7330 John Deere Tractor

New Compact Track Loader comparable to a Terex PT-110G Forestry and attachments to reasonably comply with the following specifications

Track Loader Operating Specifications Operating Weight – 12100lbs Ground Pressure at operating weight – 4.5 psi Tipping Load – 8600lbs Operating capacity 50% tipping load – 4300lbs Travel speed low range – 0-6mph Travel speed high range – 0-10mph Ground Clearance – 14.75in Forestry Guarding – FOPS Level 2 cab, integrated rear brush guard, limb risers, full cab protection, hydraulic coupler guard, air conditioner guard, heavy duty polycarbonate door, and heavy duty hinged skid plates Engine Diesel turbocharged liquid cooled Model – Perkins Tier 4i diesel engine Cylinders/Displacement – 3.4L Gross Power rating @ 2200rpm – 111 HP Torque peak – 332 ft-lb (420 Nm) Cooling System – Hydraulic reversing fan and coolant/antifreeze filled radiator Engine block heater – Standard ac plug-in type Transmission Hydrostatic transmission and 2-speed Auxiliary Hydraulic System Pump Capacity – Low (0-20gpm), High (30-45gpm) Controls – Intermittent via joystick button or continuous via console switch, mode selectable via dash-mounted switch Couplers – Push-to-connect flat-faced quick couplers mounted on loader arms. Pressure relief valve mounted to coupler block. Cooling system – High efficiency side-by-side radiator and oil cooler Service Capacities Fuel Tank Capacity, U.S. gal.: 30 gal. Hydraulic tank – 22 gal Engine Coolant/antifreeze – 4.3 gal Engine oil including filter – 9 quarts Undercarriage Track type – General purpose track constructed of rubber compound with embedded co- polymer cords and all-purpose treads. Three rows of track drive lugs molded in. Track width – 20 inches minimum Drive system – 2-speed radial piston motors connected to planetary reduction final drives Track drive sprocket – elevated with low friction replaceable sprocket rollers Undercarriage suspension – 2 independent torsion axles suspend each track frame plus 4 independent wheel carriages (4 wheels each) per track Roller wheels – 24 high-density polyurethane and rubber wheels per track. Wheel bearings protected by metal-faced seals Electrical System Nominal charge – 12V Battery – 950 CCA Charging System – 120amp alternator Outlets – (1) 12V port inside operator station Operator Station Cab – Sealed and Pressurized cab, with sound insulation Seat – Adjustable air suspension contour vinyl seat with built-in operator presence switch Loader controls – Right-hand electric over hydraulic controls loader lift/lower and tilt, plus intermittent control of auxiliary hydraulic Drive control – Left-handed pilot electric over hydraulic controls machine speed and direction. Selectable control pattern from ISO to H. Engine Speed – Foot pedal Indicator/gauges – Fuel Level, tachometer, Hour meter, coolant Temp. Gauge, Engine Oil pressure Warning, Battery Low Voltage Indicator, Two-speed indicator ROPS and FOPS – Meets SAE and ISO Standards Illumination – 2-fixed forward-facing halogen lights, 2 rear-facing halogen lights, 1 interior light Required Options Radio: Industrial radio Installed Heater and Air conditioning system 2” rear receiver hitch Horn and back-up alarm Rear view mirror Bottle Holder Rear bumper tie downs Construction Attachments or equivalent severe x-treme duty 4-in-1 multi-purpose bucket – 84 in width and Eight (8) large bolt on teeth

Attachments: Forestry Mulcher (Fecon Brand or Equivalent) Overall width – 74 inches Cutting width – 61 inches Number of Tools – 36+ Weight – 2375 lbs. Variable displacement motor Hydraulic brake Pressure Gauge Hydraulic trap door Floating bearings Push bar at 54” high Backhoe (Bradco 6120 or equivalent) Dual cylinder swing Cushioned swing bringing backhoe to gentle stop at end of swing arc All necessary electrical and mechanical connections to connect to above track loader Transport lock-up Dimensions Digging Depth – 12ft 1in Ground Clearance – 10in Reach from Swing post – 15ft 1in Swing arc – 180° Stabilizer below Grade – 18in Digging Force-bucket cylinder – 6200lbs Digging Force-dipper cylinder – 4102lbs Options Hydraulic Thumb 24in heavy duty bucket with teeth 12in heavy duty bucket with teeth Dozer Blade (Bradco ATP 84 or equivalent) 84in working width 10° tilt 30° angle right and left Slope gauge Eight (8)in bolt on cutting edge

Trade-in equipment: 2004 RC 85 ASV track loader 1000 hours Tracks replaced at 950 hours Enclosed cab with heater and air conditioning 2004 ASV Positool 72 72in working width with bolt on tooth bar 2004 Ammbusher PT720HF rotary brush mower 2003 Dymax 14in treeshear with brush guard and sprayer

*ALL BIDS MUST INCLUDE FACTORY SETUP AND DELIVERY *Must have factory authorized parts and service within 75 miles of Valley Falls, KS

Successful bidder will be responsible for ALL pickup and delivery transportation for warranty work.

Delivery contact:

Dustin Mengarelli Public Land Manager Perry Wildlife Area 7760 174th Road Valley Falls, KS 66088 785-945-6615 [email protected]