Answers to Measurements and Calculations Test Review

Total Page:16

File Type:pdf, Size:1020Kb

Answers to Measurements and Calculations Test Review

Answers to Measurements and Calculations Test Review 1. 12.9nm 2. a. 9SF b. 4SF c. 7SF d. 7SF 3. a. 93g b. 500g/mL c. 3.1g/cm3 4. a. 50g b. 0.726g/cm3 c. 319K d. 160oz/gal 5. a. 77,000m/day b. 560 hutz c. 4900mg d. 2.139X10-9mil (Jane ran the greater distance) e. 1in = 16.39cm3, 0.03531 ft3 f. (a) 1300min f. (b) 0.056mil/hr g. 14,300cm

Page 59 in textbook Section Review problems: 1. quantitative is numerical and qualitative is non-numerical 2. A testable statement that serves as a the basis for predication and further experiments. 7. a. 103 b. 10-2 c. 106 d. 10-6 e. 10-3 8. a. meters b. mm or cm c. km d. micrometers 9. a. kilograms b. grams c. grams

17. %error = accepted value – experimental value X 100 accepted value 19. between 4.4 and 4.8g 20. It would introduce error in the measurement and any subsequent calculations. 35. 1.53% 36. 18.83% 53. 1.34X108 atoms (find the atomic radius on page 730 but don’t forget to multiply by 2 to find the diameter)

Answers to Measurements and Calculations Test Review 5. 12.9nm 6. a. 9SF b. 4SF c. 7SF d. 7SF 7. a. 93g b. 500g/mL c. 3.1g/cm3 8. a. 50g b. 0.726g/cm3 c. 319K d. 160oz/gal 5. a. 77,000m/day b. 560 hutz c. 4900mg d. 2.139X10-9mil (Jane ran the greater distance) e. 1in = 16.39cm3, 0.03531 ft3 f. (a) 1300min f. (b) 0.056mil/hr g. 14,300cm

Page 59 in textbook Section Review problems: 3. quantitative is numerical and qualitative is non-numerical 4. A testable statement that serves as a the basis for predication and further experiments. 7. a. 103 b. 10-2 c. 106 d. 10-6 e. 10-3 8. a. meters b. mm or cm c. km d. micrometers 9. a. kilograms b. grams c. grams

18. %error = accepted value – experimental value X 100 accepted value 21. between 4.4 and 4.8g 22. It would introduce error in the measurement and any subsequent calculations. 37. 1.53% 38. 18.83% 53. 1.34X108 atoms (find the atomic radius on page 730 but don’t forget to multiply by 2 to find the diameter)

Recommended publications