School Uniform St John’S Rc Academy

Total Page：16

File Type：pdf, Size：1020Kb

OUR AIMS & VALUES TREE SCHOOL UNIFORM ST JOHN’S RC ACADEMY ST JOHN’S RC ACADEMY ST JOHN’S RC ACADEMY North Inch Community Campus Gowans Terrace Perth PH1 5BF Phone: 01738 454300 MAKING OUR UNIFORM UNIFORM E-mail: [email protected] Twitter: @st_johnsacademy May 2015 OUR UNIFORM In St John’s RC Academy we ‘Seek the PRIMARY UNIFORM SECONDARY UNIFORM Good’ in ourselves, in others and in every aspect of our lives. Black dress trousers/shorts or skirt/culottes Black dress trousers or skirt We are proud to be part of our community and we have agreed a uniform White school shirt White school shirt which we are proud to wear. Grey jumper/cardigan (with or without the school badge) S1-3: Black jumper/cardigan/hoodie (with or without the We recognise that through wearing our which allows the school tie to be seen school badge) which allows the school tie to be seen uniform we are demonstrating that we School tie School tie are ready to work and ready to learn. BGE (for P1-S3) tie available at the school office BGE tie (for P1-S3); Senior tie (for S4-6) available at school office We also believe that our uniform helps Black shoes/trainers with black laces Black shoes/trainers with black laces everyone to belong—it is an important Plain black only Plain black only symbol that we are a community and Purple and white summer dress during the summer School blazer with purple braiding that each of us contributes to making months (optional) S1-3: Optional. S4-6: Essential. our community great. Black /purple outdoor jacket Black outdoor jacket School versions in both black and purple are available School versions in both black and purple are available White tee/polo shirt, black shorts and trainers for PE White tee/polo shirt, black shorts /joggers and trainers for Indoor black shoes can be used PE ST JOHN’S RC ACADEMY WHAT TO AVOID For clarity, the following are NOT part of the school uniform: Denim/leather/PVC clothing, any clothing or bags with football logos, clothing with offensive slogans or prominent branding, low-cut tops, large hooped earings or dangling earings, facial piercing (including nose or lip piercing), large necklaces, scarves (other than black), brightly coloured or white shoes/trainers (except in PE), tracksuits or joggers (except in PE), basketball/converse trainers, leggings, lace jumpers/ tops/tights. SUPPLIER Our current uniform supplier is Academy Uniforms: www.academyuniformsltd.co.uk Thank you for supporting our community by supporting our uniform. .

Copy Link

Recommended publications

Newsletter Term 1 19-20
Heritage Skills Event Fifteen of our students attended a workshop session in Perth City Centre aimed at promoting careers using traditional building skills. The event, organised by Perth and Kinross Heritage Trust, gave the pupils an experience of using traditional skills of carpentry, stone masonry, slating and painting. Our students thoroughly enjoyed the event, and some of them highly impressed the organisers! The event was even attended by Depute First Minister, John Swinney MSP, who took time out of his busy schedule to chat to our students and congratulate them for taking part. Primary Language Ambassadors Welcome to our new group of P5-7 Language Ambassadors for this year! They are enthusiastic about celebrating all the languages spoken in St John's Academy and are looking forward to supporting language learning throughout the school. This year's Language Ambassadors are already bursting with ideas, including competitions, lunch clubs and quizzes. Their first task has been to celebrate 'European Day of Languages' on Thursday, 26th September. European Day of Languages On Thursday, 26th September, we celebrated the European Day of Languages. Many classes took part in numerous activities for the promotion of languages. We had fun dressing up in costumes from around the world, completed quizzes about Europe, translated Follow us on Twitter music titles and increased our vocabulary for @sja_languages greeting people in a language other than their mother tongue as well as discussing the benefits of having knowledge of more than one language. Our pupils approached the many activities with great gusto! In addition, on a recent visit to the school, Bishop Stephen Robson was more than happy to help fly the language flag by joining the Senior Leadership Team for a photograph to celebrate this special day.
[Show full text]
Review of Exposure Data and Assessments for Select Dialkyl
TABLE OF CONTENTS 1. INTRODUCTION ........................................................................................................... 1-1 2. PRODUCTION AND USE OF PHTHALATES ............................................................. 2-1 2.1. PRODUCTION OF PHTHALATES ................................................................... 2-1 2.1.1. Production of DEHP ................................................................................ 2-1 2.1.2. Production of DBP ................................................................................... 2-2 2.1.3. Production of BBP ................................................................................... 2-2 2.1.4. Production of DINP ................................................................................. 2-3 2.1.5. Production of DIDP ................................................................................. 2-3 2.1.6. Production of DnOP ................................................................................. 2-4 2.2. USE OF PHTHALATES ..................................................................................... 2-4 3. PHYSICO-CHEMICAL AND ENVRONMENTAL FATE PROPERTIES OF PHTHALATES ................................................................................. 3-1 3.1. PHYSICO-CHEMICAL PROPERTIES OF PHTHALATES ............................. 3-1 3.1.1. Benzyl butyl phthalate (BBP) .................................................................. 3-1 3.1.2. Di-n-butyl phthalate (DBP) .....................................................................
[Show full text]
Polyvinyl Chloride - Wikipedia Polyvinyl Chloride
1/24/2020 Polyvinyl chloride - Wikipedia Polyvinyl chloride Polyvinyl chloride (/ˌpɒlivaɪnəl ˈklɔːraɪd/;[5] colloquial: Polyvinyl chloride polyvinyl, vinyl;[6] abbreviated: PVC) is the world's third-most widely produced synthetic plastic polymer, after polyethylene and polypropylene.[7] About 40 million tonnes are produced per year. PVC comes in two basic forms: rigid (sometimes abbreviated as RPVC) and flexible. The rigid form of PVC is used in construction for pipe and in profile applications such as doors and windows. It is also used in making bottles, non-food packaging, food-covering sheets,[8] and cards (such as bank or membership cards). It can be made softer and more flexible by the addition of plasticizers, the most widely used being phthalates. In this form, it is also used in plumbing, electrical cable insulation, imitation leather, flooring, signage, phonograph records,[9] inflatable products, and many applications where it replaces rubber.[10] With cotton or linen, it is used to make canvas. Pure polyvinyl chloride is a white, brittle solid. It is insoluble in alcohol but slightly soluble in tetrahydrofuran. Contents Discovery Production Microstructure Names Producers IUPAC name Additives poly(1-chloroethylene)[1] Phthalate plasticizers Di-2ethylhexylphthalate Other names Metal stabilizers Polychloroethylene Heat stabilizers Identifiers Properties CAS Number 9002-86-2 (http://ww Mechanical w.commonchemistry. Thermal and fire org/ChemicalDetail.a Electrical spx?ref=9002-86-2) Chemical Abbreviations PVC Applications ChEBI CHEBI:53243
[Show full text]
Ross Bennett @Golder.Com
REPORT ON-PROPERTY SITE INVESTIGATION WORK PLAN Saint-Gobain Performance Plastics Facility 701 Daniel Webster Highway in Merrimack, New Hampshire Submitted to: New Hampshire Department of Environmental Services Hazardous Waste Remediation Bureau 29 Hazen Drive, PO Box 95 Concord, New Hampshire 03302 Submitted by: Saint-Gobain Performance Plastics Corp. 14 McCaffrey Street Hoosick Falls, New York 12090 Submitted by: Golder Associates Inc. 670 North Commercial Street, Suite 103 Manchester, New Hampshire, USA 03101 June 8, 2018 June 8, 2018 1668623 Table of Contents 1.0 INTRODUCTION ............................................................................................................................................. 1 2.0 BACKGROUND .............................................................................................................................................. 1 2.1 Property and Facility History ................................................................................................................ 1 2.2 Summary of Previous Investigations .................................................................................................... 3 3.0 PRELIMINARY CONCEPTUAL SITE MODEL .............................................................................................. 3 3.1 Geologic and Hydrogeologic Setting .................................................................................................... 4 3.2 Potential Releases and Transport Mechanisms .................................................................................
[Show full text]
Adapting at the Speed of Style with HP Server and Storage Blades
Adapting at the speed of style with HP server and storage blades Speeding electronic orders by sixfold while offering 99.99% uptime with HP servers and storage “Before, it could take up to a half hour to process a large EDI. Now with a clustered Oracle environment on our HP BL460c server blades, those orders are processed sixfold faster in under five minutes.” — Enrico Bozzetti, IT manager, Excelled Sheepskin & Leather Objective Eliminate ordering bottlenecks while boosting availability to enable growth Approach Create a clustered environment for Oracle Database 10g R2 using HP Converged Infrastructure technologies including ProLiant G6 server blades and HP StorageWorks storage blades in a single HP BladeSystem c3000 enclosure HP customer case study: HP ProLiant IT improvements BL460c G6 server blades • Sixfold faster electronic data interchange (EDI) HP StorageWorks storage processing blades • 99.99% uptime, with 60–120 hours of planned Industry: manufacturing downtime eliminated • Saving 40 hours per month through remote Fashion forward server management Wandering the clothing aisles at a major department • 60% faster storage provisioning store can be like an adventure through your various personality traits. Do I go conservative and safe, Business benefits or am I in the mood for an of-the-moment fashion • Eliminates electronic order bottlenecks statement? A good way to do both is by drifting over to the leather goods section, where the sleek and • Faster report generation supple jackets are timelessly cool. • 20% year-over-year data growth supported by an IT staff of two Though department stores do a great job of merchandising and marketing the end product, • Near 60% projected savings on power and creating these works of self expression is left to cooling in five years vs.
[Show full text]
PVC Jars and Bottles
PVC Jars and Bottles Polyvinyl chloride, (IUPAC Poly(chloroethanediyl)) commonly abbreviated PVC, is a thermoplastic polymer. It is a vinyl polymer constructed of repeating vinyl groups (ethenyls) having one of their hydrogens replaced with a chloride group. Polyvinyl chloride is the third most widely produced plastic, after polyethylene and polypropylene.PVC is widely used in construction because it is cheap, durable, and easy to assemble. PVC production is expected to exceed 40 million tons by 2016. It can be made softer and more flexible by the addition of plasticizers, the most widely used being phthalates. In this form, it is used in clothing and upholstery, and to make flexible hoses and tubing, flooring, to roofing membranes, and electrical cable insulation. It is also commonly used in figurines and in inflatable products such as waterbeds, pool toys, and inflatable structures. Preparation Polyvinyl chloride is produced by polymerization of the vinyl chloride monomer (VCM), as shown.Since about 57% of its mass is chlorine, creating a given mass of PVC requires less petroleum than many other polymers.[citation needed] However, because PVC also has a much higher density than hydrocarbon polymers, and chlorine production has its own energy requirements, this ends up being of little practical relevance in the production of most solid objects. By far the most widely used production process is suspension polymerization. In this process, VCM and water are introduced into the polymerization reactor and a polymerization initiator, along with other chemical additives, are added to initiate the polymerization reaction. The contents of the reaction vessel are continually mixed to maintain the suspension and ensure a uniform particle size of the PVC resin.
[Show full text]
Aggregate Exposures to Phthalates in Humans
Aggregate Exposures to Phthalates in Humans July 2002 ACKNOWLEDGMENTS Contributors Joseph DiGangi, PhD, USA, Ted Schettler MD, MPH, USA Madeleine Cobbing, UK Mark Rossi, MA, USA Reviewers HCWH thanks the following individuals for reviewing an earlier draft of this report. Their comments and sug- gestions were invaluable and substantially improved the manuscript. We are grateful for their contribution. Their review, however, does not constitute endorsement of the report or its conclusions. Two additional reviewers chose to remain anonymous. Earl Gray PhD Michael McCally MD, PhD The contributing authors would also like to thank Cecilia DeLoach, Tracey Easthope, Per Rosander, Jamie Harvie and Charlotte Brody for their editing and proofreading of this report. Health Care Without Harm 1755 S St. NW, Suite 6B • Washington, DC 20009 • www.noharm.org • 202-234-0091 Contents Acknowledgements......................................................................................ii Executive Summary.....................................................................................1 Abbreviations..............................................................................................4 Preface......................................................................................................5 Introduction................................................................................................6 Phthalates in Consumer Products.................................................................9 Phthalate Toxicity ......................................................................................14
[Show full text]
Material Safety Data Sheet
MATERIAL SAFETY DATA SHEET Trade Name: Power Capsule, #8791 Date Prepared: August 1999 Revised: March 2004 Section I: - Source Information Manufacturer's Name: Michigan State Industries, Inc. Address: Ryan Correctional Facility Emergency Phone: (313) 368-3200 x51412 (800) 222-1222 Poison Control Technical Information: (313) 368-3200 x51412 Chemical Name: Detergent Section II - Hazardous Ingredients/Identify Information Hazardous Components CAS No. OSHA PEL* ACGIH TLV* Percentage Sodium Hydroxide 1310-73-2 2mg/m3 2mg/m3 <22% Sodium Metasilicate 6834-92-0 <9% No exposure limits have been established for this specific product however, the following limits may apply Sodium Dichloro-S-Triazinetrione 2893-78-9 10mg/m3 <3% Although OSHA and ACGIH have not established specific exposure limits for this material, they have established for the following nuisance dusts. OSHA PEL/TWA: TOTAL 15mg/m3; RESPIRABLE 5mg/m3 ACGIH TLV/TWA TOTAL 10mg/m3; RESPIRABLE 5mg/m3 *Exposure limits expressed as eight-hour time-weighted average concentrations in parts of contaminant per million parts of air by volume (ppm). "Other Limits" are recommended by the National Institute for Occupational Safety and Health (NIOSH) and are time-weighted over ten hours unless otherwise specified. Section III - Physical/Chemical Characteristics Boiling Point: N/A Specific Gravity: NO DATA Vapor Pressure: N/A Vapor Density: N/A Evaporation Rate: (Ethyl Ether =1): N/A Solubility in Water: Complete Appearance and Color: White powder, chlorine odor Section IV- Fire and Explosion Hazard Data: Flash Point: N/A Flammable Limits: LEL: N/A UEL: N/A Extinguishing Media: This material is not combustible. Foam, carbon dioxide or dry chemical may be used in areas where this product is stored.
[Show full text]
Toxicity Review for Di(2-Ethylhexyl) Phthalate (DEHP)
(including carcinogenicity, neurotoxicity, and reproductive and developmental toxicity) are assessed by the CPSC staff using guidelines issued by the Commission (CPSC, 1992). If it is concluded that a substance is “toxic” due to chronic toxicity, then a quantitative assessment of exposure and risk is performed to evaluate whether the chemical may be considered a “hazardous substance”. This memo represents the first step in the risk assessment process; that is, the hazard identification step. * These comments are those of the CPSC staff, have not been reviewed or approved by, and may not necessarily represent the views of, the Commission. Page 2 of 2 KRC Table of Contents Tables ...................................................................................................................................v Figures............................................................................................................................... vii Appendices ........................................................................................................................ vii Abbreviations ................................................................................................................... viii Executive Summary .............................................................................................................x 1. Introduction ....................................................................................................................1 2. Physico-chemical Characteristics ..................................................................................1
[Show full text]
Relaunched with Honour Submitted By: Honour Ltd
New Sites! Relaunched with Honour Submitted by: Honour Ltd. Wednesday, 27 June 2007 Fetish favourites 'Honour' have recently relaunched their two main websites in dazzling style. www.honour.co.uk (http://www.honour.co.uk) is their 'flagship' site which hosts a huge selection of kinky clobber including rubber and PVC clothing, bondage gear, sex toys, fetish equipment, wigs, shoes, books, magazines, DVDs, lingerie, hosiery and much much more besides. www.honourclothing.com (http://www.honourclothing.com) has a more specific focus on their own clothing ranges, whilst also offering a selection of certain fetish accessories, wigs, shoes, lingerie, corsets, and sex toys. 'Honour' was first established 19 years ago and has been going from strength to strength ever since. Now one of the biggest fetish retail/wholesale companies, they still pride themselves on the manufacture of their own quality rubber and PVC collections. MD Amanda Taylor told us "After extensive research into our customers feedback regarding our website, we were excited to develop and redesign our new site to cater to specifications we believe our customers deserve". The new main site has been completely redesigned, with a new layout that makes navigation simpler and more straight forward. There are a couple of exciting new features and their facilities have been updated to comply with their customers increasing demands in on-line shopping. A new menswear (http://www.honour.co.uk/catalog/index.php?cPath=447) section is dedicated entirely to their collections for men including rubber and PVC clothing, underwear, bondage gear, leather and toys: which has already proved very popular with their male clientèle.
[Show full text]
BEIN =DJH:H 6G: @>AA>C< I=: 8>IN 8:CIG: ¶ 6C9 L=6I L: 86C 9D 67DJI >I
=DL:BEIN=DJH:H6G: @>AA>C<I=:8>IN8:CIG: ¶6C9L=6IL:86C9D 67DJI>I I]ZBjg`nLViZghd[i]Z7ajZAV\ddc>XZaVcY^X=ZgdZh^cAîZgVijgZ7dW9naVch<aVhcdhi >XZaVcYVcY:hidc^V"BdgZH^bâVgI]VcndjB^\]iI]^c`H]dee^c\6ajb^cjb;dâLî]BVgi]VHX]lVgio ^c[d#68dbeaZiZ8în<j^YZVcYA^hi^c\h/BVe!9^c^c\!Bjh^X!6gihVcY:kZcih >hhjZ%+$$BVn'("?jcZ*'%%- 02 | Reykjavík Grapevine | Issue 06 2008 | Year 6 | May 23 – June 05 The Reykjavík Grapevine Opinion Vesturgata 5, 101 Reykjavík www.grapevine.is One Reporter’s Opinion 08 [email protected] An opinion by Haukur Magnússon www.myspace.com/reykjavikgrapevine Published by Fröken ehf. Aussie Adventures in Iceland! 08 A column by Iris Goemans Editorial: +354 540 3600 / [email protected] Advertising: +354 540 3605 / [email protected] Articles Publisher: +354 540 3601 / [email protected] Where do These People Come From? 06 Interview with Magnús Þór Hafsteinsson of the liberal party The Reykjavík Grapevine Staff Publisher: Icelandic Heroes of Foreign Literature 10 Hilmar Steinn Grétarsson Andrew Clarke studies Icelanders in world literature [email protected] Editor: Bob Dylan’s Glasnost 12 Sveinn Birkir Björnsson / [email protected] Dylan is visiting us for the second time. Rejoice! Assistant Editor: Steinunn Jakobsdóttir / [email protected] My Morning with Martha Schwartz 13 Contributing Writers: Aluminium can be seductive and dangerous Haukur Magnússon / [email protected] Ian Watson / www.ianwatson.org Concert Reviews 18 Páll Hilmarsson / [email protected] Amiina / Valgeir Sigurðsson / Ólafur Arnalds Editorial Intern:
[Show full text]
MATERIAL SAFETY DATA SHEET PROSOCO, Inc
MATERIAL SAFETY DATA SHEET PROSOCO, Inc. I PRODUCT IDENTIFICATION MANUFACTURER’S PROSOCO, Inc. EMERGENCY TELEPHONE NUMBERS: NAME AND ADDRESS: 3741 Greenway Circle 8:00 AM – 5:00 PM CST Monday-Friday: 785/862-4200 Lawrence, KS 66046 NON-BUSINESS HOURS (INFOTRAC): 800/535-5053 ® PRODUCT TRADE NAME: Enviro Klean Composite Deck Protector II HAZARDOUS INGREDIENTS ACGIH CHEMICAL NAME (COMMON NAME) CAS NO. NFPA CODE OSHA PEL/TWA TLV/TWA None Oligomeric alkyl alkoxysiloxane Proprietary* Proprietary* 2,0,0- None established established Dipropylene Glycol Methyl Not (DPM) 034590-94-8 0,2,0,- Not established Ether established * Specific chemical identity withheld pursuant to OSHA regulations. III PHYSICAL DATA VAPOR BOILING POINT VAPOR DENSITY EVAPORATION RATE PRESSURE (°F) (Air = 1) (Butyl Acetate = 1) (mm Hg) Oligomeric alkyl alkoxysiloxane ND ND ND ND Dipropylene glycol methyl ether 374°F .41 (@25°C) 5.14 .02 SPECIFIC SOLUBILITY APPEARANCE AND GRAVITY IN WATER ODOR Milky, white liquid, slight Composite Deck Protector 1.00 Complete odor IV FIRE AND EXPLOSION HAZARD DATA EMERGENCY OVERVIEW ® Enviro Klean Composite Deck Protector is a milky, white liquid with a slight odor. May cause skin and eye irritation on contact. Inhalation of mist may cause nasal, throat, or lung irritation. Repeated skin contact may cause allergic skin reaction. FLASH POINT (METHOD): > 212 °F FLAMMABLE LIMITS: Not determined. EXTINGUISHING MEDIA: Water, carbon dioxide, dry chemical, dry powder. SPECIAL FIRE FIGHTING PROCEDURES: Wear full protective clothing, including helmet, self-contained, positive pressure or pressure demand apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and protective covering for exposed areas of the head.
[Show full text]