Malnad College of Engineering, Hassan, Karnataka

MALNAD COLLEGE OF ENGINEERING, HASSAN, KARNATAKA TECHNICAL EDUCATION QUALITY IMPROVEMENT PROGRAMME-II Details of research publications in International refereed Journals (after joining the project till to date) Sl. No. Name of the Faculty Title of the Paper Journal details 2012-13 (38) Electric power components and Dr Vishwanath Hegde On the influence of neighbouring conducting objects on the induced systems (Tayler & Francis) 1 Professor current in simple docon conductors due to nearby lightning strike Vol.40 Issue 14, Oct. 2012 PP 1533 – 1543

International Journal of 2 “Study in sliding mode control for 2nd order system” Dr .G.K .Purushothama Research and Innovation in Professor Computer Engineering “Case study of Hystyresis and PI control as applied to engine 3 ICCEETS – 2012 coolant temperature control”

Tribological studies on AISI 1040 with raw and modified versions of Advances in Tribology , 4 Pongam and Jatropha vegetable oils as lubricants Vol.2012, Article ID 560175 Dr. Y. M.Shashidhar (2012) Associate Professor International Journal of Deep drawing of 304 L Steel Sheet using Vegetable oils as Forming 5 Advancemetns in Research & Lubricants Technology. Vol.1:7,2012, ISSN 2278-7763 (2012) Electric power components and Dr Vishwanath Hegde On the influence of neighbouring conducting objects on the induced systems (Tayler & Francis) 6 Professor current in simple docon conductors due to nearby lightning strike Vol.40 Issue 14, Oct. 2012 PP 1533 – 1543

International Journal of 7 “Study in sliding mode control for 2nd order system” Dr .G.K .Purushothama Research and Innovation in Professor Computer Engineering “Case study of Hystyresis and PI control as applied to engine 8 ICCEETS – 2012 coolant temperature control”

Advances in Tribology , Dr. Y. M.Shashidhar Tribological studies on AISI 1040 with raw and modified versions of 9 Vol.2012, Article ID 560175 Pongam and Jatropha vegetable oils as lubricants Associate Professor (2012)

IJERTISSN: 2278-067X, Volume Dr .Y .Arun Kumar Discrete event simulation for increasing productivity in digital 10 1, issue 10 (June 2012), PP 36- manufacturing Professor 40 11 Dr. Chandrika J Frequent item set mining in transactional streams based on quality International journal of Data Associate Professor control and resource adaptation mining and knowledge management process, Vol. 2, No. 6, November 2012 Sl. No. Name of the Faculty Title of the Paper Journal details IOSR Journal of Engineering Dr. H.S. Mohana (IOSRJEN),ISSN: 2250-3021 12 Professor and Dean (AA) “Computer Aided Diagnosis for the Detection of Lung Nodules” Volume 2, Issue 7 (July 2012), PP 134-136. International Journal of Dr. H.S. Mohana “Machine Vision Based Non-Magnetic Object Detection and Computer Vision and Image 13 Professor and Dean (AA) Removal on Moving Conveyors in Steel Industry through Differential Processing, 2(3), 66-77, July- Techniques” September 2012. Mr. G. Shivakumar "Emotion Recognition Using Finger Tip Temperature: First Step International Journal of 14 Associate Professor towards an Automatic System" Computer and Electrical Engineering vol. 4, no. 3, pp. Advances in Tribology, 15 Shashidhara, Y.M., Jayaram, S.R. Professor Tribological studies on AISI 1040 with raw and modified versions of Vol.2012, article ID 560175, Pongam and Jatropha vegetable oils as lubricants 2012

16 C.V. Venkatesh, Low Cycle Fatigue Behaviour of Al-Mg-Si Alloy AA6061 Processed Advanced Materials Research 17 S. Ganesh Sundara Raman, by Equal Channel Angular Pressing (Volumes 463 - 464) 2012 18 Chakkingal Uday

Shashidhara, Y.M., Jayaram, S.R. Deep drawing of 304L Sheets using Vegetable oils as Forming Advancements in Research and 19 Lubricants Technology Vol. 1:7, 2012, ISSN Professor 2278-7763.

Scientific and Research H.V.Ramakrishna 20 Business Process Reengineering for Indian Rural Health Care Publications, Vol.2, No.5 ISSN Professor Sector using Data Envelopment Analysis Technique, 2250-3153, May 2012 PP. 1-6

Journal of Engineering Science Dr. Srinath M.S 21 & Technology 4[2], 152-158, Associate Professor Simulation of Microwave Heating while Joining of bulk copper 2012

Mr. Sree Rajendra MER,ISSN-2249-6645, Volume- 22 Pressure sensor based event data Recorded, 2 issue-4, July-Aug-2012- Associate Professor IJMER, PP-1972-1976 23 Mr. Prathap M.S Automated Drug Dispensing System Journals Vol-2, Issue, 3 July- Mr. Laxman Naik 2012, IJSCE Dr. B. Yogesha Sl. No. Name of the Faculty Title of the Paper Journal details Vol. 710, pp 253-257, 2012. 24 Dr. S. Pradeep, Microstructural and mechanical characterization of friction stir Sumit Kumar Sharma, processed 5086 aluminum alloy, Mater. Sci. Forum, Vivek Pancholi, Associate Professor Vol. 702-703, pp 348-351, 2012. 25 Influence of friction stir processing parameters on anisotropic behavior of 5086-O aluminum alloy, Mater. Sci. Forum,

Dr. Pradeep Vol. 43, pp. 4311- 4319, 2012. 26 Multipass friction stir processing and its effect on mechanical Associate Professor properties of aluminum alloy 5086, Metall. and Mater. Trans A,

IOSR Journal of Engineering Mr. G. Shivakumar 27 “Computer Aided Diagnosis for the Detection of Lung Nodules” (IOSRJEN),ISSN: 2250-3021 Associate Professor Volume 2, Issue 7 (July 2012),

Dr. Amarendra H. J 28 Associate Professor “Synergy of cavitation and slurry erosion in the slurry pot tester”, Wear, 290-291 (2012) 25-31.

Amarendra. H. J, P. Kalhan, G.P. Chaudhari, S.K. Nath, 29 “Slurry erosion response of heat treated 13Cr-4Ni martensitic Materials Science Forum Vol. S.Kumar, stainless steel” 710 (2012) pp 500-505.

30 Dr. Amarendra H. J, Associate Professor “Effect of deposition parameters & Molybdenum percentage on Advanced Materials Research, Nickel-Molybdenum alloy coatings”, Vol. 585. pp 493-497, 2012.

International Journal of Science “Role of Moulding Water Content on the Strength Properties of Red 31 & Engineering Research Earth treated with Mine tailings”, (IJSER), Vol. 4(5), 47-50 Dr .A.J. Krisihnaiah Associate Professor IOSR Journal of Mechanical and “Effect of Lime on the Index Properties of Black cotton soil and Mine 312 Civil Engineering (IOSRJMCE), tailings mixtures”, Vol.3(4), 01-07 Dr. A .J. Krisihnaiah Research and Reviews: Journal Associate Professor “Effect of Lime on the Hydraulic Conductivity of Red Earth Treated 33 of Engineering and Technology with Mine tailings for the Construction of Earth Dams” (RRJET), Vol.2(3), 265-269 34 Strength Behaviour of Red Earth and Mine tailings Mixture Treated International Journal of Earth with Lime in presence of Sodium chloride” Science and Engineering (IJEE), Vol.6 (5), 1060 -1067

Sl. No. Name of the Faculty Title of the Paper Journal details Mr. B E Yogendra Effect of DEM source and resolution on stream flow prediction and Hydrological process vol.3(4), 35 Associate Professor downscaling by SWAT model in an Indian river basin: 243-261

Emerging Technology & Mr. Sree Rajendra Application of Distributed control system in Automation of process 36 Advanced Engineering Associate Professor indication, Volume – 2, Issue - 6, July -2012 (ISSN-2250-245) Proceedings of IEEE-PES Asia- A model for the Temperature Distribution in Resin Impregnated Pacific Power and Energy Prof. N.S. Jyothi 37 Paper Bushings Engineering Conference, March Associate Professor 27-29, 2012, Shanghai, China.

Proceedings of IEEE-PES Asia- Pacific Power and Energy Prof. N.S. Jyothi Statistical Methods for Accelerated Life Testing with Particular 38 Engineering Conference, March Associate Professor Reference to Resin Impregnated Paper Bushings 27-29, 2012, Shanghai, China.

2013-14 (37) Sl. No. Name of the Faculty Title of the Paper Journal details

Experimental determination of cutting power for turning and material Dr. Y. M.Shashidhar Advances in Tribology, Vol 1 removal rate for drilling of AA 6061-T6 using vegetable oils as 2013, Article ID 362931 (2013) Associate Professor cutting fluid

Dr. H.S. Mohana International Journal of “Object Classification from Estimated Traffic Flux Density Using 2 Professor and Dean (AA) Computer Science and Artificial Discrete Fourier Transform” Intelligence, Mar. 2013, Vol-3, Issue.1. Trans Indian Inst Met DOI Dr. C. V. Venkatesh Characterization of AA6061 Alloy Processed by Equal Channel 3 10.1007/s12666-012-0236-4, Angular Pressing and Subjected to Low Cycle Fatigue Professor 2013

Dr. H.V.Ramakrishna IOSR Journal of Mechanical & 4 Professor Dyad Synthesis of planar Seven-link variable topology mechanism Civil Engineering (IOSR-JMCE) for motion between two dead-centre positions, vol.3, issue 3, pp – 21-29, 2013

5 Dr. Srinath M.S FSP synthesis of seven-link variable topology mechanism for International Journal of Associate Professor function & motion generation, Technology & Research Advances vol.1, pp 32-38, 2013

Shashidhara, Y.M., Jayaram, S.R. Experimental determination of cutting power for turning and material Advances in Tribology Vol.2013, 6 removal rate for drilling of AA 6061-T6 using vegetable oils as Professor article ID 362931. (2013) cutting fluid

Sl. No. Name of the Faculty Title of the Paper Journal details

Dr. H.V.Ramakrishna IOSR Journal of Mechanical & Professor 7 Dyad Synthesis of planar Seven-link variable topology mechanism Civil Engineering (IOSR-JMCE) Dr. Srinath M.S for motion between two dead-centre positions, vol.3, issue 3, pp – 21-29, 2013 Associate Professor

Shashidhara, Y.M., Jayaram, S.R. Experimental determination of cutting power for turning and material Advances in Tribology Vol.2013, 8 removal rate for drilling of AA 6061-T6 using vegetable oils as Professor article ID 362931. (2013) cutting fluid

TM fiat of Theoretical Research 9 Mr. Dushyanth Kumar K.R., G.S.Shiva Shankar., Complete Evolution and Success Factors of Lean Manufacturing and Letters (IJTRL), Vol 3(2), pp.39-43, 2013 International Journal of Machine Mr. G. Shivakumar "Galvanic Skin Response: A Physiological Sensor System for 10 Learning and Computing vol. 3, Associate Professor Affective Computing" no. 1, pp. 31-34, 2013. ISSN: 2010-3700. Dr. S. Pradeep, Sumit Kumar Sharma, Effect of micro structural inhomogenity on super plastic behavior of 11 Vivek Pancholi, multipass friction stir processed aluminum alloy, Mater. Sci. A., Vol. 561, pp. 78-87, 2013. Engg. Associate Professor

Volume-7, Issue -2 , PP121-134, 12 Mr. Dushyanth Kumar K.R., G.S.Shiva Shankar., Effective product Efficiency using advanced manufacturing (2013) Business and system Technology research IJBSR

International Journal of Dr. H.V.Ramakrishna 13 FSP synthesis of seven-link variable topology mechanism for Technology & Research Dr. Srinath M.S function & motion generation, Advances vol.1, pp 32-38, 2013

Amarendra. H. J, P. Kalhan, G.P. Chaudhari, S.K. Nath, 14 “Slurry erosion response of heat treated 13Cr-4Ni martens tic Materials Science Forum Vol. S.Kumar, stainless steel” 710 (2012) pp 500-505. Materials Science Forum Vol. 15 Dr. Amarendra H. J, Associate Professor “Cavitations and slurry erosion of aluminum in the slurry pot tester”, 736, pp 218-222, 2013.

Dr. S.R .Jayaram “Experimental determination of cutting power for turning and 16 material removal rate for drilling of AA 6061-T6 using vegetable Vol.2013, Article ID 362931. Professor oils as cutting fluid”

Sl. No. Name of the Faculty Title of the Paper Journal details Pp 2740 to pp2748, Vol-2, “Super plastic Behaviour of Aluminium Alloy-AA5083” Issue-7, July-2013.

Prof. V.V. Bongale, “Design and Fabrication of Mobile Phone Controlled Four Legged (IJCER) ver. 6, pp 47- 51, Vol. 3, 17 Issue.7, July 2013. Associate Professor Walking Robot”

“Design and Fabrication of Prototype of Automated Smart Car (IJSET) Issue 9, Volume 2 Sept. Parking System using PLC 2013.

Dr. C. V. Venkatesh “Characterization of AA6061 Alloy Processed by Equal Channel Trans IIM, Trans IIM, 2013, 18 Associate Professor Angular Pressing and Subjected to Low Cycle Fatigue”, 66(2), 147-154.

Prof. Lakshman Naik Automation of Alternate Test Bench to Ensure Accurate Testing Vol.2, Issue-7, July 2013 ( ISSN 19 Using PLC & HMJ 2278-0181) Associate Professor

Dr. H.V.Ramakrishna, “Dyad Synthesis of planar Seven-link variable topology mechanism 20 vol.3, issue 3, pp – 21-29, 2013 Professor for motion between two dead-centre positions”,

Dr. Srinath M.S “Dyad Synthesis of planar Seven-link variable topology mechanism 21 for motion between two dead-centre positions”, IOSR Journal of vol.3, issue 3, pp – 21-29, 2013 Associate Professor Mechanical & Civil Engineering (IOSR-JMCE)

Dr. S. Pradeep 22 “Effect of microstructural inhomogenity on superplastic behaviour of Vol. 561, pp. 78-87, 2013 Associate Professor multipass friction stir processed aluminum alloy”,

Dr. Amarendra H. J, “Cavitation and slurry erosion of aluminum in the slurry pot tester”, 23 Vol. 736, pp 218-222, 2013. Associate Professor 24 “Complete Evolution and Success Factors of Lean Manufacturing” Vol 3(2), pp.39-43, 2013. Mr. Dushyanth Kumar K.R Volume-7, Issue -2 , PP121-134, 25 Assistant Professor “Effective product Efficiency using advanced manufacturing Technology (2013)

Prof. M.G Vasundhara System” International Journal of Engineering Research & 26 vol 2 Issue 8 Aug 2013 Assistant Professor Technology,

Prof. Lakshman Naik Vol.2, Issues, August 2013, 27 PLC Based Automatic Racking System Associate Professor (ISSN 2278-0181) International Journal of Dr. H. N. Suresh Studies on Quasi-Z-source based Three-phase isolated DC/DC 28 Emerging Technology and Professor converter for Distributed Power Generation Advanced Engineering vol. 3, issue 7, July 2013, pp.473-477 1. H. N. Suresh, International Journal of Fabrication and Development of Signal Loss Recovery System for Emerging Technology and 2. Mohanalakshmi J. 29 AC Drives Advanced Engineering, vol. 3, 3. Shruthi K. issue 8, August 2013, pp.164- 4. Shruthi T.S. 171. International Journal of An Experimental Investigation on Broken Rotor Bar in Three Phase Emerging Technology and Dr. Vishwanath Hegde 30 Induction Motor by Vibration Signature Analysis using MEMS Advanced Engineering, vol. 3, Professor and HOD Accelerometer Issue 4, pp. 357 - 363 April 2013. 1. Varaprasad N. L. International Journal of Current 2. S. Rajannaa Engineering and Technology Microcontroller Based DC Motor Control With Fuzzy Maximum 31 Mohanalakshmi J. ISSN 2277 – 4106, 2013, 3. Power Point Tracking of PV System 4. Shruthi K Available online 01 October 2013, Vol.3, No.4. 5. T. S. Shruthi

Dr. H S Mohana “Development and Simulation of Poly View Fusion for Enhance Vol 1, Issue 5, May 2013, 32 Professor and Dean Video Denoising Algorithms” Page.165-174 "Galvanic Skin Response: A Physiological Sensor System for 33 Vol. 3, No. 1, pp. 31-34, 2013. Affective Computing," Dr. G Shivakumar Associate Professor “An Improved Artificial Neural Network Based Emotion ISBN 978-81-322-1523-3, No. 34 Classification System for Expressive Facial Images”, 258, Chapter 31, 2013.

35 Mr. H S Murali “A Kalman filter based state parameter estimator for a micro air ISBN 978-81-322-1523-3, No. Assistant Professor Vehicle” 258, Chapter 31, 2013. International Journal of Dr. M .K. Partha 36 Non-linear Convection Advances in Engineering & Professor Technology, Sept- 2013, Page Accepted for publication in Comparative Study on Induced Currents in Steel Reinforced Dr. Vishwanath Hegde American Journal of Electrical 37 Building due to a Nearby Lightning Strike to Ground and a Nearby Professor and HOD and Electronic Engineering, Dec Elevated Object 2013. 2014-15 (72) Sl. No. Name of the Faculty Title of the Paper Journal details IJRET, NCRIET-2014 Volume Prof. Vijaya kumar G Tile Energy Analysis and IGCC Plant Technology to improve the 1 No.03, Special Issue No.03, efficiency and to reduce the Emission in Thermal Power Plant Assistant Professor May 2014, page No.502-509 Dr. H. N. Suresh Emerging Research in Professor Studies on Quasi-Z-Source-Based Isolated DC/DC Converter for Electronics, Computer Science 2 Distributed Power Generation and Technology, Volume 248, 2014, pp 121-130 1 H. N. Suresh International Journal of Current 2 M. E. Tejamurthy Studies on Ultra capacitor Based Energy Storage and Power 3 Engineering and Technology, Conversion System for Three-phase Electric Drives 3 Geetha M. A April 2014, Vol. 4, No. 2. 4 Raghavendraprasad Deshpandey 1. Raghvendraprasad Deshpande International Journal of G. K. Purushothama A Novel Approach In Modeling and Analysis of Two-Phase Multidisciplinary Research and 4 2. 3. M. S. Raviprakasha Symmetrical Induction Machine for Smart Grid Applications Advances in Engineering, Vol. 6, No. II, April 2014, pp. 57-71. International Journal of 1. Kumaraswamy L. Comparative Analysis of PID and Fuzzy PI controller for Speed Multidisciplinary Research and 5 2. G. K. Purushothama Control of DC Motor Advances in Engineering, Vol. 6, No. II, April 2014, pp. 487- 500.

Dr. H S Mohana “Engineering and Technology Education for Sustainable 6 Professor and Dean Development” 4-5 March 2014 at Bangalore. Dr. H S Mohana Era Identification and Recognition of Stone In-scripted Kannada 7 Professor and Dean Characters Using Artificial Neural Networks

A New Level Based Parallel Task Graph Scheduling Method ISTE-ACEEE International Journal in Computer Science, 8 Ms. Uma. B Vol.1, No.1, March 2014 Associate Professor A comparative study and WIMAX and LTE as the mobile enterprise ISBN 978-163173186-0Vol 2: network page no:53-57 Collaborative Adaptive Down-Sampling and Up conversion - An 2014 – International Journal Dr. V. N. Narayana Approach for Image Compression ISSN – 2320-0790 9 Professor ISBN- 978-1-4673-5759-3, Page CADAU – An Approach for Image Compression No: 530-534

International Journal of Scientific Dr. A .J .Krishnaiah Analysis of Strength Behaviour of Lime treated Red earth and Mine 10 and Research Publications, Associate Professor tailing mixtures using X-ray diffraction and SEM Techniques Vol.3 Proceedings of International Hardened Properties of Concretes made with Micro Silica and Journal of Computer Science Alccofine-A Performance Optimization based Comparative Study and Information Technology Research Excellence

Mr. H. S. Narasimhan Experimental Studies on Self Compacting Concrete by Partial Proceedings of International 11 Associate Professor Replacement of Sand by quarry dust, Cement by Rice Husk and Journal of Engineering Research Bagasse Ash & Technology (IJERT)

International Journal of Experimental Studies on Self Compacting Concrete by Partial Engineering Research and Replacement of Cement by Rice Husk and Bagasse Ash. Development, Volume 10, Issue 8 (August 2014), PP.01-09. Intl. Journal of Research in Simulation & Analysis of Low Cost Weedier Dr. Mohan Kumar S Engineering & Technology 12 Professor Recent Innovations in Design & Development of Three row Weedier Engineering and Technology Virtual Design and Simulation of Maize Deshler ASME Journal of Mechanical Design IEEE Transactions on Dr. Mohan Kumar S Design, Simulation and Development of Weedier 13 Automation Science and Professor Engineering Simulation Based design of low cost automation Inter cultivation Emerging Trends in Mechanical Equipment & Materials Engineering

“Automatic Punching Machine: a low cost approach”, Page no. 509-517, ISSN 2250- 14 3234, Volume 4, Number 5, 2014. ISSN 0973-4562 Volume 9, 15 Prof. Vijay Vithal Bongale PLC Based Automatic Powder Coating Machine Controller Associate Professor Number 7 (2014) pp. 755-763

ISSN 2250-3234 Volume 4, 16 “PLC Controlled Low Cost Automatic Packing Machine” Number 7 (2014), pp. 803-811 Volume 2, Issue 5, August- Prof. L Laxmana Naik “Mechanical Properties of Epoxy Based Hybrid Composites 17 September,2014, ISSN: 2091- Associate Professor Reinforced with Sisal/SIC/Glass Fibers” 2730.

Vol.3, Issue 7. (ISSN (e): 2319- 18 “Microcontroller based Automated Irrigation System”, 1813). July-2014. e-ISSN: 2278-1684,p-ISSN: “Investigation on Mechanical Property 106Evaluation of Jute - Glass 2320-334X, Volume 11, Issue 4 19 Fiber Reinforced Polyester” Ver. July- August. 2014, pp. 50- 57. Dr. B .Yogesha Professor ”Study on Mechanical Characteristics of Unidirectional Sisal/Glass Volume 3 Issue 8, August 2014, 20 Fiber Reinforced Polyester Hybrid Composites ” ISSN: 585-588.

“Mechanical Properties of Epoxy Based Hybrid Composites Volume 2, Issue 5, August- 21 Reinforced with Sisal/SIC/Glass Fibers” September,2014, ISSN: 2091- 2730. Review On Comparative Evaluation Of Fiber Reinforced Polymer Volume 2, Issue 5, October 22 Matrix Composites” 2014. Mr. Hareesha. M. “Modification of Abrasive Wear Testing Machine and Testing of ISSN Volume 3, 10th October 23 Associate Professor Materials” International Journal of Science and Research (IJSR) 2014. Page no. 509-517, ISSN 2250- 24 Automatic Punching Machine: a low cost approach”, Prof. Sree Rajendra 3234, Volume 4, Number 5, Associate Professor 2014 25 “Automatic Punching Marching controlled by PLC”,

GSM based Automatic Irrigation Control System for Efficient Use of April 25th 2014,T.John Institute 26 Dr. Srinath M .S. Resources and Crop Planning by using an Android Mobile of Technology. Associate Professor Joining of Inconel-625 Alloy Joint developed through Microwave 27 Energy Volume No.03, Special Issue Mr. Vijaya kumar G Tile “Energy Analysis and IGCC Plant Technology to improve the 28 No.03, page No.502-509, May Assistant Professor efficiency and to reduce the Emission in Thermal Power Plant” 2014. Mr. Vasundhara M G “Study on Mechanical Characteristics of Unidirectional Sisal/Glass Volume 3 Issue 8, August 2014, 29 Assistant Professor Fiber Reinforced Polyester Hybrid Composites”, ISSN: 585-588. Mr. Jeevan T.P “Modification of Abrasive Wear Testing Machine and Testing of 30 Volume 3, 10th October 2014. Assistant Professor Materials” Mr. Sanjay M R “Study on Mechanical Characteristics of Unidirectional Sisal/Glass Volume 3 Issue 8, August 2014, 31 Assistant Professor Fiber Reinforced Polyester Hybrid Composites”, ISSN: 585-588. Sl. No. Name of the Faculty Title of the Paper Journal details

Volume 2, Issue 5, August- “Mechanical Properties of Epoxy Based Hybrid Composites September,2014, ISSN: 2091- Reinforced with Sisal/SIC/Glass Fibers” Mr. Sanjay M R 2730. 32 Assistant Professor “Review On Comparative Evaluation Of Fiber Reinforced Polymer 2014; 4(4): 44-476, October Matrix Composites” 2014 A novel approach in modeling and analysis of vector controlled 33 Dr .M .S. Raviprakasha Professor and Vice Principal symmetrical two-phase induction machine for smart grid Matlab applications Fabrication and Development of Signal Loss Recovery System for AC Drives 34 International Journal Condition Monitoring of a model 500VA transformer

Dr. H. N. Suresh Optimal Placement of Distribution Transformers in Radial International Journal of Smart 39 Professor Distribution System Grid and Clean Energy.,

On the Influence of Steel Geometry on the Induced Currents in IEEE, American Journal of 40 Steel Reinforced Concrete Building due to a Nearby Lightning Strike ElTrans. on Electro Magnetic to Ground Compatibility

Mr. N. A. Ranjan Studying on ultra capacitor based energy storage & power 41 International Journal Assistant Professor conservation system for three-phase

International Journal of Industrial 42 Stone In-scripted Kannada characters Matching using SIFT Electronics and Electrical Engineering Vol.2 Issue 6, June International2014, pp 105-110. Journal of Electronics and Communication 43 Dr. P. C. Srikanth Detection of Human Bladder Cancer Cells Using Image Processing Engineering Research and Professor and HOD Development Vol.4 , Issue 2, IJECERDApril-June Vol.4, 2014, Issue pp 73-82. 2, April- 44 Modeling of Photonic Crystal Ring Resonator Temperature Sensor June 2014. pp 83-88. IJECERD ISSN 2248– 9525 Implementation and Analysis of Multiple Criteria Decision Routing 45 (Print) ISSN 2248 –9533 Algorithm for Wireless Sensor Networks (Online) Vol 4, Number 2, April- June (2014), pp. 28-35. Sl. No. Name of the Faculty Title of the Paper Journal details International Journal of Dr. P.C. Srikanth Electronics and Communication Faulty Node Recovery And Replacement Algorithm For Wireless 46 Professor and HOD Engineering Research and Sensor Network Development (IJECERD), ISSN 2248– 9525 (Print) ISSN 2248 – International Journal of Electronics and Communication Dr. P.C. Srikanth Engineering Research and 47 Professor and HOD Minimum Resource Consumptions Routing For Optical Networks Development (IJECERD) , ISSN 2248– 9525 (Print) ISSN 2248 – 9533 (Online) Volume 4, InternationalNumber 2, April- Journal June of (2014), Dr. P.C. Srikanth Electronics and Communication A Design and Simulation of Optical Pressure Sensor based on 48 Professor and HOD Engineering Research and photonic crystal in Sub-Micron Range Development(Vol.4 , Issue 2, April-June 2014, pp 20-27. International Journal of Dr. P.C. Srikanth Electronics and Communication 49 Professor and HOD MEMS Based Optical Sensor for Salinity Measurement Engineering Research and Development (IJECERD), Vol.4 , Issue 2, April-June 2014, pp 1- International Journal of Dr. P.C. Srikanth Implementation and Analysis of Multiple Criteria Decision Routing Electronics and Communication 50 Professor and HOD Algorithm for Wireless Sensor Network Engineering Research and Development(IJECERD), Vol.4 , Issue 2, April-June 2014, pp 28- Dr. P.C. Srikanth Design and Analysis of Combined Grade Diffusion and Genetic 51 Professor and HOD (IJECERD), Vol.4 , Issue 2, Algorithm for Wireless Sensor Networks April-June 2014, pp 36-44,

An Approach To Design Rectangular Microstrip Pathch Antenna In IJECERD, Vol 4, No 2, April- Mr. Murthi Mahadeva Naik. G S Band By TLM Model June 2014. 52 Associate Professor Automatic Detection Of Retinal Optic Disc By Means Of PCA And IJECERD, Vol 4, No 2, April- Mathematical Morphology June 2014.

Dr. B.R Sujatha ICEECE, EECEMYS-14054- 53 HCCC and SLBC for audio signals Associate Professor 247,Mysore 14 May 2014 54 Dr. B. R. Sujatha RP based optimized image compression technique IJECERD, Vol-4, ISSN 2248- Associate Professor and Dean (LSU) 9533, 2nd June, 2014, pp.56-63. IJECERD, Vol. 4, No.2 55 VDE Radiography Based Tumor Detection In Lungs ISSN2248- 9525(Print),ISSN2248-9533 (Online), June-2014 PP-64-74. International Journal of 56 Title “Analytical modeling of mobile adhoc networks” in Mysore. Engineering and Innovative Technology (IJEIT) March 2013. (IJECERD) , ISSN 2248– 9525 Mrs. Triveni C.L Implementation and Analysis of Multiple Criteria Decision Routing 57 (Print) ISSN 2248 –9533 Assistant Professor Algorithm for Wireless Sensor Networks (Online) Volume 4, Number 2, April- June (2014), pp. 28-35. International Journal of Electronics and Communication Mrs. Triveni C.L. Faulty Node Recovery And Replacement Algorithm For Wireless Engineering Research and 58 Assistant Professor Sensor Network Development (IJECERD), ISSN 2248– 9525 (Print) ISSN 2248 – 9533 (Online) Volume 4, InternationalNumber 2, April- Journal June of (2014), Electronics and Communication Engineering Research and Mrs. Triveni C L Development (IJECERD) , ISSN 59 Minimum Resource Consumptions Routing For Optical Networks Assistant Professor 2248– 9525 (Print) ISSN 2248 – 9533 (Online) Volume 4, Number 2, April- June (2014), pp. 64-72. International Journal of Electronics and Communication Mrs. Triveni C L Design and Analysis of Combined Grade Diffusion and Genetic 60 Engineering Research and Assistant Professor Algorithm for Wireless Sensor Networks Development(IJECERD), Vol.4 , Issue 2, April-June 2014,pp 36- 44. International Journal of Mrs. Indira Bahaddur A Design and Simulation of Optical Pressure Sensor based on Electronics and Communication 61 Assistant Professor photonic crystal in Sub-Micron Range Engineering Research and Development(IJECERD), Vol.4 , Issue 2, April-June 2014,pp 20- Mrs. Indira Bahaddur (IJECERD), Vol.4 , Issue 2, 62 MEMS Based Optical Sensor for Salinity Measurement Assistant Professor April-June 2014, pp 1-4. Ms. Harshitha K Raj International Journal of 63 A survey on Cloud computing Assistant Professor Advanced Research in Computer Science & Software International Journal of Mr. Gururaj H.L Network performance Comparative Analysis of Torns Modified 64 Computer Theory and Assistant Professor Mesh Interconnection with Source Routing Engineering (IJCTE) Mr. Keerthi K .S Gradiene Descent approach with covert base station to secure 65 JAET – 2014 - July Assistant Professor localization in Wireless Sensor Network

Mr. Gururaj H.L Performance Evaluation of High Speed TCP Variants in Dumbbell 66 Assistant Professor IOSR Journal of Computer Network Assistant Professor Engineering International Journal of Dr .M.K .Ravishankar Comparative Study of Performance of Four-Stroke Two Wheeler Engineering Research & 67 Associate Professor and HOD using Ethanol-Gasoline and Butanol Gasoline Blends Technology (IJERT) (ISSN: 2278-0181), Volume 04, Issue 03, March 2015, Page No. 266 - International Journal of Science Dr .M.K .Ravishankar Comparative Study of Performance of Two Wheeler: Using Ethanol- & Research (IJSR) (ISSN: 68 Associate Professor and HOD Gasoline Blends 2319-7064), Volume 03, Issue 10, October 2014, Page No. International Journal of Dr .M.K .Ravishankar Engineering Research & 69 Design and fabrication of electromechanical parking brake system Associate Professor and HOD Technology (IJERT) (ISSN: 2278-0181), Volume 03, Issue 10, October 2014, Page No. 230 A comparative study and WIMAX and LTE as the mobile enterprise Mr. A.M. Vinod 2014 – International Journal 70 network Assistant Professor ISSN – 2320-0790 Published in International online Mr. M.E. Tejamurthy Studies on Ultra-Capacitor Based Energy Storage And Power journal ”International Journal of 71 Associate Professor Conversion System For Three-Phase Electric Drives. Current Engineering and Technology ISSN 2277 – 4106 Journal citation – IJCET VOL 4, Published at International Journal of Current Engineering Mr. Raghavendra Prasad Deshapande Paper titled “Studies on Ultra-Capacitor Based Energy Storage and 72 and Technology ISSN 2277 – Assistant Professor Power Conversion system for Three-Phase Electric Drives”. 4106 (IJCET Vol. 4, No.2, April 2014. Exergy analysis and IGCC plant Technology to improve the International Journal of Prof. Vijaykumar G. Tile efficiency and to reduce the emission in thermal power plant-a Research in Engineering and 72 review Technology, 3 and 2321-7308, 2014 2015-16 (37)

Sl. No. Name of the Faculty Title of the Paper Journal details International Journal of “Extraction of Stone In-scripted Kannada Characters Using Sift 1 Electronics & Communication Algorithm Based Image Mosaic Technology , International Journal of Electrical 2 Dr. H S Mohana “Finger Print Recognition using Scale Invariant Feature Transform”. and Electronic Engineering & Professor and Dean (AA) Telecommunications “Template Matching Method for Recognition of Stone In scripted International Journal of Kannada 3 Computer and Electronics Characters of Different Time Frames based on Correlation Research Analysis”. International Journal of Industrial Dr. H S Mohana 4 “Stone In scripted Kannada Characters Matching using SIFT”, Electronics and Electrical Professor and Dean (AA) Engineering International Journal of Dr. H S Mohana “A Simple Iris Detection Algorithm Based on the Cross-Correlation Electronics and Communication 5 Professor and Dean (AA) and Feature Transform Matching Method” Technology

International Journal of Dr. H S Mohana “Era Identification and Recognition of Stone In-scripted Kannada 6 Engineering Research & Professor and Dean (AA) Characters Using Artificial Neural Networks”, Technology (IJERT) International Journal of Electrical 7 “Finger Print Recognition using Scale Invariant Feature Transform”. and Electronic Engineering & Telecommunications International Journal of Industrial 8 “Stone In scripted Kannada Characters Matching using SIFT”, Electronics and Electrical Dr. G Shivakumar Engineering Associate Professor and HOD International Journal of “Era Identification and Recognition of Stone In-scripted Kannada 9 Engineering Research & Characters Using Artificial Neural Networks”, Technology (IJERT) International Journal of 10 “Android Based Autonomous Intelligent Robot for Border Security” Innovative Science , Engineering International& Technology Journal of “Era Identification and Recognition of Stone In-scripted Kannada 11 Engineering Research & Characters Using Artificial Neural Networks”, Mr. C M Naveen Kumar Technology (IJERT) Assistant Professor International Journal of 12 “Android Based Autonomous Intelligent Robot for Border Security” Innovative Science , Engineering & Technology Sl. No. Name of the Faculty Title of the Paper Journal details International Journal of Dr. Y. Arunkumar Manufacturing Simulation for determining the Influence of Process 13 Research in Engineering & Professor Parameters on quality of forgings Technology

Kalavathi G K surface Roughness effect in an infinitely long journal bearing with 14 Elsevier- Tribology international Assistant Professor heterogeneous slip / no slip surface. Journal.

International Journal of Mrs. Mohan Lakshmi J Titled International Journal of Emerging Technology & Advanced 15 Emerging Technology and Assistant Professor Engineering (ISSN2250 – 2459). Advanced Engineering (IJETAE) International Journal of Mr. Shashidhara H V 16 Low Rate Denial of Service (LDoS) attack – A Survey”. Emerging Technology and Associate Professor Advanced engineering refereed journal (IJETAE) “Investigation on Performance of SI Engine to Improve the Dr. B. Yogesha Combustion Characteristics by Using Pre-heated fuel” 17 Professor Volume 4 Issue 2, February 2015, ISSN (Online): 2319-7064. Dr. B. Yogesha “Study on Mechanical Properties of Natural - Glass Fibre 18 Professor Reinforced Polymer Hybrid Composites: A Review” International Journal Of Science Mr. A. N .Basavaraju Investigation On Performance Of SI Engine to Improve the and Research (IJSR) Volume 19 Combustion Characteristics by Using Pre-Heated fuel Associate Professor 4,Issue 2, February 2015

Performance of Skew or Rectangular Smart Patches for Active International Journal of Mr. Rudragouda Kanasogi Mechanics and Materials in 20 Damping of Nonlinear Vibrations of Skew Doubly Curved Laminated Assistant Professor Composite Shells Design,(Springer) DOI: 10.1007/s10999-014-9290- x International Journal of Design and wall temperature optimization of combustor for low 21 Engineering Research and calorific values gases application using numerical analysis Technology, 3 and 2278, 2015. Prof. Vijaykumar G. Tile International Journal of Analysis of combustion chamber for low energy fuels application 22 Engineering Research and using CFD Technology, 3 and 2278, 2015 Recent Developments of a compressed air technology in the International Journal of 23 vehicles-a review Engineering Research and Technology, 2015 Sl. No. Name of the Faculty Title of the Paper Journal details Prof. L Laxmana Naik., Arduino controller based smart stick for visually challenged using IJERGS, Vol - 3, Issue 6, 2015 24 Zigbee communiction International Journal for trends 25 “Process Control of An Automated Lift Pumping Station”, in Engineering & Technology (IJTET), Ref: IJTET1301005, ISSN:2349-9303, Automatic Path Detection and Navigation of Vehicle Based on IJIRT, Volume 2, Issue 1, ISSN: 26 Image Processing Technique”, 2349-6002. 2015 Sree Rajendra “Automated Shopping and Billing With Product Inventory IJIRT, e-Journal, Volume 2, 27 Management System”, Issue 2, ISSN 2349-6002. 2015

Automatic path detection and navigation of vehicle based on image IJIRT, Volume 2,Issue 1, ISSN: 28 processing technique”, 2349-6002, 2015

World Journal of Engineering Prof. L Laxmana Naik., 29 Design and Fabrication of Ginger Harvesting Machine and Technology, 3, 320-338. 2015 Prof. L Laxmana Naik., Natural Resources, 7, 108-114, 30 Applications of Natural Fibers and Its Composites: An Overview 2016 International Journal of Review on Mechanical Properties of Sisal and Banana Reinforced 31 Prof. L Laxmana Naik., Engineering Research and Composites General Science, ISSN 2091- International2730, 176 - 179, Journal 2015 for Recent 32 Sree Rajendra “Automated Orbital Pulse TIG Welding”, Trends in Engineering & Research, ISSN2455-1457, Impact Factor 3.344, 2016 M. S. Raviprakasha, "A survey on Methods of Evaluation of Distribution Systems Wit International Journal of 33 B. K. Keshavan, Distributed generation", Engineering Research & Vishalini Divakr, technology, Vol. 5, Issue 8, pp. 220-226, Aug. 2016. Maruthi. G. S. and Vishwanath Hegde “Application of MEMS Accelerometer for Detection and Diagnosis of IEEE Sensors Journal, Vol. 16, Multiple Faults in the Roller Element Bearings of Three Phase No. 1, pp. 145-152, January 34 Induction Motor”, 2016. (Impact factor 1.762)

Journal of Minerals and Dr. B Yogesha Studies on Mechanical Properties of Jute/E-Glass Fiber Reinforced 35 Materials Characterization and Epoxy Hybrid Composites Engineering, 4, 15-25, 2016 Sl. No. Name of the Faculty Title of the Paper Journal details 36 Dr. B Yogesha Applications of Natural Fibers and Its Composites: An Overview Natural Resources, 7, 108-114, 2016. Study on Water Absorption Behaviour of Jute and Kenaf Fabric International Journal of 37 Reinforced Epoxy Composites: Hybridization Effect of E-Glass Composite Materials, 6 (2), Fabric pp.55-62. 2016 Published at International Published Paper in Journal Paper titled “Hybrid Journal of Computer compression Using DWT-DCT & Huffman Encoding 38 Bharath K N Science and Mobile Techniques for Biomedical Image and Video Computing (A monthly Applications”. journal of computer science &Information Sl.No. Name of the Faculty Title of the Paper Journal details

2016-17 (2)

American Journal of Materials Physical and Water Absorption Behaviour of Sisal Glass Fiber Science 2016, 6(4): 91-94 1 L. Laxmana Naik, K. Gopalakrishna, B. Yogesha Reinforced Polymer based Composites DOI:105923/j.materials.2016060 4.02 International Conference on Advance Materials and Advance Materials and Manufacturing Applications 2 Dr .Amarendra. H.J Manufacturing Applications (IconAMMA’ 16) (IconAMMA’ 16) During on 15th-16th July 2016 Details of research publications in National refereed Journals since joining TEQIP-II project (for the period 2012-2017) Sl.No. Name of the Faculty Department Title of the Paper Journal details 2012-13 (2) Dr. K. P. Ravikumar Statistical Analysis and IUP Journal of operation 1 Automobile Engineering Associate Professor Reliability Estimation of IPM management No.1, Feb. 2013 PP 7-20 Mr. Srinath. M .S, Machinability aspects of IJMEMS, 5[2], 123127, 2012 2 Mechanical Engineering Associate Professor Aluminum alloy on CNC Machine 2014-15 (3) Mr. H.V. Shashidhara Survey on Robust RED ISBN 978-163173186-0 Vol 2: 1 Associate Professor & HOD Algorithm to counter Low-Rate page no:53-57 Denial-of-Service Mr. Tejonidhi M R Parallel merge sort based ISBN- 978-1-4673-5759-3, Page 2 Assistant Professor M.C.A performance evaluation and No: 530-534 comparison of MPI and PVM Tejonidhi M R Parallel merge sort based ISBN- 978-1-4673-5759-3, Page 3 performance evaluation and No: 530-534 comparison of MPI and PVM Sl.No. Name of the Faculty Department Title of the Paper Journal details 2015-16 (4) Prof. H.V. Shashidhara “Low rate Denial of Service ISSN 2250–2459, Vol 4, Issue 6 1 MCA (LDoS) attack – A Survey”, ISSN 2250–2459, Vol 4, Issue Solar6, June energy: 2014 review of potential Indian journal of scientific green & clean energy for coastal research, 0976-2876, 2016. Measurementand offshore applications of Indian journal of scientific 2 Prof. Vijaykumar G. Tile Mechanical Engineering thermochemical properties of research, 0976-2876, 2016. Asome review metal of thermalhydrides-titanium energy Indian journal of scientific storage technologies and control research, 0976-2876, 2016. Studiesapproaches on Mechanical for solar cooling JMES 7(9) (2016) 3179-3192, 3 M.R.Sanjay Mechanical Engineering Properties of Banana/E-Glass ISSN: 2028-2508 M.R.Sanjay, ExperimentalFabrics Reinforced Investigation Polyester on Journal of Materials A& 4 G.R. Arpitha, Mechanical Engineering Mechanical Properties of Engineering Structures 3 (2016) L.Laxmana Naik, K.Gopalakrishna, Hemp/E-Glass Fabric 117-128, 2016.

Details of Research papers presented in International Conferences held in India by faculty members Sl. No Name of the Faculty Designation & Paper Title Conference details Department 2012-13 (7) Assistant Professor An International Conference on Current Trends in “A New Highly Secure and Efficient Electronics and Engineering & Management (ICCTEM 2012) In 1 Ms. Triveni Friend Based Routing Algorithm for Communication VVCE, Mysore at 12-14 July 2012. Wireless Sensor Networks”. Engineering Title “stability and Tribological studies on environment friendly vegetable International conference on Industrial Tribology Associate Professor based oils and evaluation of deep 2 Prof. Y M Shahidhara organized by Tribology Society of India and Indian Automobile Engineering drawing of AA 5083 sheets using green Oil Corporation Ltd. During 9th Dec 2012 at PUNE lubricants-pongammia pinnata and jatropha curcass”. Associate Professor “Automatic Rectification of Perspective (ICERECT-12) held at PESCE, Mandya on 21 & 3 Ms Geetha Kiran Computer Science and Distortion from a Single Image Using 22nd DEC 2012 Engineering Plane Homography”. Enabling collaborative technologies for 4 effective e-learning within and outside ISTE Convention at PESIT, 2012 class rooms Research and Development Scenario in First Conclave of VTU Autonomous Colleges at 5 Autonomous Engineering Colleges PESIT, Bangalore, 2012 Professor Dr. S.Mohan Kumar Bioengineering for Customized International Conference of Aeronautical and Mechanical Engineering 6 Orthodontic Applications – Implant, Mechanical Engineering (ICAME12) at Bangkok, Bracket & Dental Vibrator 2012 Scope and Application of Collaborative International Conference of Aeronautical and 7 Tools and Digital Manufacturing in Mechanical Engineering (ICAME12) at Bangkok Dentistry 2013-14 (4) Assistant Professor Titled “voip based embedded system An International conference on Information Electronics and 1 Ms. Triveni design for communication Technology, Electronics & communication on March Communication applications 30-31 2013 held at Bangalore. Engineering Mr. Dushyanth Kumar An International Conference on Advanced Materials, Assistant Professor ”Application of lean concepts to 2 K R Manufacturing, Management & Thermal Sciences Mechanical Engineering supply chain management: review” (AMMMT-2013) at SIT, Tumkur from 3 & 4th may 2013. International Conference on VLSI, communications, Associate Professor “An Improved Artificial Neural advanced Devices, Signals & systems and networking Mr. G Shiva Kumar Electronics and Network Based Emotion 3 (VCASAN-2013) at BNMIT, Bangalore from 17-20th P A Vijaya Instrumentation and Classification System for Expressive July 13. Engineering Facial Images”. Designation & Sl. No Name of the Faculty Paper Title Conference details Department 4 Dr. Vishwanath Hegde Professor “Mathematical Analysis of At the IEEE International conference on “Condition Electrical and Electronics Unbalanced Magnetic Pull and Assessment Techniques in Electrical Systems” Engineering Detection of Mixed Air gap scheduled to be held during 6 – 8th December 2013 at Eccentricity in Induction Motor by Vibration Analysis using MEMS Kolkata. Accelerometer”. 2014-15 (26) Both Publication and Oral Presentation in the Associate Professor International Conference of Signal and Image 1 Ms. Geetha Kiran A Computer Science and “V2 Walk through a Stitched Image”. Processing (ICSIP’14) held at BNMIT, Bangalore Engineering during January 08-10 2014

“Fourth International Conference on Computer Ms. Uma B Associate Professor Title “Multi DAG scheduling on Science, Engineering and Applications (CCSEA-2014) 2 Mr. Venugopal Information Science and Cluster of Processors” organized at VelTech Dr. RR & Dr. SR Technical Chakravarthy Engineering University, Chennai, India on March 7 & 8, 2014.

Paper titled “Studies on Ultra- Assistant Professor and International conference on Power Electronics and Mr. Raghavendra Capacitor Based Energy Storage and 3 Research Scholar Drives organized by Department of E & E Engineering, Prasad Deshapande Power Conversion system for Three- E & E Engineering NMAMIT. Nitte on 10 & 11th April 2014 Phase Electric Drives”. Presented in a conference “IEEE 4th International Associate Professor Titled “A Hybrid Task scheduler for Conference on Advances in Computing and 4 Ms. Uma B Information Science and DAG Applications on A Cluster of Communications (ACC – 2014) held at Rajagiri School Engineering Processors of Engineering and Technology (RSET), Kochi, India during 27 – 29th August 2014.

“Numerical Analysis of Internal One day International Conference on “Innovations and Assistant Professor 5 Mr. Vijayakumar Tile combustion Engine for Producer Gas Emerging Trends in Mechanical Engineering” by Mechanical Engineering Application with Moving Mesh Department of Mechanical Engineering, Nagarjuna Approach Using CFD”. College of Engineering and Technology Bangalore in association with Visveswaraya Technological “ Assistant Professor Wall Temperature Analysis of University, Ashrae South Indian Chapter & The Indian 6 Mr. Raghavendra Rao th Mechanical Engineering Combustor for Producer gas Institute of Metals during 13 June 2014. application using CFD”. International Conference on Advances in Computing, Associate Professor Titled “Automatic hump detection and Communications and Informatics for publication and 7 Ms. Geetha Kiran Computer Science and 3D view generation from a single oral presentation at GCET, Greater Noida during 24 – Engineering Road image”. 27th Sept. 2014. Titled “Experimental and CFD International conference on Materials, Mechanics and Assistant Professor 8 Mr. Sanjay M R simulation of Producer Gas Management held at College of Engineering, Mechanical Engineering Carburetor” Trivandrum during 17 – 19th December 2014. Designation & Sl. No Name of the Faculty Paper Title Conference details Department 9 Mr. Sree Rajendra Titled “Simulation and Analysis of 23rd International Conference on Processing and Mr. Y Arun Kumar Associate Professor Process Parameters in Closed Die Fabrication of Advanced Materials PFAM-XXIII at Mr. Srinath M S Mechanical Department Forging” Indian Institute of Technology, Roorkee, India during Harshavani M D 05 to 07th December 2014. (Student) Associate Professor Titled “Design of Self-Compensated Electronics and 10 Mr. C S Suresh Babu Non-Contract type Capacitive Sensor Instrumentation and for Liquid level control with enhanced Engineering sensitivity – A novel 23rd International Conference on Processing and Titled “Development and Micro Fabrication of Advanced Materials PFAM-XXIII at Associate Professor structural Characterizations of Indian Institute of Technology, Roorkee, India during 11 Mr. Srinath M S Mechanical Engineering Microwave Cladding on High Speed 05 to 07th December 2014. Steel (SS-304)”. Associate Professor Titled “Optimization of Process 12 Mr. Arun Kumar Y Industrial Production and Parameters in High Pressure die Engineering Casting using Simulation” Assistant Professor Titled “Enhanced Authentication 1st International Conference on Contemporary 13 Mr. Gururaj H L Computer Science and Technique for Next Generation Computing and Informatics (IC31-2014) at SJCE, Engineering 3GPP Networks”. Mysore from 27 – 29th November 2014. Dr. Vishwanath Hegde “Techno-economic Reasons for 6th IEEE Power India International Conference 2014, at K Paramesha Professor Construction of electrical Substations Delhi Technological University, Delhi, India during 5 – 14 Karnataka Electricity E & E Engineering on Step-like Ground Surface and 7th December 2014. Regulatory Related Open Issues”. Commission 23rd International Conference on “Processing and “Effect of Heat Treatment on Dr. Amarendra H J Professor Fabrication of Advanced Materials (PFAM 2014) to be 15 Mechanical Properties of 16Cr-5Ni- Mechanical Engineering held at IIT, Roorkee during 5 – 7th December 2014. Mo Martensitic Stainless Steel.” International Conference on “Energy, Environment, “Analysis of Strength Behavior of Materials and Safety (Organized by Cochin University Associate Professor Lime treated Red earth and Mine 16 Dr. A J Krishnaiah Science and Technology Cochin during 10 – 12th Civil Engineering tailings mixtures using X-ray December 2014 diffraction and SEM Techniques”.

“CFD Analysis of Internal International Conference on Emerging Technologies in Mr. Vijayakumar G Assistant Professor Combustion RB-33 Kirlosker Engine Mechanical Sciences by Malla Reddy College of 17 Tiley Mechanical Engineering for Producer Gas and Low Energy Engineering and Technology during 26 – 27th Fuel Application” December 2014.

International conference on Theoretical, Applied, Mr. Rudragowda Assistant Professor “Active Control of Smart Skew Fuzzy 18 Computational and Experimental Mechanics by IIT, Kanasogi Automobile Engineering Fiber reinforced Composite” Kharagpur during 29 – 31st December 2014. Designation & Sl. No Name of the Faculty Paper Title Conference details Department 19 Mr. C S Suresh Babu Associate Professor “Design of a low cost Signal International conference on Circuits, Communication, Electronics and Conditioning Circuit for Self- Control and Computing – 14C2014 at M S Ramaiah Instrumentation Compensated Non Contact Institute of Technology, Bangalore during 21-22 Capacitive Type Multi Threshold November 2014. Engineering Liquid Level Sensor”. “Preliminary Investigation on Bearing Professor and Head International Conference on “Advances in Electronics, Fault Analysis in Three Phase 20 Dr. Vishwanath Hegde Electrical and Electronics Computers and Communication” at Induction Motor by MEMS Engineering BMS, Bangalore during 10 & 11th October 2014. Accelerometer”. Experimental and CFD simulation of 2nd International Conference on Materials Mechanics B Yogesha Assistant Professor 21 Producer Gas Carburetor and Management 17-19 Dec 2014 at College of Mechanical Engineering Engineering, Trivandrum, Kerala, India Development and micro structural characterization of microwave 22 Twenty Third International Conference on PFAM, 2014 cladding on high speed steel [SS- 304] Professor Dr. M.S.Srinath Optimization of process parameters Mechanical Engineering 23 in high pressure die casting using Twenty Third International Conference on PFAM, 2014 simulation Simulation and analysis of process 24 Twenty Third International Conference on PFAM, 2014 parameters in closed die forging 2nd International conference on Manufacturing Super plasticity and Super plastic B Yogesha Assistant Professor engineering and Technology for Manufacturing Growth 25 Tensile Behaviour of AA5083 Mechanical Engineering (METMG2014), January 20-21, , Miami, State of Florida, USA. “ Numerical Analysis of Internal International Conference on NCET, Bangalore, June Assistant Professor Combustion Engine for producer gas 2014 26 Mr. Raghavendra Rao Mechanical Engineering application with moving mesh approach using CFD” 2015-16 (20) “International Conference on Mechanical and “Performance of SI Engine to Manufacturing Engineering (ICMME-2015) organized Associate Professor Improve the Combustion by Department of Mechanical Engineering, Sri 1 Mr. A N Basavaraju Automobile Engineering Characteristics by Using Methanol Chandrasekharendra Saraswathi Viswa blended Petrol. Mahavidyalaya, Kanchipuram, T N during 2 & 3rd April 2015. First International Conference on Power, Circuit and “Designs and Implementations of an Information Technologies organized at Rajarajeshwari Mr. C M Assistant Professor 2 Efficient Level Set Segmentation and College of Engineering, Bangalore during 27 & 28th Chandrashekar E & I Engineering Classification for Brain MR Image”. April 2015.

Sl. No Name of the Faculty Designation & Paper Title Conference details AssistantDepartment Professor international conference on 3 Mr. Keerthi D S Electronics & "Transformations in engineering international conference on, 13/04/2015, Bangalore Communication education (ICTIEE-2015) “An Efficient Switching TCP (STCP) 2015 IEEE International Advance Computing 4 Approach To Avoid Congestion In Conference (IACC-2015) at BMS College of Assistant Professor Ad-Hoc Networks”. Engineering, Bangalore during 12 – 13th June 2015. Mr. Gururaj H L Computer Science and International conference on Engineering "Emerging research electronics, 5 2015 at Mandya computer science and technology ICERCT-2015 at PES International Conference on Mechanical and Performance of SI Engine to Improve Manufacturing Engineering (ICMME), 2-3 April 2015 at 6 the Combustion Characteristics by Sri Chandrasekharendra Saraswathi Viswa Using Methanol blended petrol Mahavidyalaya, Kanchipuram, Tamil Nadu, India- 631561, 2015. Study on Tensile and Dry Sliding 5th Nirma University International Conference on 7 B Yogesha Assistant Professor Wear Behavior of Epoxy Based Fiber Engineering, 26 - 28 November, Ahmedabad, Gujarat, Mechanical Engineering Reinforced Composites India. 2015 Study on Flexural and Impact Second International Conference on Materials and 8 Properties of Epoxy Based Fiber Manufacturing Technology (ICMMT), 3 – 4 December Reinforced Composites 2015, VVIT, Bangalore, India. 2015 Mechanical Properties Evaluation of Second International Conference on Materials and 9 Jute/E-Glass Fiber Reinforced Epoxy Manufacturing Technology (ICMMT) 3 – 4 December Composites 2015, VVIT, Bangalore, India. 2015 ”Study on Mechanical Properties of International Conference on Materials Processing and Assistant Professor Natural – Glass Fibre Reinforced 10 Mr. Sanjay M R Characterization held at Mechanical Engineering Polymer Hybrid Composites: A (GRIET), Hyderabad,. during 14 & 15th March 2015. Review”. Rajanna, S. and Saini, Mechanical Engineering “Development of optimal integrated 111, 803-817. (2016), R. P. renewable energy model with 11 battery storage for a remote Indian area ”, Energy, Rajanna, S. and Saini, Mechanical Engineering “ Employing demand side ”, Renewable Energy, 99, 1161-1180. 2016) R.P. management for selection of 12 suitable scenario-wise isolated integrated renewal energy models in an Indian remote rural area Mechanical Engineering " GA based Optimal Modeling of 6th IEEE International Conference on Power Systems, Rajanna, S. and Saini, Integrated Renewable Energy (ICPS), IIT, Delhi, India. 13 R.P. (2016). System for Electrification of a Remote Rural Area",

Designation & Sl. No Name of the Faculty Paper Title Conference details Department Rajanna, S. and Saini, Mechanical Engineering “ Optimal modeling of an Integrated First international conference on Power Electronics R. P Renewable Energy System with Intelligent Control and energy system (ICPEICES) 14 Battery storage for off grid 2016,DTU,Delhi,India Electrification of remote rural area”. Rajanna, S. and Saini, “ Selection of Suitable Strategy with First international conference on Power Electronics, R.P. peak load shifting based DSM of an Intelligent Control and energy system (ICPEICES) 15 Mechanical Engineering Integrated Renewable Energy 2016,DTU,Delhi,India. System for a remote region”, International Conference, Professor 1st International Conference on 16 Dr. YOGESHA Faculty of Engineering of the University of Porto, Mech. Dept. Materials Design & Applications 2016 Portugal, 30-06-2016 to 01-07-2016 M SHASHANK Research Scholar Application of x-ray diffraction on thin IIT, HYDRABAD, 4th to 9th July 2016 17 LINGAPPA Mech. Dept. Films & Bulk Materials Assistant Professor Application of x-ray diffraction on thin IIT, HYDRABAD, 4th to 9th July 2016 18 MADHU K S Mech. Dept. Films & Bulk Materials Rajanna, S. and Saini, Mechanical Engineering “ Modeling of Integrated Renewable Renewable Energy, 90,175-187. (2016), 19 R.P. Energy System for Electrification of a Remote Area in India”, Wireless information Networking Group, Assistant Professor OPEN SOURCE NETWORK Dept. of Computer Science & Engineering National 20 GURURAJ H L C S EXPERIMENTATION Institute of Technology Karnataka Surathkal, P.O. Srinivasanagar, Mangalore, 6thto 8th July 2016 2016-17 (5) International Conference, M R Sanjaya*, B Yogeshaa Research Scholar International Conference on "Department of Mech. Eng. MCE, Visvesvaraya 1 SANJAY M R Mech. Dept. Technologically Advanced Materials Technological University, Belagavi, University of Delhi, Delhi. 7th to 11th November 2016 Assistant Professor ATME College of Engineer, Mysore. 14th to 19th July 2 YASHAS J "VLSI Design Using CADENCE" E & C 2016 Assistant Professor International Conference, Kings College of Engineering 3 Sunitha R ICETETS-2016 C S Punalkulam, 23/02/2016 to 27/02/2016. Assistant Professor International Conference, Kings College of Engineering 4 Kavyasri M N ICETETS-2016 C S Punalkulam, 23/02/2016 to 27/02/2016. Lean Supply chain performance International Conference on Advanced Materials, Dushyanth Kumar K R 5 Mechanical Engineering metrics for the better manufacturing Manufacturing Management & Thermal Sciences Asst. Proff. process (AMMMT-2016) on September 23td & 24th 2016

Details of Research papers presented in National Conferences held in India by faculty members Designation & Sl. No Name of the Faculty Paper Title Conference details Department 2013-14 (25) Assistant Professor Title “Novel Defense Mechanism Electronics and . At Vivekananda college of engineering for women, 1 Ms. Indira Bhaddur Against Data Flooding Attacks In Ad Communication TIRUCHANAGODE, TN.during 4-6 July 2013. Hoc Network Engineering Organized by Indian Geotechnical Conference Mr. Krishnaiah A J Paper Title “Consolidation Behavior Associate Professor (Geotechnical Advances and Novel Geomechanical 2 Ramesh H N of Black Cotton Soil and Mine Civil Engineering Applications (GANGA) at Indian Institute of Shilpa Shet S Tailings Mixtures Treated With Lime”. Technology, Roorkee from December 22-24, 2013 Performance evaluation of secured 3 Mr. A.M. Vinod cooperative routing protocol in 2014- National Conference M.C.A Assistant Professor cognitive radio ad-hoc networks Heuristics based optimal filtering of 4 2014- National Conference malicious traffic Dr. G .K. Comparative Analysis of PID and Electrical and Electronics National Conference on Electrical & Electronics Engg., 5 Purushothama Fuzzy PI Controller for Speed Engineering Professor Control DC Motor, of Multidisplinary Performance evaluation of secured 6 Mr. Tejonidhi M R cooperative routing protocol in 2014- National Conference Assistant Professor cognitive radio ad-hoc networks Heuristics based optimal filtering of 7 2014- National Conference malicious traffic Performance evaluation of secured 2014- National Conference 8 cooperative routing protocol in M.C.A A.M. Vinod cognitive radio ad-hoc networks Heuristics based optimal filtering of 2014- National Conference 9 malicious traffic Tejonidhi M R Performance evaluation of secured 2014- National Conference 10 cooperative routing protocol in cognitive radio ad-hoc networks Tejonidhi M R Heuristics based optimal filtering of 2014- National Conference 11 malicious traffic Comparative Study on Induced Currents in Steel Reinforced Building Dr. Vishwavantha Electricals & Electronics National Conference on Electrical & Electronics Engg., 12 due to a Nearby Lightning Strike to Hegde Proff. & HOD Engineering Ground and a Nearby elevated Object Designation & Sl. No Name of the Faculty Paper Title Conference details Department Dr. K.Manjunath Civil Engineering Elastic Module of Cement Mortars Professor and HOD with Granular Blast Furnace Slag 13 2014- National Conference as Partial Replacement to Natural Sand 14 Separation of organic based oil and 2014- National Conference grease from restaurant wastewater using a horizontal flow batch research in Engineering and Technology, Computer Science & Performance Evaluation of High Dr. Ramesh B 15 Engineering Speed TCP Variants in Dumbbell 2014- National Conference Professor Network Dr. Ramesh B Computer Science & Emergency Response System in 16 2014- National Conference Professor Engineering Mobile Networks. Studies on Cup Profile Thickness 17 variation of Deep Drawn AA 6061 National Tribology Conference(NTC-14), 2014 Sheet using Green Lubricants Wear studies on Nylon 66 blended 18 Professor National Tribology Conference(NTC-14), 2014 Dr. S.R.Jayaram with MoS2 and Graphite using SEM Mechanical Engineering Statistical and Regression Analysis of Cutting Force and Surface 19 National Tribology Conference(NTC-14), 2014 Roughness under Vegetable Based Cutting Fluids on Turning AISI 304L Mr. C S Suresh Babu Paper Titled “Design on Fringe Organized by National Conference on Zen & Tao Premila Manohar Associate Professor Capacitance based Low cost Dual organized by Department of E & E Engineering, M. S. 20 (received Best Instrumentation Technology mode sensor for Pick and Place Ramaiah Institute of Technology, B’lore during January Research Paper Robot hand – A Novel Approach”. 07 – 09, 2014. award) Title “Engineering and Technology Dean (AA)& Professor, Presented in Indian Sustainability Congress 2014 21 Dr. H S Mohana Education for sustainable Instrumentation Technology during 4 -5th March 2014. Development” Presented Research paper in National Level Technical Symposium organized by K S Rangaswamy College of Assistant Professor A survey on color Image 22 C.M. Naveen Kumar Technology, Tiruchengode, Tamil Nadu. Paper Titled Instrumentation Technology Enhancement Techniques’” “A survey on color Image Enhancement Techniques’” during 13th February 2014. Presented Research Paper in National Conference on “Emerging Trends in Communication and Biomedical Assistant Professor Design of Independent Information Engineering (NCECB-2014) organized by Department 23 Mr. Adarsh D Electronics and Transmission System in WSN Using of Telecommunication Engineering and Medical Communication Community Co-ordination Electronics Engineering by SSIT, Tumkur during 9th & 10th May 2014. Designation & Sl. No Name of the Faculty Paper Title Conference details Department Titled “Energy analysis and IGCC National Conference on Recent Innovations in Plant Technology to improve the Engineering and Technology – 2014 (NCRIET – 2014), Mr. Vijayakumar G Assistant Professor 24 Efficiency and to reduce the by ECE, CSE and Mechanical Departments, Tiley Mechanical Engineering Emission in Thermal Power Plant – A Beemanna Khandre Institute of Technology Bhalki held Review. on 3&4 May 2014 Assistant Professor and “Modeling of Hybrid Microgrid for National Conference on Development in the Domain of Mr. Raghavendra 25 Research Scholar AC/DC Applications in Context to Electrical Engineering at SSIT, Tumkur during 10 & Prasad Deshpande E & E Engineering Smart Grid”. 11th July 2014. 2014-15 (11) Titled “Study Tensile Property Oral Presentation in National Conference on Advanced Evaluation of Jute – Glass Fiber Assistant Professor in Materials Science held at Coimbatore Institute of 1 Mr. Sanjay M R Reinforced Polyester”. Mechanical Engineering technology, Coimbatore, TN during 26 & 27th September 2014. National Tribology Conference (NTC-2014) Organized “Experimental Investigation of by Department of Mechanical Engineering, PES Associate Professor Epoxidised Pongam Methyl Ester as 2 Dr. Y M Shashidhara University, Bangalore scheduled during 15 – 17th Automobile Engineering Engine Lubricant for Four Stroke December 2014. Spark Ignition Engine Operation”. Registration fee: 5000/- Dr. S R Jayaram Professor, “Wear studies on Nylon – 66 blended 3 Mechanical Engineering with MOSX and graphite using SEM”. National Tribology Conference (NTC-14) organized by “Statistical and Regression Analysis P.E.S. University Bangalore and Tribology Society of Mr. Jeevan T P Assistant Professor th 4 of Cutting Fluids on Turning AISI India (TSI) during 15 – 17 December 2014. Mechanical Engineering 304L”. “Role of Moulding Water Content on Indian Geotechnical Conference-2014 by Indian the Strength Behaviour of Red Earth Geotechnical Society, Kakinada Chapter at University Associate Professor 5 Dr. A J Krishnaiah and Mine Tailings Mixtures Treated College of Engineering, Kakinada, Jawaharlal Nehru Civil Engineering with Lime in Presence of Sodium Technological University, A.P. during 18 – 20th Hydroxide”. December 2014. Optimization Of Robotic Arc Welding National at the cogNIEscience10th -11th May at NIE 6 Process By Eliminating Plc Mysore. Automation Of Alternator Test Bench conference on Advanced Materials, Manufacturing, 7 Using Siemens S7-300 Management and Thermal sciences, held 3rd and 4th B Yogesha Assistant Professor May at SIT, Tumkur. Mechanical Engineering Study on Tensile Property Evaluation National conference on, Advancement in Materials of Jute – Glass fiber reinforced Science (AMS 2014), Coimbatore Institute of 8 Polyester Technology (CIT ), TamilNadhu, September 26th & 27th Designation & Sl. No Name of the Faculty Paper Title Conference details Department Statistical and Regression Analysis Professor of Cutting Force and Surface 9 Prof. T.P. Jeevan National Tribology Conference(NTC-14), 2014 Mechanical Engineering Roughness under Vegetable Based Cutting Fluids on Turning AISI 304L 10 Mr. Gururaj H L Assistant Professor Short term Certified Course on Department of Computer Science and Engineering, Computer Science and “Pattern Analysis and Information National Institute of Technology, Goa, Farmagudi, Ponda, Goa at NIT, Goa during 30th June to 4th July Engineering Security”. 2014. Registration fee: 6000/- Jointly organized by Department of Management One day state level conference on studies, Maharani Lakshmi Ammanni college for “Empower Youth – empower Nation Mrs. Sumana Assistant Professor Women, Malleshwaram, Bangalore and Disha Value 11 through value Initiatives Jayaprakash Civil Engineering based Initatives on 12th February 2014 at Dr. K N V (Broad Area of Training– Human Sastry Memorial Hall, Maharani Lakshmi Ammanni resource – value education College for Women, Bangalore. 2015-16 (11) Era Identification and Recognition of 2nd National Conference on Innovation in Computing Stone In-scripted Kannada and Communication Technology 1 C M Naveen Kumar E & I Engineering Characters Using Artificial Neural Networks

“Role of molding water content on Indian Geotechnical Conference, December 18-20, the Strength Behaviour of Red earth Kakanada, India 2 and Mine tailings Mixtures treated with Lime in presence of Sodium Dr. A.J. Krishnaiah hydroxide” Associate Professor Civil Engineering Scanning Electron Microscopic 50th Indian Geotechnical Conference 17th-19th Investigations of Lime Treated Black December 2015 3 Cotton Soil and Mine tailings Mixture

Study on Along Wind Response of Proceedings of the 2nd National Conference on Mr. H.S. Narashimhan Tall Chimneys and its Effect on Systems, Energy & Environment (NCSEE '14). 4 Associate Professor Civil Engineering Foundation Behaviour in Reducing Horizontal Displacement Modeling of Hybrid Microgrid for MATLAB Electrical and Electronics AC/DC Applications in Context to 5 Dr. M S Raviprakash Engineering Smart Grid

Designation & Sl. No Name of the Faculty Paper Title Conference details Department Fault Diagnosis of VSI fed Induction National Conference on Electrical & Electronics Engg., 6 Dr. G K Purushothama Electrical and Electronics Motor Drive using Fuzzy Logic Engineering Approach, Proceedings 7 Mr. Raghavendra Rao Assistant Professor “Design and Wall temperature National Conference on “Emerging Research Areas in Mechanical Engineering optimization of combustor for low Mechanical Engineering at (REVA Institute of calorific value gases applications Technology and Management, Bangalore during 27 – using Numerical Analysis 28th March 2015.and the Paper will be published in Assistant Professor International Journal of Engineering Research and “Analysis of Combustion Chamber 8 Mr. Vijayakumar G Tile Mechanical Engineering Technology for Low Energy Fuels Applications Study on Mechanical Properties of B Yogesha Assistant Professor Natural - Glass Fibre Reinforced 9 Elsevier, Materials Today: Proceedings, 2015 Mechanical Engineering Polymer Hybrid Composites: A Review Mathematical Modeling & Simulation SVNIT, Surat, Gujarat. 11th to 15th July 2016 Assistant Professor 10 MADHU P for Researchers, Engineers & Mech. Dept. Scientists (MMSFRES) "Melting of tin using muffle furnace & Amrita Vishwa Vidyapeetham, Bangalore. 14th to 16th Professor 11 Dr. SRINATH M S microwave energy & its July Mech. Dept. Characterization" 2016

Details of faculty travelled abroad for various purpose under TEQIP-II for the academic year 2012 – 15 under the head R & D

Sl. No Name of the Institution & Name and Designation of Purpose Duration of visit (from…To…..) No. of State persons who visited abroad of Visit Days 9th international conference on DR. C. V. Venkatesh, Professor in Presente 01 16 to 21st September 2012 6 days fatigue Damage of Structural Mechanical Engineering d a Materials held at Hyannis, MA, Presenteresearch d a research 1st International Conference on paper in DR. M S Kallappa, Professor and 02 Concrete Sustainability (ICCS an 27 to 29th May 2013 3 days HoD, Civil Engineering 13) held at Toshi Centre Tokyo. Internatio nal conferenc e. 03 3rd International conference on Prof. Vishwanath Hegde, Presente 11 to13th October 2013 3 days Smart grid and Clean Energy Professor in E & E Engineering d a Technologies (ICGSCE-2013) research paper in an Internatio held at Kuala Lumpur, Malaysia. nal conferenc e. Presente d a An International Conference At research Mr. Dushyanth Kumar K. R. organized by International paper in Associate Professor, Mechanical 04 Conference on Applied an 2nd to 04th October 2013 3 days Engineering. Business & Economics (ICAB Internatio -13) held at New York, USA. nal conferenc e. An International Conference Dr. Amarendra Presente 05 organized by The Minerals, Associate Professor, Mechanical d a 27 to 31st October 2013 5 days Metals & Materials Society at Engineering. research Montreal, Quebec, Canada. Presentepaper in d a research An International Conference Dr. Srinath M. S. paper in organized by The Minerals, Associate Professor, Mechanical 06 an 27 to 31st October 2013 5 days Metals & Materials Society at Engineering. Internatio Montreal, Quebec, Canada. nal conferenc e. To present a 2nd International Conference on research Manufacturing Engg. and Dr. B. Yogesha, paper in 07 Technology for Manufacturing Associate Professor, Mechanical an 20 & 21st January, 2014. 2 days Growth(METMG2014) at Miami, Engineering. Internatio State of Florida, USA nal conferenc e. 08 2nd International Conference on Dr. Pradeep S. To 20 & 21st January, 2014. 2 days Manufacturing Engineering and Associate Professor, Mechanical present a Technology for Manufacturing Engineering. research Growth (METMG2014) at Miami, paper in State of Florida, USA. an Internatio nal conferenc e. To 9th “Asia Pacific International present a Conference on Lightning” (APL- research 2015” organized by Institute of Dr. Vishwanath Hegde, Professor paper in 09 Electrical Installation Engineers & Head, Department of E&E an 23 - 27th June 2015 7 days of Japan & Japan Lightning Engineering Internatio Protection System Industrial nal Association at Nagoya, Japan. conferenc e. To present a International Conference on research Dr. Geetha Kiran Advances in Computing, Control paper in Professor & Head 10 and Networking (ACCN-2015) to an 28-29, August 2015 4 days Department of Information be held in Bangkok during 28- Internatio Science & Engineering 29, August 2015. nal conferenc e. To present a International Conference, research Faculty of Engineering of the Dr. YOGESHA paper in University of Porto, Portugal, 1st 30-06-2016 to 11 Professor an 2 days International Conference on 01-07-2016 Mech. Dept. Internatio Materials Design & Applications nal 2016. conferenc e.

Details of Research publications in International/National Conferences by UG/PG students held in India Sl. No. Student Name Paper Title Conference Title, Venue and Date 2012-13 (09) Chethan P Krishna Attended National level technical civil Titled “Restrengthening of 01 [email protected] symposium at NIRMAAN-12 BMSCE, Structures Against Corrosion” m Bangalore during 09 - 10th Nov 2012. National Conference on Recent Advances in “Manet Based Disaster Electronics and Communication Engineering 02 Ashwini B O Management Module Using – (NCRAECE-13) Organized by RNS Networks Simulator (NS2)”. Institute of Technology, Bangalore held on May 03rd 2013. International Conference held at Santhosh H P The Influence Of Masonry Infill On 03 Jawaharlal Nehru University, New Delhi – 5 The Base Isolated Structure & 6TH June 2013. Santhosh H P Seimic Base Isolation Of ARc National Conference at SVSCE, Coimbatore 04 Framed Structure On 24.04.2013 Titled “A Comparative Study of Yashas 3rd National Conference on RCCIT-13 at MS 05 Routing Protocols and Routing Engg. college ,Bangalore ON 29TH April 13. Metrics in Wireless Mesh Networks” Attended International conference on Nethashree N R “Automation of alternator test Bench 06 Advanced Material, Manufacturing and using Siemens S7 -300” Management Sciences at SIT, 3 – 4th May 13 Has attended the State Level Technical Fest organized by Civil Engg. Association Vikram and Tharanath 07 of S.T.J. Institute of Technology at Ranebennur on 19th April 2013 For the Event Salyam “CAD MASTERS”. Mr. Devaraju T S At International Conference on Advances in K Rama Raju Engineering and Technology – 2013 At Paper Titled “Analysis of Water 08 M Shyam Kumar MGR Educational and Research Institute Tanks Subjected to Seismic Loads”. M S Kalappa University, Chennai, Tamil Nadu, India Nagesh R Iyer during 5 – 6April 2013 2 days National Conference on Advances in “Multipath Routing for Distributed 09 Santhosh Kumar K B Computer Applications (NCACA-13) at SSIT, E & C Networks”. Tumkur on 16 & 17th May 2013. Sl. No. Student Name Paper Title Conference Title, Venue and Date 2013-14 ( Titled “Design and simulation of National Conference on CRT – 2013 by High Convergence Multistage 1 Raghu S SDMIT, Ujjire, D.K DIST. On 27 -28th Sep. Algorithms for Mobile 2013. Communication” National Conference on Recent Advances in Paper Titled “Design & Simulation of Electrical & Electronics Engineering 2 Karunakara G S Adaptive Filtering Algorithms for (NCRAEEE-2013) Sponsored by VTU, Active Noise Cancellation”. Belgaum at University BDT College of Engineering, Davanagere On June 17 – 18, 2013. International Conference on Information & Paper Titled “Image Denoising 3 Revanna B R Communication Engineering (ICICE-13) at E & C Using Patch Based Wiener Filter”. Dr. AIT, Bangalore during 28 – 29th June 2013 Shrishail Bhat Paper titled “BER & PAPR At National Conference on Advances in 4 Dr. B R Sujatha Performance Comparison of SC- Computer Applications (NCACA – 2013) on E & C Kiran V Shanghag FDMA with OFDMA”. May 16 – 17th 2013. At SSIT, Tumkur. Titled “Design and simulation of High Convergence Multistage National Conference at SIT, Tumkur on 29th 5 Raghu S Algorithms for Mobile & 30th August 2013. Communication” Project demo on “Blind person National Level Technical Fest conducted in 6 Sachin Raj S Assisting Device”. BCE, Shravanabelagola, on 9th may 2013. 2 days National Conference on Advances in “A New Data Hiding Method Using 7 Puneeth Kumar G B Computer Applications (NCACA-13) at SSIT, Adaptive Pixel Pair Matching” Tumkur on 16 & 17th May 2013. “Design and Implementation of At National Conference on Advances in Efficient Route Discovery Algorithm Computer Applications on May 16 – 17th 8 Kishore P E & C with the aim of Increasing Network 2013., Sri Siddhartha Institute of Technology, Lifetime in MANET”. Tumkur. At International Conference on Multimedia processing, communication and Information “A Robust Image Steganographic 9 Divya V N Technology” Conducted by Jawaharlal Nehru E & C Technique”. National College of Engineering, Shimoga during 19 – 21st December 2013. “Social Exclusion of Women, National Level Conference At Mangala 10 Ms. Sushma Sheshadri Disabled and other Vulnerable Gangothri, Mangalore University, Karnataka Groups”. during 06th & 07th February 2014.

Sl. No. Student Name Paper Title Conference Title, Venue and Date

“A Cooperative Diversity Based At National Level Technical Symposium, at 11 Ms. Sushma Sheshadri Handoff System”. SIT Tumkur, held on 22/02/2014. 12 Pramod Shetty “Tire Pyrolysis Oil as a Lubricant”. At Tribology Society of India Announces P Samantha “ASIATRIB – 2014” at Jaypee Palace Hotel & P Banerjee, convention Centre, Agra, India during 17 – T. Kuila 20 February 2014. N C Murmu “”Era Identification and Recognition At 2nd National Conference on “Innovation in of Stone In-scripted Kannada Computing and Communication Technology” 13 Rajith Kumar B K E & C characters Using Artificial Neural Organized by Department of CS & Networks”. Engineering during 21st March 2014. An Annual Technical Symposium “Elephant Detectors Using ‘MECHANICA-14, conducted by Mechanical 14 B Nishanth Prabhu Infrasound Recording System”. Engineering Association, IIT, Madras during 21st to 23rd March 2014. An Annual Technical Symposium “Thermo Electric Generators in ‘MECHANICA-14, conducted by Mechanical 15 Aditya M Internal combustion Engines Using Engineering Association, IIT, Madras during Graphene”. 21st to 23rd March 2014. An International conference on Electrical, “Stone Inscripted Kannada Electronics and Computer Engineering 16 Navya K E & C Characters matching Using SIFT”. organized by Asian Society for Academic Research (IRAJ-14) during 05th April , 2014

Sushma Sheshadri “Design of a Virtual-Instrumentation A National Level Technical Symposium 17 System for a Machining process”. TECHZONE 2014 at JNUCE, Shimoga during 7-9th March 2014.

Niranjan Dasar A Study on “Link Weight An International conference on Emerging 18 Triveni C L Performance Analysis in an Intra- Trends in Engineering and Technology by E & C T Srinivas domain Networks”. TECHNORETE on 27th April 2014. Sl. No. Student Name Paper Title Conference Title, Venue and Date An International conference on Emerging “Design and analysis of Trends in Engineering and Technology Combined Grade Diffusion and 19 Rashmi T S (ICET-2014) Organized by TECHNORETE at E & C Genetic Algorithm for Wireless Hotel Pai Vaibhav, Bengaluru on 27th April Sensor Network” 2014. An International conference on Emerging “Implementation and Analysis of Trends in Engineering and Technology Multiple Criteria Decision Routing 20 Shashank S Bhagwat (ICET-2014) Organized by TECHNORETE at E & C Algorithm for Wireless Sensor Hotel Pai Vaibhav, Bengaluru on 27th April Network”. 2014. “Design and Simulation of Optical Rajeshwari S An International conference on Emerging 21 Pressure Sensor based on Photonic E & C Trends in Engineering and Technology Crystal in Sub-Micron Range’. (ICET-2014) Organized by TECHNORETE at th Shruthimala N S “MEMS Based Optical Sensor for Hotel Pai Vaibhav, Bengaluru on 06 April 22 E & C Salinity Measurement”. 2014.

An International conference on Emerging “An Approach to Design a Devaraja Naik R L Trends in Engineering and Technology 23 Rectangular Microstrip Patch E & C (ICET-2014) Organized by TECHNORETE Antenna In S Band by TLM model” Bengaluru on 26th & 27th April 2014.

Participated in 6th National Conference on SDRINA: Secured and Reliable Recent Trends in Electronics and Data Routing Approach for In- 24 Ajey Kumar Communication Engineering organized at E & C Network Aggregation in Wireless SJB Institute of Technology on 10th May Sensor Networks. 2014. Published in International Journal of “Implementation of Modula 2n + 1 Electronics and Communication Technology 25 Uday J E & C Adder and Multiplier” (Cosmic Journal) volume 5.2, Issue 2, April- June 2014. Participated in National conference on “A Research on Cocoa Pod Husk Recent Innovations in Engineering and Activated Carbon for Textile 26 Chethana Krishna P Technology – 2014 organized by, Industrial Wastewater Colour Bheemanna Khandre Institute of Removal”. Technology, Bhalki, On 3 & 4 May 2014. Sl. No. Student Name Paper Title Conference Title, Venue and Date 27 Pooja N “Implementation of VANET routing Participated in International Conference on algorithm for vehicular traffic Electrical, Electronics and Computer information” Engineering ICEECE – Mysore organized by IRAJ Research Forum in association with Asian Society for Academic Research held at Komfort Suites, No. 66, 66A, Vivekananda Road, Yadavagiri, Mysore on 10th May 2014. Participated in International Conference on Electrical, Electronics and Computer “Real time Implementation of 28 Usha M Engineering (ASAR-ICEECE-2014) Optical flow switching”. organized by ASAR – Mysore Chapter, India Mysore on 10th May 2014.

Published in International Journal of “Extraction of Stone in-scripted Electronics and Communication Technology 29 Rajith Kumar BK Kannada Characters Using Sift E & C (IJECT) (Cosmic Journal) volume 5.09, Issue Algorithm Based Image Mosaic”. 2, April-June 2014 date 30th April 2014.

“Design and analysis of Microstrip Participated in 7th IETE Conference on RF & patch antenna (MPA) by TLM model Wireless “Icon RFW” Organized by HKBK 30 Devaraja Naik R L E & C using MATLAB as well as EM College of Engineering, Bangalore on 08 – Simulator for Wireless application”. 10th May 2014. Participated in (ASAR-ICEECE-2014) “Design and Implementation of Multi organized by Asian Society for Academic 31 Devikarani H S Carrier CDMA for Wireless Research in association with IRAJ Research Communication Systems Forum Mysore on 14th May 2014. Sl. No. Student Name Paper Title Conference Title, Venue and Date “PLC Controlled Low Cost 42 Shashank Lingappa th Automatic Packing Machine” Participated in an 4 International Conference on “Advances in Mechanical, “PLC Based Sensor Operated Material, Manufacturing, Automobile, 43 Vikash V Obstacle Detection Carriage Aeronautical Engineering and Applied Vehicle”. Mecha Physics” (AMAEAP-2014) Organized by Engin “Automatic Punching Machine – a 44 Arun S “Krishi Sanskriti” at Jawaharlal Nehru Low cost approach University, New Delhi during 7 & 8th June “PLC Based Automatic Powder 45 Darshan P 2014. Coating Machine Controller”. A Simple Iris Detection Algorithm Published in International Journal on 46 Navya K Based on the Cross Correlation and Electronics and Communication Technology E & C Feature Transform Matching Method (IJECT) Volume 5.2, April – June 2014. 47 Tanveerkhan Guttal Automatic Detection of Retinal Optic Participated in International Conference on Disk by Means of PCA and Recent Advances in Electronics, Computer Science and Information Technology (ICECSIT-14) organized by EFERP-India at Mathematical Morphology”. Pai Vaibhav Bangalore during 08th June, 2014 Participated in International Conference on Recent Advances in Electronics, Computer “Detection of Human Bladder Science and Information Technology 48 Taresh B M Cancer cells Using Image (ICECSIT-14) organized by EFERP-India at Processing”. Pai Vaibhav Bangalore during 08st June, 2014 Sharanbasappa “RP Based Optimized Image International Conference on Current 49 Chattarji Compressing Technique”. Advances in Electronics, Computer Science, Software and Information Technology “VDE Radiography Based Tumor (ICECSSIT – 2014) Organized by ISER-India 50 Arun Kumar V Detection in Lungs”. at Hotel Pai Vaibhav, bengaluru on 22nd June 2014. An Improved DTC for Three – Level 2nd International conference “Current Trends 51 Nagesh C Inverter – Fed IM Sensorless Drive in Engineering & Technology sponsored by IEEE Organized by Akshaya college of Interactive segmentation for Engineering & Technology at Akshaya 52 Navya K Character extraction in Stone college of Engineering and Technology, Inscriptions. Coimbatore during 8th July 2014. Sl. No. Student Name Paper Title Conference Title, Venue and Date Era Identification and Recognition of International Conference on Control Ganga and Hoysala Phase Kannada 54 Rajith Kumar B K Instrumentation communication and Stone Inscriptions Characters using Computational Technologies organized by Advance Recognition Algorithm the Noorul Islam centre for Higher Education, Implementation of 32 – bit Area – Noorul Islam University, Kumaracoil, Uday J Efficient Hybrid Modula 2n + 1 Adder 55 Thuckalay, TN, during 10 & 11th July 2014. and Multipler.

National Conference on Developments in the Shwetha H S Refiner Disc Movement Control Domain of Electrical Engineering” (NCDDEE- 56 Using RMC Motion Controller. 14) by Sri Siddhartha Institute of Technology, Tumkur, during 10 & 11th July 2014. 57 Shwetha K S Node Replication Detection Using National Conference on Current advances in XED EDD and Reliable Route. Electronics, Computer Science, Software and Information Technology (ICECSSIT- 2014) Organized by ISER-India at Hotel Pai Vaibhav, Bangalore on 22nd June 2014. National Conference on “Emerging Research 58 Anand N K Evaluation of Erosion Behaviour of Areas in Mechanical Engineering organized Ni based cladding developed by Department of Mechanical Engineering, th 59 Kiran Kumar through Microwave Energy Reva University Bangalore during 27 & 28 March 2015. MisbhaMaheen Cloud Computing using Wireless MCE Hassan, 2016 62 Nida Afreen sensor technology for agricultural Sushma J A Bigapplication data for security intelligence MCE Hassan, 2016 64 Gagana N Bhushan KainatZeba

65 LekhaUmesh Chandra Data Analytics MCE Hassan, 2016 Geetha K N Underwater wireless communication MCE Hassan, 2016 66 Soundarya M networks Pradyumna Chandra Three factor Authentication MCE Hassan, 2016 67 Pooja Chandran Sl. No. Student Name Paper Title Conference Title, Venue and Date Niranjan L C Water assessment of Hassan MCE Hassan, 2016 Suhas A A District 68 Nikhil Kulkarni Sachin J Vijay Kumar L Improving performance of an engine MCE Hassan, 2016 69 Shiv Kumar H L block by varying cooling fluids Umesh M Solar energy Application: coastal & MCE Hassan, 2016 70 Preethi B S offshore 71 Eranna T Shower Irrigation MCE Hassan, 2016 Sridhara R Nanotechnology in medical field MCE Hassan, BIT Bangalore, 2016 72 Guhan S B.S.Shreya Next Generation Satellite Navigation MCE, Hassan, 2016 73 S.M Srikanth Pradyumna System in India Thrimurthi M Comparative analysis of different MCE, Hassan, 2016 74 Adithya B A deployment techniques in Wireless Sensor Network Suraj S R Computer Vision-based Adaptive MCE, Hassan, 2016 75 Usha N Cruise Control System MEMS Accelerometer Based MCE HASSAN, 2016 76 Nonspecific-User Hand Gesture AdvancedRecognition Low Power CMOS MCE HASSAN, 2016 77 Pramoda N V Design to reducepower consumption in CMOS Circuit for VLSIDesign