<p>* How to Reset EDVR Password </p><p>1. When you set up OSD Menu in Local, In case of lost password.</p><p>Please just click on PLUS10 key in the window that password will be input. (when booting, when viewing menu and when unlocking etc.) </p><p>You must follow the formula as follows</p><p>You can see that password is set as “user=0000” and “admin=9999” if you input correct code. formula: Convert the last five digits of Mac address to decimal numbers and then make five numbers with the last digit of each number.</p><p>Example)</p><p>MAC:00-30-a1-80-12-88</p><p>If you convert the last five digits of Mac address to decimal numbers : 48-161-128-18-136</p><p>Then your code is “81886”</p><p>2. When you lost password, In case of using eDVR Manager to access DVR in Remote </p><p>When you lost remote access password, you have to click DVR's OSD Menu System->Miscellaneous->Reset values (System will be initialized) At that time all of DVR's Configuration will be initialized. and then, you must input Password "admin"</p>