Of Work to Be Done and Materials to Be Used in Carrying s1

SPECIFICATION

of work to be done and materials to be used in carrying out the works shown on the accompanying drawings

~ (project name)

~ (project address)

~ (owners name)

Job Number: ~

Date: ~

6711D DULUX PAINTING EXTERIOR

1. GENERAL

This section relates to the surface preparation and painting of new and existing exterior substrates using Dulux exterior paint systems. www.duspec.co.nz

1.1 RELATED WORK Refer to 6700D DULUX PAINTING GENERAL for general matters related to painting work.

2. PRODUCTS

2.1 PRODUCTS Refer to 6700D DULUX PAINTING GENERAL for product clauses.

3. EXECUTION

3.1 EXECUTION Refer to 6700D DULUX PAINTING GENERAL for execution clauses.

4. SELECTIONS For further details on selections go to www.dulux.co.nz/specifier. Substitutions are not permitted to the following, unless stated otherwise.

Referto DULUX DuSpec for up to date VOC levels as these are subject to change.

Masonry and cementitious substrates - new walls

4.1 EXTERIOR TILT-UP, PRECAST AND OFF THE FORM CONCRETE NEW - WALLS - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09195 Preparation: DULUX AcraTex 400/4 Tiltwash @ 7 m²/L 1st coat: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L 3rd coat: DULUX Weathershield X10 @ 16 m²/L

4.2 EXTERIOR TILT-UP, PRECAST & OFF THE FORM CONCRETE NEW - HIGH BUILD 170 MICRON DFT Gloss level: Matt Coating type: Water based high build System: DuSpec NZ_SA09160 Preparation: DULUX AcraTex 400/4 Tiltwash @ 7 m²/L 1st coat: DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L 2nd coat: DULUX AcraTex AcraShield Advance @ 6 m²/L 3rd coat: DULUX AcraTex AcraShield Advance @ 6 m²/L

4.3 EXTERIOR TILT-UP, PRECAST & OFF THE FORM CONCRETE NEW - HIGH BUILD 270 MICRON DFT Gloss level: Matt Coating type: Water based high build System: DuSpec NZ_SA09137 Preparation: DULUX AcraTex 400/4 Tiltwash @ 7 m²/L 1st coat: DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L 2nd coat: DULUX Elastomeric 201 @ 4 m²/L 3rd coat: DULUX Elastomeric 201 @ 4 m²/L 4.4 EXTERIOR TILT-UP, PRECAST & OFF THE FORM CONCRETE NEW - WALLS - WATER REPELLENT SYSTEM Gloss level: Matt Coating type: Water based masonry sealer System: Performance Solutions (supplied by Dulux) Preparation: DULUX AcraTex 400/4 Tiltwash @ 7 m²/L 1st coat: MicroSeal

4.5 EXTERIOR TILT-UP, PRECAST AND OFF THE FORM CONCRETE NEW - WALLS - CLEAR Gloss level: Matt Coating type: Single pack solvent based moisture cured clear polyurethane System: DuSpec NZ_SD09353 Preparation: DULUX AcraTex 400/4 Tiltwash @ 7 m²/L 1st coat: MAXIPROOF (Gloss) @ 8 m²/L 2nd coat: MAXIPROOF (Gloss) @ 8 m²/L 3rd coat: MAXIPROOF (Matt) @ 8 m²/L

4.6 EXTERIOR MASONRY NEW - WALLS - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09194 1st coat: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L 3rd coat: DULUX Weathershield X10 @ 16 m²/L

4.7 EXTERIOR MASONRY NEW - WALLS - HIGH BUILD 170 MICRON DFT Gloss level: Matt Coating type: Water based high build System: DuSpec NZ_SA09151 1st coat: DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L 2nd coat: DULUX AcraTex AcraShield Advance @ 6 m²/L 3rd coat: DULUX AcraTex AcraShield Advance @ 6 m²/L

4.8 EXTERIOR MASONRY NEW - WALLS - HIGH BUILD 270 MICRON DFT Gloss level: Matt Coating type: Water based high build System: DuSpec NZ_SA09136 1st coat: DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L 2nd coat: DULUX Elastomeric 201 @ 4 m²/L 3rd coat: DULUX Elastomeric 201 @ 4 m²/L

4.9 EXTERIOR MASONRY NEW -- WALLS - WATER REPELLENT SYSTEM Gloss level: Matt Coating type: Water based masonry sealer System: Performance Solutions (supplied by Dulux) Preparation: DULUX AcraTex 400/4 Tiltwash @ 7 m²/L 1st coat: MicroSeal

4.10 EXTERIOR MASONRY NEW -- WALLS - CLEAR Gloss level: Matt Coating type: Single pack solvent based moisture cured clear polyurethane System: DuSpec NZ_SD09179 1st coat: MAXIPROOF Gloss) @ 8 m²/L 2nd coat: MAXIPROOF (Gloss) @ 8 m²/L 3rd coat: MAXIPROOF (Matt) @ 8 m²/L

Masonry and cementitious substrates - new areas, foot traffic

4.11 EXTERIOR CONCRETE NEW - FOOT TRAFFIC - PAINT Gloss level: Satin Coating type: Water based System: DuSpec NZ_SD09184 1st coat: DULUX AquaTread Undercoat @ 11.5 m²/L 2nd coat: DULUX AquaTread @ 11.5 m²/L 3rd coat: DULUX AquaTread @ 11.5 m²/L

4.12 EXTERIOR CONCRETE NEW - FOOT TRAFFIC - WATER BASED CLEAR Gloss level: Satin Coating type: Water based clear System: DuSpec NZ_SD09174 1st coat: DULUX AquaTread Clear Sealer @ 11.2 m²/L 2nd coat: DULUX AquaTread Clear Sealer @ 11.2 m²/L

4.13 EXTERIOR CONCRETE NEW - FOOT TRAFFIC - SOLVENT BASED CLEAR Gloss level: Matt Coating type: Single pack solvent based moisture cured clear polyurethane System: DuSpec NZ_SD09180 1st coat: MAXIPROOF (Gloss) @ 8 m²/L 2nd coat: MAXIPROOF (Gloss) @ 8 m²/L 3rd coat: MAXIPROOF (Matt) @ 8 m²/L

Masonry and cementitious substrates - new areas, vehicle traffic

4.14 EXTERIOR CONCRETE NEW - VEHICLE TRAFFIC - SOLVENT BASED CLEAR Gloss level: Gloss Coating type: Two pack solvent based epoxy + two pack solvent based acrylic polyurethane System: DuSpec NZ_SC09186 1st coat: DULUX Durebild STE @ 125 microns DFT 2nd coat: DULUX Durebild STE @ 125 microns DFT 3rd coat: DULUX Weathermax HBR @ 100 microns DFT

Fibre cement sheet substrates - new cladding

4.15 EXTERIOR FIBRE CEMENT SHEET NEW - CLADDING - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09169 1st coat: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L 3rd coat: DULUX Weathershield X10 @ 16 m²/L

4.16 EXTERIOR FIBRE CEMENT SHEET NEW - CLADDING - HIGH BUILD Gloss level: Matt Coating type: Water based high build System: DuSpec NZ_SA09150 1st coat: DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L 2nd coat: DULUX AcraTex AcraShield Advance @ 6 m²/L 3rd coat: DULUX AcraTex AcraShield Advance @ 6 m²/L

4.17 EXTERIOR FIBRE CEMENT SHEET NEW - CLADDING - CLEAR Gloss level: Matt Coating type: Single pack solvent based moisture cured clear polyurethane System: DuSpec NZ_SW09164 1st coat: MAXIPROOF (Gloss) @ 8 m²/L 2nd coat: MAXIPROOF (Gloss) @ 8 m²/L 3rd coat: MAXIPROOF (Matt) @ 8 m²/L

Timber substrates - new cladding

4.18 EXTERIOR TIMBER NEW - CLADDING - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09216 1st coat: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L 3rd coat: DULUX Weathershield X10 @ 16 m²/L

4.19 EXTERIOR CEDAR NEW - CLADDING - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09215 1st coat: DULUX 1 Step Oil Based Primer Sealer & Undercoat @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L 3rd coat: DULUX Weathershield X10 @ 16 m²/L

4.20 EXTERIOR TIMBER NEW - CLADDING - WATER BASED STAIN Gloss level: Matt Coating type: Water based stain System: DuSpec NZ_SW09224 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: INTERGRAIN NaturalStain @ 9 m²/L 2nd coat: INTERGRAIN NaturalStain @ 9 m²/L 3rd coat: INTERGRAIN NaturalStain @ 9 m²/L (optional)

4.21 EXTERIOR TIMBER NEW - CLADDING - SOLVENT BASED STAIN Gloss level: Matt Coating type: Solvent based oil System: DuSpec NZ_SW09226 Preparation: CABOT'S Deck Clean @ 12-16 m²/L 1st coat: CABOT'S Deck & Exterior Stain Oil Based 2nd coat: CABOT'S Deck & Exterior Stain Oil Based 3rd coat: CABOT'S Deck & Exterior Stain Oil Based (optional)

Timber substrates - new trim, doors, frames, etc

4.22 EXTERIOR TIMBER NEW - TRIM, DOORS AND FRAMES - WATER BASED ENAMEL Gloss level: Semi Gloss Coating type: Water based enamel System: DuSpec NZ_SD09147 1st coat:: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 2nd coat: DULUX Aquanamel @ 16 m²/L 3rd coat: DULUX Aquanamel @ 16 m²/L

4.23 EXTERIOR TIMBER NEW - TRIM, DOORS AND FRAMES - SOLVENT BASED ENAMEL Gloss level: Semi Gloss Coating type: Solvent based enamel System: DuSpec NZ_SD09240 1st coat:: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 2nd coat: DULUX Super Enamel @ 16.1 m²/L 3rd coat: DULUX Super Enamel @ 16.1 m²/L

4.24 EXTERIOR TIMBER NEW - TRIM, DOORS AND FRAMES - SOLVENT BASED CLEAR Gloss level: Matt Coating type: Single pack solvent based moisture cured clear polyurethane System: DuSpec NZ_SW09232 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: MAXIPROOF (Gloss) @ 8 m²/L 2nd coat: MAXIPROOF (Gloss) @ 8 m²/L 3rd coat: MAXIPROOF (Matt) @ 8 m²/L

4.25 EXTERIOR TIMBER NEW - TRIM, DOORS AND FRAMES - WATER BASED STAIN Gloss level: Matt Coating type: Water based stain System: DuSpec NZ_SW09224 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: INTERGRAIN NaturalStain @ 9 m²/L 2nd coat: INTERGRAIN NaturalStain @ 9 m²/L 3rd coat: INTERGRAIN NaturalStain @ 9 m²/L (optional)

4.26 EXTERIOR TIMBER NEW - TRIM, DOORS AND FRAMES - SOLVENT BASED STAIN Gloss level: Matt Coating type: Water based stain System: DuSpec NZ_SW09226 Preparation: CABOT'S Deck Clean @ 12-16 m²/L 1st coat: CABOT'S Deck & Exterior Stain Oil Based 2nd coat: CABOT'S Deck & Exterior Stain Oil Based 3rd coat: CABOT'S Deck & Exterior Stain Oil Based (optional)

Timber substrates - new fences, pergolas, etc

4.27 EXTERIOR TIMBER NEW - FENCES AND PERGOLAS - PAINT Gloss level: Low Sheen Coating type: Water based System: DuSpec NZ_SD09236 Preparation: CABOT'S Deck Clean @ 12-16 m²/L 1st coat: DULUX Timbacryl @ 16.4 m²/L 2nd coat: DULUX Timbacryl @ 16.4 m²/L 3rd coat: DULUX Timbacryl @ 16.4 m²/L

4.28 EXTERIOR TIMBER NEW - FENCES AND PERGOLAS - WATER BASED STAIN Gloss level: Matt Coating type: Water based stain System: DuSpec NZ_SW09224 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: INTERGRAIN NaturalStain @ 9 m²/L 2nd coat: INTERGRAIN NaturalStain @ 9 m²/L 3rd coat: INTERGRAIN NaturalStain @ 9 m²/L (optional)

4.29 EXTERIOR TIMBER NEW - FENCES AND PERGOLAS - SOLVENT BASED STAIN Gloss level: Matt Coating type: Solvent based stain System: DuSpec NZ_SW09226 Preparation: CABOT'S Deck Clean @ 12-16 m²/L 1st coat: CABOT'S Deck & Exterior Stain Oil Based @ 10 m²/L 2nd coat: CABOT'S Deck & Exterior Stain Oil Based @ 10 m²/L 3rd coat: CABOT'S Deck & Exterior Stain Oil Based @ 10 m²/L (optional)

Timber substrates - new decks

4.30 EXTERIOR TIMBER NEW - DECKS - PAINT Gloss level: Low Sheen Coating type: Water based System: DuSpec NZ_SD09236 1st coat: DULUX Timbacryl @ 16.4 m²/L 2nd coat: DULUX Timbacryl @ 16.4 m²/L 3rd coat: DULUX Timbacryl @ 16.4 m²/L

4.31 EXTERIOR TIMBER NEW - DECKS - SOLVENT BASED CLEAR Gloss level: Matt Coating type: Single pack solvent based moisture cured clear polyurethane System: DuSpec NZ_SW09232 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: MAXIPROOF (Gloss) @ 8 m²/L 2nd coat: MAXIPROOF (Gloss) @ 8 m²/L 3rd coat: MAXIPROOF (Matt) @ 8 m²/L

4.32 EXTERIOR TIMBER NEW - DECKS - NATURAL OIL Gloss level: Matt Coating type: Solvent based oil System: DuSpec NZ_SW09234 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: INTERGRAIN Nature's Timber Oil @ 8.3 m²/L 2nd coat: INTERGRAIN Nature's Timber Oil @ 8.3 m²/L

4.33 EXTERIOR TIMBER NEW - DECKS - WATER BASED OIL Gloss level: Matt Coating type: Water based oil System: DuSpec NZ_SW09228 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: INTERGRAIN UltraDeck @ 12 m²/L 2nd coat: INTERGRAIN UltraDeck @ 12 m²/L 3rd coat: INTERGRAIN UltraDeck @ 12 m²/L (optional)

4.34 EXTERIOR TIMBER NEW - DECKS - WATER BASED STAIN Gloss level: Matt Coating type: Water based stain System: DuSpec NZ_SW09224 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: INTERGRAIN NaturalStain @ 9 m²/L 2nd coat: INTERGRAIN NaturalStain @ 9 m²/L 3rd coat: INTERGRAIN NaturalStain @ 9 m²/L (optional)

4.35 EXTERIOR TIMBER NEW - DECKS - SOLVENT BASED STAIN Gloss level: Matt Coating type: Solvent based stain System: DuSpec NZ_SW09226 Preparation: CABOT'S Deck Clean @ 12-16 m²/L 1st coat: CABOT'S Deck & Exterior Stain Oil Based @ 10 m²/L 2nd coat: CABOT'S Deck & Exterior Stain Oil Based @ 10 m²/L 3rd coat: CABOT'S Deck & Exterior Stain Oil Based @ 10 m²/L (optional)

Plastic substrates - new

4.36 EXTERIOR PLASTIC NEW - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09205 1st coat: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L 3rd coat: DULUX Weathershield X10 @ 16 m²/L

Metal substrates - new

4.37 EXTERIOR METAL ROOF NEW - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09279 1st coat: DULUX Roof & Trim @ 16 m²/L 2nd coat: DULUX Roof & Trim @ 16 m²/L 3rd coat: DULUX Roof & Trim @ 16 m²/L

4.38 EXTERIOR MILD STEEL NEW - DECORATIVE PAINT Gloss level: Semi Gloss Coating type: Water based zinc primer + water based topcoat System: DuSpec NZ_SD09257 1st coat: DULUX Quit Rust All Metal Primer @ 14.8 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L 3rd coat: DULUX Weathershield X10 @ 16 m²/L

4.39 EXTERIOR MILD STEEL NEW - LIGHT INDUSTRIAL COATING Gloss level: Gloss Coating type: Solvent based zinc phosphate primer + solvent based enamel System: DuSpec NZ_SC09296 1st coat: DULUX Metalshield All Surface Primer @ 15 m²/L 2nd coat: DULUX Metalshield FD Enamel @ 8.5 m²/L 3rd coat: DULUX Metalshield FD Enamel @ 8.5 m²/L

4.40 EXTERIOR MILD STEEL NEW - PROTECTIVE COATING Gloss level: Gloss Coating type: Two pack solvent based zinc phosphate epoxy primer+ two pack solvent based acrylic polyurethane System: DuSpec NZ_SC09306 1st coat DULUX Duremax GPE ZP @ 150 microns DFT 2nd coat: DULUX Weathermax HBR @ 100 microns DFT

4.41 EXTERIOR MILD STEEL NEW - PROTECTIVE COATING - METALLIC FINISH Gloss level: Gloss Coating type: Two pack solvent based zinc phosphate epoxy primer+ two pack solvent based metallic polyurethane + two pack solvent based acrylic clear polyurethane System: DuSpec NZ_SC09312 1st coat: DULUX Duremax GPE ZP @ 150 microns DFT 2nd coat: DULUX Quantum FX @ 55 microns DFT 3rd coat: DULUX Quantum Clearcoat @ 45 microns DFT

4.42 EXTERIOR GALVANIZED NEW - WATER BASED DECORATIVE PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09258 1st coat: DULUX Quit Rust All Metal Primer @ 14.8 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L 3rd coat: DULUX Weathershield X10 @ 16 m²/L

4.43 EXTERIOR GALVANIZED NEW - LIGHT INDUSTRIAL COATING Gloss level: Gloss Coating type: Solvent based zinc phosphate primer + solvent based enamel System: DuSpec NZ_SC09297 1st coat: DULUX Metalshield All Surface Primer @ 15 m²/L 2nd coat: DULUX Metalshield FD Enamel @ 8.5 m²/L 3rd coat: DULUX Metalshield FD Enamel @ 8.5 m²/L

4.44 EXTERIOR GALVANIZED NEW - PROTECTIVE COATING Gloss level: Gloss Coating type: Two pack solvent based zinc phosphate epoxy primer + two pack solvent based acrylic polyurethane System: DuSpec NZ_SC09305 1st coat: DULUX Duremax GPE ZP @ 150 microns DFT 2nd coat: DULUX Weathermax HBR @ 100 microns DFT

4.45 EXTERIOR GALVANIZED NEW - PROTECTIVE COATING - METALLIC FINISH Gloss level: Gloss Coating type: Two pack solvent based zinc phoshate epoxy primer+ two pack solvent based metallic polyurethane + two pack solvent based acrylic clear polyurethane System: DuSpec NZ_SC09313 1st coat: DULUX Duremax GPE ZP @ 150 microns DFT 2nd coat: DULUX Quantum FX @ 55 microns DFT 3rd coat: DULUX Quantum Clearcoat @ 45 microns DFT

4.46 EXTERIOR NON FERROUS METAL NEW - WALLS - DECORATIVE PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09256 1st coat: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L 3rd coat:: DULUX Weathershield X10 @ 16 m²/L

4.47 EXTERIOR NON FERROUS METAL NEW - DOORS, TRIMS AND FRAMES - DECORATIVE PAINT Gloss level: Semi Gloss Coating type: Water based enamel System: DuSpec NZ_SD09148 1st coat: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 2nd coat: DULUX Aquanamel @ 16m²/L 3rd coat: DULUX Aquanamel @ 16 m²/L

4.48 EXTERIOR NON FERROUS NEW - LIGHT INDUSTRIAL COATING Gloss level: Gloss Coating type: Solvent based zinc phosphate primer + solvent based enamel System: DuSpec NZ_SC09301 1st coat: DULUX Metalshield RFU Etch Primer @ 8 m²/L 2nd coat: DULUX Metalshield FD Enamel @ 8.5 m²/L 3rd coat: DULUX Metalshield FD Enamel @ 8.5 m²/L

4.49 EXTERIOR NON FERROUS METAL NEW - PROTECTIVE COATING Gloss level: Gloss Coating type: Two pack solvent based acrylic polyurethane System: DuSpec NZ_SC09307 1st coat: DULUX Durebild STE @ 125 microns DFT 2nd coat: DULUX Weathermax HBR @ 100 microns DFT

4.50 EXTERIOR NON FERROUS METAL NEW - PROTECTIVE COATING - METALLIC FINISH Gloss level: Gloss Coating type: Two pack solvent based epoxy + two pack solvent based metallic polyurethane + two pack solvent based acrylic clear polyurethane System: DuSpec NZ_SC09311 1st coat: DULUX Durebild STE @ 125 microns DFT 2nd coat: DULUX Quantum FX @ 55 microns DFT 3rd coat: DULUX Quantum Clearcoat @ 45 microns DFT

Anti graffiti - non sacrificial

4.51 ANTI GRAFFITI OVER BARE SUBSTRATE (EXCL TILT UP) - 2 PACK CLEAR GLOSS Gloss level: Gloss Coating type: Two pack solvent based acrylic clear polyurethane System: DuSpec NZ_SC09132 Preparation: DULUX Prep Wash @ 6 m²/L 1st coat: DULUX Quantum Clearcoat @ 45 microns DFT 2nd coat: DULUX Quantum Clearcoat @ 45 microns DFT 3rd coat: DULUX Quantum Clearcoat @ 45 microns DFT

4.52 ANTI GRAFFITI OVER BARE SUBSTRATE (EXCL TILT UP) -SINGLE PACK CLEAR SATIN Gloss level: Satin Coating type: Antigraffiti coating System: Performance Solutions (supplied by Dulux) Preparation: DULUX Prep Wash @ 6 m²/L 1st coat: MicroSeal 2nd coat: VandlGuard 3rd coat: VandlGuard 4th coat: VandlGuard (optional)

4.53 ANTI GRAFFITI OVER TILT UP, PRECAST AND OFF THE FORM CONCRETE - 2 PACK CLEAR GLOSS Gloss level: Gloss Coating type: Two pack solvent based acrylic clear polyurethane System: DuSpec NZ_SC09133 Preparation: DULUX AcraTex 400/4 Tiltwash @ 7 m²/L 1st coat: DULUX Quantum Clearcoat @ 45 microns DFT 2nd coat: DULUX Quantum Clearcoat @ 45 microns DFT 3rd coat: DULUX Quantum Clearcoat @ 45 microns DFT

4.54 ANTI GRAFFITI OVER TILT UP, PRECAST AND OFF THE FORM CONCRETE -SINGLE PACK CLEAR SATIN Gloss level: Satin Coating type: Antigraffiti coating System: Performance Solutions (supplied by Dulux) Preparation: DULUX AcraTex 400/4 Tiltwash @ 7 m²/L 1st coat: MicroSeal 2nd coat: VandlGuard 3rd coat: VandlGuard 4th coat: VandlGuard (optional)

4.55 ANTI GRAFFITI OVER NEWLY PAINTED - 2 PACK CLEAR GLOSS Gloss level: Gloss Coating type: Two pack solvent based acrylic clear polyurethane System: DuSpec NZ_SC09131 1st coat: DULUX Quantum Clearcoat @ 45 microns DFT

4.56 ANTI GRAFFITI OVER NEWLY PAINTED - SINGLE PACK CLEAR SATIN Gloss level: Satin Coating type: Antigraffiti coating System: Performance Solutions (supplied by Dulux) 1st coat: VandlGuard 2nd coat: VandlGuard 3rd coat: VandlGuard (optional)

4.57 ANTI GRAFFITI OVER EXISTING COATING - PIGMENTED GLOSS Gloss level: Gloss Coating type: Two pack solvent based epoxy + two pack solvent based acrylic polyurethane System: DuSpec NZ_SC09134 Preparation: DULUX Prep Wash @ 6 m²/L 1st coat: DULUX Durebild STE @ 125 microns DFT 2nd coat: DULUX Weathermax HBR @ 100 microns DFT

Masonry and cementitious substrates - existing walls

4.58 EXTERIOR TILT-UP, PRECAST AND OFF THE FORM CONCRETE EXISTING - WALLS - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09193 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 1st coat: DULUX Weathershield X10 @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L

4.59 EXTERIOR TILT-UP, PRECAST & OFF FORM CONCRETE EXISTING - HIGH BUILD 170 MICRON DFT Gloss level: Matt Coating type: Water based high build System: DuSpec NZ_SA09159 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L 1st coat: DULUX AcraTex AcraShield Advance @ 6 m²/L 2nd coat: DULUX AcraTex AcraShield Advance @ 6 m²/L

4.60 EXTERIOR TILT-UP, PRECAST & OFF FORM CONCRETE EXISTING - HIGH BUILD 270 MICRON DFT Gloss level: Matt Coating type: Water based high build System: DuSpec NZ_SA09139 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L 1st coat: DULUX Elastomeric 201 @ 4 m²/L 2nd coat: DULUX Elastomeric 201 @ 4 m²/L

4.61 EXTERIOR TILT-UP, PRECAST AND OFF THE FORM CONCRETE EXISTING - WALLS - CLEAR Gloss level: Matt Coating type: Single pack solvent based moisture cured clear polyurethane System: DuSpec NZ_SD09350 Preparation: DULUX Prep Wash @ 6 m²/L 1st coat: MAXIPROOF (Gloss) @ 8 m²/L 2nd coat: MAXIPROOF (Gloss) @ 8 m²/L 3rd coat: MAXIPROOF (Matt) @ 8 m²/L

4.62 EXTERIOR MASONRY EXISTING - WALLS - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09192 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 1st coat: DULUX Weathershield X10 @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L

4.63 EXTERIOR MASONRY EXISTING - WALLS - HIGH BUILD 170 MICRON DFT Gloss level: Matt Coating type: Water based high build System: DuSpec NZ_SA09158 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L 1st coat: DULUX AcraTex AcraShield Advance @ 6 m²/L 2nd coat: DULUX AcraTex AcraShield Advance @ 6 m²/L

4.64 EXTERIOR MASONRY EXISTING - WALLS - HIGH BUILD 270 MICRON DFT Gloss level: Matt Coating type: Water based high build System: DuSpec NZ_SA09138 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L 1st coat: DULUX Elastomeric 201 @ 4 m²/L 2nd coat: DULUX Elastomeric 201 @ 4 m²/L

4.65 EXTERIOR MASONRY EXISTING - WALLS - CLEAR Gloss level: Matt Coating type: Single pack solvent based moisture cured clear polyurethane System: DuSpec NZ_SD09181 Preparation: DULUX Prep Wash @ 6 m²/L 1st coat: MAXIPROOF(Gloss) @ 8 m²/L 2nd coat: MAXIPROOF(Gloss) @ 8 m²/L 3rd coat: MAXIPROOF(Matt) @ 8 m²/L Masonry and cementitious substrates - existing areas, foot traffic

4.66 EXTERIOR CONCRETE EXISTING - FOOT TRAFFIC - PAINT Gloss level: Satin Coating type: Water based System: DuSpec NZ_SD09183 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX AquaTread Undercoat @ 11.5 m²/L 1st coat: DULUX AquaTread @ 11.5 m²/L 2nd coat: DULUX AquaTread @ 11.5 m²/L

4.67 EXTERIOR CONCRETE EXISTING - FOOT TRAFFIC - WATER BASED CLEAR Gloss level: Satin Coating type: Water based clear System: DuSpec NZ_SD09173 Preparation: DULUX Prep Wash @ 6 m²/L 1st coat: DULUX AquaTread Clear Sealer @ 11.2 m²/L 2nd coat: DULUX AquaTread Clear Sealer @ 11.2 m²/L

4.68 EXTERIOR CONCRETE EXISTING - FOOT TRAFFIC - SOLVENT BASED CLEAR Gloss level: Matt Coating type: Single pack solvent based moisture cured clear polyurethane System: DuSpec NZ_SD09182 Preparation: DULUX Prep Wash @ 6 m²/L 1st coat: MAXIPROOF (Gloss) @ 8 m²/L 2nd coat: MAXIPROOF (Gloss) @ 8 m²/L 3rd coat: MAXIPROOF (Matt) @ 8 m²/L

Masonry and cementitious substrates - existing areas, vehicle traffic

4.69 EXTERIOR CONCRETE EXISTING - VEHICLE TRAFFIC - SOLVENT BASED CLEAR Gloss level: Gloss Coating type: Two pack solvent based epoxy + two pack solvent based acrylic polyurethane System: DuSpec NZ_SC09185 Preparation: DULUX Prep Wash @ 6 m²/L 1st coat: DULUX Durebild STE @ 125 microns DFT 2nd coat: DULUX Durebild STE @ 125 microns DFT 3rd coat: DULUX Weathermax HBR @ 100 microns DFT

Fibre cement sheet substrates - existing cladding

4.70 EXTERIOR FIBRE CEMENT SHEET EXISTING - CLADDING - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09168 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 1st coat: DULUX Weathershield X10 @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L

4.71 EXTERIOR FIBRE CEMENT SHEET EXISTING - CLADDING - HIGH BUILD Gloss level: Matt Coating type: Water based high build System: DuSpec NZ_SA09157 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L 1st coat: DULUX AcraTex AcraShield Advance @ 6 m²/L 2nd coat: DULUX AcraTex AcraShield Advance @ 6 m²/L 4.72 EXTERIOR FIBRE CEMENT SHEET EXISTING - CLADDING - CLEAR Gloss level: Matt Coating type: Single pack solvent based moisture cured clear polyurethane System: DuSpec NZ_SW09165 Preparation: DULUX Prep Wash @ 6 m²/L 1st coat: MAXIPROOF (Gloss) @ 8 m²/L 2nd coat: MAXIPROOF (Gloss) @ 8 m²/L 3rd coat: MAXIPROOF (Matt) @ 8 m²/L

Timber substrates - existing cladding

4.73 EXTERIOR TIMBER EXISTING - CLADDING - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09213 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 1st coat: DULUX Weathershield X10 @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L

4.74 EXTERIOR CEDAR EXISTING - CLADDING - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09214 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX 1 Step Oil Based Primer Sealer & Undercoat @ 16 m²/L 1st coat: DULUX Weathershield X10 @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L

4.75 EXTERIOR TIMBER EXISTING - CLADDING - WATER BASED STAIN Gloss level: Matt Coating type: Water based stain System: DuSpec NZ_SW09223 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: INTERGRAIN NaturalStain @ 9 m²/L 2nd coat: INTERGRAIN NaturalStain @ 9 m²/L 3rd coat: INTERGRAIN NaturalStain @ 9 m²/L (optional)

4.76 EXTERIOR TIMBER EXISTING - CLADDING - SOLVENT BASED STAIN Gloss level: Matt Coating type: Solvent based oil System: DuSpec NZ_SW09225 Preparation: CABOT'S Deck Clean @ 12-16 m²/L 1st coat: CABOT'S Deck & Exterior Stain Oil Based 2nd coat: CABOT'S Deck & Exterior Stain Oil Based 3rd coat: CABOT'S Deck & Exterior Stain Oil Based (optional)

Timber substrates - existing trims, doors, frames, etc

4.77 EXTERIOR TIMBER EXISTING - TRIM, DOORS AND FRAMES - WATER BASED ENAMEL Gloss level: Semi Gloss Coating type: Water based enamel System: DuSpec NZ_SD09146 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 1st coat: DULUX Aquanamel @ 16 m²/L 2nd coat: DULUX Aquanamel @ 16 m²/L

4.78 EXTERIOR TIMBER EXISTING - TRIM, DOORS AND FRAMES - SOLVENT BASED ENAMEL Gloss level: Semi Gloss Coating type: Solvent based enamel System: DuSpec NZ_SD09239 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 1st coat: DULUX Super Enamel @ 16.1 m²/L 2nd coat: DULUX Super Enamel @ 16.1 m²/L

4.79 EXTERIOR TIMBER EXISTING - TRIM, DOORS AND FRAMES - SOLVENT BASED CLEAR Gloss level: Matt Coating type: Single pack solvent based moisture cured clear polyurethane System: DuSpec NZ_SW0921 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: MAXIPROOF (Gloss) @ 8 m²/L 2nd coat: MAXIPROOF (Gloss) @ 8 m²/L 3rd coat: MAXIPROOF (Matt) @ 8 m²/L

4.80 EXTERIOR TIMBER EXISTING - TRIM, DOORS AND FRAMES - WATER BASED STAIN Gloss level: Matt Coating type: Water based stain System: DuSpec NZ_SW09223 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: INTERGRAIN NaturalStain @ 9 m²/L 2nd coat: INTERGRAIN NaturalStain @ 9 m²/L 3rd coat: INTERGRAIN NaturalStain @ 9 m²/L (optional)

4.81 EXTERIOR TIMBER EXISTING - TRIM, DOORS AND FRAMES - SOLVENT BASED STAIN Gloss level: Matt Coating type: Solvent based oil System: DuSpec NZ_SW09225 Preparation: CABOT'S Deck Clean @ 12-16 m²/L 1st coat: CABOT'S Deck & Exterior Stain Oil Based 2nd coat: CABOT'S Deck & Exterior Stain Oil Based 3rd coat: CABOT'S Deck & Exterior Stain Oil Based (optional

Timber substrates - existing fences, pergolas, etc

4.82 EXTERIOR TIMBER EXISTING - FENCES AND PERGOLAS - PAINT Gloss level: Low Sheen Coating type: Water based System: DuSpec NZ_SD09235 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Timbacryl @ 16.4 m²/L 1st coat: DULUX Timbacryl @ 16.4 m²/L 2nd coat: DULUX Timbacryl @ 16.4 m²/L

4.83 EXTERIOR TIMBER EXISTING - FENCES AND PERGOLAS - WATER BASED STAIN Gloss level: Matt Coating type: Water based stain System: DuSpec NZ_SW09223 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: INTERGRAIN NaturalStain @ 9 m²/L 2nd coat: INTERGRAIN NaturalStain @ 9 m²/L 3rd coat: INTERGRAIN NaturalStain @ 9 m²/L (optional)

4.84 EXTERIOR TIMBER EXISTING - FENCES AND PERGOLAS - SOLVENT BASED STAIN Gloss level: Matt Coating type: Solvent based oil System: DuSpec NZ_SW09225 Preparation: CABOT'S Deck Clean @ 12-16 m²/L 1st coat: CABOT'S Deck & Exterior Stain Oil Based @ 10 m²/L 2nd coat: CABOT'S Deck & Exterior Stain Oil Based @ 10 m²/L 3rd coat: CABOT'S Deck & Exterior Stain Oil Based @ 10 m²/L (optional) Timber substrates - existing decks

4.85 EXTERIOR TIMBER EXISTING - DECKS - PAINT Gloss level: Low Sheen Coating type: Water based System: DuSpec NZ_SD09235 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Timbacryl @ 16.4 m²/L 1st coat: DULUX Timbacryl @ 16.4 m²/L 2nd coat: DULUX Timbacryl @ 16.4 m²/L

4.86 EXTERIOR TIMBER EXISTING - DECKS - SOLVENT BASED CLEAR Gloss level: Matt Coating type: Single pack solvent based moisture cured clear polyurethane System: DuSpec NZ_SW09231 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: MAXIPROOF (Gloss) @ 8 m²/L 2nd coat: MAXIPROOF (Gloss) @ 8 m²/L 3rd coat: MAXIPROOF (Matt) @ 8 m²/L

4.87 EXTERIOR TIMBER EXISTING - DECKS - NATURAL OIL Gloss level: Matt Coating type: Solvent based oil System: DuSpec NZ_SW09233 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: NTERGRAIN Nature's Timber Oil @ 8.3 m²/L 2nd coat: NTERGRAIN Nature's Timber Oil @ 8.3 m²/L

4.88 EXTERIOR TIMBER EXISTING - DECKS - WATER BASED OIL Gloss level: Matt Coating type: Water based stain System: DuSpec NZ_SW09227 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: INTERGRAIN UltraDeck @ 12 m²/L 2nd coat: INTERGRAIN UltraDeck @ 12 m²/L 3rd coat: INTERGRAIN UltraDeck @ 12 m²/L (optional)

4.89 EXTERIOR TIMBER EXISTING - DECKS - WATER BASED STAIN Gloss level: Matt Coating type: Water based stain System: DuSpec NZ_SW09223 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: INTERGRAIN NaturalStain @ 9 m²/L 2nd coat: INTERGRAIN NaturalStain @ 9 m²/L 3rd coat: INTERGRAIN NaturalStain @ 9 m²/L (optional)

4.90 EXTERIOR TIMBER EXISTING - DECKS - SOLVENT BASED STAIN Gloss level: Matt Coating type: Solvent based oil System: DuSpec NZ_SW09225 Preparation: CABOT'S Deck Clean @ 12-16 m²/L 1st coat: CABOT'S Deck & Exterior Stain Oil Based @ 10 m²/L 2nd coat: CABOT'S Deck & Exterior Stain Oil Based @ 10 m²/L 3rd coat: CABOT'S Deck & Exterior Stain Oil Based @ 10 m²/L (optional)

Plastic substrates - existing

4.91 EXTERIOR PLASTIC EXISTING - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09206 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 1st coat: DULUX Weathershield X10 @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L

Metal substrates - existing

4.92 EXTERIOR METAL ROOF EXISTING - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09281 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Quit Rust All Metal Primer @ 14.8 m²/L 1st coat: DULUX Roof & Trim @ 16 m²/L 2nd coat: DULUX Roof & Trim @ 16 m²/L

4.93 EXTERIOR MILD STEEL EXISTING - DECORATIVE PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09260 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Quit Rust All Metal Primer @ 14.8 m²/L 1st coat: DULUX Weathershield X10 @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L

4.94 EXTERIOR MILD STEEL EXISTING - LIGHT INDUSTRIAL COATING Gloss level: Gloss Coating type: Solvent based enamel System: DuSpec NZ_SC09295 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Metalshield All Surface Primer @ 15 m²/L 1st coat: DULUX Metalshield FD Enamel @ 8.5 m²/L 2nd coat: DULUX Metalshield FD Enamel @ 8.5 m²/L

4.95 EXTERIOR MILD STEEL EXISTING - PROTECTIVE COATING Gloss level: Gloss Coating type: Two pack solvent based epoxy + two pack solvent based acrylic polyurethane System: DuSpec NZ_SC09303 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Durebild STE @ 125 microns DFT 1st coat DULUX Durebild STE @ 125 microns DFT 2nd coat: DULUX Weathermax HBR @ 100 microns DFT

4.96 EXTERIOR MILD STEEL NEW - PROTECTIVE COATING - METALLIC FINISH Gloss level: Gloss Coating type: Two pack solvent based epoxy + two pack solvent based metallic polyurethane + two pack solvent based acrylic clear polyurethane System: DuSpec NZ_SC09308 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Durebild STE @ 125 microns DFT 1st coat: DULUX Durebild STE @ 125 microns DFT 2nd coat: DULUX Quantum FX @ 55 microns DFT 3rd coat: DULUX Quantum Clearcoat @ 45 microns DFT

4.97 EXTERIOR GALVANIZED EXISTING - DECORATIVE PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09259 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Quit Rust All Metal Primer @ 14.8 m²/L 1st coat: DULUX Weathershield X10 @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L

4.98 EXTERIOR GALVANIZED EXISTING - LIGHT INDUSTRIAL COATING Gloss level: Gloss Coating type: Solvent based zinc phosphate primer + solvent based enamel System: DuSpec NZ_SC09294 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Metalshield All Surface Primer @ 15 m²/L 1st coat: DULUX Metalshield FD Enamel @ 8.5 m²/L 2nd coat: DULUX Metalshield FD Enamel @ 8.5 m²/L

4.99 EXTERIOR GALVANIZED EXISTING - PROTECTIVE COATING Gloss level: Gloss Coating type: Two pack solvent based epoxy + two pack solvent based acrylic polyurethane System: DuSpec NZ_SC09302 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Durebild STE @ 125 microns DFT 1st coat: DULUX Durebild STE @ 125 microns DFT 2nd coat: DULUX Weathermax HBR @ 100 microns DFT

4.100 EXTERIOR GALVANIZED EXISTING - PROTECTIVE COATING - METALLIC FINISH Gloss level: Gloss Coating type: Two pack solvent based epoxy + two pack solvent based metallic polyurethane + two pack solvent based acrylic clear polyurethane System: DuSpec NZ_SC09310 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Durebild STE @ 125 microns DFT 1st coat: DULUX Durebild STE @ 125 microns DFT 2nd coat: DULUX Quantum FX @ 55 microns DFT 3rd coat: DULUX Quantum Clearcoat @ 45 microns DFT

4.101 EXTERIOR NON FERROUS METAL EXISTING - WALLS - DECORATIVE PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09255 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 1st coat: DULUX Weathershield X10 @ 16 m²/L 2nd coat:: DULUX Weathershield X10 @ 16 m²/L

4.102 EXTERIOR NON FERROUS METAL EXISTING - DOORS, TRIMS AND FRAMES - DECORATIVE PAINT Gloss level: Semi Gloss Coating type: Water based enamel System: DuSpec NZ_SD09145 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 1st coat: DULUX Aquanamel @ 16 m²/L 2nd coat:: DULUX Aquanamel @ 16 m²/L

4.103 EXTERIOR NON FERROUS EXISTING - LIGHT INDUSTRIAL COATING Gloss level: Gloss Coating type: Solvent based etch primer + solvent based enamel System: DuSpec NZ_SC09300 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Metalshield RFU Etch Primer @ 8 m²/L 1st coat: DULUX Metalshield FD Enamel @ 8.5 m²/L 2nd coat: DULUX Metalshield FD Enamel @ 8.5 m²/L 4.104 INTERIOR NON FERROUS METAL EXISTING - PROTECTIVE COATING Gloss level: Gloss Coating type: Two pack solvent based epoxy + two pack solvent based acrylic polyurethane System: DuSpec NZ_SC09304 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Durebild STE @ 125 microns DFT 1st coat: DULUX Durebild STE @ 125 microns DFT 2nd coat: DULUX Weathermax HBR @ 100 microns DFT

4.105 INTERIOR NON FERROUS METAL EXISTING - PROTECTIVE COATING - METALLIC FINISH Gloss level: Gloss Coating type: Two pack solvent based epoxy + two pack solvent based metallic polyurethane + two pack solvent based acrylic clear polyurethane System: DuSpec NZ_SC09309 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Durebild STE @ 125 microns DFT 1st coat: DULUX Durebild STE @ 125 microns DFT 2nd coat: DULUX Quantum FX @ 55 microns DFT 3rd coat: DULUX Quantum Clearcoat @ 45 microns DFT