<p>Muhammad Abdul Vasay 2010 – CE – 026 AutoCAD Lab File LAB – 9A</p><p>Command: AutoCAD menu utilities loaded.</p><p>Command: linetype</p><p>Command: rectangle Chamfer/Elevation/Fillet/Thickness/Width/<First corner>: 0,0 Other corner: 36.44,18.94</p><p>Command: linetype</p><p>Command: rec RECTANGLE Chamfer/Elevation/Fillet/Thickness/Width/<First corner>: 3.22,1 Other corner: 33.22,17.94</p><p>Command: rec RECTANGLE Chamfer/Elevation/Fillet/Thickness/Width/<First corner>: 5.22,2.5 Other corner: 31.22,16.5</p><p>Command: rec RECTANGLE Chamfer/Elevation/Fillet/Thickness/Width/<First corner>: 6.22,4 Other corner: 30.22,15</p><p>Command: line From point: 6.22,5 To point: 30.22,5</p><p>Command: line From point: 6.22,14 To point: 30.22,14</p><p>Command: line From point: 24.22,14 To point: 24.22,5</p><p>Command: line From point: 12.22,14 To point: 12.22,5</p><p>Page No. 28 Muhammad Abdul Vasay 2010 – CE – 026 AutoCAD Lab File</p><p>Command: circle 3P/2P/TTR/<Center point>: 18.22,9.5 Diameter/<Radius>: 1.90</p><p>Command: circle 3P/2P/TTR/<Center point>: 12.22,9.5 Diameter/<Radius> <1.9000>: 1.90</p><p>Command: circle 3P/2P/TTR/<Center point>: 24.22,9.5 Diameter/<Radius> <1.9000>: 1.90</p><p>Command: line From point: 5.22,13</p><p>Command: line From point: 5.22,6 To point:</p><p>Command: line From point: 31.22,13 To point:</p><p>Command: line From point: 31.22,6</p><p>Command: trim Select cutting edges: (Projmode = UCS, Edgemode = No extend) Select objects: 1 found Select objects: <Select object to trim>/Project/Edge/Undo: </p><p>Command: line From point: To point: @1.5<90 To point: @1<0 To point: @3<270 To point: @1<180</p><p>Command: line From point: To point: @1.5<90 To point: @1<180 To point: @3<270 To point: @1<0</p><p>Page No. 29 Muhammad Abdul Vasay 2010 – CE – 026 AutoCAD Lab File</p><p>Command: line From point: 3.22,3.5 To point: 9,3.5 To point: 9,15.5 To point: 3.22,15.5</p><p>Command: fillet (TRIM mode) Current fillet radius = 1.0000 Polyline/Radius/Trim/<Select first object>: r Enter fillet radius <1.0000>: 3</p><p>Command: fillet (TRIM mode) Current fillet radius = 3.0000 Polyline/Radius/Trim/<Select first object>: Select second object:</p><p>Command: fillet (TRIM mode) Current fillet radius = 3.0000 Polyline/Radius/Trim/<Select first object>: Select second object:</p><p>Command: linetype</p><p>Command: line From point: 2.22,0.5 To point: 11.75,0.5 To point: 11.75,18.44 To point: 2.22,18.44</p><p>Command: fillet (TRIM mode) Current fillet radius = 3.0000 Polyline/Radius/Trim/<Select first object>: r Enter fillet radius <3.0000>: 6</p><p>Command: fillet (TRIM mode) Current fillet radius = 6.0000 Polyline/Radius/Trim/<Select first object>: Select second object:</p><p>Command: fillet (TRIM mode) Current fillet radius = 6.0000 Polyline/Radius/Trim/<Select first object>: Select second object:</p><p>Command: linetype</p><p>Page No. 30 Muhammad Abdul Vasay 2010 – CE – 026 AutoCAD Lab File</p><p>Command: circle 3P/2P/TTR/<Center point>: 7,9.5 Diameter/<Radius>: 0.20</p><p>Command: line From point: To point:</p><p>Command: line From point: 6.22,9.5 To point: @1<90 To point: 6.5,10.5 To point: @2<270 To point: 6.22,8.5</p><p>Command: circle 3P/2P/TTR/<Center point>: 29.5,9.5 Diameter/<Radius>: 0.20</p><p>Command: line From point: To point: 30.22,9.5 To point: @1<90 To point: 30,10.5 To point: @2<270 To point: 30.22,8.5</p><p>Command: line From point: 33.22,3.5 To point: 27.5,3.5 To point: 27.5,15.5 To point: 33.22,15.5</p><p>Command: fillet (TRIM mode) Current fillet radius = 6.0000 Polyline/Radius/Trim/<Select first object>: r Enter fillet radius <6.0000>: 3</p><p>Command: fillet (TRIM mode) Current fillet radius = 3.0000 Polyline/Radius/Trim/<Select first object>: Select second object:</p><p>Command: fillet (TRIM mode) Current fillet radius = 3.0000</p><p>Page No. 31 Muhammad Abdul Vasay 2010 – CE – 026 AutoCAD Lab File Polyline/Radius/Trim/<Select first object>: Select second object:</p><p>Command: linetype</p><p>Command: line From point: 34.22,0.5 To point: 24.75,0.5 To point: 24.75,18.44 To point: 34.22,18.44</p><p>Command: fillet (TRIM mode) Current fillet radius = 3.0000 Polyline/Radius/Trim/<Select first object>: r Enter fillet radius <3.0000>: 6</p><p>Command: fillet (TRIM mode) Current fillet radius = 6.0000 Polyline/Radius/Trim/<Select first object>: Select second object:</p><p>Command: fillet (TRIM mode) Current fillet radius = 6.0000 Polyline/Radius/Trim/<Select first object>: Select second object:</p><p>Command: linetype</p><p>Command: line From point: 10,10.5 To point: 10,8.5</p><p>Command: line From point: 26.5,10.5 To point: 26.5,8.5</p><p>Command: bhatch Select objects: 1 found Select objects: 1 found</p><p>Command: _qsave</p><p>Page No. 32</p>