Drawing 20695 Controls the Basic Design Configuration of This Part

KORRY COMPLETE ASSEMBLY PART NO. 20695-XXXX CHROMALUX SERIES CHROMALUX 428 - 4 POLE SWITCH

SWITCH TYPE 1 (PKH) CONFIGURATION NOTES (SEE SHEET 3) 1. DRAWING 20695 CONTROLS THE BASIC DESIGN MATING CRIMP CONFIGURATION OF THIS PART. SOCKET (FOR POKE M39029/57-354 (SIZE 22) HOME) 2. DRAWING 20695 MUST BE USED IN CONJUNCTION WITH THIS DOCUMENT FOR INSPECTION OF THIS PART. MOUNTING STYLE SINGLE SLEEVE W/CONNECTOR MODULE 3. REFERENCED NOTES, SHEETS AND FIGURES SHOWN ON THIS MOUNTING PANEL DRAWING ARE FROM DRAWING 20695. THICKNESS/RANGE (REF) ASSEMBLY TYPE 428 - STANDARD BASE (1.9")

LAMP CIRCUIT SPLIT COMMON TYPE 6 (SEE SHEET 8)

KORRY BASE ASSEMBLY PART NO. 20695-XXXX SWITCH ACTION ALTERNATE

BASE TYPE FIGURE 1 (.030 DIA.)

SWITCH CIRCUIT TYPE 1 (SEE SHEET 9) JUMPERS YES SWITCH CONTACT MATERIAL / RATING SILVER, 7 AMP KORRY CAP ASSEMBLY PART NO. 20695-XXXX CAP TYPE HIGH EFFICIENCY CAP

LENS CONFIG HORIZONTAL SPLIT - CONFIG. 2 (SEE SHEET 7) SEGMENT A B

LEGEND NOMENCLATURE LEGEND TYPE (TABLE 1) TBD TBD ILLUMINATED COLOR WHITE RED

LAMPS (VOLTAGE) 28V 28V

NOTICE: This document only contains basic marketing information on function or purpose. It does not contain technical data as defined in 15 CFR 772 or 22 CFR 120.10. This document is not subject to U.S. export controls under the EAR or the ITAR

UNLESS DATE (YYYY-MM-DD): OTHERWISE SPECIFIED, ESR NUMBER: DIMENSIONS ARE THIRD ANGLE IN INCHES PROJECTION CUSTOMER:

TOLERANCES ON TITLE 2 PLACE 3 PLACE ANGLES DRAWN BY DATE (YYYY-MM-DD) ±0.030 ±0.005 ±2° INDIVIDUAL INTERPRET DIM AND TOL PER ENGINEER DATE (YYYY-MM-DD) PRODUCT FEATURES ASME Y14.5M-1994 INTERPRET DRAWING PER SIZE CAGE CODE DWG NO REV ASME Y14.100-2004 SEE RELEASE RECORD FOR APPROVALS NO CHANGES MAY BE MADE TO THIS A 81590 20695-XXXX — DRAWING EXCEPT BY ELECTRONIC INPUT TO THE WORD FILE SCALE: NONE SHEET 1 OF 1

File: qr26_IPF_word.dot NOTE: PRINTED COPY OF THIS DOCUMENT MAY NOT BE CONTROLLED. 10/09 File: qr26_IPF_word.dot NOTE: PRINTED COPY OF THIS DOCUMENT MAY NOT BE CONTROLLED. 02/28/08