Muhammad Abdul Vasay

Muhammad Abdul Vasay 2010 – CE – 026 AutoCAD Lab File LAB – 9A

Command: AutoCAD menu utilities loaded.

Command: linetype

Command: rectangle Chamfer/Elevation/Fillet/Thickness/Width/: 0,0 Other corner: 36.44,18.94

Command: linetype

Command: rec RECTANGLE Chamfer/Elevation/Fillet/Thickness/Width/: 3.22,1 Other corner: 33.22,17.94

Command: rec RECTANGLE Chamfer/Elevation/Fillet/Thickness/Width/: 5.22,2.5 Other corner: 31.22,16.5

Command: rec RECTANGLE Chamfer/Elevation/Fillet/Thickness/Width/: 6.22,4 Other corner: 30.22,15

Command: line From point: 6.22,5 To point: 30.22,5

Page No. 28 Muhammad Abdul Vasay 2010 – CE – 026 AutoCAD Lab File

Command: circle 3P/2P/TTR/

Command: line From point: 5.22,13

Command: line From point: 5.22,6 To point:

Command: line From point: 31.22,13 To point:

Command: line From point: 31.22,6

Command: trim Select cutting edges: (Projmode = UCS, Edgemode = No extend) Select objects: 1 found Select objects: : r Enter fillet radius <1.0000>: 3

Command: fillet (TRIM mode) Current fillet radius = 3.0000 Polyline/Radius/Trim/: Select second object:

Command: linetype

Command: line From point: 2.22,0.5 To point: 11.75,0.5 To point: 11.75,18.44 To point: 2.22,18.44

Command: fillet (TRIM mode) Current fillet radius = 6.0000 Polyline/Radius/Trim/: r Enter fillet radius <6.0000>: 3

Command: linetype

Command: line From point: 34.22,0.5 To point: 24.75,0.5 To point: 24.75,18.44 To point: 34.22,18.44

Command: fillet (TRIM mode) Current fillet radius = 6.0000 Polyline/Radius/Trim/ 5