OVERVIEW OF ICHMM-2011

ICHMM-2011 Conference Schedule, May 22-26, 2011

SUNDAY, 22 MAY 2011 (Auditorium) 17:00-18:00 Kick-off Lecture 1: Mechanical Properties of Heterogeneous Nanostructured Metals Speaker: K. Lu, Chair: J. Fan 18:00-19:00 Kick-off Lecture 2: Origin of Plasticity Length-Scale Effects in Fracture and Deformation Speaker: W.A. Curtin, Chair: D. L. McDowell 19:30-21:30 Reception cocktail party (entrance hall of conference building)

21:00-22:00 Face-to-Face Session with kickoff-lecturer Dr. K. Lu (Chair: J. Fan, Auditorium) MONDAY, 23 MAY 2011

8:00-10:00 5 parallel sessions (a1, b1,c1,d1,l1) 10:00-10:20 Coffee Break Face-to-Face Session with kickoff-lecturer Dr. W. Curtin (Chair: D. L. McDowell, Auditorium) 10:20-12:20 5 parallel sessions (a2, b2, c2, d2, l2) 12:20-12:40 Photography of All Participants 12:40-13:40 Lunch 13:40-15:40 5 parallel sessions (a3, b3, c3, d3, l3) Panel Session A: Fundamental Challenges: Crystal Plasticity of Microstructures, Chair: D.L. McDowell (Auditorium) 15:40-16:00 Coffee Break Face-to-Face Session with Panelists of Panel A (Chair: D. L. McDowell, Auditorium) 16:00-18:10 5 parallel sessions (a4, b4, d4, g1, h1) 18:10-18:30 Meet at Square of the conference building to Picnic 18:30-21:00 Picnic in forest park TUESDAY, 24 MAY 2011 8:00-10:00 5 parallel sessions (a5, b5, f1, g2, O1) Panel Session B: Fundamental Challenges: Key Interfaces of Materials and Mechanics in Heterogeneous Materials, Chair: E. Busso (Auditorium) 10:00-10:20 Coffee Break Face-to-Face Session with Panelists of Panel B (Chair: E. Busso, Auditorium) 5 parallel sessions (a6, a7, b6, f2, O2) 10:20- 12:20 12:30 Lunch in the sightseeing bus in Shanghai 12:30-18:30 Tour to World Expo (China Pavilion)

1/45 18:30-19:00 Dinner in Shanghai Downtown hotel 19:00-20:30 Boat Tour on the HuangPu River 20:30-22:30 Back to Bao Dao village WEDNESDAY, 25 MAY 2011

8:00-10:00 5 parallel sessions (e1, f3, I, m1,r1) 8:00-10:00 Panel Session C: Molecular and cellular biomechanics Chair: H. Gao (Auditorium) 10:00-10:20 Coffee Break Face-to-Face Session with Panelists of Panel C (Chair: H. Gao, Auditorium) 10:20-11:50 4 parallel sessions ( f4, j, m2, r2)

Panel Session D: Multiscale Mechanics Issues in Lithium Battery Co-Chairs: Jinghong Fan and Ting Zhu (Auditorium) 12:00-12:30 HMM/ICHMM Prospective Lecture (1): Huajian Gao Chair: J. Fan, Auditorium) 12:30-13:30 Lunch 13:30-16:00 5 parallel sessions (e2, f5, q1, h2, r3) 17:00-21:00 Conference Banquet at Tianhe Hotel THURSDAY, 26 MAY 2011

8:00-10:00 5 parallel sessions (e3, f6, p1, q2, n1) Panel Session E: Fundamental Challenges: Time-Scale Issues in Atomistic Modeling Chair: W. Curtin (Auditorium) 10:00-10:20 Coffee Break Face-to-Face Session with Panelists of Panel D (Chair: W. Curtin, Auditorium) 10:20-12:20 5 parallel sessions (e4, k, p2, q3, n2) 12:30-13:30 Lunch 13:30-15:00 HMM and ICHMM Prospective Lectures and Conference Summary (Auditorium) Lecture (2) Y. L. Bai, Institute of Mechanics, The Chinese Academy of Science Lecture (3): E. Busso, Centre des Materiaux, Mines Paris, France Chair: D. L. McDowell, Georgia Institute of Technology Panelists: S. Panin, Institute of Strength Physics and Materials Science, SB Russian Academy of Science N. Ghoniem of Univ. of California Los Angles W. Curtin of Brown University J. Fan of Alfred University 15:00 Conference Adjourn 15:10-16:00 Participants transported to airport and Metro station (People’s Square) FRIDAY, 27 MAY 2011

8:00 Participants transported to airport and Metro station (People’s Square)

2/45 ASSIGNMENT OF 54 SESSIONS OF ICHMM-2011

Date Time Room2 Room3 Room4 Room5 Room6

May 23 8:00-10:00 d1 l1 a1 c1 b1 (Mon) 10:20-12:20 d2 l2 a2 c2 b2

13:40-15:40 d3 l3 a3 c3 b3

13:40-15:40 Panel Session A: Fundamental Challenges: Crystal Plasticity of Microstructures (Chair: D.L. McDowell) (Auditorium) 16:00-18:10 d4 a4 h1 g1 b4

May 24 8:00-10:00 o1 f1 a5 g2 b5 (Tue) 8:00-10:00 Panel Session B: Fundamental Challenges: Key Interfaces of Materials and Mechanics in Heterogeneous Materials (Chair: Esteban Busso) (Auditorium) 10:20-12:20 a6 f2 o2 a7 b6

May 25 8:00-10:00 e1 f3 i m1 r1 (Wed) 8:00-10:00 Panel Session C: Molecular and cellular biomechanics (Chair: Huajian Gao) (Auditorium) 10:20-12:20 f4 j m2 r2

10:20-11:55 Panel Session D: Multiscale Mechanics Issues in Lithium Battery (Auditorium) 12:00-12:30 HMM/ICHMM Prospective Lecture (1): Huajian Gao (Chair: Jinghong Fan, Auditorium) 13:30-16:00 e2 f5 q1 h2 r3

May 26 8:00-10:00 e3 f6 p1 q2 n1 (Thu) 8:00-10:00 Panel Session E: Fundamental Challenges: Time-Scale Issues in Atomistic Modeling (Chair: William Curtin) (Auditorium)

3/45 10:20-12:20 e4 k p2 q3 n2

13:30-15:00 HMM and ICHMM Prospective Lectures and Conference Summary: Lecture (2): Yilong Bai, Lecture (3): Esteban Busso ( Chair: D.L. McDowell) (Auditorium)

PROGRAM OF PANEL SESSIONS

Outline of Panel Sessions Program : Approximately, the first hour for panelist presentations and the second hour for discussions.

1. First hour: brief introductions or presentations by panelists including time for questions and brief comments. 2. Second hour: open discussions and interaction between panelists and audience.

Notes and ground rules for the participants:

1. Introductory comments are limited to a 7-10 minutes, so that there is an extended period for round table discussion with the audience, during which slides and extended responses can be made. 2. Panelists will give state-of-the-art examples of the methods that used or recommended for use, and a final slide on “Challenges and Opportunities” to frame discussions.

Panel Session A: Fundamental Challenges: Crystal Plasticity of Microstructures (13:40-15:40, Monday, May 23)

What are strengths and weaknesses of crystal plasticity in modeling realistic microstructures? What are promising future developments to pursue? How can crystal plasticity be utilized in materials development and design?

Participants D.L. McDowell (Chair) Regents’ Professor F.P.E. Dunne Woodruff School of Mechanical Engineering Professor School of Materials Science and Engineering Department of Engineering Science Georgia Tech University of Oxford Atlanta, GA 30332-0405 USA Parks Road 404-894-5128 Oxford [email protected] OX1 3PJ UK P. Gumbsch [email protected] Prof. Dr. rer. Nat. Institute for Applied Materials IAM, Karlsruhe H. Zbib Institute of Technology (KIT), Director and Professor Engelbert-Arnold-Straße 4 School of Mechanical and Materials Engineering 76131 Karlsruhe Washington State University Germany PO BOX 642920 [email protected] Pullman, WA 99164-2920

4/45 [email protected] Proposed Schedule and topics for Panel A:

Time Speaker Topic

13:40-13:55 McDowell Introductory comments regarding some of the missing elements in current state-of-the art in crystal plasticity of materials with microstructure.

13:55-14:10 Gumbsch Comparison of discrete dislocation and continuum crystal plasticity; avenues for improvement.

14:10-14:25 Zbib Multiscale modeling aspects, including discrete dislocation to continuum crystal plasticity.

14:25-14:40 Dunne Failure mechanisms and crystal plasticity. Deformation mechanisms and model requirements.

14:40-15:40 All Open discussion with audience

Panel Session B: Fundamental Challenges - Key Interfaces of Materials and Mechanics in Heterogeneous Materials (8:00-10:00, Tuesday, May 24) Participants Esteban Busso (Chair) FRANCE Professor of Mechanics of Materials Telephone (Work): 33.1.60.76.30.56 Director of the Materials Centre Fax: 33.1.60.76.31.50 Centre des Matériaux E-Mail: [email protected] Mines Paris, Paristech CNRS UMR 7633 Scott X. Mao BP 87 Professor F-91003 Evry Cedex, France University of Pittsburgh +33 1 60 76 30 01 Department of Mechanical Engineering [email protected] And Materials Science Lei Lu 3700 O'Hara Street Professor PITTSBURGH PA Shenyang National Laboratory for Materials Telephone (Work): 412.624.9602 Science Fax: 412.624.4866 Institute of Metal Research, Chinese Academy of E-Mail: [email protected] Sciences Shenyang 110015, China Huajian Gao 86-24-2390-6826; Professor Fax: +86-24-2399-8660 Brown University E-mail: [email protected] School of Engineering Georges Cailletaud 610 Barus and Holley Professor 182 Hope Street Mines Paris-Tech PROVIDENCE Rl 02906 Centre Des Materiaus Telephone (Work): 401.863.2626 Cnrs-Umr 7633, Bp 87 Fax: 401.863.9025 EVRY CEDEX 91003 E-Mail: [email protected]

5/45 Panel Session C: Molecular and cellular biomechanics (8:00-10:00, Wednesday, May 25) Participants Huajian Gao (Chair) Beijing 100081 Professor Telephone (Work): 86.10.6891.8309 Brown University Fax: 86.10.6891.2735 School of Engineering [email protected] 610 Barus and Holley 182 Hope Street Xiqiao Feng PROVIDENCE Rl 02906 Professor Telephone (Work): 401.863.2626 Tsinghua University Fax: 401.863.9025 [email protected] E-Mail: [email protected] C.T. Lim Linhong Deng Professor Professor National University of Singapore Key Labotatory of Biorheological Science and Division of Bioengineering Technology, 9 Eng. Drive 1 Ministry of Education, SINGAPORE 117576 College of Bioengineering, SINGAPORE Chongqing University, Telephone (Work): 65.651.67801 174 Shapingzhengjie St., Fax: 65.677.91459 Shapingba, E-Mail: [email protected] Chongqing, 400044, Baohua Ji China Professor Telephone: +86-2365112670 Beijing Institute of Technology Fax: +86-23-65112877 Department of Applied Mechanics [email protected] Zhong Guan Cun South Road 5 Panel Session D: Multiscale Mechanics Issues in Lithium Battery (10:20-12:00, Wed, May 25) Participants Jinghong Fan (Co-Chair) Staff Research Scientist Professor Chemical Sciences and Materials Systems Lab Kazio Inamori School of Engineering General Motors Alfred University Mail Code: 480-106-400 New York, 14802, USA 30500 Mound Rd, Warren, MI, USA, 48090-9055 (607) 871-3781 Tel: (248) 912-8608 Fax: (607) 871-2348 Fax: (586) 986-9260 [email protected] Email: [email protected] Ting Zhu (Co-Chair) W. A. Curtin Associate Professor Elisha Benjamin Andrews Professor Woodruff School of Mechanical Engineering Division of Engineering Georgia Institute of Technology Brown University 801 Ferst Dr., N.W. Providence, RI 02912 USA Atlanta, GA 30332 401-863-1418 404-894-6597 [email protected] [email protected] Huajian Gao Yue Qi Professor

6/45 Brown University Min Zhou School of Engineering Professor 610 Barus and Holley The Woodruff School of Mechanical Engineering 182 Hope Street Georgia Institute of Technology PROVIDENCE Rl 02906 Atlanta, GA 30332-0405, U.S.A. Telephone (Work): 401.863.2626 Tel: +1 404-894-3294 Fax: 401.863.9025 Fax: +1 404-894-0186 E-Mail: [email protected] [email protected] Proposed topic of discussion: 10:20-11:00 Special keynote lecture Introduction of multiscale mechanics issues of Li-ion battery 11:00-11:50 Topics for cross discussion: How materials change and degrade inside battery? How to bridge the gap between DFT and Newman’s model? How to include plastic deformation, defects, chemistry into electrode failure modeling? How to understand fracture in electro-chemical environment? What new chemo-mechanical frame work needs to be established? How to describe phase evolution: Li plating, SEI growth, SEI cracking ... If we can predict material life, can we predict battery life?

Tentative schedule is given as follows: 11:00-11:10 Curtin: Issues in Coupling Chemistry and Mechanics 11:10-11:20 Zhou Min: How to include plastic deformation, defects, chemistry into electrode failure modeling? 11:20-11:30 Ting Zhu: How to develop a fundamental understanding by integrating in situ experiments with mechanistic modeling. 11:30-11:40: H. Gao 11:30-11:40: J. Fan Concluding remarks.

Panel Session E: Fundamental Challenges: Time-Scale Issues in Atomistic Modeling (8:00-10:00, Thursday, May 26)

Participants W. A. Curtin (Chair) Elisha Benjamin Andrews Professor D. Warner Division of Engineering Assistant Professor Brown University Department of Civil and Environmental Providence, RI 02912 USA Engineering 401-863-1418 Cornell University [email protected] Ithaca, NY 14853 607-255-7155 J. F. Molinari [email protected] EPFL-ENAC-LSMS T. Zhu Bâtiment GC - A2 Associate Professor Station 18 Woodruff School of Mechanical Engineering CH 1015 – Lausanne, Switzerland Georgia Institute of Technology (41) 21 693 2411 801 Ferst Dr., N.W. [email protected] Atlanta, GA 30332

7/45 404-894-6597 [email protected] Proposed Schedule and topics for Panel E:

Time Speaker Topic

8:00-8:15 Curtin Introductory comments on the “time scale” challenge in materials science, from atoms to continuum.

8:15-8:30 Zhu Accelerated methods via Nudged Elastic Band method and its relatives: Reaction pathway sampling in nanomechanics and Transition state theory; NEB for Stress Driven Problems and & novel developments (free-end NEB, nip-tuck methods); Stress-dependent activation energy and activation volume; Activation entropy and Meyer-Neldel compensation rule; Applications and Perspectives looking ahead.

8:30-8:45 Warner General Transition-State-Theory theory and common approaches that fall under the TST umbrella: exact-TST, variational-TST, PE-TST, harmonic-TST, and simplified harmonic-TST; quantitative evaluation of these within an example, and elucidation of the important role of activation entropy in some problems.

8:45-9:00 Molinari Multiscale and Continuum Methods This last short-presentation will cover time-accelerated methods at the continuum scale. Multiscale approaches will be discussed, including atomistic to continuum and continuum to continuum (otherwise known as FE^2). Several simple strategies are reviewed for time scaling at the continuum. Extrapolation methods to monitor slow time-evolution of damage and coarse-graining of cohesive modeling for dynamic fracture applications are chosen as illustrative examples

9:00-10:00 All Open discussion with audience

8/45 PROGRAM OF 54 SESSIONS

Session a1: Metals: Nanomechanics and Nanostructure (1): Strengthening mechanism May 23 (Mon) 8:00-10:00 Room 4 Co-Chairs: Tongyi Zhang, Hong Kong University of Science and Technology A. Misra, Los Alamos National Laboratory, Los Alamos, USA C0722 Keynote lecture 8:00-8:30 Strengthening Mechanism in Metals with Nano-scale Twins L. Lu 1,* and K. Lu1 1Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110016, P.R. China. *Email: [email protected] B0385 Keynote lecture 8:30-9:00 Twin Boundaries in Nanowires: Knowledge-based Fabrication & Mechanics Y.F. Zhang, J. Wang, L. Zhou and H. Huang* Department of Mechanical Engineering, University of Connecticut, Storrs, CT 06269, USA; Y. F. Zhang now at Idaho National Laboratory; J. Wang now at Los Alamos National Laboratory. *Email: [email protected] B0434 Keynote lecture 9:00-9:30 Deformation Twinning Mechanisms in FCC and HCP Metals J. Wang*1, I. J. Beyerlein1, N. Mara1, A. Misra1, C. N. Tome1 1MST-8, Los Alamos National Laboratory, Los Alamos, NM 87545, USA. *Email: [email protected] B0402 9:30-9:50 The Influence of Linear Defect on Twin Movement under a Shear Loading in Magnesium Single Crystal H.G. Qi*1, Y.F. Guo1, J. Mosler2, M. Homayonifar2 1Institute of Engineering Mechanics, Beijing Jiaotong University, Beijing, 100044, P. R. China; 2Helmholtz- Zentrum Geesthacht, Institute of Materials Research, Materials Mechanics, D-21502 Geesthacht, Germany. *Email: [email protected] 9:50-10:00 Cross discussion

Session a2: Metals: Nanomechanics and Nanostructure (2): strengthening mechanism by simulation May 23 (Mon) 10:20-12:20 Room 4 Co-Chairs: K. Lu, Inst. of Metal Research, Chinese Academy of Sciences M.G. Lagally, University of Wisconsin-Madison, USA B0277 Keynote lecture 10:20-10:50 Probing Mechanical Properties of Nanostructured Materials via Large Scale Molecular Dynamics Simulations H.J. Gao*1

9/45 1School of Engineering, Brown University, USA. *Email: [email protected] B0258 Keynote lecture 10:50-11:20 Resolving Deformation Modes of Nanocrystalline Metals using Continuum Metrics Based on Atomistic Simulations G.J. Tucker1, S. Tiwari1, J.A. Zimmerman2, and D.L. McDowell*1 1School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA, 30332, USA; 2Sandia National Laboratories, Livermore, CA, 94550, USA. *Email: [email protected] Keynote lecture 11:20-11:50 Understanding strengthening effects of slip transmission at coherent twin boundaries Zhaohui Jin Shanghai Jiao Tong University, Shanghai, China. Email: [email protected] G0390 11:50-12:10 Simulation on Tensile Mechanical Properties of Single Crystal Copper Nanostructures with Different Hole Configurations Y.C. Liang1, Z. Tong*1, Q. S. Bai1, J. X. Chen1 and Z. G. Wang1 1Centre for Precision Engineering, Harbin institute of technology, Hei Longjiang, Harbin, 150001, China. *Email: [email protected] 12:10-12:20 Cross Discussion

Session a3: Metals: Nanomechanics and Nanostructure (3) May 23 (Mon) 13:40-15:40 Room 4 Co-Chairs: Huajian Gao, Brown University, USA Peidong Wu, McMaster University, Canada B0727 Keynote lecture 13:40-14:10 Discrete plasticity in sub-ten-nanometer-sized Au crystals Scott X. Mao*, He Zheng, C. R. Weinberger, Jian Yu Huang Department of Mechanical Engineering & Materials Science, Univerisity of Pittsburgh, USA. *Email: [email protected] N0774 Invited speech 14:10-14:35, Mechanics of Natural Honeycomb as Paradigm for Design of Unconventional Cellular Materials Kai Zhang1, Huiling Duan1, Jianxiang Wang1*, Bhushan L. Karihaloo2 1LTCS, and Department of Mechanics and Aerospace Engineering, College of Engineering, Peking University, Beijing 100871, P. R. China; 2School of Engineering, Cardiff University, Queen’s Buildings, The Parade, Cardiff CF24 3AA, United Kingdom. *Email: [email protected] A0523 14:35-14:53 Atomistic Simulation of Deformation and Failure Mechanism for Intermetallic

Compound Mg17Al12 X.G. Zeng*1, H.Y. Chen1, W.B. Xu1, R.P. Xu1 1College of Architecture and Environment, Sichuan University, Chengdu, SiChuan 610065, P.R. China. *Email: [email protected] B0766 14:53-15:11 The Deep Link between FCC and BCC Metals Z.W. Shan*1 1Center for Advancing Materials Performance from the Nanoscale (CAMP-Nano) & Hysitron Applied Research Center in China (HARCC), State Key Laboratory for Mechanical Behavior of Materials, Xi’an Jiaotong University, Xi’an 710049, P.R. China. *Email: [email protected] B0327 15:11-15:30 Atomistic Study of Tip Radius Eddect on Nanoindentation on Nanocrystalline Cu J.J. Zhang1, T. Sun*1, and Y.D. Yan1 1Center for Precision Engineering, Harbin Institute of Technology, Harbin 150001, China. *Email: [email protected] 15:30-15:40 Cross discussion

Session a4: Metals: Nanomechanics and Nanostructure (4)

10/45 May 23 (Mon) 16:00-18:10 Room 3 Co-Chairs: A. N. Cormack, Alfred University, USA Luke L. Hsiung, Lawrence Livermore National Lab., USA B0726 Keynote lecture 16:00-16:30 Crystalline Semiconductor Nanomembranes: A Materials Platform with Unique Mechanical Properties M.G. Lagally*, Feng Liu, K.T. Turner, and J.A. Rogers Department of Materials Science and Engineering University of Wisconsin-Madison, USA. *Email: [email protected] E0707 Keynote lecture 16:30-17:00 Developing Multi-scale Model to Study Atypical Crystal Plastic Behavior Y.N. Cui1, Y. Gao1, Z.L. Liu1 and Z. Zhuang1,* 1Applied Mechanics Lab., School of Aerospace, Tsinghua University, Beijing 100084 China. *Email: [email protected] A0696 Invited lecture 17:00-17:25 Finite Element Analysis of the Contact between Rough Surfaces V. Yastrebov, J. Durand, H. Proudhon and G. Cailletaud* MINES ParisTech, France. *Email: [email protected] R0334 17:25- 17:42 Biased Sampling in Volume Elements for Evolutionary Structure-Property Relations David L. McDowell1 1School of Materials Science and Engineering Woodruff School of Mechanical Engineering Georgia Institute of Technology, Atlanta, GA 30332-0405 B0485 17:42-18:00 Influence of Strain Rate and Temperature on Interface Misfit Dislocation Networks in Ni-based Superalloys W.P. Wu*1,2, Y.F. Guo3, and Y.S. Wang3 1Department of Engineering Mechanics, Wuhan University, Wuhan 430072, China; 2Department of Engineering Mechanics, University of Wuppertal, Wuppertal 42097, Germany; 3Institute of Engineering Mechanics, Beijing Jiaotong University, Beijing 100044, China. *Email: wpwubjtu @ 126.com 18:00-18:10 Cross discussion

Session a5: Metals: Nanomechanics and Nanostructure (5) May 24 (Tue) 8:00-10:00 Room 4 Co-Chairs: Yunzhi Wang, Ohio State University, USA G. Z. Kang, Southwest Jiaotong University R0363 Keynote lecture 8:00-8:30 Cyclic Deformation Response of ARBed Copper with Composite-natured Ultra-fine- Microstructures and its Comparison with Cyclic Deformation Response of ECAPed Copper Z.R. Wang*1 and Charles Kwan1 1Department of Materials Science and Engineering, University of Toronto, 184 College St., Toronto, Canada, M5S 3E4. *Email: [email protected] E0644 Invited lecture 8:30-8:55 Interfaces in Size-Dependent Crystal Plasticity S. D. Mesarovic1,*, R. Baskaran1 1School of Mechanical and Materials Engineering, Washington State University, PO Box 642920, Pullman, WA, 99164-2920, USA. *Email: [email protected] #0623 8:55-9:15 Size and dose dependent radiation damage in Cu/V nanolayers X. Zhang*, E.G. Fu, H. Wang, and L. Shao, A. Misra Texas A&M University, USA. *Email: [email protected] C0579 9:15-9:35 The Influences of Residual Surface Stress on the Thermo-elastic Bending of Simply Supported Nanoplates Z.Q. Wang1, and Y.P. Zhao*1 1School of Engineering and Technology, China University of Geosciences, Beijing 100083, China; 2State Key

11/45 Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, China. *Email: [email protected] E0519 9:35--9:55 Molecular Dynamics Simulation of Microstructure Evolution and Deformation Mechanism for X80 Steel R.P. Xu1, X.G. Zeng*1, A.L. Yao2, W.B. Xu1 , H.Y. Chen1 1College of Architecture and Environment, Sichuan University, Chengdu, SiChuan 610065, P.R. China; 2Southwest Petroleum University, Chengdu SiChuan 610500, P.R. China. *Email: [email protected] 9: 55-10:05 Cross Discussion

Session a6: Metals: Nanomechanics and Nanostructure (6) May 24 (Tue) 10:20-12:20 Room 2 Co-Chairs: D.L. McDowell, Georgia Institute of Technology, USA L. Lu, Inst. of Metal Research, Chinese Academy of Sciences K0582 Keynote lecture 10:20-10:50 Molecular Dynamics Simulation of Plastic Deformation of Metallic Glass at Strain Rates Varying Between 10-3 s-1 to 101 s-1 Natraj Yedla and Sudipto Ghosh*1 1Natraj Yedla Materials Modeling Lab, Department of Metallurgical and Materials Engineering, IIT Kharagpur, Kharagpur 721302, West Bengal, India. *Email: [email protected] A0505 Keynote lecture 10:50-11:20 Modeling Displacive-Diffusional Coupling in Solid State Processes Sanket Sarkar1, Bill Cox1, Ju Li2 and Yunzhi Wang1, 1Department of Materials Science and Engineering, The Ohio State University, Columbus, Ohio 43210, USA; 2Department of Materials Science and Engineering, University of Pennsylvania, 3231, Walnut Street, Philadelphia, PA 19104, USA. *Email: [email protected] state.edu J0661 11:20-11:40 Design of Microstructure for Porous Material with Maximum Bulk Modulus X. Huang*1, A. Radman and Y.M. Xie 1School of Civil, Environmental and Chemical Engineering, RMIT University. GPO Box 2476V, Melbourne 3001, Australia. *Email: [email protected] B0543 11:40-11:57 Molecular Dynamics Simulation of the Deformation of Al nanopillars S. Xu*1 and Y.F. Guo1 1Institute of Engineering Mechanics, Beijing Jiaotong University, Beijing 100044, China. *Email: [email protected] C0694 11:57-12:14 Orientation Dependence of the Torsional Behavior of Copper Nanowires: an Atomistic Simulation Study H.Q. Lu*1, J.Q. Zhang2, and J. Fan3 1Shanghai Institute of Applied Mathematics and Mechanics, Shanghai University, Shanghai 20072, China; 2Department of Mechanics and Shanghai Key Laboratory of Mechanics in Energy and Environment Engineering, Shanghai University, Shanghai 200444, China; 3Alfred University, USA and Chongqing University, China. *Email: lhquan @ graduate.shu.edu.cn 12:14-12:24 Cross discussion

Session a7: Metals: Nanomechanics and Nanostructure (7) May 24 (Tue) 10:20-12:20 Room 5 Co-Chairs: Zhuo Zhuang, Tsinghua University Sudipto Ghosh, Natraj Yedla Materials Modeling Lab, India B0544 10:20-10:37 Detonation of Water-Gel Explosive

12/45 H.S. Zhou1, J. Xie2, X.H. Xie*3, and S.L. Yan3 1School of Medicines, Anhui University of Science and Technology, Huainan, Anhui 232001, China; 2School of Journalism, Fudan University of Science and Technology, Room 606, Building 17, GuoDing Road 440, Shanghai, 200433, China; 3School of Chemical Engineering, Anhui University of Science and Technology, Huainan, Anhui 232001, China. *Email: [email protected] B0549 10:37-10:54 Lithium Oxides from Emulsion Explosive X.H. Xie*1, X.R. Yan1, J. Xie2, S.Y. Liu1, and M.C. Yin1 1School of Chemical Engineering, Anhui University of Science and Technology, Huainan, Anhui 232001, China;2School of Journalism, Fudan University of Science and Technology, Room 606, Building 17, GuoDing Road 440, YangPu District, Shanghai, 200433, China. *Email: [email protected] B0348 10:54-11:11 Mechanics of carbon nanoscrolls X.H. Shi, N.M. Pugno and H.J. Gao* Institute of Mechanics, Chinese Academy of Sciences, China. Email: [email protected] X0514 11:11-11:28 Microvoids Pressures of Tritium and Helium-3 in Vessel Wall with Their Accessional Effects Y. H. Yin*1, Y. D. Liu1, and Y. Tan1 1Institute of Structural Mechanics, China Academy of Engineering Physics, P. O. Box 919-401, Mianyang, 621900, China. *Email: [email protected] W0759 11:28-11:45 Implementation of Stress Loading Repetitive Unit Cell Finite Element Model Wen-Guang Jiang1,* and L.J. Yan2 1School of Mechanical Engineering, Yanshan University, Qinhuangdao 066004, China; 2Quality Department, Xuzhou Construction Machinery Group, Xuzhou 221000, China. *Email: [email protected]

R0714 11:45-12:02 Fundamental principle of cyclic deformation and dislocation evolution in fcc single crystals P. Li, S.X. Li, Z.G. Wang and Z.F. Zhang* Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110016, P.R. China. *Email: [email protected] 12:02-12:20 Cross discussion

Session b1: Metals: Micromechanics and Mesomechanics (1) May 23 (Mon) 8:00-10:00 Room 6 Co-Chairs: H. Huang, University of Connecticut, USA Li Lu, National University of Singapore, Singapore X0602 Keynote lecture 8:00-8:30 Recovering the Full Dislocation Tensor from High-Resolution EBSD Microscopy Brent L. Adams*1, Thomas Hardin1 and David T. Fullwood1 1Department of Mechanical Engineering, Brigham Young University, Provo, UT 84602, USA. *E-mail: [email protected] X0758 Invited Lecture 8:30-8:55 Statistical Continuum Mechanics Formulation for Multi-Phase Reconstruction and Homogenization H. Garmestani*1, M. Baniasadi, D. S. Li, Moe Khaleel, S. Ahzi, Dept. of Materials Science and Technology, Georgia Institute of Technology, E-mail: [email protected]; B0433 Invited lecture 8:55-9:20 Atomistic Modeling of Dislocation-interface Interactions J. Wang, A. Misra*1, I. J. Beyerlein (T-3)1, A. Misra (MPA-CINT)1, S. M. Valone (MST-8)1, and T. C. Germann (T-1)1 1Los Alamos National Laboratory, Los Alamos, NM 87545, USA. *Email: [email protected] W0404 9:20-9:35 Multi-scale Analysis Method for Combined Conduction-Radiation Heat Transfer of Periodic Composites

13/45 Q.F. Zhang*1, and J.Z. Cui1 1Institute of Computational Mathematics and Science-Engineering Computing, Academy of Mathematics and System Sciences, CAS, Beijing 100190, China. *Email: zhangqf @ lsec.cc.ac.cn B0658 9:35-9:50 Properties of RF Sputtered ZnO Thin Films under Different Oxygen Flux Z.S. Guo1 1Shanghai Institute of Applied mathematics and Mechanics, Shanghai University, Shanghai 200072, China. Email: [email protected] 9:50-10:00 Cross discussion

Session b2: Metals: Micromechanics and Mesomechanics (2) May 23 (Mon) 10:20-12:20 Room 6 Co-Chairs: Xiaodong Wang, University of Alberta, Canada Faxin, Li, Peking University Q0278 Invited lecture 10:20-10:45 Micro Heterogeneous Deformation and Strain Localization Behavior in Austenitic Ferritic Duplex Stainless Steels G. Chai*1, R. Lillbacka2, and R. L. Peng3 1Sandvik Materials Technology, R&D Centre, 811 81 Sandviken, Sweden; 2FS Dynamics, Mölndalsvägen 24, 412 63 Göteborg, Sweden; 3Dept. of Management and Eng., Linköping Univ., 581 83 Linköping, Sweden. *Email: [email protected] E0516 10:45-11:02 Numerical Simulation of Crack Propagation and Deformation Mechanism around Crack Tip across Atomistic/Meso/Continuum Scales H.Y. Chen1, X.G. Zeng*1, and J.H. Fan2 1College of Architecture and Environment, Sichuan University, Chengdu, Sichuan 610065, P.R. China; 2College of Engineering, Alfred University, NY14802-1205, USA. *Email: [email protected] A0265 11:02-11:19 Phase Field Simulation of Static Recrystallization for Deformed Alloys Y.J. Gao*1, Z.R. Luo1, C.G. Huang1 1College of Physics, Guangxi University, Nanning, 530004, China. *E-mail: [email protected] E0422 11:19-11:36 Quantitative Phase-Field Modeling of the Ferrite-to-Austenite Transformation S.Y. Pan*1, M.F. Zhu1, and B.W. Krakauer2 1Jiangsu Key Laboratory for Advanced Metallic Materials, School of Materials Science and Engineering, Southeast University, Nanjing, Jiangsu 211189, China; 2AO Smith Corporate Technology Center, Milwaukee, WI, 53224 USA. *Email: [email protected] A0420 11:36-11:53 Phase Field Method Equations Derived From Thermodynamic Extremal Principle J. Svoboda*1, and F.D. Fischer2 1Institute of Physics of Materials, Academy of Sciences of the Czech Republic, Žižkova 22, CZ-616 62, Brno, Czech Republic; 2Institute of Mechanics, Montanuniversität Leoben, Franz-Josef-Straße 18, A-8700 Leoben, Austria. *Email: [email protected] W0416 11:53-12:10 Effect of the Material Absorptive to Laser on Temperature and Stress Field during Laser Braze Welding Processing Yan Yixia1,*, J. Mo1 and Z.M. Hao1 1Institute of Structural Mechanics, CAEP, 621900, P.R. China. *Email: [email protected] 12:10-12:20 Cross discussion

Session b3: Metals: Micromechanics and Mesomechanics (3)** May 23 (Mon) 13:40-15:40 Room 6 Co-Chairs: Brent L. Adams, Brigham Young University, USA

14/45 G. Cailletaud, MINES ParisTech, France E0279 Keynote lecture 13:40-14:10 Plasticity in Confined Volumes Hussein Zbib School of Mechanical and Materials Engineering, Washington State University, Pullman, WA, 99164-2920. Email: [email protected] V0365 Invited lecture 14:10-14:35 Dynamic and Nonlinear Behaviour of Deformation and Fracture of Quasicrystalline Materials T. Y. Fan1,* and Z. Y. Tang2 1Department of Physics, Beijing Institute of Technology, Beijing 10081, China; 2Southwest Jiaotong University Hope College, Nanchong, Sichuan 637900, China. *Email: [email protected] R0392 14:35-14:55 Activated Slip Systems in Copper Polycrystal under Multiaxial Fatigue Loadings K. Agbessi*1, N. Saintier1, and T. Palin-Luc1 1Arts et Métiers ParisTech, I2M, UMR CNRS 5295, Université de Bordeaux, Esplanade des Arts et Métiers, F- 33405 Talence Cedex, France. *Email: komlan.agbessi@ ensam.eu C0463 14:55-15:15 Elastic Analysis of Interaction between a Screw Dislocation and a Coated Nano- inhomogeneity Incorporating Interface Stresses D.D. Zhang1 and Z.Y. Ou*1 1School of Science, Lanzhou University of Technology, Gansu, Lanzhou 730050, China. *Email: [email protected] H0586 15:15-15:35 Numerical Study of Mechanical Anisotropy of Extruded Magnesium Alloy AZ31 H. Wang1, Y. Wu2, P.D. Wu*1, and K.W. Neale3 1Department of Mechanical Engineering, McMaster University, Hamilton, Ontario L8S 4L7, Canada; 2State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology, Xuzhou, Jiangsu 221008, China; 3Faculty of Engineering, University of Sherbrooke, Sherbrooke, Quebec J1K 2R1, Canada. *Email: [email protected] 15:35-15:45 Cross discussion

Session b4: Metals: Micromechanics and Mesomechanics (4) May 23 (Mon) 16:00-18:10 Room 6 Co-Chairs: Hussein Zbib, Washington State University, USA W. Tong, Southern Methodist University, USA A0497 Keynote lecture 16:00-16:30 Experimental and Crystal Plasticity Investigations of Initial Stress in Thermally Treated Titanium and Nickel Alloys R. Kiwanuka, F.P.E. Dunne* Department of Engineering Science, University of Oxford, Parks road, Oxford OX1 3PJ, UK. *Email: [email protected] H0581 Invited lecture 16:30-16:55 On the Interaction of Material Heterogeneity and Geometric Discontinuity in Serrated Plastic Flows W. Tong*1, Y. Xuan1, and H. Yao1 1Department of Mechanical Engineering, Southern Methodist University, Dallas, Texas, USA. *Email: [email protected] N0692 16:55-17:15 Vibration Analysis of Embedded Microtubules within Elastic Medium M. Taj*1, J.Q. Zhang1,2 and Z.L. Hu1 1Department of Mechanics and Shanghai Institute of Applied Mathematics and Mechanics, Shanghai University Shanghai 200072, China; 2Shanghai Key Laboratory of Mechanics in Energy and Environment Engineering, Shanghai 200072, China. *Email: [email protected] A0750 17:15-17:35 The Pressure Dependence of Elastic Stiffness of Granular Materials: A Binary Model in Effective Medium Theory

15/45 W. Zheng*1,2, S.L. Xu2, S.S. Hu2 1Department of modern mechanics, CAS Key Laboratory Mechanical Behavior and Design of Materials; 2University of Science and Technology of China, Hefei, Anhui 230026, China. *Email: [email protected](W. Zheng), [email protected](S.L. Xu) J0351 17:35-17:55 Polygonal Inhomogeneity in Anisotropic Full-Planes K.Y. Xu1,* and L.G. Sun2 1Department of Mechanics, Shanghai key laboratory of Mechanics in Energy Engineering, Shanghai University, Shanghai 200444, China; 2Shanghai Institute of Applied Mathematics and Mechanics, Shanghai University, Shanghai 20072, China. *Email: [email protected] 17:55-18:10 Cross discussions

Session b5: Metals and Synthetic Cellular Materials: Micromechanics and Mesomechanics May 24 (Tue) 8:00-10:00 Room 6 Co-Chairs: F.P.E. Dunne, University of Oxford, UK X. H. Peng, ChongQing University I0626 Keynote lecture 8:00-8:30 Understanding of Interface Structures, Defects, and Mechanical Properties at General Fcc-bcc Interfaces Using “Tunable” Potentials X.Y. Liu*1, R.G. Hoagland1, M.J. Demkowicz2, J. Wang1, M. Nastasi1, A. Misra1, and J.P. Hirth1 1Los Alamos National Laboratory, Los Alamos, NM 87545, USA; 2Department of Materials Science and Engineering, Massachusetts Institute of Technology, Cambridge, MA 02139, USA. *Email: [email protected] G0773 8:30-8:50 Effect of electropulse on thermomechanical processing of steels R.S. Qin Department of Materials, Imperial College London, UK. Email: [email protected] V0720 8:50-9:10 Material-technological Modeling of Various Holding Times at the Partitioning Temperature in AHSS with Different Alloying Strategies B. Masek1,*, H. Jirkova1, L. Kucerova 1and D. Klauberova1 1University of West Bohemia in Pilsen, Research Centre of Forming Technology, Univerzitni 22, CZ-306 14 Pilsen, Czech Republic. *Email: [email protected] A0413 9:10-9:30 Mesh Generation of Nomex Honeycomb Material J. Sjölund*1 and J. Freund1 1Department of Applied Mechanics, Aalto University, Puumiehenkuja 5 A, 02150 Espoo, Finland. *Email: [email protected] Q0666 9:30-9:50 Mechanical Behavior of PE Cylindrical Shells under Axial Impact Load D. Li*1, J.L. Tao1, Y. Peng1, and Y. Fu1 1School of Civil Engineering and Architecture, Southwest University of Science and Technology, Mianyang, Sichuan 621010, China. *Email: [email protected] 9:50-10:00 Cross discussion

Session b6: Metals and Synthetic Cellular Materials: Micromechanics and Mesomechanics May 24 (Tue) 10:20-12:20 Room 6 Co-Chairs: Derek Warner, Cornell University, USA Yi Kong, University of Sydney, Australia G0625 Keynote lecture 10:20-10:50 Ultrasonic Scattering in Polycrystalline Materials under Applied Loads J. A. Turner1,* 1Department of Engineering Mechanics, University of Nebraska-Lincoln, W317.4 NH, Lincoln, NE 68588 USA. *Email: [email protected]

16/45 N0419 10:50-11:10 Validation of a Cellular Micromechanical Model A. Karako*1, J. Freund1 1Aalto University School of Science and Technology, Finland. *Email: [email protected] N0522 11:10-11:30 Micro-inertia Effect and Dynamic Poisson’s Ratio of Closed-cell Metallic Foams under Compression C.F. Wang1, Z.J. Zheng*1, and J.L. Yu1 1CAS Key Laboratory Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei, Anhui 230026, China. *Email: [email protected] A0477 11:30-11:50 Electromagnetic Properties of Sandwich Materials with Hexagonal Honeycomb Core X.G. Tang1, W.H. Zhang*1, D.H. Bassir2 1Key Laboratory of Contemporary Design & Integrated Manufacturing, Northwestern Polytechnical University, Xi’an, Shaanxi 710072, China; 2Consulat général de France à Canton, Guangzhou 510098, China. *Email: [email protected]

N0598 11:50-12:10 Deformation Characteristic of Metal Foam under Different Strain Rate and Temperature P.F. Wang1, S.L. Xu1,* and S.S. Hu1 1CAS Key Laboratory Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei, Anhui 230026, China. *Email: [email protected], [email protected] 12:10-12:20 discussion

Session c1: Metals: Multi-Scale and Multi-Physics Modeling (1) May 23 (Mon) 8:00-10:00 Room 5 Co-Chairs: Y. L. Bai, Institute of Mechanics, the Chinese Academy of Science Shaofan Li, University of California at Berkeley, USA A0252 Keynote lecture 8:00-8:30 Network Interfacial Dynamics of Microstructure Evolution Giacomo Po, Benjamin Ramirez, Tamer Crosby, Can Erel, John Nguyen, Qiyang Hu, T.V. Singh and Nasr M. Ghoniem UCLA, USA. Email: [email protected] A0331 Keynote lecture 8:30-9:00 On the Mechanism of Anomalous Slip in BCC Metals Luke L. Hsiung*1 1Physical and Life Sciences Directorate, Lawrence Livermore National Laboratory, Livermore, CA 94551, U.S.A. *Email: [email protected] E0313 9:00-9:17 An Elastic Constitutive Model for Frequency-dependent Anisotropy in the Medium with Multi-scale Fractures K.F. Han*1 1Institute of Optoelectronic Science and Engineering, National University of defense Technology, Changsha, Hunan 410073, P. R. China. *Email: [email protected] A0366 9:17-9:34 A Modified Micromechanical-based Model for Characterizing Magneto-mechanical Behaviors in NiMnGa Alloys X.Z. Wang*1, R.B. Wei1, Q. Hu1, and F. Li1 1Key Lab. Mech. on Disasters and Environment in Western China，TMEC, College of Civil Engineering and Mechanics, Lanzhou University，Lanzhou, Gansu 730000, China. *Email: [email protected] B0580 9:34-9:51 Nanoscale Cutting Simulation of Single Crystal Copper Based on Multiscale Method Q. S. BAI*1, H. M. Pen1, and Y. C. Liang1 1School of Mechanical and Electrical Engineering, Harbin Institute of Technology, Harbin, 150001, China. *Email: [email protected] 9:51-10:01 Cross discussion

17/45 Session c2: Metals: Multi-Scale and Multi-Physics Modeling (2) May 23 (Mon) 10:20-12:20 Room 5 Co-Chairs: Nasr M. Ghoniem, UCLA, USA Yao Shen of Shanghai Jiao Tong University E0762 Keynote lecture 10:20-10:50 Coupling Quantum and Continuum Scales to Predict Dislocation Nucleation from an Aluminum Crack Tip in the Presence of Oxygen and Hydrogen A. K. Nair, R.J. Zamora, R.G. Hennig, and D. H. Warner* School of Civil and Environmental Engineering, Cornell University, Ithaca NY. *Email: [email protected] F0280 Keynote lecture 10:50-11:20 A Multiscale Method of Plasticity Enabling Dislocations to Seamlessly Pass Scale Interfaces J. Fan*1, R.J. Stewart1 1Kazuo Inamori School of Engineering, Alfred University, Alfred, New York, 14802, USA. *Telephone: 607 8713781; fax: 607 8712348; *E-mail:[email protected] B0466 Keynote lecture 11:20-11:50 Multimodal Nanostructured Titanium Using Several Plastic Deformation C. Wen1,*, D.K. Yang, Y.C. Li2 and P.D. Hodgson2 1IRIS, Faculty of Engineering and Industrial Sciences, Swinburne University of Technology, Hawthorn, Victoria 3122, Australia; 2ITRI, Deakin University, Geelong, Victoria 3217, Australia. *Email: [email protected] 11:50-12:10 An Embedded Atom Potential Based Cohesive Finite Element Method and Simulations of Fracture in Polycrystalline Materials, Shaofan Li Applied and Computational Mechanics, University of California at Berkeley, [email protected] 12:10-12:20 Cross discussion

Session c3: Metals: Multi-Physics Modeling, Material Design and Structure Behavior May 23 (Mon) 13:40-15:40 Room 5 Co-Chairs: Z.R. Wang, University of Toronto, Canada D. Mesarovic, Washington State University, USA F0318 Keynote lecture 13:40-14:10 Multi-physics Analysis of Nno-components by First-Principle Simulation T. Kitamura*1, T. Shimada1, and T. Sumigawa1 1Department of Mechanical Engineering &Science, Kyoto University, Kyoto, 606-8501, Japan. *Email: [email protected]

I0376 14:10-14:27 First-Principle Shear Tests of Ni(111)/α-Al2O3(0001) Interfaces X.C. Guo* and F.L. Shang Xi’an Jiaotong University, Xi’an Shangxi, China. *Email: [email protected] J0426 14:27-14:44 Strengthening Mechanisms and Yield Strength Reduction of a Hot Rolled Enameling Steel M. Jiang1,*, X.F. Yang1, S.Y. Pan1, B.W. Krakauer2 and M.F. Zhu1 1Jiangsu Key Laboratory for Advanced Metallic Materials, School of Materials Science and Engineering, Southeast University, Nanjing, 211189, P.R. China; 2AO Smith Corporate Technology Center, Milwaukee, WI, 53224 USA. *Email: [email protected] E0638 14:44-15:01 Nonlinear Analysis of New Type Concrete-filled Steel Tubular Column-beam Joint S. Gu1,*, Y.P. Chu2 and J. Chen2 1School of Civil Engineering, Southwest Jiaotong University, Chengdu,610031, China; 2School of Civil Engineering and Architecture, Southwest University of Science and Technology, 621010, China. *Email:

18/45 [email protected] G0680 15:01-15:18 Some Experimental Investigations on Laser Welding of AISI 904 L Stainless Steel Joints S. Paulraj1,* and M. Y.A. Jaleel1 1Department of Production Engineering, National Institute of Technology, Tiruchirappalli 620015, Tamil Nadu, India. *Email: [email protected] N0609 15:18-15:35 Impact Behaviour and Energy Dissipation in Metallic Thin-walled Hollow Spheres P. Li*1, N. Petrinic2, and C.R. Siviour2 1School of Mechanical and Aerospace Engineering, Nanyang Technological University, 639798, Singapore; 2Department of Engineering Science, Oxford University, UK. *Email: [email protected] 15:35-15:45: Cross discussion

Session d1: Metals: Fatigue, Damage, Failure and Environmental Effects (1) May 23 (Mon) 8:00-10:00 Room 2 Co-Chairs: Haibo Chen, University of Science and Technology of China X.Y. Liu, Los Alamos National Laboratory, USA R0547 Keynote lecture 8:00-8:30 Fatigue Behavior and Short Crack Growth in Ferritic-pearlitic-bainitic Steel J. Polák 1,* and M. Petrenec1 1Institute of Physics of Materials Academy of Sciences, Žižkova 22 61662 Brno Czech Republic. *Email: [email protected] V0672 Invited lecture 8:30-8:55 Observation of Three-dimensional Crack Path in a Dual Phase Steel F. Zeismann1, L. Zellmer1, P. Pitz1, Y. Motoyashiki-Besel1, H. Toda 2and A. Brückner-Foit1,* 1Institute for Materials Engineering, University of Kassel, Moenchebergstrasse 3, D-34109 Kassel, Germany; 2Toyohashi Univ. of Technology, Department of Mechanical Engineering, Toyohashi, Aichi 441-8580, Japan. *Email: [email protected] R0618 8:55-9:11 Low-cycle Fatigue Behaviors of Small Cracks of Glidcop Al-15 Y. Yin1,*, H.B. Chen 1and W.L. Xiao1 1CAS Key Laboratory Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei, Anhui 230026, China. *Email: [email protected] R0380 9:11-9:17 The Mechanism of Fatigue Crack Initiation of 2024-T3 and 2524-T34 Aluminum Alloys T. Li1,* and Q.Y. Wang2 1College of Civil Engineering and Architecture, South west Univ. of Science and Technology, Mianyang, 621000, China; 2Department of Engineering Mechanics, Sichuan University, Chengdu, 610065, China. *Email: [email protected] A0671 9:17-9:33 Crack initiation in intermetallic TiAl-alloy under fatigue loading W. Wessel, B. Bode, E. Merdian, A. Brückner-Foit, Institute for Materials Engineering, University of Kassel, Moenchebergstrasse 3, D-34109 Kassel, Germany *Email: [email protected] R0698 9:33-9:50 Stress Intensity Factors of Periodic Crack Arrays with Eigen COD Formulation of Boundary Integral Equation Z. Guo*1 and H. Ma2 1Shanghai Institute of Applied Mathematics and Mechanics, Shanghai University, Shanghai 200072, P. R. China; 2Department of Mechanics, College of Sciences, Shanghai University, Shanghai 200444, P.R. China. *Email: [email protected] 9:50-10:00 Cross discussion

19/45 Session d2: Metals: Fatigue, Damage, Failure and Environmental Effects (2) May 23 (Mon) 10:20-12:20 Room 2 Co-Chairs: Jaroslav Polák, Materials Academy of Sciences,Czech Republic G. Chai, Sandvik Materials Technology, R&D Centre, Sweden Q0592 Invited lecture 10:20-10:45 Exploring the Physics of Dynamic Fragmentation through High- Performance Computing S. Levy1, J.F. Molinari1,*, and R. Radovitzky2 1LSMS, IIS, ENAC, EPFL, Lausanne, Switzerland; 2Department of Aeronautics and Astronautics, MIT, Cambridge, MA, U.S.A. *Email: jean-francois.molinari@epfl.ch O0324 Invited lecture 10:45-11:10 Uniaxial and Multiaxial Ratchetting of SiCp/6061Al Composites: Constitutive Modeling and Finite Element Simulation S.J. Guo1, G.Z. Kang1,* and J. Zhang1 1School of Mechanics and Engineering, Southwest Jiaotong University, Chengdu 610031, China. *Email: [email protected] S0335 11:10-11:25 Generalized Stress Intensity Factors in the Interaction between Two Polygonal Holes in Anisotropic Materials B. Xu1, X.C. Ping1,*, D.D. He1, Z. Xie1 and W.H. Liu1 1School of Mechatronics Engineering, East China Jiaotong University, Nanchang, Jiangxi 330013, China. *Email: [email protected] S0562 11:25-11:40 Numerical Simulation on Failure Process of Ring-shape Specimen of Rock Y.B. Zhang1,*, C.A. Tang1, Z.Z.Liang1 and S.B. Tang1 1Center for Rock Instability and Seismicity Research, Faculty of Infrasture Engineering, Dalian University of Technology, Dalian 116024, China. *Email: [email protected] I0760 11:40-11:55 Inclusion Problem with Dislocation-Like Imperfect Interface Y.T. Zhao1,*, B.S. Zhao2, M.Z. Wang3 and S.P. Ma1 1Department of Mechanics, School of Aerospace Engineering, Beijing Institute of Technology, Beijing 100081, China; 2School of Mechanical Engineering, University of Science and Technology Liaoning, Anshan 114051, China; 3State Key Laboratory for Turbulence and Complex Systems and Department of Mechanics and Aerospace Engineering, College of Engineering, Peking University, Beijing 100871, China. *Email: [email protected] S0285 11:55-12:10 Effect of Active Mineral Filler on Asphalt Mixtures with Acidic Aggregates S.P. Wu*1 , J. Xie1, and X.L. Li1 1Key Laboratory of Silicate Materials Science and Engineering, Wuhan University of Technology, Ministry of Education, Wuhan, Hubei 430070, China. *Email:[email protected] 12:10-12:20 Cross Discussion

Session d3: Metals: Fatigue, Damage, Failure and Environmental Effects (3) May 23 (Mon) 13:40-15:40 Room 2 Co-Chairs: J.F. Molinari, EPEL, Switzerland G.Z. Kang, Southwest Jiaotong University R0507 Invited lecture 13:40-14:05 Multiaxial fatigue life criteria and microstructure modeling of metals N. Saintier1,*, C. Robert2, F. Morel2 and T. Palin-Luc1 1Arts et Métiers ParisTech, I2M, UMR CNRS 5295 Université de Bordeaux, Esplanade des Arts et Métiers, 33405 TALENCE Cedex, FRANCE; 2Arts et Métiers ParisTech, LAMPA, 2 Boulevard du Ronceray BP9352549035 Angers, FRANCE. *Email: [email protected] W0737 14:05-14:22 Fracture Analysis of Nonhomogeneous Materials Using an Interaction Integral Method H.J. Yu1,*, L.Z. Wu1, L.C. Guo1 and F.N Guo1 1Center for composite materials, Harbin Institute of Technology, Harbin 150001, China. *Email:

20/45 [email protected] R0604 14:22-14:39 Effects of Design Parameter Changes on the Fatigue Life of Light-Blocked Component W.L. Xiao1,* and H.B. Chen1 1CAS Key Laboratory Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei, Anhui 230027, China. *Email: [email protected] W0637 14:39-14:56 Numerical Simulation of Progressive Failure in Transversely Isotropic Geomaterials X.H. Chu1,*, J.F. Chang1, Q.H. Jiang1 and Y.J. Xu1 1Department of Engineering mechanics, Wuhan University, Wuhan 430072, China. *Email: [email protected]

R0583 14:56-15:13 Fatigue Analysis of Tension Shear Spot Welds Based on Material Property Gradient R.J. Wang1,* and D.G. Shang2 1Faculty of Mechanical and Electrical Engineering, Kunming University of Science and Technology, Kunming 650093, China; 2College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing 100124, China. *Email: [email protected] M0398 15:13-15:50 A Family of Hamiltion-type Variational Principles for Linear Thermo-Magneto-Electro- Elastic Solids J.G. Wang*1 , M.X. Zhang1, F. Qian1, and Q. Wang1 1College of Civil Engineering, Hefei University of Technology, Hefei 230009, China. *Email: [email protected] 15:30-15:40 Cross discussion

Session d4: Metals: Fatigue, Damage, Failure and Environmental Effects (4) May 23 (Mon) 16:00-18:10 Room 2 Co-Chairs: T. J. Wang, Xi’ an Jiaotong University Vikas Tom Purdue University, USA H0389 Keynote lecture 16:00-16:30 A Robust Cyclic Elastoplastic Constitutive Framework for Fatigue Life Analysis J.L. Chaboche1*, P. Kanouté1 and F. Azzouz2 1Department of Metallic Materials and Structures, ONERA, Châtillon, France; 2Centre des Matériaux, Mines- ParisTech, Evry, France. *Email : [email protected] M0383 invited lecture 16:30-16:55 A Constitutive Model for Coupled Transformation and Plastic Behavior of Shape Memory Alloys X. Peng1,*, B. Chen2, and X. Long2 1Department of Engineering Mechanics, Chongqing University, Chongqing 400044, China; 2Chongqing University, Chongqing 400044, China. *Email: [email protected]

M0307 Invited speech 16:55-17:20 Crystal Symmetry Dependent Deformation in Pb(ZrxTi1-x)O3 Ceramics F.X. Li1,2, Y.W. Li1, X.L. Zhou1 1State Key Laboratory for turbulence and complex systems, College of Engineering, Peking University, Beijing, 100871, China; 2Center for Applied Physics and Technologies, Peking University, Beijing, China. E- mail address: [email protected] Q0721 17:20-17:40 Analysis of the Effective and Internal Cyclic Stress Components in cast γ–TiAl Based Alloy Martin Petrenec1, Jaroslav Polák1 , Tomáš Kruml1 and Petr Buček1 1Institute of Physics of Materials, Academy of Sciences of the Czech Republic, Zizkova 22, 616 62 Brno, Czech Republic. *Email: [email protected] A0386 17:40-18:00 Effects of Heterogeneous Distribution of Fuel Particles on the Irradiation-Induced Mechanical Behaviors in the Dispersion Nuclear Fuel Plate S.R. Ding*1, Y.J. Jiang1, Q.M. Wang1, and Y.Z. Huo*1 1Department of Mechanics and Engineering Science, Fudan University, Shanghai 200433, China. *Email:

21/45 [email protected]; [email protected] 18:00-18:10 Cross discussion

Session e1: Composites: Nanomechanics and Nanostructure May 25 (Wed) 8:00-10:00 Room 2 Co-Chairs: S.V. Panin, Institute of Strength Physics and Materials Science, Russia Peifeng Li, Nanyang Technology University, Singapore B0345 Keynote lecture 8:00-8:30 Response of Bulk Cu-Nb Nanolamellar Composites to Severe Rolling Strains N.A. Mara*1, J. Ledonne2, T. Wynn1, J. Carpenter1, J. Wang1, I.J. Beyerlein1 1Los Alamos National Laboratory, MS-K771, Los Alamos, New Mexico, 87545, USA; 2Materials Science and Engineering Department, Carnegie Mellon University, Pittsburgh, Pennsylvania, USA. *Email: [email protected] E0400 Keynote lecture 8:30-9:00 Micro/Macro-Analysis of Lamellart Composites Based on Discrete Dislocation Plasticity and Periodic Homogenization D. Okumura1, K. Yamaguchi2, and N. Ohno*1 1Department of Mechanical Science and Engineering, Nagoya University, Chikusa-ku, Nagoya 464-8603, Japan; 2Department of Computational Science and Engineering, Nagoya University, Chikusa-ku, Nagoya 464- 8603, Japan. *Email: [email protected] O0438 9:00-9:20 Ultrasonic Dispersion and Cryogenic Tensile Properties of Poly-dicyclopentadiene Composites with Carbon Nanofibers or Nanocoils K. Sanada*1, H. Sanga1 and Y. Shindo2 1Toyama Prefectural University, Kurokawa 5180, Imizu, Toyama 939-0398, Japan; 2Tohoku University, Aoba- yama 6-6-02, Sendai 980-8579, Japan. *Email: [email protected] B0286 9:20-9:37 Strain Rate and Temperature Effects on Compressive Buckling of Carbon Nanotubes and Intramolecular Junctions M. Li1, Z. Kang*1 1State Key Laboratory of Structural Analysis for Industrial Equipment, Dalian University of Technology, Dalian 116024, China. *Email address: [email protected] B0414 9:37-9:54 Interface Structure and Mechanical Properties of the Nanolayered Al/Pd Thin Films Y. Kong*1,2, L. Shen1, G. Proust1,3, and G. Ranzi1 1School of Civil Engineering, University of Sydney, NSW 2006, Australia; 2State Key Lab of Powder Metallurgy, Central South University, Changsha 410083, China; 3Australian Centre for Microscopy & Microanalysis, University of Sydney, NSW 2006; *Email: [email protected] 9:54-10:04: Cross Discussion

Session e2: Composites: Micromechanics (1) May 25 (Wed) 13:30-16:00 Room 2 Co-Chairs: N. Ohno, Nagoya University, Japan Jinxiong Zhou, Xi’an Jiaotong University D0640 Keynote lecture 13:30-14:00 Continuum Modeling of Dislocation Plasticity: Theory, Numerical Implementation and Comparison to Discrete Dislocation Simulations P. Gumbsch*1,2, S. Sandfeld1, J. Senger1, D. Weygand1, T. Hochrainer1 1Institute for Applied Materials IAM, Karlsruhe Institute of Technology (KIT), Germany; 2Fraunhofer Institute for Mechanics of Materials IWM, Freiburg, Germany. *Email: [email protected] E0756 Keynote lecture 14:00-14:30 Material Heterogeneity and Emergent Length Scale due to Non- equilibrium Phase Transition Q.P. Sun1

22/45 1Department of Mechanical Engineering, The Hong Kong University of Science and Technology, Hong Kong, China. *Email: [email protected] O0360 Invited lecture 14:30-14:55 Particulate-reinforced Titanium Composites for Orthopaedic Implants Y.C. Li1,*, P.D. Hodgson2 and C.E. Wen3 1Institute for Technology Research and Innovation, Deakin University, Geelong, Victoria 3217, Australia and Solar Energy Research Institute, Yunnan Normal University, Kunming, Yunnan 650092, China; 2Institute for Technology Research and Innovation, Deakin University, Geelong, Victoria 3217, Australia; 3Industrial Research Institute Swinburne, Swinburne University of Technology, Hawthorn, Victoria 3122, Australia. *Email: [email protected] A0596 14:55-15:12 Imaging Interfacial Stress and Strain in Heterogeneous Films Y. Xu*1, L.A. Wilen3, and E.R. Dufresne2 1Department of Mechanical Engineering and Materials Science, Yale University, New Haven, CT 06511, USA; 2Department of Mechanical Engineering and Material Science, Chemical Engineering, Physics, and Cell Biology, Yale University, New Haven, CT 06511, USA; 3Unilever Research and Development, Trumbull, CT 06611, USA. *Email: [email protected] O0464 15:12-15:29 Homogenization Analysis of Plane Structures with Three Dimensional Periodic Microstructures D.D. Wang*1, L.M. Fang1 1Department of Civil Engineering, Xiamen University, Xiamen, Fujian, 361005, China. *Email: [email protected] J0276 15:29-15:48 Application of Granite in Asphalt-Treated Base S.P. Wu1 , X.L. Li*1, and J. Xie1 1Key Laboratory of Silicate Materials Science and Engineering, Wuhan University of Technology, Ministry of Education, Wuhan, Hubei 430070, China. *Email:[email protected] 15:48-16:00 Cross discussion

Session e3: Composites: Micromechanics (2) May 26 (Thu) 8:00-10:00 Room 2 Co-Chairs: P. Gumbsch, Karlsruhe Institute of Technology, Germany Xinlin Gao, Texas A&M University, USA E0620 Keynote lecture 8:00-8:30 Computer-aided Design of Filled Polymeric Composites for Tribotechnical Applications B. A. Lyukshin1, P.A. Lyukshin2, S.V. Panin2,*, S.A. Bochkareva2, N. Yu. Matolygina2, N. Yu. Grishaeva2 and Yu.S. Strukov1 1Department of mechanics, graphics and quality control, Tomsk University of Control Systems and Radioelectronics, Tomsk, 634050, Russia; 2Institute of Strength Physics and Materials Science SB RAS, Tomsk, 634021, Russia. *Email: [email protected] A0757 Keynote Lecture 8:30-9:00 Atom-by-atom Analysis of Functional Ceramics Interfaces 8:30-9:00 Atom-by-atom Analysis of Functional Ceramics Interfaces Z.C. Wang1,*, M. Saito1, S. Tsukimoto1 and Y. Ikuhara1 1WPI Research Center, Advanced Institute for Materials Research, Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai, Japan. Email: [email protected] W0736 9:00-9:17 Analysis on a Thermal Fracture Problem in Packaging Structures F.N. Guo1,*, L.C. Guo1 and H.J. Yu1 1Department of Astronautic Science and Mechanics, Harbin Institute of Technology, Harbin 150001, China. *Email: [email protected] X0405 9:17-9:34 Finite Element Analysis of Mechanical Properties Of 3D and 5-D Tubular Braided Composites

23/45 S.S. Chen*1, M.Y. Lv1, Z.G. Liu1, L.Fu1 1School of Aeronautic Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China. *Email: [email protected] X0409 9:34-9:51 Numerical Prediction for the Elastic Properties of 3D Full 5-directional Braided Composites Considering Adhesive Layers Y.N. Huang*1, Z.G. Liu1, L.D. Ying1 and F. Zhang1 1School of Aeronautic Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China. *Email: [email protected] 9:51-10:01 Cross discussion

Session e4: Composites: Micromechanics (3) May 26 (Thu) 10:20-12:20 Room 2 Co-Chairs: T. Siegmund, Purdue University, USA M.F. Zhu, Southeast University B0550 Keynote lecture 10:20-10:50 Two-scale Analysis for the Composite Plate with 3-D Small Periodic Configuration under Condition of Coupled Thermoelasticity Z.Q. Wang1, J.Z. Cui*1 1LSEC, Institute of Computational Mathematics and Scientific/Engineering Computing, Academy of Mathematics and System Sciences, CAS, Beijing, 100190, China. *Email: [email protected]; Email: [email protected] B0570 10:50-11:10 Effect of Interface Energy on Stress Field Around a Spheroidal Nano-inclusion Embedded in A Semi-infinite Elastic Medium H. W. Zhang1, Z. Y. Ou*1, and T. J. Wang2 1School of Science, Lanzhou University of Technology, Gansu, Lanzhou 730050, China; 2Engneering Mechanics, Xi’an Jiaotong University, Shangxi, Xi’an, 710049, China. *Email: [email protected] W0526 11:10-11:30 Band Gap Computation for Mixed Solid-Fluid Phononic Crystals of Triangular Lattice by Dirichlet-to-Neumann Maps F. L. Li*1, Y. S. Wang1, C. Zhang2 1Institute of Engineering Mechanics, Beijing Jiaotong University, 100044, China; 2Department of Civil Engineering, University of Siegen, D-57076 Siegen, Germany. *Email: [email protected] I0353 11:30-11:50 Determination of Fracture Properties in Thermal Barrier Coating Systems by Non- standard Bending Tests P.F. Zhao*1, F.L. Shang1 1MOE Key Laboratory for Strength and Vibration, Department of Engineering Mechanics, Xi'an Jiaotong University, Xi’an, 710049, China. *Email: [email protected] J0273 11:50-12:00 Study on the Heterogeneous Structure of Composites Bulletproof and the Protecting Mechanism C. WANG*1, Z.T. AN1, and J.W. ZHEN1 1Ammunition Engineering Department, Ordnance Engineering College, Shijiazhuang, Hebei 050003, China. *E-mail:[email protected] 12:00-12:20 Cross discussion

Session f1: Composites: Scale Effects and Multi-Scale Modeling (1)

24/45 May 24 (Tue) 8:00-10:00 Room 3 Co-Chairs: J. X. Wang, Peking University N. Saintier, Arts et Métiers ParisTech, France B0358 Keynote lecture 8:00-8:30 A Multiscale Study of Energetic Composite Responses Z. Chen*1, S. Jiang2, Y. Gan3, T. Sewell4, and D. Thompson4 1Department of Civil and Environmental Engineering, University of Missouri, Columbia, MO 65211, USA; 2Faculty of Vehicle Engineering and Mechanics, Dalian University of Technology, Dalian 116024, China; 3Department of Engineering Mechanics, Zhejiang University, Hangzhou, Zhejiang 310027, China; 4Department of Chemistry, University of Missouri, Columbia, MO 65211, USA. *Email: [email protected] A0456 8:30-8:50 Length-Scale Effect in Stability Problems for Micro-Periodically Stiffened Cylindrical Shells B. Tomczyk*1 1Department of Structural Mechanics, Technical University of Lodz, al.Politechniki 6, 90-924 Lodz, Poland. *Email: [email protected] V0639 8:50-9:10 Composite Propellant Dewetting Simulation based on CZM Model and Contact Angle Measurements J.L. Zhao1,* 1Xi’an Research Inst. Of Hi-Tech, Xi’an 710025, China. *Email: [email protected] X0462 9:10-9:30 Elastic Analysis for Contact Problems with Surface Stress Effects L. Y. Wang1 and Z. Y. Ou*1 1School of Science, Lanzhou University of Technology, Gansu, Lanzhou 730500, China. *Email: [email protected] E0475 9:30-9:50 Effective Modulus of Nano-particle Composites with Different Particle Size Distributions P.J. Li*1, Q.Z. Wang1 1Division 508, School of Aeronautical Science and Engineering, Beijing University of Aeronautics and Astronautics, Beijing 100191, China. *Email: [email protected] 9:50-10:00 Cross discussion

Session f2: Composites: Scale Effects and Multi-Scale Modeling (2) May 24 (Tue) 10:20-12:20 Room 3 Co-Chairs: Z. Chen, University of Missouri, USA Xiqiao Feng, Tsinghua University E0764 Keynote lecture 10:20-10:50 Size Effects at Nano-Scale: Governing Mechanism and Efficient Simulations Y.L. Bai*1, R Yang1, P Xiao1, and Y.Z. Tang1 1State Key Laboratory of Nonlinear Mechanics, Chinese Academy of Sciences, Beijing, Beijing 100190, China. *Email: [email protected] F0751 Invited lecture 10:50-11:15 Irradiation-induced Thermo-mechanical Coupling in Dispersion Nuclear Fuel Elements S.R. Ding1, Y.F. Wan1, Y. Cui1, and Y.Z. Huo*1 1Department of Mechanics and Engineering Science, Fudan University, Shanghai 200433, China. *Email: [email protected] G0763 11:15-11:35 Atomistic Predictions of Dislocation Nucleation at Experimental Loads and Temperatures with Transition State Theory L.D. Nguyen, K.L. Baker, and D.H. Warner* School of Civil and Environmental Engineering, Cornell University, Ithaca NY. *Email: [email protected] E0624 11:35-11:55 Reformulation of Continuum Mechanics Balance Equations for Multiscale Simulation

25/45 Youping Chen*, Liming Xiong and Qian Deng Department of Mechanical and Aerospace Engineering, University of Florida, USA. *Email: [email protected] E0670 11:55-12:15 Multi-scale Modelling of Void Growth and Coalescence within Heterogeneous Void Clusters C.J. Butcher*1, and Z.T. Chen1 1Dept. of Mech. Eng. University of New Brunswick, New Brunswick, Canada, E3B 5A3. *Email: [email protected] 12:15-12:25 Cross discussion

Session f3: Composites: Scale Effects and Multi-Scale Modeling (3) May 25 (Wed) 8:00-10:00 Room 3 Co-Chairs: M. Zhou, Georgia Institute of Technology, USA Sha Yin, Harbin Institute of Technology I0283 Keynote lecture 8:00-8:30 Surface Stress and Surface Energy of Solids and Size-dependent Young’s Modulus T.Y. Zhang*1 1Department of Mechanical Engineering, Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong, China. *Email: [email protected] B0753 Keynote lecture 8:30-9:00 Size-dependent Plasticity of Nanoporous Materials: the Effect of Surface Energy W. X. Zhang1, T. J. Wang1*, and X. Chen2 1MOE Key Laboratory for Strength and Vibration, Department of Engineering Mechanics, Xi’an Jiaotong University, Xi’an 710049, China; 2Department of Earth and Environmental Engineering, Columbia University, NY 10027, USA; *Email: [email protected] E0535 Invited lecture 9:00-9:25 A Consistent Thermodynamic Theory of Inelasticity Resulting in Gradients in Dislocation Density with Naturally Evolving Length Scales Douglas J. Bammann Mechanical Engineering Department, Mississippi State University Starkville, MS 39759. Email: [email protected] A0517 9:25-9:45 Interdiffusion across coherent multilayer interfaces: Effects of coherency stress and grain sizes on the interface sharpening Haibo Wan1, Yao Shen1*,Youxing Chen2, Jian Sun1 1School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240, China; 2Department of Mechanical Engineering, and Materials Science and Engineering Program, Texas A&M University, College Station, TX 77843-3123, Email: [email protected] O0446 9:45-9:55 Investigation on Tensile Properties and Size Effect of 3D Braided Composites B.L. Wang*1, Z.Q. Wang1, and G.D. Fang2 1Smart Structures and Advanced Composites Laboratory, Harbin Engineering University, Harbin 150001, China; 2Center for Composite Materials, Harbin Institute of Technology, Harbin, 150001, China. *Email: [email protected] 9:55-10:05 Cross discussion

Session f4: Composites: Multi-Physics Modeling May 25 (Wed) 10:20-11:45 Room 3 Co-Chairs: Douglas J. Bammann, Mississippi State University, USA Y.Z. Huo, Fudan University K0601 Invited lecture 10:20-10:45 A Mechanochemical Model of the Microtubule Growing Dynamic

26/45 X.Q. Feng*1, X.Y. Ji1 1Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China. *Email: [email protected] O0470 10:45-11:02 Study on Microwave Curing of Epoxy Matrix Composites X.L. Chang1, T. Sun*1, and J.W. Lai1 1Xi’an Hi-Tech Institute, Xi’an, Shangxi 710025, China. *Email: suntao1983ts @sohu.com O0300 11:02-11:19 Experiment Modeling of the Finite Thermo-hyperelsticity for Fiber-reinforced Rubber Composites X. Huang1, J.S. Ren*1, and X.G. Yuan2 1Shanghai Institute of Applied Mathematics and Mechanics, Shanghai 200075, China; Department of Mechanics, Shanghai University, Shanghai 200444, China; 2College of Science, Dalian Nationalities University, Liaoning Dalian 116600, China. *E-mail: [email protected] S0591 11:19-11:35 Damage Monitoring in Composite Structures by Embedded Fiber Bragg Grating Sensors M. Etezad1, M. Kahrizi1,* and K. Khorasani1 1Department of Electrical and Computer Engineering, Concordia University, Montréal, Quebec H3G1M8 Canada. *Email: [email protected] X0461 11:35-11:45 Elasticity Solutions for Functionally Graded Circular Plates B. Yang*1,2, H.J. Ding3, and W.Q. Chen4 1Department of Civil Engineering, Zhejiang University, Zijingang Campus, Hangzhou 310058, China; 2Department of Civil Engineering, Zhejiang A & F University, Lin’an 311300, China; 3Department of Civil Engineering, Zhejiang University, Zijingang Campus, Hangzhou 310058, China; 4Department of Engineering Mechanics, Zhejiang University, Yuquan Campus, Hangzhou, 310027, China. *Email: [email protected]

Session f5: Composites: Structure Behavior May 25 (Wed) 13:30-16:00 Room 3 Co-Chairs: Youping Chen, University of Florida, USA Cliff Butcher. Univ. of New Brunswick, USA B0441 Invited lecture 13:30-13:55 Interfacial Property in Nano-materials due to Van Der Waals and Electrostatic Coulombic Interactions N. Hu*1, X.H. Peng2, Y. Li2, S. Liu2 and Y. Liu2 1Department of Mechanical Engineering, Chiba University, Japan, 263-8522 Japan; 2Department of Mechanics Engineering, Chongqing University, Chongqing, 400044. *Email: [email protected] E0559 13:55-14:15 Wave Propagation in Heterogeneous Materials with Secondary Substructure M. Berezovski*1, A. Berezovski1, J. Engelbrecht1 1Centre for Nonlinear Studies, Institute of Cybernetics at Tallinn University of Technology, Akadeemia tee 21, 12618 Tallinn, Estonia. *E-mail: [email protected] O0681 14:15-14:35 Numerical Analysis of the Residual Stresses in Z-Pinned Composite Laminates during the Curing Process S. Li1,*, J.Q. Zhang2, Z.S. Guo1 and H.J. Hu1 1Shanghai Institute of Applied Mathematics and Mechanics, Shanghai University, Shanghai 20072, China; 2Department of Mechanics and Shanghai Key Laboratory of Mechanics in Energy and Environment Engineering, Shanghai University, Shanghai 200444, China. *E-mail: [email protected] X0342 14:35-14:55 The Refined analysis of Bi-layer Beams without ad hoc Assumption Bao-sheng Zhao1,*, Y.T. Zhao2 and X.E. Wu1 1School of Mechanical Engineering, University of Science and Technology Liaoning, Anshan 114051, China; 2Department of Applied Mechanics, School of Aerospace Engineering, Beijing Institute of Technology, Beijing 100081, China. *Email: [email protected]

27/45 O0747 14:55-15:15 Prediction of Tensile Modulus of 3D Braided Composites with Interior Cracks Y. Guo1,*, L.Z. Wu1, Y.H. Yang1 and Z.G. Zhou1 1Center for Composite Material, Harbin Institute of Technology, Harbin, Heilongjiang, 150080, China. *Email: [email protected]

W0674 15:15-15:35 Nonlinear Numerical Analysis of Large Deflection of FGM Circular Plate Y. Dai1,*, X. Chong1, P. Zhang1 and Z.Q. Zheng1 1Department of Mechanical Engineering, Academy of Armored Forces Engineering, Beijing 100072, China. *Email: [email protected] 15:35-16:00 Cross discussions

Session f6: Composites: Inelasticity, Damage and Failure May 26 (Thu) 8:00-10:00 Room 3 Co-Chairs: N.A. Mara, Los Alamos National Laboratory, USA K. Agbessi, Arts et Metiers Paris Tech, France X0410 8:00-8:18 A Fracture Mechanics Model for an Arbitrarily Oriented Crack in Functionally Graded Materials Z.H. Wang1,* and L.C. Guo1 1Department of Astronautic Science and Mechanics, Harbin Institute of Technology, Harbin 150001, P.R. China. *Email: [email protected]; [email protected] P0444 8:18-8:36 Numerical Computation and Analysis on Damage Effects of Multilayer Medium under Explosive Loading Y. Peng1,*, J.L. Tao1, Y. Fu1, X.L. Liu1 and Y. Yao1 1School of Civil Engineering and Architecture, Southwest University of Science and Technology, Mianyang Sichuan 621010, P. R. China. *Email: [email protected] A0660 8:36-8:54 Microstructure and damage analysis of solid propellant C.B. Ma*1, H.F. Qiang1, W.M. Wu1 and J. Xue2 1Xi’an Hi-Tech Institure, Xi’an 710025, China; 2State key laboratory of oral disease, Sichuan University, Chengdou 610041, China. *Email: [email protected] O0539 8:54-9:12 Evaluation of Mechanical Properties of Ductile Films on Brittle Substrates Based on the Representative Strain H.P. Hu1, Y.G. Liao2, C.Q. Guo2, L.M. Jiang4, Y.C. Zhou*3, and X.J. Zheng3 1Key Laboratory of Low Dimensional Materials and Application Technology of Ministry of Education, Xiangtan University, China and School of Mathematics and Physics, University of South China, China; 2School of Mathematics and Physics, University of South China, Hengyang, Hunan 421001, China; 3Key Laboratory of Low Dimensional Materials and Application Technology of Ministry of Education, Xiangtan University, Xiangtan, Hunan 411105, China; 4College of Packing & Printing, Hunan University of Technology, Zhuzhou, Hunan 412007, China. *Email address: [email protected] G0465 9:12-9:30 Research on Creep Characteristic of Nano-Montmorillonite Modified Asphalt Binder T.G. Liu1, K. Chang1 and S.P. Wu1,* 1Key Laboratory of Silicate Materials Science and Engineering of Ministry of Education, Wuhan University of Technology, Wuhan, Hubei 430070, China. *Email: [email protected] H0323 9:30-9:48 Effect of UV Aging on the Rheological Properties of Asphalt Mortar L. Pang*1, L. Wan2, S. P. Wu2 and L. Lu2 1School of Science, Wuhan University of Technology, Wuhan, Hubei 430070, China; 2Key Laboratory of Silicate Materials Science and Engineering, Wuhan University of Technology, Wuhan, Hubei 430070, China. *Email: [email protected] 9:48-10:00 Cross discussion

28/45 Session g1: Composites: Microstructure-Property Relations and Material Design (1) May 23 (Mon) 16:00-18:10 Room 5 Co-Chairs: T. Kitamura, Kyoto University, Japan Z. H. Xia, University of North Texas, USA O0673 Invited lecture 16:00-16:25 Mechanical Properties of Modified Epoxy Resins and Their Glass Fiber Reinforced Composites Y. Liu, J.P. Yang, H.M. Xiao, Q.P. Feng and S.Y. Fu1,* 1Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China. *E-mail: [email protected] M0752 Invited lecture 16:25-16:50 Surface Piezoelectricity for a Plane Boundary W.Q. Chen*1 1Department of Engineering Mechanics, Zhejiang University, Hangzhou 310027, China. *Email: [email protected]

H0372 16:50-17:07 Viscoelastic Relaxation of Bulk Metal Glass Zr46.75Ti8.25Cu7.5Ni10Be27.5 at High Temperature Z. C. Zhou1,* and J. P. Shui2 1Suzhou Vocational University, Suzhou, 215104, Jiangsu, China; 2Key Laboratory of Material Physics, Institute of Solid State Physics, Chinese Academy of Sciences, Hefei, 230031, China. *Email: [email protected] O0481 17:07-17:24 Ultimate Bearing Capacity of RC Beams Reinforecd by Prestressed AFRP Sheet under 4-point Bending Q.D. Zeng1,*, W. Jing1 and Y.L. Zhou1 1School of Civil Engineering and Transportation, South China University of Technology, GuangZhou 510640, China. *Email: [email protected] O0560 17:24-17:41 Characterization of In-Plane Fiber Architecture in Z-Pinned Unidirectional Carbon- Fiber Preforms J. Zhang1,*, J. Q. Zhang2 and L. Zhao3 1Shanghai Institute of Applied Mathematics and Mechanics, Shanghai University, Shanghai 200072, China; 2Department of Mechanics and Shanghai Key Laboratory of Mechanics in Energy and Environment Engineering, Shanghai University, Shanghai 200444, China; 3AVIC Beijing Aeronautical Manufacturing Technology Research Institute, Beijing 100024, China. *Email: [email protected] O0691 17:41-17:58 Evaluation of the Effective Properties of High Silica/Phenolic Composite under Volumetric Ablation Condition S.B. Shi , J. Liang, G.D. Fang, and L.L. Wang Harbin Institute of Technology, Harbin, China. Email: [email protected] 17:58-18:10 Cross discussion

Session g2: Composites: Microstructure-Property Relations and Material Design (2) May 24 (Tue) 8:00-10:00 Room 5 Co-Chairs: R.S. Qin, Imperial College London, UK Zhaohui Jin, Shanghai Jiao Tong University D0650 Invited lecture 8:00-8:25 Numerical Modeling of Microstructure Evolution in Alloy Solidification M. F. Zhu1,*, S. Y. Pan1, D. K. Sun1, Z. L. Gui1 and F. M. Zhou1 1Jiangsu Key Laboratory for Advanced Metallic Materials, School of Materials Science and Engineering, Southeast University, Nanjing, 211189, China. *Email: [email protected]

A0541 8:25-8:42 Numerical Simulation on the Mechanical Behavior of Water-contained PEM I. Riku*1, K. Morizane1 and K. Mimura1 1Department of Mechanical Engineering, Osaka Prefecture University, Sakai City 5998231, Japan. *Email:

29/45 [email protected]

D0690 8:42-8:59 Preparation and Characterization of WO3 Nanocrystalline by Selected-dissolving of WO3/SiO2 Composites

Z.H.Chen1,* and J.H.Xu2 1Institute of Environmental Science and Engineering, Chang’an University, Xi’an 710054, China; 2School of Science, Xi’an Institute of Post and Telecommunication, Xi’an 710061, China. 1Email: [email protected]; 2Email: [email protected] O0635 8:59-9:16 Effect of Adherent Thickness on Strength of Single-lap Adhesive Composites Joints Y.H. Yang1,*, L.Z. Wu1, Y. Guo1 and Z.G. Zhou1 1Center for Composite Material, Harbin Institute of Technology, Harbin, Heilongjiang 150080, China. *Email: [email protected] I0333 9:16-9:33 Thermoelastic contact of the homogeneous materials coating half-plane J. Liu*1, L.L. Ke1, Y.S. Wang1 1Institute of Engineering Mechanics, Beijing Jiaotong University, Beijing 100044, China. *Email: [email protected] X0744 9:33-9:50 Analytical Solution of Non-Uniform Settlement for Embankments on Soil Foundations Yaochen Li1,* 1School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, China. *Email: [email protected] 9:50-10:00 Cross discussions

Session h1: Concrete and Asphalt: Micromechanics and Multi-Scale Modeling May 23 (Mon) 16:00-18:10 Room 4 Co-Chairs: E. Schlangen, Delft University of Technology, Netherlands Isamu Riku, Osaka Prefecture University, Japan V0388 16:00-16:20 SHPB Experiment And Numerical Simulation of Concrete under Room Temperature and High Temperature H.C. Yao*1, R. H. Wang*1, and B. Jia*1 1School of Civil Engineering and Architecture, Southwest University of Science and Technology, Mian Yang, Si Chuan, 621010, China. *Email: [email protected] P0417 16:20-16:40 The Numerical Simulation Investigation on Penetration Capability of New Nose Shape Projectile Penetrating into Concrete Target S.Q. Yang1, C.J. Sun, H.Y. Gao Yang Shiquan, Institute of Systems Engineering, CAEP, Miangyang 621900, China. Email: [email protected] E0435 16:40-17:00 Multiscale Modeling of Fracture Processes for Hardened Cement Paste Z.W. Qian*1, E. Schlangen1, G. Ye1 and K.V. Breugel1 1Microlab, Faculty of Civil Engineering and Geosciences, Delft University of Technology, the Netherlands. *Email: [email protected] H0423 17:00-17:20 Effect of Zeolite 4A on the Aging and Rheological Properties of SBS Asphalt Binders S.P. Wu1, W. Zhang1,*, Z. H. Zhu1 and J. Q. Zhu1 1Key Laboratory of Silicate Materials Science and Engineering of Ministry of Education, Wuhan University of Technology, Wuhan, Hubei 430070, China. *Email: [email protected] B0702 17:20-17:40 Determination of Cement Paste Strength by Nano-indentation on Thin Section E. Schlangen*1, G.J. Einarsson1, and Z. Qian1 1Delft University of Technology, Faculty of Civil Engineering and Geosciences, Microlab, Delft, Netherlands. *Email: [email protected] O0472 17:40-18:00 Effect of Phase Change Material on Temperature Susceptibility of Asphalt M. Z. Chen1, L. Wan1, S. P. Wu*1, J. Hong1 and G. J. Xu1

30/45 1Key Laboratory of Silicate Materials Science and Engineering, Wuhan University of Technology, Wuhan, Hubei 430070, China. *Email: [email protected] 18:00-18:10 Cross Discussion

Session h2: Concrete and Asphalt: Inelasticity, Damage and Failure May 25 (Wed) 13:30-16:00 Room 5 Co-Chairs: M. Borhuslav, University of West Bohemia In Pilsen, Czech Republic Jie Li, Tongji University P0310 13:30-13:46 Numerical Simulation of the Impact Response on Concrete Target under Penetration Y. Fu1,*, Y. Peng1, J.L. Tao1, Y. Yao1 and X.L. Liu1 1Southwest University of Science and Technology, Mianyang, Sichuan 621010, China. *Email: [email protected] P0379 13:46-14:02 Research on a Dynamic Constitutive Model of Concrete in High Temperature J.L. Tao1,* and K. Li1 1College of Civil Engineering and Architecture, Southwest University of Science and Technology, MianYang, Sichuan, 621010, China. *Email: [email protected] P0314 14:02-14:18 Research on the Influence of Pores and Micro-cracks on the Macro-mechanical Properties of Concrete L. Jin1,* and X.L. Du1 1The Key Laboratory of Urban Security and Disaster Engineering, Ministry of Education, Beijing University of Technology, Beijing 100124, China. *Email: [email protected] R0740 14:18-14:34 Calculate of the Fatigue Life for Concrete Pavement L. Zhang1,*, J.X. Yuan1, W.J. Liu1 and C.J. Yao1 1Department of Astronautic Science and Mechanics, Harbin Institute of Technology, Harbin 150001, P.R. China. *Email: [email protected] Q0741 14:34-14:50 Dynamic Viscous-damage Constitutive Model for Concrete Qiaoping Huang1 and Jie Li1,2* 1School of Civil Engineering, Tongji University, Shanghai 200092, China; 2The State Key Laboratory on Disaster Reduction in Civil Engineering, Tongji University, Shanghai 200092, China. *Email: [email protected] P0339 14:50-15:06 The Concrete Model of the Penetration Problems on Mesolevel W.F. Xu1,2*, X.C. Huang2, Z.M. Hao2, Y. Wang1 and Y.M. Xia1 1Department of Modern Mechanics, University of Science and Technology of China, Hefei, Anhui 230027, China; 2Institute of Structural Mechanics, CAEP, Mian Yang, Sichuan 621900, China. Email: [email protected] P0311 15:06-15:22 Investigation on Static Shear Creep Behavior of Asphalt Mastic Containing Recycled Cement Mortar Powder J.Q. Zhu*, S.P. Wu, J.J. Zhong and D.M. Wang 1Key Laboratory for Silicate Materials Science and Engineering of Ministry of Education, Wuhan University of Technology, Luoshi Road 122, Wuhan, Hubei 430070, China. *Email: [email protected] F0312 15:22-11:38 Analysis of Thermo-mechanical Interaction in Membranes X.M. Zhang*1, L. Zhang*, and P.Y. Zhang* 1Department of Engineering Mechanics, Chongqin University, Chongqin 400044, China. *Email: [email protected] N0524 11:38-11:54 Experimental Investigation on the Energy Absorption of Foam Aluminum Cylinder at Moderate Deformation Rate R.Z. Xie1,*, J.Q. Jiang1, P. He, F.J. Zhang1 and X.C. Huang1

31/45 1Institute of Structural Mechanics, CAEP, Mianyang 621900, China. *Email: [email protected], [email protected] 15:54-16:04 Discussion

Session i: Ceramics: Modeling at Various Scales May 25 (Wed) 8:00-10:00 Room 4 Co-Chairs:Turner Joseph, Univ. of Nebraska-Lincoln, USA K. Panneerselvam, National Institute of Technology, India Keynote lecture 8:00-8:30 Atomistic Simulations of Silica and Silicate Glasses under a Tensile Load L. Adkins and A. N. Cormack Alfred University, USA. Email: [email protected] B0593 Keynote lecture 8:30-9:00 Studies on Self-assembled ZnO Nanorods/Nanowires Grown on Silicon Substrates by Electrochemical Deposition S. Spitsina1, I. Stateikina2, M. Chaker2, and M. Kahrizi*1 1Department of Electrical and Computer Engineering, Concordia University, 1515 St. Catherine West, S- EV005139, Montréal, Québec, Canada, H3G 2W1. 2INRS Énergie, Matériaux et Télécommunications, 1650 boul. Lionel Boulet, Varrennes, Québec, Canada, J3X 1S2. *Email: [email protected] J0292 9:00-9:16 Unusual Mechanical Behaviors of CrN Polymorphs from First Principles Y. Li1, Y.C. Liang*2, and S.M. Wang1 1College of Engineering Science and Technology, Shanghai Ocean University, Shanghai 201306, China; 2College of Engineering Science and Technology, Shanghai Ocean University, and State Key Laboratory of High Performance Ceramics and Superfine Microstructures, Shanghai Institute of Ceramics, CAS, Shanghai 200050, China. *E-mail: [email protected] B0305 9:16-9:32 Molecular Dynamics (MD) Simulation of Uniaxial Tension of Ceria and Gadolinia Doped Ceria (GDC) Y.J. Chen1, Y. Sun*1, Y.Z. Liu1, Z.W. Cui2 1Department of Astronautic Science and Mechanics, Harbin Institute of Technology, Harbin, 150001, China; 2Department of Civil and Environmental Engineering, Northwestern University, Evanston, USA. *Email: [email protected] B0256 9:32-9:48 Nanometer Aluminum Oxide Prepared by Detonation of Low Density Water-Gel Explosive R.Y. Li*1, X.J. Li2, and T. Chen2 1Department of Engineering Mechanics, College of Pipeline and Civil Engineering, China University of Petroleum (East China), Shandong Qingdao 266555, China; 2Department of Engineering Mechanics of Dalian University of Technology, State Key Laboratory of Structural Analysis for Industrial Equipment, Liaoning Dalian 116023, China. *Email: [email protected] 9:48-10:00 Cross discussion

Session j: Inorgancis, Polymers and Carbon-based Materials: Modeling at Various Scales May 25 (Wed) 10:20-11:50 Room 4 Co-Chairs: M. Kahrizi, Concordia University, Canada S. Yilmaz, Istanbul Technical University, TURKEY B0459 Keynote lecture 10:20-10:50 Molecular Mechanics and Continuum Mechanics Study of Buckling of Pre-Stressed Multi-Walled Carbon Nanotubes M.D. Ma2, L. Shen*1, L.F. Wang3 and Q.S. Zheng2 1School of Civil Engineering, University of Sydney, NSW 2006, Australia. 2Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China; 3Department of Mechanical Engineering,

32/45 Massachusetts Institute of Technology, Cambridge, Massachusetts 02139, USA. *Email: [email protected] E0480 Invited lecture 10:50-11:15 Wrinkling of Graphene Sheet under Constrained Extension via Atomistic and Continuum Mechanics Simulations X.Z. Zhou1, F.P. Zhao1, Z.H. Sun1, and H.A. Wu*1 1CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Modern Mechanics, University of Science and Technology of China, Hefei, Anhui 230027, China. *Email: [email protected] A0352 11:15-11:33 Physical Aging of Glassy Polyvinyl chloride in Non-uniform Stress Field F. Zhao1, H.J. Hu*1, Y.L. He1, J.Q. Zhang2, and Z.S. Guo1 1Shanghai Institute of Applied Mathematics and Mechanics, Shanghai University, Shanghai 200072, China; 2Department of Mechanics, Shanghai University, Shanghai 200444, China. *Email: [email protected] I0375 11:33-11:50 Analyses of Adhesive Contact Problem for Non-homogeneous Medium Based on a Multi- layer Model T. J. Liu*1, and L. Li1 1Mechanical department, College of Sciences of Inner Mongolia University of Technology, Huhhot, Inner Mongolia 010051, China. *Email: [email protected]

Session k: Synthetic Cellular Materials: Material Design May 26 (Thu) 10:20-12:20 Room 4 Co-Chairs: Licheng Guo, Harbin Institute of Technology Zhongchang Wang, Tohoku Univ. Japan A0381 Keynote lecture 10:20-10:50 Heterogeneous Topologically Interlocked Materials: A New Class of Heterogeneous Materials T. Siegmund1,* 1School of Mechanical Engineering, Purdue University, West Lafayette, Indiana, 47907, U.S.A. *Email: [email protected] J0297 10:50-11:10 Optimal Design of Energy Absorption Structures against Blast Resistance J. Yan1,* and K. Yan1 1State Key Lab. of Structural Analysis for Industrial Equip. Dept. of Engineering Mechanics, Dalian University of Technology, Dalian 116024, China. *Email: [email protected] O0738 11:10-11:30 Investigation of the Effective Properties of 3D Braided Composites with Distributed Pores by the Finite Element Method L.C. Guo*1, S.Y. Zhong2, and X.M. Bai3 1Department of Astronautic Science and Mechanics, Harbin Institute of Technology, Harbin 150001, P.R. China. *Email: [email protected] M0651 11:30-11:50 Modeling Stress Dependent Hysteretic SMA Behavior Based on a Block-spin-approach from Statistical Mechanics M. Leindl*1, M. Fischlschweiger2, and E.R. Oberaigner3 1Institute of Mechanics, University of Leoben, 8700 Leoben, Austria; 2Materials Center Leoben GmbH, 8700 Leoben, Austria, Centre des Matériaux, Mines ParisTech, CNRS UMR 7633 B.P.87, Evry Cedex 91003, France; 3Institute of Mechanics, University of Leoben, 8700 Leoben, Austria. *Email: [email protected] J0408 11:50-12:10 Heterogeneous Objects Design and Manufacturing: Multi-materials Three Dimensional Printing System Y.F. Zhu1,2, J.Q Yang2,3*, G.M. Fadel3 and C.M Wang1 1Nanjing University of Science and Technology, Nanjing, Jiangsu, China; 2Nanjing Normal University, Nanjing, Jiangsu, China; 3Clemson University, USA. *Email: [email protected]

33/45 12:10-12:20 Cross Discussion

Session l1: Geomaterials: Scale Effects and Multi-Scale Modeling May 23 (Mon) 8:00-10:00 Room 3 Co-Chairs: W. A. Curtin, Brown University, USA Yong Ni, The Univ. of Science and Technology of China E0706 Keynote lecture 8:00-8:30 A Kind of Physical Interpretations of Material Length Scales J.R. Song1, J.Y. Liu1 and Y.G. Wei*1 1State-Key Laboratory of Nonlinear Mechanics, Chinese Academy of Sciences, Beijing 100190, China. *Email: [email protected] H0356 8:30-8:46 Confinement Effects on the Dynamic Compressive Properties of Granite G. Chen*1, Y.C. Kuang2, A.M. Xu1, and P.H. Peng1 1Institute of Structural Mechanics, China Academy of Engineering Physics, Sichuan, 621900 China; 2Southwest Petroleum University, Sichuan, 610500, China. *Email: [email protected]

Z0652 8:46-9:02 Numerical Simulation for Heat-solid Coupling of Coal under Injecting Heat Y. Cheng*1 and Y.L. Zhang1 1College of Mechanics and Engineering, Liaoning Technical University, Fuxin 123000, China. *Email:[email protected] J0527 9:02-9:18 Increment Poisson’s Ratio for Frozen Clay with Thermal Gradient X.D. Zhao1,*, G.Q. Zhou1 and G. Z. Chen1 1State Key Laboratory for Geomechanics and Deep Underground Engineering, Xuzhou, Jiangsu 221008, China. *Email: [email protected] Q0264 9:18-9:34 Damage Process Analysis of Jointed Rock Mass Using FLAC/PFC Coupled Numerical Modeling of AE S.H. Wang*1, M.D. Guo, Y. Xu, P. R. Ranjith and H. Yang 1School of Resource & Civil Engineering, Northeastern University, Shenyang 110004, China. *Email: [email protected] 9:35-9:50 Discussion

Session l2: Geomaterials: Scale Effects and Multi-Scale Modeling May 23 (Mon) 10:20-12:00 Room 3 Co-Chairs: Yueguang Wei, State-Key Lab of Nonlinear Mechanics, Chinese Academy of Science Martin Petrenec, Institute of Physics of Materials, Czech Republic P0315 Invited lecture 10:20-10:45 The Reflection of Synergetic Features in the Response of Geological Medium on Outer Force Actions O.A. Hachay *1, O.Yu. Khachay2, V.K. Klimko3, O.V. Shipeev3 1Institute of Geophysics UB RAS, Yekaterinburg, 620016, Russia; 2Ural State University,Yekaterinburg, 620000, Russia; 3Tashtagol mine, 652970, Russia. *Email: [email protected] P0316 10:45-11:05 Dynamical Model for Evolution of Rock Massive State as a Response on a Changing of Stress-Deformed State O.A. Hachay*1, and A.Yu. Khachay2 1Institute of Geophysics UB RAS, Yekaterinburg, 620016, Russia; 2Ural State University, Yekaterinburg, 620000, Russia. *Email: [email protected] B0281 11:05-11:25 Hierarchical Failure Analysis and Optimal Toughness Design of Carbon Nanotube- reinforced Composites

34/45 Y.L. Chen*1, B. Liu2, Y. Huang3 and K.C. Hwang2 1The Ohio State University, Columbus, OH 43210, USA; 2Tsinghua University, Beijing 100084, China; 3Northwestern University, Evanston, IL 60208, USA. *Email: [email protected] P0478 11:25-11:45 Application of NCS Soil Agent in Treating the Super-wet Soil L.L. Zhang*1, B. Jiang1 1School of Civil Engineering and Architecture, Southwest University of Science and Technology, Mianyang 621010, China. *Email: [email protected] 11:45-12:00 Cross Discussion

Session l3: Geomaterials: Inelasticity, Damage and Failure May 23 (Mon) 13:40-15:40 Room 3 Co-Chairs: O.A. Hachay, Institute of Geophysics UB RAS, Russia J. G. Wang, Hefei Univ. of Technology P0374 13:40-13:55 Creep Damage Calculation Model of Quasi-soft soil B.L. Zhu1,* and X.Y. Wu2 1School of Civil Engineering and Architecture, Southwest University of Science and Technology, Mianyang, Sichuan 621010, China; 2Department of Geological Engineering, Southwest Jiaotong University, Chengdu, Sichuan 610031, China. *Email: [email protected] P0418 13:55-14:10 Test Study on Influence of Soaking in Acid/base Solution on Normal Deformation of Rock Fracture B.H. Guo*1, C.X. Tian2, and C.D. Su1 1School of Energy Science and Engineering, Henan Polytechnic University, Jiaozuo, Henan 454010, China; 2Institute of Resources & Environment, Henan Polytechnic University, Jiaozuo, Henan 454010, China. *Email: [email protected] V0373 14:10-14:25 Experimental Study on Rock Salt Dissolving Characteristics with Stress Effect Y. C. Tang*1, H. Zhou2 1Three Gorges University, Yichang 443002, China; 2Institute of Rock and Soil Mechanics, CAS, Wuhan 430074, China. *Email: [email protected] S0643 14:25-14:40 The consistent return mapping algorithm for an elasto-plastic constitutive model based on Disturbed State Concept and simulation of the strain localization in rockfill material Chu Xihua*, Chang Jiangfang, Jiang Qinghui, Xu Yuanjie Wuhan University, Wuhan, Hubei, China. *Email: [email protected] V0631 14:40-14:55 Study on Size Effects of Coal Intensity Based on Weibull Distribution Yong Wei Lan1,*, Hongmei Gao2 and Ji Tao Zhao2 1Resources and environmental engineering Heilongjiang Institute of Science and Technology, Ha’erbin, 150027, China; 2Heilongjiang Institute of Science and Technology, Ha’erbin, 150027, China. *Email: [email protected] W0412 15:55-15:10 Multiscale Modeling for Discussion about the Anisotropism of Spruce Wood Y.Z. Zhang*1, W.Z. Zhong1, and C.J. Chen1 1Institute of Structural Mechanics. China Academy of Engineering Physics. Mianyang, Sichuan, 621900, China. *Email: [email protected] A0282 15:10-15:25 Rate Dependent Deformation and Failure in Composite Microstructures under Impact Loading Yuli Chen1*, Somnath Ghosh1 1Department of Mechanical Engineering, The Ohio State University, Columbus, OH 43210, USA Email: [email protected] 15:25-15:40 Cross Discussion

35/45 Session m1: Smart Materials: Multi-Physics Modeling May 25 (Wed) 8:00-10:00 Room 5 Co-Chairs: Z. Zhong, Tongji University J. Wang, Los Alamos National Laboratory, USA M0330 Keynote lecture 8:00-8:30 Electromechanical Response of Multilayer Piezoelectric Actuators for Fuel Injectors from Room to Cryogenic Temperatures Y. Shindo*1, F. Narita1, K. Sato1, and T. Sasakura1 1Department of Materials Processing, Graduate School of Engineering, Tohoku University, Aoba-yama 6-6-02, Sendai 908-8579, Japan. *Email: [email protected] M0567 8:30-8:50 Optically-driven Reversible Deformations in Nematic Liquid Crystal Polymer Networks C.W. Xu1, Y. You1, Y. Lin1 and Y.Z. Huo*1 1Department of Mechanics and Engineering Science, Fudan University, Shanghai 200433, China. *Email: [email protected] F0511 8:50-9:50 Chemo-mechanical coupling induced self-oscillations in polymer gels Jinxiong Zhou* and Huibiao Li Xi’an Jiaotong University, Xi’an Shangxi, China. *Email: [email protected] X0554 9:10-9:30 Manufacture and Properties of Bonded NdFeB Magnets from Injection Molding J. He*1, W.Z. Qin1, and X.Y. Yang2 1Tianjin Vocational Institute, Tianjin 300410, China; 2Antai Highmag Technology Ltd , Shenzhen 518105, China. *Email: [email protected] X0569 9:30-9:50 Recursive Algorithm to Study Transmission Coefficients for P-SV Waves Propagating in 1D Inhomogeneous Phononic Crystals J.F. Zhao1, Y.D. Pan*1, Z. Zhong1 1Institue of Acoustics, Tongji University, Shanghai 200092, China. *Email: [email protected] 9:50-10:00 Cross Discussions

Session m2: Smart Materials: Actuation and Sensing May 25 (Wed) 10:20-12:20 Room 5 Co-Chairs: Y. Shindo, Tohoku University, Japan X. ZHANG, Texas A&M University, USA M0326 Invited lecture 10:20-10:45 A Nonlinear Constitutive Model for Nematic Gels Z. Wu1 and Z. Zhong1,* 1School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, China. *Email: [email protected] E0378 10:45-11:01 Two-scale Asymptotic Computations for Piezoelectric Problem in Perforated Structure Composite Y.P. Feng1,* and M.X. Deng1 1College of Mathematics and Information Science, Guangzhou University, Guangzhou, Guangdong 510006, China. *Email: [email protected] J0576 11:01-11:17 Study on the Molding Technology of Bonded NdFeB Magnets from Injection Molding W.Z. Qin*1, J. He2, and X.Y. Yang2 1Tianjin Vocational Institute, Tianjin 300410, China; 2Antai Highmag Technology Ltd, Shenzhen 518105, China. *Email: [email protected] W0633 11:17-11:33 Numerical Simulation on Soil Medium Hao Li*1, T.B. Ma2 1College of Science, Beijing University of Civil Engineering and Architecture, Beijing, 100044, China; 2State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing, 100081, China. *Email: [email protected]

36/45 E0573 11:33-11:50 The Effective Medium Theory of Granular Materials ZHEN Wen, XU Song-lin*, HU Shi-sheng University of Science and Technology of China, Hefei, Anhui, China. *Email: [email protected]

Session n1: Biomaterials: Modeling and Experiment (1) May 26 (Thu) 8:00-10:00 Room 6 Co-Chairs: L.H. Deng, Chongqing University C. T. Lim, National University of Singapore K0399 Invited lecture 8:00-8:25 Research on the Elastic and Plastic Deformation of CoCr Alloy Used for Coronary Stents H.Q. Feng1,*, F.F. Guo1, C.Z. Liu1 and S.Yamashita2 1Inner Mongolia University of Technology, Hohhoto 10051, China; 2Japan Stent Technology Co.Ltd, 5303 Haga Okayama 701-1221, Japan. *Email: [email protected] B0748 8:25-8:42 MD simulations of P-selectin - PSGL association kinetics Xiangyu Gu, Shouqin Lü, and Mian Long Institute of Mechanics, Chinese Academy of Sciences, China. Email: [email protected] L0501 8:42-9:59 Preliminary Study to Dynamic Mechanical Properties of the Fresh Swine Thighbone D.Q. Zhang1,*, G.P. Chen1 and D. Jia2 1Department of Civil Engineering and Architecture, Southwest University of Science and Technology, Mianyang, Sichuan 621010, China; 2Key Laboratory of Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei, Anhui, 230027, China. *Email: [email protected] K0768 8:59-9:16 Dynamic Shear Behavior of Soft Biological Tissues W.N. Chen1,*, X. Nie1 and B. Sanborn1 1Schools of Aeronautics/Astronautics and Materials Engineering, Purdue University, West Lafayette, IN 47907-2045, USA. *Email: [email protected] K0656 9:16-9:33 Experimental Study on the Cooling Effect around Large Vessels While Tissue Heating by Using U-tube Phantom L.Z. Mu1, Y. He1,*, Y. Peng1 and C.F. Li1 1Department of Modern Mechanics, University of Science and Technology of China, Hefei, Anhui 230027, China. *Email: [email protected] K0453 9:33-9:50 Adhesive Mechanisms of a Bio-inspired Nano-film S.H. Chen*1 and Z.L. Peng1 1LNM, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100190, China. *Email: [email protected] 9:50-10:00 Cross discussion

Session n2: Biomaterials: Modeling and Experiment (2) May 26 (Thu) 10:20-12:20 Room 6 Co-Chairs: W.N. Chen, Purdue University, USA S. Paulraj of National Institute of Technology, India L0588 Invited lecture 10:20-10:45 Fracture Mechanics Model of Nacre X.Q. Feng1,* and Y. Shao1 1Institutive of Biomechanics and Medical Engineering, Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China. *Email: [email protected] K0715 Invited lecture 10:45-11:10 Application of Cell Mechanics in Disease Detection & Diagnosis C.T. Lim1,* 1Mechanobiology Institute, Division of Bioengineering & Department of Mechanical Engineering, National University of Singapore, Singapore 117576. *Email: [email protected]

37/45 L0767 Invited lecture 11:10-11:35 Multiscale Biomechanical Behaviors of Heterogeneous Airway Smooth Muscle Cells L.H. Deng1,*, X.M. Jiang1, C. Chen1, J.M. Xu1, Y.L. Shi1 and Y.H. Zhao1 1Key Laboratory of Biorheological Science and Technology, Bioengineering College, Chongqing University, Chongqing, 400044, China. *Email: [email protected] B0676 11:35-11:55 Friction Enhanced Adhesion in Biomimetic Nanostructures S.H. Hu1, and Z.H. Xia2,* 1Department of Mechanical Engineering, The University of Akron, Akron, OH 44325, USA; 2Department of Materials Science and Engineering, University of North Texas, Denton, TX 76210, USA. *Email: [email protected] B0627 11:55-12:15 Nonlinear Flexoelectric Model for Nanomechanical Analysis of Double-Stranded DNA Chips L.W. Xu1, J.J. Li1 and N.H. Zhang1,* 1Shanghai Key Laboratory of Mechanics in Energy Engineering, Shanghai Institute of Applied Mathematics and Mechanics, Shanghai University, Shanghai 200072, China; Department of Mechanics, College of Sciences, Shanghai University, Shanghai 200444, China. *Email: [email protected] 12:15-12:25 Cross Discussions

Session o1: Energy: Special session on nanostructured batteries May 24 (Tue) 8:00-10:00 Room 2 Chair: Ting Zhu, Georgia Institute of Technology, USA 8:00-8:28 Invited lecture Mechanics of Strongly-Coupled Diffusion, Stress, Deformation and Fracture at High Solute Concentration: Applications in Battery Electrodes Huajian Gao School of Engineering, Brown University, USA. Email: [email protected] #0772 8:28-8:56 Invited lecture Li-induced plastic deformation in Lithium ion nanobatary

Scott X. Mao1, Li Zhong1, Guofeng Wang1, Jian Yu Huang2 1Department of Mechanical Engineering & Materials Science, USA. Email: [email protected] 8:56-9:23 Invited lecture In situ Nanomechanics of Battery Electrodes Ting Zhu1, Jianyu Huang2 and Ju Li3 1Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USA; 2Center for Integrated Nanotechnologies, Sandia National Laboratories, Albuquerque, New Mexico 87185, USA; 3Department of Materials Science and Engineering, University of Pennsylvania, Philadelphia, Pennsylvania 19104, USA. Email: [email protected] 9:23-9:50 Invited lecture Modeling and Visualization of Graphite Electrode Deformation during Li Insertion Y. Qi*, H. Guo, L.G. Hector, Jr., A. Timmons, and S.J. Harris General Motors R&D Center, Warren, MI, 48090 USA. *Email: [email protected] 9:50-10:00 Cross discussion

Session o2: Energy: Batteries and Fuel Cells May 24 (Tue) 10:20-12:20 Room 4 Co-Chairs: Scott X. Mao, Univerisity of Pittsburgh, USA Q. Yue, General Motors Corporation, USA F0436 Keynote lecture 10:20-10:50 Void Formation and Surface Roughening in Amorphous Li-Alloy Electrodes Y.F. Gao1 and M. Zhou*1 1The George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA

38/45 30332-0405, USA. *Email: [email protected] #0255 10:50-11:07 Cycling effects on morphology, interfacial properties and electrochemical performance of RuO2 anode film in lithium ion microbatteries Jing Zhu, Kaiyang Zeng, Li Lu* National University of Singapore, Singapore. *Email: [email protected] 11:07--11:24 Interactive Simulation and Fabrication of Porous Materials for Next-Generation Electrodes L. He1, R. Stewart1, D. Liu2, J. Fan1* 1Inamori School of Engineering, Alfred University, New York; 2 School of Engineering, Brown University. USA, *Email: [email protected]; #0771 11:24-11:40 Reducing the Lithiation induced stress in Lithium Battery by shape design Y.C. Song*1 1Department of Mechanics, Shanghai University, Shanghai 200444, China. *Email: [email protected] B0542 11:40-11:56 Active Cathode of Lithium Battery for Electric Vehicle X.H. Xie*1, S.Y. Liu1, J. Xie2, M.C. Yin1, and S.L.Yan1 1School of Chemical Engineering, Anhui University of Science and Technology, Huainan, Anhui 232001, China; 2School of Journalism, Fudan University of Science and Technology, Room 606, Building 17, GuoDing Road 440, YangPu District, Shanghai, 200433, China. *Email: [email protected] Z0449 11:56-12:12 Porous Material Modeling and Electrical Characteristics Parametric Analysis of A Planar Solid Oxide Fuel Cell with Gradual Porosity Based on Finite Element Method K. Lou1,*, F.H. Wang1 and M. Li1 1Department of Engineering Mechanics, Northwestern Polytechnical University, Xi’an, 710072, China. *Email: [email protected] 12:12-12:22 Cross discussion

Session p1: Damage and Failure (1) May 26 (Thu) 8:00-10:00 Room 4 Co-Chairs: Ning Hu, Chiba University, Japan L.Z. Wu, Harbin Institute of Technology O0712 Invited lecture 8:00-8:25 Fracture Mechanics of Composite Materials with Complex Interfaces L.Z. Wu1,*, H.J. Yu1, L.C. Guo1 and S.Y. Du1 1Center for composite materials, Harbin Institute of Technology, Harbin 150001, China. *Email: [email protected] O0483 8:25-8:42 Initial Cracking of RC Beams Strengthened by Prestressed AFRP Sheet under Four-point Bending Y.Y. Kuang1,*, Q.D. Zeng1, and Y.L. Zhou1 1School of Civil Engineering and Transportation, South China University of Technology, Guangzhou 510640, China. *Email: [email protected] O0487 8:42-8:59 Concrete Crack Propagation Study with Experiment and Extended Finite Element Modeling N.L. Zhang1 and X.M. Guo1,* 1Southeast University, Nanjing, Jiangsu 210096, China. *Email: [email protected] W0761 8:59-9:16 Application of XFEM in Metal Fracture Analysis Peng Wang1,*, M.J. Hu1 and S.Y. Song1 1Key Laboratory for Mechanical & Environment Behavior of Tubular Goods, CNPC Tubular Goods Research Institute, Xi’an 710065, China. *Email: [email protected] W0765 9:16-9:33 Discrete Element Modeling of Three-Dimensional Impact Problems Including Elastoplastic Deformations and Severe Damages L. Shan1, M. Cheng1 and K.X. Liu2,*

39/45 1LTCS and Department of Mechanics & Aerospace Engineering, College of Engineering, Peking University, Beijing 100871, China; 2Center for Applied Physics and Technology, Peking University, Beijing 100871, China. *Email: [email protected] S0294 9:33-9:50 Corrosion Behavior of AA6061-T6 Alloy in the Ethylene Glycol-Water Solution D Q Zhang*1, X Jin, H G Joo, L X Gao, K Y Lee*2 1Department of Environmental Engineering, Shanghai University of Electric Power, Shanghai 200090, China; 2School of Mechanical Engineering, Yonsei University, Seoul, South Korea. *Email: [email protected] 9:50-10:00 Cross Discussions

Session p2: Damage and Failure (2) May 26 (Thu) 10:20-12:20 Room 3 Co-Chairs: Yichun Zhou, Xiangtan University Kazuaka Sanada, Toyama Prefectural Univ. Japan I0622 Invited lecture 10:20-10:45 Failure Mechanisms and Life Prediction of Thermal Barrier Coatings Y.C. Zhou1,*, Q. X. Liu1, L. Yang1, D. J. Wu1 and W. G. Mao1 1Faculty of Materials, Optoelectronics and Physics, Xiangtan University, Key Laboratory of Low Dimensional Materials and Application Technology of Ministry of Education, Xiangtan University, Xiangtan, 411105, China. *E-mail: [email protected] O0301 10:45-11:02 Fracture Behavior of Three-dimensional Braided Composites H.G. Li1,*, L.C. Guo1 and H.J. Yu2 1Department of Astronautic Science and Mechanics, Harbin Institute of Technology, Harbin 150001, China; 2Center for composite materials, Harbin Institute of Technology, Harbin 150001, China. *Email: [email protected] O0611 11:02-11:19 Research Progress of Honeycomb Core Failure Analysis for Sandwich Structures Z.Q. Chen1, G.Q. Yuan1,*, X.Y. Liu2, and D.M. Xu2 1School of Aerospace Engineering and Applied Mechanics, TongJi University, Shanghai 200092, China; 2Shanghai Aircraft Design and Research Institute, Shanghai 200232, China. *Email: [email protected] O0686 11:19-11:36 Effect of Chosen Damage Initiation Criteria of Constituents on the Predicted Strength of 3D Fine Woven Punctured C/C Composites Q. Lu1,*, J. Liang1, and G.D. Fang1 1Center for composite materials and structure, Harbin Institute of Technology, Harbin 150001, China. *Email: [email protected] O0499 11:36-11:53 Mechanical Response and Failure Mechanism of Fiber Reinforced Composite Truss Core Sandwich Structures L. Ma1,*, J. Xiong1, M. Li2 and L.-Z. Wu1 1Center for Composite Materials, Harbin Institute of Technology, Harbin 150080, China; 2 No. 201 Faculty, Xi’an Research Institute of High-tech, Xi’an 710025, China. *Email: [email protected] E0571 11:53-12:10 Compression Responses of Brittle Granular Materials Subjected to Dynamic Loading J.Y. Huang1,* , S.L. Xu1, W. Zheng1, and S.S. Hu1 1CAS Key Laboratory Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei, Anhui 230026, China. *Email: [email protected] 12:10-12:20 Cross Discussions

Session q1: Plasticity and Creep (1) May 25 (Wed) 13:30-16:00 Room 4 Co-Chairs: J. Z. Cui, Institute of Computational Mathematics and Scientific/Engineering Computing, Chinese Academy of Sciences

40/45 Qingping Sun, the Hong Kong Univ. of Sci. and Tech. Q0699 Keynote lecture 13:30-14:00 Coupled Crystal Plasticity-Phase Field Formulation to Describe the Microstructural Evolution in Polycrystalline Aggregates During Recrystalisation E.P. Busso1, G. Abrivard1 and S. Forest1 1Centre des Matériaux, Mines ParisTech, UMR CNRS 7633, B.P. 87, 91003 Evry Cedex, France. Email: [email protected] H0654 Invited lecture 14:00-14:25 A Phenomenological Mean Field Model for Coupling Phase Transformation with Plasticity M. Fischlschweiger1,*, G. Cailletaud2, T. Antretter 3and E.R. Oberaigner3 1Materials Center Leoben Forschung GmbH, 8700 Leoben, Centre des Matériaux, Mines ParisTech, CNRS UMR 7633 B.P.87, Evry Cedex 91003, France; 2Centre des Matériaux, Mines ParisTech, CNRS UMR 7633 B.P.87, Evry Cedex 91003, France; 3Institute of Mechanics, University of Leoben, Franz-Josef-Straße 18, 8700 Leoben, Austria. *Email: [email protected] D0491 14:25-14:45 A Strategy to Multi-scale Modeling of Stochastic Heterogeneous Material S.J. Zeng1, and J. Li*1 1School of Civil Engineering, Tongji University, 1239 Siping Road, Shanghai 200092, China. *Email: [email protected] B0770 14:45-15:05 Effects of ultrafine nanograins on the fracture toughness of nanocrystalline materials Y.G. Liu1, and J.Q. Zhou*2 1Department of Mechanical Engineering, Nanjing University of Technology, Nanjing 210009, Jiangsu, China; 2Department of Mechanical Engineering, Nanjing University of Technology, Nanjing 210009, Jiangsu, China. *Email: [email protected] O0290 15:05-15:25 Cavitated Bifurcation for Two-family Fiber-reinforced Incompressible Hyper-elastic Materials J.S. Ren1,*, J.W. Zhou1 and X.G. Yuan2 1Department of Mechanics, Shanghai University, Shanghai 200444, China; 2College of Science, Dalian Nationalities University, Liaoning Dalian 116600, China. *E-mail: jsren @shu.edu.cn W0708 15:25-15:45 Mesoscopic Constitutive Modeling of Corroded Concrete Based on CT H.K. Liu1 and J. Li2,* 1School of Civil Engineering, Tongji University, 1239 Siping Road, Shanghai 200092, China; 2State Key Laboratory of Disaster Reduction in Civil Engineering, Tongji University, 1239 Siping Road, Shanghai 200092, China. Email: [email protected] 15:45-16:00 Cross Discussion

Session q2: Plasticity and Creep (2) May 26 (Thu) 8:00-10:00 Room 5 Co-Chairs: Esteban Busso, Centre des Materiaux, Mines, Paris, France M. Fischlschweiger, Materials Center Leoben Forschung GmbH, AUSTRIA F0697 Keynote lecture 8:00-8:30 Stress-dependent Chemical Potentials and Their Applications Crystaline Solids J.M. Qu1,* 1Department of Civil and Environmental Engineering, Department of Mechanical Engineering, Northwestern University, Evanston, IL, USA. *Email: [email protected] X0403 Invited lecture 8:30-8:55 Some Modifications in Continuum Thermodynamics and their Applications Zhenbang Kuang1,* 1Department of Engineering Mechanics, Shanghai Jiaotong University, Shanghai 200240, China. *Email: [email protected]

41/45 O0621 8:55-9:12 SHPB Test on Dynamical Mechanical Behavior of Concrete with High Temperature J. Bin1,*, X.Q. Chen1, P. Liu1 and L. Wang1 1Department of Civil Engineering and Architecture, Southwest University of Science and Technology, MianYang, 621010, SiChuan, China. *Email: [email protected] V0448 9:12-9:29 Significance Analysis of Weld and Processing Parameters on Wall Thinning and Cross- sectional Deformation of Welded Tube in NC Bending Process N. Ren1, M. Zhan1, H. Yang*1, Z.Y. Zhang1, H.M. Jiang2, K.S. Diao2, and X.P. Chen2 1State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi’an, 710072, China; 2Baosteel Group Corporation, Shanghai, 200122, PR China. *Email: [email protected] H0711 9:29-9:46 Nearly frictionless plastic flow within annular micropores K.H. Chu1,* 1School of Mathematics, Physics, and Biological Engineering, Inner Mongolia University of Science and Technology, Baotou 014010, P.R. China. *Email: [email protected] 9:46-10:00 Cross Discussion

Session q3: Plasticity and Creep (3) May 26 (Thu) 10:20-12:20 Room 5 Co-Chairs: Jianmin Qu, Northwestern University, USA Kang Yong Lee, Yonsei University, Korea E0260 Keynote lecture 10:20-10:50 Heterogeneous Deformation of Polycrystals Simulated with Micropolar Single Crystal Plasticity J. R. Mayeur1 and D. L. McDowell*2 1Theoretical Division, Los Alamos National Laboratory, Los Alamos, NM 87545, USA; 2Woodruff School of Mechanical Engineering and School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USA. *Email: [email protected] I0628 10:50-11:10 Strain Gradient Solution for the Eshelby-Type Problem of an Anti-Plane Strain Cylindrical Inclusion in a Finite Elastic Matrix H.M. Ma1 and X.L. Gao2,* 1Zodiac Aerospace Corporation, Logan, NJ 08085, USA; 2Department of Mechanical Engineering, Texas A&M University, College Station, TX 77843-3123, USA. * E-mail: [email protected] V0606 11:10-11:30 Nonlinear FEM Analysis and Experiment Research on Mechanical Behavior of Beam- Column Joint of Concrete-Filled Tube Composite Material T. Zhou1,*, J.G. Wang1 and H.Y. Wan1 1School of Civil Engineering, Hefei University of Technology, Hefei Anhui 230001, China Doctor. *Email: [email protected] V0349 11:30-11:50 Study on Impact Resistance Properties of Key Structure With the Dynamic Photoelastic Experimental Method G.B. Yang1,*, B. Li, F. Ni and Q.R. Zhu 1School of Aerospace Engineering and Applied Mechanics, Tongji University, No.1239, Siping Road, Shanghai, China, 200092. *Email: [email protected] V0369 11:50-12:10 In-Situ Measurement of Local Zones’ Stress-strain Curves in Welded Joint by using Instrumented Double Holes Micro-shear Test L. Zhu1,*, J.M. Hao1 and X.X. Jiang1 1State Key Laboratory of Gansu Advanced Non-ferrous Metal Materials, Lanzhou University of Technology, Lanzhou 730050, china. *Email: [email protected] 12:10-12:20 Cross Discussion

Session r1: Material Design and Structure Behavior (1) May 25 (Wed) 8:00-10:00 Room 6

42/45 Co-Chairs: J.L. Chaboche, ONERA, France Xiangguo Zeng, Sichuan University J0717 Keynote lecture 8:00-8:30 Design and Mechanical Characterization of Lattice Sandwich Cylindrical Shells D.N. Fang1,2*, L.M. Chen2, Z. Dai2 and H.L. Fan2 1LTCS, College of Engineering, Peking University, Beijing 100084, China; 2Department of Engineering Mechanics, AML, Tsinghua University, Beijing 100084, China. *Email: [email protected]; [email protected] 8:30-8:55 Invited speech The effective dynamic property of inhomogeneous materials under plane stress waves X.D. Wang* and S. Gan Department of Mechanical Engineering, University of Alberta Edmonton, Alberta, Canada T6G 2G8. *Email: [email protected] V0704 8:55-9:13 Optimization of End Milling Parameters for Glass Fiber Reinforced Plastic (GFRP) Using Grey Relational Analysis K.Panneerselvam1,*, S.Aravindan2 and A. Noorul Haq1 1Department of Production Engineering, National Institute of Technology, Tiruchirappalli-620 015, Tamilnadu, INDIA; 2Department of Mechanical Engineering, Indian Institute of Technology, Delhi, New Delhi-110016, INDIA. *Email: [email protected] O0718 9:13-9:31 New Optimal Design of Sandwich Structures with Modified Pyramidal Lattice Cores S.D. Pan1,2*, J.C. Feng1 and L.Z. Wu2 1School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001, China; 2Center for Composite Materials and Structures, Harbin Institute of Technology, Harbin 150001, China. *Email: [email protected] A0685 9:31-9:49 Phase Field Modeling of Inhomogeneous Deformation in Amorphous Materials Yong Ni1,*, Armen G. Khachaturyan2 1CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Modern Mechanics, University of Science and Technology of China, Hefei, Anhui, 230026, P.R.China; 2Department of Materials Science & Engineering, Rutgers University, 607 Taylor Road, Piscataway, NJ 08854, USA *Email: [email protected] 9:50-10:00 Cross discussion

Session r2: Material Design and Structure Behavior (2) May 25 (Wed) 10:20-11:50 Room 6 Co-Chairs: Liansheng Ma, Lanzhou University of Technology T. Ramesh, National Institute of Technology, India A0510 Invited lecture 10:20-10:45 Combined Self-Consistent and Mori-Tanaka Approach for Mechanical Properties of Particulate Composites and Applications X. Peng1,*, X. Long1 and N. Hu2 1Department of Engineering Mechanics, Chongqing University, Chongqing 400044, China; 2Department of Mechanical Engineering, Chiba University, 1-33 Yayoi, Inage-ku, Chiba, 263-8522, Japan. *Email: [email protected] O0682 10:45-11:01 Advanced Welding of Composite Material K. Panneerselvam1,*, S. Aravindan2 and A. Noorul Haq1 1Department of Production Engineering, National Institute of Technology, Tiruchirappalli-620015, Tamilnadu, INDIA; 2Department of Mechanical Engineering, Indian Institute of Technology, Delhi, New Delhi-110016, INDIA. *Email: [email protected] O0710 11:01-11:17 Three-dimensional Exact Solution for the Thermo-mechanical Stresses in Cross-ply

43/45 Rectangular Laminated Plates Y.Z. Chang1,*, Z.S. Shao1 and L.L. Wang1 1School of Civil Engineering, Xi’an University of Architecture & Technology, Xi’an 710055, China. *Email: [email protected] O0719 11:17-11:33 Strengthening Design for Carbon Fiber Reinforced Composite Pyramidal Lattice Structure S.Yin1, L.Z. Wu1 and L. Ma1 1Center for Composite Materials, Harbin Institute of Technology, Harbin, Heilongjiang150080, China. *Email: [email protected] X0739 11:33-11:50 Transient Investigations of Functionally Graded Materials with Arbitrary Properties L.C. Guo1,*, X. M. Bai1, S.Y. Zhong 1and Z.H. Wang1 1Department of Astronautic Science and Mechanics, Harbin Institute of Technology, Harbin 150001, P.R. China. *Email: [email protected]

Session r3: Material Design and Structure Behavior (3) May 25 (Wed) 13:30-16:00 Room 6 Co-Chairs: D.N. Fang, Peking University and Tsinghua University A. Brückner-Foit, University of Kassel, Germany J0769 13:30-13:46 Design of Composite Materials with Optimal Stiffness and Thermal Conductivities X.Y. Yang1,*, X. Huang1, Y.M. Xie1, Q. Li2 and J.H. Rong3 1School of Civil, Environmental and Chemical Engineering, RMIT University, GPO Box 2476, Melbourne 3001, Australia; 2School of Aerospace, Mechanical and Mechatronic Engineering, The University of Sydney, NSW 2006, Australia; 3Changsha University of Science and Technology, Changsha 410076, China. *Email: [email protected] O0679 13:46-14:02 Experimental Studies and Numerical Simulation of Compressibility of Al – 10% Cu Powder Metallurgy Composites T. Ramesh1,*, R. Narayanasamy2 and R. Bharanidaran1 1Department of Mechanical Engineering, National Institute of Technology, Tiruchirappalli – 620 015,Tamilnadu, India; 2Department of Production Engineering, National Institute of Technology, Tiruchirappalli – 620 015, Tamilnadu, India. *Email: [email protected] Z0440 14:02-14:18 Dynamic Response of Circular Sandwich Plate Subjected to Blast Loading J.X. Zhang1,*, Q.H. Qin1, T. Wang 1,2 and T.J. Wang1 1SV Lab, Department of Engineering Mechanics, Xi’an Jiaotong University, Xi’an 710049, China; 2Department of Engineering Physics, Xi’an Research Institute of High-Tech., Xi’an 710025, China. *Email: [email protected] X0328 14:18-14:34 Analytical Solutions for Vibration near the Buckled Configuration of FGM Beams under an In-Plane Thermal Loading L.S. Ma1,* 1School of Science, Lanzhou University of Technology, Lanzhou 730050, China. *Email: [email protected] O0709 14:34-14:50 Theoretical Investigation into the Thermo-mechanical Stresses in Cross-ply Laminated Composite Cylinder with Finite Length L.L. Wang1,*, Z.S. Shao1 and Y.Z. Chang1 1School of Civil Engineering, Xi’an University of Architecture & Technology, Xi’an 710055, China. *Email: [email protected] O0317 14:50-15:06 Static Deformations of Annular Sectorial Plates with Material Inhomogeneity G.J. Nie1,* and Z. Zhong1 1School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, China. *Email: [email protected]

44/45 #0513 15:06-15:22 Influences of applied electric fields on thermoelectric properties of P-type bulk polycrystalline materials X.D. Jia 1and Y.W. Gao1,* 1Key Laboratory of Mechanics on Western Disaster and Environment, Ministry of Education and College of Civil Engineering and Mechanics, Lanzhou University, Lanzhou 730000, China. *Email: [email protected] A0321 15:22-15:38 A Calculation Approach of the Stiffness Tensor of Spherical Particulate Composites: The Effects of the Reinforcements Arrangement S. Yilmaz1 1Department of Mechanical Engineering, Istanbul Technical University, Istanbul 34437, Turkiye – Turkey. *Email: [email protected] U0493 11:38-11:54 Stress Level Monitoring in Steel Tension Rod Based on Ultrasonic Guided Wave Technique B. Wu1,*, F. Liu1 and C.F. He1 1College of Mechanical Engineering & Applied Electronic Technology, Beijing University of Technology, Beijing 100124, China. *Email: [email protected] 15:54-16:04 Cross discussion

45/45