– the Game of Test Cricket Part 5

Total Page:16

File Type:pdf, Size:1020Kb

– the Game of Test Cricket Part 5 24 LIFE NEWSPAPERS IN EDUCATION sunshinecoastdaily.com.au Thursday, November 23, 2017 Catch this THE Baggy Green is the nickname given to the capeach 4 cricketer in the Aussie side wears on their head. A baggy PART green cap has been a part of the Australian test cricket NiE uniform since the early twentieth century. TERMS EQUIPMENT REQUIRED LIKE all sports, the game of cricket has its own set OTHER than the on field equipment of of rules. Knowing these HOWZAT stumps and bails, there are a few pieces of terms will help you equipment required to play the game. understand the game. ■ A ball average, bowling - The The ball used in cricket is a cork ball total of runs scored off a covered in leather, weighing between 155.9g bowler in the period to – THE GAME OF TEST and 163g. The two most common colours of which the average refers, cricket balls are red – used in Test cricket divided by the number of and First Class cricket, and white – used in wickets he took in that One Day matches. period. A proficient ■ A bat bowler will aim for an CRICKET Bats used in cricket are made of flat wood, average of less than 30. and connected to a conical handle. They are hat trick - Three wickets not allowed to be longer than 96.5cm and taken in successive TODAY the first ball will be bowled in the 2017/18 Test series have to be less than 10.8cm wide. While balls. A bowler who has there is no standard weight, most bats taken two successive between Australia and England at the Gabba cricket ground range between 1.2kg and 1.4kg. wickets is said to be “on ■ Clothing a hat-trick”, and the in Brisbane. Get bowled over and catch some info about the Other than the traditional whites of a third ball is the 'hat-trick collared shirt with short or long trousers, ball. great game of cricket and upcoming Ashes Test series. head-wear eg caps and sun hats are over - a series of six allowed. Additionally, players wear spiked consecutive balls, shoes, in order to improve traction on the bowled from one end by playing area. one bowler. No-balls and Dressed in white ■ Protective equipment wides do not count as MARKED with grass stains, mud flecks and the red To protect themselves against the impact of part of an over, so a scuff of the cricket ball, why is the cricketer’s uniform the ball hitting the body, cricket players bowler who bowls one white? wear protective gear. A helmet, abdomen must bowl an extra ball - White clothing has been traditionally a part of the guard, batting gloves, leg pads, thigh to compensate. game of cricket since the 1800s. guards, arm guards and a chest guard all wide - a ball that passes - White is a symbol of purity and Test cricket is help prevent injury. so far from the batsman considered the purest and highest standard of the that he cannot hit it. A game. wide counts one run to - White clothing reflects heat better and can be more the batting side's score. comfortable to wear. Test cricket requires players to be on the field for up to five days, in the hot summer sun. - Test cricket is played with a red ball. Wearing white makes it easier to spot the ball. CHECK IT OUT Book to read AUTHOR Felice Arena tells a ripper of a tale in his book Sporty Kids: Cricket. It’s an exciting adventure of highs and lows with a wonderful underlying message of positivity and determination. Tom Jellett’s illustrations add to the humour and are a great accompaniment to the story, perfect for the younger readers. TOMORROW: Howzat – the game of Test cricket Part 5 RESTORE SIGHT FOR JUST $25 4 OUT OF 5 PEOPLE WHO ARE BLIND DON’T NEED TO BE DONATE NOW 1800 352352 HOLLOWS.ORG.AU.
Recommended publications
  • Tournament Rules Match Rules Net Run Rate
    Tournament Rules - Only employees nominated by member AMCs holding valid employment card shall be allowed to participate. - Organizing committee is providing all teams with 15 color kits. No one will be allowed to wear any other kit. Extra kits (on request) would cost PKR 2,000 per kit. Teams may give names of maximum 18 players. - The tournament will consist of 12 teams in total, divided in 2 groups with each team playing 5 group matches. - At the end of the league matches, top 2 teams from each group will qualify for the semi-finals. - Points shall be awarded on the following system: win/walkover (3pts), tie/washout (1pt), lost (0pts). - In case the points are equal, the team with better net run rate (NRR) will qualify for the semi- finals (the formula is given below). - The reporting time for the morning match will be 9:00am sharp (toss at 9:15am and match would start at 9:30am) and for the afternoon match the reporting time will be 1:00pm sharp (toss at 1:15pm and match would start at 1:30pm). - Walkover will be awarded in the event if a team (minimum of 7 players) fails to appear within 30 minutes of the scheduled time of the allotted time. - In the case of a tie in a knockout match, the result will be decided by a super-over. - The team's captain will have the responsibility of maintaining discipline and healthy atmosphere during the matches, any grievances should be brought to committee's notice by the captain only.
    [Show full text]
  • The Swing of a Cricket Ball
    SCIENCE BEHIND REVERSE SWING C.P.VINOD CSIR-National Chemical Laboratory Pune BACKGROUND INFORMATION • Swing bowling is a skill in cricket that bowlers use to get a batsmen out. • It involves bowling a ball in such a way that it curves or ‘swings’ in the air. • The process that causes this ball to swing can be explained through aerodynamics. Dynamics is the study of the cause of the motion and changes in motion Aerodynamics is a branch of Dynamics which studies the motion of air particularly when it interacts with a moving object There are basically four factors that govern swing of the cricket ball: Seam Asymmetry in ball due to uneven tear Speed Bowling Action Seam of cricket ball Asymmetry in ball due to uneven tear Cricket ball is made from a core of cork, which is layered with tightly wound string, and covered by a leather case with a slightly raised sewn seam Dimensions- Weight: 155.9 and 163.0 g 224 and 229 mm in circumference Speed Fast bowler between 130 to 160 KPH THE BOUNDARY LAYER • When a sphere travels through air, the air will be forced to negotiate a path around the ball • The Boundary Layer is defined as the small layer of air that is in contact with the surface of a projectile as it moves through the air • Initially the air that hits the front of the ball will stick to the ball and accelerate in order to obtain the balls velocity. • In doing so it applies pressure (Force) in the opposite direction to the balls velocity by NIII Law, this is known as a Drag Force.
    [Show full text]
  • Intramural Sports Indoor Cricket Rules
    Intramural Sports Indoor Cricket Rules NC State University Recreation uses a modified version of the Laws of Cricket as established by the World Indoor Cricket Federation. The rules listed below represent the most important aspects of the game with which to be familiar. University Recreation follows all rules and guidelines stated by the World Indoor Cricket Federation not stated below. Rule 1: The Pitch A. Indoor Cricket will be played on a basketball court. B. The pitch is the 10-yard-long strip between wickets. Lines will be painted on the pitch to denote specific areas of play (creases, wide ball, no ball lines). Refer to Figure 1 for specific dimensions. Figure 1. Cricket pitch dimensions 16” C. Boundaries will be denoted by the supervisor on site and agreed upon by both captains prior to the beginning of the match. D. The exclusion zone is an arc around the batting crease. No players are allowed in the exclusion zone until the batsman hits the ball or passes through the wickets. If a player enters the exclusion zone, a no ball will be called. Rule 2: Equipment A. Each batsman on the pitch must use a cricket bat provided by the team or Intramural Sports. B. Cricket balls will be provided by Intramural Sports. The umpires will evaluate the condition of the balls prior to the start of each match. These balls must be used for all Intramural Sport Tape Ball Cricket matches. C. Intramural Sports will provide (2) wickets, each consisting of three stumps and two bails to be used in every Intramural Sport Tape Ball Cricket match.
    [Show full text]
  • INVESTOR PRESENTATION the Future of Sport Has Arrived
    INVESTOR PRESENTATION The Future of Sport has Arrived October 2019 Commercial in Confidence This Investor Presentation is restricted to Sophisticated, Experienced and Professional Investors Global Sports Technology sector expected grow to be USD$31 billion by 2024. Sportcor is an Australian sporting technology company which integrates proprietary advanced electronics within traditional sports equipment and licenses the software and data rights globally. Secured a 5 year agreement with Kookaburra. Kookaburra launched their SmartBall with Sportcor electronics in August at the Ashes this year. Investment In agreement negotiations with Gray Nicolls Sports to embed the Sportcor electronics within the broad GNS product range: Steeden rugby league ball, Highlights cricket, hockey, water polo, netball, soccer, clothing, shoes and headgear. First mover advantage on Sportcor’s movement sensor technology, ready to accelerate to capitalise on this growing trend in sport globally. An independently tested and working product which can be applied to multiple sporting goods and wearables. Board of Directors chaired by Michael Kasprowicz (former Australian cricketer and currently a Cricket Australia Board Member, with a strong global network of athletes and administrators), and an experienced management team to drive growth. Commercial in Confidence 2 What is Sportcor Commercial in Confidence Demand for performance & engagement Fans Players are thirsty for want to next level optimise engagement, performance immersion and and training excitement Broadcasters are demanding new competitive content, in new formats, to elevate digital and broadcast audiences Commercial in in Confidence Confidence 4 Sportcor is a sports technology company powering data-driven sports engagement. Sportcor integrates its proprietary, Sportcor powers smart advanced electronics with traditional sporting goods sports equipment produced by leading global sport manufacturers.
    [Show full text]
  • Design of Neck Protection Guards for Cricket Helmets
    Design of Neck Protection Guards for Cricket Helmets T. Y. Pang a and P. Dabnichki School of Engineering, RMIT University, Bundoora Campus East, Bundoora VIC 3083, Australia Keywords: Cricket, Helmet, Neck, Guard, Design. Abstract: Cricket helmet safeguards have come under scrutiny due to the lack of protection at the basal skull and neck region, which resulted in the fatal injury of one Australian cricketer in 2014. Current cricket helmet design has a number of shortcomings, the major one being the lack of a neck guard. This paper introduces a novel neck protection guard that provides protection to a cricket helmet wearer’s head and neck, without restricting head movements and obstructing the airflow, but achieving a minimal weight. Adopting an engineering design approach, the concept was generated using computer aided design software. The design was performed through several iterative processes to achieve an optimal solution. A prototype was then created using rapid prototyping technology and tested experimentally to meet the objectives and design constraints. The experimental results showed that the novel neck protection guard reduced by more than 50% the head acceleration values in the drop test in accordance to Australian Standard AS/NZS 4499.1-3:1997 protective headgear for cricket. Further experimental and computer simulation analysis are recommended to select suitable materials for the neck guards with satisfactory levels of protection and impact-attenuation capabilities for users. 1 INTRODUCTION head and facial injuries (Ranson et al. 2013). Stretch (2000) conducted an experiment on six different Cricket helmets were introduced into the sport to helmets with different features and materials at three protect the head and face of batsman when a bowler different locations.
    [Show full text]
  • Bowling Performance Assessed with a Smart Cricket Ball: a Novel Way of Profiling Bowlers †
    Proceedings Bowling Performance Assessed with a Smart Cricket Ball: A Novel Way of Profiling Bowlers † Franz Konstantin Fuss 1,*, Batdelger Doljin 1 and René E. D. Ferdinands 2 1 Smart Products Engineering Program, Centre for Design Innovation, Swinburne University of Technology, Melbourne 3122, Australia; [email protected] 2 Department of Exercise and Sports Science, Faculty of Health Sciences, University of Sydney, Sydney 2141, Australia; [email protected] * Correspondence: [email protected]; Tel.: +61-3-9214-6882 † Presented at the 13th conference of the International Sports Engineering Association, Online, 22–26 June 2020. Published: 15 June 2020 Abstract: Profiling of spin bowlers is currently based on the assessment of translational velocity and spin rate (angular velocity). If two spin bowlers impart the same spin rate on the ball, but bowler A generates more spin rate than bowler B, then bowler A has a higher chance to be drafted, although bowler B has the potential to achieve the same spin rate, if the losses are minimized (e.g., by optimizing the bowler’s kinematics through training). We used a smart cricket ball for determining the spin rate and torque imparted on the ball at a high sampling frequency. The ratio of peak torque to maximum spin rate times 100 was used for determining the ‘spin bowling potential’. A ratio of greater than 1 has more potential to improve the spin rate. The spin bowling potential ranged from 0.77 to 1.42. Comparatively, the bowling potential in fast bowlers ranged from 1.46 to 1.95. Keywords: cricket; smart cricket ball; profiling; performance; skill; spin rate; torque; bowling potential 1.
    [Show full text]
  • Cricket Cat for Email.Qxd:Layout 1
    cricket 2011 www.gray-nicolls.co.uk Station Road, Robertsbridge, East Sussex, TN32 5DH, England. Tel: +44 (0) 1580 880357 Fax: +44 (0) 1580 881156 e-mail: [email protected] www.gray-nicolls.co.uk where tradition meets innovation The players you see on the international stage in number of the world’s elite and we are proud that matched only by the skill and ability of the playing alongside this elite group and like them, 2011 are true authorities on all our equipment. so many of them trust their game with us. The Internationals and top players who choose to use you can be secure in the knowledge that you are Gray-Nicolls provides the power to an impressive quality of our bats and associated products is them. When you select a Gray-Nicolls bat, you are using a bat manufactured by the best. the best use the best Unique to the industry, Gray-Nicolls grows only the best English willow Since 1876 Gray-Nicolls have continued to manufacture cricket bats 2007 saw the launch of the ground-breaking Fusion handle. This Every Gray-Nicolls bat is made, hand finished and rigorously tested for the production of their cricket bats. Salix Caerulea or Alba Var to the very highest quality, in Robertsbridge, England. totally hollow carbon handle dramatically reduced the weight of the by our “Master Bat Makers”. varieties are grown and harvested by the Company in a willow bat allowing huge edges and a massive profile never seen before. Gray-Nicolls superior handle technology dates back to the ultra Gray-Nicolls is proud of its traditional Hand Crafted cricket bats replenishment programme pioneered over 50 years ago.
    [Show full text]
  • Summary Guide to Scoring
    SUMMARY GUIDE TO SCORING Wickets In the bowler’s analysis, if the method of dismissal is one that the bowler gets credit for (see the Wickets ready reckoner), As bowlers progress through their overs, you must keep a progressive total of their runs, sundries and wickets. mark a red X in the analysis (or blue or black if you don’t have a red pen). Over 1 6 runs scored = 0-6 Over 2 7 runs scored = 6+7 = 0-13 Partnership details Over 3 5 runs scored = 13+5 = 0-18 Partnership details are required at the fall of a wicket to assist in maintaining club records. You should record at least: Over 4 Maiden (no runs) = 18+0 = M1 Over 5 1 wicket and 3 runs = 18+3 =1-21 z team total at the fall of wicket z out batter’s name Sundries ready reckoner z not out batter’s name and current score Bye (b) Leg bye (L) Wide (W) No ball ( ) z total runs scored by that partnership. Counted as run to batter No No No No Counted as ball faced Yes Yes No Yes Wickets ready reckoner Counted on total score Yes Yes Yes Yes Counted as run against bowler No No Yes Yes How out Credited Bowler’s Out off no Counted as legal delivery Yes Yes No No column to bowler? analysis ball? Rebowled No No Yes Yes Bowled bowled Yes X No Caught ct. fielder’s name Yes X No Byes LBW lbw Yes X No 1, 2 3 4 If batters run byes, they are recorded (depending on how many) in the Byes section and on the score.
    [Show full text]
  • Evolution of Test Cricket in Last Six Decades a Univariate Time Series Analysis
    Evolution of Test Cricket in Last Six Decades A Univariate Time Series Analysis Mayank Nagpal Sumit Mishra 1 Introduction We intend to analyse the structural changes in the average annual run-rate, i.e., how many runs are scored in each over, a measure of how much bat dominates the ball or how aggressively teams bat. Test cricket is the traditional format of the game. It is considered to be a snail-form of the game when we compare it with newer versions of the game, viz, ODI and T20 .A test cricket match lasting 5 days is apparently a lot less exciting for some than an ODI which lasts for eight hours or a T20 match which is matter of two-three hours. The general view is that with the advent of new technology, pitches that are more batsmen-friendly and craving for result in each game, the average run rate seems to have increased. Some analysts attribute this change to the emergence of newer formats and other innovations in the game. The question we are trying to answer is about whether these factors like those mentioned below had any significant impact on the game. The events whose effect we like to capture are: • Advent of One Day International(ODI):With dying popularity of test cricket matches during 1960s,a tournament called Gillette Cup was played in 1963 in England. The cup had sixty- five overs a side matches. This tourney was a knockout one and it became quite popular and laid foundation for a sleeker format of the game known as ODI-fifty overs a side game.
    [Show full text]
  • CRICKET BATTING GLOVES P R O D U C T S
    +91-8048405501 B. D. Mahajan & Sons Private Limited https://www.bdmcricket.net/ We are engaged in manufacturing, supplying, and exporting premium array of Cricket Equipment such as Cricket Bat, Cricket Ball and Cricket Batting Pad and many more. About Us We were set up in the year 1986 as B. D. Mahajan & Sons Private Limited, are committed to manufacturing, supplying, and exporting a huge array of Cricket Equipment such as Cricket Bat, Cricket Ball and Cricket Batting Pad and many more. We source the raw materials from reputed and trustworthy vendors to ensure immaculate standards of quality. We are diligently supported by teams of adept technicians, managers, and executives who work meticulously for achieving new milestones of product excellence. Our up to date production facilities are highly equipped with cutting edge machines and we use modern technologies to carry out seamless production. Our strong desire to offer the finest quality cricket accessories to our valued clients has established us as reputed organization that is driven by quality and client satisfaction. BDM range of Cricket Bats and Cricket Accessories have been used by renowned cricketers for more than 8 decades and these are recognized as trend setters. We constantly upgrade our products by keeping pace with the new trends and changing requirements of cricketers. We use state of the art technologies to produce wide array of cricket accessories by maintaining rigorous norms of quality in adherence to well defined standards of the industry. We have a robust infrastructure that is well equipped with high-tech machines and facilities and we have divided our works into various divisions for streamlining of different..
    [Show full text]
  • ACL Knock out Rules
    ACL Knock Out Rules 1. All matches will be played with the ACL approved "Hard Tennis" cricket balls that are provided by ACL. The games will be played as per the MCC Laws of Cricket with some exceptions. The exceptions and other tournament rules are as follows: The tournament will be played as a knockout game. 2. Each game shall be played between two teams of 11 players each. 3. Each game shall have a maximum of TWELVE 6-ball overs per inning. 4. Minimum 5 bowlers should be used in the game. Only 2 Bowlers can bowl a maximum of 3 overs. 5. The overs shall all be bowled from one end of the pitch, as determined by the umpires. 6. There will be no LBWs. However, leg byes will be permitted as long as there is no deliberate padding by the batsman – umpires call is final. 7. Each team will be permitted to register a maximum of 15 players (15 allowed as per standard roster plus up to max 3 more players by paying $20 per player), although only 11 can bat or bowl in any one game. All 15 players should be registered and should have signed the waiver form and should not have played in any other team in this tournament. The teams should submit the playing 11 at the beginning of the match. However, a team can get individual trophy for max 15 players. 8. To play in semifinal or final, a player should have played (in playing 11) minimum 1 match in earlier rounds (QF or earlier rounds) this applies for substitute player too.
    [Show full text]
  • Wasted Catch: Unsolved Problems in U.S. Fisheries
    © Brian Skerry WASTED CATCH: UNSOLVED PROBLEMS IN U.S. FISHERIES Authors: Amanda Keledjian, Gib Brogan, Beth Lowell, Jon Warrenchuk, Ben Enticknap, Geoff Shester, Michael Hirshfield and Dominique Cano-Stocco CORRECTION: This report referenced a bycatch rate of 40% as determined by Davies et al. 2009, however that calculation used a broader definition of bycatch than is standard. According to bycatch as defined in this report and elsewhere, the most recent analyses show a rate of approximately 10% (Zeller et al. 2017; FAO 2018). © Brian Skerry ACCORDING TO SOME ESTIMATES, GLOBAL BYCATCH MAY AMOUNT TO 40 PERCENT OF THE WORLD’S CATCH, TOTALING 63 BILLION POUNDS PER YEAR CORRECTION: This report referenced a bycatch rate of 40% as determined by Davies et al. 2009, however that calculation used a broader definition of bycatch than is standard. According to bycatch as defined in this report and elsewhere, the most recent analyses show a rate of approximately 10% (Zeller et al. 2017; FAO 2018). CONTENTS 05 Executive Summary 06 Quick Facts 06 What Is Bycatch? 08 Bycatch Is An Undocumented Problem 10 Bycatch Occurs Every Day In The U.S. 15 Notable Progress, But No Solution 26 Nine Dirty Fisheries 37 National Policies To Minimize Bycatch 39 Recommendations 39 Conclusion 40 Oceana Reducing Bycatch: A Timeline 42 References ACKNOWLEDGEMENTS The authors would like to thank Jennifer Hueting and In-House Creative for graphic design and the following individuals for their contributions during the development and review of this report: Eric Bilsky, Dustin Cranor, Mike LeVine, Susan Murray, Jackie Savitz, Amelia Vorpahl, Sara Young and Beckie Zisser.
    [Show full text]