<p> SPECIFICATION</p><p> of work to be done and materials to be used in carrying out the works shown on the accompanying drawings</p><p>~ (project name)</p><p>~ (project address)</p><p>~ (owners name)</p><p>Job Number: ~</p><p>Date: ~</p><p>6711D DULUX PAINTING EXTERIOR</p><p>1. GENERAL</p><p>This section relates to the surface preparation and painting of new and existing exterior substrates using Dulux exterior paint systems. www.duspec.co.nz</p><p>1.1 RELATED WORK Refer to 6700D DULUX PAINTING GENERAL for general matters related to painting work.</p><p>2. PRODUCTS</p><p>2.1 PRODUCTS Refer to 6700D DULUX PAINTING GENERAL for product clauses.</p><p>3. EXECUTION</p><p>3.1 EXECUTION Refer to 6700D DULUX PAINTING GENERAL for execution clauses.</p><p>4. SELECTIONS For further details on selections go to www.dulux.co.nz/specifier. Substitutions are not permitted to the following, unless stated otherwise.</p><p>Referto DULUX DuSpec for up to date VOC levels as these are subject to change.</p><p>Masonry and cementitious substrates - new walls</p><p>4.1 EXTERIOR TILT-UP, PRECAST AND OFF THE FORM CONCRETE NEW - WALLS - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09195 Preparation: DULUX AcraTex 400/4 Tiltwash @ 7 m²/L 1st coat: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L 3rd coat: DULUX Weathershield X10 @ 16 m²/L</p><p>4.2 EXTERIOR TILT-UP, PRECAST & OFF THE FORM CONCRETE NEW - HIGH BUILD 170 MICRON DFT Gloss level: Matt Coating type: Water based high build System: DuSpec NZ_SA09160 Preparation: DULUX AcraTex 400/4 Tiltwash @ 7 m²/L 1st coat: DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L 2nd coat: DULUX AcraTex AcraShield Advance @ 6 m²/L 3rd coat: DULUX AcraTex AcraShield Advance @ 6 m²/L</p><p>4.3 EXTERIOR TILT-UP, PRECAST & OFF THE FORM CONCRETE NEW - HIGH BUILD 270 MICRON DFT Gloss level: Matt Coating type: Water based high build System: DuSpec NZ_SA09137 Preparation: DULUX AcraTex 400/4 Tiltwash @ 7 m²/L 1st coat: DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L 2nd coat: DULUX Elastomeric 201 @ 4 m²/L 3rd coat: DULUX Elastomeric 201 @ 4 m²/L 4.4 EXTERIOR TILT-UP, PRECAST & OFF THE FORM CONCRETE NEW - WALLS - WATER REPELLENT SYSTEM Gloss level: Matt Coating type: Water based masonry sealer System: Performance Solutions (supplied by Dulux) Preparation: DULUX AcraTex 400/4 Tiltwash @ 7 m²/L 1st coat: MicroSeal</p><p>4.5 EXTERIOR TILT-UP, PRECAST AND OFF THE FORM CONCRETE NEW - WALLS - CLEAR Gloss level: Matt Coating type: Single pack solvent based moisture cured clear polyurethane System: DuSpec NZ_SD09353 Preparation: DULUX AcraTex 400/4 Tiltwash @ 7 m²/L 1st coat: MAXIPROOF (Gloss) @ 8 m²/L 2nd coat: MAXIPROOF (Gloss) @ 8 m²/L 3rd coat: MAXIPROOF (Matt) @ 8 m²/L</p><p>4.6 EXTERIOR MASONRY NEW - WALLS - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09194 1st coat: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L 3rd coat: DULUX Weathershield X10 @ 16 m²/L</p><p>4.7 EXTERIOR MASONRY NEW - WALLS - HIGH BUILD 170 MICRON DFT Gloss level: Matt Coating type: Water based high build System: DuSpec NZ_SA09151 1st coat: DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L 2nd coat: DULUX AcraTex AcraShield Advance @ 6 m²/L 3rd coat: DULUX AcraTex AcraShield Advance @ 6 m²/L</p><p>4.8 EXTERIOR MASONRY NEW - WALLS - HIGH BUILD 270 MICRON DFT Gloss level: Matt Coating type: Water based high build System: DuSpec NZ_SA09136 1st coat: DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L 2nd coat: DULUX Elastomeric 201 @ 4 m²/L 3rd coat: DULUX Elastomeric 201 @ 4 m²/L</p><p>4.9 EXTERIOR MASONRY NEW -- WALLS - WATER REPELLENT SYSTEM Gloss level: Matt Coating type: Water based masonry sealer System: Performance Solutions (supplied by Dulux) Preparation: DULUX AcraTex 400/4 Tiltwash @ 7 m²/L 1st coat: MicroSeal</p><p>4.10 EXTERIOR MASONRY NEW -- WALLS - CLEAR Gloss level: Matt Coating type: Single pack solvent based moisture cured clear polyurethane System: DuSpec NZ_SD09179 1st coat: MAXIPROOF Gloss) @ 8 m²/L 2nd coat: MAXIPROOF (Gloss) @ 8 m²/L 3rd coat: MAXIPROOF (Matt) @ 8 m²/L</p><p>Masonry and cementitious substrates - new areas, foot traffic</p><p>4.11 EXTERIOR CONCRETE NEW - FOOT TRAFFIC - PAINT Gloss level: Satin Coating type: Water based System: DuSpec NZ_SD09184 1st coat: DULUX AquaTread Undercoat @ 11.5 m²/L 2nd coat: DULUX AquaTread @ 11.5 m²/L 3rd coat: DULUX AquaTread @ 11.5 m²/L</p><p>4.12 EXTERIOR CONCRETE NEW - FOOT TRAFFIC - WATER BASED CLEAR Gloss level: Satin Coating type: Water based clear System: DuSpec NZ_SD09174 1st coat: DULUX AquaTread Clear Sealer @ 11.2 m²/L 2nd coat: DULUX AquaTread Clear Sealer @ 11.2 m²/L</p><p>4.13 EXTERIOR CONCRETE NEW - FOOT TRAFFIC - SOLVENT BASED CLEAR Gloss level: Matt Coating type: Single pack solvent based moisture cured clear polyurethane System: DuSpec NZ_SD09180 1st coat: MAXIPROOF (Gloss) @ 8 m²/L 2nd coat: MAXIPROOF (Gloss) @ 8 m²/L 3rd coat: MAXIPROOF (Matt) @ 8 m²/L</p><p>Masonry and cementitious substrates - new areas, vehicle traffic</p><p>4.14 EXTERIOR CONCRETE NEW - VEHICLE TRAFFIC - SOLVENT BASED CLEAR Gloss level: Gloss Coating type: Two pack solvent based epoxy + two pack solvent based acrylic polyurethane System: DuSpec NZ_SC09186 1st coat: DULUX Durebild STE @ 125 microns DFT 2nd coat: DULUX Durebild STE @ 125 microns DFT 3rd coat: DULUX Weathermax HBR @ 100 microns DFT</p><p>Fibre cement sheet substrates - new cladding</p><p>4.15 EXTERIOR FIBRE CEMENT SHEET NEW - CLADDING - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09169 1st coat: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L 3rd coat: DULUX Weathershield X10 @ 16 m²/L</p><p>4.16 EXTERIOR FIBRE CEMENT SHEET NEW - CLADDING - HIGH BUILD Gloss level: Matt Coating type: Water based high build System: DuSpec NZ_SA09150 1st coat: DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L 2nd coat: DULUX AcraTex AcraShield Advance @ 6 m²/L 3rd coat: DULUX AcraTex AcraShield Advance @ 6 m²/L</p><p>4.17 EXTERIOR FIBRE CEMENT SHEET NEW - CLADDING - CLEAR Gloss level: Matt Coating type: Single pack solvent based moisture cured clear polyurethane System: DuSpec NZ_SW09164 1st coat: MAXIPROOF (Gloss) @ 8 m²/L 2nd coat: MAXIPROOF (Gloss) @ 8 m²/L 3rd coat: MAXIPROOF (Matt) @ 8 m²/L</p><p>Timber substrates - new cladding</p><p>4.18 EXTERIOR TIMBER NEW - CLADDING - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09216 1st coat: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L 3rd coat: DULUX Weathershield X10 @ 16 m²/L</p><p>4.19 EXTERIOR CEDAR NEW - CLADDING - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09215 1st coat: DULUX 1 Step Oil Based Primer Sealer & Undercoat @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L 3rd coat: DULUX Weathershield X10 @ 16 m²/L</p><p>4.20 EXTERIOR TIMBER NEW - CLADDING - WATER BASED STAIN Gloss level: Matt Coating type: Water based stain System: DuSpec NZ_SW09224 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: INTERGRAIN NaturalStain @ 9 m²/L 2nd coat: INTERGRAIN NaturalStain @ 9 m²/L 3rd coat: INTERGRAIN NaturalStain @ 9 m²/L (optional)</p><p>4.21 EXTERIOR TIMBER NEW - CLADDING - SOLVENT BASED STAIN Gloss level: Matt Coating type: Solvent based oil System: DuSpec NZ_SW09226 Preparation: CABOT'S Deck Clean @ 12-16 m²/L 1st coat: CABOT'S Deck & Exterior Stain Oil Based 2nd coat: CABOT'S Deck & Exterior Stain Oil Based 3rd coat: CABOT'S Deck & Exterior Stain Oil Based (optional)</p><p>Timber substrates - new trim, doors, frames, etc</p><p>4.22 EXTERIOR TIMBER NEW - TRIM, DOORS AND FRAMES - WATER BASED ENAMEL Gloss level: Semi Gloss Coating type: Water based enamel System: DuSpec NZ_SD09147 1st coat:: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 2nd coat: DULUX Aquanamel @ 16 m²/L 3rd coat: DULUX Aquanamel @ 16 m²/L</p><p>4.23 EXTERIOR TIMBER NEW - TRIM, DOORS AND FRAMES - SOLVENT BASED ENAMEL Gloss level: Semi Gloss Coating type: Solvent based enamel System: DuSpec NZ_SD09240 1st coat:: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 2nd coat: DULUX Super Enamel @ 16.1 m²/L 3rd coat: DULUX Super Enamel @ 16.1 m²/L</p><p>4.24 EXTERIOR TIMBER NEW - TRIM, DOORS AND FRAMES - SOLVENT BASED CLEAR Gloss level: Matt Coating type: Single pack solvent based moisture cured clear polyurethane System: DuSpec NZ_SW09232 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: MAXIPROOF (Gloss) @ 8 m²/L 2nd coat: MAXIPROOF (Gloss) @ 8 m²/L 3rd coat: MAXIPROOF (Matt) @ 8 m²/L</p><p>4.25 EXTERIOR TIMBER NEW - TRIM, DOORS AND FRAMES - WATER BASED STAIN Gloss level: Matt Coating type: Water based stain System: DuSpec NZ_SW09224 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: INTERGRAIN NaturalStain @ 9 m²/L 2nd coat: INTERGRAIN NaturalStain @ 9 m²/L 3rd coat: INTERGRAIN NaturalStain @ 9 m²/L (optional)</p><p>4.26 EXTERIOR TIMBER NEW - TRIM, DOORS AND FRAMES - SOLVENT BASED STAIN Gloss level: Matt Coating type: Water based stain System: DuSpec NZ_SW09226 Preparation: CABOT'S Deck Clean @ 12-16 m²/L 1st coat: CABOT'S Deck & Exterior Stain Oil Based 2nd coat: CABOT'S Deck & Exterior Stain Oil Based 3rd coat: CABOT'S Deck & Exterior Stain Oil Based (optional)</p><p>Timber substrates - new fences, pergolas, etc</p><p>4.27 EXTERIOR TIMBER NEW - FENCES AND PERGOLAS - PAINT Gloss level: Low Sheen Coating type: Water based System: DuSpec NZ_SD09236 Preparation: CABOT'S Deck Clean @ 12-16 m²/L 1st coat: DULUX Timbacryl @ 16.4 m²/L 2nd coat: DULUX Timbacryl @ 16.4 m²/L 3rd coat: DULUX Timbacryl @ 16.4 m²/L</p><p>4.28 EXTERIOR TIMBER NEW - FENCES AND PERGOLAS - WATER BASED STAIN Gloss level: Matt Coating type: Water based stain System: DuSpec NZ_SW09224 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: INTERGRAIN NaturalStain @ 9 m²/L 2nd coat: INTERGRAIN NaturalStain @ 9 m²/L 3rd coat: INTERGRAIN NaturalStain @ 9 m²/L (optional)</p><p>4.29 EXTERIOR TIMBER NEW - FENCES AND PERGOLAS - SOLVENT BASED STAIN Gloss level: Matt Coating type: Solvent based stain System: DuSpec NZ_SW09226 Preparation: CABOT'S Deck Clean @ 12-16 m²/L 1st coat: CABOT'S Deck & Exterior Stain Oil Based @ 10 m²/L 2nd coat: CABOT'S Deck & Exterior Stain Oil Based @ 10 m²/L 3rd coat: CABOT'S Deck & Exterior Stain Oil Based @ 10 m²/L (optional)</p><p>Timber substrates - new decks</p><p>4.30 EXTERIOR TIMBER NEW - DECKS - PAINT Gloss level: Low Sheen Coating type: Water based System: DuSpec NZ_SD09236 1st coat: DULUX Timbacryl @ 16.4 m²/L 2nd coat: DULUX Timbacryl @ 16.4 m²/L 3rd coat: DULUX Timbacryl @ 16.4 m²/L</p><p>4.31 EXTERIOR TIMBER NEW - DECKS - SOLVENT BASED CLEAR Gloss level: Matt Coating type: Single pack solvent based moisture cured clear polyurethane System: DuSpec NZ_SW09232 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: MAXIPROOF (Gloss) @ 8 m²/L 2nd coat: MAXIPROOF (Gloss) @ 8 m²/L 3rd coat: MAXIPROOF (Matt) @ 8 m²/L</p><p>4.32 EXTERIOR TIMBER NEW - DECKS - NATURAL OIL Gloss level: Matt Coating type: Solvent based oil System: DuSpec NZ_SW09234 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: INTERGRAIN Nature's Timber Oil @ 8.3 m²/L 2nd coat: INTERGRAIN Nature's Timber Oil @ 8.3 m²/L</p><p>4.33 EXTERIOR TIMBER NEW - DECKS - WATER BASED OIL Gloss level: Matt Coating type: Water based oil System: DuSpec NZ_SW09228 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: INTERGRAIN UltraDeck @ 12 m²/L 2nd coat: INTERGRAIN UltraDeck @ 12 m²/L 3rd coat: INTERGRAIN UltraDeck @ 12 m²/L (optional)</p><p>4.34 EXTERIOR TIMBER NEW - DECKS - WATER BASED STAIN Gloss level: Matt Coating type: Water based stain System: DuSpec NZ_SW09224 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: INTERGRAIN NaturalStain @ 9 m²/L 2nd coat: INTERGRAIN NaturalStain @ 9 m²/L 3rd coat: INTERGRAIN NaturalStain @ 9 m²/L (optional)</p><p>4.35 EXTERIOR TIMBER NEW - DECKS - SOLVENT BASED STAIN Gloss level: Matt Coating type: Solvent based stain System: DuSpec NZ_SW09226 Preparation: CABOT'S Deck Clean @ 12-16 m²/L 1st coat: CABOT'S Deck & Exterior Stain Oil Based @ 10 m²/L 2nd coat: CABOT'S Deck & Exterior Stain Oil Based @ 10 m²/L 3rd coat: CABOT'S Deck & Exterior Stain Oil Based @ 10 m²/L (optional)</p><p>Plastic substrates - new</p><p>4.36 EXTERIOR PLASTIC NEW - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09205 1st coat: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L 3rd coat: DULUX Weathershield X10 @ 16 m²/L</p><p>Metal substrates - new</p><p>4.37 EXTERIOR METAL ROOF NEW - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09279 1st coat: DULUX Roof & Trim @ 16 m²/L 2nd coat: DULUX Roof & Trim @ 16 m²/L 3rd coat: DULUX Roof & Trim @ 16 m²/L</p><p>4.38 EXTERIOR MILD STEEL NEW - DECORATIVE PAINT Gloss level: Semi Gloss Coating type: Water based zinc primer + water based topcoat System: DuSpec NZ_SD09257 1st coat: DULUX Quit Rust All Metal Primer @ 14.8 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L 3rd coat: DULUX Weathershield X10 @ 16 m²/L</p><p>4.39 EXTERIOR MILD STEEL NEW - LIGHT INDUSTRIAL COATING Gloss level: Gloss Coating type: Solvent based zinc phosphate primer + solvent based enamel System: DuSpec NZ_SC09296 1st coat: DULUX Metalshield All Surface Primer @ 15 m²/L 2nd coat: DULUX Metalshield FD Enamel @ 8.5 m²/L 3rd coat: DULUX Metalshield FD Enamel @ 8.5 m²/L</p><p>4.40 EXTERIOR MILD STEEL NEW - PROTECTIVE COATING Gloss level: Gloss Coating type: Two pack solvent based zinc phosphate epoxy primer+ two pack solvent based acrylic polyurethane System: DuSpec NZ_SC09306 1st coat DULUX Duremax GPE ZP @ 150 microns DFT 2nd coat: DULUX Weathermax HBR @ 100 microns DFT</p><p>4.41 EXTERIOR MILD STEEL NEW - PROTECTIVE COATING - METALLIC FINISH Gloss level: Gloss Coating type: Two pack solvent based zinc phosphate epoxy primer+ two pack solvent based metallic polyurethane + two pack solvent based acrylic clear polyurethane System: DuSpec NZ_SC09312 1st coat: DULUX Duremax GPE ZP @ 150 microns DFT 2nd coat: DULUX Quantum FX @ 55 microns DFT 3rd coat: DULUX Quantum Clearcoat @ 45 microns DFT</p><p>4.42 EXTERIOR GALVANIZED NEW - WATER BASED DECORATIVE PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09258 1st coat: DULUX Quit Rust All Metal Primer @ 14.8 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L 3rd coat: DULUX Weathershield X10 @ 16 m²/L</p><p>4.43 EXTERIOR GALVANIZED NEW - LIGHT INDUSTRIAL COATING Gloss level: Gloss Coating type: Solvent based zinc phosphate primer + solvent based enamel System: DuSpec NZ_SC09297 1st coat: DULUX Metalshield All Surface Primer @ 15 m²/L 2nd coat: DULUX Metalshield FD Enamel @ 8.5 m²/L 3rd coat: DULUX Metalshield FD Enamel @ 8.5 m²/L</p><p>4.44 EXTERIOR GALVANIZED NEW - PROTECTIVE COATING Gloss level: Gloss Coating type: Two pack solvent based zinc phosphate epoxy primer + two pack solvent based acrylic polyurethane System: DuSpec NZ_SC09305 1st coat: DULUX Duremax GPE ZP @ 150 microns DFT 2nd coat: DULUX Weathermax HBR @ 100 microns DFT</p><p>4.45 EXTERIOR GALVANIZED NEW - PROTECTIVE COATING - METALLIC FINISH Gloss level: Gloss Coating type: Two pack solvent based zinc phoshate epoxy primer+ two pack solvent based metallic polyurethane + two pack solvent based acrylic clear polyurethane System: DuSpec NZ_SC09313 1st coat: DULUX Duremax GPE ZP @ 150 microns DFT 2nd coat: DULUX Quantum FX @ 55 microns DFT 3rd coat: DULUX Quantum Clearcoat @ 45 microns DFT</p><p>4.46 EXTERIOR NON FERROUS METAL NEW - WALLS - DECORATIVE PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09256 1st coat: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L 3rd coat:: DULUX Weathershield X10 @ 16 m²/L</p><p>4.47 EXTERIOR NON FERROUS METAL NEW - DOORS, TRIMS AND FRAMES - DECORATIVE PAINT Gloss level: Semi Gloss Coating type: Water based enamel System: DuSpec NZ_SD09148 1st coat: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 2nd coat: DULUX Aquanamel @ 16m²/L 3rd coat: DULUX Aquanamel @ 16 m²/L</p><p>4.48 EXTERIOR NON FERROUS NEW - LIGHT INDUSTRIAL COATING Gloss level: Gloss Coating type: Solvent based zinc phosphate primer + solvent based enamel System: DuSpec NZ_SC09301 1st coat: DULUX Metalshield RFU Etch Primer @ 8 m²/L 2nd coat: DULUX Metalshield FD Enamel @ 8.5 m²/L 3rd coat: DULUX Metalshield FD Enamel @ 8.5 m²/L</p><p>4.49 EXTERIOR NON FERROUS METAL NEW - PROTECTIVE COATING Gloss level: Gloss Coating type: Two pack solvent based acrylic polyurethane System: DuSpec NZ_SC09307 1st coat: DULUX Durebild STE @ 125 microns DFT 2nd coat: DULUX Weathermax HBR @ 100 microns DFT</p><p>4.50 EXTERIOR NON FERROUS METAL NEW - PROTECTIVE COATING - METALLIC FINISH Gloss level: Gloss Coating type: Two pack solvent based epoxy + two pack solvent based metallic polyurethane + two pack solvent based acrylic clear polyurethane System: DuSpec NZ_SC09311 1st coat: DULUX Durebild STE @ 125 microns DFT 2nd coat: DULUX Quantum FX @ 55 microns DFT 3rd coat: DULUX Quantum Clearcoat @ 45 microns DFT</p><p>Anti graffiti - non sacrificial</p><p>4.51 ANTI GRAFFITI OVER BARE SUBSTRATE (EXCL TILT UP) - 2 PACK CLEAR GLOSS Gloss level: Gloss Coating type: Two pack solvent based acrylic clear polyurethane System: DuSpec NZ_SC09132 Preparation: DULUX Prep Wash @ 6 m²/L 1st coat: DULUX Quantum Clearcoat @ 45 microns DFT 2nd coat: DULUX Quantum Clearcoat @ 45 microns DFT 3rd coat: DULUX Quantum Clearcoat @ 45 microns DFT</p><p>4.52 ANTI GRAFFITI OVER BARE SUBSTRATE (EXCL TILT UP) -SINGLE PACK CLEAR SATIN Gloss level: Satin Coating type: Antigraffiti coating System: Performance Solutions (supplied by Dulux) Preparation: DULUX Prep Wash @ 6 m²/L 1st coat: MicroSeal 2nd coat: VandlGuard 3rd coat: VandlGuard 4th coat: VandlGuard (optional)</p><p>4.53 ANTI GRAFFITI OVER TILT UP, PRECAST AND OFF THE FORM CONCRETE - 2 PACK CLEAR GLOSS Gloss level: Gloss Coating type: Two pack solvent based acrylic clear polyurethane System: DuSpec NZ_SC09133 Preparation: DULUX AcraTex 400/4 Tiltwash @ 7 m²/L 1st coat: DULUX Quantum Clearcoat @ 45 microns DFT 2nd coat: DULUX Quantum Clearcoat @ 45 microns DFT 3rd coat: DULUX Quantum Clearcoat @ 45 microns DFT</p><p>4.54 ANTI GRAFFITI OVER TILT UP, PRECAST AND OFF THE FORM CONCRETE -SINGLE PACK CLEAR SATIN Gloss level: Satin Coating type: Antigraffiti coating System: Performance Solutions (supplied by Dulux) Preparation: DULUX AcraTex 400/4 Tiltwash @ 7 m²/L 1st coat: MicroSeal 2nd coat: VandlGuard 3rd coat: VandlGuard 4th coat: VandlGuard (optional)</p><p>4.55 ANTI GRAFFITI OVER NEWLY PAINTED - 2 PACK CLEAR GLOSS Gloss level: Gloss Coating type: Two pack solvent based acrylic clear polyurethane System: DuSpec NZ_SC09131 1st coat: DULUX Quantum Clearcoat @ 45 microns DFT</p><p>4.56 ANTI GRAFFITI OVER NEWLY PAINTED - SINGLE PACK CLEAR SATIN Gloss level: Satin Coating type: Antigraffiti coating System: Performance Solutions (supplied by Dulux) 1st coat: VandlGuard 2nd coat: VandlGuard 3rd coat: VandlGuard (optional)</p><p>4.57 ANTI GRAFFITI OVER EXISTING COATING - PIGMENTED GLOSS Gloss level: Gloss Coating type: Two pack solvent based epoxy + two pack solvent based acrylic polyurethane System: DuSpec NZ_SC09134 Preparation: DULUX Prep Wash @ 6 m²/L 1st coat: DULUX Durebild STE @ 125 microns DFT 2nd coat: DULUX Weathermax HBR @ 100 microns DFT</p><p>Masonry and cementitious substrates - existing walls</p><p>4.58 EXTERIOR TILT-UP, PRECAST AND OFF THE FORM CONCRETE EXISTING - WALLS - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09193 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 1st coat: DULUX Weathershield X10 @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L</p><p>4.59 EXTERIOR TILT-UP, PRECAST & OFF FORM CONCRETE EXISTING - HIGH BUILD 170 MICRON DFT Gloss level: Matt Coating type: Water based high build System: DuSpec NZ_SA09159 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L 1st coat: DULUX AcraTex AcraShield Advance @ 6 m²/L 2nd coat: DULUX AcraTex AcraShield Advance @ 6 m²/L</p><p>4.60 EXTERIOR TILT-UP, PRECAST & OFF FORM CONCRETE EXISTING - HIGH BUILD 270 MICRON DFT Gloss level: Matt Coating type: Water based high build System: DuSpec NZ_SA09139 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L 1st coat: DULUX Elastomeric 201 @ 4 m²/L 2nd coat: DULUX Elastomeric 201 @ 4 m²/L</p><p>4.61 EXTERIOR TILT-UP, PRECAST AND OFF THE FORM CONCRETE EXISTING - WALLS - CLEAR Gloss level: Matt Coating type: Single pack solvent based moisture cured clear polyurethane System: DuSpec NZ_SD09350 Preparation: DULUX Prep Wash @ 6 m²/L 1st coat: MAXIPROOF (Gloss) @ 8 m²/L 2nd coat: MAXIPROOF (Gloss) @ 8 m²/L 3rd coat: MAXIPROOF (Matt) @ 8 m²/L</p><p>4.62 EXTERIOR MASONRY EXISTING - WALLS - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09192 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 1st coat: DULUX Weathershield X10 @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L</p><p>4.63 EXTERIOR MASONRY EXISTING - WALLS - HIGH BUILD 170 MICRON DFT Gloss level: Matt Coating type: Water based high build System: DuSpec NZ_SA09158 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L 1st coat: DULUX AcraTex AcraShield Advance @ 6 m²/L 2nd coat: DULUX AcraTex AcraShield Advance @ 6 m²/L</p><p>4.64 EXTERIOR MASONRY EXISTING - WALLS - HIGH BUILD 270 MICRON DFT Gloss level: Matt Coating type: Water based high build System: DuSpec NZ_SA09138 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L 1st coat: DULUX Elastomeric 201 @ 4 m²/L 2nd coat: DULUX Elastomeric 201 @ 4 m²/L</p><p>4.65 EXTERIOR MASONRY EXISTING - WALLS - CLEAR Gloss level: Matt Coating type: Single pack solvent based moisture cured clear polyurethane System: DuSpec NZ_SD09181 Preparation: DULUX Prep Wash @ 6 m²/L 1st coat: MAXIPROOF(Gloss) @ 8 m²/L 2nd coat: MAXIPROOF(Gloss) @ 8 m²/L 3rd coat: MAXIPROOF(Matt) @ 8 m²/L Masonry and cementitious substrates - existing areas, foot traffic</p><p>4.66 EXTERIOR CONCRETE EXISTING - FOOT TRAFFIC - PAINT Gloss level: Satin Coating type: Water based System: DuSpec NZ_SD09183 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX AquaTread Undercoat @ 11.5 m²/L 1st coat: DULUX AquaTread @ 11.5 m²/L 2nd coat: DULUX AquaTread @ 11.5 m²/L</p><p>4.67 EXTERIOR CONCRETE EXISTING - FOOT TRAFFIC - WATER BASED CLEAR Gloss level: Satin Coating type: Water based clear System: DuSpec NZ_SD09173 Preparation: DULUX Prep Wash @ 6 m²/L 1st coat: DULUX AquaTread Clear Sealer @ 11.2 m²/L 2nd coat: DULUX AquaTread Clear Sealer @ 11.2 m²/L</p><p>4.68 EXTERIOR CONCRETE EXISTING - FOOT TRAFFIC - SOLVENT BASED CLEAR Gloss level: Matt Coating type: Single pack solvent based moisture cured clear polyurethane System: DuSpec NZ_SD09182 Preparation: DULUX Prep Wash @ 6 m²/L 1st coat: MAXIPROOF (Gloss) @ 8 m²/L 2nd coat: MAXIPROOF (Gloss) @ 8 m²/L 3rd coat: MAXIPROOF (Matt) @ 8 m²/L</p><p>Masonry and cementitious substrates - existing areas, vehicle traffic</p><p>4.69 EXTERIOR CONCRETE EXISTING - VEHICLE TRAFFIC - SOLVENT BASED CLEAR Gloss level: Gloss Coating type: Two pack solvent based epoxy + two pack solvent based acrylic polyurethane System: DuSpec NZ_SC09185 Preparation: DULUX Prep Wash @ 6 m²/L 1st coat: DULUX Durebild STE @ 125 microns DFT 2nd coat: DULUX Durebild STE @ 125 microns DFT 3rd coat: DULUX Weathermax HBR @ 100 microns DFT</p><p>Fibre cement sheet substrates - existing cladding</p><p>4.70 EXTERIOR FIBRE CEMENT SHEET EXISTING - CLADDING - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09168 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 1st coat: DULUX Weathershield X10 @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L</p><p>4.71 EXTERIOR FIBRE CEMENT SHEET EXISTING - CLADDING - HIGH BUILD Gloss level: Matt Coating type: Water based high build System: DuSpec NZ_SA09157 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX AcraTex AcraPrime 501/1 Water Based @ 10 m²/L 1st coat: DULUX AcraTex AcraShield Advance @ 6 m²/L 2nd coat: DULUX AcraTex AcraShield Advance @ 6 m²/L 4.72 EXTERIOR FIBRE CEMENT SHEET EXISTING - CLADDING - CLEAR Gloss level: Matt Coating type: Single pack solvent based moisture cured clear polyurethane System: DuSpec NZ_SW09165 Preparation: DULUX Prep Wash @ 6 m²/L 1st coat: MAXIPROOF (Gloss) @ 8 m²/L 2nd coat: MAXIPROOF (Gloss) @ 8 m²/L 3rd coat: MAXIPROOF (Matt) @ 8 m²/L</p><p>Timber substrates - existing cladding</p><p>4.73 EXTERIOR TIMBER EXISTING - CLADDING - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09213 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 1st coat: DULUX Weathershield X10 @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L</p><p>4.74 EXTERIOR CEDAR EXISTING - CLADDING - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09214 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX 1 Step Oil Based Primer Sealer & Undercoat @ 16 m²/L 1st coat: DULUX Weathershield X10 @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L</p><p>4.75 EXTERIOR TIMBER EXISTING - CLADDING - WATER BASED STAIN Gloss level: Matt Coating type: Water based stain System: DuSpec NZ_SW09223 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: INTERGRAIN NaturalStain @ 9 m²/L 2nd coat: INTERGRAIN NaturalStain @ 9 m²/L 3rd coat: INTERGRAIN NaturalStain @ 9 m²/L (optional)</p><p>4.76 EXTERIOR TIMBER EXISTING - CLADDING - SOLVENT BASED STAIN Gloss level: Matt Coating type: Solvent based oil System: DuSpec NZ_SW09225 Preparation: CABOT'S Deck Clean @ 12-16 m²/L 1st coat: CABOT'S Deck & Exterior Stain Oil Based 2nd coat: CABOT'S Deck & Exterior Stain Oil Based 3rd coat: CABOT'S Deck & Exterior Stain Oil Based (optional)</p><p>Timber substrates - existing trims, doors, frames, etc</p><p>4.77 EXTERIOR TIMBER EXISTING - TRIM, DOORS AND FRAMES - WATER BASED ENAMEL Gloss level: Semi Gloss Coating type: Water based enamel System: DuSpec NZ_SD09146 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 1st coat: DULUX Aquanamel @ 16 m²/L 2nd coat: DULUX Aquanamel @ 16 m²/L</p><p>4.78 EXTERIOR TIMBER EXISTING - TRIM, DOORS AND FRAMES - SOLVENT BASED ENAMEL Gloss level: Semi Gloss Coating type: Solvent based enamel System: DuSpec NZ_SD09239 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 1st coat: DULUX Super Enamel @ 16.1 m²/L 2nd coat: DULUX Super Enamel @ 16.1 m²/L</p><p>4.79 EXTERIOR TIMBER EXISTING - TRIM, DOORS AND FRAMES - SOLVENT BASED CLEAR Gloss level: Matt Coating type: Single pack solvent based moisture cured clear polyurethane System: DuSpec NZ_SW0921 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: MAXIPROOF (Gloss) @ 8 m²/L 2nd coat: MAXIPROOF (Gloss) @ 8 m²/L 3rd coat: MAXIPROOF (Matt) @ 8 m²/L</p><p>4.80 EXTERIOR TIMBER EXISTING - TRIM, DOORS AND FRAMES - WATER BASED STAIN Gloss level: Matt Coating type: Water based stain System: DuSpec NZ_SW09223 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: INTERGRAIN NaturalStain @ 9 m²/L 2nd coat: INTERGRAIN NaturalStain @ 9 m²/L 3rd coat: INTERGRAIN NaturalStain @ 9 m²/L (optional)</p><p>4.81 EXTERIOR TIMBER EXISTING - TRIM, DOORS AND FRAMES - SOLVENT BASED STAIN Gloss level: Matt Coating type: Solvent based oil System: DuSpec NZ_SW09225 Preparation: CABOT'S Deck Clean @ 12-16 m²/L 1st coat: CABOT'S Deck & Exterior Stain Oil Based 2nd coat: CABOT'S Deck & Exterior Stain Oil Based 3rd coat: CABOT'S Deck & Exterior Stain Oil Based (optional</p><p>Timber substrates - existing fences, pergolas, etc</p><p>4.82 EXTERIOR TIMBER EXISTING - FENCES AND PERGOLAS - PAINT Gloss level: Low Sheen Coating type: Water based System: DuSpec NZ_SD09235 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Timbacryl @ 16.4 m²/L 1st coat: DULUX Timbacryl @ 16.4 m²/L 2nd coat: DULUX Timbacryl @ 16.4 m²/L</p><p>4.83 EXTERIOR TIMBER EXISTING - FENCES AND PERGOLAS - WATER BASED STAIN Gloss level: Matt Coating type: Water based stain System: DuSpec NZ_SW09223 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: INTERGRAIN NaturalStain @ 9 m²/L 2nd coat: INTERGRAIN NaturalStain @ 9 m²/L 3rd coat: INTERGRAIN NaturalStain @ 9 m²/L (optional)</p><p>4.84 EXTERIOR TIMBER EXISTING - FENCES AND PERGOLAS - SOLVENT BASED STAIN Gloss level: Matt Coating type: Solvent based oil System: DuSpec NZ_SW09225 Preparation: CABOT'S Deck Clean @ 12-16 m²/L 1st coat: CABOT'S Deck & Exterior Stain Oil Based @ 10 m²/L 2nd coat: CABOT'S Deck & Exterior Stain Oil Based @ 10 m²/L 3rd coat: CABOT'S Deck & Exterior Stain Oil Based @ 10 m²/L (optional) Timber substrates - existing decks</p><p>4.85 EXTERIOR TIMBER EXISTING - DECKS - PAINT Gloss level: Low Sheen Coating type: Water based System: DuSpec NZ_SD09235 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Timbacryl @ 16.4 m²/L 1st coat: DULUX Timbacryl @ 16.4 m²/L 2nd coat: DULUX Timbacryl @ 16.4 m²/L</p><p>4.86 EXTERIOR TIMBER EXISTING - DECKS - SOLVENT BASED CLEAR Gloss level: Matt Coating type: Single pack solvent based moisture cured clear polyurethane System: DuSpec NZ_SW09231 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: MAXIPROOF (Gloss) @ 8 m²/L 2nd coat: MAXIPROOF (Gloss) @ 8 m²/L 3rd coat: MAXIPROOF (Matt) @ 8 m²/L</p><p>4.87 EXTERIOR TIMBER EXISTING - DECKS - NATURAL OIL Gloss level: Matt Coating type: Solvent based oil System: DuSpec NZ_SW09233 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: NTERGRAIN Nature's Timber Oil @ 8.3 m²/L 2nd coat: NTERGRAIN Nature's Timber Oil @ 8.3 m²/L</p><p>4.88 EXTERIOR TIMBER EXISTING - DECKS - WATER BASED OIL Gloss level: Matt Coating type: Water based stain System: DuSpec NZ_SW09227 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: INTERGRAIN UltraDeck @ 12 m²/L 2nd coat: INTERGRAIN UltraDeck @ 12 m²/L 3rd coat: INTERGRAIN UltraDeck @ 12 m²/L (optional)</p><p>4.89 EXTERIOR TIMBER EXISTING - DECKS - WATER BASED STAIN Gloss level: Matt Coating type: Water based stain System: DuSpec NZ_SW09223 Preparation: INTERGRAIN Reviva @ 20-40 m²/L 1st coat: INTERGRAIN NaturalStain @ 9 m²/L 2nd coat: INTERGRAIN NaturalStain @ 9 m²/L 3rd coat: INTERGRAIN NaturalStain @ 9 m²/L (optional)</p><p>4.90 EXTERIOR TIMBER EXISTING - DECKS - SOLVENT BASED STAIN Gloss level: Matt Coating type: Solvent based oil System: DuSpec NZ_SW09225 Preparation: CABOT'S Deck Clean @ 12-16 m²/L 1st coat: CABOT'S Deck & Exterior Stain Oil Based @ 10 m²/L 2nd coat: CABOT'S Deck & Exterior Stain Oil Based @ 10 m²/L 3rd coat: CABOT'S Deck & Exterior Stain Oil Based @ 10 m²/L (optional)</p><p>Plastic substrates - existing</p><p>4.91 EXTERIOR PLASTIC EXISTING - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09206 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 1st coat: DULUX Weathershield X10 @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L</p><p>Metal substrates - existing</p><p>4.92 EXTERIOR METAL ROOF EXISTING - PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09281 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Quit Rust All Metal Primer @ 14.8 m²/L 1st coat: DULUX Roof & Trim @ 16 m²/L 2nd coat: DULUX Roof & Trim @ 16 m²/L</p><p>4.93 EXTERIOR MILD STEEL EXISTING - DECORATIVE PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09260 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Quit Rust All Metal Primer @ 14.8 m²/L 1st coat: DULUX Weathershield X10 @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L</p><p>4.94 EXTERIOR MILD STEEL EXISTING - LIGHT INDUSTRIAL COATING Gloss level: Gloss Coating type: Solvent based enamel System: DuSpec NZ_SC09295 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Metalshield All Surface Primer @ 15 m²/L 1st coat: DULUX Metalshield FD Enamel @ 8.5 m²/L 2nd coat: DULUX Metalshield FD Enamel @ 8.5 m²/L</p><p>4.95 EXTERIOR MILD STEEL EXISTING - PROTECTIVE COATING Gloss level: Gloss Coating type: Two pack solvent based epoxy + two pack solvent based acrylic polyurethane System: DuSpec NZ_SC09303 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Durebild STE @ 125 microns DFT 1st coat DULUX Durebild STE @ 125 microns DFT 2nd coat: DULUX Weathermax HBR @ 100 microns DFT</p><p>4.96 EXTERIOR MILD STEEL NEW - PROTECTIVE COATING - METALLIC FINISH Gloss level: Gloss Coating type: Two pack solvent based epoxy + two pack solvent based metallic polyurethane + two pack solvent based acrylic clear polyurethane System: DuSpec NZ_SC09308 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Durebild STE @ 125 microns DFT 1st coat: DULUX Durebild STE @ 125 microns DFT 2nd coat: DULUX Quantum FX @ 55 microns DFT 3rd coat: DULUX Quantum Clearcoat @ 45 microns DFT</p><p>4.97 EXTERIOR GALVANIZED EXISTING - DECORATIVE PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09259 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Quit Rust All Metal Primer @ 14.8 m²/L 1st coat: DULUX Weathershield X10 @ 16 m²/L 2nd coat: DULUX Weathershield X10 @ 16 m²/L</p><p>4.98 EXTERIOR GALVANIZED EXISTING - LIGHT INDUSTRIAL COATING Gloss level: Gloss Coating type: Solvent based zinc phosphate primer + solvent based enamel System: DuSpec NZ_SC09294 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Metalshield All Surface Primer @ 15 m²/L 1st coat: DULUX Metalshield FD Enamel @ 8.5 m²/L 2nd coat: DULUX Metalshield FD Enamel @ 8.5 m²/L</p><p>4.99 EXTERIOR GALVANIZED EXISTING - PROTECTIVE COATING Gloss level: Gloss Coating type: Two pack solvent based epoxy + two pack solvent based acrylic polyurethane System: DuSpec NZ_SC09302 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Durebild STE @ 125 microns DFT 1st coat: DULUX Durebild STE @ 125 microns DFT 2nd coat: DULUX Weathermax HBR @ 100 microns DFT</p><p>4.100 EXTERIOR GALVANIZED EXISTING - PROTECTIVE COATING - METALLIC FINISH Gloss level: Gloss Coating type: Two pack solvent based epoxy + two pack solvent based metallic polyurethane + two pack solvent based acrylic clear polyurethane System: DuSpec NZ_SC09310 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Durebild STE @ 125 microns DFT 1st coat: DULUX Durebild STE @ 125 microns DFT 2nd coat: DULUX Quantum FX @ 55 microns DFT 3rd coat: DULUX Quantum Clearcoat @ 45 microns DFT</p><p>4.101 EXTERIOR NON FERROUS METAL EXISTING - WALLS - DECORATIVE PAINT Gloss level: Semi Gloss Coating type: Water based System: DuSpec NZ_SD09255 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 1st coat: DULUX Weathershield X10 @ 16 m²/L 2nd coat:: DULUX Weathershield X10 @ 16 m²/L</p><p>4.102 EXTERIOR NON FERROUS METAL EXISTING - DOORS, TRIMS AND FRAMES - DECORATIVE PAINT Gloss level: Semi Gloss Coating type: Water based enamel System: DuSpec NZ_SD09145 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX 1 Step Acrylic Primer Sealer & Undercoat @ 16 m²/L 1st coat: DULUX Aquanamel @ 16 m²/L 2nd coat:: DULUX Aquanamel @ 16 m²/L</p><p>4.103 EXTERIOR NON FERROUS EXISTING - LIGHT INDUSTRIAL COATING Gloss level: Gloss Coating type: Solvent based etch primer + solvent based enamel System: DuSpec NZ_SC09300 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Metalshield RFU Etch Primer @ 8 m²/L 1st coat: DULUX Metalshield FD Enamel @ 8.5 m²/L 2nd coat: DULUX Metalshield FD Enamel @ 8.5 m²/L 4.104 INTERIOR NON FERROUS METAL EXISTING - PROTECTIVE COATING Gloss level: Gloss Coating type: Two pack solvent based epoxy + two pack solvent based acrylic polyurethane System: DuSpec NZ_SC09304 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Durebild STE @ 125 microns DFT 1st coat: DULUX Durebild STE @ 125 microns DFT 2nd coat: DULUX Weathermax HBR @ 100 microns DFT</p><p>4.105 INTERIOR NON FERROUS METAL EXISTING - PROTECTIVE COATING - METALLIC FINISH Gloss level: Gloss Coating type: Two pack solvent based epoxy + two pack solvent based metallic polyurethane + two pack solvent based acrylic clear polyurethane System: DuSpec NZ_SC09309 Preparation: DULUX Prep Wash @ 6 m²/L Spot prime: DULUX Durebild STE @ 125 microns DFT 1st coat: DULUX Durebild STE @ 125 microns DFT 2nd coat: DULUX Quantum FX @ 55 microns DFT 3rd coat: DULUX Quantum Clearcoat @ 45 microns DFT</p>