes it easy to recover all your adjustable dial. components. • Measuring faces hardened, ground Easy to Read! Bullet Puller L02-17999 $29.95 and lapped. Puller Cap L02-17948 4.95 L02-13462 $28.00 L02-17171 $39.95 Collet Set L02-17947 5.99 Concealed Carry Tote47 $4500 L02-18193

illon’s Concealed Carry Tote accommodates all the tools ‘Plan B’ Day Planner Dyou need to survive the urban jungle! illon’s “Plan B” Day Planner Holster holds a handgun This low-profile carry case looks like a mild-mannered- Dand a spare magazine or pepper spray, yet it fits in with computer-nerd accessory, but it’s designed for your pistol as business clothing and won’t draw undue attention. It looks well as your PC! Made of rugged fabric, with heavy duty like a typical day planner, but inside there’s a holster that’s zippers on all three main compartments – one designed to adaptable for either right- or left-hand draw. It fits most hold a laptop computer, one for folders and paperwork, .380, 9mm, .40 and .45 caliber autos, including: Beretta, and one in the middle for a handgun. Colt, GLOCK, HK, Kahr, Kel-Tec, Ruger, Taurus, SIG, and Inside the case are pockets and pouches that will hold Smith & Wesson. Will also hold small-frame revolvers with spare magazines as well as folding knives, letter openers, two- to four-inch barrels. flashlights, cell phones, full-sized 8.5” x 11” paper note “Plan B” Day Planner L02-10252 $24.95 pads, etc. Measures 13.5” x 11.5” x 6.5” deep. TUFF PRODUCTS MAG POUCHES

Front view with flap. Front view without flap. Rear shows loops and Molle fasteners. uff Products Magazine Pouches are the most versatile we’ve ever Black 8-Magazine Single-Stack (1911) L02-19854 $39.95 Tseen. They can be worn on a belt or attached to anything that has Brown 8-Magazine Single-Stack (1911) L02-19855 39.95 a MOLLE fastener system; for instance, the Dillon Range Bag, a tacti- Black 5-Mag. Double-Stack (9/.40 GLOCK) L02-19856 39.95 cal vest or body armor carrier. Available in black or coyote brown. Brown 5-Mag. Double-Stack (9/.40 GLOCK) L02-19857 39.95 Comtech’s Baschieri & Pellagri STINGER 12 Ga. Target Slug HE STINGER: TComtech’s own personal defense device. Designed treamlight’s Nano Light® LED to act as a “force multipli- flashlight is super bright (10 er,” it’s like having the punching power of a S lumens), can be seen a mile away, is karate master – instantly! There’s really nothing like it for easy carry and access.It passes made of virtually indestructible un-noticed by 90 percent of people who see machined aluminum with an anodized finish, is weatherproof, it. Yup, just another “keychain device” to Reduced recoil, 1200 fps most, and yet it works so well when needed. 25 per box nearly weightless and fits on your You deserve a Stinger today! keychain or zipper pull tab! L02-19495 $9.95 L02-19214 $21.00 L02-19942 $11.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com 48

By Jim Schmidt, Arizona Ammunition, LLC. clean/polish for at least six hours for a high shine I’veLoading been working with Dillon Precision and clean, smoothfor finish. the Big .50 BMG equipment for about 19 years. Just about as long No, I’m not kidding on those cleaning instruc- as I have been professionally loading for the .50 tions. Once-fired military cases are extremely dirty BMG rifle. In the early days, the big 50 nearly on the inside and the outside. That dirt, grit and broke me. Unknowingly, I made the most com- residue can damage your expensive resizing die mon loading mistake handloaders make when and its parts. The dirt and debris can also directly loading the .50 BMG cartridge – thinking that interfere with or affect the actual sizing process. loading it would be the same as loading .308 So, first, get the cases clean! Winchester or similar. I found out the hard way One of the most important tools in your load- that it isn’t! Since then, I have become the ing room for the .50 BMG is a case gauge. The largest custom .50 BMG ammunition maker in case gauge is used to check the dimensions of the the world. A few years back I was introduced to case after you size it. Unlike the smaller calibers, the Dillon “Big Fifty Reloader” by the Dillon Pre- the .50 BMG case may not always size correctly cision research and development crew when the first time. Fortunately, Dillon Precision offers they loaned it to me to test and evaluate for the case gauge from L.E. Wilson and it’s a good them. This gave me the opportunity to reflect on one to use. The Wilson unit measures the head- all I’ve learned on loading for the big 50 over the space of the cartridge case and is NOT a chamber years. I’ve found that the Dillon .50 BMG gauge. Using the case gauge to inspect your sized reloader and its accessories make loading the .50 BMG cases, you’ll find that the once-fired .50 .50 BMG cartridge MUCH easier. BMG brass may have to be sized several times The .50 BMG case is huge, thick, and tough. before it fits in the gauge. Wilson’s case gauge also A loaded round can weigh a quarter pound! I’ve shows you the correct overall length. actually broken the base off of a reloading press Another important thing to know is that even while trying to size and decap a .50 BMG case. though the sized case fits the case gauge, it may Obviously, the primary use for the cartridge is in still not fit in your rifle’s chamber, depending on a heavy machine gun where they’re intended to how it’s cut. Remember that a case gauge measures be fired once and discarded. About 90 percent the cartridge “headspace” and is NOT a chamber of the cases available for the .50 BMG rifles gauge. So you also need to check them in your rifle. today are once-fired military. There are some Part of the incorrect fit can be the length of the new brass cases available but they’re very expen- brass case. Military cases generally have a little sive. Once-fired military cases are typically so more length to them to accommodate the need for dirty that I insist on cleaning them thoroughly as a good crimp on the bullet. That needs to be the first step of case preparation. They’ll likely trimmed off. I find that there’s no better way to trim have a black material on the inside of the neck the thick .50 BMG case than to use the Dillon .50 that is the sealant used to waterproof them as BMG Case Trimmer. The best way to describe the required in meeting military specifications. For- trimmer is that it “rocks and rolls” and deals with tunately, this sealant residue is easily removed the thick case with ease, speed and the precision using a solvent like mineral spirits. Just soak a required to properly trim the thick brass case. few at a time and it dissolves fairly quickly. I prefer to have the trimming done before I Why is it important to remove the black resize. Once cleaned and trimmed, you’re ready sealant? For accuracy loading you must have a to size and decap the case. This can be the tough- clean and consistent release of the bullet from the est thing you have to do to once-fired military case. If one area or the other of the case neck brass. Military primers are sealed and tightly hangs the bullet up, the release will be skewed crimped in the case and can be very tough to and it will affect accuracy. So let’s get the case as remove. One of the accessories available for the clean as possible. The process I use is this: Dillon reloader is a full-length sizing and decap- 1. Soak the case in a solvent to remove the ping die. It’s the only one available with a smooth black sealant. Some light brushing inside the neck carbide insert. The expander ball is also carbide may be required. Use a round nylon brush. and shaped in such a way that it goes in and out 2. Flush the case with soapy water (Dawn dish- of the brass case with very low friction or damage washing detergent works great) then rinse with to the neck and brass case mouth. The long handle clean water. and powerful leverage of the Big Fifty Reloader 3. Using a Dillon Vibratory Case Cleaner with also makes sizing and decapping easier. walnut media, clean/polish for six hours. This will Once the case is decapped, you’ll see that the give it a dull but consistent finish. It will also dry flash hole is dirty and should be cleaned, but that the brass case inside and out. comes later. I recommend that you now “process” 4. Again using a Dillon Vibratory Case Cleaner the brass case that has been sized, trimmed, and Dillon Rapid Polish 290 with corncob media, decapped, and cleaned. You should now chamfer 49

the inside and outside of the case neck, along with come with a “dome” topped configuration. For Loading for thechamfering Big the primer hole. The military.50 crimp best results BMG in a rifle, the primer needs to be pre- needs to be removed from the primer pocket for set (partly crushed or flattened) to depress the the best results in seating the huge .50 BMG “dome”. Using only the “flat” primer seater cup it primer. If you do not remove the crimp, you can’t will be easy. You’ll want to seat the primer at properly seat the primer. Dillon Precision offers a between 5 thousandths and up to 18 thousandths .50 BMG Primer Pocket Swager. Fortunately, you for the best results. With a little practice, you can only have to do this once to each case. check it with a caliper. You do not need the At this point, there are two ways to accomplish domed cup for rifles. the next step. You can clean and polish the brass Now that we have the brass ready to load, the case again and that will remove the Dillon Case next step is charging with powder and seating the Lube and such. In this process though, before bullet. With the manual indexing on the Big Fifty priming, you will need to hand clean the primer Reloader and the powder charging system pocket hole before seating the primer. I recom- attached as well as the Dillon 50 BMG Primer mend cleaning and polishing BEFORE loading. Seating Die, you can easily put the gunpowder in That way the primer pocket is clean and ready for the case and rotate to the bullet seater and you’re the primer seating. Or you can seat the primer, done! With the Dillon conversion/adaptor kit for a charge with powder, and install the bullet and powder measure, charging the case with powder then do a final polish on the loaded round in the can be easy and fairly fast. I prefer to measure Dillon Vibratory Case each load using my Dil- Cleaner. lon D-Terminator Elec- So let’s proceed with The most common tronic Scale. the priming of the case. You need to deter- The .50 BMG rifle per- mistake hand- mine the order you pre- forms its best when the fer when installing the primer is “pre-set”. All loaders make when dies in the toolhead of .50 BMG primers are the reloader. Be sure to made for a machine gun loading the .50 BMG keep the shell holder and they have a huge tight with a minimum and hard-hitting firing cartridge is amount of movement or pin. Misfires are nearly flexing so you have impossible. Not so with thinking that consistent bullet seating the .50 BMG rifle. The and overall length. firing pin protrusion on loading it will be One point that’s the majority of .50 important in loading for BMG rifles is between the same as loading the .50 BMG rifle, and 80 and 90 thousandths. much different than As a comparison a .308 Winchester. loading for a machine small-caliber rifle’s has around 55 to 65 thou- gun, is that you should not “crimp” the bullet into sandths protrusion. Short “shell holder” bolts on a the brass case. It’s a bad thing for rifle accuracy in .50 BMG rifle can have a very short firing pin any of the rifles offered today, even the semi-autos. spring and over time they can misfire on the If you’re using the Dillon Big Fifty Reloader to domed primer. I have seen issues many times with load for your machine gun (happiness is belt fed) both short and long firing pins. The springs can be and taking advantage of the 300 rounds per hour too weak. Machine gun firing pins are long and loading rate, you’ll want to crimp your bullets and hard-hitting with a very strong spring. use the domed primer cup on your primer seater. Dillon Precision offers a 50 BMG Primer Seat- All else is the same. ing Die that fits in the Big Fifty Reloader or it can A closing point for those of you loading for and be mounted (with a conversion kit) to the Dillon shooting the .50 BMG rifle. My friend Karl Hun- 50 BMG Primer Pocket Swager. It’s a pretty slick stiger is always a “Range Officer” at the .50 Cal- setup and easy to use. Once the 50 BMG Primer iber World Championships in Raton, New Mexi- Seating Die is set it takes one easy stroke to prop- co, at the NRA Whittington Center shooting range erly seat the primer. Again, far different than your each year. He told me that again the number one standard small-caliber primer seating. Remember problem that competitors have in the famous Fifty that the .50 BMG primers need to be pre-set or Caliber Shooters Association .50 BMG shoot was partly “crushed” to work correctly in a rifle. This is not firearms malfunctions, failures, or break- where confusion sets in for many who try to load downs; not optics or accessory equipment. Nope, the .50 BMG cartridge. The .50 BMG primer is it was the ammunition! Most often the ammuni- made for a hard-hitting machine gun and will tion was made incorrectly. DP 50“Big Fifty Reloader” STANDARD FEATURES: • 4-Station Interchangeable Toolhead • Uses Std. 1-1/2”-12 UNF Thread Dies • Manual Shellplate indexing • Average Loading Rate: 300 Rds./Hr. • Loads High Volume/Match-Grade Ammo • Milspec/Match-Grade Priming System • Ductile Iron/Carbon Steel Construction All for ONLY... Now Available! $ 95 .408 CheyTac Conversion L02-50204 $149.95 1019 (Dies NOT Included) L02-50000 Total price as pictured here with optional accessories: $2553.80 .50 BMg Carbide Size Die L02-50075 $869.95 .50 BMg Case Trimmer L02-50050 $384.95 BFR Mounting Post (50.5” High) L02-50150 $269.95 BFR Mounting Hardware kit L02-50140 $9.95 BFR Accessories A. 50 BMg CASE TRIMMER D. 50 BMg PRIMER SEATINg DIE ASSEMBLy One of these is included with Dillon’s Features an industry standard Big Fifty Reloader, but may be used as an 1-1/2”-12 UNF threaded body, accessory on a separate toolhead. The a 1/4 HP motor, replaceable primer seating die is adjustable for carbide cutter, quick-discon- enhanced control of primer seating. Includes two primer punches: one flat, nect cord and includes the .50 A. BMG trim die. match-style primer punch and one L02-50050, $384.95 cupped, milspec primer punch. L02-50200, $149.95 D.

B. B. 50 BMg CARBIDE SIzE DIE E. 50 BMg PRIMER POCkET SWAgER The only .50 BMG size die in the indus- Makes it easy to remove the military crimp. try that’s a full-length solid carbide size L02-50001, $299.95 die, for increased die life and scratch E.(1) PRIMINg CONvERSION resistance. It also has a solid carbide Converts Swager to Priming System. expander ball, placed in the middle of L02-50003, $76.95 the power stroke for easier operation. The die body is standard 1-1/2”-12 UNF F. 50 BMg PRIMINg SySTEM thread, and is manufactured to low Allows off-the-machine primer seating. chamber tolerance specifications. L02-50002, $299.95 L02-50075, $869.95 F. (1) SWAgER CONvERSION Converts Priming System to Swager. C. 50 BMg POWDER C. L02-50004, $76.95 MEASURE ADAPTER E./F. For use with the RCBS .50 BMG powder measure. RCBS LOADINg ACCESSORIES THAT CAN BE L02-50125, $76.95 USED WITH DILLON’S BIg FIFTy RELOADER .50 BMG Manual Powder Measure L02-21896, $114.95 ExTRA “BFR” TOOLHEADS L02-19831, $179.95 .50 BMG Seat/Crimp Die L02-21895, $139.95 The Dillon Deluxe 51 Pistol Cleaning Kit SACK-UPS “SAFE SACKS” FOR YOUR GUNS Sack-Ups Protective gun Sacks NEW! AR-15 Style Rifles L02-17378 $24.99 Handgun, 13.5” Gray L02-17249 7.99 Handgun, 13.5” Black L02-17250 7.99 Handgun, 13.5” Natural L02-17252 7.99 Shotgun, 42” Black L02-17253 10.99 Rifle/Shotgun, 52” Gray L02-17247 8.99 Rifle/Shotgun, 52” Black L02-17248 10.99 illon’s Deluxe Pistol Cleaning Kit includes: a Dewey Rifle/Shotgun, 52” Natural L02-17251 8.99 DNylon Coated Cleaning Rod; Dewey bronze bore Muzzleloader, 72” Gray L02-17254 11.99 brushes in .22, .38, .40 and .45; a Dewey patch loop; a Shotgun Rcvr., 24” Gray L02-17257 8.99 Dewey Nylon Gun Parts Cleaning Brush; a 4 oz. spray Shotgun Bbl., 36” Gray L02-17256 8.99 bottle of M-Pro 7 Gun Cleaner; a 0.5 oz. bottle of Snake Sack-Ups Old West gun Protection Oil; and a 4cc tube of Snake Oil Weapon Grease. Comes Single-Action Revolver L02-18000 $8.99 packaged in Dillon’s Large Utility Box. Lever-Action Carbine 42” L02-18001 10.99 L02-97066 $56.95 Buffalo Rifle 48” L02-18003 10.99 YOU Can Wear The “Dillon” Brand Dillon Precision, Long Sleeve Dillon Precision, Short Sleeve Navy, Large L02-18507 $19.95 Navy, L L02-18511 $12.50 Navy, xL L02-18508 19.95 Navy, xL L02-18512 12.50 Navy, xxL L02-18509 20.95 Navy, xxL L02-18513 14.50 Navy, xxxL L02-18510 22.95 Navy, xxxL L02-18514 14.50 gray, Large L02-18523 19.95 gray, Large L02-18527 12.50 gray, xL L02-18524 19.95 gray, xL L02-18528 12.50 gray, xxL L02-18525 20.95 gray, xxL L02-18529 14.50 gray, xxxL L02-18526 22.95 gray, xxxL L02-18530 14.50 L02-11319 11.95 Black, Large L02-18515 19.95 Black, Large L02-18519 12.50 Black, xL L02-18516 19.95 Black, xL L02-18520 12.50 Black, xxL L02-18517 20.95 Black, xxL L02-18521 14.50 Black, xxxL L02-18518 22.95 Black, xxxL L02-18522 14.50 Dillon’s 1911 Dillon Bushing Wrench Action Impact Reducers n easy, affordable way to protect your favorite 1911’s Aframe from being battered by recoil. Action Impact Reducers (6 ea.) L02-20516 $4.95 L02-11049 $2.50 Thinking about burying some guns? hese 532 gram DESI®PAK desiccants absorb moisture better than sili- Tca gel. It’s an industrial grade material that exceeds the requirements of Mil Spec MIL-D-3464E. Now available in smaller packages for other applications (ammo cans, long-term storage containers, etc.). DESI®PAK (2 bags, 1 card) L02-21435 $16.95 4-ounce bag L02-14694 4.95 2-ounce bag L02-14695 2.95 Humidity Indicator Card, 6 pack L02-21523 4.95 52REDDINGREDDING ReloadingReloading DiesDies && AccessoriesAccessories

Micrometer-Adjustable Competition Seat- .270 Winchester L02-10822 47.95 .243 Winchester L02-10172 36.95 ing Dies (These are individual dies.) .270 WSM L02-18337 47.95 .25-06 L02-11336 36.95 Competition Pistol Seating Dies 6.5 Grendel L02-19893 93.95 .260 Remington L02-09993 37.95 9mm L02-10671 $91.95 6.5 x 55mm Swedish L02-11353 47.95 .270 Winchester L02-11806 36.95 .38 Super Auto L02-10672 91.95 6.8 SPC L02-12548 64.95 7mm Rem. Mag. L02-11392 36.95 .38 Special/.357 Mag. L02-10673 91.95 7 x 57mm Mauser L02-11212 47.95 .308 Win./7.62 NATO L02-10165 36.95 .40 S&W/10mm L02-10674 91.95 7mm WSM L02-18339 64.95 .30-06 L02-11763 36.95 .44 Special/.44 Mag. L02-10675 91.95 7mm Rem. SA UM L02-18338 64.95 .300 Win. Mag. L02-11108 36.95 .45 ACP L02-10676 91.95 7mm Rem. Ultra Mag. L02-18340 64.95 .45 Colt/.454 Casull L02-10677 91.95 7mm Rem. Mag. L02-11775 47.95 Crimp Dies Competition Rifle Seating Dies 7mm-08 Remington L02-12041 47.95 .32 S&W/H&R Mag. L02-11747 $27.95 .45-70 Gov’t L02-11197 $91.95 7.5mm Swiss L02-09995 81.95 .45-70 Gov’t L02-11977 35.95 Complete Three-die sets – Size, bell, seat 7.62 x 39mm Russian L02-12045 62.95 Powder Measure, Reloading Accessories .32 ACP L02-15521 $64.95 .30-30 Winchester L02-29020 47.95 Match-Grade Model 3 BR Measure .32-20 Winchester L02-11906 64.95 .30-40 Krag L02-11835 77.95 L02-10121 $179.95 .38-40 Winchester L02-11838 84.95 7.62 x 54mm Russian L02-09994 62.95 Large (7.5”) Powder Reservoir .38-55 Win./Ballard L02-19106 81.95 .300 AAC Blackout L02-12550 84.95 L02-10123 $12.95 .44-40 Winchester L02-11692 47.95 .300 WSM L02-15763 47.95 X-Large (10”) Powder Reservoir .45-70 Gov’t L02-12700 64.95 .300 Rem. SA UM L02-18341 62.95 L02-10124 $13.95 Complete Two-Die Sets .300 Rem. Ultra Mag. L02-18342 47.95 Powder Trickler L02-11986 $26.95 .204 Ruger L02-12547 $47.95 .300 Weatherby L02-11354 47.95 Stuck Case Removal Kit L02-12186 $23.95 .22 Hornet L02-11484 47.95 .300 Win. Mag. L02-12046 47.95 Specialty/Custom Die Sets .220 Swift L02-12182 47.95 .303 British L02-11691 64.95 .22-250 L02-15761 47.95 8 x 57mm Mauser L02-09996 47.95 .50 AE L02-14514 $49.95 .243 Winchester L02-15762 47.95 .338 Win. Mag. L02-11774 47.95 (Incl: RCBS steel size, expander, seat/crimp) .243 WSSM L02-11193 47.95 .338 Lapua Mag. L02-21354 128.95 .500 S&W L02-11114 $49.95 .25-06 Remington L02-12183 47.95 Individual Dies: Neck-Size-Only Dies (Incl: RCBS steel size, expander, seat/crimp) .25 WSSM L02-11194 50.95 .223 Remington L02-10164 $36.95 RCBS Carbide .500 S&W Size Die only .260 Remington L02-09997 47.95 .22-250 L02-11184 36.95 L02-19923 $40.95 Dillon’s New Bench Wrench RCBS EQUIPMENT Fits new 1” die lock rings

characteristic of virtually all progressive reloading ma- Achines, regardless of brand, is that the dies are set rather close together. When you are first setting up a “naked” machine, there is plenty of wrench room, but if you have a need to adjust a die afterward, it often requires a delicate touch to maneuver a lock ring on a crowded toolhead. Dillon Precision has addressed this in two ways. We now offer new 1” die lock rings and a 1” Bench Wrench to fit them. This combination gives much more room to re-adjust dies after they’re already mounted. The opposite end of our Trim Pro-2™ Case Trimmer kit L02-43231 $139.95 The RCBS Trim Pro-2 manual case trimmer now features a new wrench is a 7/16” box-end for adjusting the Powder Bar spring-loaded “universal” shell holder that will accommo- of any Dillon Powder Measure. Our new lock rings fit any date case head diameters from .250” to .625”. Comes with standard 7/8” x 14 dies. pilot calibers: .22, .24, .25, .27, .28, .30, .35, .44 and .45. 1” Dillon Die Lock Ring L02-14067 $1.35 RCBS Scale Check Weights Standard Set: 60.5 grains for powder charges. 5-Pack of Die Lock Rings L02-10669 4.15 L02-12297 $34.95 1” Dillon Bench Wrench L02-10842 7.95 Deluxe Set: 510.5 grains for bullets, cases and powder. (Buy two or more 1” Bench Wrenches for $7.10 each) L02-12458 $49.95 Wrench/Lock Ring 5-Pack L02-10668 9.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com 53 Apex Tactical Specialties Armorer’s Block Grace USA Gun Care Tool Set his custom Tdesigned 12” x 9” x 1-1/2” case is made from durable soft Nukaf and contains a 17-piece set of Grace USA Gun Care Screwdrivers (8 ea.), Solid Brass Pin Punches (8 ea.) pex Tactical Specialties’ Armorers Block is designed and a specially fab- Afor S&W Semi Auto M&P Pistols in all calibers, sizes ricated 8 Oz. Brass and conﬁgurations, including thumb-safety models and Hammer. The the M&P Shield; also for GLOCK® semiauto pistols in all screwdrivers are sizes and calibers. The Armorer’s Block supports a pistol hand-assembled for armory work and detail disassembly. Its pre-positioned and custom hollow bosses, slots and holes remove pressure from critical ground to fit scope function surfaces while pins are driven in and out. High- screws, plug screws, guard screws, etc. The handles are density polymer construction prevents marring of the turned from quality Maine hardwood and protected with frame while driving pins in and out. Made in USA. a smooth finish. Made in USA. Armorer’s Block L02-19536 $29.95 Grace USA Gun Care Tool Set L02-10680 $99.95 Bondhus Hex Key Sets More Great Tools From Grace USA!

Grace USA’s 7-Piece Steel Roll Pin Punch Set includes the following sizes: 1/16”, 5/64”, 3/32”, 1/8”, 5/32”, 3/16”, and 7/32”. Each is proudly Made in USA! Roll Pin Punch Set L02-15065 $39.95 About Grace USA: Grace USA gun care products are made with precision, and de- Grace USA’s 9-Piece Ball-End Allen Head signed specifically for gun enthusiasts Screwdriver Set includes the following sizes: who care about keeping their firearms in 1/16”, 5/64”, 3/32”, 7/64”, 1/8”, 9/64”, prime condition. We are proud of our prod- Ball-end set L02-13286 $12.95 5/32”, 3/16”, and 3.5 mm. Each is con- ucts and look forward to providing you Gorilla Grip Sm. L02-16822 5.45 structed of US 8650 Chromium-Vanadium with durable tools that fit your needs and Gorilla Grip Lg. L02-16823 6.35 steel alloy and is proudly Made in USA! guarantee satisfaction. Gorilla Grip Set L02-22142 10.75 Ball-End Allen Set L02-15063 $49.95 DOC ALLEN’S VERSATOOL

The B-Square 32 Piece gun- grace USA gunsmith Hammer smith Screwdriver kit con- and Punch Sets tains 11 slotted bits oc Allen’s Versatool fits eas- 8 oz. Brass Hammer designed to eliminate screw Dily in your pocket and func- L02-14969 $14.95 head damage, 8 hex bits, 3 tions as either a screwdriver or a The Tru-Weight Trigger Ten- 16 oz. Brass Hammer Phillips bits, 2 Posi-Drive wrench. The Versatool includes sion Scale has a range from L02-15069 $18.95 bits, 2 Torx bits, 3 extra-long 11 tool bits and an extension eight ounces to eight pounds. Brass Punches (8-Pc.) bits (1 each: Phillips, slotted, shaft with the loop handle. The A unique weight indicator L02-14968 $31.95 hex), and a 1/4” socket drive loop slides to three different remains at the exact point of Steel Punches (7-Pc.) adapter. Get one for your trigger release, making it eas- L02-15070 $31.95 positions to provide varying workbench AND your range degrees of leverage to suit the ier to read your trigger pull 8 oz. Brass Hammer and 8-pc. bag! needs of the job at hand. pressure. Brass Punch Set L02-15757 $12.95 L02-14838 $26.95 L02-21655 $39.95 L02-18410 $29.95 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 54 HARTMANHARTMAN MFGMFG TargetTarget StandsStands

Rugged! Portable! Pistol Targets: 100 per package Easy-to-Use! NRA Paper D-1 “Tombstone” Target 23”x35” L02-18388 $39.95 IDPA Paper Practice Target 22”x34” L02-15735 39.95 USPSA/IPSC Paper Practice Target 22”x35” L02-15836 39.95 50 Foot TIMED/RAPID FIRE 10.5”x12” L02-15832 7.95 Competition 50 Foot SLOW FIRE 10.5”x12” L02-15831 7.95 Competition 25 Yard SLOW FIRE 10.5”x12” L02-13096 8.50 Police (Silhouette) 25 Yard 14”x24” L02-13163 12.50 Police (Silhouette) 25 Yard 22.5”x35” L02-10094 27.50 Competition 25 Yard RAPID FIRE 21”x24” L02-12839 17.50 Competition 50 Yard SLOW FIRE 21”x24” L02-10041 17.50 Police (Silhouette) 50 Yard 22.5”x35” L02-10670 27.50 Rifle Targets: 100 per package Small Bore Rifle 100 Yard 14”x14” L02-12430 $7.50 High Power 200 Yd. 21”x24” (600 Yd. reduced)L02-12650 34.50 Replacement Center 100 per package Pistol 25 Yard B8P Repair Center 10.5”x10.5” L02-12676 $4.95 One Target Stand L02-18237 $44.95 200 Yard Rifle Repair Center 12.75”x12.75” L02-15830 13.45 A Pair of Stands L02-74493 79.95 Target Pasters One Hostage Target Adapter (Shown Black, Self-Adhesive, 500 ea. L02-16304 $3.00 above in contrasting color for clarity. Buff, Self-Adhesive, 500 ea. L02-16309 3.00 Works only with Hartman target stands.) Brown, Self-Adhesive, 500 ea. L02-16310 3.00 L02-11697 22.95 White, Self-Adhesive, 500 ea. L02-16313 3.00 A Pair of Target Spikes (Inset) NRA Pistol and Rifle Targets Orange, Self-Adhesive, 500 ea. L02-16327 3.00 L02-11393 22.95 Bennie Cooley’s D•WIPE Towels D•LEAD Hand Soap ESCA TECH, INC. ESCA TECH, INC. Safety Magazines •WIPE Towels riginal D•LEAD Dwere specially OHand Soap designed for immedi- quickly cleans heavy ate clean up of most metals as well as contaminants without paint dust and firing water. The soft 5.5”x range residue from 8” towels are satu- the skin and finger- • Weighted to simulate a fully loaded mag rated with a unique nails. Removes lead, • 1911 practice mag works for all calibers cleansing formula nickel, cadmium, ar- • Mags for GLOCKs work in 9mm/.40 cal. and aloe vera, and senic, mercury, silver, • If necessary, fitting is easily done with will remove heavy zinc and most other any file metals from skin and heavy metals. 1911/Clones L02-16866 $14.95 other surfaces. GLOCK 17, 22 L02-16872 14.95 40 Soft Towels L02-19916 $4.95 8 Oz. Bottle L02-19915 $2.95

gunslinger Spring kits From Lee Fisher, one of the premier “cowboy gunsmiths.” ake out your frustrations, and build Colt & clones L02-20510 $26.95 Ruger Blackhawk/Vaquero Tyour grip strength at the same time! L02-20511 $24.95 Just think about…oh, socialized medi- Marlin 94 L02-20512 $18.95 cine, tax increases, high-capacity mag- Rossi/Navy Arms 92 lever guns Peacemaker Specialists’ azine bans, etc. L02-20513 $24.95 These wooden-handled screwdrivers 1 lb. L02-15532 $7.99 Stoeger IGA shotgun were designed to fit most SAA screws. 2 lb. L02-15533 $14.95 L02-20514 $14.95 SAA 2-Driver Set L02-15486 $19.95 Note: These Come in Assorted Colors 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com 55 Otistis Technology’s Technology B.O.N.E.® Tool effec- B.O.N.E. Tool and RIPCORD Otively cleans the AR-15 bolt carrier assembly area including the bolt, bolt carrier and firing pin. he RIPCORD™ is a rapid firearm cleaning sys- Ttem featuring Nomex® fibers that act as both a brush to loosen and a patch to capture fouling particles. Otis Technology B.O.N.E. Tool L02-18985 $24.99 Otis Technology RIPCORD .223 L02-18965 14.99 Otis Technology RIPCORD .308 L02-18981 14.99 Otis Technology RIPCORD 9mm L02-18982 14.99 Otis Technology RIPCORD .40 L02-18983 14.99 Otis Technology RIPCORD .45 L02-18984 14.99 Sun Devil Mfg. AR-15/10 ADIGS EGW AR-15 Forward Assist Plug un Devil Manufac- volution Gun Works’ AR- Sturing’s Adjustable E15 Forward Assist Plug is Drop In Gas System for for use on competition rifles AR-15 and AR-10 rifles that do not use the forward allows you to adjust assist. It’s anodized for long your rifle’s gas system life, matted to match most for best performance. uppers. L02-19674 $59.95 L02-18991 $9.99

oes Dyour ACCOM’s Enhanced Firing Pin for .22 Long TCiener/CMMG .22 Long Rifle AR- Rifle insert 15 caliber conversions is a direct- he TACCOM Extreme Extractor is move back and replacement firing pin, made from 17- Ta drop-in part for your forth in your AR 4 SS heat treated to a condition H900, Ciener/CMMG .22 Long Rifle insert upper? The TACCOM to present a tough, hard firing pin that that will give you consistant extrac- Pressure Plug will apply a constant won’t break or mushroom out after tion, which is KEY for a reliable pressure on your insert, always keep- many firings. The tip has been firearm. This will help with your live- ing it in the most forward position designed to stick out of the hole only round extraction, depending on how when the rifle is in battery. You can .030”, so you will not damage your well the factory has cut the chamber, install and remove the pressure plug barrel by dry firing your weapon. and the type of chamber cut. in seconds with no tools. L02-19538 $13.95 L02-19539 $10.95 L02-19533 $7.95 ™ MILDOT MASTER The Larry 8 LED itsabox! Pocket Work Light

he Larry™ 8 LED TPocket Work Light is the essential handyman light. 8 powerful LEDs provide 60 lumens of bright white light. The rotating magnetic clip gives you convenient hands-free lighting. The reinforced plastic body design is shock-proof ou can become a master at using and water-resistant, Ya Mil Dot reticle with this ballistic making the Larry™ ba- slide rule! Comes with a 24-page sically indestructible. instruction manual. L02-15432 $9.99 7.5” x 14” x 10” Mildot Master® L02-14762 $29.95 L02-14239 $14.95 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 56 California Competition Works’ Moon Clip Loading/Unloading Tools & Carriers

A. B.

G. F. E. D. C. A. Demooner Tool L02-18169 $16.95 E. Blued .45 ACP Moon Clips (10 ea.) L02-18183 9.80 B. MoonLoad/Unload 8-Shot .357 L02-19490 39.95 Not Pictured, Generic Stainless Steel .45 ACP Moon Clips C. MoonLoad/Unload 6-Shot .45 L02-19489 39.95 (10 ea.) L02-18280 10.50 (Will work with #16510 8-shot EDM .38/.357 moon clips on Pg. 57) F. 10mm Moon Clips (10 ea.) L02-18184 11.20 D. 6-Shot Moon Clip Holder (2 ea.) L02-18173 17.90 G. 8-Shot .357 Moon Clips (10 ea.) L02-19228 19.95 TK Custom NorthSpeed Loader Mountain Holder

The North Mountain IDPA- Moon Clips Compliant Speed Loader Holder is made specifically for the competitive Chiappa Rhino 9mm/.40 S&W (10 Pk) L02-12040 $65.00 IDPA revolver shooter. Chiappa Rhino .38/.357 (10 Pk) L02-12043 65.00 Lightweight at 2.9 Oz., it N-Frame 9/.38 ACP 8-Shot (Blue) (10 Pk) L02-12044 39.95 firmly holds your competi- L-Frame 9/.38 ACP/.40 6-Shot (Blue) (10) L02-12057 39.95 tion speed loader. It is fit- S&W N-Frame .45 ACP 6-Shot (10 Pk) L02-12058 19.95 ted with a Tek-Lok™ to S&W N-Frame .45 ACP EDM 6-Shot (10) L02-12059 74.95 mount to your range belt. S&W L-Frame .38/.357 7-Shot (10 Pk) L02-12065 64.95 It fits Comp III and similar- S&W L-Frame .38/.357 6-Shot (10 Pk) L02-12066 64.95 sized speed loaders. S&W J-Frame .38/.357 5-Shot (5 Pk) L02-12088 32.50 “K-Frame” Model S&W K-Frame .38/.357 6-Shot (10 Pk) L02-12090 64.95 L02-21900 $35.00 S&W N-Frame .38/.357 8-Shot EDM (10) L02-12091 64.95 “L-Frame” Model N-Fr. .38/.357 8-rd. EDM Starline ONLY(10) L02-12092 64.95 L02-21914 $35.00 S&W N-Frame .38/.357 8-Shot (Blue) (10) L02-12093 39.95 W.C. Wolff Co. Jerry Miculek SDM Revolver Springs Competition S&W Revolver (Hammer/Trigger Return Springs) Ruger GP-100 Grips Front Sights L02-11367 $10.50 SP-101 L02-12598 9.50 $79.95 Pin-In Front Sight – $28.00 “Classic” Slip-In Sight – $35.00 S&W J Frame .250” high, red L02-18379 .250” high, red L02-18375 L02-12189 9.00 .250” high, green L02-18380 .250” high, green L02-18376 (Mainspring/Rebound Springs) .300” high, red L02-18381 .300” high, red L02-18377 S&W K,L,N (standard) .300” high, green L02-18382 .300” high, green L02-18378 S&W N-Fr. Rd. Butt L02-11324 L02-15073 $15.00 Pin-In Front Sight – $44.95 “Classic” Slip-In Sight – $44.95 N-Fr. Sq. Butt L02-11325 .250” high, Gold Bead L02-18565 .250” high, Gold Bead L02-18567 S&W K,L,N (reduced power) K, L-Fr. Rd. Butt L02-11327 .300” high, Gold Bead L02-18566 .300” high, Gold Bead L02-18568 L02-15072 15.00 K, L-Fr. Sq. Butt L02-11326 Tools from L. Bengtson Arms Co. for Smith & Wesson Revolvers Hogue “Big

A. Butt” Grips

B. Hogue Competition $59.95 S&W Revolver Thumb Latch A. Rebound Spring Tool L02-30000 $22.00 fits k, L, and N-Frames S&W N-Fr. Rd. Butt L02-12141 B. Ejector Rod Tool L02-25343 45.00 Stainless L02-19921 $59.95 K, L-Fr. Rd. Butt L02-12140 Johnson Precision California Competition Works57 Mag Rack Moon Clip Retention Systems .22 LR Speedloader

ohnson Precision’s Mag Rack™ moon clip retention system alifornia Competition Works’ 10-Round Speedloader for S&W Jholds eight of your moon clips in place with strong magnets. The CModel 617 .22 LR Revolvers is ideal for Steel Challenge or Mag Rack may be permanently attached to a belt with included Ruger Rimfire Series competition. The speedloaders are machined fasteners, or temporarily with the optional belt loops. from 6061 T6 aluminum, then black anodized. The Loading Block Mag Rack, 8-Shot 627 L02-25367 $149.95 (inset photo) is CNC machined from polymer and holds 120 rounds Mag Rack, 7-Shot 686 and 6-Shot 625 L02-25368 149.95 of .22 LR ready for insertion into speedloaders. Accessory Belt Loops L02-25369 9.95 CCW Model 617 Speedloader L02-12623 $34.95 CCW .22 LR Loading Block/Case L02-12627 49.95 Stainless EDM 8-Shot Moon Clips NorthMoon Clip Mountain Holder

hese .025 EDM TStainless Moon $ 95 Clips are designed 59 to fit Remington L02-16510 brass SNUGLY, Sold in Packages of 10 ’ve tried several methods of holding my moon clips, and this eliminating nasty for 8-Shot S&W Iworks best for me! My hand only has to go to one place, so I no “cartridge flop” 627 Revolvers longer grope around frantically for my reloads. – Mark Pixler when you reload. For 610/625, 7-Shot 686, 8-Shot 627 L02-21883 $130.00 Safariland Competition Gear for Revolver Enthusiasts 002 “Cup Challenge” $69.95 6” S&W K,L,N; Std. bbl. L02-17788 333 “Speedloader Holder” $34.95 S&W K-Frame L02-12411 S&W L-Frame L02-13087 “Competition Speedloaders” $19.95 S&W K-Frame L02-13224 S&W L-Frame L02-13117 Revolver “Speedloaders” $11.95 S&W J-Frame (5-Shot) L02-12405 S&W K-Frame L02-13104 S&W L-Frame L02-13074 “Speedloader” Holders $9.95 Sm./Med. Fr. L02-10340 “Speedloader Loading Blocks” $24.95 S&W K-Frame L02-12262 S&W L-Frame L02-12878 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 58 Performance Parts for Your GLOCK® Firearm

A. B. C. D.

E. F. G.

GLOCK® Factory Original Parts: Wolff Spring Co. Parts for GLOCK firearms: A. Extended Mag Release (Small Frame) L02-18569 $9.95 Competition Spring Set L02-11524 $9.95 B. Extended Slide Release L02-18570 19.95 Trigger Return Spring 3-Pack L02-11818 7.99 C. Striker Cups (The ones you always lose.) L02-19325 4.95 X-Tra Power Trigger Rtn. Spr. 3-Pk. L02-15558 7.99 D. Striker Channel Liner L02-18881 9.95 Guide Rod, GLOCK 17, 22, 31 L02-11356 24.95 Lone Wolf Parts for GLOCK firearms: Guide Rod, GLOCK 19, 23 L02-11435 24.95 E. Extended Mag Release (Large Frame) L02-19115 4.99 Guide Rod, GLOCK 20, 21 L02-11352 24.95 F. Extended Take-Down Lever L02-19114 9.95 Recoil Spring, 12# L02-11420 7.99 G. 3.5# Trigger Stop Connector L02-16501 14.95 Recoil Spring, 14# L02-11418 7.99 Extended Slide Stop L02-22299 15.99 Recoil Spring, 15# L02-11419 7.99 Competition Guide Rod Kit Jentra

he Jentra Competition Guide Rod Kit for GLOCK Gen4 G- spring for faster and easier spring changes, and comes with a pre- T17/G-34 type slides features the largest diameter hardened mium quality Wolff (15 lb.) recoil spring. stainless steel guide rod for less muzzle rise. It has a non-captured L02-17106 $31.95 Lone Wolf Distributors’ Match-Grade Barrels for GLOCK Pistols

hese replacement barrels are manufactured from the highest GLOCK 20 9x25 Dillon Conversion Barrel L02-19807 114.95 Tgrade mill-select 416 stainless forgings. Standard land-and- GLOCK 21 .45 ACP Barrel L02-19242 99.95 groove rifling makes these an excellent choice if you wish to shoot GLOCK 22 .40 S&W Barrel L02-11526 99.95 lead, plated or jacketed bullets. Can be used in factory ported or GLOCK 22 9mm Conversion Barrel L02-11527 99.95 stock pistols. Ready to use, pre-fit drop in. No gunsmithing required. GLOCK 22 .357 SIG Conversion Barrel L02-19808 99.95 GLOCK 17 9mm Barrel L02-19167 $99.95 GLOCK 23 .40 S&W Barrel L02-19327 99.95 GLOCK 19 9mm Barrel L02-19326 99.95 GLOCK 23 9mm Conversion Barrel L02-19328 99.95 GLOCK 20 10mm Barrel L02-19241 99.95 GLOCK 34 9mm Barrel L02-19330 99.95 GLOCK 20 .40 S&W Conversion Barrel L02-19805 99.95 GLOCK 35 .40 S&W Barrel L02-19329 99.95 GLOCK 20 .357 SIG Conversion Barrel L02-19806 99.95 GLOCK 35 9mm Conversion Barrel L02-19331 99.95 Slide Removal Tool 10-8 Performance Armorer Tool STUL Fits All GLOCK Models ngages the slide lock and provides a Emechanical advantage making slide removal easier and faster. For those with large fingers, small fingers, tired fingers, anyone he 10-8 Performance Armorer Tool is a simple, non-marring looking for a way Ttool useful for applications where prying or poking with metal to simplify the removal tools can easily damage your work. The rigid chisel-pointed end of your GLOCK slide. and semi-flexible flat blade end each have unique uses. L02-19527 $11.95 L02-15434 $7.95 TARAN TACTICAL59 Henning BATTLEHOOK INNOVATIONS

$94.95 w/Fiber Optic Front Sight

GLOCK 17, 19, 22, 23, 24, 26, 27, 33 L02-12031 GLOCK 20, 21, 29, 30, 31, 32, 36 L02-12032 Sight Set, GLOCK® L02-15381 $84.99 Why, California Competition THE It’s Works Enlarged “The Magwells for PLUG $795 Perfect GLOCK® Pistols Installs in a snap and protects your GLOCK’s internal parts from dust, dirt, rain, snow and lint. Knife!” GLOCK Models 17, 19, 20, 21, 22, 23 (fit may vary) L02-18161 Model 21SF L02-19925 Models 26, 27, 33 L02-10235 Model 30 L02-10648

PEARCE For GLOCK 17, 19, 22, 23 GRIP, INC. L02-12523 $46.00 $995 Grip extensions do not alter mag. capacity. GLOCK 26/27 L02-10346 G29 (10 rd.)/30 (9 rd. opt. mag.) L02-10355 G30 (10 rd. mag. only) L02-10356 Kel-Tec P11/Taurus PT111 L02-18586 Springfield XD (9mm/.40 only) L02-18587 Springfield XD-S L02-15286 Mag. extensions add additional capacity. GLOCK 10mm/.45 ACP (+2) L02-18589 ® GLOCK 9/.357/.40 (+2 or 1) L02-18588 GLOCK Field Knife G27/33 (+1) L02-18590 For GLOCK 20, 21 L02-15483 $29.95 L02-12525 $46.00 GLOCK® Mags Just What’s Listed, While They Last! GTUL

rredondo’s extended magazine base Apad adds capacity to your magazines! The Arredondo base pad comes with a new spring and an installation tool that also acts as a floorplate removal tool you’ll need to leaning your GLOCK magazines has disassemble and clean your mags. Cnever been easier! GTUL has devel- Small-Frame GLOCK L02-19125 $39.95 oped an integrated system to disassemble Large-Frame GLOCK (not for 29/30) and clean all GLOCK magazines without L02-19124 39.95 G-17 L02-11363 $39.95 marring, gouging, or damaging the metal Base Pad & Spring kit for Springfield xDs G-19 L02-15806 39.95 liner. Quickly removes dirt, dust, powder XDM L02-15569 $23.00 G-21 L02-15807 39.95 residue and grime! .45 XD (+3) L02-15570 23.00 G-22 L02-11958 39.95 Standard Mags L02-20910 $21.95 Base Pad kit with Spring for S&W M&P G-23 L02-11960 39.95 Large Mags L02-20911 21.95 9mm/.40 M&P L02-19104 $23.00 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com 60 Get a Grip With Hogue

A. B. C. D. E.

F. G. H. I. J.

(C.) Beretta 92 (Finger Grooves) L02-16660 $17.95 (D.) Colt GM (Finger Grooves) L02-12803 17.95 Ruger Mark II, RH L02-16664 17.95 Hogue square Butt Monogrips Colt Python L02-12138 $17.95 (E.) K, L-Frame Square Butt L02-12786 17.95 N-Frame Square Butt L02-12145 17.95 K. N-Frame Round Butt L02-18100 17.95 Hogue Round Butt Monogrips Ruger SP-101 L02-14833 $17.95 S&W J-Frame Round Butt L02-12277 17.95 K, L-Frame Round Butt L02-12549 17.95 the Hogue HANDALL™ Grip sleeve fits many semi-autos. (F.) HandAll L02-14463 $8.95 the Hogue HANDALL™ Hybrid Grip sleeve Hogue Rubber AR/AK Pistol Grips (G.) Ruger LCP .380 Auto L02-14477 $9.95 (A.) AR-15s L02-14537 $34.95 (H.) Springfield XD 9mm/.40 L02-14478 9.95 AKs L02-14538 34.95 (I.) Smith & Wesson M&P 9mm/.40 L02-14479 9.95 Hogue Rubber OverMolded® AK-47/74 Handguard Kits Hogue Bantam Boot Grips (K.) Standard Russian/Chinese Rifles L02-14556 $49.95 (J.) S&W J-Frame Round Butt L02-11054 $17.95 Yugo-Version Rifles w/Longer Guard L02-14558 49.95 K, L-Frame Round Butt L02-11055 17.95 Hogue eXtReMe seRies G-10 1911 Grips Hogue Hex Head 1911 Grip screws (Four-screw set). (B.) For guns w/S&A-style magwells L02-14562 $59.95 Blue L02-15723 $8.99 Hogue Rubber Pistol Grips Stainless L02-15722 8.99 DeSantis Clip-Grip® his replaces the grips on TS&W J-Frame round butt revolvers. A hook on the right grip panel functions as stop- ping point for the revolver when tucked into your waistband. he ERGO L02-19371 TGrip Delta Grip™ $29.99 is the first truly ergonomic grip for J Frame revolvers. Designed for the most important part of the gun, the shooter, the Delta Grip was engineered to fit the natural point of aim and mechanics of the human hand, wrist and arm. The result is a grip with a superior natural point of aim, comfort and control. Fits round butt J-Frames. Will not fit on Smith and Wesson Bodyguard 38 Model (sku 103037 and 103038). L02-19684 $19.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com PPoowwddeerr RRiivveerr PPrreecciissiioonn,, IInncc:: 61 PPeerrffeeccttiinngg YYoouurr XXDD//XXDDmm

Powder River Precision x-Treme grips: CNC Laser Cut XDm 9/40 Drop-In Trigger Kit L02-15226 $125.00 360º grip Enhancement for your xD/xDm, made of XDm 45 Drop-In Trigger Kit L02-15236 125.00 high-quality adhesive-backed traction tape. XD 9/40 Drop-In Trigger Kit L02-15228 125.00 X-Treme Grips, XDm 45 (Sand) L02-15229 $16.95 XD 45 Drop-In Trigger Kit L02-15227 125.00 X-Treme Grips, XDm 9/40 (Sand) L02-15230 16.95 XD-S Trigger Spring Kit L02-15237 $19.95 X-Treme Grips, XD 45 (Sand) L02-15231 14.95 Powder River Precision’s Ergonomic Punch Set for the X-Treme Grips, XD 9/40 (Sand) L02-15232 14.95 xD/xDm made of hardened 416 stainless steel with Powder River Precision’s Drop-In Trigger kits for Spring- hard-molded rubber handles designed to fit comfortably field xD Pistols will give you a short, crisp trigger pull in the palm of your hand. with a fast reset and shorten the total trigger pull length. XD/XDm Punch Set L02-15233 $30.00 Apex Tactical Specialties Parts for Smith & Wessons

A. S&W M&P Pistol Sear B. S&W M&P Competition Spring Kit C. S&W M&P Ultimate Striker Block Kit

A. S&W M&P Pistol Sear M&P 9/40 L02-21889 $41.95 M&P 45 L02-21892 41.95 B. S&W M&P Competition Spring kit M&P 9/40 L02-21891 25.95 C. S&W M&P Ultimate Striker Block kit M&P 9/40 L02-21890 35.95 D. Duty/Carry Spring Kit for S&W J-Frame Revolvers E. S&W Revolver D. S&W J-Frame Spring kit L02-14309 25.95 (w/frame-mounted firing pin) Frame-Mounted Firing Pin E. S&W Revolver Firing Pin L02-21888 15.95 TARAN TACTICAL INNOVATIONS

A. B. C.

D. E. F. G.

A. Baseplate/Spring Kit, GLOCK® L02-15375 $39.99 B. 11-Coil Spring, STI/SVI Mags. L02-15379 8.95 E. Follower, SVI Mags. L02-15378 $9.95 C. Baseplate/Spring Kit, S&W M&P L02-15380 39.95 F. Short Baseplate, GLOCK® L02-15376 29.99 D. Follower, STI Mags. L02-15377 9.95 G. 4mm Baseplate, STI/SVI Mags. L02-15382 32.95 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 62 Practice Can’t Make Perfect if You Don’t Practice

Want to be able to fire a .45 auto with hardball so well the gun is down out of recoil and aimed-in again when the empty shell casing has travelled only a few inches from the ejection port? Practice. By Duane Thomas do it. It wasn’t even close. He hadn’t put in the One curious thing I have noticed over my years time. Finally he said to me, “Well, I guess that’s in the gun community is that many people – who the difference between firing a combat gun and have a self-image as serious, dedicated gun peo- a racegun.” ple, even gun carriers – never practice. There are Maybe I should be been nicer about it. Maybe I people in the world who carry guns they’ve never should have allowed his little ego saving self-delu- fired, and have been doing so for years. I know sion. Maybe I should have bought into the idiocy. this is true, because I know some of them. They But the truth is I just have a really low BS toler- never practice. Never. ance for this sort of thing. Of course, then you have those people who do My reply was, “Yeah…my Glock 34 racegun. practice, but to a very occasional, non-dedicated You DO know this is just a Glock 17 with the slide level. Sometimes you’ll meet them out at training and barrel 4/5ths of an inch longer, right?” classes, and when you’ve just performed a drill “Well, I still think it’s the difference between fir- WAY beyond what they can do, they look at you ing a combat gun and a racegun.” He was smirking, and say, “Well, you practice.” And lemme tellya he had the perfect answer. It couldn’t possibly be what, they are ACCUSATORY about it. Like the that I had just worked harder than him. only way you can outshoot them is because you’re “Really. And here I thought the daily dry fire engaging in this underhanded, unfair activity. sessions and the fact I’ve fired over 100,000 Then you have the people who want to blame rounds of live ammo out of Glock 9mms might it on the guns. I went shooting one time with a have something to do with it. Live and learn.” guy who was SO proud of his custom 1911. Of A good craftsman doesn’t blame his tools. If course, his “custom gun” came complete with you ever want to be a truly superior shooter, 10-pound trigger pulls, had been fitted with a you’re going to have to pay your dues. There is no full-sized 1911 spur hammer/short old Com- way around this necessity. When you run into mander grip safety combo that ate my hand alive someone who has just flat worked harder than you (and normally I don’t get bitten by a 1911 with on their skill level, enjoy watching those who can the traditional hammer/grip safety), and frequent shoot better than you. I do. Don’t shut yourself off failures to feed. It was just generally a POS. So from the knowledge there are people in the world we’re doing some shooting drills, him with his who are better shooters than you, and the possibil- custom 1911, me with my near-stock Glock 34. ity for self-improvement that can open up. If you And he can’t keep up. But that’s okay, I’m not want to be taken seriously by serious shooters, really trying to beat him, I’m just loping along, don’t say, “Well, you practice,” or try to blame it shooting at my normal level of speed with accu- on the guns. Just say, “Good shooting,” then go racy. He, on the other hand, was trying to beat home, start dry firing and loading practice ammo. me. And even when his gun worked, he couldn’t Duane’s website is Self-Defense-Handguns.com. 63 Practice Can’t Make Perfect if You Don’t Practice

Above: Want to know how various methods of gripping your gun affect how it acts in recoil? Practice. Right: Want to be able to top your gun off with fresh ammo in a timely fashion? Practice. DP

SquareNew Deal B Toolhead StandFrom Super 1050/RL Dillon:1050 Short Trim Die Toolhead

olds your or short rifle cartridges like thick to facilitate the correct HSDB tool- Fthe .300 Blackout, you case length. This specialty head, powder must use a Short Trim Die toolhead enables you to cor- measure, dies Toolhead when using a Dillon rectly trim and prepare short and caliber Rapid Trim 1500 Case Trimmer rifle cases on your 1050. conversion during case preparation. Oth- (NOTE: the 1050 toolhead components erwise, the toolhead is too stand is not included.) (not included) in an orderly manner.

L02-62225 L02-62219 $24.95 $224.95

800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com 64Get your “stuff” together, then keep it that way!

DescriptionDillon Ammunition Stock # Each 10 ea.Boxes Case(qty.) 9mm (50 rd) L02-13784 $1.58 $13.50 $58.00(50) 9mm (100 rd) L02-13645 1.81 15.40 66.00(50) .38/.357 (50 rd) L02-13476 1.79 14.70 63.00(50) .38/.357 (100 rd) L02-13766 2.20 18.80 80.50(50) .44 (50 rd) L02-13568 1.79 15.30 65.50(50) .44 (100 rd) L02-13680 2.92 24.90 106.50(50) .45 ACP (50 rd) L02-13715 1.73 14.70 63.00(50) .45 ACP (100 rd) L02-13574 2.83 24.20 103.50(50) Small Rifle (50 rd) L02-13740 2.05 17.50 75.00(50) Medium Rifle (20 rd) L02-13625 2.05 17.50 120.00(80) Medium Rifle (50 rd) L02-13665 2.90 24.70 106.00(50) Large Rifle (20 rd) L02-13647 2.01 17.20 73.50(50) Large Rifle (50 rd) L02-13231 3.20 27.30 117.00(50) Try a few of Dillon’s heavy-duty, lightweight plastic NOTE: “.38” series cases fit .38 Super, .32-20, .30 Carbine and .30 Mauser; “9mm” series cases fit .30 Luger, 9 x 21 and .380; “.44” series cases fit .41 Mag, .44-40 and .45 ammo boxes. If you’re like us, you’re tired of crumbling Colt; and “.45” series cases fit 10 mm and .40 S&W. “Small rifle” cases fit .222, .223 to 7.62 x 39 length; 20 round “medium rifle” cases fit 7.62 x 39, .22-250 to .30-06 styrofoam and cardboard boxes held together with layers length; 50 round “medium rifle” cases fit .22-250, .308 to .30-30 length; and “large of tape. These boxes are perfect for range or field use. rifle” cases fit .30-06, 8 x 57 length to all belted cartridges. Extra Loading Data Labels, L02-10446, Package of 100, $6.95 Designed to keep out dirt, dust and rain.

kroBins areDillon perfect for reloaders AkroBins who load several calibers, bul- Alet weights, bullet shapes, etc. We’ve been including these bins with our machines for years, and now we’re stocking them in quan- tity for our customers. • The small bins (the ones we use as Square Deal “B” cartridge bins) are 4-3/4" long x 3-7/16" wide x 2-13/16" deep. • The RL 550B/XL650 cartridge bins are 6-3/4" long x 3-7/16" wide x 2-13/16" deep. • The 1050 bins are 10-1/4" long x 4-3/8" wide x 4-3/4" deep. • The double-extra-large bins we use on our SL 900 measure 13- 3/4" long x 6-1/2" wide x 6-3/4" deep (all inside dimensions). AkroBins are made of heavy-duty polypropylene with perma- nent, molded-in color (ours are blue). They’re virtually unbreak- able; unaffected by weak acids and alkalis, and are also water, rust and corrosion proof. Hang ’em, stack ’em, rack ’em and fill ’em – you just can’t beat ’em! Buy several and get your “stuff” together. Description Stock # Each 6 ea. 12 ea. “Square Deal” Bin L02-13756 $2.95 $15.30 $24.84 “RL 550/XL 650” Bin L02-13839 2.95 15.30 24.84 “RL 1050” Bin L02-13484 6.95 34.92 61.92 “SL 900” Bin L02-17125 10.50 56.94 106.92

illon’sDillon Utility boxes Utilityare ideal for all thoseBoxes accessories that Ddon’t quite fit into the compartments of your shooting bag. The large box measures 13-1/2" x 5-3/4" x 2-1/4" and the small box measures 4-5/8" x 6-3/8" x 1-5/8". Use them for cleaning gear, extra magazines, repair parts, first aid supplies, reloading accessories and tools – the list is endless. Description Stock # Each 5 ea. Small Utility Box L02-13636 $2.65 $10.95 Large Utility Box L02-17195 5.75 23.95 Berry’s Manufacturing Ammo/Storage Boxes Description Stock # Each 10 ea. 50 ea. .500 S&W (50 rd) L02-19243 $2.98 $22.40 $97.00 Note: .500 S&W Ammo Boxes also fit .223/.243/.308 WSSM Cartridges .454 Casull (50 rd) L02-19244 2.98 22.40 97.00 .45/70 (50 rd) L02-19245 3.29 24.20 105.00 7.62 x 54R (50 rd) L02-19247 3.50 25.50 110.50 .300 Ultra (50 rd) L02-19246 3.50 25.50 110.50 20 Ga. (25 rd) L02-19248 2.24 16.80 72.50 12 Ga. (25 rd) L02-19249 2.24 16.80 72.50 Storage Boxes 4-3/8”x 2”x 1-5/8” L02-19250 $1.12 $8.40 $36.50 4-1/2”x 4-1/2”x 1-5/8” L02-19251 2.32 17.40 75.50 5-1/2”x 2-5/8”x 2-1/2” L02-19252 2.22 16.70 72.00 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com 65 Gun-tips® Bore-Whips™ Gun-tips®

ore-Whips™ .17 and .22 caliber (pic- un-tips® Extended Reach Firearm Btured) by Swab-its® are ideal for air GCleaning swabs by Swab-its® revolu- rifles, rimfires or any other .17 or .22 cal- tionize the way you clean your gun. The iber firearm that’s difficult to clean from foam tips are lint free, reusable and ideal for the breach. The foam tips are reusable and cleaning trigger assemblies, slide rails, the handle functions as an empty chamber springs, extractors and anywhere else space indicator. un-tips® foam swabs are reusable and is tight. 24 per package. .17 Cal. L02-12689 $9.99 Greplace cotton swabs. 9-pack L02-12583 $9.99 .22 Cal. L02-12690 9.99 L02-15316 $4.99 Berry’s Bullets Special Purchase

UFF QuickStrips are available for an Tincredible variety of revolver calibers from .17 HM2 to .500 Linebaugh! .22 LR-Magnum/.17HM2-HMR (10 rd.) L02-11737 .32/.327/9mm (8 rd.) L02-11738 he Secure-Mat features a magnetic cor- .38/.357/.40/10mm (5 rd.) L02-11740 Tner that keeps small parts in place when .38/.357/.40/10mm (6 rd.) L02-11741 you field strip your firearm for cleaning. Its .38/.357/.40/10mm (8 rd.) L02-11742 soft, non-slip neoprene construction pro- .41Mag./.45 ACP (6 rd.) L02-11748 tects both your firearm and the work sur- .44 Sp.-Mag./.45 Colt/.460 S&W/ face. It’s ideal for when you’re shooting an .410 Shotshell (6 rd.) L02-11750 .452 Dia. 230 Gr. Hybrid Hollow Point out-of-town match and have to clean your .45 Auto Rim (6 rd.) L02-11751 pistol in a motel room! .475/.480/.500 S&W (5 rd.) L02-11755 L02-19685 $67.50/500 ea. L02-19398 $27.50 Hubbard RU LO IBER PTIC IGHTS T G F $ 95 O S $ 95 Product 99 49 Development Firearms Lubricant RUGLO’s Tritium/Fiber Optic T.F.0. TBRITE•SITE Handgun Sights use a combi- RUGLO’s Fiber Optic BRITE•SITE Hand- L02-15445 nation of Tritium and Fiber Optic technologies. Tgun Sights use traditional Fiber Optic Most Kimber Models L02-18656 technology. Smith & Wesson M&P L02-18627 Springfield XD L02-11603 $7.99 Once-Fired Cartridge Cases he Kershaw Nerve has 3-D machined G-10 scales Tthat provide a great grip without roughing up your Note: Availability Varies, Please Call First pocket. Jimping on the back of the handle and in the index-finger contour further enhances grip. It’s made of 9mm cases 1000/box L02-21694 $69.95 8CR13MoV stainless steel with CNC-machined G-10 .40 S&W cases 1000/box L02-19204 69.95 .45 ACP cases 1000/box L02-30196 79.95 scales, a liner lock, and a 3-1/8” blade. .223 cases 1000/box L02-10485 89.95 L02-15391 $19.95 66 KEEPYOURGUNS! (Clean) J. Dewey Mfg. Co. ExtremeMIL-COMM Performance Lubricants Cleaning Patches Product is color-coded by Packages of 1000 caliber. White shown here .17 cal. (3/4” Sq.) L02-11807 $12.95 for clarity only. .22-.24 (1-3/8” Sq.) L02-11808 14.95 Packages of 500 ore Snake, the “World’s Fastest Gun .24-.27 (1-3/4” Sq.) L02-11809 $11.95 ™ BBore Cleaner” from Michaels of .30-.35 (2” Sq.) L02-11810 13.95 Oregon is a better way to clean hand- Packages of 250 guns, rifles and shotguns. Originally sold .38-.45 (2-3/4” Sq.) L02-11811 $11.95 as a field tool, this product is popular 12-16 ga. (3” Sq.) L02-11812 13.95 with gunsmiths and benchrest shooters as well. Try one and you’ll be hooked! .22 cal. Pistol L02-10426 $22.95 E-Z Brite .357/.38/9mm L02-10427 22.95 .40 cal. Pistol L02-10428 22.95 W-25B is the choice of leading Wonder Cloth .44/.45 cal. Pistol L02-10429 22.95 Tfirearms manufacturers, armorers, pro .22 cal. Rifle L02-10420 22.95 shooters and gun enthusiasts, and is rec- n gun dealers .243 cal. Rifle L02-10421 22.95 ognized as the world’s best all-purpose Oshelves since .270/7mm Rifle L02-10422 22.95 weapons lubricant/protectant. It is now 1976, this product is .30 cal. Rifle L02-10423 22.95 widely specified by the U.S. military for still a must for keep- .357/.375 cal. Rifle L02-10424 22.95 ing stainless steel .410/.458 L02-10425 22.95 their most critical performance weapons systems. Environmentally safe, non-car- and nickel-finished revolvers look- .50/.54/28 Ga. L02-10432 22.95 ing like new. Demand the original 20 Ga. Shotgun L02-10431 23.95 cinogenic, non-ozone-depleting. lead and carbon wipe! 12 Ga. Shotgun L02-10430 23.95 0.5 Oz. Syringe L02-15732 $10.99 37/40mm Launcher L02-15465 46.95 1.5 Ounces L02-15731 14.50 E-Z Brite Cloth L02-18613 $6.99

nake Oil is a deriva- PRO7™ Gun Clean- weet’s Australian Stive of an FDA certi- M-er is odorless, non- S7.62 Solvent eas- fied medical lubricant toxic and biodegradable. ily removes powder used in high-speed med- “Safely cleans rifles, hand- residue and stub- ical drills. guns, shotguns…, black born copper •Provides a film that powder, corrosive priming fouling. It’s separates and protects deposits and much more.” harmless to moving parts, for 4 oz. L02-10139 $11.95 steel, a non- smoother operation and 8 oz. L02-10138 18.95 acid formula increased efficiency. 32 oz. L02-11298 40.95 with five percent •Contains no evaporants M-PRO7™ Copper ammonia. If you and has a film affinity in Remover works up to four shoot a rifle, you excess of two years. times faster than ammo- ought to try •Reduces the collection nia-based cleaners and is cleaning it with of dirt, dust and other odor free. Sweet’s. contaminants. 4 oz. L02-19370 $11.95 L02-13128 •Performance in extreme conditions M-PRO7™ Synthetic $12.95 is unparalleled. Grease is specifically for- 0.5 oz. Bottle L02-16035 $4.95 mulated to adhere, protect, and 2 oz. Bottle L02-16508 8.95 lubricate metal-on-metal sliding sur- Grease, (2) 4cc Tubes L02-17073 4.95 faces. 0.5 oz. Oil, 4cc Grease L02-10059 5.95 4 oz. L02-16180 $14.95

rogLube is a bio-based Fcleaner, lubricant and preservative (CLP) product. FrogLube Solvents are designed to quickly attack surface fouling, baked-on or filmed residues and other metallic fouling rian Enos’ Far Superior Slide-Glide is a such as lead and copper, Bdual grease blend, with proprietary while protecting firearms extreme pressure compounds, which boost coatings, paints, wood the ability of the oils in the grease to with- and other materials from stand extreme pressures. It gives the grease a the corrosive effects of very stringy, tenacious character that makes petroleum-based, flam- it stay where you put it. icrolon UltraBlue protects, penetrates mable and toxic weapons Slide-Glide Standard is for use in warm Mand lubricates all surfaces. UltraBlue is care products. weather (F60º+), Lite is a thinner viscosity in use by the US Army Marksmanship Train- 4 Oz. Paste for lower temperatures (F30º+). ing Unit, the US Army Pistol and Rifle Teams L02-15443 $10.99 Slide-Glide Standard L02-15571 $7.95 and the US Marine Corps Pistol and Rifle 4 Oz. Liquid Slide-Glide Lite L02-15572 7.95 Teams. L02-75125 $9.95 L02-15444 $17.59 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com J. Dewey Manufacturing Company67 .243 Caliber Rifle L02-16280 L02-22091 .270 Caliber Rifle L02-16274 L02-22085 .30 Caliber–7.62mm Rifle L02-16273 L02-22084 .35 Caliber Rifle L02-16281 L02-22092 .44–.45 Caliber Rifle L02-16279 L02-22090 .22 Caliber Pistol L02-16282 L02-22093 .38 Caliber –9mm Pistol L02-16275 L02-22086 .40–.41 Caliber –10mm Pistol L02-16276 L02-22087 .44–.45 Caliber Pistol L02-16277 L02-22088 Cotton Mops .22–.27 Caliber (ea.) L02-17089 $1.60 .30–.38 Caliber (ea.) L02-17090 1.60 .400–.450 Caliber (ea.) L02-17091 1.60 16, 12 & 10 Ga. Shotgun (ea.) L02-17094 1.60 M-16/AR-15 Breech Rod Guide/Chamber Brush Breech Rod Guide L02-10149 $20.00 DEWEY Nylon Coated Cleaning Rods AR-15 Chamber Cleaning Brush L02-11299 2.95 All Caliber Pistol 6" L02-15461 $19.95 Deluxe M-16/AR-15 Lug Recess Cleaning Kit (.22-.26 Jag Adapter for All Caliber 6" rod) L02-19894 3.25 Lug Recess Cleaning Kit L02-18533 $27.95 (.27 & up Adapter for All Caliber 6" rod) L02-19895 3.25 Includes: Chamber Cleaning Rod, Lug Recess Cleaning .22-.26 Caliber Pistol 12" L02-12985 23.95 Head, Delrin Guide Sleeve, 50-pak Cotton Cleaning .17 Caliber Rifle 26” L02-11472 22.95 Rolls, Chamber Brush, Chamber Mop, Double-Ended .17 Caliber Rifle 36” L02-11473 25.95 Nylon Cleaning Brush. .22-.26 Caliber Rifle 36" L02-13084 26.95 Bolt Action Rifle Cleaning Rod Guides .22-.26 Caliber Rifle 44" L02-15462 25.95 All models fit .695-.700 bolt diameter rifles. .27 Caliber and up Pistol 12" L02-13021 23.95 .17-.222, .225, .22/250, .220 Swift L02-14196 $18.95 .27 Caliber and up Rifle 36" L02-12991 24.95 .243 Caliber – 7mm L02-14197 18.95 .27 Caliber and up Rifle 44" L02-15463 25.95 .30 Caliber L02-14198 18.95 .35 Caliber and up Rifle 36" L02-17096 29.95 .338 Caliber L02-14199 18.95 .35 Caliber and up Rifle 44" L02-17097 29.95 Muzzle Guards Shotgun Rod (Uncoated Brass) L02-10473 24.95 AR-15/M-16 L02-16875 $10.95 2-pc Shotgun Rod L02-15464 29.95 M1-A/M-14 L02-16876 10.95 Brass Jags (Note: These jags ONLy fit Dewey Cleaning Rods!) M1 Garand L02-16878 10.95 .22 Caliber Brass Jag L02-10026 $2.75 Ruger 10-22 Standard Bbl. L02-16877 10.95 .24 Caliber Brass Jag L02-10027 2.75 Ruger 10-22 Bull Barrel L02-16879 10.95 .27 Caliber Brass Jag L02-10025 2.75 Ruger Mini-14 L02-16880 10.95 .30 Caliber (and up) Brass Jag L02-10867 2.75 Brass Muzzle Guard, .30 Cal. L02-17245 10.95 .38 – .41 Cal. Brass Jag L02-10028 2.75 Nylon Gun Parts Cleaning Brush .44 – .45 Cal. Brass Jag L02-10243 2.75 Parts cleaning brush L02-16389 $2.25 Brass Patch Loop Accepts most pistol and rifle patches L02-10737 $2.25 ewey’s AR-Link Cleaning Pin .17 Caliber Bore Brushes Dutilizes the rear take-down .17 Caliber Rifle/Nylon (ea.) L02-11475 $1.95 pin in your AR-15 style rifle to .17 Caliber Rifle/Bronze (ea.) L02-11474 1.95 hold the upper and lower receivers Nylon Bore Brushes .22 Caliber Rifle (ea.) L02-16144 $1.30 open for cleaning. It fits AR-15s .243 Caliber Rifle (ea.) L02-16145 1.30 and AR-10s with take-down pins .270 Caliber Rifle (ea.) L02-16146 1.30 up to .316” in diameter. To use, 1) .30 Caliber Rifle (ea.) L02-16147 1.30 Depress the rear take-down pin and pull out. 2) Pivot the upper .22 Caliber Pistol (ea.) L02-16302 1.30 and lower receivers apart. 3) Insert the pin on the AR-Link into the .38 Caliber Pistol (ea.) L02-16148 1.30 upper receiver take-down pin tab. 4) Close receivers with the AR- .40 Caliber Pistol (ea.) L02-16149 1.30 .45 Caliber Pistol (ea.) L02-16150 1.30 Link inserted into the lower receiver. 5) Push the take-down pin Bronze Bore Brushes Each/$1.50 5 pack/$5.50 through the channel in the AR-Link to lock the upper and lower .22 Caliber Rifle L02-16278 L02-22089 receivers into place. 6) Clean your rifle. 7) To remove AR-Link, .25 Caliber Rifle L02-16293 L02-22094 reverse the above steps. L02-18599 $14.95 Bore-tips® Bore Cleaning Foam Swabs drymate ™

o s#!+, there I was…in my ofﬁce, cation of solvents and oils. They work Ncleaning my 686 SSR when the with all standard 8-32 thread cleaning boss walks in with that “whisky-tango- rods, and are tough and reuseable. foxtrot” look on his face. “Hi,” I said .22/5.56mm (6 ea.) L02-15310 $4.98 (thinking fast), “I’m trying out these .243/6mm (6 ea.) L02-15311 4.98 Bore-tips before I write the Blue Press .30/7.62mm (6 ea.) L02-15312 4.98 he drymate™ Gun Cleaning Pad protects copy for them. They work GREAT!” .357/9mm (6 ea.) L02-15313 4.98 Tyour table and firearms from scratches The Bore-tips Swabs REALLY DO .40/10mm (5 ea.) L02-15314 4.98 and spilled cleaning fluids. Machine wash- work. What you can’t see under the .45 Caliber (5 ea.) L02-15315 4.98 able, durable, stain resistant and long lasting. foam is a plastic jag sized for a tight bore 12 Gauge (3 ea.) L02-15325 8.98 Gun Cleaning Pad™ L02-11313 $19.95 ﬁt which provides for the uniform appli- 20 Gauge (3 ea.) L02-15326 8.98 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 68 WilsonWilson CombatCombat

A. B. C. D. E. F.

G. I.

ilson Combat’s NEW Elite Tactical Magazine HD +P – “The D. Match Magazine (7 rd) .45ACP L02-10505 $32.95 WETM Heavy Duty/+P rated.45 ACP magazines with exclusive E. WIL-ROG Mag (8 rd) .45ACP L02-11714 32.95 stainless flatwire MAX magazine spring and time-tested ETM tube.” F. Officers Match Mag. (7 rd) .45ACP L02-10506 32.95 A. (8 rd) .45ACP L02-18602 $44.95 SHOk-BUFF® Recoil System – Includes a One Piece Guide Rod and Elite Tactical Magazine – “The ETM started with a blank sheet of Plug; six SHOK-BUFF buffers; an Extra Power Firing Pin Spring; an paper and 30-plus years of 1911 and 1911-magazine experience; Extra Power Recoil Spring; and a Reduced Power Recoil Spring. designed from the ground up as a premium tactical magazine.” G. SHOK-BUFF System L02-18150 $37.05 B. ETM (8 rd) .45ACP L02-12027 $34.95 Wilson SHOk-BUFF® – A 1/10” thick poly fiber buffer between the C. ETM (10 rd) 9mm L02-19463 $34.95 frame and slide contact areas. Wilson Combat Magazines – “No other .45 magazine on the market H. SHOK-BUFF Kit (2 buffers, 18.5# recoil spring) Gov’t Model can compare for proven inherent reliability, durability and the ability L02-18148 $5.95 to remain fully loaded for long periods of time without damage.” I. SHOK-BUFF Buffer only (6 ea.) L02-18147 $6.95 WOLFF GUNSPRINGS Cz 75B 16 Pound L02-19343 7.98 Wolff RECOIL SPRINgS 9 Pound L02-19348 $7.98 17 Pound (Standard) L02-19344 7.98 BROWNINg HI-POWER 10 Pound L02-19349 7.98 SPRINgFIELD 5” 45 xD 18.5 Pound L02-11373 $7.25 11 Pound L02-19350 7.98 14 Pound L02-19345 $7.98 COLT gOvERNMENT MODEL 12 Pound L02-19351 7.98 16 Pound L02-19346 7.98 9 Pound L02-11719 $7.25 13 Pound L02-19352 7.98 18 Pound L02-19347 7.98 10 Pound L02-12193 7.25 14 Pound (Standard) L02-19353 7.98 SPRINgFIELD 4.5” 9/40 xDM 12 Pound L02-12007 7.25 SMITH & WESSON M&P 14 Pound L02-19336 $7.98 13 Pound L02-12443 7.25 12 Pound L02-19356 $7.98 16 Pound L02-19337 7.98 14 Pound L02-12338 7.25 14 Pound L02-19357 7.98 18 Pound (Standard) L02-19338 7.98 16 Pound (Standard) L02-11860 7.25 15 Pound L02-19358 7.98 Wolff gUIDE RODS 17 Pound L02-12192 7.25 16 Pound (Standard) L02-19359 7.98 Smith & Wesson M&P L02-19354 $24.95 18.5 Pound L02-12465 7.25 SPRINgFIELD 5” 9/40 xD Springfield XDM 4.5 L02-19355 24.95 20 Pound L02-12056 7.25 12 Pound L02-19339 $7.98 Wolff HAMMER SPRINgS 23 Pound L02-11377 7.25 13 Pound L02-19340 7.98 1911 L02-11511 $9.00 COLT OFFICERS MODEL 14 Pound L02-19341 7.98 Wolff MAg CATCH SPRINgS 24 Pound L02-12110 $7.25 15 Pound L02-19342 7.98 1911 L02-11791 $9.95 SPRINGFIELD Magazines Chip McCormick Corp’s

Springfield Factory xD & xDM Magazines “Shooting Star” 16-Rd. xD 9mm L02-11586 $31.95 12-Rd. xD .40 L02-11587 31.95 Magazines 13-Rd. xD/xDM .45 Designed to give the serious pis- L02-11585 32.95 tol shooter the advantage of extra 19-Rd. xDM 9mm L02-15496 36.95 shot capacity and improved per- 7-Rd. xD-S 9mm L02-19681 28.95 formance. Floorplate drilled to 9-Rd. xD-S 9mm L02-19680 39.95 accept base pads. 16-Rd. xDM .40 L02-19971 36.95 .45 ACP SS Mag., 8-Rd. 5-Rd. xD-S .45 L02-15234 28.95 L02-10311 $22.95 7-Rd. xD-S .45 L02-15235 39.95 .45 ACP SS Mag., 10-Rd. Two-Piece 1911 Recoil Spring guide Rod – L02-15025 $25.95 Machined from stainless steel, includes plug and Allen wrench. L02-15724 $24.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com CHECK-MATE 1911 Magazines69

.45 8-Rd. w/2 pads L02-27047 $24.95 Base Pad 9mm 9-Rd. .38 Super 10-Rd. .40 S&W 9-Rd. 10mm 9-Rd. .45 8-Rd. Comp. w/Screws .45 10-Rd. L02-27043 L02-27044 L02-27046 L02-27045 L02-27049 L02-18045 L02-27039 $24.95 $24.95 $24.95 $24.95 $24.95 $2.50 $31.95 Evolution Gun Works hese two-piece flat checkered main- Tspring housings with bolt-on mag wells are similar to the patented one- piece S&A design. The mag well and checkered mainspring housing are machined from solid bar stock steel and can be used without the mag well attached, although there will be a small alifornia Competition Works’ Magazine Storage Sleeves make dovetail below (this does not impair Cit easy to organize your pistol magazines. The optional I.D. function). This is a great replacement for Tag/Hanger makes it less likely that you’ll show up at a match with plastic mainspring housings on full-size the WRONG magazines! or commander model 1911s. Four-Magazine Storage Sleeve L02-19226 $14.95 Stainless L02-18600 $49.99 Six-Magazine Storage Sleeve L02-19227 17.95 Blued L02-18601 49.99 Magazine Sleeve I.D. Tag/Hanger L02-19476 1.95 Adjustable Target Sight for 1911s

his Adjustable Target Pistol Sight is precision machined and fits ecure Firearms Products’ Universal Spring Tester will help Tin a standard “Bomar slide cut.” Yeah, the services of a gun- Syou determine if the recoil spring in your pistol needs smith are required to cut the slide (unless your 1911 pistol already replacing, and you’ll save time and money by testing and has a Bomar cut) but the results are worth it. organizing loose recoil springs in your shooting bag. Adjustable Pistol Sight L02-18210 $53.95 Recoil Spring Tester L02-15305 $39.95

AGPUL 1911 Grip MPanels feature reinforced polymer construction and a unique diamond-shaped cross sec- tion to prevent twisting in the hand. They also have an aggressive mag-release cut out and are compatible with ambidextrous safeties. FDE L02-43237 $19.95 BLK L02-43236 19.95 ODG L02-43238 19.95

Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 70 CHECK-MATE M14/M1A Magazines urrently Check-Mate Industries is the largest CM14/M1A magazine manufacturer for the United States Military. Check-Mate Industries is rec- ognized as being America’s number one manufacturer of M14 magazines. We offer CMI M14/M1A magazines in 5-, 20- and 25-round capacity. 5-round M14, Phosphate Finish L02-27055 $22.00 20-round M14, Polished-Stainless Finish L02-27056 $28.00 20-round M14, Phosphate Finish (NSN#: 1005- 00-628-9048 Gov’t: 7790183) L02-27057 $27.00 25-round M14, Phosphate Finish (The same Mil- Spec magazines Check-Mate is now supplying to the US Military.) L02-27048 $35.95 Mec-Gar ProMag Pistol Magazines Beretta 92 18-rd. AFC* L02-18728 $25.95 Beretta 92 20-rd. AFC* L02-18729 29.95 Beretta 96 .40 15-rd. AFC* L02-14992 29.95 Browning HP 15-rd. Blue L02-18730 25.95 Browning HP 20-rd. Blue L02-18731 29.95 1911 11-rd. Blue L02-18732 24.95 Para P-14 14-rd. Blue L02-18733 23.95 Para P-16 15-rd. Blue L02-18734 23.95 Para P-18 17-rd. Blue L02-18735 23.95 Ruger P-Series 9mm 17-rd. Blue L02-18736 25.95 Ruger P-Series 9mm 20-rd. Blue L02-18737 29.95 S&W 59 17-rd. Blue L02-18738 25.95 S&W 59 20-rd. Blue L02-18739 29.95 SIG Sauer 226 18-rd. AFC* L02-18740 25.95 hese magazines are American made and feature a life- SIG Sauer 226 .40 15-rd. AFC* L02-15020 29.95 time manufacturers-defect warranty from ProMag. SIG Sauer 228 15-rd. Blue L02-18741 25.95 T Springfield XD (not XDM) 9mm 18-rd. L02-14988 23.99 Polymer 32-rd. 9mm AR-15 L02-12638 $19.95 Springfield XD (not XDM) .40 13-rd. AFC* L02-14991 29.95 Polymer 30-rd. Mini-14 L02-12631 19.95 Taurus 92-99 17-rd. Blue L02-18742 25.95 Polymer 30-rd. AK-47 (7.62) L02-12669 17.95 Taurus 92-99 20-rd. Blue L02-18743 29.95 Polymer 30-rd. AK (.223) L02-12674 17.95 CZ-75B 19-rd. AFC* L02-14989 29.95 Polymer 30-rd. AK-74 (5.45) L02-12675 17.95 *AFC = Anti-Friction Coating Kel-Tec P-32 Pistol (.32 ACP) L02-12620 19.95

-Products 30-Round alu- ew steel 20-round AK-47 uger’s BX-25 magazine for Cminum M-16/AR-15 maga- Nmagazine from South ew steel 30-round AK-47 Rthe 10-22. zine. Korea. Nmagazine from Bulgaria. L02-17915 $29.95 L02-15593 $19.95 L02-11074 $14.95 L02-12022 $24.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com ElZetta 71 Tactical Flashlight Mounts ZFH1500 Flashlight very Elzetta ZFH1500 Flashlight Mount for AR15 rifles Eand ZSM Tactical Shotgun Flashlight Mount comes with Mount for AR15s sizing adapters, giving the mount the ability to accommodate flashlights from 0.7 to 1.05 inches (18 to 27 mm) in diameter. This includes flashlights from popular manufacturers such as InForce®, Streamlight®, Pelican®, Laser De- vices®, SureFire® and of course, the Elzetta® ZFL-M60. (Sizing Adapters are not required when using an Elzetta ZFL-M60 or other 1-inch lights.) The Elzetta ZSM is made from the same advanced glass-filled polymer that has proven itself in the popular Elzetta ZFH1500. The NEW Elzetta ZRX Tactical Flashlight Mount is made for flashlights with standard one-inch bodies and will accommodate a range from 0.94 to 1.04 inches (23.8 ZSM Tactical Shotgun to 26.4 mm). This includes many popular tactical flash- Flashlight Mount lights including the Elzetta ZFL-M60. The Elzetta ZRX clamping rings are made from Mil-Spec Type III Hard An- odized aluminum, the body is a glass-reinforced polymer and the hardware is steel. The ZRX weighs 1.1oz (32g). ZFH1500 AR15 Flashlight Mount L02-12020 $29.95 ZRX Tactical ZSM Tactical Shotgun Mount L02-18050 39.95 ZRX Tactical Flashlight Mount L02-15487 35.00 Flashlight Mount A.

PROTEKTORThe Original Leather Sandbag* MODEL Rifle Rests ll Protektor Model leather bags are Amade with the best top grain cowhide available. The welded steel rest is strong enough to stand on and won’t break if dropped (Owl Ear Front Bag sold separately). A. Front Bag L02-10880 $19.95 B. B. Rifle Rest L02-10883 49.95 C. Std. Front Bag L02-10881 22.95 C. D. Rear Bag L02-10882 26.95 D. *Sand not included. The Dillon Shooting Mat ARGET TSPORTS® TACTICAL

illon’s shooting mat is made of tough ballistic-weave Dnylon fabric, with a large skid-resistant elbow pad his three-piece shooting bag set is an incredible value area. The “ground” side is moisture resistant and wipes Tfor the money! The bags are made of durable, water- clean easily. The padding is dense, closed-cell foam to resistant 600 denier polyester and provide a steady and provide both shooter comfort and a stable shooting solid shooting system for long guns and handguns. I base. The mat is equipped with a shoulder strap, a filled the ones in the photo with walnut tumbling media carry handle and two straps with snap-release buck- and found them to be easy to fill and much lighter to les. Dimensions: 66” x 27.75” carry than when filled with sand. L02-18146 $65.00 L02-15384 $29.95 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 72 TARAN TACTICAL INNOVATIONS MAGPUL MAGLINK™

L02-43240 he TTI Magazine Extension for MagPul AR-15 5.56 PMAGs is $17.95 constructed of machined aluminum. T L02-15770 $39.99 MAGPUL QD SLING SWIVEL

he TTI Benelli Extended AccuGuide Carrier is the ﬁrst extended Tcarrier ever manufactured from one solid piece of SAE 304 Stainless Steel, which eliminates the need for welding. It is heat- treated and polished, providing optimal performance. The Carrier features an extended guided rail on each side to assist in centering the round while reloading. It will provide you the speed and com- L02-43239 fort of not having your thumb torn up after reloading. Compatible with: Benelli M1/M2/M3/SBE, Versamax. L02-15769 $79.99 $14.95 TACCOM, LLC Mag Extensions

A. B.

ACCOM Five-Round Magazine Extensions for MagPul Gen 3 TPMAG 40-round 5.56 magazines and current M3 Generation (20- and 25-round) 7.62 PMAGS are designed to fit and function without modification. Previous-generation 20-round 7.62 maga- agna-Matic’s Carbon Removal Tools quickly remove carbon zines can be modified to work with the extension. The 5.56 exten- Mfrom your rifle with ease and precision. sion will also work with PMAG 30-, 20-, and 10-round magazines, CRT-15 (AR15/M16) L02-11705 $49.95 but will not lock in place (instructions for use included). CRT-25 (AR10/SR25) L02-29025 49.95 A. 5-Round 7.62 Extension L02-19542 $24.95 CRT-14 (M1A/M14) L02-29823 41.99 B. 5-Round 5.56 Extension L02-19541 18.95 M-16/AR-15 BUTTSTOCK CLEANING KIT Adjustable M1/M1A Gas Systems ll Schuster Mfg. Inc. adjustable gas plugs are made in the U.S.A. uffer Technologies’ Recoil Buffer™ re- A Bduces felt recoil and increases muzzle from hardened tool steel, Parkerized control. Easy installation. n “MIL-SPEC Speak,” this is a KIT, and feature a lifetime factory warranty. Beretta 92 L02-18539 $24.95 ICLEANING, BUTT STOCK M16A2 RIFLE, By adjusting the volume of gas, you (Includes buffer and guide rod.) which contains: ROD, CLEANING, SMALL change the speed of the op rod and Browning HP L02-18540 9.95 CETME L02-18541 19.95 ARMS: M11E3; CASE, SMALL ARMS ACCES- the barrel harmonics. If you’re work- CZ 75 L02-18542 9.95 SORIES; BRUSH, CLEANINGSMALLARMS; ing up your own handloads, a quarter of a turn WILL affect your group size. FN FAL L02-18543 14.95 BRUSH, CLEANINGSMALLARMS: BORE; GLOCK (pictured) L02-18545 9.95 BRUSH, CLEANINGSMALLARMS: CHAMBER; Includes instructions and the adjust- HK 91 L02-18544 19.95 AND BOTTLE ASSEMBLY LSA 5 OZ. It just ment tool (Allen wrench). Ruger 10/22 L02-10526 9.95 doesn’t get much more MIL-SPEC M1A (Pictured) L02-15405 $59.00 Ruger Mini-14 L02-10525 14.95 than that. SOCOM M1A L02-15409 59.00 SIG 220/226 L02-19123 24.95 L02-15383 $14.99 M1 Garand L02-15408 40.00 S&W Model 41 L02-18486 9.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com ® 73™

MAGPULEnhancedUNFAIR Enhanced ADVANTAGE Trigger “Battery Assist Self-Leveling Guard, Aluminum Device” for AR-15/M16 AR-15/M16 AR-15/M16 Mag Follower

he MagPul® Enhanced Trig- eveloped from the experi- Tger Guard™ is a black Dence of the MagPul® anodized aluminum drop-in Team, the B.A.D. Lever™ is replacement for the AR15/M16 designed to improve the speed weapons platform. It features a and efficiency of the AR-15/M- AGPUL’s Enhanced Self Lev- shallow "V" shape for better use 16 by enabling the shooter to Meling Follower is a drop-in of gloves in tactical shooting or manipulate the bolt catch with- AGPUL 30-Round polymer replacement for USGI 30-round cold weather operations. It’s non- out moving away from the MPMAG GEN M2 M-16/AR- magazines. Features a four-way folding and has rounded edges. ready position. 15 magazines. anti-tilt design. Aluminum Trigger Guard MagPul B.A.D. Lever L02-12644 $14.95 3-Pk. L02-12606 $6.95 L02-12611 $19.95 L02-27058 $29.95 GRSC CQB Slings, Sling Mounts and Front Swivels

A. B. C. D. he GSRC CQB Sling was designed as a mission-specific sling for CAR-15 Ambidextrous CQB Sling Mount without slots (pictured TCQB operations. It attaches only at the rear of the firearm and al- mounted on rifle above) L02-19170 $14.95 lows the operator to quickly transition to a handgun if necessary. C. A2-Style AR-15 CQB Right-Hand-Only Sling Mount A. CQB Sling With Quick-Release Hook L02-19172 $39.95 L02-19168 $34.95 CQB Sling Without Hook (not pictured) L02-19173 $24.95 D. Remington 870 Shotgun Ambidextrous CQB Sling Mount B. CAR-15 Ambidextrous CQB Sling Mount with slots L02-19169 $24.95 L02-18968 $14.95 Viking Tactics V-TAC MK1 Sling iking Tactics’ V-TAC MK1 Sling is quick, instantly Vadjustable to improve your shooting position, allows shooting from weak-side shoulder, secures the carbine during handgun transitions, and allows hands-free movement in difficult surroundings. Viking Tactics Sling for CAR-15 L02-11961 $34.95 Viking Tactics Sling for FN-FAL/HK-91 L02-11962 40.00 M-14 Bolt Roller Greaser AR-15 Charging Handle

ewey’s AR-Link Cleaning Pin utilizes Dthe rear take-down pin in your AR-15 style rifle to hold the upper and lower receivers open for cleaning. It fits AR-15s o THAT’s how you grease that little and AR-10s with take-down pins up to S.O.B. (Slick-Operating Bolt, that is.) .316” in diameter. S M-14/M1A Bolt Roller Greaser L02-18599 $14.95 L02-18531 $6.75 L02-19550 $19.99 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 74J. Dewey Manufacturing Company AR Gas Tubes

J. Dewey AR Gas Tube, Short L02-15795 $9.95 AR Gas Tube, Mid-Length L02-15796 11.95 J. Dewey AR Gas Tube, Long L02-15800 9.95 ODIN Works XMR Emergency AR(epair) Kit Crucial Parts for Your AR-15 EXTENDED MAGAzINE RELEASE FOR AR-15S Tac Latch DIN Works EXTENDED MAG- OAZINE RELEASE allows you to rapidly change mags without disrupt- ing your shooting position. The XMR features an ergonomic design that is four times larger than factory magazine buttons and is con- toured for positive depression and reduced slip. Anodized in your choice of matte black he Specialized Dynamics AR-15 Emer- he Badger Ordnance Tac Latch makes it (pictured), ODIN green, red or tan. Tgency Repair Kit includes: three gas Tmuch easier for you to operate the latch Black XMR L02-11996 $19.95 rings, extractor spring, firing pin retaining on your AR-15/AR-10 charging handle. It Green XMR L02-11998 19.95 pin, buffer retaining pin/spring, hammer/ works especially well for “flat-top” rifles Red XMR L02-11997 19.95 trigger pin, take down detent and spring. equipped with low-mounted optics. Tan XMR L02-11999 20.95 L02-19460 $19.95 L02-10379 $18.95 Jerry Miculek AR-15 Compensator TTacticalRUG SightsLO A. AR15 B. C. Tritium/Fiber Optic -Accessories’ AR-15/M-16 Brass De- TCflectors are CMP/NRA approved for Front Sight service-rifle competition. Now you can pile erry Miculek’s three-chamber AR-15 your spent brass at your feet instead of wast- JCompensator fits threaded-barrel rifles ing time hunting it down. and may be “clocked” for left- or right- L02-18626 $69.95 A. Standard AR-15 L02-12541 $19.95 handed shooters. Used by many top three- B. Flat-top L02-12542 19.95 gun competitors. C. Removable Carry Handle L02-11328 $49.95 L02-12543 19.95 KNS Precision, Inc. AccuWedge AR-15 he AccuWedge fits between Tthe upper and lower re- Extractor Upgrade ceiver on your AR-15, removing excess movement. AccuWedge L02-19122 $4.95

erma-Pin Firing Pin Retainer for M-16 Pand AR-15 replaces the standard cotter pin found in the bolt carrier to retain the fir- he AR-15 Extractor Upgrade increases ing pin (as in original Stoner rifles). Made of Tthe tension on the extractor, pushing it tool steel. No modification to gun required. deeper into the cartridge extractor groove. L02-19927 $9.00 L02-19121 $12.95 75

JP Enterprises, Inc.JP Adjustable Tactical Performance Gear Gas System JPGS-2FS JP A2 Front Sight w/Gas Valve JP Compensator L02-12591 $129.95 JPTRE-2 1/2” x 28 TPI JPGS-2B w/Quick Custom Stainless Bolt Carrier w/Exit Hole for .223 Detach Rail JPFBC-3 SP Low Mass, JP AR Speed Hammer Matte Black Finish L02-12592 Stainless Finish JPSH-1A Low Mass Hammer L02-12614 $89.95 $89.95 L02-12584 $225.95 L02-12617 $59.95 JP Reduced Power AR Spring Set L02-12618 JP Enhanced $10.95 JP Custom Rifle Operating Spring Reliability, JP Recoil Eliminator Reduced JPS-OSR Rifle JPRE-2 1/2” x 28 TPI JPFC-1 .154 Small Pin Fire Control Power AR L02-12587 $19.95 Kit w/CD-ROM Instructional Video Spring Set Carbine Operating Spring Standard Version for AR15/M16 L02-12616 $119.95 L02-12590 JPS-OSC Carbine Matte Black Finish $10.95 L02-12594 $19.95 L02-12615 $99.95

JP Enterprises (Competition Only) Low Mass Buffer JP Enterprises .223 JP EnhancedBolt™ Assembly JPLMB JPEB-223 SAE3910 Construction L02-12585 $59.95 L02-12586 $124.95 POF-USA AR-15/M-16 Parts Smith Enterprise, Inc. Vortex® Flash Eliminators

Trigger System, Incl. KNS Pins AR-15 Lower Parts Kit L02-19386 $199.99 L02-25364 $65.00

Enhanced Roller Cam Pin Upgrade Finger Placement Includes Gas Key Trigger System, Incl. KNS Pins .308 Vortex Flash Eliminator .223 Vortex Flash Eliminator L02-25363 $45.00 L02-19387 $229.99 L02-19683 $85.00 L02-19682 $65.00 76

C-M OSYSTEMSRE RTS STS

Railway Tactical Sight Colt Scout Sight

C-More Systems RTS Sight features a built in Picatinny/ Polymer 8 MOA Black L02-16511 $259.00 Weaver style rail mount. Aluminum 4 MOA Black L02-14612 309.00 RTS 3.5 MOA, Black L02-14518 $419.00 C-More Systems Tactical Sight features an A-2 Style rear RTS 7 MOA, Black L02-14563 419.00 aperture sight and mounts to flat-top AR-15s C-More Systems STS Sight is the smallest C-More made Aluminum 6 MOA Black L02-11444 $444.00 and many specialized mounting options are available. Polymer 6 MOA Black L02-11605 399.95 STS 3.5 MOA, Black L02-14345 $399.00 C-More Systems Colt Scout Sight STS 7 MOA, Black L02-14346 399.00 Aluminum 4 MOA Black L02-16808 $368.00 STS Mount, Large Glock L02-14367 39.99 Replacement Modules for Railway/Scout/Tactical Sights STS Mount, Small Glock L02-14372 39.99 2 MOA Dot Module, Polymer L02-14620 $49.00 STS Weaver/Picatinny Mount L02-14373 47.99 STS 30mm Scope Tube Mount L02-14379 47.99 2 MOA Dot Module, Aluminum L02-14643 49.00 STS 1” Scope Tube Mount L02-14474 47.99 4 MOA Dot Module, Polymer L02-16415 49.00 CR2032 Lithium STS/RTS Battery L02-14721 5.00 4 MOA Dot Module, Aluminum L02-14691 49.00 C-More Systems Railway Sight 6 MOA Dot Module, Polymer L02-16416 49.00 Polymer 8 MOA Black L02-16413 $249.00 6 MOA Dot Module, Aluminum L02-14696 49.00 Aluminum 8 MOA Black L02-14611 299.00 8 MOA Dot Module, Polymer L02-14717 49.00 C-More Systems Tactical Railway Sight features a built-in 8 MOA Dot Module, Aluminum L02-14720 49.00 spacer to co-witness with sights on flat-top AR-15s Railway/Scout/Tactical Battery L02-17034 4.00 SPECIALIZED DYNAMICS Armorers Upper Receiver Block

he Specialized Dynamics AR15/AR10 Armorers etc. One block ﬁts AR15s and ArmaLite and DPMS plat- TUpper Receiver Block is made from billet aluminum form AR10s. (Sorry, the upper receiver pictured above is and holds your upper receiver securely in order to make NOT included.) it easier to install barrels, free-ﬂoat tubes, muzzle devices, L02-43234 $59.99 TARGET SPORTS® TACTICAL AR-15 Super Tool L02-19549 $24.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com Bushnell Trophy TRS-25 77 Ultra Compact Red Dot Sight

ushnell’s Trophy TRS-25 Ultra Compact Red Dot Sight is designed for Buse on shotguns, handguns and rifles. It is constructed and assembled by highly skilled craftsmen to Bushnell’s high quality standards. The precision and craftsmanship with which this scope was built ensures its performance under demanding conditions. This scope will provide the shooting accuracy and repeatability which have made Bushnell legendary. Features unlimited eye relief and a three-minute of angle dot. TRS-25 L02-11643 $89.95 Scout Scope Mounts for AK, SKS Rifles cout Scope Mounts provide an extremely stable optics base for your AK, Saiga or SKS rifle and will not shift, vibrate loose or Sorry, the optic S change point of impact as the rifle heats up. Rock solid and easy to pictured here is NOT install, the two-piece design enables the removal and replacement included with the of your optics without losing zero. Scout Scope Mount. Scout Scope Mounts easily allow for complete DISASSEMBLY of your rifle for cleaning and maintenance while retaining zero. These rifles are designed so that carbon build-up can easily be cleaned from the gas tube and piston. This is routine maintenance, necessary in order to maintain a properly functioning rifle. Other mounts for AK-and SKS-style rifles make this difficult, time consuming and then require that optics be re-zeroed. Scout Scope Mount for AK Rifle L02-25374 $79.99 Scout Scope Mount for SKS Rifle L02-25373 78.99 Evolution Gun Works Picatinny Rail Scope Mounts $3999

Available in Standard Elevation or Plus-20 Minutes of Angle Remington Model 700 Short Action L02-19975 Savage Long Action RB L02-19981 Remington Model 700 Short Action + 20 MOA L02-19976 Savage Long Action RB + 20 MOA L02-19982 Remington Model 700 Long Action L02-19977 Winchester Model 70 STD L02-19983 Remington Model 700 Long Action + 20 MOA L02-19978 Winchester Model 70 STD + 20 MOA L02-19984 Savage Short Action RB L02-19979 Winchester Model 70 Short Action L02-19985 Savage Short Action RB + 20 MOA L02-19980 Winchester Model 70 Short Action + 20 MOA L02-19986 Tactical Winchester Twist Leg Bi-Pod inchester’s Twist Sports WLeg Bi-Pod is compact, 45°-Offset lightweight, easily at- Auxillary taches to your Optics riﬂe’s sling swivel Mount stud, and twist of the wrist is – quite literally – all it takes to switch from features twist lock legs Ayour long-range optic to a CQB red-dot sight with Tactical for unshakeable prone and Sports’ 45-degree Offset Auxillary Optics Mount! Fits most Picatin- bench shooting. Legs adjust from ny rails. (Pictured with Bushnell’s TRS-25, which is NOT included!) 7.5” to 11.75” height. 45° Offset Optic Mount L02-14472 $14.99 L02-19671 $29.95 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 78 The Gunfighter’s Shrine

By Brian Dervin Dillon and David Erin Dillon instead, accompanied his parents to California in Only a single active cemetery can be found 1864 by wagon train. The Earp family settled in within the city limits of San Francisco, California. San Bernardino County. Teenaged Wyatt found This is the old military graveyard at the Presidio, in work as a teamster all over the West, from Califor- continual use since its founding in the 1770s. Late nia to Wyoming. He gambled a little on the side, 19th century San Francisco, faced with a rapidly and by the time he was 20, was also officiating at expanding population, passed an ordinance rough and tumble boxing matches. Earp was six against burials within feet tall, reserved, its boundaries in and quiet. He was 1902. Subsequently, fearless, determined, all the old cemeteries and a crack shot were moved. Except with pistol, rifle and for the Presidio, all of shotgun. the active burial The Earp brothers grounds now lie to lived and worked in the south of the city some of the rough- and county bound- est Western towns ary. These begin at like Dodge City, Colma, known for Kansas; Deadwood, the past century and Dakota Territory; Las a half by most San Vegas, New Mexico Franciscans either as Territory; and Tomb- the “City of the stone, Arizona Terri- Dead” or the “Cali- tory. Over his long fornia Necropolis.” In life, Wyatt made a one of these cemeter- living on both sides ies lie the mortal of the straight and remains of Wyatt narrow. At various Earp (1848-1929), times he was a buf- perhaps the most falo hunter, a miner, famous and certainly a prospector, a the most controver- stagecoach shotgun sial of all American guard, a policeman, lawmen. a deputy Marshal, Throughout and a deputy sheriff. human history shrines Figure 1: Wyatt Earp as Lawman, commemorated on the U.S. 29- At other times, he have been places that cent stamp introduced in 1994 as part of a “Legends of the West” was a barber, a pro- series. Courtesy U.S. Postal Service. exert a powerful fessional gambler, a attraction to the faithful. People make pilgrimages faro dealer, bartender, saloonkeeper, a bouncer to shrines for many different reasons, for curiosity, in a brothel, a procurer, and even a brothel oper- but also for spiritual and emotional satisfaction. ator. At a young age Wyatt was also, in rapid Some pistol shooters have informal shrines at succession, a horse thief, jailbird, and escaped home, often inside their gun safes, where they give prisoner. Later in life, he had the unusual dis- thanks to Samuel Colt and John M. Browning. Oth- tinction of serving as a lawman in one Western ers travel from near and far to the Northern Califor- jurisdiction while at the same time being a want- nia cemetery where Wyatt Earp is buried. Here they ed man in another. visit what has become the shrine of the best-known In the Western states and territories after the gunfighter of the Old West. Civil War law and order was often for sale to the Wyatt Earp was born in Illinois, the son of a highest bidder and conflicts between lawmen Mexican War veteran, one of nine children and of representing different jurisdictions (federal vs. ter- six brothers. Newton (1837-1928), James (1841- ritorial, county vs. city) were common. Lawmen 1926), and Virgil (1843-1905) were older, while seldom owed their allegiance to abstract sets of Morgan (1852-1882) and Warren (1855-1900) laws laid down by national, state or territorial were younger. Of the three Earp sisters, Martha governments, but instead to local judges, mayors, (1845-1856), Virginia (1858-1861), and Adelia town councils, even ad-hoc groups of large (1861-1941), only one survived childhood. Too landowners. Many lawmen were little different young to enlist in the Union Army like his three from hired guns or “enforcers” who also, some- older brothers, Wyatt and his younger siblings times, wore badges, at least temporarily. The Gunfighter’s Shrine 79

In 1869 Wyatt took his first job in law Wyatt and Morgan, along with their friend, Doc enforcement, in Missouri, and got married short- Holliday, squaring off against Tom and Frank ly afterwards. Earp was married three times. His McLaury, Ike and Billy Clanton, and Billy Clai- first wife, Aurilla Sutherland (1849-1870), died borne. The McLaury/Clanton gang were horse of fever while still only 21 years of age, soon thieves and holdup men. Marshal Virgil Earp had after their wedding. By all accounts, this tragedy already had run-ins with them, and they had pub- sent him off the rails into an early criminal inter- licly threatened to kill the Earp brothers on several lude. He may have prior occasions. At met his second wife, the outset of the Mattie Blaylock half-minute shootout (1850-1888), a at very close range soiled dove, in a (only 10 feet) Ike house of ill repute. Clanton and Billy The couple lived Claiborne ran for together until just their lives, and the after the celebrated Earps and Holliday shootout at the O.K. killed all three of the Corral. Mattie was remaining oppo- an opium addict, nents. Long after the and Earp left her for duel, Virgil was his third and final badly wounded and wife, Josephine Mar- Figure 2: One of Wyatt and Josephine Earp’s grave markers, made Morgan was mur- cus (1861-1944). to replace a previous one that was stolen. The above marker was dered, both Mattie eventually itself stolen and recovered no fewer than three times. ambushed by friends overdosed on opium Brian Dervin Dillon photo. of the McLaurys and in 1888; her death the Clantons. Wyatt was ruled a suicide. Josephine, called Sadie by and Warren Earp and Doc Holliday, along with Earp, was the adventurous daughter of a well-to- others sworn in as federal marshals, then went do San Francisco merchant family. She was 13 after the remaining members of the Clanton/ years Wyatt’s junior, and they met while she was McLaury gang. They hunted down and killed still a teenager. Wyatt and Sadie spent more than Frank Stillwell, Indian Charley Cruz, Johnny 46 years together, and are buried in the Marcus Barnes, and Curly Bill Brocius over a six-month family plot in Colma period. near her parents and Sheriff Behan siblings. issued a warrant for Wyatt’s older Wyatt’s arrest, so he brother Virgil was the left Arizona Territory, Deputy U.S. Marshal moving to New of Tombstone, Ari- Mexico, then Col- zona Territory. By late orado, and eventual- July 1880, Wyatt had ly to San Francisco. become the Deputy Here, in 1882, he Sheriff of Pima Coun- was reunited with ty, which at the time Josephine Marcus. included Tombstone. The couple went off He only held the to Kansas, then to position for a few Idaho, and back to months, because of a California, San conflict with Sheriff Diego this time, John Behan. The always taking care to problem was exacer- Figure 3: Wyatt and Josephine Earp’s most recent grave marker, avoid Arizona Terri- bated when the two flanked by the Dillon brothers, Brian at left, David at right. tory and Behan’s men became rivals The present stone replaces earlier ones damaged or stolen. warrants. Mean- for the same woman, John D. y. Dillon photo, 2013. while, Wyatt’s par- Josephine Marcus, who later became Earp’s wife. ents moved to Colton, near San Bernardino, Cali- The famous gunfight at Tombstone’s O.K. Corral fornia, where his father, Nick Earp became Justice took place on October 26, 1881, with City Mar- of the Peace. Brother Virgil Earp, still recovering shal Virgil Earp, his deputized younger brothers from his Arizona wounds, became the Colton City 80

Figure 4: A selection of votive offerings left at Wyatt Earp’s grave by visitors. Common offerings are live pistol rounds, shell casings, coins, poker chips, dice, cigars, playing cards, imitation lawman’s stars, actual police insignia, photographs, and American flags. Brian Dervin Dillon Photo. Marshal. Wyatt and Sadie Earp moved back to San As Southern California grew to prominence in Francisco and then north to Santa Rosa in Sonoma the American movie industry, Wyatt Earp became County. Wyatt ran stables, raced horses, and again the first and most important advisor to early cow- worked as a boxing referee. His questionable boy actors and the makers of “horse operas.” This decision at a highly publicized heavyweight bout connection lasted through the entire silent era. The near San Francisco so outraged spectators that Earps now began spending their summers in Hol- death threats were made against him. lywood instead of Los Angeles. Characters portray- Wyatt and Sadie set off for Alaska for the ing Wyatt Earp in silent films appeared as early as Gold Rush of 1897, “mining the miners” by run- 1923, while he was still alive. Famous cowboy ning saloons and gambling halls. They returned movie stars William S. Hart (1864-1946) and Tom to the lower 48, first to Seattle in 1899, then, in Mix (1880-1940) were good friends of Earp, and 1902, to Tonopah, Nevada. Heading back to both were pallbearers at his 1929 funeral. The best California, Wyatt and Josephine spent the last of all the horse opera directors John Ford (1894- two decades of his life summering in Los Ange- 1973), another friend and admirer, was also in les, and prospecting all over the Colorado and attendance at Earp’s funeral. Mojave Deserts during the cooler months. Earp Dozens of books and hundreds of newspaper, carried a holstered, big-bore, pistol all his life. magazine, and journal articles have been written He frequently, even into the 1920s, had to be about Wyatt Earp and the O.K. Corral shootout, reminded to take it off when attending horse the first appearing during his own or Josephine’s races, boxing matches, or other “polite society” lifetime. Earp mistrusted reporters and writers, sel- events, when it was adjudged overly provoca- dom granting interviews. This did nothing to tive. In 1910 Wyatt began working as a contract diminish interest in his life, nor did it inhibit writ- bounty hunter for the Los Angeles Police Depart- ers from inventing a great many episodes that ment, making clandestine trips into Mexico so as never took place. Just about everything written to kidnap wanted criminals and bring them back about the Earp brothers falls into one of two cate- to the United States for trial. This connection gories, either spirited defenses, or vitriolic attacks unfortunately ended when he was arrested by upon them. What most books, articles, movies, the very same LAPD for gambling fraud. But Earp and T.V. programs about the Earps all have in com- was not yet done with law enforcement, for a mon is a near-absence of facts. Accuracy, whenev- dozen years later, in the mid-1920s; he was er found, is mostly accidental. made an honorary San Bernardino County After Wyatt’s death in 1929, Josephine Marcus Deputy Sheriff. Earp became the guardian and defender of Earp’s reputation. Wyatt’s widow was a shameless pro- izing it. These offerings, not surprisingly, 81 moter of a sanitized Earp legend, and did as much mostly connote gunfighting, gambling, or law as anyone else to blur the boundaries between his- enforcement. In many cases they simply com- torical fact and romantic fiction. This trend away memorate a visit to the open-air shrine to the from history towards mythology continued even most famous of all Western gunfighters. Some after her own death, perpetuated through the pub- offerings are left by cowboy wannabes, or by lication of a fraudulent biography attributed to her, those who watch too much T.V. and who cannot but actually fabricated by a writer who supposedly separate fantasy from reality. These take the form “discovered” a missing diary nearly 30 years after of coins, cigars, playing cards, postcards, photo- Josephine died in 1944. graphs, poker chips, dice, and even imitation And, soon after Wyatt’s death, Josephine Mar- lawman’s stars (Figure 4). cus Earp became embroiled in legal battles with But the most sincere offerings made to Wyatt Hollywood moguls, as she tried to keep film por- Earp, the Patron Saint of Pistoleros, are by mod- trayals of her husband positive. Over the years, ern pistol shooters, not infrequently law dozens of actors have portrayed Wyatt Earp on the enforcement officers themselves. We know of at big screen, from Henry Fonda to Jimmy Stewart to least one local agency that has its student can- Burt Lancaster to Kevin Costner. Over two-dozen didates visit Earp’s final resting place as an Wyatt Earp/O.K. Corral movies have been made informal part of its graduation requirements. At since the 1920s. In the 1950s, they were joined by least some of the live rounds left on Wyatt a T.V. series that ran into the early 1960s. Two Earp’s grave are votive offerings, much like the Wyatt Earp movies even appeared within a year of candles lighted inside houses of worship to each other, the first in 1993, the second in 1994. punctuate special prayers. These have been left And, during this latter year, Earp was commemo- to commemorate a “moment of quiet with rated by a U.S. postage stamp, part of a “Legends Wyatt.” The rounds left at Wyatt Earp’s grave are of the West” series (Figure 1). not just the .45 Colt and .44-40 ammunition Ever-increasing publicity through books, that lawmen used in the 1880s, but also .45 movies, and television for nearly a century turned ACP, .40 S&W, .357 Magnum, and 9mm jacket- the Earps’ gravesite into an attraction. Visitors ed hollow points, their functional equivalents include admirers, the curious, and those satisfying for today’s military and police. Occasionally, some kind of personal obligation. Their final rest- even police insignia in the form of shoulder ing place has become a shrine to which present- patches, collar badges, and name plates are left day law enforcement officers, single-action pistol in Wyatt’s care. Such offerings may be in satis- shooters, even foreign tourists enamored of Old faction of a vow or promise made earlier, but West mythology, make pilgrimages. Wyatt and more likely are intended to propitiate the spirit Josephine Earp’s headstones became the targets of of Wyatt Earp for future assistance. We hope souvenir-hunting vandals, and visitors chipped that he does indeed respond to such pilgrims by small flakes from them to take away as keepsakes. granting them good luck, speed and accuracy in Their first headstone, stolen 70 years ago, may their own pistol shooting, especially when the have been found, and we are taking steps towards chips are down and these qualities are needed its return. Their second grave marker (Figure 2) the most. was stolen three times, always recovered from a About the authors: Brian and David Dillon are broth- different location, indicating different thieves. ers, and fifth-generation Northern Californians. The Dil- Their very large present marker (Figure 3) was lon boys have a tenuous connection with the Earp clan erected about 10 years ago, and so far has not through their mother, a Sutherland, distantly related to Wyatt Earp’s first wife. Older brother Brian is an archae- been swiped. ologist, a firearms instructor, a third-generation hand- By this time, however, visitation patterns had loader and a regular contributor to The Blue Press. changed, and most pilgrims to Wyatt and younger Brother David enjoys restoring antique firearms Josephine Earp’s final resting place now leave as a hobby, and has worked for 25 years in the cemetery offerings on their grave marker instead of vandal- where Wyatt and Josephine Earp are buried. DP

ompetition Reloading with Evolution Gun Works CBrian Enos guides you through a complete step-by-step reloading process for IPSC, Steel Challenge Chamber Checkers and NRA Bianchi Cup style shoot- peed up the round-checking Cowboy Chamber Checker ing. Using a Dillon Precision XL Sprocess when you’re getting (.357 Mag.,.44 Mag., .44-40, 650 reloader with CP brass and CP ready for a match! EGW uses .45 Colt) L02-25375 $19.95 bullets, Enos demonstrates proper actual Clymer chamber reamers Rifle Chamber Checkers reloading techniques for the most to produce its chamber checkers. .223 Rem.L02-25377 $29.95 popular loads used by the top Pistol Chamber Checker 5.56x45 L02-25376 29.95 9mm L02-19846 $19.95 .308 Win. L02-18964 39.95 shooters. Enos is, of course, a cham- .38 Super L02-19847 19.95 .30-06 L02-19675 45.00 pion himself, winner of the Masters Competition, the .40 S&W L02-19848 19.95 Shotgun Chamber Checker NRA Bianchi Cup and a top contender in the USPSA for 10mm L02-19676 20.00 12 Ga. L02-19523 $49.99 many years. Run time: 80 minutes. .45 ACP L02-19849 19.95 20 Ga. L02-19524 49.99 L02-14341 $19.95 82 All Your Dillon-Video Favorites, NOW AVAILABLE On DVD!

“Firestorm in the Desert (Machine Gun Magic)” – Dillon’s own “Shooter Ready?” – Top quality instruction with all the video portraying the history and excitement of the machine gun excitement of a major motion picture. 30 min. hobby. 60+ min. VHS format L02-13361 $15.95 “Machine Gun Magic” DVD format L02-18312 $14.95 “Shooter Ready?” DVD format L02-18313 $14.95 “The Memphis Belle”/“The Fight for the Sky” “P51 Mustang”/“Corsair” Two-DVD Set L02-18320 $24.95 Two-DVD Set L02-18321 $24.95 SAVE $9.95 – Buy Both Air War DVD Sets L02-18319 $39.95

Lyman’s AR The Complete Reloading Hand- Reloading Manual book – Featuring for… loads for your AR Pretty much anything chambered in popu- you’re likely to be lar cartridges from loading! That’s right, the .204 Ruger to all the data published the .50 Beowulf. by the various bullet L02-10976 $12.99 and powder manufacturers for YOUR favorite cartridge. $9.95 each gun-guides Lyman’s Pistol and Handgun-Cartridge Manuals Complete guides for all Revolver Reloading .32 H&R Magnum L02-15361 models of Ruger .22 pistols, 10/22 rifles Handbook (Third .380 ACP L02-15362 and Mini-14s; and dis-/reassembly guides Edition) – The 9mm L02-15363 for other popular firearms. World’s Leading .38 ACP L02-15365 The Complete guide $11.99 each Handgun Reloading .38 Special L02-15364 Ruger .22 Pistols L02-40035 Manual. .357 Magnum L02-15366 Ruger 10/22 Rifle L02-40036 L02-18967 $21.95 10mm/.40 S&W L02-15367 Ruger Mini-14 L02-40037 .44 Special L02-15368 Dis-/Reassembly Only $6.99 each .44 Magnum L02-15369 1911 Pistols L02-40045 .45 ACP L02-15370 AK-47 L02-40038 .45 Colt L02-15371 Browning Buckmark L02-40039 Lyman 49th Rifle-Cartridge Manuals Colt AR-15 L02-40040 Edition .223 L02-15349 GLOCK Pistols L02-40041 Reloading Hand- .22-250 L02-15348 M1 Carbine L02-40042 book – Featuring .243 L02-15350 M1 Garand L02-40043 More Loads, the .270 L02-15351 Mauser Rifles L02-40044 Newest Compo- 7mm-08 L02-15352 Mosin-Nagant Rifles L02-40046 nents, Most Manu- 7mm Remington Magnum L02-15353 Mossberg 500 Shotguns L02-40047 facturers, and More 7.62 x 39 L02-15359 Remington 870 Shotguns L02-40048 Load Data than Ever! .30 M1 L02-15354 Remington 1100 Shotguns L02-40049 L02-10330 $24.95 .30-30 L02-15355 Ruger Mk III Series .22 Pistols L02-40050 .308 L02-15356 Ruger Single-Action Revolvers L02-40051 .30-06 L02-15357 SKS Rifles L02-40052 Lyman Shotshell Re- .300 Winchester Magnum L02-15358 S&W M&P/Shield Pistols L02-43230 loading Handbook, .45-70 L02-15360 5th Edition – The 1903 Springfield Rifles L02-40061 Number One Shot- Springfield XD & XDM Pistols L02-40053 Reloading guides – Winchester 1300 Shotguns L02-40054 shell Loading Man- These guides are com- ual. piled from the most L02-12846 $25.95 Traveler’s guide to the recent data available Firearm Laws of the Fifty from all the major pow- States – The myriad of der and bullet manufac- firearm laws facing the turers.The convenient gun owner of the early binding allows the guide 21st Century can be intim- to lie open and flat on Speer Reloading idating when traveling. your bench. Manual, Rifle & L02-30201 $9.95 $12.99 each. Pistol (Number 14) Revolver Guide L02-40010 – The ultimate load- Practical Shooting: Beyond .45Colt/.454/.460/.475/.480/.500 L02-40060 ing guide for shoot- Fundamentals – The keys to Pistol Guide L02-40009 ers who are using consistent, high-speed .223/.22-250 Guide L02-11762 Speer projectiles. shooting are within you .243/.270 Guide L02-40081 L02-12580 $29.95 right now. This book will .308/.30-06 Guide L02-12209 show you ways to bring .300 Win, Short, Ultra Mag L02-12210 them out. 7mm-08/7mm Rem, Ultra Mag L02-12211 L02-10750 $19.95 800-223-4570 or 480-948-8009 • FAX 480-998-2786 • 24-Hour On-Line Ordering @ www.bluepress.com Wise Company’s “Grab & Go” Emergency Food Kits83

e prepared for any emergency with Wise Company’s 72 Hour ise Company’s 60 Serving Gourmet Entrée Only “Grab BEmergency Entrée Kit. Each kit includes four servings per Wand Go” Food Kit includes two servings per day (entrées day (total of 12 servings) of 20 ounce lunch and dinner entrées only) for one adult for one month or four adults for one week. Prod- shown in the following schedule: Day 1: Two 10-ounce servings of uct within this Bucket Cheesy Lasagna and Beef cook-in-the-pouch entrée; and two 10- is: Savory Stroganoff (8 ounce servings of Pasta Alfredo with Chicken cook-in-the-pouch en- servings), Chili Maca- trée. Day 2: Two 10-ounce servings of Noodles and Beef in Savory roni (8 servings), Pasta Mushroom Sauce cook-in-the-pouch entrée; and two 10-ounce Alfredo (8 servings), servings of Teriyaki Chicken Creamy Pasta and Veg- and Rice cook-in-the-pouch etable Rotini (8 serv- entrée. Day 3: Two 10-ounce ings), Cheesy Lasagna servings of Chili Macaroni with (4 servings), Teriyaki Beef cook-in-the-pouch entrée; and Rice (8 servings), and two 10-ounce servings of Creamy Ala King and Creamy Pasta and Vegetable Rice (8 servings), and Rotini with Chicken cook-in- $37.95 Creamy Tomato Basil $119.95 the-pouch entrée. L02-15296 Soup (8 servings). L02-15297

ise Company’s 60 Serving Gourmet Freeze Dried Meat ise Company’s 120 Serving Breakfast Only “Grab & W“Grab & Go” Food Kit includes 60 servings of assorted WGo” Food Kit includes 120 servings of breakfast assort- gourmet-seasoned freeze dried meat and a 20-serving bonus of ment (no en- long-term emergency rice, for a total of 80 servings. Product trées). Product within this Bucket within this is: Roasted Chicken Bucket (12 servings), Teriyaki is: Apple Cin- Style Chicken (8 serv- namon Cereal ings), Cheesy Beef (8 (40 Servings), servings), Southwest Crunchy Gra- Style Chicken (12 serv- nola (40 Serv- ings), Savory Roasted ings), and Ground Beef (12 serv- Brown Sugar ings), Stroganoff Style and Maple Beef (8 servings), and Multi-Grain Long-Term Instant Rice $129.99 (40 Servings). $199.00 (20 servings). L02-15299 L02-15303

ise Company’s 120 Serving Freeze Dried Vegetable ise Company’s 120 Serving Freeze Dried Fruit and Wand Sauce “Grab & Go” Food Kit includes 120 servings WSnack “Grab & Go” Food Kit includes 120 servings of of vegetable and fruit and snack assort- sauce assortment. ment. Product within Product within this this Bucket is: Ba- Bucket is: Corn (24 nanas (16 servings), servings), Peas (16 Strawberries (16 serv- servings), Broccoli (24 ings), Peaches (16 servings), Green servings), Apples (16 Beans (24 servings), servings), Caramel Butter Sauce (8 serv- Sauce (16 servings), ings), Cream Sauce (8 Yogurt (16 servings), servings), Cheese and Pudding (16 Sauce (8 servings), Servings). and Mushroom Sauce (8 Servings). $134.99 $144.99 L02-15302 L02-15300

n-Target Productions, Ltd. videos are “AK-47” 40090 $19.95 “Ruger Mk. 2” 40091 19.95 Odesigned to educate enthusiasts about “AR-15” 40087 19.95 “Ruger Mk. 3” 40097 19.95 the selection, proper use, cleaning, disas- “AR-15 Maint. & Mods” 40099 24.99 “Ruger 10/22” 40088 19.95 sembly/reassembly, and accessorizing of “Scratch Building an AR-15” 40101 19.95 “Ruger Mini-14” 40096 19.95 firearms. On-Target Productions’ videos are “1911” 40086 19.95 “SKS” 40093 19.95 100 percent digital quality, focused on the “GLOCK” 40083 19.95 “S&W M&P” 40084 19.95 details and are entertaining and educational. “M1 Carbine” 40095 19.95 “S&W Revolvers” 40100 19.95 Every video features clear, close-up photog- “M1 Garand” 40094 19.95 “Sig Sauer P226” 40098 19.95 raphy to enhance the instructional narrative “Mossberg 500” 40092 19.95 “Springfield Armory XD” 40085 19.95 from start to finish. “Remington 870” 40089 19.95 All videos are DVD format. Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included

COMPETITIVE EDGE DYNAMICS85

CED M2 Chronograph CED7000 Timer L02-17926 $199.00 L02-19208 $119.95

M2 Chronograph Accessories he M2 Chronograph comes with sensors, screens and Infrared Chronograph Upgrade Kit L02-12116 $89.00 Tone two-foot mounting bracket. A nylon carrying case Rechargeable Batt. Pack for Above L02-12117 48.00 and tripod are available options. The CED7000 Shot Nylon Carrying Case L02-18145 35.95 Timer is a breakthrough in technology. No other timer to Tripod L02-18126 39.95 date offers this combination of advanced features, com- 2-Ft. Skyscreen Mounting Bracket L02-18120 14.95 pact size and light weight. This is the “next generation” Replacement Skyscreens L02-18124 21.95 Shot Timer here today! Comes with a rechargeable battery Replacement M2 Sensor L02-18877 36.95 with low-battery LCD indicator and a universal charger. Cavalry Arms Medical Trauma Kits obody likes to think about it, but should a serious Nhunting/shooting accident occur, chances are the drugstore “first aid kit” you have stashed under the seat of your truck won’t do much good. That’s why Cavalry Arms Medical has produced trauma kits designed by Armed Forces medics. The Cavalry Arms Medical P.T.K. (Personal Trauma Kit) contains a 15-gram package of Celox granules to control serious bleeding, Nitrile gloves, a high-intensity Chem- Light, a six-inch Emergency Bandage with a second pad, and a 4.5-inch Kerlix Roll. The A.T.K. (Advanced Trauma Kit) contains one 15- gram package of Celox granules, Nitrile gloves, a CPR Face Barrier, two VioNex Anti-Microbial Wipes, a high- intensity Chem-Light, two 4-inch Emergency Bandages, one 4.5-inch Kerlix Roll, two 2-inch Kerlix Rolls, one 3- inch Elastic Bandage, and two 5 x 9-inch sterile Abdomi- nal Pads. All contents of both kits are currently in use by Personal Trauma Kit (P.T.K.) L02-19220 $34.95 real-world combat medics. Advanced Trauma Kit (A.T.K.) L02-19322 69.95 Open 7-6 MST, M-F; 8-3 Sat. • VISA, MasterCard, Discover, C.O.D. • Shipping and HazMat Not Included 86 D-TERMINATOR D-TERMINATORElectronicElectronic ScaleScale Lyman Powder Pal

Funnel Pan L02-18399 $5.95

$139.95 L02-10483

• 900 grain/57 gram capacity • Accurate to 0.1 grain/0.01 gram • Uses four AA batteries (included) • Comes with its own AC adapter • Scale check weight included Scale Cover L02-18387 $14.95 (See Page 52 for additional scale check weight sets.) (Note: Only fits current scale.) All the electrical/electronic components of Dillon equipment are covered by a one-year warranty from date of purchase. DILLON’S ‘ELIMINATOR’ SCALE

$69.95 L02-13480 87 PAID PRSRT STD PRSRT U.S. Postage Dillon Precision ERGO Grip Delta Grip™ See Page 60 EGW AR-15 Forward Assist Plug See Page 55 Smith Enterprise, Inc. Vortex® The BLUE PRESS Dillon Precision Products, Inc. Way 8009 E. Dillon’s AZ 85260-1809 Scottsdale, Flash Eliminators See Page 75 Sun Devil Mfg. ADIGS for AR-15s Scan QR Code

101 See Page 55 Classic Firearms California L02-40133 Competition $29.95 Autographed Works L02-97130 Magwells $34.95 for GLOCKs See Page 59

DILLON PHONE NUMBERS Orders/Expert Assistance: 800-223-4570 2015 For orders and technical assistance. Order Status/Basic Orders: 800-762-3845 Dillon Precision Order by stock numbers only (no technical questions please); or to quickly check the status of your order. Products Calendar Catalog Request: 800-762-3844 L02-09992 $12.95 To order The Blue Press catalog. Dillon Showroom Hours: M-F, 9a-6p; Sat., 8a-3p