Tablet Disintegration Tester

Tablet Disintegration Tester (Model No: TD-40S)

Campbell Electronics has launched Tablet Disintegration Testers new TD series represents the very latest in tablet testing technology. Excellent production techniques combined with modern microprocessor design guarantee the highest standards of performance and reliability. All disintegration testers meets the latest specification as laid down in the European, United states and associated pharmacopoeia. Available in two stations (Models TD-20S/D), three stations(Models TD-30S/D) and four stations (Model TD-40S/D). Select required model to suit application and affordability. Efficient, compact new design allows the user to observe the test better way. Smooth jerk-free almost maintenance-free drive design together with advanced microprocessor based design electronics assures top performance. It is ideal for both R&D and routine quality control applications. Ideal for testing the normal plain or coated and delayed release coated tablets and gelatin capsules.

(TD-40S) Efficient, compact new design allows the user to observe the test better way. Smooth jerk-free almost maintenance-free drive design together with advanced microprocessor based design electronics assures top performance. It is ideal for both R&D and routine quality control applications. Ideal for testing the normal plain or coated and delayed release coated tablets and gelatin capsules.

The electronic stroke control is provided with its micro-controller based motor drive guarantees an accuracy (better than) of ±1 stroke In new TD series of disintegration testers, the temperature is controlled by means of an internal bath heater. The heater controller/circulation has an accuracy of .better than ± 0.2ْC thus ensuring a constant and even distribution o heat throughout the bath

The water bath is constructed such a way that the water inside the bath will be circulated properly to maintain even temperature all over the bath without effecting the dissolution. The bath temperature can be constantly monitored using the PT 100 temperature probe provided for this purpose. An external probe is provided to monitor the temperature inside the test beaker. Provision (optional) is made for logging the actual strokes per minute, set temperature and deviation with the set value, at user programmed intervals throughout the test for subsequent printing. The control is provided by a membrane keypad linked to 20X4 backlit LC Display, which together with modular type electronics makes instrument easy to operate and easy to service. New TD series disintegration testers are supports not only normal disintegration also suppository disintegration with optional suppository test basket with tank.

During the test the following information is shown on the display: Date, clock, temperature (set, bath and external), elapsed test time. An audible alarm alerts the user on completion of test and test baskets will park at top position. The TD series is provided with parallel printer port connection for print out of test report comprising the date and time of the test start and end of the used, serial no of the instrument, date of validation together with the strokes per minute and temperature actual and set values at operator selectable time intervals during the test. Salient Features:

 Complies to all current USP,EP and  Selectable type of disintegration normal other pharmacopoeia basket / suppository basket*  Supports 4 baskets*  Auto parking of baskets at top position.  Compact, user-friendly operation  Online validation of strokes per minute.  Splash-proof membrane keypad  External circulation pump  20 X 4 LCD screen with backlit  Safety features  Quick-release basket design  Bath illumination for better visibility  Connectivity with PC compatible key  Validation Protocol board for feeding product information.  IQ/OQ Documents