Job Technical Review Questionnaire

WINDOW WALL PROJECT ENGINEERING REVIEW & REQUEST FOR QUOTE NOTE: All window wall projects are to be reviewed prior to submitting RFQ to estimating. Information highlighted in yellow is required to review and quote; other information is helpful. Include all supporting documentation. Please email information to: [email protected].

Project Information:

Project Name: Date: 3/3/2015

Project Number: Dealer/Installer:

Project Address: Contact Person:

City, State: Address:

Project Phone: City, State:

Owner/Developer: Phone/Fax: Owner/Developer Email: Consultant: Architect: Sales Person: Architect Project Manager: Consultant: General Project Engineer: Contractor:

Documents Available and Estimating Information:

Window Specification: Other Specifications: Bid Required Date:

Glass Specification: Describe: Actual Bid Date: Architectural Previous Design Work: Product Required Date: Drawings: (Attach) Curtain Wall/Storefront Structural Drawings: Type of construction: Pricing Required: Shop Drawings: If so, was it sent to CWS: Quote Type:

Stamped Calculations: Project Status: Internal Use Only: Estimated Total Square Take-off: Quote Number: Footage:

1551 Mount Rose Avenue, York, PA 17403-2929 105 Mahoning Avenue, New Castle, PA 16102 Page 1 of 5 WINDOW WALL PROJECT ENGINEERING REVIEW & REQUEST FOR QUOTE

Performance Requirements: Comments: Meet Spec: Project Design Wind Load: psf Corner Zone Wind Load: psf Wind Tunnel Study: Performance Class: Air Infiltration: cfm/sqft

@ psf Water: psf If other, specify: Deflection: L / Special Structural Load: Specify: Blast Rated: Pressure: Impulse: psi Hurricane Rated: Large Missile: Small Missile: Rating: Acoustic Requirements: STC: OITC: Thermal Requirements: U Value: Glass Property Requirements: SHGC: VLT: Condensation Requirements: CRF: CR: Operating Force Requirements: Specify: Forced Entry Level Requirements: Specify: Applicable Building Codes: Specify: Local Code Requirements: Specify: LEED Requirements: Specify: Shop Drawings: Supplied By: Structural Calculations: Supplied By: Proposal Drawings: Visual Mock-up or Pilot: Lab Testing (Graham Lab): Formal Testing: Full Scale Mock-up and Testing: Field Testing: AAMA 502:

Reduction Allowed: Submittal Requirements: NFRC Labels: Building Information: (For ASCE 7 Design Wind Load Calculation, if necessary) Basic Wind Speed: mph Building Category:

Exposure Category: Height of building: ft. Least width of building: ft. Roof Type: Specify, if sloped: Live Load Deflection: Specify: in.

Product Requirements: Comments: Meet Spec: Window Wall: Series: Sizes provided are: Windows: Series: Sizes provided are: Curtain Wall: Quoted by CWS: Storefront: Quoted by CWS: Entrances: Quoted by CWS: Note: Attach Elevations (Exhibit A) and Spreadsheet (Exhibit B) indicating type, size, layout and quantity of products. Painted Finish: Standard: Custom: Exterior UC #: Type: XL: Exotic or Metallic: Interior UC #: Type: XL: Exotic or Metallic: Anodize Finish: Exterior Anodize: Type: If color, specify: Interior Anodize: Type: If color, specify: Glazing: Unglazed: Supplied by Others, Glazed in Field by Others Single: IGU: Exterior: Gas Fill: Interior: Special IGU: Exterior: Gas Fill: Interior: Insulated Metal Panels: Type: Louvers: Type: Blinds: Type: Muntins: Type: If other, describe: Other: Type: Screens: Type: Infill: Describe: Hardware: Standard: Description:

Custom/Special: Description: Mullion: Wide Vertical: Extrusion/Description: Qty in Ft: Demising: Extrusion/Description: Qty in Ft: Outside Corner: Extrusion/Description: Qty in Ft: Inside Corner: Extrusion/Description: Qty in Ft: Custom: Extrusion/Description: Qty in Ft: Reinforcing Steel: Description/Location: Finish: Slab Cover: Top: Extrusion/Description: Qty in Ft: Middle: Extrusion/Description: Qty in Ft: Bottom: Extrusion/Description: Qty in Ft: Custom: Extrusion/Description: Qty in Ft: Receptor: Extrusions/Descriptions: Qty in Ft: Head: Jamb: Splice Qty: Exact Size: Extrusion/Description: Qty in Ft: Sill Starter/Subsill: Splice Qty: Exact Size: Custom: Extrusion/Description: Qty in Ft: Trim: Head: Extrusion/Description: Qty in Ft: Jamb: Extrusion/Description: Qty in Ft: Sill: Extrusion/Description: Qty in Ft: Misc: Break Metal: Note: Attach separate drawing w/ shape, size & quantity Misc. Accessories: Extrusion/Description: Qty in Ft: Misc. Accessories: Extrusion/Description: Qty in Ft: Misc. Accessories: Extrusion/Description: Qty in Ft: Special Anchors: Anchor Holes in Accessories: New Extrusion Dies: New Configurations: New Tooling: Warranty: Window: Yrs. Finish: Yrs. Glass: Yrs. Other: Yrs.

Alternates:

Additional Information and/or comments by Engineering:

*Note: Please complete as much of the information as possible. The more information we have the easier it is to review and quote and the more successful the project will be. Items highlighted in yellow are required.

1551 Mount Rose Avenue, York, PA 17403-2929 105 Mahoning Avenue, New Castle, PA 16102 Page 5 of 5