Velloils High Temperature

VELLOILS HIGH TEMPERATURE & SPECIALITY GREASE VELLOPLEX GREASE

VELLOPLEX Lithium base complex Grease specially develops for ball and roller bearing Lubrication where long life and trouble free performance are the key requirements. They possess outstanding oxidation and mechanical stability, water resistance and rust protection properties. Their exceptionally high dropping point over 260 0 C given them excellent resistance to leakage, dripping & throw off at elevated operating temperatures. These Grease are suitable for high temperatures application up to 190 0 C.

Typical Specification

Soap Type Lithium Complex

Colours Green

Appearance Smooth Homogeneous Bright & Shiny

Structure Short fiber

Unwork Penetration 272 @ 25 0 C + l

Worked (60 Strokes) 275

Drop Point 0C 262 VELLOILS HIGH TEMPERATURE & SPECIALITY GREASE VELLOGUARD 07(Moly Grease)

Velloguard 07 Moly Grease represents a new development in long life, high temperature lubrication.

Velloguard 07 Molyplex Grease is MOS2 containing lithium complex grease designed with high viscosity mineral oils to withstand water washout and severe working conditions.

Velloguard 07 also exhibits excellent extreme pressure and anti - wear properties, and combined with a high dropping point, provides good high temperature properties. This product has also excellent rust protection properties as well as superior mechanical stability.

Typical Applications

Velloguard 07 is a multi - functional products that can be used anywhere a long life, high temperature is required. Some typical applications include disc and drum brake wheel bearing, all type of anti - friction bearings, joints and shafts, small slow gear units etc.

Velloguard 07 is highly recommended for high temperature ball and roller bearings lubrication in steel Mill.

Velloguard 07 is typically used in those applications where bearings are exposed to large amount of water and high shock loads are encountered.

Velloguard 07 is fortified with the optimum level of Molybdenum Di sulphide for better high load carrying, extreme temperature properties and for added wear protection.

Performance Qualities * Multifunctional lubricating Grease. * Outstanding high temperature capabilities. * Excellent extreme pressure and anti - wear properties. * Superior sheer stability, Oxidation resistance and corrosion protection. * Excellent resistant to water wash our maintaining consistency, thus protecting bearing from wear. * Suitable for long life applications. * Good for use in central lubricating systems.

Typical Properties

Appearance - Greay smooth Grease NLGI Grade - #2 Thickner type - Lithium complex Solid Lubricant MOS2 - Maximum 3 - 5% Mineral oil viscosity @ 40 C ASTM: D - 445 60 - 80 cst Penetration, 60 strokes ASTM D - 217 265 / 295 Dropping Point ASTM D - 2265 260 - 275 Timken Load, lbs ASTM D - 2509 50 Rust Test ASTM D - 1743 Pass Bom oxidation, PSI loss ASTM - D - 942 2 at 100 hrs.

VELLOILS HIGH TEMPERATURE & SPECIALITY GREASE

VELLOGUARD 07X

Made from high viscosity base oils formulated with lubricating solids and lithium complex base grease thickener for exceptional resistance to heat and moisture. Withstand extended temperature / exposure to 150 0 C and resist dripping at even high temperatures.

Moly dry lubricant solids protect Equipment despite shock loads and boundary conditions. This grade grease is made in order to have price factor economically but at the same time this work very well.

Typyical properties :

Thickner Lithium complex Dropping Point C 0 260 - 275 Solid Lubricant Moly dry Powder (MOS2) Timken EP OK, kg / lb 20 / 45 Four ball EP test, kg 60 Multipurpose services. Good for all Services.

We have other N.L.G.I. grades available in this composition. Manual and Automatic dispensing possibilities are available.

Resists water washout and this complex grease is having very high shear stability and maximum protection of rust and corrosion. Available in One Kilo container and also in bulk packs as well. VELLOILS HIGH TEMPERATURE & SPECIALITY GREASE

VELLOGUARD - G (TEFLON GREASE)

VELLOGUARD - G High temperature, Multi functional “The Trouble Shooter” Teflon Grease is fortified with fine micronised Teflon with anti corrosion and Extreme pressure additives with lithium base grease having NLGI - 2 consistencies.

BENIFITS: VELLOGUARD - G deposits a fine protective and lubricating film on metal part. It is virtually unaffected by corrosive moisture and will not migrate from hot surfaces. Velloguard - G is water resistant, stable at high temperatures, resist oil sepration and is chemically and mechanically stable operating temperature range from - 30 c to 240 c in high speed tests Velloguard - G performed better than any other petroleum oil or grease lubricant.

FEATURES:

MATERIAL AND LABOUR COST DOWN: One application of Velloguard - G will do the same job as six application of conventional grease.

EQUIPMENT RUNS SMOOTHER AND LONGER: Velloguard - G deposits a fine protective and lubricating film on the metal that will continue to function even after grease has extruded away incipient seizure is avoided with use of this grease. High penetration of our grease will help user for long duration replenishment.

TEMPERATURE/LOAD PROBLEM SOLVER: Micro particles of Teflon suspended in Velloguard - G ensure continued performance on equipment operating at high loads and extreme temperatures. Perform excellent at low temperature.

RESISTANT TO WATER AND WEATHER: Provides extended protection against rust in moist environments and won’t migrate from hot surfaces. A real plus on precision equipment and heavy machinery.

APPLICATION: VELLOGUARD- G Proven performance with unlimited application: Automotive vehicles, Construction equipments, Farm Machinery, Gears, Bearings, Jacks, Screws, Hydraulic and industrial equipment.

Typical Specification Velloguard - G

PROPERTY PROCEDURE PERFORMANCE

NLGI Grade ASTM - 217 #2 Thickner Type - Lithium Worked Penetration ASTM - 217 265 - 295 Dropping Point ASTM - 566 240 0 C Texture - Smooth Buttery Colour - Green Rust Preventive ASTM - 1743 Excellent Swelling of Natural FTM - 3603 8% Rubber Wear Properties ( Falex ) ASTM - 2670 Excellent at 1450 lbs

AVAILABILITY: - Pack size 1kg, 20kg, 30kg, 180kg.