Vancouver INTERTECH 2003 Pre-Alloyed Sintered Bond Powder Development Efficient Wheel Dressing Promotes Efficient Cutting Tool Production Superabrasives

Total Page:16

File Type:pdf, Size:1020Kb

Vancouver INTERTECH 2003 Pre-Alloyed Sintered Bond Powder Development Efficient Wheel Dressing Promotes Efficient Cutting Tool Production Superabrasives REGISTER2003 SUPERABRASIVES NOW for INTERTECH 2003, RESOURCE the BIGGEST DIRECTORYEVENT of 2003! SPRING 2003 $8.00 Non-Ferrous Applications & Technology FALL/WINTER 2002 $8.00 Vancouver INTERTECH 2003 Pre-Alloyed Sintered Bond Powder Development Efficient Wheel Dressing Promotes Efficient Cutting Tool Production Superabrasives Resource Directory Permit No. 6159 No. Permit •Companies by Cincinnati, OH Cincinnati, Classification AID P U.S. POSTAGE U.S. • Products & Services RR STD PRSRT ABC offers a complete range of industrial diamond and CBN products. ABC specializes in customizing our products to meet individual requirements. Contact: ABC Superabrasives 6650 Park of Commerce Blvd. Boca Raton, FL 33487 Tel: (561) 995-7900 • Fax: (561) 995-7979 E-Mail: [email protected] ISO 9001:2000 Registered feature articles 6 INTERTECH 2003! 10 Pre-Alloyed Sintered Bond Powder Development 20 Efficient Wheel Dressing Promotes Efficient Cutting Tool Production 24 Superabrasives Resource Directory of 6 Companies & Organizations by departments Classification 4 A Finer Point of View 37 Calendar of Events 8 Editorial 9 Membership 39 Superabrasives Resource Directory of Application Products & Services by Company 18 Announcements & Products 19 News & Notes 6 18 24 56 Checklist of things to do ... 10 20 COVER PHOTO Courtesy of ABmart..................................................... 28 Lands Superabrasives Co. .................... 15 Vancouver Bureau of Tourism ABC Superabrasives ............................ IFC Lieber & Solow Co. .............................. 27 Action Superabrasive Products ........... 28 Milacron Inc. ........................................... 5 FINER POINTS is the only publication Agathon Machine Tools, Inc. ............. 16 National Research Co. ........................ 18 devoted exclusively to the understanding, American Superabrasives Corp. .......... 23 Rosst Enterprises Inc. ............................ 9 selection and application of diamond, cubic BGRIMM............................................... 21 SAT Superabrasive Techniques .......... IBC boron nitride and related materials. It is Crystallume Engineered Diamond .... 30 SP3 .......................................................... 14 edited for recipients who are involved in some Diamond Abrasives Corp. ................... 38 Sumitomo Electric Carbide Inc. ..... OBC way with these “superabrasives”, either as providers of the materials, producers of Diamond Associates ............................. 29 Trenker Abrasive Plant Technology .... 17 products containing the materials or users of Engis Corporation .................................. 8 UAMA ..................................................... 24 these products (e.g., grinding wheels, General Industrial Diamond ............. 55 U.S. Synthetic Corp./Diamicron Inc. ..... 36 dressing tools, drill bits, saw blades, sawing IDA .......................................................... 24 Warren/Amplex Superabrasives .......... 41 wires, cutting tools, polishing compounds, advertisers Kinik Company .................................. 33 CVD film products, etc.). Lach Diamond Inc............................... 26 2003 Superabrasives Resource Directory FINER POINTS 3 A Finer Point of View... INTERTECH 2003 HOLDS PROMISE AND DIRECTION FOR SUPERABRASIVES INDUSTRY PRESIDENT André Spelbrink Building on the success of Lieber & Solow Co. INTERTECH 2000 the Industrial Diamond Association has been moving forward with the second VICE PRESIDENT edition of this outstanding global David L. Edwards event. Milacron Inc. The world is coming to Vancouver and it will be an excellent “meeting of SECRETARY/TREASURER the minds”. This year the steering Joseph M. Haag committee has put together an Action Superabrasive Products, Inc. impressive program with presentations selected from almost 90 PRESIDENT BOARD OF DIRECTORS abstracts covering literally every aspect André Spelbrink of new technology and application Ion C. Benea (00-03) development in the superabrasive and information is at his or her fingertips Engis Corporation ultra-hard material industry. As we with a click of a mouse… Speed is Martin Deakins (03-05) review these papers, we are truly only limited by the type of Internet GE Superabrasives impressed with the developments and connection. Today’s scientist feels innovation being accomplished by Robert Linares (01-03) hampered if the speed of his/her Apollo Diamond, Inc. our international colleagues. connection is too slow! David M. Simpson (02-04) INTERTECH is a forward thinking Our industry changed dramatically in Sumitomo Electric Carbide, Inc. international conference planned to 1955-57 when the first repeatable be unique… and it remains so. The Joseph Tabeling (00-02) process was invented to create Delaware Diamond Knives, Inc. founders had a vision of bringing diamond in the laboratory. The rest of together the leading minds in the the world may have missed it when William J. Tully (03-05) world and having them gather at one you consider 1955 saw the first Diamond Abrasives Corporation venue to share their knowledge and nuclear sub, and in 1957 Dr. Albert Chris Winkel (02-04) explore the possibilities within this Sabin developed the Polio Vaccine, General Industrial Diamond Company industry. Each person who but the moment in time was not lost participates not only gains insight but on our industry. also shares their own perspective in PAST PRESIDENT order to reach new levels of Around the same time we saw cbn Daniel E. Herzog advancement. It is a fact that we are created and then many new products Wendt USA limited if we stay within our own followed year after year… realm of experience and knowledge. polycrystalline diamond, EXECUTIVE DIRECTOR To truly gain better ideas we need to polycrystalline cbn, polycrystalline see what is offered in related fields drilling products, polycrystalline wire Terry Kane and transfer that new idea, dies, large crystals, CVD diamond and Industrial Diamond Association many other variations coatings and P.O. Box 29460 accomplishment or application into Columbus, Ohio 43229 our own field of expertise. subcategories of a new arena we called Phone: 614-797-2265 INTERTECH provides that unique superabrasives and ultra-hard FAX: 614-797-2264 bridge into complementary fields. materials. Now we are even looking at the technology of information carried E-Mail: Whether we are involved with natural [email protected] or synthetic diamond, CVD Diamond, on the atom of a diamond and polycrystallines, single crystals, products harder than diamond itself. Website: www.superabrasives.org grinding, sawing, woodworking, wire Time and space are our limiting drawing, plating, optics or myriad factors and we are forging ahead with industrial applications, we can only new information along superhighways improve if we seek ideas outside our for this industry. Today’s message is FINER POINTS is the official publication of the limited vision. clear… INTERTECH is the gathering Industrial Diamond Association of America, Inc. and is published fours times a year. Contributions are A few years ago I saw a timeline that place for all those seeking knowledge welcomed but the Editor reserves the right to accept showed all scientific achievements and discussion regarding the successes or reject any material for publication. All by-lined over the course of history. The most of today, applications of tomorrow articles published in this magazine represent solely and materials of the future… See you the individual opinions of the writers and not impressive thing about this timeline necessarily those of the Industrial Diamond was the fact that the speed of new in Vancouver! Association. Executive and Editorial Offices: Finer developments has increased… no Points, P.O. Box 29460, Columbus, Ohio 43229, doubt due to the computer and (614) 797-2265. Editor and Advertising, Terry Kane. Sincerely, Advertising rates and deadlines available upon widespread access to information. No request. Copyright 2002. Material in FINER POINTS longer does a scientist have to spend may not be reproduced in any form without express days or months doing research over written consent. pages and pages of books… now André Spelbrink, President ISSN: 1090-0896 4 FINER POINTS 2003 Superabrasives Resource Directory REGISTER NOW! Make plans now to attend Intertech 2003 in Vancouver this July ... the location is breathtaking, the conference will be filled with advancements and new ideas, discussions will be though provoking and meaningful and the camaraderie will be unsurpassed. If you have not registered yet ... NOW IS THE TIME! Go to www.superabrasives.org for ease of Vancouver registration and details. See you in Vancouver! CHRISTIAN HULTNER Managing Director ELEMENT SIX Ltd., UK Christian Hultner (40) joined Element Six in September 2000 to succeed the late Chris Owers. Prior to this appointment, Christian has been the Group Managing Director of the Dietsmann Group, Monaco, a leader in maintenance services in the field of oil and gas drilling. His earlier career includes senior management positions with ABB Service Worldwide, Brussels, Belgium, the Landis & Gyr Group, Zug, Switzerland, and ABB Robotics, Brussels. The Swedish National has an MBA from Insead, Fontainebleu, France, and an MSc in Engineering Physics from Uppsala University, Sweden. He is married with one child and lives with his family in London. TANYA FRATTO Vice President and General Manager GE Superabrasives, USA Tanya was born on September 30, 1960, in Bay
Recommended publications
  • Total Drilling Solution – Main Catalog
    UKAM Industrial Superhard Tools Division of LEL Diamond Tools International, Inc. 28231 Avenue Crocker, Unit 80 Valencia, CA 91355 USA Phone: (661) 257-2288 Fax: (661) 257-3833 www.ukam.com TOTAL DRILLING SOLUTION – MAIN CATALOG DIAMOND DRILLS FROM .001” to 48” (.0254mm to 1219mm) UKAM Industrial Superhard Tools is a Leading Manufacturer a full range of Precision Diamond Core drills from .001" to 48" Diameter, drilling just about any type of material / application. Our products are used world wide in Industry, Research & Development, Contractor, & Hobby applications. Customers include some of the leading Fortune 500 companies, Military, Science & Space Organizations, Universities, R & D Organizations as well as Small Machine Shops. Diamond Drills are available from inventory in many different specifications, outside & inside diameters, drilling depths, bond types, diamond mesh sizes, mountings, & tolerances. We will work with you to determine your needs, and Why Buy Diamond Drills/Bits from UKAM Industrial Superhard Tools recommend the right solution for your specific material/application. You can count on us to improve • Huge Diamond Drill/Bit Variety • Immediate Worldwide Delivery you drilling operation to its ultimate efficiency. • Superior Quality & Consistency • Manufacturer Direct Prices • Best Value & Performance • Superior Technology & Innovation • Unmatched Technical Support • Purchase the Right Diamond Drill/Bit for your Needs the First Time INDUSTRIES USED IN: • Advanced Ceramics • Composites • Concrete • Glass • Quartz • Stone
    [Show full text]
  • Diamond Dressing Tools
    DIAMOND DRESSING TOOLS SiWe ringrazia thank Mr il sig.Ezio Ezio Ferrari Ferrari perfor hisla gentilecollaboration collaborazione catalogo_ENG_Utensili_diamantati_2020_catalogo ENG 24 pagine 25/05/2020 10:50 Pagina 1 Diamond dressing tools 3 18 DRESSING ABRASIVE HAND-SET MULTI-POINT GRINDING WHEELS DIAMOND DRESSING TOOLS MTT ROUND HEAD AND MTQ SQUARE HEAD 6 SINGLE-POINT DIAMOND DRESSING TOOLS 20 PBP MULTI-POINT GRIT IMPREGNATED DIAMOND DRESSING TOOLS 10 SINGLE-POINT DIAMOND CHISEL DRESSING TOOLS FOR PROFILE GRINDING 24 DIAMOND ROLLS FOR PROFILING AND DRESSING 12 ABRASIVE GRINDING WHEELS BLADE-TYPE MULTI-POINT AND POLYCRYSTALLINE DIAMOND DRESSERS 16 MULTI-POINT AND POLYCRYSTALLINE DIAMOND ROTARY DRESSERS catalogo_ENG_Utensili_diamantati_2020_catalogo ENG 24 pagine 25/05/2020 10:50 Pagina 2 2 catalogo_ENG_Utensili_diamantati_2020_catalogo ENG 24 pagine 25/05/2020 10:50 Pagina 3 DRESSING ABRASIVE GRINDING WHEELS DRESSING ABRASIVE GRINDING WHEELS GENERAL RECOMMENDATIONS In all grinding operations correct dressing is important in order to obtain FOR USE OF best grinding wheel performance and optimal processing parameters DIAMOND DRESSERS on the workpiece. Choose type, shape and size of the tool based on size and specification of the grinding wheel and application. DRESSING CONVENTIONAL GRINDING WHEELS Diamond carat weight must never be less than the recommended value. The dressing process of conventional abrasive and special microcrystalline Diamond must always be sharp. Aluminium Oxide wheels is carried out with: natural and polycrystalline single-point diamond dressers Single point diamond dressers have a blade-type hand set multi-point natural diamond dressers more aggressive action on the grain and blade-type polycrystalline diamond dressers are mostly recommended for profile multi-point and polycrystalline rotary diamond dressers wheels and for rough grinding wheels.
    [Show full text]
  • Getting the Most out of Your Diamond Tools
    UKAM Industrial Superhard Tools Division of LEL Diamond Tools International, Inc. 25345 Avenue Stanford, Unit 211 Valencia, CA 91355 USA Phone: (661) 257-2288 Fax: (661) 257-3833 www.ukam.com Getting the most out of your Diamond Tools Optimum diamond tool performance can be achieved through the proper use and basic care of your diamond tool, before and during its use. HOW DIAMOND TOOLS WORK This instruction manual has been written UKAM Industrial Superhard Tools manufactures tool help you get the most out of your precision diamond tools for a large variety of diamond tool investment. applications, materials, and industries In order to help you select the right Metal Bonded Diamond Tools are “impregnated” with diamond tool for your application, our diamonds. This means that selected diamonds are staff may ask you many questions about mixed and sintered with specific metal alloys to achieve the material you wish to machine. These the best cutting performance possible on any materials questions will specifically focus on: such as sapphire, glass, granite, tile and etc. The metal bond surrounding the diamonds must wear away to a.) material being machined continuously keep re-exposing the diamonds for the b.) how you plan to machine it diamond tool to continue cutting. c.) equipment you will be using If the tool becomes overheated, the metal bond does not wear away, instead it “glazes over” the diamond. d.) RPM of that machine Hence coating or covering the diamond. The metal bond then becomes the cutting agent rather than the e.) Coolants used diamond. Generating more heat.
    [Show full text]
  • Diamond Blade Overview
    DIAMOND BLADE OVERVIEW Variables in Cutting The segment is the part of the blade that actually does the cutting. A measured quantity of manufactured diamonds are mixed to- gether with a specific combination of powdered metals (the matrix) and processed in graphite molds at a high temperature and high pressure to form individual segments. • Diamond blades do not really cut, instead they grind through material. • The diamond crystals remove material by scratching out particles of hard, dense materials, or by knocking out larger particles of loosely bonded abrasive material. CONTINUOUS SMOOTH RIM • Provides clean, smooth cuts on: Glazed ceramic tile, marble, granite, porcelain and quarry tile • Wet and dry specs available • Sizes: 4" – 14" diameters SERRATED / TURBO RIM • Provides fast cutting with minimal chipping on: Roof tile, unglazed tile, masonry, brick, block, paver, stone and concrete • Dry specs (can be used with water) • Sizes: 4" – 16" diameters SEGMENTED RIM • Provides maximum life and cutting strength: Concrete, reinforced concrete, asphalt, masonry, brick, block, paver and stone • Wet and dry specs available • Sizes: 4" – 60" diameters 1 www.mkdiamond.com Training Manual WET & DRY CUTTING TYPES OF CUTTING • There are two basic types of cutting – dry or wet. • The best choice of blade depends upon: - the requirements of the job - the machine/tool utilizing the diamond blade - the preference of the operator DRY CUTTING DIAMOND BLADES Because of the overwhelming popularity of handheld saws, and the flexible nature of MK diamond blades to professionally handle most ceramic, masonry, stone and concrete materials, the dry cutting blade is very attractive. Dry cutting blades are also used where water is not permitted or not convenient or where so little cutting is required that set-up of water cooled equipment would be inefficient.
    [Show full text]
  • ADT Compiled Catalogue
    Product Catalog Salt Lake City, Utah USA (877) 974-0403 November 2015 Table of Contents Table of Contents CP3 Triple Tube Conversion………………..……………………………………………….…. B83 A. Bits CP3 Quadlatch Overshot……………………………………………………………………...… B85 Bit Introduction……………………………………………………………………..…. A1 Standard Core Bit Dimensions……………………………………………………… A2 NXB Core Barrel……………………………………………………………………….…….. B87 Impregnated…………………………………………………………………….…….. A3 NXB Quadlatch Overshot……………………………………………………………………..… B89 Surface Set………………………………………………………………………..….. A4 HXB Core Barrel……………………………………………………………………….…….. B91 Amdril PDC……………………………………………………………………….…… A5 HXB Quadlatch Overshot……………………………………………………………………..… B93 Reamer Shells………………………………………………………………..………. A6 Casing & Rod Shoes…………………………………………………………...……. A6 4-5/8x3.00 Core Barrel…………………………………………………………………….... B95 4-5/8x3.00 Quadlatch Overshot……………………………………………………………...… B97 5-3/4x4.00 Core Barrel…………………………………………………………………..….. B99 B. Wireline Core Barrels 5-3/4x4.00 Optional Equipment……………………………………………………………….… B101 Wireline Core Barrel Introduction……………………………………………………. B1 - B4 8 x 5-7/8 Core Barrel……………………………………………………………………..….. B103 8 x 5-7/8 Optional Equipment………………………………………………………………...… B105 NWL Core Barrel…………………………………………………….………………... B5 NWL Knuckle Head and Easy Lock Overshots………………………………………... B7 - B10 N2WL Core Barrel…………………………………………………………………….. B11 C. Conventional Core Barrels N2WL Knuckle Head and Easy Lock Overshots………………………………………. B13 - B16 Conventional Core Barrel Introduction…………………………………………………….. C1 - C2 N3WL
    [Show full text]
  • Technological Institute for Superhard and Novel Carbon Materials” (TISNCM)
    General information about Federal State Institution “Technological Institute for Superhard and Novel Carbon Materials” (TISNCM). The Institute was established in 1995 as the Scientific Technological Centre “Superhard Materials” (STC SHM). In 1998 the Institute was reorganized as the Federal State Institution “Technological Institute for Superhard and Novel Carbon Materials” (FSI TISNCM). FSI TISNCM is administrated by the Federal Agency of Science and Innovations of the Ministry of Education and Science of the Russian Federation. Scientific Research Departments at FSI TISNCM 1. Department of Structural Research • Laboratory of Spectral Research • Laboratory of Electron Microscopy 2. Department of New Superhard Material Synthesis • Laboratory of Nanostructured Metal-Carbon Materials 3. Department of Single Crystal Growth • Laboratory of Cubic Boron Nitride Synthesis • Laboratory of CVD Diamond Growth 4. Department of Physical Properties of Nanostructures • Laboratory of Gas and Thermal Treatment of Carbon Materials 5. Department of Physical and Mechanical Properties Research • Laboratory of Scanning Probe Microscopy • Laboratory of Physical and Chemical Measurements 6. Department of Scientific-Information Research of Superhard and Novel Carbon Materials 7. Department of Chemical Technologies and Nanomaterials 8. MIPT Department “Physics and Chemistry of Nanostructures” The subdivisions within the Institute are grouped in the following divisions: • FSI TISNCM Center of Collective Use (CCU) of Scientific Equipment “Research of Nanostructured,
    [Show full text]
  • Wood Grinding Tools the New Diamond Tool Series for Wood Grinding
    Wood grinding tools The new diamond tool series for wood grinding The SL-Series is a single layer diamond tool specifically developed for efficient initial grinding of wood. The tools works excellent on both in-door wooden floors and on out-door wooden terraces. The SL-series is perfect for leveling uneven floors and removing scratches, paint, oil and lacquer. After initial grinding with SL-series, we recommend you to go along using our range of sandpapers for a smooth and perfect end result. EZ SL 30 Wood - 30 grit Item no: 598887001 Quantity per box: 3 pcs The SL 30 Wood tool is a single layer diamond tool specifically developed for efficient initial grinding of wood. The tools works excellent on both in-door wooden floors and on out-door wooden terraces. The SL-series is perfect for leveling uneven floors and removing scratches, paint, oil and lacquer. After initial grinding with SL-series, we recommend you to go along using our range of sandpapers for a smooth and perfect end result. EZ SL 50 Wood - 50 grit Item no: 598887101 Quantity per box: 3 pcs The SL 50 Wood tool is a single layer diamond tool specifically developed for efficient initial grinding of wood. The tools works excellent on both in-door wooden floors and on out-door wooden terraces. The SL-series is perfect for leveling uneven floors and removing scratches, paint, oil and lacquer. After initial grinding with SL-series, we recommend you to go along using our range of sandpapers for a smooth and perfect end result.
    [Show full text]
  • DV Catalog Web2.Pdf
    Since 2003, Diamond Vantage has been serving the construction and stone industries with diamond tools that yield the highest level of performance. From its inception, Diamond Vantage has been working to become the BEST supplier to our customer by continuing to upgrade in all areas of our product line and customer services. We have our most exciting product lineup to date, and have included all our new products in this beautiful catalog. We have made great strides to make the catalog more useful than ever. Grades, bonds, and other specifications are all clearly presented for each product. Diamond Vantage diamond tools are used in all areas, from highways to bridges to buildings, and everywhere in-between. We continue to strive towards becoming the leader in diamond tool manufacturing by providing our customers with the BEST quality and service, exceeding industry expectations. Diamond Vantage manufactures a complete range of construction diamond tools designed for maximum performance. Such products include: flat saw blades, wall saw blades, hand saw blades, small diameter blades,diamond wire, cup wheels, core bits, specialty products and much more! TRUTH IN ENGINEERING What sets Diamond Vantage apart from most of its competition is that we are a true manufacturer. Unlike most of our competition, we manufacture 100% of the diamond tools we sell. - The result is quality, consistency, innovation, and competitive pricing. - Experienced product engineers for technical support and problem solving. - Manufacture a full range of diamond tools. - Engineered to reduce customer operating costs. TRUTH IN MARKETING - Extensive national sales & marketing support. - Complete sales support and training. TRUTH IN SOLUTIONS - Large inventory for quick turnaround.
    [Show full text]
  • Cutting Diamond Tools Using the Laser Microjet® Technology on a 5-Axis Machine
    Lasers in Manufacturing Conference 2015 Cutting diamond tools using the Laser MicroJet® technology on a 5-axis machine A. Richmann, S. Kurzen, B. Carron, B. Richerzhagen Synova SA, Chemin de la Dent d’Oche, 1024 Ecublens, Switzerland Abstract The Laser MicroJet® technology uses a water coupled ns-laser to cut various materials e.g. diamond, semiconductors, ceramics and metals. The laser light is guided to the workpiece by the water jet and the material is cut by the laser radiation. This technology can thus cut the same materials as a dry laser. However, the Laser MicroJet® technology exhibits several advantages over dry laser cutting such as a parallel sided kerf, less heat damage due to the additional cooling of the water, no adjustment of the laser focus and higher kerf depth to kerf width aspect ratios. The cutting of ultra-hard diamond tool materials with this technology is now showing very promising results in terms of low surface roughness and high cutting speed. PCD, PcBN, and single crystal diamond tool materials, including those backed with cemented tungsten carbide, can all be cut and shaped with the Laser MicroJet®. Latest results show a surface roughness Ra for the PCD/PcBN region of the cut surfaces of < 0.3 μm and < 0.5 μm on the cemented carbide. The effective cutting speed on 2 mm thick, carbide backed PCD/PcBN is 5 mm/min. The cutting edge radius (i.e. sharpness) achieved is r < 10 μm for PcBN samples and r < 5 μm for PCD or CVD samples. For some applications, this level of edge sharpness will be more than adequate and finish grinding will not be necessary.
    [Show full text]
  • Catalog: Yes Q No Q New Tool: ______Quote Quantity: ______Description: ______DRAWN BY: DISTRIBUTOR
    2018 F irst and foremost, we believe that Decatur Diamond currently offers the most complete suite of diamond cutting tools for the industrial market. We can provide both diamond coated and PCD Table of Contents milling cutters through the patented Ultra-Mill line. If your particular machining operation requires diamond coated, or grown on diamond, look no farther than our DIAbide series of solid carbide rounds with Ultra-Mill Patented Milling Cutting System .................4 diamond coating. We also design, manufacture and sell brazed-on, Ultra-Mill Index ..............................................................5 PCD tooling. Finally, Decatur Diamond can also offer you complex, DIAbide Tool Grade integrated shank, mono-bloc tooling that incorporates brazed- and Type Description ...................................................30 on, PCD diamond cutting surfaces. We are uniquely positioned DIAbide Index ..............................................................31 to offer customers such a broad range of diamond based cutting PCD Tipped Inserts .......................................................52 tools. Whether it is high silica content aluminum for the automotive PCD Tipped Inserts Index ............................................53 industry, multi-layer composites for aerospace, or any other difficult How to Order ...............................................................57 application, we have the diamond tooling solution for your machining challenge. However, our products are only a portion of the story. Decatur Diamond stands ready to work with you to solve your machining challenges, and provide on-going assistance with best-in-class technical and logistic support. Our field technical sales, our inside tech support and our customer service team stand ready to help our customers select the right diamond tool for the job, apply that tool for maximum productivity, and provide ongoing service and logistics support for our products.
    [Show full text]
  • Scio Diamond Technology Corp
    SCIO DIAMOND TECHNOLOGY CORP FORM 8-K (Current report filing) Filed 04/19/13 for the Period Ending 04/18/13 Address 411 UNIVERSITY RIDGE, SUITE D GREENVILLE, SC 29601 Telephone 864.346.2733 CIK 0001488934 Symbol SCIO SIC Code 3290 - Abrasive, Asbestos, And Miscellaneous Industry Constr. - Supplies & Fixtures Sector Capital Goods Fiscal Year 03/31 http://www.edgar-online.com © Copyright 2015, EDGAR Online, Inc. All Rights Reserved. Distribution and use of this document restricted under EDGAR Online, Inc. Terms of Use. UNITED STATES SECURITIES AND EXCHANGE COMMISSION WASHINGTON, D.C. 20549 FORM 8-K CURRENT REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 Date of Report: April 18, 2013 (Date of earliest event reported) SCIO DIAMOND TECHNOLOGY CORPORATION (Exact name of registrant as specified in its charter) Commission File Number: 333-166786 Nevada 45 -3849662 (State or other jurisdiction of incorporation) (IRS Employer Identification No.) 411 University Ridge Suite D Greenville, SC 29601 (Address of principal executive offices, including zip code) (864) 751-4880 (Registrant’s telephone number, including area code) Not Applicable (Former name or former address, if changed since last report) Check the appropriate box below if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions: Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425) Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12) Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b)) Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c)) Item 7.01 Regulation FD Disclosure.
    [Show full text]
  • Metal Bond Diamond and Cbn Products
    CONTINENTAL DIAMOND TOOL CORPORATION METAL BOND DIAMOND AND CBN PRODUCTS We’re setting the new standard. ABRASIVE STONES (DRESSING STICKS) GRIT DRESSER TOOLS Used on Resin and Metal Bonded Wheels to condition and true diamond and CBN. Remove metallic buildup, opening the bond for more aggressive cutting action. CDT Grit Dressers are tools having uniform diamond distributed in a tough matrix for long life and dependabil- ity. These ready to use tools have new diamond points exposed and are ready to yield a rapid, required finish. How to Use: Soak the stone in coolant or water for a brief time (approx. two minutes). If possible, Additionally, wheel truing and dressing is accomplished with maximum efficiency for more pieces per dress. reduce grinding wheels R.P.M.’s. This will help condition the wheel quicker and better. Grit dressers are the most economical way to dress grinding wheels. Superabrasive Dressing Stick Grit Size Aluminum Oxide Silicon Carbide Wheel Grit Size Recommended Grit Dresser application suggestions: 60 - 80 1/2 x 1/2 x 4 A150 1/2 x 1/2 x 4 C150 150 A220 C220 80 - 100 • Because of the large diamond section, dressing can be accomplished quickly. 100 - 120 A320 C320 120 - 140 •Normal tool infeed is .001" and can range up to .002" A600 C600 140 - 170 220 1/2 x 1/2 x 6 A150 1/2 x 1/2 x 6 C150 170 - 200 •Traverse rates can range from 12 IPM to 24 IPM and can go to 40 IPM where the only wheel requirement is A220 C220 200 - 230 stock removal.
    [Show full text]