KX-NS1000NE Main Unit Software

KX-NS1000NE Main Unit software

← Main Unit Software V2.10055 (2013 May 27/ 66,881,081 bytes) You can upgrade the MPR software from old version without initializing or converting your DSYS. ← Release Note ← V2.10055 → xls [Market problem] 1. Few IP-PT sometimes resets, in environment which many IP-PT operates. 2. System sometimes resets, in environment which many PS operates and many call initiate. 3. HTTP port number can't be set to 35300. 4. Some CS does not start at the time of a system startup. 5. CTI applications cannot do Monitor start on slave site's DISA device

← . ← V2.10046 → xls [Market problem] 1. Slave system sometimes repeatedly resets, after performing program update. 2. System resets, when special SDP is received. 3. During a conference, participants hear a ring back tone. 4. Caller Name reception problem when using SLC2/PRI23 Card. 5. Constant Windows failures while trying to transfer TVA voice data files to the NS1000. ← V2.10043 [Market problem] 1. All EXT seemed to be busy caused by system resource leak. 2. Oneway path connection when using call monitor for Russia. ← V2.10041 [New features] Enhancement for Easy Setup 1. User profiles and Mailbox auto configuration 2. Voice data convert from KX-TVM200/50 to KX-NS1000 ← V2.04015 → xls [New features] 1. Supporting UT670, NT560 Note) Need to update the UT670 to V01.122

Market problem]

2. ISDN Extension Number can not use wild card X on BRI port installed to NCP. ← V2.03007 → xls [Feature Enhancement] 1. MDA additional requested feature (Improve the operation when Dummy PS registration at ICD Group) 2. HK(Hong Kong) Initial value change for HK SIP carrier. (4th bit of SIP option) 3. SIP Trunk improvement for Colombia and Saudi Arabia SIP carrier. (SDP m line issue)

Market problem]

4. Countermeasures against the possibility that UM become unusable with call conference in slave unit. 5. Countermeasures against that "00" delete from CLIP while call divert with T- mobile 6. Improve ICD group queueing call. In spite of incoming call was queued, No phones are ringing ← V2.03005 [Feature Enhancement] 1. MDA(MEX) feature enhancement ← V2.03001 → xls [New features] 1. Supporting Legacy Gateway (TDE/TDA) Stacking Card for TDE/TDA series (KX-NS0132)

[Market problem] (Field Test)

2. Countermeasures against the possibility that the system reset occurs in the WebDB process 3. Measures the following problem in the networking survivability configuration - NT/UT terminal start-up is delayed when the system master switch to the backup master ← V2.02043 → xls [New features] 1. Supporting SIP based DECT - Supporting UDS124/UDT111/UDT121 - Automatic Rerouting to Secondary PBX (Redundancy of SIP based DECT Terminal registration) Note) Need to update the SIP based DECT CS & PS software CS: ver 01.201 (KX-UDS124) PS: ver 01.09.001 (KX-UDT111) PS: ver 01.09.001 (KX-UDT121)

[Market problem] (Field Test)

2. Countermeasures against the possibility that the system reset occurs during a call by pressing dial 9 (Bug in the path status log function for debugging) ← V2.01011 → xls [New features] 1. Supporting Legacy Gateway (NCP) Stacking Master Card: KX-NS0130, Stacking Card for NCP: KX-NS0131 2. Supporting E1 Trunk/PRI Adaptor (KX-NS8188/NS8290) 3. Supporting New IP-PT KX-NT500 Series 4. Remote connection by external SBC device for UT series SIP Phone

[Feature Enhancement]

5. Networking Enhancement : One-look Networking Survivability - "Backup-master mode" and "Isolated mode" are supported. 6. KX-UT feature enhancement - Automatic Rerouting to Secondary PBX (Redundancy of KX-UT Terminal registration) - Confirmation Tone to KX-UT terminal - Flash Recall Note) Need to update the UT terminal(KX-UT113/123/133/136/248) software to V01.210 7. SIP phone operation enhancement - Blind Transfer 8. Web Maintenance Console improvement - Copy & Paste Operation - Additional languages (Portuguese, Dutch) [Market problem]

9. There was a possibility to cause DCSYS file corruption when DCSYS is donloaded to a PC. ← V1.11016

. The following items were fixed. 1. Transfer trouble of KX-UT series 2. E000101: Value range error (PS Extension Setting) 3. System reset by importing the Wired extension data (CSV). V1.11012 . You can upgrade the main software of KX-NS1000 from V1.0 or V1.1 to V1.11 without initialization. . Please see the list of changing points. → xls. . Software Enhancement (PPT) V1.10021 . You can upgrade the main software of KX-NS1000 from V1.0 to V1.1 without initialization. . Please see the list of changing points. → html. V1.02007 - Fixed market problem : System reset sometimes occurred when an incoming call from outside arrives. V1.02006 - Fixed market problem : System reset sometimes occurred by some operations of a SIP extension or transfer operation of an ICDG member. V1.02003 - Initial value change for BX/XE/RU/UC/AG/BR - Improvement of System speed dial download. - Fixed market problem : System reset occurred when make MBOX by add-range function. V1.01007 - Fix the problem that E-Mail address can't have special characters. V1.01004 - 2nd Release V1.000 - First Release