NDS-Fittings-Catalog.Pdf

Your knowledgeable and trusted partner for the best in water management solutions

Product Catalog

Residential Stormwater Management

Commercial Stormwater Management

Professional Irrigation

Flow Management

2021 ndspro.com 170 FITTINGS & CLAMPS Product Catalog 2021 FITTINGS &CLAMPS FITTINGS & CLAMPS 171 Product Class 30PV Patent Pending Wt. Ea. (lbs.) Variable Angle Angle Variable ® ndspro.com valves, couplings, and couplings, and valves, White 12 1.00 Color Qty. Pkg. = Drain, Waste and Vent (Schedule 40 dimensions) and Vent DWV = Drain, Waste S&D = Sewer and Drain PVC = Polyvinyl Chloride HIPS = High-Impact Polystyrene One Adjustable Fitting for Any Job One Adjustable Fitting The patent-pending Swivel Fit Fitting can be set to any angle from 0º to 90º. 0º to 90º. Fitting can be set to any angle from It is a convenient solution to tackle any job and is easy and less expensive than connecting multiple fixed angle fittings. PVC S&D Swivel-Fit™ 0-90° Variable-Angled Fitting, 4 in. Hub Fitting, Variable-Angled PVC S&D Swivel-Fit™ 0-90° X Hub

for videos, specs, detail drawings and case studies, visit 4PVAF Part No. Description Variable Angle Fittings Variable Abbreviations pipe & Fitting SPT) Hub = Hub Socket (receives Hub) connect to fitting Spt= Spigot (pipe diameter, MPT = Male Pipe Thread FPT = Female Pipe Thread Standards PVC ASTM D-3034, D-2729 connectors in PVC and styrene. NDS continues its tradition of innovation with the with the innovation its tradition of continues styrene. NDS in PVC and connectors two fixed angle fitting that combines Swivel-Fit™ variable new patent pending adjustable fitting solution. fittings into one & DRAIN FITTINGS SEWER SOLVENT-WELD Our comprehensive line of sewer and drain fittings include s and drain fittings line of sewer Our comprehensive 172 FITTINGS & CLAMPS 45 Degree Elbow 90 Degree Long-Turn Street Elbow 90 Degree Long-Turn Elbow 90 Degree Elbow Double Cleanout Tee SOLVENT-WELD SEWER&DRAINFITTINGS Product Catalog 2021 NDS_302 NDS_310ST NDS_303 NDS_417P NDS_301 NDS_310 10PVCS&D90°Long-Turn Elbow, 6in.HubX 61P0 1OTPVCS&D90°Long-Turn Street Elbow, 4in.HubXSpt 41POST 10PVCS&D90°Long-Turn Elbow, 4in.HubX 41P0 P2PVCS&D90°Elbow, 3in.HubX 3P02 P2PVCS&D90°Elbow, 4in.HubX 4P02 P2PVCS&D90°Elbow, 6in.HubX 6P02 P2PVCS&D90°Elbow, 8in.HubX 8P02 1OTPVCS&D90°Long-Turn Street Elbow, 3in.HubXSpt 31POST 10PVCS&D90°Long-Turn Elbow, 3in.HubX 31P0 atN.Description Part No. Description Part No. Description Part No. PVCS&D Tee, 8in.HubX6 PVCS&D Tee, 8in.HubX4 86P01 PVCS&D Tee, 8in.HubX 84P01 PVCS&D Tee, 6in.HubX4 8P01 PVCS&D Tee, 6in.HubX 64P01 PVCS&D Tee, 4in.HubX 6P01 4P01 Description Part No. atN.Description Part No. Description Part No. 8P03 6P03 4P03 3P03 P1PVCS&D Tee, 3in.HubX 3P01 1PPVCS&DDoubleCleanout, 4in.HubX 417P PVC S&D45°Elbow, 8in.HubX PVC S&D45°Elbow, 6in.HubX PVC S&D45°Elbow, 4in.HubX PVC S&D45°Elbow, 3in.HubX ht .030PV 3.10 8 White ht 008 30PV 0.85 20 White ht 004 30PV 0.46 30 White oo Pkg. Qty. Color oo Pkg. Qty. 5.00 Color 4.72 3.00 3 2.38 7 White 3.66 2 White 0.95 8 White 9 White 20 White White Pkg. Qty. Color ht 50.57 35 White ht 414 30PV 1.41 24 White ht 00.40 40 White ht 50.68 25 White ht 3.00 6 White ht 6.50 4 White oo Pkg. Qty. Color ht 012 30PV 1.25 20 White ht 009 30PV 0.90 20 White oo Pkg. Qty. Color Pkg. Qty. Color ht .330PV 30PV 30PV 4.33 30PV 2.12 0.53 6 0.32 8 White 30 White 40 White White Wt. Ea.(lbs.) Wt. Ea.(lbs.) Wt. Ea.(lbs.) Wt. Ea.(lbs.) Wt. Ea.(lbs.) Wt. Ea.(lbs.) 30PV 30PV 30PV 30PV 30PV 30PV 30PV Product Class Product Class Product Class Product Class 30PV 30PV 30PV 30PV Product Class Product Class FITTINGS & CLAMPS 173 30PV 30PV 30PV 30PV 30PV 30PV 30PV 30PV 30PV 30PV 30PV 30PV ndspro.com Color Qty. Pkg. Wt. Ea. (lbs.)Class Product White 6 3.33 WhiteWhite 120White 45 0.22 10 0.37 1.30 Color Qty. Pkg. Wt. Ea. (lbs.) Product Class Color Qty. Pkg. Wt. Ea. (lbs.)Class Product Color Qty. Pkg. Wt. Ea. (lbs.) Product Class Color Qty. Pkg. Wt. Ea. (lbs.) Product Class WhiteWhite 25White 20 0.32 20 0.45 1.60 White 20White 20 0.45 1.10 30PV 30PV WhiteWhite 30White 20 0.36 1 1.10 3.00 30PV 30PV 30PV WhiteWhite 60 45 0.25 0.46 Color Qty. Pkg. Wt. Ea. (lbs.)Class Product WhiteWhite 30 10 0.86 1.80 White 30 0.33 PVC S&D Increaser/Reducer Bushing, 3 in. Hub X 4 in. Spt 3 in. Hub X 4 in. Bushing, PVC S&D Increaser/Reducer Spt 4 in. Hub X 6 in. Bushing, PVC S&D Increaser/Reducer Hub 3 in. Hub X 4 in. Coupling, PVC S&D Increaser/Reducer Hub 4 in. Hub X 6 in. Coupling, PVC S&D Increaser/Reducer Hub 6 in. Hub X 8 in. Coupling, PVC S&D Increaser/Reducer PVC S&D Slip Repair Coupling, 3 in. Hub X Hub PVC S&D Slip Repair Coupling, 4 in. Hub X Hub PVC S&D Slip Repair Coupling, for videos, specs, detail drawings and case studies, visit 8P05 X Hub 8 in. Hub PVC S&D Coupling, Part No.3P05 Description 4P05 X Hub 3 in. Hub PVC S&D Coupling, 6P05 4 in. Hub X Hub PVC S&D Coupling, 6 in. Hub X Hub PVC S&D Coupling, 4P07 6P07S 6P07 8P07 Part No.3P07 Description Part No. Description 4P03ST 4 in. Hub X Spt 6P03ST Elbow, PVC S&D 45° Street 6 in. Hub X Spt Elbow, PVC S&D 45° Street Part No.3P05R Description Part No.3P04 Description 3 in. Hub X Hub PVC S&D 22.5° Elbow, Part No. Description 3P03ST 3 in. Hub X Spt Elbow, PVC S&D 45° Street 4P046P04 4 in. Hub X Hub PVC S&D 22.5° Elbow, 6 in. Hub X Hub PVC S&D 22.5° Elbow, 4P05R NDS_304 NDS_407 NDS_307 NDS_305 NDS_303ST Slip Repair Coupling Coupling SOLVENT-WELD SEWER & DRAIN FITTINGS SEWER & SOLVENT-WELD Increaser/Reducer Coupling Increaser/Reducer Increaser/Reducer Bushing Increaser/Reducer 22-1/2 Degree Elbow 22-1/2 Degree 45 Degree Street Elbow Street 45 Degree 174 FITTINGS & CLAMPS Cleanout Plug Female FittingCleanoutAdapter Female CleanoutAdapter Cap Sanitary (Sweep)Tee 45 Degree Wye SOLVENT-WELD SEWER&DRAINFITTINGS Product Catalog 2021 NDS_418 NDS_306 NDS_413 NDS_413 NDS_308 NDS_309 18PVCS&DCleanoutPlug, 3in.MPT Description 31P8 Part No. PVCS&D FemaleFittingCleanout Adapter, 4in.SptXFPT Description 413P Part No. PVCS&DFemaleCleanout Adapter, 3in.HubXFPT Description 3P11 Part No. PVCS&DCap, 3in.Hub Description 3P06 Part No. PVCS&DSanitary Tee, 3in.HubX Description 3P09 Part No. PVCS&D45° Wye, 3in.HubX Description 3P08 Part No. 18PVCS&DCleanoutPlug, 4in.MPT 41P8 PVCS&DFemaleCleanout Adapter, 4in.HubXFPT 4P11 PVCS&DCap, 4in.Hub 4P06 PVCS&DSanitary Tee, 4in.HubX 4P09 PVCS&D45° Wye, 4in.HubX 4P08 18PVCS&DCleanoutPlug, 6in.MPT 61P8 PVCS&DFemaleCleanout Adapter, 6in.HubXFPT 613P PVCS&DCap, 6in.Hub 6P06 PVCS&DSanitary Tee, 6in.HubX 6P09 PVCS&D45° Wye, 6in.HubX 6P08 8P09 PVC S&D Sanitary PVCS&DSanitary Tee, 8in.HubX 8P09 PVCS&D45° Wye, 6in.HubX4 64P08 P6PVCS&DCap, 8in.Hub 8P06 P8PVCS&D45° Wye, 8in.HubX 8P08 40 PVCS&D45° Wye, 8in.HubX4 84P08 60 PVCS&D45° Wye, 8in.HubX6 86P08 ht 003 30PV 0.30 ProductClass Wt.Ea.(lbs.) 50 Pkg. Qty. White 30PV Color 0.50 ProductClass Wt.Ea.(lbs.) 20 Pkg. Qty. White 30PV Color 0.36 ProductClass Wt.Ea.(lbs.) 25 Pkg. Qty. White Color 30PV 0.20 ProductClass Wt.Ea.(lbs.) 25 Pkg. Qty. White Color 30PV 0.66 ProductClass Wt.Ea.(lbs.) 30 Pkg. Qty. White Color 30PV 0.88 ProductClass Wt.Ea. (lbs.) 25 Pkg. Qty. White Color ht 003 30PV 0.36 30 White 30PV 0.55 20 White 30PV 0.28 25 White 30PV 1.60 20 White 30PV 1.25 20 White ht 406 30PV 0.62 24 White 30PV 1.08 24 White 30PV 0.93 15 White 5 White 6 White ht 1 White 8 White ht 024 30PV 2.40 10 White ht 2 White ht 6 White ht 3 White .030PV 4.20 30PV 4.66 50 30PV 15.00 30PV 2.88 10 30PV 11.00 .330PV 5.33 .330PV 3.33 FITTINGS & CLAMPS 175 30PV 30PV 30PV 30PV 30PV 30PV 30PV 30PV Product Class Product Class 30PV 30PV Patent Pending Wt. Ea. (lbs.) Wt. Ea. (lbs.) ndspro.com White 20 0..35 30PV ColorWhite Qty. Pkg. Wt. Ea. (lbs.) 20 Product Class 0.20 ColorWhite Qty. Pkg. Wt. Ea. (lbs.) 50 Product Class 0.12 Color Qty. Pkg. Wt. Ea. (lbs.) Product Class ColorWhite Qty. Pkg. Wt. Ea. (lbs.) 60 Product Class 0.35 White 30 0.80 White 50 0.50 White 25 0.24 White 30 0.35 White 20 0.70 Color Qty. Pkg. Color Qty. Pkg. White 12 1.00 White 20 1.40

S&D Spt 3 in. S&D Spt S&D Hub S&D Spt Hub for videos, specs, detail drawings and case studies, visit 533 2 in. DWV/SCH40 Hub X 4 in. Adapter, PVC Increaser/Reducer Part No.532 Description 2 in. DWV/SCH40 Hub X Adapter Bushing, PVC Increaser/Reducer Part No.2P41 Description 3 in. DWV/SCH40 Spt X S&D Hub Adapter Bushing, PVC Part No. Description Part No.3P15 Description X S&D Hub 3 in. DWV/SCH40 Hub Adapter, PVC 3P16 Hub X S&D Hub 4 in. DWV/SCH40 Adapter, PVC 3P12 3 in. DWV/SCH40 Hub X 4 in. Adapter, PVC Increaser/Reducer 2P42 4 in. DWV/SCH40 Spt X S&D Hub Adapter Bushing, PVC 3P17 3 in. DWV/SCH40 Hub X 4 in. Adapter, PVC Increaser/Reducer 2P43 6 in. DWV/SCH40 Spt X S&D Hub Adapter Bushing, PVC Part No. Description Part No. Description 4PVAF 4 in. Hub X Fitting, Variable-Angled PVC S&D Swivel-Fit™ 0-90° 4P1X X Hub 4 in. Hub X Hub X Hub Cross, PVC S&D Variable-Angled Fitting Variable-Angled ™ NDS_401X NDS_407 NDS_407 NDS_2P41 Increaser/Reducer Adapter (DWV/SCH40 to S&D) Increaser/Reducer Adapter Bushing (DWV/SCH40 to S&D) Adapter Bushing (DWV/SCH40 Cross SOLVENT-WELD SEWER & DRAIN FITTINGS SEWER & SOLVENT-WELD Increaser/Reducer Adapter Bushing (DWV/SCH40 to S&D) Increaser/Reducer Adapter (DWV/SCH40 to S&D) Adapter (DWV/SCH40 to Swivel-Fit 176 FITTINGS & CLAMPS Pool BackflushFitting Deck Drain Drain Grate POOL ACCESSORIES Downspout AdapterforDWV/Schedule40Pipe Downspout AdapterforSewer&DrainPipe SOLVENT-WELD SEWER&DRAINFITTINGS Product Catalog 2021 NDS_912.EPS NDS_WC100.EPS NDS_903 NDS_903 5 HDPEPoolBackflush FittingwithRecessedGrate, 4in.tapered Spt Description 650 Part No. HIPSS&DDeck Drain, 3in.Hub Description WC100 Part No. 3in.PVCRoundGrate, Fits3in.Sewer&Drain Fittings Description 9P12 Part No. 30PV 0.30 40 White PVCDownspout Adapter, 2X3in.Downspout X3in.DWV/SCH40Hub Description 9P07 Part No. 30PV 0.42 40 White PVCOffsetDownspout Adapter, 2X3in.Downspout X3in.S&DHub Description 9P03 Part No. C0GHIPSS&DDeck Drain, 3in.Hub WC100G 4in.PVCRoundGrate, Fits4in.Sewer&Drain Fittings 9P11 P8PCDwsotAatr X n onpu n W/C4 u ht 011 30PV 1.10 30 White PVCDownspout Adapter, 2X3in.Downspout X4in.DWV/SCH40Hub 9P08 30PV 0.53 30 White PVCOffsetDownspout Adapter, 2X3in.Downspout X4in.S&DHub 9P04 C0THIPSS&DDeck Drain, 3in.Hub WC100T P9PCDwsotAatr X n onpu n W/C4 u ht 004 30PV 0.44 30 White PVCDownspout Adapter, 3X4in.Downspout X4in.DWV/SCH40Hub 9P09 30PV 0.50 25 White PVCDownspout Adapter, 3X4in.Downspout X4in. S&DHub 9P06 P0PCOfe onpu dpe,46i.DwsotX6i.SDHbWie1 .030PV 1.00 15 White PVCOffsetDownspout Adapter, 4X6in.Downspout X6in.S&DHub 9P10 P3PCOfe onpu dpe,34i.DwsotX4i.SDHbWie2 .030PV 0.50 25 White PVCOffsetDownspout Adapter, 3X4in.Downspout X4in.S&DHub 9P13 (Includes removable 4"grate NDS#11) lc 501 30ST 0.16 35 Black ht 001 30ST 0.16 50 White 30PV 0.16 50 White oo k.Qy t a ls)ProductClass Wt.Ea.(lbs.) Pkg. Qty. Color ProductClass Wt.Ea.(lbs.) Pkg. Qty. Color ProductClass Wt.Ea.(lbs.) Pkg. Qty. Color ry5 .630ST 0.16 50 Gray 30PV 0.36 25 White Tan oo k.Qy t a ls)ProductClass Wt.Ea.(lbs.) Pkg. Qty. Color oo k.Qy t a ls)ProductClass Wt.Ea.(lbs.) Pkg. Qty. Color 001 30ST 0.16 50 FITTINGS & CLAMPS 177 11RP 11RP 30PV 30ST 11RP 11RP 30PV 30ST 11RP 11RP 30PV 0.20 0.30 0.30 0.30 0.50 0.20 0.80 0.50 ndspro.com 24 60 33 36 32 24 12 15 Black 50 0.10 ColorBlack Qty. Pkg. Wt. Ea. (lbs.) Product Class ColorBlack Qty. Pkg. (lbs.) Wt. Ea. Product Class ColorBlack Qty. Pkg. Wt. Ea. (lbs.) Product Class Color Qty. Pkg. Wt. Ea. (lbs.) Product Class Black Black Black 25 0.20 Black Black Black Black 12 0.25 Corr. Hub Corr. Corr. Hub Corr. Corr. Hub Corr. for videos, specs, detail drawings and case studies, visit 351 Pipes & Fittings Spt X 3 in. 3 in. Drain Adapter, HDPE Corrugated Part No.234CDS Description Hub X 4 in. Corr. 2X3 in. Downspout Adapter, HDPE Downspout Part No.3C06 Description 3 in. HDPE End Cap, Part No. Description Part No.3C05 Description 3 in. HDPE Internal Coupling, 4C07 4 in. HDPE Internal Coupling, 4C06 4 in. HDPE End Cap, 451 Pipes & Fittings Spt X 4 in. 4 in. Drain Adapter, HDPE Corrugated 344CDS Hub X 4 in. Corr. 3X4 in. Downspout Adapter, HDPE Downspout 6C05 6 in. HDPE Internal Coupling, 6C06 6 in. HDPE End Cap, 651 Pipes & Fittings Spt X 6 in. 6 in. Drain Adapter, HDPE Corrugated NDS_351.EPS CORRUGATED FITTINGS CORRUGATED Downspout Adapter Adapter End Cap Coupling 178 FITTINGS & CLAMPS riser maybecuttothedesired length. direction oftheflowwater. Accessriserwithcoveroffers asimple,economicalaccesstothevalveforinspectionandmaintenance.The to Sewer&DrainAdapters.Lightweight,easyinstall.Horizontal installationrequired, witharrows ontopofthevalvehubpointingin a positiveseal.Valve huboutletsfit2",3",4"or6"DWVpipeandmaybeadaptedtosewerdrainwithNDS be easilyremoved andreplaced ifrequired. Threaded accesscap isdesignedforhandtightening.Accesscapneoprene gasketprovides The quickactionflapperallowsunrestricted uni-directional flow. Elastomericgasketintheflapperensures awatertightseal.Flappercan Backwater Valve It isavailablein2",3",4"and6"sizes,PVCmaterial.acost-effective andachemicallyresistant tocastiron alternative valves. The NDSgravityflowBackwater Valve isdesignedtoprotect lowareas orbasementsfrom thebackflowof waste from street sewers. Gravity BackwaterValve installing caps.)Thedivertershieldwhichhousesthestemmaybecuttodesired length. Connect 4"plasticseweranddrainpipetoinletsoutletsonthefour-way distributionbox.(Unwantedoutletsmaybesealedby Easy toInstall stem, flowmaybedivertedtoanytwooutlets. To allowflowthrough alloutlets,thevalvestemmaybe removed from theassembly. The divertervalvestemflowmaybecontrolled toindividualormultiplefields(upthree) inanycombination.Withathree-way valve Functional plastic thatwillnotshatter, bend,rustorcorrode. Itislighterinweight,easiertohandleandlessexpensiveship. Here’s thesimplest,strongest andmosteconomicaldivertervalveeverinventedforseptictankleachfields.Itismadeoftoughmolded Diverter Valve DIVERTER ANDBACKWATER VALVES A 4.125" O.D. Product Catalog 2021 NDS#575 AI.eps 6.305" 1" B 6" 30.5" *IAPMO Listed *IAPMO Listed. *IAPMO C ABS* PVC 575 atN.Description Part No. 7P4"PVCDiverter Valve 575P Approvals applicabletovalveonly. 7P 7 2.18" A 275P, 275 Item Number 7P 2.18" 275PR 7P 7 3.51" 375P, 375 7P,35 3.51" 375PR, 375R 7P 7 4.47" 475P, 475 7P 7 5.50" 4.47" 675P, 675 475PR, 475R 4" ABS Diverter Valve 4" ABS 5.03" B 5.03" 7.56" 7.56" 52"9.90" 7.18" 7.18" 15.25" 11.18" 11.18" lc 4 Black oo Pkg. Qty. Color ht 4 White 3.53" C 3.53" 6.10" 6.10" ie egtRiserDiameter 16" Riser Height 16" 16" 16" 16" 16" 16" 7.50 9.50 Wt. Ea.(lbs.) 4" 4" 6" 6" 10" 8" 8" 35AB 35PV Product Class FITTINGS & CLAMPS 179 Product Class Product Class 35PV 35PV 35PV 35PV 35PV 35PV 35PV 35PV 35PV 35PV 35PV 35PV 35PV 35PV 35PV 35PV 35PV 35PV 35PV 35PV 35PV 35PV 35PV 35PV 35PV 35PV 35PV 35PV 35PV Wt. Ea. (lbs.) Wt. Ea. (lbs.) Pkg. Pkg. Qty. Pkg. Pkg. Qty. ndspro.com White 1 White 1 Black 1 Black 5 White 5 Black 2 White 2 White 15 White 10 Black 10 White 10 Black 10 White 10 White 1 White 20 White 10 Black 10 White 10 Black 10 White 10 White 2 White 25 White 10 Black 10 White 10 Black 10 White 10 White 4 White 20 Color Carton Qty. Product Class Color BlackBlack 4 8 5.75 2.00 10ND 10ND Black 1 7.00 35AB Black 6 3.33 35AB Black 6 1.83 35AB Black 8 1.00 35AB White 1 9.00 35PV White 6 4.33 35PV White 6 2.33 35PV Color White 8 1.00 35PV 6" BWV Sewer Adapt Flange 6" BWV Sewer 4" BWV Sewer Adapt Flange 4" BWV Sewer Bumper (fits all sizes of valves) Bumper (fits all sizes of 6" Flapper O-Ring 6" Flapper 6" Cap O-Ring 6" Cap 6" Lid 4" Backwater Valve Pipe Extension Collar Valve 4" Backwater 4" Flapper O-Ring 4" Flapper 4" Cap O-Ring 4" Cap 4" Riser 4" Lid 3" Backwater Valve Pipe Extension Collar Pipe Extension Valve 3" Backwater 3" Flapper O-Ring 3" Flapper 3" Cap O-Ring 3" Cap 3" Riser 3" Lid 2" Backwater Valve Pipe Extension Collar Pipe Extension Valve 2" Backwater 2" Flapper O-Ring 2" Flapper 2" Cap O-Ring 2" Cap 2" Riser 2" Lid Description 6" ABS Backwater Valve and Cover Valve ABS Backwater 6" 4" ABS Backwater Valve with Riser and CoverValve ABS Backwater 4" Black 1 7.00 35AB 4" ABS Valve Backwater 3" ABS Backwater Valve with Riser and CoverValve ABS Backwater 3" Black 1 4.00 35AB 3" ABS Valve Backwater 2" ABS Valve Backwater 6" PVC Backwater Valve 6" PVC Backwater 4" PVC Backwater Valve with Riser and CoverValve 4" PVC Backwater White 1 8.00 35PV 4" PVC Backwater Valve 4" PVC Backwater 3" PVC Backwater Valve with Riser and CoverValve 3" PVC Backwater White 1 5.00 35PV 3" PVC Backwater Valve 3" PVC Backwater 2" PVC Backwater Valve with Riser and CoverValve 2" PVC Backwater White 1 5.00 35PV Description 2" PVC Backwater Valve 2" PVC Backwater

Part No.1219 Description 1220 Box Valve x 12" Backwater 12" Box Cover Valve x 12" 12"

for videos, specs, detail drawings and case studies, visit 3 11 11 1530605 1530405 880-202 880-259 1530603 880-271 1530602 8051-060-100 1530404 880-243 1530403 880-364 1530402 822-080-16 8051-040-080 1530304 880-234 675 1530303 475R 880-253 475 1530302 375R 822-060-16 375 8051-030-060 275 1530204 675P 880-136 475PR 1530203 475P 880-237 375PR 1530202 375P 822-040-16 275PR Part No. 8051-020-040 Part No. 275P " 8 / 1 1 12" Lid Riser Cap Cap O-Ring Flapper Flapper O-Ring Bumper BWV Pipe Extension Collar 6"

11 1 5 5 Backwater Valve Box Backwater Valve PVC Backwater Valve Components PVC Backwater Valve DIVERTER AND BACKWATER VALVES AND BACKWATER DIVERTER Backwater Valve 180

FITTINGS & CLAMPS NDS_02-43.eps NDS FlexibleCouplingSizingChart • • Installation • • • • Materials andStandards • • • Details • • • • NDS FLEXIBLECOUPLINGSANDCONNECTORS

• • • •

A Product Catalog 2021 All couplingsar Clamps installeasilywithascr AssociationofPlumbingandMechanical Officials) Association) andIAPMO(International NDS FlexibleCouplingshavelistingsfr All NDSclamps,includingthebandandhousing,are madefrom series300stainlesssteel,offering corrosion-resistant, rustproof reliability Bactericides andfungicidesar Flexible couplingsar Completely unaf Durable PVCconstructionallowscouplingstoflexwithnormalearthmovement non-pr Couplings andconnectorsfitovertheendsofplain-endorspigotpipetoformapositivesealagainstinfiltrationexfiltrationin Utility andplumbingapplications Dimensional flexibilityensur Innovative, flexiblecouplingsforsewer Choose thehigh-qualitycouplingsandconnectorsthateasilyadapttoanysituation NDS_02-44.eps 1-1⁄4" to15"pipe. Couplings availabletoconnect inches andmm. All dimensionsgivenin within +/-5%ODonchart. All couplingswillfitanypipetype supplied withallcouplings. 300 Seriesstainlesssteelclamps essure environments C e markedwithsizeandpipematerialsthatthecouplingwillconnect,eliminatingguessworkonjob fected bysoilconditionsandresistant tochemicals,UVraysandnormalsewergases NDS_56-32.eps e madeofelastomericpolyvinylchloride(PVC)forlong-lastingperformanceanddurability B es leakproof sealswithvirtuallyanypipematerial e addedtoPVCforextraprotection ewdriver, 5/16"nutdriverorsocketto60inch-lbs.poundstorque

, drain,wasteandventpipingallowanytwopipestobeconnectedquicklyeasily om the following code agencies: ICC (International CodeCouncil),CSA(CanadianStandardsom thefollowingcodeagencies:ICC(International 24 .51333 540 0 612 45CO 1.25 36 45CO 101 1.27 4.00 85 18 3.38 101 133 4.00 5.25 133 5.25 02-43 Part No. 133 5.25 Clay toCastIron orPlastic 01-44 Part No. Clay to 64 .21243 1 .0111 .645CO 1.66 18 101 4.00 111 4.38 142 5.62 06-44 Part No. Concrete toCastIron orPlastic 24 .51343 1 .0112 .445CO 1.04 24 101 4.00 111 4.38 133 5.25 02-44 66 .01843 1 .0121 .145CO 2.41 12 152 6.00 111 4.38 198 7.80 06-64 26 .81743 1 .0121 .045CO 2.50 12 152 6.00 111 4.38 187 7.38 02-64 02-55 66 .01863 6 .0121 .845CO 2.58 12 152 6.00 162 6.38 198 7.80 06-66 26 .81763 6 .0121 .845CO 2.38 18 152 6.00 162 6.38 187 7.38 02-66 68 02 6 .02560 5 .345CO 3.33 6 152 6.00 215 8.50 260 10.25 06-88 28 .52585 1 .012631 45CO 3.16 6 152 6.00 215 8.50 245 9.65 02-88 211 18 9 06 6 .012340 45CO 4.00 3 152 6.00 269 10.60 299 11.80 02-1010 211 43 6 26 2 .012552 45CO 5.20 5 152 6.00 320 12.60 365 14.38 02-1212 211 78 5 54 9 .012560 45CO 6.00 5 152 6.00 391 15.40 453 17.85 02-1515 nhsm nhsm nhsm k.Qy egtProductClass Weight Pkg. Qty. mm Inches ProductClass Weight mm Pkg. Qty. Inches mm mm Inches Inches mm Inches mm Inches nhsm nhsm nhsm k.Qy egtProductClass Weight Pkg. Qty. mm Inches mm Inches mm Inches A A A USE PART NO. 56-65 B B B C C C

FITTINGS & CLAMPS 181 ndspro.com C C B B A A Inches mm Inches mm Inches mmInches Qty. Pkg. mm Weight Inches Product Class mm Inches mm Qty. Pkg. Weight Product Class Cast Iron, Plastic, Copper, Steel or Lead to Cast Iron, Plastic, Copper, Steel or Lead Steel Plastic, Copper, Iron, Steel or Lead to Cast Plastic, Copper, Cast Iron, Part No. 56-125 1.65 40 1.65 40 4.00 101 90 0.36 45CO Asbestos Cement, Fibre or Ductile Iron to Cast Iron or Plastic to Cast Iron or Ductile Iron Asbestos Cement, Fibre Part No. 51-44 4.75 120 4.38 111 4.00 101 24 1.08 45CO 56-150/125 1.90 48 1.65 40 4.00 101 75 0.41 45CO 51-66 7.00 177 6.38 162 6.00 152 15 2.73 45CO 56-150 1.90 48 1.90 48 4.00 101 75 0.41 45CO 56-2150 2.40 60 1.90 48 4.00 101 54 0.51 45CO 56-22 2.40 60 2.40 60 4.00 101 54 0.50 45CO 56-32 3.38 85 2.40 60 4.00 101 45 0.71 45CO 56-33 3.38 85 3.38 85 4.00 101 45 0.75 45CO 56-42 4.38 111 2.40 60 4.00 101 30 0.93 45CO 56-E43 4.38 111 3.38 85 4.00 101 24 1.37 45CO 56-43 4.38 111 3.38 85 4.00 101 25 1.08 45CO 56-44 4.42 112 4.42 112 4.00 101 24 1.66 45CO 56-44W 4.42 112 4.42 112 4.00 101 24 1.17 45CO 56-55 5.62 142 5.62 142 4.00 101 18 1.38 45CO 56-63 6.38 162 3.38 85 6.00 152 12 1.67 45CO 56-E64 6.38 162 4.38 111 6.00 152 10 2.20 45CO 56-64 6.38 162 4.38 111 6.00 152 12 2.16 45CO 56-66 6.38 162 6.38 162 6.00 152 15 2.13 45CO 56-86 8.50 215 6.38 162 6.00 152 8 3.37 45CO 56-88 8.50 215 8.50 215 6.00 152 12 3.50 45CO 56-1010 10.60 269 10.60 269 7.00 178 2 6.00 45CO 56-1212 12.83 326 12.83 326 6.00 152 3 5.00 45CO for videos, specs, detail drawings and case studies, visit NDS_56-43.eps NDS_56-44.eps NDS_56-150.eps NDS FLEXIBLE COUPLINGS AND CONNECTORS COUPLINGS NDS FLEXIBLE Coupling Sizing Chart NDS Flexible 182 FITTINGS & CLAMPS Available in2"and 3"sizes. joints are madeof toughelastomericpolyvinylchloride(PVC).Theyare strong andresilient. free andrustproof. Theyare secured byseries300stainlesssteelclamps.NDS expansion contraction andexpansionofdrain,wastevent.Thesecouplingsare maintenance NDS FlexibleExpansionJointshaveaone-piecedesignwhichallowsforthethermal Expansion Joints inches forbothpipes.Adifference of6"betweenthetwopipeO.D.sizescannotbemade.Pleasecallfordetails1-800-726-1994. concrete, castiron, plastic,fiberglass, ductileiron andasbestos/cement.Whenordering please remember toprovide theexactO.D.sizein Large DiameterCouplingsare availablethrough NDS.Thelarge couplings are engineered forusewithall thecommonpipematerial:clay, Large DiameterCouplings clamps. gluing orsolderingandeliminatetheneedforspecialtoolsthreading. Simplyplacetheendsoverpipesandtightenstainlesssteel NDS Drain&Trap Connectorsare idealfornewinstallation,alterationsandrepairs. Theseconnectorsoffer to aquick,low-costalternative Drain andTrap Connectors NDS FLEXIBLECOUPLINGSIZINGCHART Product Catalog 2021 Part No. Clamps forFlexibleCouplings Description XJ3 Part No. 57-150/125 57-125/125 Description 57-125 Part No. 328CAP1"365 112 tils te .51045FS 45CO 45CO 100 45CO 100 45CO 100 45CO 0.25 100 45CO 0.25 0.20 100 100 45CO StainlessSteel 45CO 0.15 200 Stainless Steel 45CO 0.10 StainlessSteel 51-1/2" 0.15 45CO 300 40-1/2" 400 Stainless Steel 3.625" 0.10 400 StainlessSteel Stainless Steel 44" 0.10 500 39-1/2" 8.75" 0.05 Stainless Steel 16" 34-5/8" 11.75" 0.05 25" 0.05 Stainless Steel 12.62" 6.25" 19-3/4" Stainless Steel 13.75" 1.75" 33S248 CLAMP StainlessSteel 13-1/2" 1.75" 12.25" 33H250 CLAMP StainlessSteel 10-3/8" 2.00" 10.75" 33H212 CLAMP 8-3/4" 1.00" 7.75" 33H188 CLAMP 6-1/2" 2.06" 6.00" 33H164 CLAMP 1.00" 4.00" 33H116 CLAMP .75" 3.00" 33H088 CLAMP 2.50" 33H056 CLAMP 1.75" 33H040 CLAMP 33H032 CLAMP 33H020 CLAMP 3" ExpansionJoints 1-1/2" Drain Piping 1-1/2" DWVorCopperx1-1/4" 1-1/2" Drain Piping 1-1/4" DWVor1-1/2"Copperx 1-1/2" Drain Piping 1-1/4" or1-1/2"Drain Pipingx1-1/4"or a.Da i.Da eghColor Length Min.Dia. Max. Dia. CLAMP MIN. & MAX.DIAMETERS&OVERALL LENGTH oo k.Qy t a ls)ProductClass Wt.Ea.(lbs.) Pkg. Qty. Color ProductClass Wt.Ea.(lbs.) Pkg. Qty. Color lc 24 Black 0.25 0.22 120 0.17 Black 140 Black 180 Black egtPg t.ProductClass Pkg. Qty. Weight 0.67 45CO 45CO 45CO 45CO FITTINGS & CLAMPS 183 45CO 45CO IAMPO Listed. Product Calss Product Class ndspro.com Wt. Ea. (lbs.) Color Qty. Pkg. Wt. Ea. (lbs.) Product Class Color Qty. Pkg. (lbs.) Wt. Ea. Class Product Black 16 1.81 45CP Black 24 0.95 45CP Black 24 0.87 45CP Black 50 0.44 45CP Black 50 0.90 45CP Black 100 0.21 45CP Black 100 0.19 45CP Color Qty. Pkg. 8" Cap 6" Cap 5" Cap 4" Cap 3" Cap 2" Cap 1-1/2" Cap for videos, specs, detail drawings and case studies, visit 108 106 105 104 103 102 150 Part No. Description Part No.44U-405 Description Steel or C.I.XH (DWV) or Sch40 x 4" SV HUB x Sch40 4" Black 35 0.48 Part No.44U-405 Description ABS/PVC DWV or Adapter x C.I.XH x 4" SW Duplex 4" Black 35 0.48 NDS_104.eps Cleanout or Test Caps Cleanout or Test NDS Cleanout or Test Caps are designed to fit drain, waste and vent pipe materials. The 1-1⁄2" thru 4" NDS Caps are designed to fit schedule 4" NDS Caps are designed to fit drain, waste and vent pipe materials. The 1-1⁄2" thru Caps are NDS Cleanout or Test a quick and easy way to cap Our caps offer designed to fit SDR 35 nominal pipe sizes. are 40 nominal pipe sizes. The 6" thru 10" NDS Caps for testing and minimize ballooning. They pressure convex face allows the cap to withstand greater pipe ends and cleanouts. The reinforced also low cost and reusable. are Asbestos Cement Connectors – John Manville and Capco Asbestos Cement Connectors SV Cast Iron Connectors SV Cast Iron NDS CONNECTORS AND O-RINGS NDS CONNECTORS of sockets, hubs, between most types several points of seal & vent piping allow joints and drain waste for sewer pipe NDS Connectors in a available (PVC) and are polyvinyl chloride of tough elastomeric rings made donut-shaped Connectors are bells and spigots. NDS also are seals. They leakproof flexibility that ensures the dimensional They install quickly and easily and offer range of sizes up to 6". of the material. NDS and physical properties nature and normal sewer gases due to the inert growth to chemicals, fungus resistant not perform pipes and 6" sewer pipes. NOTE: Connectors may easy connection between most 4" house a quick and O-Rings provide or design by the being connected or changes in pipe dimensions or insufficient description of the pipes as intended due to improper various manufacturers. 184 FITTINGS & CLAMPS water tables. that caninfluencetheproduct’s effectiveness asapositiveseal,suchas:fieldconditions, qualityof grout, workmanship andhigh-ground compromising theintegrityofseal.However, NDSdoesnotwarrantthisproduct asapositivewatersealduetothemanyvaryingfactors Our adaptershelpeliminateleaksaround pipeenteringmanholewallsandare flexibleenoughtopermitsomelateralpipemovementwithout NDS Concrete ManholeCoverAdaptersare madeofelastomericpolyvinylchloride(PVC)andare availablefor4",6",8",10",and12"pipe. CONCRETE MANHOLECOVERADAPTERS Product Catalog 2021 12MA 8MA Description 6MA 4MA Part No. 12" Manhole Adapter 12" Manhole Adapter 8" Manhole Adapter 6" Manhole Adapter 4" oo k.Qy t a ls)ProductClass Wt.Ea.(lbs.) Pkg. Qty. Color lc 1.50 1.00 0.62 6 1.00 14 Black 24 Black 24 Black Black 45CO 45CO 45CO 45CO FITTINGS & CLAMPS 185 ENTED 45FS 45FS 45FS 45FS 45FS 45FS 45FS 45FS 45FS PAT REINFORCEMENT BARS D543 D412 Die “C” D2240 D395, Method B Type 2 Type Method B D395, D471, immersed 7 days @158 D471, Method A D1149, D518 Method A D518 Method D1149, D573 (158˚F for 70 hours) D476 D624 Die “C” ASTM Test Material ASTM Test 0.25 3.16 2.66 7.66 7.12 6.50 6.0 9.9 11.75 ndspro.com Pkg. Qty.Pkg. Wt. Ea. (lbs.) Product Class Pkg. Qty.Pkg. Ea. (lbs.) Wt. Product Class 12 12 6 6 6 6 4 4 DFW BY NDS FLEXIBLE SADDLE DFW BY NDS FLEXIBLE Stainless Steel 100 Color Color Black Black Black Black Black Black Black Black

No weight loss No weight loss Shore durometer 50 min. to 75 max. Shore 30% max. of original deflection 5% max. No visible cracking under 7x magnification No visible cracking 75% min. of original tensile strength 75% min. of original tensile strength 65% min. of original elongation Cold brittleness was determined to be -43˚C Cold brittleness was 125 lbs./in. NDS Material

Description 4" Tees with Clamps Tees 4" Description 4" Tees without Clamps Tees 4" 4" Wyes with Clamps Wyes 4" 4" Wyes without Clamps Wyes 4" 6" Tees with Clamps Tees 6" 6" Tees without Clamps Tees 6" 6" Wyes with Clamps Wyes 6" 6" Flex Wye without Clamps Wye 6" Flex e tight seal for videos, specs, detail drawings and case studies, visit 4T/C Part No. 33S248 CLAMP Coupling Clamp for Flexible ASTM Material Specification Test Chemical Resistance 1N sulfuric acid acid 1N hydrochloric Part No. Elongation Strength Tensile Hardness Duration 1000 psi (7/Mpa) min. 200% min. elongation @ break Compression Set Compression Water Absorption Water Ozone Resistance Oven Aging Cold Brittleness Tear Strength Tear 4T/WOC 4Y/C 4Y/WOC 6T/C 6T/WOC 6Y/C 6Y/WOC ovides maximum strength and flexibility and ovides maximum strength om SCH-40 down to SDR-35 includes standard includes standard om SCH-40 down to SDR-35 onmentally wise einforced edges prevent distortion when torque is distortion when torque edges prevent einforced vailable saddle blanket, attached to pipe prior to saddle installation, vailable saddle blanket, attached to pipe prior wo configurations, a “Tee” and a “Wye” are available in and a “Wye” are wo configurations, a “Tee” weight soil pipe T 4" or 6" inlet descriptions applied to clamps Saddle economical Durable design and low unit price make the Flexible and envir A taps will mend imperfections and cracks on clay pipe Saddle design will accommodate polyethylene pipe used in slip polyethylene pipe used in slip Saddle design will accommodate lining sewer systems Inlet range fr Stainless steel series 300 clamps ensur Steel-r pr Elastomeric construction • Saddle Clamps NDS Flexible Saddles NDS Flexible Saddle offers the following product benefits: following product the NDS Flexible Saddle offers • • NDS FLEXIBLE SADDLES NDS FLEXIBLE Saddle demonstrates patented NDS Flexible in saddle design, the A breakthrough saddle up. durability and flexibility, For superior fit 6" sewer main to securely elastomeric construction allows a single description saddle’s The one way. than superior flexibility in more various descriptions. inventory of rigid PVC saddles of eliminates the need for a large flexibility saddle’s pipe diameters and up.The • • • • • 186 FITTINGS & CLAMPS Stainless SteelPinchClampCrimpTool Stainless SteelPinch"Crimp"HoseClamps CLAMPS Product Catalog 2021 NCT-1098 Part No. Part No. C150-0 133R1/2"SSCrimpClamp NC-155000-003 C150-0 157R3/8"SSCrimpClamp NC-155000-008 C150-0 170RSSCrimpClamp NC-155000-009 C150-1 185R23/32"SSCrimpClamp NC-155000-010 C150-1 198R5/8"SSCrimpClamp NC-155000-011 C150-1 210R13/16"SSCrimpClamp NC-155000-012 C150-1 226RSSCrimpClamp NC-155000-013 C150-1 256R3/4"SSCrimpClamp NC-155000-015 C150-1 271R3/4"SSCrimpClamp NC-155000-016 C150-1 286RSSCrimpClamp NC-155000-017 C150-1 316R15/16"SSCrimpClamp NC-155000-019 C150-2 331R1"SSCrimpClamp NC-155000-020 C150-2 346R1-3/8"SSCrimpClamp NC-155000-021 C150-2 361RSSCrimpClamp NC-155000-022 C150-2 396RSSCrimpClamp NC-155000-025 C150-2 410R1-5/8"SSCrimpClamp NC-155000-026 C150-2 425R1-1/4"SSCrimpClamp NC-155000-027 C150-2 440R1-1/4"SSCripmClamp NC-155000-028 C150-3 485R1-7/8"SSCrimpClamp NC-155000-031 C150-3 500R1-1/2"SSCrimpClamp NC-155000-032 C150-3 515R1-1/2"SSCrimpClamp NC-155000-033 C150-3 605R2-3/8"SSCrimpClamp NC-155000-039 C150-4 620R2SSCrimpClamp NC-155000-040 C150-4 650R2SSCrimpClamp NC-155000-042 Description Standard Jaw Crimp Standard Jaw Tool Description k.Qy atnQy ProductClass CartonQty. 1 Pkg. Qty. k.Qy ae t.ProductClass Case. Qty. Pkg. Qty. 100 100 100 100 100 100 100 100 100 100 100 100 100 100 80 80 80 80 50 50 50 40 40 30 10 100 100 100 3000 3000 2500 100 100 2000 100 2000 2000 1500 1500 100 100 1500 100 1500 100 100 100 100 100 45PC 45PC 45PC 45PC 45PC 45PC 45PC 45PC 45PC 45PC 45PC 45PC 45PC 45PC 45PC 45PC 45PC 45PC 45PC 45PC 45PC 45PC 45PC 45PC 45PC FITTINGS & CLAMPS 187 ndspro.com 1010 500 500 45HC 45HC 1010 10010 10010 45HC 100 45HC 100 45HC 45HC 1010 50010 50010 45HC 50010 45HC 50010 45HC 50010 45HC 50010 45HC 20010 45HC 20010 45HC 20010 45HC 20010 45HC 20010 45HC 200 45HC 100 45HC 45HC 1010 20010 20010 45HC 200 45HC 200 45HC 45HC Pkg. Qty.Pkg. Qty. Case. Product Class SAE 52, 1/2" Band Width, Effective Diameter Range: 2-13/16" Min., 3-3/4" Max. 2-13/16" Min., Effective Diameter Range: Width, 1/2" Band SAE 52, 4" Max. 3-1/16" Min., Effective Diameter Range: Width, 1/2" Band SAE 56, 4-1/2" Max. 3-9/16" Min., Effective Diameter Range: Width, 1/2" Band SAE 62, 5" Max. 1-7/8" Min., Effective Diameter Range: Width, 1/2" Band SAE 72, 5-1/2" Max. 2-1/2" Min., Effective Diameter Range: Width, 1/2" Band SAE 80, 6" Max. 3-1/8" Min., Effective Diameter Range: Width, 1/2" Band SAE 88, 6-1/2" Max. 3-5/8" Min., Effective Diameter Range: Width, 1/2" Band SAE 96, 7" Max. 4-1/8" Min., Effective Diameter Range: Width, 1/2" Band SAE 104, SAE 20, 1/2" Band Width, Effective Diameter Range: 13/16" Min., 1-3/4" Max. 13/16" Min., Effective Diameter Range: Width, 1/2" Band SAE 20, 2" Max. 1-1/16" Min., Effective Diameter Range: Width, 1/2" Band SAE 24, 2-1/4" Max. 1-5/16" Min., Effective Diameter Range: Width, 1/2" Band SAE 28, 2-1/2" Max. 1-9/16" Min., Effective Diameter Range: Width, 1/2" Band SAE 32, 3" Max. 2-1/16" Min., Effective Diameter Range: Width, 1/2" Band SAE 40, 3-1/4" Max. 2-5/16" Min., Effective Diameter Range: Width, 1/2" Band SAE 44, 3-1/2" Max. 2-9/16" Min., Effective Diameter Range: Width, 1/2" Band SAE 48, SAE 10, 1/2" Band Width, Effective Diameter Range: 9/16" Min., 1-1/6" Max. 9/16" Min., Effective Diameter Range: Width, 1/2" Band SAE 10, 1-1/4" Max. 11/16" Min., Effective Diameter Range: Width, 1/2" Band SAE 12, 1-1/2" Max. 13/16" Min., Effective Diameter Range: Width, 1/2" Band SAE 16, SAE 8, 5/16" Band Width, Effective Diameter Range: 1/2" Min., 29/32" Max. 1/2" Min., Effective Diameter Range: Width, 5/16" Band SAE 8, 25/32" Max. 7/16" Min., Effective Diameter Range: Width, 1/2" Band SAE 6, 29/32" Max. 1/2" Min., Effective Diameter Range: Width, 1/2" Band SAE 8, SAE 6, 5/16" Band Width, Effective Diameter Range: 7/16" Min., 25/32" Max. 7/16" Min., Effective Diameter Range: Width, 5/16" Band SAE 6, for videos, specs, detail drawings and case studies, visit 64016H 64088H 64096H 64104H 64020H 64024H 64028H 64032H 64040H 64044H 64048H 64052H 64056H 64064H 64072H 64080H 3606 64006H 64008H 64036H 2-3/4" Max. 1-13/16" Min., Effective Diameter Range: Width, 1/2" Band SAE 36, Part No.3604 Description 64010H 64012H Superior Longevity – 100% stainless steel construction Superior Longevity – slots perforated underside plate, Conical arched – 4 piece design includes Added Strength per screw threads and more threads Drive – Buttressed Smoother Worm pliable (soft) hose or tube and secure around Primarily use to tighten softeners, air conditioning for dishwashers, garbage disposals, water Plumbing: Connections stabilize risers to stake poly tubing, Irrigation: Secure Worm Drive Hose Clamps Drive Worm CLAMPS 188 FITTINGS & CLAMPS Worm DriveHoseClamps(cont.) CLAMPS Product Catalog 2021 atN.Description 200 06H Part No. 200 36H 200 32H 200 28H 200 24H 200 20H 200 16H 200 12H 200 10H 200 08H 200 212H 200 188H 200 152H 200 128H 200 104H 200 96H 200 88H 200 80H 200 72H 200 64H 200 56H 200 52H 200 48H 200 44H 200 40H SAE 212, 9/16"Band Width, EffectiveDiameterRange: 10-7/8" Min., 13-3/4"Max. SAE 188, 9/16"Band Width, EffectiveDiameterRange: 9-3/8"Min., 12-1/4" Max. SAE 152, 9/16"Band Width, EffectiveDiameterRange: 7-1/8"Min., 10"Max. SAE 128, 9/16"Band Width, EffectiveDiameterRange: 5-5/8"Min., 8-1/2" Max. SAE 104, 9/16"Band Width, EffectiveDiameterRange: 4-1/8"Min., 7"Max. SAE 96, 9/16"Band Width, EffectiveDiameterRange: 3-5/8"Min., 6-1/2"Max. SAE 88, 9/16"Band Width, EffectiveDiameterRange: 3-1/8"Min., 6"Max. SAE 80, 9/16"Band Width, EffectiveDiameterRange: 2-1/2"Min., 5-1/2"Max. SAE 72, 9/16"Band Width, EffectiveDiameterRange: 1-7/8"Min., 5"Max. SAE 62, 9/16"Band Width, EffectiveDiameterRange: 3-9/16"Min., 4-1/2"Max. SAE 56, 9/16"Band Width, EffectiveDiameterRange: 3-1/16"Min., 4"Max. SAE 52, 9/16"Band Width, EffectiveDiameterRange: 2-13/16"Min., 3-3/4"Max. SAE 48, 9/16"Band Width, EffectiveDiameterRange: 2-9/16"Min., 3-1/2"Max. SAE 44, 9/16"Band Width, EffectiveDiameterRange: 2-5/16"Min., 3-1/4"Max. SAE 40, 9/16"Band Width, EffectiveDiameterRange: 2-1/16"Min., 3"Max. SAE 36, 9/16"Band Width, EffectiveDiameterRange: 1-13/16"Min., 2-3/4"Max. SAE 32, 9/16"Band Width, EffectiveDiameterRange: 1-9/16"Min., 2-1/2"Max. SAE 28, 9/16"Band Width, EffectiveDiameterRange: 1-5/16"Min., 2-1/4"Max. SAE 24, 9/16"Band Width, EffectiveDiameterRange: 1-1/16"Min., 2"Max. SAE 20, 9/16"Band Width, EffectiveDiameterRange: 13/16"Min., 1-3/4"Max. SAE 16, 9/16"Band Width, EffectiveDiameterRange: 13/16"Min., 1-1/2"Max. SAE 12, 9/16"Band Width, EffectiveDiameterRange: 11/16"Min., 1-1/4"Max. SAE 10, 9/16"Band Width, EffectiveDiameterRange: 9/16"Min., 1-1/6"Max. SAE 8, 9/16"Band Width, EffectiveDiameterRange: 1/2"Min., 29/32"Max. SAE 6, 9/16"Band Width, EffectiveDiameterRange: 7/16"Min., 25/32"Max. k.Qy ae t.ProductClass Case. Qty. Pkg. Qty. 05045HC 45HC 500 45HC 500 45HC 10 500 45HC 10 500 45HC 10 500 45HC 10 500 45HC 10 500 45HC 10 200 10 200 10 10 01045HC 45HC 100 45HC 100 45HC 10 100 45HC 10 100 45HC 10 100 45HC 10 100 45HC 10 100 45HC 10 100 45HC 10 100 45HC 10 200 45HC 10 200 45HC 10 200 45HC 10 200 45HC 10 200 45HC 10 200 10 500 10 10 FITTINGS & CLAMPS 189 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA 45CA Carton Qty.1 Class Product 1 15 10 7 50 44 38 15 40 34 13 40 24 14 34 34 31 23 28 17 20 16 21 41 38 28 34 21 24 22 25 34 23 ndspro.com Carton Qty. (lbs.) Weight Product Class 12/144 29 12/144 23 12/144 15 12/144 12 6/72 6/72 6/72 9/108 9/108 9/108 9/108 5/60 5/60 5/60 4/48 1/12 1/12 1/12 Carton Qty. (lbs.) Weight Product Class 80 64 36 36 12 12 8 8 80 64 36 36 12 12 8 8 8 4 Hi-Torq 80 wrench Hi-Torq Description Hi-Torq 125 wrench Hi-Torq Size Description 1-1/2" 80 Couplings Hi-Torq 2" 80 Couplings Hi-Torq 3" 80 Couplings Hi-Torq 4" 80 Couplings Hi-Torq 5" 80 Couplings Hi-Torq 6" 80 Couplings Hi-Torq 8" Couplings 80 Hi-Torq 10" 80 Couplings Hi-Torq 1-1/2" 125 Couplings Hi-Torq 2" 125 Couplings Hi-Torq 3" 125 Couplings Hi-Torq 4" 125 Couplings Hi-Torq 5" 125 Couplings Hi-Torq 6" 125 Couplings Hi-Torq 8" 125 Couplings Hi-Torq 10" 125 Couplings Hi-Torq 12" 125 Couplings Hi-Torq 15" 125 Couplings Hi-Torq for videos, specs, detail drawings and case studies, visit 99080 80 Part No. Size Part No. Description 99125 125 31575 1-1/2" x 3/4" CU 30151 1-1/2" x 1" CU Part No. 31512 1-1/2" x 1-1/4" CU 81015 31515 1-1/2" x 1-1/2" CU 81020 30215 2" x 1-1/2" CU 81030 20215 PVC STL, 2" x 1-1/2" CI, 81040 30022 XH 2" x 2" CU, 81050 30032 3" x 2" CU 81060 20032 PVC STL, 3" x 2" CI, 81080 20325 PVC STL, 3" x 2-1/2" CI, 81100 30033 XH 3" x 3" CU, 10015 30043 4" x 3" CU 10020 20043 PVC STL, 4" x 3" CI, 10030 30044 XH 4" x 4" CU, 10040 20054 PVC STL, 5" x 4" CI, 10050 20064 PVC STL, 6" x 4" CI, 10060 20065 PVC STL, 6" x 5" CI, 10080 20086 PVC STL, 8" x 6" CI, 10100 10120 10150 Tools Hi-Torq Hubless Pipe Couplings Hi-Torq ® Increaser/Reducer Bushings Transition ® ® Snap-Alll Clamp-Alll CLAMPS Clamp-All 190 FITTINGS & CLAMPS FITTINGS &CLAMPSPRODUCTSINDEX 4P03ST 4P03 4P02 4P1X 4P01 4MA 4C07 4C06 3P17 3P16 3P15 3P12 3P11 3P09 3P08 3P07 3P06 3P05R 3P05 3P04 3P03ST 3P03 3P02 3P01 3C06 3C05 2P43 2P42 2P41 02-1515 02-1212 02-1010 02-88 02-66 02-64 02-55 02-44 02-43 6P07 6P06 6P05 6P04 6P03ST 6P03 6P02 6P01 6MA 6C06 6C05 06-88 06-66 06-64 06-44 4Y/WOC 4Y/C 4T/WOC 4T/C 4PVAF 4P11 4P09 4P08 4P07 4P06 4P05R 4P05 4P04 01-44 Part No. Product Catalog 2021

171, aePartNo. Page 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 185 185 175 72 72 75 72 84 77 77 75 75 75 75 74 74 74 73 74 73 73 73 73 72 72 72 77 77 75 75 75 80 80 80 80 80 80 80 80 80 80 73 74 73 73 73 72 72 72 84 77 77 80 80 80 80 85 85 74 74 74 73 74 73 73 73 73 56-E64 56-E43 56-2150 56-1212 56-1010 56-125 56-88 56-86 56-66 56-64 56-63 56-55 56-44 56-43 56-42 56-33 56-32 56-22 51-66 51-44 44U-405 41POST 41P8 41P0 33S248 CLAMP 33H250 CLAMP 33H212 CLAMP 33H188 CLAMP 33H164 CLAMP 33H116 CLAMP 33H088 CLAMP 33H056 CLAMP 33H040 CLAMP 33H032 CLAMP 33H020 CLAMP 31POST 31P8 31P0 12MA 9P13 9P12 9P11 9P10 9P09 9P08 9P07 9P06 9P04 9P03 8P09 8P08 8P07 8P06 8P05 8P03 8P02 8P01 8MA 6Y/WOC 6Y/C 6T/WOC 6T/C 6P09 6P08 6P07S 56-150/125 56-150

aePartNo. Page 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 185 185 1 1 1 1 1 181 181 81 81 81 81 81 81 81 81 81 81 81 81 81 81 81 81 81 81 81 81 83 72 74 72 82 82 82 82 82 82 82 82 82 82 82 72 74 72 84 76 76 76 76 76 76 76 76 76 76 74 74 73 74 73 72 72 72 84 85 85 74 74 73 375PR 375P 344CDS 275PR 275P 57-125 532 475PR 475P 413P 375R 375 351 275 234CDS 200 212H 200 188H 200 152H 200 128H 200 104H 200 96H 200 88H 200 80H 200 72H 200 64H 200 56H 200 52H 200 48H 200 44H 200 40H 200 36H 200 32H 200 28H 200 24H 200 20H 200 16H 200 12H 200 10H 200 06H 200 150 108 106 105 104 103 102 86P08 86P01 84P08 84P01 64P08 64P01 61P8 61P0 57-150/125 57-125/125 651 650 613P 575P 575 533 475R 475 451 417P

178 178 178 178 178 178 178 178 178 178 aePartNo. Page , , , , , , , , , , 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 177 177 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 182 179 179 179 179 179 179 179 179 179 179 77 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 88 83 83 83 83 83 83 83 74 72 74 72 74 72 74 72 82 82 77 76 74 78 78 75 75 78 77 72 74 64010H 64008H 64006H 31575 31515 31512 30215 30151 30044 30043 30033 30032 30022 20325 20215 20086 20065 20064 20054 20043 20032 10150 10120 10100 10080 10060 10050 10040 10030 10020 10015 8051-060-100 8051-040-080 8051-030-060 8051-020-040 3606 3604 1220 1219 880-364 880-271 880-259 880-253 880-237 880-234 880-202 880-136 822-080-16 822-060-16 822-040-16 675P 675 64080H 64072H 64064H 64056H 64052H 64048H 64044H 64040H 64036H 64032H 64028H 64024H 64020H 64016H 64012H

178 178 aePartNo. Page , , 187 187 189 189 189 189 189 189 189 189 189 189 189 189 189 189 189 189 189 189 189 189 189 189 189 189 189 189 189 189 179 179 179 179 187 187 179 179 179 179 179 179 179 179 179 179 179 179 179 187 187 187 187 187 187 187 187 187 187 187 187 187 187 187 187 179 179 NCT-1098 NC-155000-042 NC-155000-040 NC-155000-039 NC-155000-033 NC-155000-032 NC-155000-031 NC-155000-028 NC-155000-027 NC-155000-026 NC-155000-025 NC-155000-022 NC-155000-021 NC-155000-020 NC-155000-019 NC-155000-017 NC-155000-016 NC-155000-015 NC-155000-013 NC-155000-012 NC-155000-011 NC-155000-010 NC-155000-009 NC-155000-008 XJ3 64088H WC100 NC-155000-003 1530605 1530603 1530602 1530405 1530404 1530403 1530402 1530304 1530303 1530302 1530204 1530203 1530202 99125 99080 81100 81080 81060 81050 81040 81030 81020 81015 64104H 64096H WC100T WC100G

1 1 1 186 186 186 186 186 186 186 186 186 186 186 186 186 186 186 186 186 186 186 186 186 186 186 186 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 176 86 79 79 79 79 79 79 79 79 79 79 79 79 79 89 89 89 89 89 89 89 89 89 89 87 87 87 82 76 76 FITTINGS & CLAMPS 191 ndspro.com for videos, specs, detail drawings and case studies, visit NOTES You Click, You Order. No Waiting. Getting connected is easy… set up your account online, or call customer service. 800-7261994. Se Habla Español.

ndspro.net

The 24 hour online dealer tool that helps you manage your NDS Business

Pricing Query

Instant Order Entry, No Wait

Check Discount Schedules

Check Order Status

Invoice Printing

Inventory Query

Manage Your Account

News Updates

Links to ndspro.com NEW! Shopping Cart and Literature Direct Easy to Use & Convenient TERMS AND CONDITIONS OF SALE

Terms: Standard terms are NET 30 days. All invoices are to be paid in US Currency. Title and risk of loss pass to buyer upon shipment.

Freight Allowance: Freight prepaid on orders of $1250.00 NET or more, with the exception of shipments to HI, Canada, AK, and PR Prepaid freight levels are based on shipments to one location only. It is the responsibility of the customer to determine if his purchase order meets the minimum freight allowance required. NDS reserves the right to select the carrier and point of shipment.

Canada, Hawaii, Puerto Rico & Alaska orders that include EZflow must be a minimum of $4000 for prepaid freight Terms.

Canada, Puerto Rico & Alaska: Freight prepaid on orders of $2500.00 (US$) NET or more.

Hawaii Orders: Freight prepaid on orders of $3500 NET or more.

Errors & Claims: All claims for shortage in shipment or damaged material must be noted on the “Bill of Lading” and a written request for credit submitted to NDS within 15 days of shipment. NDS responsibility ceases upon delivery to the carrier.

Returned Goods: Returned goods will be accepted only after written approval and shipping instructions are received from NDS. A return goods authorization number is required and must be on all cartons, documents, and correspondence. All returns are subject to a 25% restocking charge, freight cost of returned goods (plus “out freight if applicable”). A higher restocking charge may be assessed against any return requiring extraordinary handling costs.

Minimum Order: $100.00 minimum order net billing.

Broken Box Charge: A 25% broken box charge will be added for other than full box quantities. 21DI Drip Components, 25DS Dura Slope Channel and 25FC Filcoten Channel are excluded from this policy.

Limited One Year Warranty: The liabilities of NDS are limited solely and exclusively to replacement as set forth in our standard “Statement of Warranty”, alone and do not include any liability for incidental, consequential or other damage of any kind whatsoever, whether any claim is based upon theories of contract, warranty, negligence or tort and without any limitations and do not include shipping charges, labor, installation or any other losses or expenses incurred in operation of any replacement specialty item or fitting. NDS drainage products are designed to be used for exterior surface drainage only.

Limited Lifetime Warranty: NDS warrants to the original owner of its NDS catch basins, grates, channel and Pro Series valve boxes, subject to the conditions set forth in this warranty, that NDS catch basins, grates, channel and Pro Series valve boxes will remain free from manufacturing defects.

All NDS products are guaranteed against defects resulting from faulty workmanship or materials. Claims for labor costs and other expenses required to replace defective products or repair of any damage resulting from the use thereof will not be allowed by NDS. Our liability is limited to replacement of products acknowledged by NDS to be defective.

Exclusive Warranties and Remedies: The foregoing remedies are exclusive and are given and accepted in lieu of (I) any and all other warranties, expressED or implied, including without limitation the implied warranties of merchantability and fitness for particular purpose; and (ii) any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from NDS, Inc.’s negligence, actual or imputed. The remedies of customer shall be limited to those provided herein to the exclusion of any and all other remedies including, without limitation, incidental or consequential damages. No agreement varying or extending the foregoing warranties or these limitations will be binding on NDS, Inc., unless such is signed in writing by an authorized officer of NDS, Inc.

The liability of NDS, Inc., hereunder shall be limited to restoring to good working order, provided that NDS, Inc., is not required to restore the product to good working order when such failure is due to causes beyond NDS, Inc.’s control, including but not limited to, acts of God, acts of civil or military authority, priorities, strikes, floods, epidemics, war, riots, and other causes that are beyond the manufacturers control.

These provisions are complete and exclusive statements of all terms and conditions between NDS, Inc., and the consumer. These provisions may not be varied, supplemented, qualified or interpreted by any prior course of dealings, written or oral or by trade usage. No NDS, Inc. agent, officer or employee has authority to make any representation, promise or warranty concerning these provisions.

FOR TECHNICAL INFORMATION, CONTACT: Technical Services, (888) 825-4716, [email protected]

Visit ndspro.com for more information.

Product Catalog 2021 Our products are engineered and produced for performance, durability, ease of installation and the efficient use of resources.

California Prop 65 Warning To meet the requirements of California Proposition 65, it is our responsibility to inform you of the following:

Warning Some products sold contain chemicals known to the state of California to cause cancer, birth defects, or other reproductive harm. For more information, please go to www.P65Warnings.ca.gov

ndspro.com Download our A Proud Member of NDS Customer Service Mobile App - Search 851 N. Harvard Ave., Lindsay, CA 93247 for NDS Drainage Phone: 800.726.1994 · 559.562.9888 Press 2 for Customer Service or 3 for Technical Support Fax: 800.726.1998 · 559.562.4488 Se Habla Español

Visit ndspro.com for:

Tools/ Case Design Request Videos Calculators Downloads Studies Worx a Quote