An Introduction to Construction Skills 12927 Hand Tools Assessment Guide
Total Page：16
File Type：pdf, Size：1020Kb
Work Sheet Unit Standard 12927
1. Where would you locate information on safe use, limitations and maintenance of a hand tool?
2. Identify the following tools, how they are used, and how they should be cared for and maintained.
Type of tool:
Use:
Care and maintenance:
Type of tool:
Use:
Care and maintenance:
© BCITO First Edition January 2003 An Introduction to Construction Skills 12927 Hand Tools – Assessment Guide Type of tool:
Use:
Care and maintenance:
Type of tool:
Use.
Care and maintenance:
3. Sketch the following screwdriver points. Draw a plan view looking down on the pointed end:
Square
Pozidriv
Slotted
Phillips
© BCITO First Edition January 2003 2 An Introduction to Construction Skills 12927 Hand Tools – Assessment Guide
4. Name two things you should do to avoid accidents when using hand tools.
5. Why is it important that the cutting edge of cutting tools is maintained in a sharp condition?
6. What is the recommended grinding angle for plane blades and chisels?
7. What is the recommended honing angle for plane blades and chisels?
8. Describe how to check the accuracy of a spirit level.
9. What must you do to a plane before you store it?
10. How should you hand a tool to a fellow worker?
Student Name:______Completion date:______
Assessor:______Pass Date:______
© BCITO First Edition January 2003 3