Rmb(X) Series Rack-Mounting Adaptor Bracket

DIVISION 28 23 23 USA RMB(X) SERIES – RACK-MOUNTING Telephone: 203 796-5300 ADAPTOR BRACKET e-mail: [email protected]; ENGINEERING SPECIFICATIONS Internet URL: www.ComNet.net B. Substitutions: Not Permitted PART 1 - GENERAL C. All fiber optic modules shall be supplied from a 1.01 SUMMARY single manufacturer. A. RACK-MOUNTING ADAPTOR BRACKET 2.02 MANUFACTURED UNITS 1.02 SECTION INCLUDES A. Model Number Descriptions: Reference Table A. RMB(X) Series Rack-Mounting Adaptor Bracket A: Product Number Descriptions 1.03 REFERENCES B. Model Compatibility Chart: Reference Table B: A. Underwriters Laboratory (UL) Product Compatibility Chart B. Underwriters Laboratory Canada (ULC) 2.03 GENERAL SPECIFICATIONS C. European Union Compliance (CE) A. The Rack Mounting Adaptor Brackets shall be a 1.04 SYSTEM DESCRIPTION ComNet model RMB(X). The brackets shall A. Performance Requirements: Provide Rack- allow for the rack mounting of select ComNet Mounting Adaptor Brackets to Rack Mount Managed Switches. The brackets shall be Select Desk Units. designed to attach to the sides of the compatible 1.05 SUBMITTALS equipment and shall require no holes to be A. Product Data: Manufacturer’s printed product drilled or tapped. Adaptor Brackets shall be data sheet for each type of Transmitter/Receiver configured to allow the equipment to mount to specified. the front of an EIA rack without interfering with B. Detail Drawings: Electrical and optical connect any adjoining rack spaces. The module shall drawings. Product mounting template. have an MTBF of >100,000 hours and operate in C. Manufacturer’s Installation and Operating an environment of –40˚ C to +75˚ C and relative Manual: Printed installation and operating humidity between 0% to 95% (non-condensing). information for each type of The module shall be UL and ULC listed and CE Transmitter/Receiver specified. marked.. Housing shall be of all metal D. Warranty: Manufacturer’s Printed Warranty construction. The module shall have a lifetime 1.06 DELIVERY, STORAGE AND HANDLING warranty to reduce system life cycle cost in an A. Deliver materials in unopened factory packaging event of a module failure. with Manufacturer’s bar coding to the job site. 2.04 STATUS INDICATORS B. Inspect product upon delivery to assure that A. Power: N/A specified products have been received. 2.05 ELECTRICAL SPECIFICATIONS C. Store in original packaging in a climate A. N/A controlled environment. Storage Temperature 2.06 MECHANICAL SPECIFICATIONS not to exceed: -40˚ C to +85˚ C A. Rack Space: 1 RU 1.07 PROJECT/SITE CONDITIONS B. Finish: Module shall be constructed of a metal A. Temperature Requirements: Products shall enclosure. Adaptor Brackets shall be constructed operate in an environment with an ambient of anodized aluminum. temperature range of –40˚ C to +75˚ C without C. Weight: <1.0 lbs./0.45kg the assistance of fan-forced cooling. 2.07 ENVIRONMENTAL SPECIFICATIONS B. Humidity Requirements: Products shall operate A. MTBF: >100,000 Hours in an environment with relative humidity of 0% B. Operating Temp: –40˚ C to +75˚ C to 95% (non-condensing). If product is installed C. Storage Temp: -40˚ C to +85˚ C in condensation conditions, unit shall have 2.08 ACCESSORIES conformal coating applied to the printed circuit A. N/A board. PART 3 - EXECUTION 1.08 WARRANTY 3.01 EXAMINATION A. Standard Communication Networks A. Inspect modules before installation. Comprehensive Lifetime Warranty: COMNET B. Modules shall be free of any cosmetic defects or warrants the product to be free of factory defects damage. under manufacture’s Lifetime Warranty as C. Shipping box shall include the module, power submitted under article 1.05 (E) supply and operations manual. PART 2 - PRODUCTS 3.02 PREPARATION 2.01 MANUFACTURER A. Rack Mount Module (19” Rack) A. Acceptable Manufacturer 1. Ensure the card cage is installed in a Communication Networks standard EIA 19” (482.6 mm) rack or wall 3 Corporate Drive Danbury CT 06810 00000 - 1 standoff bracket adequate for the size and 3.04 CLEANING weight of the card cage. A. Follow all instructions for proper use of solvents 3.03 INSTALLATION and adhesives used for termination and splicing. A. General: Locate fiber optic modules as indicated B. At completion of the installation, dispose of all on the approved detail drawings and install fiber scraps properly. module in compliance with the ComNet installation and operations manual.

00000 - 2 Model Description Number RMB1 Single-Module Rack Mount Adaptor Kit with mounting hardware kit, for models with 9.85 inches (250mm) width dimension. RMB2 Single-Module Rack Mount Adaptor Kit with mounting hardware kit, for models with 8.6 inches (217 mm) width dimension. RMB3 Dual-Module Rack Mount Adaptor Kit with mounting hardware kit, for two (2) models with 8.6 inches (217 mm) width dimensions

END OF SECTION

00000 - 3