Roll-Up Door Info

Roll-Up Door, Dimensions: 7' Width, 7' Height Fully Installed, $ 700.00

Price includes the following: ------Door Accessories: Factory Installed Insulation, 85.00 Header Draft Stop, 15.00 Jamb Brush Seals, 50.00 Hood, 150.00 Factory Installed Tensioner (with winding bar), 25.00

Lock Options: Standard SpaceGuard Exterior Latch, 0.00 SpaceGuard Cylinder Lock, 25.00 Additional SpaceGuard Latch, 15.00 ------

Jamb Brush Seal Designed to eliminate air infiltration. Recommended for Weather strip fabricated from black use in wide-open spaces, dusty polypropylene filament brush in a mill weather conditions, and with the finish aluminum extrusion. Attaches to insulation accessory. side jamb. $ 50.00

Header Draft Stop (Field Installed) Designed to seal the top of the door to eliminate air infiltration. Recommended for use in wide- ® 4" wide, consists of a 1" rigid PVC open spaces, dusty weather strip and 3" flexible TPE section. conditions, and with the Attaches to the header. insulation accessory.

$ 15.00

SpaceGuard Exterior Cast zinc alloy with black nickel finish. Latch slide has magnetic Provides secure exterior locking Latch properties for use with security system capabilities to a single entrance. switches. Designed to accommodate two padlocks up to 7/16" shank. Standard Accommodates Trac-Rite's optional SpaceGuard Cylinder Lock, which features an easy over-lock system. The Additional cylinder lock does not penetrate the $ 15.00 door. Interior Lock

12-gauge, zinc-coated steel slide bolt Recommended where interior engages a lock strike attached to the access is needed, for example, side guide. Two locks per door fasten counter shutter applications. to the bottom assembly and are suitable for padlocking. $ 20.00

SpaceGuard Cylinder Lock Removable security cylinder features Provides added security, easy over-lock capability and especially for unfenced areas.\ protection from bolt cutters. Each cylinder lock comes with three coded keys. $ 25.00

Keeps the door nest clean, protects the mechanisms from weather, and is aesthetically Covers the door nest. Available in Iced pleasing. Hood White only. $ 150.00

Insulation

(Factory Installed) Helps maintain desired temperature in heated building Double bubble foil reflective applications. Header draft stop insulation with an extra layer of and jamb brush seals are polyurethane coating on the front side recommended with insulated for durability. doors. $ 85.00 Tensioner

Adjusts the tension of the door spring after installation and Factory installed zinc-coated cast steel allows for readjustment as the tension wheel. For doors 12'8" H and spring relaxes from time and smaller. usage

. $ 25.00

Use when exterior mounting is necessary due to lack of available head room for interior mounting. A hood may be Reverse Rolled Curtain Finished material faces exterior. necessary with this option. $ 25.00

9-1/2" outside diameter cast iron Pulley system offers easy and pocket wheel with zinc-plated steel convenient opening. Direct-Drive Chain Hoist chain guide. Mounts on a 1" diameter shaft extension fastened to the door $ 75.00 axle. Mounts on either side of the door. Chain keeper provided. 4:1 Reduced-Drive Chain Hoist When opening large, heavy doors, this chain hoist fits the Uses a chain and a two-sprocket bill. With one pull, the door arrangement to make the door much opens 1/4 of a revolution. This easier to lift. Mounts on a 1" diameter allows for controlled easy shaft extension fastened to the door opening. Additionally, this hoist axle. Mounts on either side of the door. allows tall doors to open Chain keeper provided. completely with little effort. $ 95.00

Shaft Extension Kit Necessary to install chain hoists or motor operators. The 5' shaft Shaft extensions are designed to fit the extension is ideal for car axle. Measures 1" in diameter with a washes. 1/4" keyway. $ 25.00