* How to Reset EDVR Password

1. When you set up OSD Menu in Local, In case of lost password.

Please just click on PLUS10 key in the window that password will be input. (when booting, when viewing menu and when unlocking etc.)

You must follow the formula as follows

You can see that password is set as “user=0000” and “admin=9999” if you input correct code. formula: Convert the last five digits of Mac address to decimal numbers and then make five numbers with the last digit of each number.

Example)

MAC:00-30-a1-80-12-88

If you convert the last five digits of Mac address to decimal numbers : 48-161-128-18-136

Then your code is “81886”

2. When you lost password, In case of using eDVR Manager to access DVR in Remote

When you lost remote access password, you have to click DVR's OSD Menu System->Miscellaneous->Reset values (System will be initialized) At that time all of DVR's Configuration will be initialized. and then, you must input Password "admin"