Kirby Morgan 57 Specifications s2

Kirby Morgan Superlite 27 Specifications

Fiberglass and Carbon Fiber Reinforced Shell The helmet shell is hand laid up glass fiber reinforced thermal setting polyester (fiberglass) with carbon fiber reinforcement at key points for added durability. It is light and highly impact resistant, and provides a heat/cold barrier as well as being an excellent electrical nonconductor. Kirby Morgan has over 50 years experience in composite laminations.

A_Head Cushion The Head Cushion gives the helmet a secure, well balanced feel as well as excellent thermal protection during long work periods.

B_Silicone Oral Nasal The "universal" Silicone Oral Nasal fits the SL 17 & 27 helmets as well as the KMB18 & 28 Band Masks. It is made of a superior silicone material which is hypo-allergenic and has a longer work life than standard latex.

C_Port Weight provides balance, comfort, and an accessory mounting area.

D_Locking Collar Latch System The latch catches consist of two sealed pull pins which are pulled forward to release the neck collar and neck dam locking system. Even when the latches are released, the neck dam maintains a positive seal and will not allow the seal to be broken until the collar actually clears the diver's shoulders, thus preventing any flooding of the helmet.

E_Quick Change Modular Communications System Because the module is easily removed from the helmet, repair or replacement of communications parts is quick and trouble free. It comes in either of two different configurations, male waterproof connector or a bare wire post connection.

F_Externally Adjustable Chin Strap The externally adjustable chin support, along with the adjustable neck pad on the locking collar gives the diver a comfortable, secure fit.

G_Adjustable Neck Pad The adjustable neck pad is made from a scuff resistant elastomer and, in conjunction with the swing catch, provides protection for the bottom of the Helmet.

H_Neck Dam Swing Catch The Swing Catch rotates out of the way to allow the neck dam assembly to be unsealed from the helmet. This simplifies removal of the helmet.

Part No. Description _SuperLite 27 Accessories

__500-040 __SuperLite 27 w/ bare wire posts __510-504 __Neoprene Neck Dam (standard) __500-041 __SuperLite 27 male waterproof conn. __510-500 __Latex Neck Dam (optional) __525-019 __O-Ring Kit __525-100 __Hot Water Shroud Kit __525-309 __Regulator Rebuild Kit __525-120 __Double Exhaust Kit __525-311 __Side Block Rebuild Kit __525-403 __Welding Lens Assembly ______525-333 __Spares Kit, SuperLite 27 __525-400 __Welding Shield Assembly __525-341__ Overseas Spares Kit, SuperLite 27 __525-620 __Regulator Tool Kit w/Pouch __515-023__ Comm. Assembly w/Posts __515-024 __Comm. Assembly w/male wp. conn.SuperLite 27 ___ _Upgrade Kits for earlier SL 27s __525-106 __Swing Catch retrofit kit __ __525-220 __Port Weight Kit __525-119 __Head Cushion upgrade kit __525-210__ Sealed Pull Pin Kit