FS20 Fire Detection System Inscription Strips

Cerberus PRO Fire detection system

Inscription strips

We reserve all rights in this document and in the subject thereof. By acceptance of the document the recipient acknowledges these rights and undertakes not to publish the document nor the subject thereof in full or in part, nor to make them available to any third party without our prior express written authorization, nor to use it for any purpose other than for which it was delivered to him.

Building Technologies Fire Safety & Security Products 1 Introduction...... 5

2 Fire control panel / Fire terminal...... 6

3 Floor repeater terminal...... 8

4 Floor repeater display...... 10

5 LED indicators...... 12

3 Building Technologies 0dc2aa12b1c73bde752e1a9ff14160c6 .doc Fire Safety & Security Products 11.2007 4 Building Technologies 0dc2aa12b1c73bde752e1a9ff1416 0c6.doc Fire Safety & Security Products 11.2007 Introduction

1 Introduction

Purpose This document contains the templates for the inscription strips. They are required for the installation-specific inscription of the operation elements and indication elements.

As this document is made available as a PDF file, you may open this document as a Word file - to complete the templates - with the following symbol.

Symbol (only visible in the PDF file):

Prerequisite The font 'Siemens Sans' must be installed on your PC:

Important notes  Do not make any modifications to the formats (size, cut, etc.) Should you have made any modifications accidentally, please download the latest version from the Siemens Intranet.  To ensure a consistent appearance, only use the font 'Siemens Sans'.  If there is not enough space for your text in the fields, you may reduce the spacing.  To ensure an effortless insertion of the inscription strips, use paper with a weight of at minimum 120 g/m2. In addition, the inscription strips remain permanently flat with this paper thickness.

Procedure 1. Make sure that the required fonts are installed on your PC. Any missing fonts must be installed before you open the template. 2. Label the template. 3. Print out the template. 4. Cut out the inscription strips. 5. If need be, cut off the edges marked in grey. 6. Insert the inscription strips into the devices at the corresponding locations.

Modification index Version Date Short description 008837_a_en_NL 11.2007 First edition

Download You can find the current version of the documentation on our intranet.

5 Building Technologies 0dc2aa12b1c73bde752e1a9ff14 160c6.doc Fire Safety & Security Products 11.2007 Fire control panel / Fire terminal

2 Fire control panel / Fire terminal

ALARM Volgend alarm Zoemer uit

Doormelding Accepteren Geactiveerd Storing / Uit Terugstellen . Alarmgevers Geactiv. Doormeldvertraging . uit Storing / Uit Sturingen Dagorganisatie in . Geactiveerd . Storing / Uit Ledtest

STORING (2)

SYSTEEMDEEL UIT

MELDERTEST (3) (4) Systeem Bedrijf Type Storing

6 Building Technologies 0dc2aa12b1c73bde752e1a9ff14 160c6.doc Fire Safety & Security Products 11.2007 Introduction 1

FC2020

Silence buzzer

Acknowledge

More alarms Reset

Remote alarm FAULT Active ISOLATION Fault / Off Alarm device DETECTOR TEST Active Fault / Off System Control function On Active Fault Fault / Off

All dimensions are in mm.

3 Floor repeater terminal

ALARM Volgend alarm Zoemer uit

Accepteren

Terugstellen Doormelding geactiveerd

Bedrijf FT2010 (3)

FT2010 (2)

Storing

Systeemdeel uit FT2010 (4)

FT2010 FT2010 (1)

8 Building Technologies 0dc2aa12b1c73bde752e1a9ff14 160c6.doc Fire Safety & Security Products 11.2007 Introduction

FT2010

Silence buzzer

Remote alarm active Acknowledge

System on More alarms Reset

30.15 44.5 44.5 5 9 . 7 1 8 5 5 . 2 7

(3) 6 1 8 1 1 6

(2) 1 7 . 5 8 30.15 6 1 (4) 5 . 6 (1) 8 1 2

Note  All dimensions are in mm.  For optimum hold, the inscription strips must be folded along the dashed lines.

4 Floor repeater display

ALARM Volgend alarm

Zoemer uit

Bedrijf FT2011 (3)

Storing FT2011 (2)

FT2011 (4)

FT2011 FT2011 (1)

FT2011

System on More alarms Silence buzzer

3 1 2 10 Building Technologies 0dc2aa12b1c73bde752e1a9ff14 160c6.doc Fire Safety & Security Products 11.2007 Introduction

30.15 44.5 44.5 5 9 . 7 1 8 5 5 . 2 7

(3) 6 1 8 1 1 6

(2) 1 7 . 5 8 30.15 6 1 (4) 5 . 6 (1) 8 1 2

Note  All dimensions are in mm.  For optimum hold, the inscription strips must be folded along the dashed lines.

5 LED indicators

FTO2002 FTO2002 FTO2002 FTO2002

37.2 2 0 2

All dimensions are in mm

15 Building Technologies 0dc2aa12b1c73bde752e1a9ff14 160c6.doc Fire Safety & Security Products 11.2007 Siemens Switzerland Ltd © 2005-2007 Siemens Switzerland Ltd Building Technologies Group Data and design subject to change without notice. International Headquarters Gubelstrasse 22 CH-6301 Zug Tel. +41 41 - 724 24 24 Fax +41 41 - 724 35 22 www.siemens.com/buildingtechnologies

Document no. 009026_a_en_-- Manual FS20 Edition 11.2007 Section 5