Upgrade Via Communication Software

Upgrading SYnergy/A Firmware

Upgrade via Communication Software

Preliminary to upgrade Open the Version_[XXXXX] folder, save and extract the relevant upgrade file to DEF | SYnergy in your SY-Bridge/SY-Server/[Other Communication Software] directory. OR: If you decide to save this file under a different path, please specify path on Upgrade.rdy under software root directory (three instances of SrcFile = ___).

Running terminal upgrade (perform on a single terminal first) 1. Run your communication software. 2. Select terminal to be upgraded. 3. Test communication to terminal and check status of current version. 4. Go to Maintenance | Synergy Management | Update Firmware. A window opens. 5. Fill-in password: day x month (Gregorian date), Click Unlock and OK. 6. If this is your first upgrade, click the browse button and browse to upgrade file location (A/M). Click the B button to check file location and click Save to exit (path will be saved). Upgrade will now take place. Terminal will be inactive. Do not attempt to use terminal, as upgrade must continue uninterrupted! 7. Once upgrade has been terminated, check communication with terminal and compare current status version with status version prior to upgrade. 8. Now upgrade (steps 3-7) may be repeated on multiple terminals (more than one terminal, as per your choice). Upgrade via Disk on Key

1. Open the Version_[XXXXX] folder, save and extract the relevant upgrade file. 2. Copy the Repair folder to your DOK root directory. 3. Plug your DOK into terminal. 4. Reboot terminal. Upgrade will now begin. Prompt displays notifications on upgrade progress until a completion message is displayed. 5. Unplug DOK.

Synel MLL Payway LTD. Upgrade by burning your SD card (existing or new)

Note: Make sure your SD memory card is at least 4 Giga, class 10. 1. After downloading SGA-AllConfigs-30292.zip file, save it to your PC (where your image writer [such as Win32DiskImager] is located). 2. Run your image writer and browse to SGA-AllConfigs-30292.zip file location. 3. Click Write. Make sure burning of image is completed successfully. 4. Turn terminal off. 5. Insert card to designated slot in terminal. 6. Turn terminal on.