(Estimates Only Actual Costs Will Be Invoiced) Last Revised: February 2013

(Estimates only – actual costs will be invoiced) Last Revised: February 2013

Project No. ______Location ______Consultant ______Developer ______City Project Supervisor ______Date ______

*All works below to be performed by the City of Surrey

1. WATERMAIN TESTING & CHLORINATION:

Average cost, regardless of size, to flush, test, disinfect and deliver sample to lab. A 10 hour minimum applies to all jobs at a minimum cost of $1000.

Length of Watermain Cost Location (Street/Ave) Number of Mains Extended Cost

< 100 metres of pipe = $1,000 (min) ______X ______= $______

101 m - 200 m of pipe = $1,800 ______X ______= $______

201 m - 300 m of pipe = $2,400 ______X ______= $______

301 m - 400 m of pipe = $3,000 ______X ______= $______

401 m – 500 m of pipe = $3,200 ______X ______= $______

501 m – 700 m of pipe = $3,500 ______X ______= $______

701 m – 1200 m of pipe = $5,000 ______X ______= $______

Note: Large diameter pipe longer than 1000m will cost in excess of $5,000, depending on access. May require a more detailed estimate. TOTAL 1:$ ______

2. WET TAP ONLY FOR 19mm- 50mm SERVICE CONNECTIONS: Installation of the remaining service connection and reinstatement of the road crossing. Materials to be supplied by the Developer.

Size of Existing Watermain Lot Numbers Cost (Labour Only) Extended Cost

Tap onto a 100mm pipe ______$500 X______= $______

Tap onto a 150mm pipe ______$500 X______= $______Tap onto a 200mm pipe ______$600 X______= $______

Tap onto a 300mm pipe @ ______$600 X______= $______

Tap onto a 400mm pipe @ ______$750 X______= $______

TOTAL 2: $ ______

3. WATERMAIN TIE-INS: Any tie-in greater than 300mm is to be reviewed and estimated by the Water Operations Manager. Materials to be supplied by the Contractor at the Developer's cost.

Size Location(s) Cost Number Extended Cost

100mm to 300mm ______$9,000 X _____= $______

______

> 300mm ______Requires Estimate ☐ $______

TOTAL 3:$ ______

Minimum cost of $500 per visit for City Water Ops to witness Water Tie-Ins.

4. SERVICE CONNECTIONS TO EXISTING MAINS: City of Surrey to supply materials.

Lot Number Street Size Near Side or Far Side Number Extended Cost

______20mm $3,500 $6,500 X ______= $______

______25mm $3,700 $6,500 X ______= $______

______38mm $4,000 $7,000 X ______= $______

______50mm $7,000 $10,000 X ______= $______

TOTAL 4: $______5. INSTALLATION OF FIRE HYDRANTS:

Locations Cost Number Extended Cost

______Near side $10,500 X______= $ ______

______Far Side $17,500 X______=$ ______

TOTAL 5:$ ______

6. RELOCATION OF EXISTING HYDRANTS: Remove hydrant & valve, install blind flange and install standard hydrant assembly & valve. More complex relocations are to be reviewed and estimated by the Water Operations Manager. Work by City of Surrey includes labour and materials.

Locations Description Cost Number Extended Cost

______Near side of main $ 8,000 X ______=$ ______

______Far side of main $13,000 X ______=$ ______

______Extend hydrant lead $5,200 X ______=$ ______

______Abandon hydrant $ 4,200 X ______=$ ______

______Complex relocation Requires Estimate ☐ $______

Total 6:$ ______

7. FIRELINE / DOMESTIC CONNECTIONS : Any connections greater than 200mm are to be reviewed and estimated by the Water Operations Manager. Work by City of Surrey includes labour and materials.

Locations Size Near Side Far Side Number Extended Cost

______50 mm $7,000 $10,000 X ______=$ ______

______100 mm – 200 mm $12,000 $20,000 X ______=$ ______

______> 200mm Requires Estimate ☐ $______TOTAL 7: $______8. RELOCATE / EXTEND EXISTING RESIDENTIAL CONNECTIONS TO NEW PROPERT LINE:

Connections that involve tree conflicts are to be reviewed and estimated by the Water Operations Manager.

Lot Number Size Cost Number Extended Cost

______20mm $1,500 X ______= $______

______25mm $1,700 X ______= $______

______38mm $2,000 X ______= $______

______50mm $2,500 X ______= $______

______Tree Conflict Requires Estimate ☐ $______

TOTAL 8: $______

9. ABANDON EXISTING RESIDENTIAL SERVICE CONNECTIONS :

For water connections 50mm in diameter and smaller. Abandonments that involve tree conflicts are to be reviewed and estimated by the Water Operations Manager.

Lots Cost Description Number Extended Cost

______$1,500. for connections in boulevard areas X ______= $______

______$3000. for connections under sidewalk X______= $ ______

______$4,500. for connections under curb or asphalt X______= $______

______Tree Conflict Requires Estimate ☐ $______

TOTAL 9: $______

10. ABANDON EXISTING WATERMAIN AT THE DEVELOPER’S COST :

General Location Cost Description Number of Main(s) Extended Cost

______$15,000 Abandon existing Watermain(s) X ______= $______Refer to design drawings

TOTAL 10: $______11. TRANSFER EXISTING WATER SERVICE CONNECTION(S) TO NEW WATERMAIN AT THE DEVELOPER’S COST:

Contractor is to install water connections off of the new main at time of main installation and bring service connections to the location of the existing Water Daigle at property line. Contractor is to excavate existing water connections at property line for Surrey personnel to transfer the connections and abandon the old service connections.

Address Cost Description Number Extended Cost

______$200 Transfer Connection(s) X ______= $______

______$200

TOTAL 11: $______

12. ABANDON EXISTING WATERMAIN AT THE CITY’S COST:

General Location Cost Description Number of Main(s) City’s Cost

______$15,000 Abandon existing Watermain(s) X ______= $______Refer to design drawings

TOTAL 12: $______

13. TRANSFER EXISTING WATER CONNECTION(S) TO NEW WATERMAIN AT CITY’S COST:

Address Cost Description Number City’s Cost

______$200 Transfer Connection(s) X ______= $______

______$200

TOTAL 13: $______

TOTAL DEVELOPER’S ESTIMATE: $______(Totals 1-11, inclusive)

TOTAL CITY’S ESTIMATE: $______(Totals 12-13, inclusive)

D:\Docs\2018-05-08\041a0f325a9fa5a2251ed04a05717be1.docx

RT 6/9/18 9:08 a6/p6