Corrosion Resistant Composite Doors

SECTION 08230 CORROSION RESISTANT COMPOSITE DOORS

Display hidden notes to specifier. (Don't know how? Click Here)

PART 1 GENERAL

1.1 SECTION INCLUDES

1.A. Corrosion Resistant Composite Doors.

1.B. Corrosion Resistant Composite Fire Doors.

1.C. Corrosion Resistant Aluminum Frames.

1.D. Corrosion Resistant Fiberglass Frames.

1.2 RELATED SECTIONS

2.A. Section 04810 - Unit Masonry Assemblies: Prepared opening in masonry.

2.B. Section 05500 - Metal Fabrications: Steel opening frame.

2.C. Section 06114 - Wood Blocking and Curbing: Rough wood framing for door opening.

2.D. Section 08710 - Door Hardware: Product Requirements for cylinder core and keys.

2.E. Section 09900 - Painting: Field applied finish.

2.F. Section 16130 - Raceway and Boxes: Conduit from electric circuit to door operator.

2.G. Section 16150 - Wiring Connections: Power to disconnect.

1.3 REFERENCES

3.A. NFPA 252 - Standard Methods of Fire Tests for Door Assemblies; 1995.

3.B. UL 10B - Standard for Fire Tests of Door Assemblies; 1997.

08230-1 3.C. UL 10C - Positive Pressure Fire Tests of Door Assemblies.

3.D. Listed by Warnock Hersey International Inc.

1.4 DESIGN / PERFORMANCE REQUIREMENTS

4.A. Fire Rated Doors: 4.A.1. Doors shall be tested in accordance with UL 10B, "Fire Tests of Door Assemblies", NFPA 252, "Fire Tests of Door Assemblies", and UL 10C, "Positive Pressure Fire Tests of Door Assemblies". 4.A.2. Doors must have an approved marking or physical label, applied by an authorized facility, in accordance with the procedure set forth by an independent certification agency.

4.B. Stairwell Doors shall have a 250 degree F temperature rise rating (30 minute fire test duration.) The fire label on the door shall indicate the specific hourly rating.

1.5 SUBMITTALS

5.A. Submit under provisions of Section 01300.

5.B. Product Data: Manufacturer's data sheets on each product to be used, including: 5.B.1. Preparation instructions and recommendations. 5.B.2. Storage and handling requirements and recommendations. 5.B.3. Installation methods. 5.B.4. Operation and maintenance data.

5.C. Shop Drawings: Show fabrication and installation details; include door elevations, head, jamb, and meeting stile details including full or partial gaskets.

5.D. LEED Submittals: Provide documentation of how the requirements of Credit will be met: 5.D.1. Product Data for Credit MR 2.1 and 2.2: For products being recycled, documentation of total weight of project waste diverted from landfill. 5.D.2. Product Data for Credit MR 4.1 and MR 4.2: For products having recycled content, documentation including percentages by weight of post consumer and preconsumer recycled content 5.D.2.a. Include statement indicating costs for each product having recycled content. 5.D.3. Product Data for Credit MR 5.1 and Credit MR 5.2: Submit data, including location and distance from Project of material manufacturer and point of extraction, harvest or recovery for main raw material. 5.D.3.a. Include statement indicating cost for each regional material and the fraction by weight that is considered regional.

08230-2 5.E. Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.

5.F. Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.

5.G. Manufacturer's Certificates: Certify products meet or exceed specified requirements.

5.H. Closeout Submittals: Provide manufacturer's maintenance instructions that include recommendations for periodic checking and adjustment of cable tension and periodic cleaning and maintenance of all railing and infill components.

1.6 QUALITY ASSURANCE

6.A. Manufacturer Qualifications: Minimum five years documented experience manufacturing products specified this Section.

6.B. Installer Qualifications: Minimum five years documented experience installing products specified this Section.

6.C. Mock-Up: Provide a mock-up for evaluation of surface preparation techniques and application workmanship. 6.C.1. Finish areas designated by Architect. 6.C.2. Do not proceed with remaining work until workmanship, color, and sheen are approved by Architect. 6.C.3. Refinish mock-up area as required to produce acceptable work.

1.7 DELIVERY, STORAGE, AND HANDLING

7.A. Store products in manufacturer's unopened packaging until ready for installation. Do not lay flat.

7.B. Store products in clean, dry area indoors until ready for installation. Store materials in accordance with manufacturer's instructions.

7.C. Protect materials and finish from damage during handling and installation.

1.8 PROJECT CONDITIONS

8.A. Maintain environmental conditions (temperature, humidity, and ventilation) within limits recommended by manufacturer for optimum results. Do not install products under environmental conditions outside manufacturer's absolute limits.

8.B. Verify actual openings by field measurements before fabrication; show recorded measurements on shop drawings.

8.C. 08230-3 Coordinate field measurements and fabrication schedule with construction progress to avoid construction delays.

1.9 WARRANTY

9.A. Provide manufacturer's standard two-year warranty that products are free of defects in material and workmanship and guaranteeing to replace (exclusive of freight and labor) parts proven defective within two years after date of shipment to purchaser.

PART 2 PRODUCTS

2.1 MANUFACTURERS

1.A. Acceptable Manufacturer: Eliason Corp., Easy Swing Door Div., which is located at: 9229 Shaver Rd. ; Kalamazoo, MI 49024; Toll Free Tel: 800-828-3655; Tel: 269-327-7003; Fax: 800- 828-3577; Email: request info ([email protected]); Web: www.eliasoncorp.com

1.B. Substitutions: Not permitted.

1.C. Requests for substitutions will be considered in accordance with provisions of Section 01600.

2.2 CORROSION RESISTANT COMPOSITE DOORS

2.A. Flush Corrosion Resistant Doors: FRP-17 (SL-17) Flush Corrosion Resistant Doors are constructed using an extruded aluminum style and rail internal frame system with Pebble Grain texture face sheets rabbited into integral reglets of stiles and rails. Core is non-CFC urethane foam with a minimum five pounds per cubic foot density that is bonded to the outer door shells. Overall panel thickness is 1-7/8 inches with an "R" factor of 12.18. 2.A.1. Features: Provide with the following optional features: 2.A.1.a. Sealed seams. 2.A.1.b. Closed top and bottom rails. 2.A.1.c. Foam-filled stiles and rails. 2.A.2. FRP Facing 0.120 inch thick Sandstone-Textured FRP face sheets available in a variety of colors. 2.A.3. FRP Facing Color: 2.A.3.a. Molded Color: _____ 2.A.3.b. Molded Color as Selected from the manufacturer's standard selections. 2.A.3.c. Custom Color. 2.A.4. Aluminum Stile and Rail Finish: Class 1 (0.7 mil) anodized. 2.A.5. Vision Light Options: 2.A.5.a. Glazing: 2.A.5.a.1) 08230-4 1/4 inch (6.4 mm) safety glass. 2.A.5.a.2) 1/2 inch (13 mm) safety glass. 2.A.5.a.3) 1 inch (25 mm) insulated safety glass. 2.A.5.a.4) 1 inch (25 mm) insulated safety glass with internal muntins. 2.A.5.b. Muntins: Aluminum surface-applied. 2.A.5.b.1) 1/2 inch (13 mm) width. 2.A.5.b.2) 1-1/4 inch (32 mm) width. 2.A.6. Louvers: Louver units are inverted "Y" type fixed vane type. Vanes are secured by rivets around the outside of the frame, inaccessible and hidden from view. 2.A.6.a. Free air space is 50 percent of louver area. 2.A.6.b. Size: As indicated on the Drawings. 2.A.7. Security Grate: Security Grate fabricated using a 1 inch by 1 inch by 1/8 inch (25 mm by 25 mm by 3.2 mm) steel angle perimeter frame and metal mesh. 2.A.8. Vandal Screen: Vandal Screen is fabricated with a stainless steel mesh in an anodized or painted aluminum frame fastened to the door with self-retaining, tamper-proof, pin-torx fasteners. Mesh screen is matte black, powder-coated stainless steel, round-hole mesh screen with a 63 percent open area. 2.A.9. Bottom Brush: Adjustable bottom brush with two nylon bristle brushes to create a weather-tight seal. Two adjustment screws at the hinge stile side of the door allow either side or both sides of the brush insert to be moved from .15 inch (3.8 mm) and extended to .74 inch (18.8mm). 2.A.10. Bi-Fold Unit: Panels fold out of opening and attach securely to each other and the door magnetically. Four cam-locks secure the bi-fold in the closed position. 2.A.10.a. Provide with insect and vandal screen. 2.A.10.b. Provide with insect and security grate. 2.A.11. Threshold: Extruded aluminum fabricated to fit jamb to jamb and provided with threshold clips. 2.A.11.a. Size/Style : 2.A.11.a.1) THRS-1 - Flat 1/2 inch by 4 inches (12.7 mm by 102 mm). 2.A.11.a.2) THRS-2 - Flat 1/2 inch by 5 inches (12.7 mm by 127 mm). 2.A.11.a.3) THRS-5 - Flat 1/4 inch by 5 inches (12.7 mm by 127 mm). 2.A.11.a.4) THRS-6 - Latch Track 1/4 inch by 5 inches (12.7 mm by 127 mm). 2.A.11.a.5) THRS-4 - Flat 1/2 inch by 7 inches (12.7 mm by 178 mm). 2.A.12. Door Pulls and Push Bars as Durable as Our Doors: Extruded aluminum designed to visually complement our door and framing products. Anodized finishes is Class 1 (0.7 mil/.018 mm) standard. 2.A.12.a. SL-150 Gooseneck Fluted Push Bar 2.A.12.b. 08230-5 SL-100 Surface-Mounted Door Pull. 2.A.12.c. SL-100 Surface-Mounted Door Pull with cylinder hole when used with an exit device. 2.A.13. Astragals: Provide Astragals designed to cover the clearance gap between door pairs, act as a weather seal, minimize noise, reduce smoke infiltration in case of a fire, and increase energy-efficiency of the entrance. 2.A.13.a. Pile weather seal 2.A.13.b. Vinyl weather seal 2.A.13.c. Special-Lite Astragals for doors with a radius stile or a bevel stile.

2.B. Panel Style Corrosion Resistant Doors: AMP-18 (SL-18) Colonial Doors, 6-panel style with wood grain. Corrosion Resistant Doors are constructed using an extruded aluminum style and rail internal frame system with face sheets rabbited into integral reglets of stiles and rails. Core is non-CFC urethane foam with a minimum five pounds per cubic foot density that is bonded to the outer door shells. Overall panel thickness is 1-7/8 inches with an "R" factor of 12.18. 2.B.1. Features: Provide with the following optional features: 2.B.1.a. Sealed seams. 2.B.1.b. Closed top and bottom rails. 2.B.1.c. Foam-filled stiles and rails. 2.B.2. AMP Facing 0.120 inch thick wood grain acrylic modified polyester face sheets available in a variety of colors. 2.B.3. FRP Facing Color: 2.B.3.a. Wood Stain Color: _____ 2.B.3.b. Wood Stain as Selected from the manufacturer's standard selections. 2.B.3.c. Kynar Color: ______. 2.B.3.d. Kynar Color as Selected from the manufacturer's standard selections. 2.B.3.e. Custom Kynar Color. 2.B.4. Aluminum Stile and Rail Finish: Class 1 (0.7 mil) anodized. 2.B.5. Vision Light Options: 2.B.5.a. Glazing: 2.B.5.a.1) 1/4 inch (6.4 mm) safety glass. 2.B.5.a.2) 1/2 inch (13 mm) safety glass. 2.B.5.a.3) 1 inch (25 mm) insulated safety glass. 2.B.5.a.4) 1 inch (25 mm) insulated safety glass with internal muntins. 2.B.5.b. Muntins: Aluminum surface-applied. 2.B.5.b.1) 1/2 inch (13 mm) width. 08230-6 2.B.5.b.2) 1-1/4 inch (32 mm) width. 2.B.6. Louvers: Louver units are inverted "Y" type fixed vane type. Vanes are secured by rivets around the outside of the frame, inaccessible and hidden from view. 2.B.6.a. Free air space is 50 percent of louver area. 2.B.6.b. Size: As indicated on the Drawings. 2.B.7. Security Grate: Security Grate fabricated using a 1 inch by 1 inch by 1/8 inch (25 mm by 25 mm by 3.2 mm) steel angle perimeter frame and metal mesh. 2.B.8. Vandal Screen: Vandal Screen is fabricated with a stainless steel mesh in an anodized or painted aluminum frame fastened to the door with self-retaining, tamper-proof, pin-torx fasteners. Mesh screen is matte black, powder-coated stainless steel, round-hole mesh screen with a 63 percent open area. 2.B.9. Bottom Brush: Adjustable bottom brush with two nylon bristle brushes to create a weather-tight seal. Two adjustment screws at the hinge stile side of the door allow either side or both sides of the brush insert to be moved from .15 inch (3.8 mm) and extended to .74 inch (18.8mm). 2.B.10. Bi-Fold Unit: Panels fold out of opening and attach securely to each other and the door magnetically. Four cam-locks secure the bi-fold in the closed position. 2.B.10.a. Provide with insect and vandal screen. 2.B.10.b. Provide with insect and security grate. 2.B.11. Threshold: Extruded aluminum fabricated to fit jamb to jamb and provided with threshold clips. 2.B.11.a. Size/Style : 2.B.11.a.1) THRS-1 - Flat 1/2 inch by 4 inches (12.7 mm by 102 mm). 2.B.11.a.2) THRS-2 - Flat 1/2 inch by 5 inches (12.7 mm by 127 mm). 2.B.11.a.3) THRS-5 - Flat 1/4 inch by 5 inches (12.7 mm by 127 mm). 2.B.11.a.4) THRS-6 - Latch Track 1/4 inch by 5 inches (12.7 mm by 127 mm). 2.B.11.a.5) THRS-4 - Flat 1/2 inch by 7 inches (12.7 mm by 178 mm). 2.B.12. Door Pulls and Push Bars as Durable as Our Doors: Extruded aluminum designed to visually complement our door and framing products. Anodized finishes is Class 1 (0.7 mil/.018 mm) standard. 2.B.12.a. SL-150 Gooseneck Fluted Push Bar 2.B.12.b. SL-100 Surface-Mounted Door Pull. 2.B.12.c. SL-100 Surface-Mounted Door Pull with cylinder hole when used with an exit device. 2.B.13. Astragals: Provide Astragals designed to cover the clearance gap between door pairs, act as a weather seal, minimize noise, reduce smoke infiltration in case of a fire, and increase energy-efficiency of the entrance. 2.B.13.a. Pile weather seal 2.B.13.b. 08230-7 Vinyl weather seal 2.B.13.c. Special-Lite Astragals for doors with a radius stile or a bevel stile.

2.C. Wood Grain Corrosion Resistant Entry Doors: AMP-19 (SL-19) Traditional styling doors, with wood grain. Corrosion Resistant Doors are constructed using an extruded aluminum style and rail internal frame system with face sheets rabbited into integral reglets of stiles and rails. Core is non-CFC urethane foam with a minimum five pounds per cubic foot density that is bonded to the outer door shells. Overall panel thickness is 1-7/8 inches with an "R" factor of 12.18. 2.C.1. Features: Provide with the following optional features: 2.C.1.a. Sealed seams. 2.C.1.b. Closed top and bottom rails. 2.C.1.c. Foam-filled stiles and rails. 2.C.2. AMP Facing 0.120 inch thick wood grain acrylic modified polyester face sheets available in a variety of colors. 2.C.3. AMP Facing Color: 2.C.3.a. Wood Stain Color: _____ 2.C.3.b. Wood Stain as Selected from the manufacturer's standard selections. 2.C.3.c. Kynar Color: ______. 2.C.3.d. Kynar Color as Selected from the manufacturer's standard selections. 2.C.3.e. Custom Kynar Color. 2.C.4. Aluminum Stile and Rail Finish: Class 1 (0.7 mil) anodized. 2.C.5. Vision Light Options: 2.C.5.a. Glazing: 2.C.5.a.1) 1/4 inch (6.4 mm) safety glass. 2.C.5.a.2) 1/2 inch (13 mm) safety glass. 2.C.5.a.3) 1 inch (25 mm) insulated safety glass. 2.C.5.a.4) 1 inch (25 mm) insulated safety glass with internal muntins. 2.C.5.b. Muntins: Aluminum surface-applied. 2.C.5.b.1) 1/2 inch (13 mm) width. 2.C.5.b.2) 1-1/4 inch (32 mm) width. 2.C.6. Louvers: Louver units are inverted "Y" type fixed vane type. Vanes are secured by rivets around the outside of the frame, inaccessible and hidden from view. 2.C.6.a. Free air space is 50 percent of louver area. 2.C.6.b. Size: As indicated on the Drawings. 2.C.7. Security Grate: Security Grate fabricated using a 1 inch by 1 inch by 1/8 inch (25 mm by 08230-8 25 mm by 3.2 mm) steel angle perimeter frame and metal mesh. 2.C.8. Vandal Screen: Vandal Screen is fabricated with a stainless steel mesh in an anodized or painted aluminum frame fastened to the door with self-retaining, tamper-proof, pin-torx fasteners. Mesh screen is matte black, powder-coated stainless steel, round-hole mesh screen with a 63 percent open area. 2.C.9. Bottom Brush: Adjustable bottom brush with two nylon bristle brushes to create a weather-tight seal. Two adjustment screws at the hinge stile side of the door allow either side or both sides of the brush insert to be moved from .15 inch (3.8 mm) and extended to .74 inch (18.8mm). 2.C.10. Bi-Fold Unit: Panels fold out of opening and attach securely to each other and the door magnetically. Four cam-locks secure the bi-fold in the closed position. 2.C.10.a. Provide with insect and vandal screen. 2.C.10.b. Provide with insect and security grate. 2.C.11. Threshold: Extruded aluminum fabricated to fit jamb to jamb and provided with threshold clips. 2.C.11.a. Size/Style : 2.C.11.a.1) THRS-1 - Flat 1/2 inch by 4 inches (12.7 mm by 102 mm). 2.C.11.a.2) THRS-2 - Flat 1/2 inch by 5 inches (12.7 mm by 127 mm). 2.C.11.a.3) THRS-5 - Flat 1/4 inch by 5 inches (12.7 mm by 127 mm). 2.C.11.a.4) THRS-6 - Latch Track 1/4 inch by 5 inches (12.7 mm by 127 mm). 2.C.11.a.5) THRS-4 - Flat 1/2 inch by 7 inches (12.7 mm by 178 mm). 2.C.12. Door Pulls and Push Bars as Durable as Our Doors: Extruded aluminum designed to visually complement our door and framing products. Anodized finishes is Class 1 (0.7 mil/.018 mm) standard. 2.C.12.a. SL-150 Gooseneck Fluted Push Bar 2.C.12.b. SL-100 Surface-Mounted Door Pull. 2.C.12.c. SL-100 Surface-Mounted Door Pull with cylinder hole when used with an exit device. 2.C.13. Astragals: Provide Astragals designed to cover the clearance gap between door pairs, act as a weather seal, minimize noise, reduce smoke infiltration in case of a fire, and increase energy-efficiency of the entrance. 2.C.13.a. Pile weather seal 2.C.13.b. Vinyl weather seal 2.C.13.c. Special-Lite Astragals for doors with a radius stile or a bevel stile.

2.D. Flush Corrosion Resistant Doors: FRP-20 (SL-20) Flush Corrosion Resistant Doors are constructed using an extruded aluminum style and rail internal frame system with Sandstone- Textured face sheets rabbited into integral reglets of stiles and rails. Core is non-CFC urethane foam with a minimum five pounds per cubic foot density that is bonded to the outer door shells. Overall panel thickness is 1-7/8 inches with an "R" factor of 12.18. 2.D.1. 08230-9 Features: Provide with the following optional features: 2.D.1.a. Sealed seams. 2.D.1.b. Closed top and bottom rails. 2.D.1.c. Foam-filled stiles and rails. 2.D.2. FRP Facing 0.120 inch thick Sandstone-Textured FRP face sheets available in a variety of colors. 2.D.3. FRP Facing Color: 2.D.3.a. Molded Color: _____ 2.D.3.b. Molded Color as Selected from the manufacturer's standard selections. 2.D.3.c. Custom Color. 2.D.4. Aluminum Stile and Rail Finish: Class 1 (0.7 mil) anodized. 2.D.5. Vision Light Options: 2.D.5.a. Glazing: 2.D.5.a.1) 1/4 inch (6.4 mm) safety glass. 2.D.5.a.2) 1/2 inch (13 mm) safety glass. 2.D.5.a.3) 1 inch (25 mm) insulated safety glass. 2.D.5.a.4) 1 inch (25 mm) insulated safety glass with internal muntins. 2.D.5.b. Muntins: Aluminum surface-applied. 2.D.5.b.1) 1/2 inch (13 mm) width. 2.D.5.b.2) 1-1/4 inch (32 mm) width. 2.D.6. Louvers: Louver units are inverted "Y" type fixed vane type. Vanes are secured by rivets around the outside of the frame, inaccessible and hidden from view. 2.D.6.a. Free air space is 50 percent of louver area. 2.D.6.b. Size: As indicated on the Drawings. 2.D.7. Security Grate: Security Grate fabricated using a 1 inch by 1 inch by 1/8 inch (25 mm by 25 mm by 3.2 mm) steel angle perimeter frame and metal mesh. 2.D.8. Vandal Screen: Vandal Screen is fabricated with a stainless steel mesh in an anodized or painted aluminum frame fastened to the door with self-retaining, tamper-proof, pin-torx fasteners. Mesh screen is matte black, powder-coated stainless steel, round-hole mesh screen with a 63 percent open area. 2.D.9. Bottom Brush: Adjustable bottom brush with two nylon bristle brushes to create a weather-tight seal. Two adjustment screws at the hinge stile side of the door allow either side or both sides of the brush insert to be moved from .15 inch (3.8 mm) and extended to .74 inch (18.8mm). 2.D.10. Bi-Fold Unit: Panels fold out of opening and attach securely to each other and the door magnetically. Four cam-locks secure the bi-fold in the closed position. 2.D.10.a. 08230-10 Provide with insect and vandal screen. 2.D.10.b. Provide with insect and security grate. 2.D.11. Threshold: Extruded aluminum fabricated to fit jamb to jamb and provided with threshold clips. 2.D.11.a. Size/Style : 2.D.11.a.1) THRS-1 - Flat 1/2 inch by 4 inches (12.7 mm by 102 mm). 2.D.11.a.2) THRS-2 - Flat 1/2 inch by 5 inches (12.7 mm by 127 mm). 2.D.11.a.3) THRS-5 - Flat 1/4 inch by 5 inches (12.7 mm by 127 mm). 2.D.11.a.4) THRS-6 - Latch Track 1/4 inch by 5 inches (12.7 mm by 127 mm). 2.D.11.a.5) THRS-4 - Flat 1/2 inch by 7 inches (12.7 mm by 178 mm). 2.D.12. Door Pulls and Push Bars as Durable as Our Doors: Extruded aluminum designed to visually complement our door and framing products. Anodized finishes is Class 1 (0.7 mil/.018 mm) standard. 2.D.12.a. SL-150 Gooseneck Fluted Push Bar 2.D.12.b. SL-100 Surface-Mounted Door Pull. 2.D.12.c. SL-100 Surface-Mounted Door Pull with cylinder hole when used with an exit device. 2.D.13. Astragals: Provide Astragals designed to cover the clearance gap between door pairs, act as a weather seal, minimize noise, reduce smoke infiltration in case of a fire, and increase energy-efficiency of the entrance. 2.D.13.a. Pile weather seal 2.D.13.b. Vinyl weather seal 2.D.13.c. Special-Lite Astragals for doors with a radius stile or a bevel stile.

2.E. Fire Rated Flush Corrosion Resistant Doors: FRP-21 Fire Rated Flush Corrosion Resistant Doors constructed with FRP face sheets bonded to a mineral core with a perimeter designed for secure hardware attachment. Edge capping are natural finish stainless steel screw-applied, welded and buffed at corners. Doors have 11/16 inch minimum blocking at hinge and lock stiles and 6 inch minimum blocking at lacking hardware locations. Overall panel thickness is 1-7/8 inches with an "R" factor of 12.18. 2.E.1. Fire Rating: Doors are tested in accordance with UBC 7-2, NFPA 252, and UL 10C requirements. FRP-21 has passed the 1-1/2 hour positive pressure test, hose stream test, and 250 degree temperature rise tests and is Listed by Warnock Hersey. Provide doors to the Ratings indicated on the Drawings. 2.E.2. FRP Facing 0.120 inch thick FRP face sheets available in a variety of colors. 2.E.3. FRP Facing Color: 2.E.3.a. Molded Color: _____ 2.E.3.b. Molded Color as Selected from the manufacturer's standard selections. 2.E.3.c. Custom Color. 08230-11 2.E.4. Vision Light Options: 2.E.4.a. Glazing: 2.E.4.a.1) 1/4 inch (6.4 mm) safety glass. 2.E.4.a.2) 1/2 inch (13 mm) safety glass. 2.E.4.a.3) 1 inch (25 mm) insulated safety glass. 2.E.4.a.4) 1 inch (25 mm) insulated safety glass with internal muntins. 2.E.4.b. Muntins: Aluminum surface-applied. 2.E.4.b.1) 1/2 inch (13 mm) width. 2.E.4.b.2) 1-1/4 inch (32 mm) width. 2.E.5. Security Grate: Security Grate fabricated using a 1 inch by 1 inch by 1/8 inch (25 mm by 25 mm by 3.2 mm) steel angle perimeter frame and metal mesh. 2.E.6. Vandal Screen: Vandal Screen is fabricated with a stainless steel mesh in an anodized or painted aluminum frame fastened to the door with self-retaining, tamper-proof, pin-torx fasteners. Mesh screen is matte black, powder-coated stainless steel, round-hole mesh screen with a 63 percent open area. 2.E.7. Bottom Brush: Adjustable bottom brush with two nylon bristle brushes to create a weather-tight seal. Two adjustment screws at the hinge stile side of the door allow either side or both sides of the brush insert to be moved from .15 inch (3.8 mm) and extended to .74 inch (18.8mm). 2.E.8. Threshold: Extruded aluminum fabricated to fit jamb to jamb and provided with threshold clips. 2.E.8.a. Size/Style : 2.E.8.a.1) THRS-1 - Flat 1/2 inch by 4 inches (12.7 mm by 102 mm). 2.E.8.a.2) THRS-2 - Flat 1/2 inch by 5 inches (12.7 mm by 127 mm). 2.E.8.a.3) THRS-5 - Flat 1/4 inch by 5 inches (12.7 mm by 127 mm). 2.E.8.a.4) THRS-6 - Latch Track 1/4 inch by 5 inches (12.7 mm by 127 mm). 2.E.8.a.5) THRS-4 - Flat 1/2 inch by 7 inches (12.7 mm by 178 mm). 2.E.9. Door Pulls and Push Bars as Durable as Our Doors: Extruded aluminum designed to visually complement our door and framing products. Anodized finishes is Class 1 (0.7 mil/.018 mm) standard. 2.E.9.a. SL-150 Gooseneck Fluted Push Bar 2.E.9.b. SL-100 Surface-Mounted Door Pull. 2.E.9.c. SL-100 Surface-Mounted Door Pull with cylinder hole when used with an exit device. 2.E.10. Astragals: Provide Astragals designed to cover the clearance gap between door pairs, act as a weather seal, minimize noise, reduce smoke infiltration in case of a fire, and increase energy-efficiency of the entrance. 2.E.10.a. 08230-12 Pile weather seal 2.E.10.b. Vinyl weather seal 2.E.10.c. Special-Lite Astragals for doors with a radius stile or a bevel stile.

2.F. Fire Rated Flush Corrosion Resistant Doors: FRP-21 Fire Rated Flush Corrosion Resistant Doors constructed with FRP face sheets bonded to a mineral core with a perimeter designed for secure hardware attachment. Edge capping are natural finish stainless steel screw-applied, welded and buffed at corners. Doors have 11/16 inch minimum blocking at hinge and lock stiles and 6 inch minimum blocking at lacking hardware locations. Overall panel thickness is 1-7/8 inches with an "R" factor of 12.18. 2.F.1. Fire Rating: Doors are tested in accordance with UBC 7-2, NFPA 252, and UL 10C requirements. FRP-21 has passed the 1-1/2 hour positive pressure test, hose stream test, and 250 degree temperature rise tests and is Listed by Warnock Hersey. Provide doors to the Ratings indicated on the Drawings. 2.F.2. FRP Facing 0.120 inch thick FRP face sheets available in a variety of colors. 2.F.3. FRP Facing Color: 2.F.3.a. Molded Color: _____ 2.F.3.b. Molded Color as Selected from the manufacturer's standard selections. 2.F.3.c. Custom Color. 2.F.4. Vision Light Options: 2.F.4.a. Glazing: 2.F.4.a.1) 1/4 inch (6.4 mm) safety glass. 2.F.4.a.2) 1/2 inch (13 mm) safety glass. 2.F.4.a.3) 1 inch (25 mm) insulated safety glass. 2.F.4.a.4) 1 inch (25 mm) insulated safety glass with internal muntins. 2.F.4.b. Muntins: Aluminum surface-applied. 2.F.4.b.1) 1/2 inch (13 mm) width. 2.F.4.b.2) 1-1/4 inch (32 mm) width. 2.F.5. Security Grate: Security Grate fabricated using a 1 inch by 1 inch by 1/8 inch (25 mm by 25 mm by 3.2 mm) steel angle perimeter frame and metal mesh. 2.F.6. Vandal Screen: Vandal Screen is fabricated with a stainless steel mesh in an anodized or painted aluminum frame fastened to the door with self-retaining, tamper-proof, pin-torx fasteners. Mesh screen is matte black, powder-coated stainless steel, round-hole mesh screen with a 63 percent open area. 2.F.7. Bottom Brush: Adjustable bottom brush with two nylon bristle brushes to create a weather-tight seal. Two adjustment screws at the hinge stile side of the door allow either side or both sides of the brush insert to be moved from .15 inch (3.8 mm) and extended to .74 inch (18.8mm). 2.F.8. Threshold: Extruded aluminum fabricated to fit jamb to jamb and provided with threshold clips. 08230-13 2.F.8.a. Size/Style : 2.F.8.a.1) THRS-1 - Flat 1/2 inch by 4 inches (12.7 mm by 102 mm). 2.F.8.a.2) THRS-2 - Flat 1/2 inch by 5 inches (12.7 mm by 127 mm). 2.F.8.a.3) THRS-5 - Flat 1/4 inch by 5 inches (12.7 mm by 127 mm). 2.F.8.a.4) THRS-6 - Latch Track 1/4 inch by 5 inches (12.7 mm by 127 mm). 2.F.8.a.5) THRS-4 - Flat 1/2 inch by 7 inches (12.7 mm by 178 mm). 2.F.9. Door Pulls and Push Bars as Durable as Our Doors: Extruded aluminum designed to visually complement our door and framing products. Anodized finishes is Class 1 (0.7 mil/.018 mm) standard. 2.F.9.a. SL-150 Gooseneck Fluted Push Bar 2.F.9.b. SL-100 Surface-Mounted Door Pull. 2.F.9.c. SL-100 Surface-Mounted Door Pull with cylinder hole when used with an exit device. 2.F.10. Astragals: Provide Astragals designed to cover the clearance gap between door pairs, act as a weather seal, minimize noise, reduce smoke infiltration in case of a fire, and increase energy-efficiency of the entrance. 2.F.10.a. Pile weather seal 2.F.10.b. Vinyl weather seal 2.F.10.c. Special-Lite Astragals for doors with a radius stile or a bevel stile.

2.G. Fire Rated Flush Corrosion Resistant Doors: AMP-22 Fire Rated Flush Corrosion Resistant Doors constructed with AMP face sheets bonded to a mineral core with a perimeter designed for secure hardware attachment. Edge capping are natural finish stainless steel screw-applied, welded and buffed at corners. Doors have 11/16 inch minimum blocking at hinge and lock stiles and 6 inch minimum blocking at lacking hardware locations. Overall panel thickness is 1-7/8 inches with an "R" factor of 12.18. 2.G.1. Fire Rating: Doors are tested in accordance with UBC 7-2, NFPA 252, and UL 10C requirements. FRP-21 has passed the 1-1/2 hour positive pressure test, hose stream test, and 250 degree temperature rise tests and is Listed by Warnock Hersey. Provide doors to the Ratings indicated on the Drawings. 2.G.2. FRP Facing 0.120 inch thick Sandstone-Textured FRP face sheets available in a variety of colors. 2.G.3. FRP Facing Color: 2.G.3.a. Molded Color: _____ 2.G.3.b. Molded Color as Selected from the manufacturer's standard selections. 2.G.3.c. Custom Color. 2.G.4. Vision Light Options: 2.G.4.a. Glazing: 2.G.4.a.1) 08230-14 1/4 inch (6.4 mm) safety glass. 2.G.4.a.2) 1/2 inch (13 mm) safety glass. 2.G.4.a.3) 1 inch (25 mm) insulated safety glass. 2.G.4.a.4) 1 inch (25 mm) insulated safety glass with internal muntins. 2.G.4.b. Muntins: Aluminum surface-applied. 2.G.4.b.1) 1/2 inch (13 mm) width. 2.G.4.b.2) 1-1/4 inch (32 mm) width. 2.G.5. Security Grate: Security Grate fabricated using a 1 inch by 1 inch by 1/8 inch (25 mm by 25 mm by 3.2 mm) steel angle perimeter frame and metal mesh. 2.G.6. Vandal Screen: Vandal Screen is fabricated with a stainless steel mesh in an anodized or painted aluminum frame fastened to the door with self-retaining, tamper-proof, pin-torx fasteners. Mesh screen is matte black, powder-coated stainless steel, round-hole mesh screen with a 63 percent open area. 2.G.7. Bottom Brush: Adjustable bottom brush with two nylon bristle brushes to create a weather-tight seal. Two adjustment screws at the hinge stile side of the door allow either side or both sides of the brush insert to be moved from .15 inch (3.8 mm) and extended to .74 inch (18.8mm). 2.G.8. Threshold: Extruded aluminum fabricated to fit jamb to jamb and provided with threshold clips. 2.G.8.a. Size/Style : 2.G.8.a.1) THRS-1 - Flat 1/2 inch by 4 inches (12.7 mm by 102 mm). 2.G.8.a.2) THRS-2 - Flat 1/2 inch by 5 inches (12.7 mm by 127 mm). 2.G.8.a.3) THRS-5 - Flat 1/4 inch by 5 inches (12.7 mm by 127 mm). 2.G.8.a.4) THRS-6 - Latch Track 1/4 inch by 5 inches (12.7 mm by 127 mm). 2.G.8.a.5) THRS-4 - Flat 1/2 inch by 7 inches (12.7 mm by 178 mm). 2.G.9. Door Pulls and Push Bars as Durable as Our Doors: Extruded aluminum designed to visually complement our door and framing products. Anodized finishes is Class 1 (0.7 mil/.018 mm) standard. 2.G.9.a. SL-150 Gooseneck Fluted Push Bar 2.G.9.b. SL-100 Surface-Mounted Door Pull. 2.G.9.c. SL-100 Surface-Mounted Door Pull with cylinder hole when used with an exit device. 2.G.10. Astragals: Provide Astragals designed to cover the clearance gap between door pairs, act as a weather seal, minimize noise, reduce smoke infiltration in case of a fire, and increase energy-efficiency of the entrance. 2.G.10.a. Pile weather seal 2.G.10.b. Vinyl weather seal 2.G.10.c. Special-Lite Astragals for doors with a radius stile or a bevel stile. 08230-15 2.3 ALUMINUM FRAMES

3.A. Tube Door Frames with Applied Stops: Frame extrusions are 6063-T6 aluminum alloy, with 1/8 inch (3.2 mm) minimum wall thickness. Corner joints are secured with heavy-duty internal joint anchors. 3.A.1. Frames are available in the following standard sizes: 3.A.1.a. 5/8 inch by 4-1/2 inch (16 mm by 114 mm). 3.A.1.b. 1-3/4 inch by 4 inch (44 mm by 102 mm). 3.A.1.c. 1-3/4 inch by 4-1/2 inch (44 mm by 114 mm). 3.A.1.d. 1-3/4 inch by 5 inch (44 mm by 127 mm). 3.A.1.e. 1-3/4 inch by 6 inch (44 mm by 152 mm). 3.A.1.f. 1 inch by 4-1/2 inch (25 mm by 114 mm). 3.A.1.g. 1 inch by 6 inch (25 mm by 152 mm). 3.A.1.h. 2 inch by 4 inch (51 mm by 102 mm). 3.A.1.i. 2 inch by 4-1/2 inch (51 mm by 114 mm). 3.A.1.j. 2 inch by 5 inch (51 mm by 127 mm). 3.A.1.k. 2 inch by 6 inch (51 mm by 152 mm). 3.A.2. Features: 3.A.2.a. Built-in weather strips and bead seal in applied stops. 3.A.2.b. Applied stops provide 7/16 inch (11 mm) bite for glazing materials, and are secured at ends and every 10 inches (254 mm) for security. 3.A.2.c. 1/2 inch (13 mm) aluminum bar stock reinforcements under door stop at closer, strike and mullion/center post attachment locations. 3.A.2.d. Heavy-duty Flush Glazed Tube Frames with Improved Thermal Performance.

3.B. Flush Glazed Tube Frames: Frame extrusions are 6063-T6 aluminum alloy, with 1/8 inch (3.2 mm) minimum wall thickness. Corner joints are secured with heavy-duty internal joint anchors. 3.B.1. Frames are available in the following standard sizes: 3.B.1.a. SL-45 FG, 1-3/4 inch by 4-1/2 inch (44 mm by 114mm). 3.B.1.b. SL-245 FG, 2 inch by 4-1/2 inch (51 mm by 114mm). 3.B.1.c. SL-260 FG, 2 inch by 6 inch (51 mm by 152mm). 3.B.2. Features: 3.B.2.a. Internally reinforced with aluminum bar stock at the closer, mullion, and locking strike attachment point to reduce metal fatigue and prevent component loosening. 3.B.2.b. Thermally-improved for greater energy efficiency. 08230-16 3.B.3. Glazing: 3.B.3.a. 1/4 inch (3.2 mm. 3.B.3.b. 1 inch (25 mm). 3.B.4. Removable Center Posts: Removable center post fits the standard tube frames and permits easy removal to allow oversized objects to pass. Available in keyed and non- keyed versions and any of our finish options for an exact match to our other products. 3.B.5. Frames are available in the following standard sizes to match framing depth: 3.B.5.a. 2 inch by 4 inch (51 mm by 102 mm). 3.B.5.b. 2 inch by 4-1/2 inch (51 mm by 114 mm). 3.B.5.c. 2 inch by 5 inch (51 mm by 127 mm). 3.B.5.d. 2 inch by 6 inch (51 mm by 152 mm). 3.B.6. Features: 3.B.6.a. Thermally-improved for greater energy efficiency. 3.B.6.b. Internal locking bolts engage top and bottom fittings. 3.B.6.c. Pre-drilled for all hardware. 3.B.6.d. Dual weather stripping. 3.B.6.e. Concealed top and bottom fittings.

2.4 FIBERGLASS FRAMES

4.A. Fiberglass Door Frames: 4.A.1. Frames are available in the following standard sizes to match framing depth: 4.A.1.a. 2 inch by 5-3/4 inch (51 mm by 146 mm). 4.A.1.b. 2 inch by 6-3/4 inch (51 mm by 171 mm). 4.A.1.c. 2 inch by 7-3/4 inch (51 mm by 197 mm). 4.A.1.d. 2 inch by 8-3/4 inch (51 mm by 222 mm). 4.A.2. Header: 4.A.2.a. 2 inches. 4.A.2.b. 4 inches. 4.A.3. Features: 4.A.3.a. 3/8 inch thick corner reinforcement. 4.A.3.b. 3/4 inch reinforcement at frame anchor locations. 4.A.3.c. 1/4 inch reinforcement at butt hinge locations. 08230-17 PART 3 EXECUTION

3.1 EXAMINATION

1.A. Do not begin installation until substrates have been properly prepared.

1.B. Verify opening sizes, tolerances and conditions are acceptable.

1.C. Examine conditions of substrates, supports, and other conditions under which this work is to be performed.

1.D. If substrate preparation is the responsibility of another installer, notify Architect of unsatisfactory preparation before proceeding.

3.2 PREPARATION

2.A. Clean surfaces thoroughly prior to installation.

2.B. Prepare surfaces using the methods recommended by the manufacturer for achieving the best result for the substrate under the project conditions.

3.3 INSTALLATION

3.A. Install in accordance with manufacturer's instructions.

3.B. Install fire doors in compliance with requirements of NFPA 252, and UL 10C. Test fire-release system and reset components after testing.

3.C. Anchor assembly to wall construction and building framing without distortion or stress.

3.D. Fit and align assembly including hardware; level and plumb, to provide smooth operation.

3.E. Coordinate installation of electrical service with Section 16150. Complete wiring from disconnect to unit components.

3.F. Coordinate installation of sealants and backing materials at frame perimeter as specified in Section 07900.

3.4 ADJUSTING

4.A. Test for proper operation and adjust as necessary to provide proper operation without binding or distortion.

4.B. Adjust hardware and operating assemblies for smooth and noiseless operation.

08230-18 3.5 CLEANING

5.A. Clean door faces and components using non-abrasive materials and methods recommended by manufacturer.

5.B. Remove labels and visible markings.

5.C. Touch-up, repair or replace damaged products before Substantial Completion.

3.6 PROTECTION

6.A. Protect installed products until completion of project.

6.B. Touch-up, repair or replace damaged products before Substantial Completion.

3.7 SCHEDULES

7.A. :

7.B. :

END OF SECTION

08230-19