Section 224713 - Drinking Fountains

Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA

This Product MasterSpec Section is licensed by ARCOM to Zurn Industries, LLC ("Licensee").

This Product MasterSpec Section modifies the original MasterSpec text, and does not include the full content of the original MasterSpec Section.

Revisions made to the original MasterSpec text are made solely by the Licensee and are not endorsed by, or representative of the opinions of, ARCOM or The American Institute of Architects (AIA). Neither AIA nor ARCOM are liable in any way for such revisions or for the use of this Product MasterSpec Section by any end user. A qualified design professional should review and edit the document to suit project requirements.

For more information, contact Zurn Industries, LLC, 1801 Pittsburg Ave., Erie, PA 16502; Phone: (855) ONE ZURN; Fax: (814) 875-1402; Website: www.zurn.com; Email: [email protected].

For information about MasterSpec contact ARCOM at (800) 424-5080 or visit www.MasterSpec.com.

SECTION 224713 - DRINKING FOUNTAINS

To view non-printing Editor's Notes that provide guidance for editing, click on Masterworks/Single-Fil e Formatting/Toggle/Editor's Notes.

To read detailed research, technical information about products and materials, and coordination c hecklists, click on Masterworks/Supporting Information.

Revise this Section by deleting and inserting text to meet Project-specific requirements.

Verify that Section titles referenced in this Section are correct for this Project's Specifications; Section titl es may have changed.

PART 1 - GENERAL

0.1 RELATED DOCUMENTS

Retain or delete this article in all Sections of Project Manual.

A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply to this Section.

0.2 SUMMARY

A. Section includes drinking fountains and related components.

0.3 ACTION SUBMITTALS

A. Product Data: For each type of drinking fountain.

1. Include construction details, material descriptions, dimensions of individual components and profiles, and finishes. 2. Include operating characteristics, and furnished specialties and accessories.

B. LEED Submittals:

Retain "Product Data for Prerequisite WE 1( and Credit WE 3) (, Credit WE 2, and Credit WE 3)" Subpar agraph below for LEED-NC, LEED-CS, and LEED for Schools for fixtures and equipment that consume water.

1. Product Data for Prerequisite WE 1[ and Credit WE 3] [, Credit WE 2, and Credit WE 3]: Documentation indicating flow and water consumption requirements.

0.4 CLOSEOUT SUBMITTALS

A. Maintenance Data: For drinking fountains to include in maintenance manuals.

PART 2 - PRODUCTS

See Editing Instruction No. 1 in the Evaluations for cautions about named manufacturers and products. Fo r an explanation of options and Contractor's product selection procedures, see Section 016000 "Product R equirements."

0.1 DRINKING FOUNTAINS

Copy "Drinking Fountains" Paragraph below and re-edit for each type of drinking fountain required.

Insert number to complete drawing designation. Use these designations on Drawings to identify each drin king fountain.

A. Drinking Fountains : [Concrete] [Painted cast iron or steel], [pedestal] [wheelchair accessible].

1. Concrete Drinking Fountains:

Retain "Manufacturers" Subparagraph and list of manufacturers below to require products from manufact urers listed or a comparable product from other manufacturers.

a. Manufacturers: Subject to compliance with requirements, [provide products by the following] [provide products by one of the following] [available manufacturers offering products that may be incorporated into the Work include, but are not limited to, the following]:

Retain "Basis-of-Design Product" Subparagraph and list of manufacturers below to identify a specific pro duct or a comparable product from manufacturers listed. Retain option and delete insert note if manufactu rer's name and model number are indicated on Drawings. b. Basis-of-Design Product: Subject to compliance with requirements, provide [product indicated on Drawings] or comparable product by one of the following:

1) Belson Outdoors, Inc. 2) Haws Corporation. 3) Petersen Manufacturing Co., Inc. 4) Sanderson Concrete Inc. 5) Stern-Williams Co., Inc. 6) .

2. Cast-Iron or Steel Drinking Fountains:

1) Belson Outdoors, Inc. 2) Halsey Taylor. 3) Haws Corporation. 4) Most Dependable Fountains, Inc. 5) Murdock-Super Secur; a division of Acorn Engineering Company. 6) Stern-Williams Co., Inc. 7) Tri Palm International, LLC. 8) .

Retain "Standards" Subparagraph below for wheelchair-accessible drinking fountains.

3. Standards: Comply with ICC A117.1 and NSF 61.

Retain "with offset to receptor" option in "Pedestal" Subparagraph below for wheelchair-accessible drinki ng fountains. 4. Pedestal: [Rectangular] [Round] , [with offset to receptor] [with side receptor(s)]. 5. Receptor(s):

a. Number: [One] [Two] [Three].

b. Material: [Bronze] [Chrome-plated brass or stainless steel] . c. Shape: [Rectangular] [Round] [Rounded front] . d. Bubbler: One for each receptor, with adjustable stream regulator. e. Drain: Grid type with NPS 1-1/4 (DN 32) tailpiece.

6. Controls: [Foot pedal] [Push bar] [Push button] . 7. Access to Internal Components: Panel in pedestal. 8. Supply Piping: [NPS 3/8 (DN 10)] [NPS 1/2 (DN 15)] with shutoff valve. 9. Drain Piping: [NPS 1-1/4 (DN 32)] [NPS 1-1/2 (DN 40)] minimum trap and waste.

Copy "Drinking Fountains" Paragraph below and re-edit for each type of antifreeze, pedestal drinking fou ntain required.

B. Drinking Fountains : Antifreeze, pedestal.

1. Manufacturers: Subject to compliance with requirements, [provide products by the following] [provide products by one of the following] [available manufacturers offering products that may be incorporated into the Work include, but are not limited to, the following]:

Retain "Basis-of-Design Product" Subparagraph and list of manufacturers below to identify a specific pro duct or a comparable product from manufacturers listed. Retain option and delete insert note if manufactu rer's name and model number are indicated on Drawings. 2. Basis-of-Design Product: Subject to compliance with requirements, provide [product indicated on Drawings] or comparable product by one of the following:

a. Murdock-Super Secur; a division of Acorn Engineering Company. b. .

3. Standard: Comply with NSF 61. 4. Designed to operate without draining into ground. 5. Pedestal: Rectangular, painted cast iron or steel. 6. Receptor: Rectangular, chrome-plated brass or stainless steel with bubbler. 7. Control: Foot pedal with control valve assembly. 8. Supply Fittings: Underground shutoff and flow-control valve assembly. 9. Drain: Grid type with [NPS 1 (DN 25)] [NPS 1-1/4 (DN 32)] [NPS 1-1/2 (DN 40)] minimum waste. 10. Bury Depth, Grade to Valve Components: [36 inches (915 mm)] [48 inches (1220 mm)] [60 inches (1525 mm)] . 11. Supply Piping: [NPS 1/2 (DN 15)] [NPS 3/4 (DN 20)]. 12. Waste Piping: NPS 2 (DN 50) minimum trap and waste.

Copy "Drinking Fountains" Paragraph below and re-edit for each type of wall-mounted drinking fountain required.

C. Drinking Fountains : [Bronze] [Stainless steel] [Vitreous china], wall mounted.

1. Bronze Drinking Fountains:

1) Elkay Manufacturing Co. 2) Filtrine Manufacturing Company. 3) Halsey Taylor. 4) Haws Corporation. 5) .

2. Stainless-Steel Drinking Fountains:

1) Elkay Manufacturing Co. 2) Filtrine Manufacturing Company. 3) Halsey Taylor. 4) Haws Corporation. 5) Murdock-Super Secur; a division of Acorn Engineering Company.

6) Stern-Williams Co., Inc. 7) Tri Palm International, LLC. 8) .

c. Support: ASME A112.6.1M, Type III lavatory carrier.

1) Basis-of-Design Product: [Z1225] [Z1225-BL].

3. Vitreous-China Drinking Fountains:

1) Crane Plumbing, L.L.C. 2) Haws Corporation. 3) Kohler Co. 4) .

4. Standards:

In first subparagraph below, retain first option for stainless-steel drinking fountains and second option for vitreous-china drinking fountains.

a. Comply with [ASME A112.19.3/CSA B45.4] [ASME A112.19.2/CSA B45.1]. b. Comply with NSF 61.

5. Type Receptor: [Slab] [With back] [On horizontal support]. 6. Receptor Shape: [Rectangular] [Round] .

Retain "Back Panel" Subparagraph below only for slab-type and on-horizontal-support-type, brass or stai nless-steel drinking fountains and only if required. Include size if necessary. 7. Back Panel: [Stainless-steel] wall plate behind drinking fountain. 8. Bubblers: [One] [Two] [Three], with adjustable stream regulator, located on deck. 9. Control: [Push button] [Push bar] . 10. Drain: Grid type with NPS 1-1/4 (DN 32) tailpiece. 11. Supply: NPS 3/8 (DN 10) with shutoff valve. 12. Waste Fitting: ASME A112.18.2/CSA B125.2, NPS 1-1/4 (DN 32) chrome-plated brass P-trap and waste. 13. Support: ASME A112.6.1M, Type III lavatory carrier.

Copy "Drinking Fountains" Paragraph below and re-edit for each type of wall-mounted, semirecessed dri nking fountain required.

D. Drinking Fountains : [Stainless steel] [Vitreous china], wall mounted, semirecessed.

1. Stainless-Steel Drinking Fountains:

1) Elkay Manufacturing Co. 2) Filtrine Manufacturing Company. 3) Halsey Taylor. 4) Haws Corporation. 5) Tri Palm International, LLC. 6) .

2. Vitreous-China Drinking Fountains:

1) Crane Plumbing, L.L.C.

2) Kohler Co. 3) .

Retain one of two "Standards" subparagraphs below. In first subparagraph, retain first option for stainless- steel drinking fountains and second option for vitreous-china drinking fountains.

3. Standards: Comply with [ASME A112.19.3/CSA B45.4] [ASME A112.19.2/CSA B45.1]. 4. Standards: Comply with NSF 61. 5. Receptor Shape: Concave with projecting bowl. 6. Bubbler: One, with adjustable stream regulator, located on deck. 7. Control: [Push button] [Push bar] . 8. Drain: Grid type with NPS 1-1/4 (DN 32) tailpiece. 9. Supply: NPS 3/8 (DN 10) with shutoff valve. 10. Waste Fitting: ASME A112.18.2/CSA B125.2, NPS 1-1/4 (DN 32) brass P-trap. 11. Support: Mounting frame or brackets for attaching to wood blocking or substrate.

Copy "Drinking Fountains" Paragraph below and re-edit for each type of stainless-steel, recessed drinking fountain required.

E. Drinking Fountains : Stainless steel, recessed.

1. Manufacturers: Subject to compliance with requirements, [provide products by the following] [provide products by one of the following] [available manufacturers offering products that may be incorporated into the Work include, but are not limited to, the following]:

Retain "Basis-of-Design Product" Subparagraph and list of manufacturers below to identify a specific pro duct or a comparable product from manufacturers listed. Retain option and delete insert note if manufactu rer's name and model number are indicated on Drawings. 2. Basis-of-Design Product: Subject to compliance with requirements, provide [product indicated on Drawings] or comparable product by one of the following:

a. Elkay Manufacturing Co. b. Filtrine Manufacturing Company. c. Halsey Taylor. d. Haws Corporation. e. Tri Palm International, LLC; Oasis Brand. f. Tri Palm International, LLC; Sunroc Brand. g. .

3. Standard: Comply with NSF 61. 4. Receptor Shape: Concave with flush wall flange. 5. Bubbler: One, with adjustable stream regulator, located on deck.

6. Control: [Push button] [Push bar] . 7. Drain: Grid with NPS 1-1/4 (DN 32) minimum horizontal waste and trap, complying with ASME A112.18.2/CSA B125.2. 8. Supply: NPS 3/8 (DN 10) with shutoff valve. 9. Support: Mounting frame or brackets for attaching to substrate.

0.2 SUPPORT FIXTURES

A. Basis-of-Design Product: Subject to compliance with requirements, provide Zurn Plumbing Products Group; Specification Drainage Organization; [Z1224] [Z1231] [Z1231-EZ] [Z1231- EZR] [Z1236] or comparable product by one of the following:

1. Josam Company. 2. MIFAB, Inc. 3. Smith, Jay R. Mfr. Co. 4. Tyler Pipe; Wade Div. 5. Watts Drainage Products. 6. .

B. Description:

Retain one of five subparagraphs below to coordinate with option selected in "Basis-of- Design" Paragraph above.

1. Plate Type System; Lavatory Back Carrier: Z1224. 2. Concealed Arm System, with Alignment Truss Carrier: Z1231. 3. Concealed Arm System with Adjusting Bars Carrier: Z1231-EZ. 4. Concealed Arm System with Adjustable Uprights and Header Plates Carrier: Z1231- EZR. 5. Exposed Arm System Carrier: Z1236.

PART 3 - EXECUTION

0.1 EXAMINATION

A. Examine roughing-in for water-supply and sanitary drainage and vent piping systems to verify actual locations of piping connections before fixture installation.

B. Examine walls and floors for suitable conditions where fixtures will be installed.

C. Proceed with installation only after unsatisfactory conditions have been corrected.

0.2 INSTALLATION

A. Install fixtures level and plumb according to roughing-in drawings. For fixtures indicated for children, install at height required by authorities having jurisdiction.

B. Set pedestal drinking fountains on floor.

C. Install recessed drinking fountains secured to wood blocking in wall construction.

D. Install off-the-floor carrier supports, affixed to building substrate, for wall-mounted fixtures.

E. Install water-supply piping with shutoff valve on supply to each fixture to be connected to domestic-water distribution piping. Use ball or gate valve. Install valves in locations where they can be easily reached for operation. Valves are specified in Section 220523.12 "Ball Valves for Plumbing Piping" and Section 220523.15 "Gate Valves for Plumbing Piping."

F. Install trap and waste piping on drain outlet of each fixture to be connected to sanitary drainage system.

G. Install wall flanges or escutcheons at piping wall penetrations in exposed, finished locations. Use deep-pattern escutcheons where required to conceal protruding fittings. Comply with escutcheon requirements specified in Section 220518 "Escutcheons for Plumbing Piping."

H. Seal joints between fixtures and walls using sanitary-type, one-part, mildew-resistant, silicone sealant. Match sealant color to fixture color. Comply with sealant requirements specified in Section 079200 "Joint Sealants."

0.3 CONNECTIONS

Coordinate piping installations and specialty arrangements with Drawings and with requirements specifie d in piping systems. If Drawings are explicit enough, these requirements may be reduced or omitted.

A. Connect fixtures with water supplies, stops, and risers, and with traps, soil, waste, and vent piping. Use size fittings required to match fixtures.

B. Comply with water piping requirements specified in Section 221116 "Domestic Water Piping."

C. Install ball or gate shutoff valve on water supply to each fixture. Comply with valve requirements specified in Section 220523.12 "Ball Valves for Plumbing Piping" and Section 220523.15 "Gate Valves for Plumbing Piping."

D. Comply with soil and waste piping requirements specified in Section 221316 "Sanitary Waste and Vent Piping."

0.4 ADJUSTING

A. Adjust fixture flow regulators for proper flow and stream height.

0.5 CLEANING

A. After installing fixtures, inspect unit. Remove paint splatters and other spots, dirt, and debris. Repair damaged finish to match original finish.

B. Clean fixtures, on completion of installation, according to manufacturer's written instructions.

C. Provide protective covering for installed fixtures.

D. Do not allow use of fixtures for temporary facilities unless approved in writing by Owner.

END OF SECTION 224713

DRINKING FOUNTAINS 224713 - 11