EZ Lift Leveling Kits

Ford F-250/350 2005-2011 4WD Only 2.5” Lift

1. Jack up front of vehicle and remove the front wheels.

2. Used a jack stand to secure vehicle before installing leveling kit.

3. Remove the lower shock bolt on both sides of the front axle.

4. With the jack still supporting the axle, unbolt the brake line support bracket from the frame on both sides. 5. Remove upper track bar bolt. Remove sway bar end link bolt on both sides.

6. Lower differential down and remove factory coil springs.

7. Install EZ Lift coil spring spacer on top of the factory coil spring. 8. Lineup the top and bottom of the coil spring and spacer and raise front axle back up.

9. Reinstall track bar using factory hardware.

10. Reinstall lower shock bolt using factory hardware.

11. Reinstall factory sway bar end links.

12. Reinstall front to wheels to factory specs and lower vehicle off of the jacks.

**Notes**

 Vehicle MUST be realigned to factory specs

 Kit is designed to allow use of up to a 35” tall tire.