Models: Fbr-1V1drm-Rx-Mini

A&E Specification Form FBR-1V1DRM-MINI

MODELS: FBR-1V1DRM-RX-MINI FBR-1V1DRM-TX-MINI

TECHNICAL SPECIFICATIONS Page 1 DIVISION – LEVEL 1___ 28 ELECTRONIC SAFETY AND SECURITY LEVEL 2___28 20 00 ELECTRONIC SURVEILLANCE LEVEL 3___28 23 00 VIDEO SURVEILLANCE LEVEL 3___28 23 19 DIGITAL VIDEO RECORDERS AND ANALOG RECORDING DEVICES

1 GENERAL

A. Equipment materials and components shall be available for purchase from the product manufacturer as standard replacement parts while the product is commercially available from the manufacturer.

B. Product shall be thoroughly tested and operationally proven by the manufacturer prior to sale or installation.

C. Online or phone support services shall be supplied by the manufacturer to provide information or assistance in product use, installation, and configuration.

D. Products proven defective in materials or workmanship during the stated period of warranty shall be repaired or replaced by the manufacturer without additional charge.

2 PRODUCTS

A. The fiber transmitter and receiver shall provide the ability to transmit one video channel, and one reverse data channel. The transmitter and receiver shall also be available in multimode and single-mode versions. When using single-mode fiber, the transmitter and receiver shall offer an exceptional optical power budget of 23 dB and shall provide a transmission distance of up to 60km.

B. The fiber transmitter and receiver shall be Hot-Swappable in rack, have a nominal input voltage of 12VDC, and input current of 250mA, and have a MTBF of or greater than 100,000 hours.

C. The fiber transmitter and receiver shall meet or exceed the following design and performance specifications:

FBR-1V1DRM-MINI Series Specifications

1. VIDEO a. Number of Forward Video Channels 1 b. Type of Video Transmission Over Fiber Digital c. Number of Sample Bits 8 d. Gain Adjustment (Manual/Auto/None) None e. Video Bandwidth 10 Hz - 6.5 MHz f. Video Signal-to-Noise Ratio (SNR) 60 dB

2. DATA a. Number of Forward Data Channels 0 b. Number of Reverse Data Channels 1 c. Data Interface RS-422/RS-485 (2 wire) d. Operation Mode DIP-Switch Selectable e. Data Rate DC-115 kbps (NRZ)

3. FIBER MULTIMODE a. Number of Fibers Required 1 Multi-Mode

AventuraCCTV.com Tel: 1-631-300-4000 Fax: 1-631-434-7000 A&E Specification Form FBR-1V1DRM-MINI

b. Type of Fiber Multi-mode c. Type of Optical Connector ST d. Wavelengths Used (Fwd./Rvrs.) 850/1310 nm e. Optical Power Budget 13 dB f. Maximum Distance (miles (km) 2 miles / 3.2 km

4. ELECTRICAL Page 2 a. Nominal Input Voltage 12 VDC b. Input Current @ Nominal Input Voltage 250 mA c. Hot-Swappable in Rack (Yes/No) Yes

5. INDICATORS a. Indicators Power, Link, Video

6. MECHANICAL a. Overall Size 3.5" x 2.5" x 1" b. Unit Weight 1.5 lb/0.7 kg

7. ENVIRONMENTAL a. Operating Temperature -40oC to +75oC b. Storage Temperature -40oC to +85oC c. Relative Humidity 0% to 95% non-condensing d. MTBF (hours) > 100,000 hours

8. COMPLIANCE a. Safety Standards Unit Complies With UL/EN60950-1 b. EMC Standards Unit Complies With FCC part 15, EN55022, EN55024, EN50130-4 c. Laser Standards Unit Complies With FDA Performance Standard for Laser Products, Title 21, Code of Federal Regulations, Subchapter J d. CE Mark (Yes/No) Yes

FBR-1V1DRM-MINI Series Model Numbers

1. FBR-1V1DRM-RX-MINI 1 Channel Video, 1 Channel Bi-Directional Data over a single fiber (multimode) (mini receiver) 2. FBR-1V1DRM-TX-MINI 1 Channel Video, 1 Channel Bi-Directional Data over a single fiber (multimode) (mini transmitter)

AventuraCCTV.com Tel: 1-631-300-4000 Fax: 1-631-434-7000