Refrigerator

KSV..

en Instruction for Use Refrigerator 3 en Table of Contents Safety and warning information ...... 3 Interior fittings ...... 12 Information concerning disposal ...... 6 Sticker “OK” ...... 12 Scope of delivery ...... 6 Switching off and disconnecting the Installation location ...... 7 appliance ...... 12 Ambient temperature and ventilation . 7 Cleaning the appliance ...... 13 Connecting the appliance ...... 8 Light (LED) ...... 13 Getting to know your appliance ...... 9 Tips for saving energy ...... 14 Switching the appliance on ...... 9 Operating noises ...... 14 Setting the temperature ...... 10 Eliminating minor faults yourself ...... 15 Usable capacity ...... 10 Appliance self-test ...... 16 Refrigerator compartment ...... 10 Customer service ...... 16 Super cooling ...... 11 en enTable of ContentsenInstruction for UseRefrigerator If damage has occurred

Safety and warning ■ Keep naked flames and/or information ignition sources away from the appliance,

Before you switch ON the ■ thoroughly ventilate the room appliance for several minutes,

Please read the operating and ■ switch off the appliance and installation instructions carefully! pull out the mains plug, They contain important ■ inform customer service. information on how to install, use and maintain the appliance. The more refrigerant an appliance contains, the larger The manufacturer is not liable if the room must be in which the you fail to comply with the appliance is situated. Leaking instructions and warnings. refrigerant can form a Retain all documents for flammable gas-air mixture in subsequent use or for the next rooms which are too small. owner. The room must be at least 1 m³ per 8 g of refrigerant. The Technical safety amount of refrigerant in your Fire hazard appliance is indicated on the The tubes of the rating plate inside the appliance. refrigeration circuit convey a When installing the appliance, small quantity of an ensure that the mains cable is environmentally friendly but not trapped or damaged. flammable refrigerant (R600a). It If the power cord of this does not damage the ozone appliance is damaged, it must layer and does not increase the be replaced by the greenhouse effect. If refrigerant manufacturer, Customer Service escapes, it may injure your eyes or a similarly qualified person. or ignite. Improper installations and repairs may put the user at considerable risk.

3 en

Repairs may be performed by ■ Do not use additional means the manufacturer, customer to accelerate the defrosting service or a similarly qualified process other than those person only. recommended by the Only original parts supplied by manufacturer. Risk of the manufacturer may be used. explosion! The manufacturer guarantees ■ Do not use pointed or sharp- that only these parts satisfy the edged implements to remove safety requirements. frost or layers of ice. You Do not use multiple sockets, might damage the refrigerant extension leads or adapters. tubes.Leaking refrigerant may Fire hazard cause eye injuries or ignite. Portable multiple outlets or ■ Do not store products which power supplies may overheat, contain flammable propellant causing a fire. (e.g. spray cans) or explosive Never leave portable multiple substances in the appliance. outlets or portable power Risk of explosion! supplies behind the appliance. ■ Do not stand on or lean heavily against the base of the Important information when appliance, drawers, doors, using the appliance etc. ■ For defrosting and cleaning, ■ Never use electrical appliances inside the pull out the mains plug or appliance (e.g. heaters, switch off the fuse. Do not pull electric ice makers, etc.). Risk out the mains plug by tugging of explosion! on the power cord. ■ Store high-percentage alcohol ■ Never defrost or clean the appliance with a steam tightly sealed and in an cleaner! The steam may upright position. penetrate electrical parts and ■ Keep plastic parts and the cause a short-circuit. Risk of door seal free of oil and electric shock! grease. Otherwise, plastic parts and the door seal will become porous.

■ Never cover or block the ventilation openings of the appliance.

4 en

■ Avoiding placing children Children in the household and vulnerable people at ■ Keep children away from risk: packaging and its parts. At risk here are children, Danger of suffocation from people who have limited folding cartons and plastic physical, mental or sensory film! abilities, as well as people ■ Do not allow children to play who have inadequate with the appliance! knowledge concerning safe operation of the appliance. ■ If the appliance features a lock: Check that children and keep the key out of the reach vulnerable people have of children! understood the hazards. A person responsible for General regulations safety must supervise or The appliance is suitable for instruct children and refrigerating food. vulnerable people who are using the appliance. This appliance is intended for use in the home and the home Only children aged 8 years environment. and above may use the appliance. The refrigeration circuit has been checked for leaks. Supervise children while the appliance is being cleaned or This appliance complies with the maintained. relevant safety regulations for electrical appliances and is Never allow children to play fitted with noise suppression. with the appliance. This appliance is intended for use up to a maximum height of 2000 metres above sea level.

5 en

m Warning Information concerning Redundant appliances disposal 1. Pull out the mains plug. 2. Cut off the power cord and discard * Disposal of packaging with the mains plug. The packaging protects your appliance 3. Do not take out the trays from damage during transit. All utilised and receptacles: children are materials are environmentally safe and therefore prevented from climbing in! recyclable. Please help us by disposing 4. Do not allow children to play with of the packaging in an environmentally the appliance once it has spent its friendly manner. useful life. Danger of suffocation! Please ask your dealer or inquire at your local authority about current means of Refrigerators contain refrigerant disposal. and gases in the insulation. Refrigerant and gases must be disposed of professionally. Ensure that tubing * Disposal of your old of the refrigerant circuit is not damaged appliance prior to proper disposal. Old appliances are not worthless rubbish! Valuable raw materials can be reclaimed by recycling old appliances. Scope of delivery This appliance is labelled in accordance with European After unpacking all parts, check for any Directive 2012/19/EU concerning damage in transit. used electrical and electronic If you have any complaints, please appliances (waste electrical and contact the dealer from whom you electronic equipment - WEEE). purchased the appliance or our The guideline determines the customer service. framework for the return and The delivery consists of the following recycling of used appliances as parts: applicable throughout the EU. ■ Free-standing appliance ■ Interior fittings (depending on model) ■ Bag containing installation materials ■ Operating instructions ■ Installation manual ■ Customer service booklet ■ Warranty enclosure ■ Information on the energy consumption and noises

6 en

Note Installation location If the appliance is placed on its back, ensure that the wall spacer is not fitted. A dry, well ventilated room is suitable as an installation location. The installation location should not be exposed to direct sunlight and not placed near a heat Ambient temperature source, e.g. a cooker, radiator, etc. If installation next to a heat source is and ventilation unavoidable, use a suitable insulating plate or observe the following minimum Ambient temperature distances from the heat source: The appliance is designed for a specific ■ 3 cm to electric or gas cookers. climate class. Depending on the climate class, the appliance can be operated at ■ 30 cm to an oil or coal-fired cooker. the following temperatures. The floor of the installation location must The climate class can be found on not give way; if required, reinforce floor. If the rating plate. Fig. the floor is uneven, compensate with / supports. Climate class Permitted ambient temperature Distance from wall SN +10 °C to 32 °C Fig. # N +16 °C to 32 °C A gap is not required between the ST +16 °C to 38 °C appliance and side wall. The containers T +16 °C to 43 °C and shelves are still fully extendable. Note The appliance is fully functional within Reversing the door the room temperature limits (if required) of the indicated climatic class. If If required, we recommend that you have an appliance of climatic class SN the door hinges changed over by our is operated at colder room temperatures, customer service. You can find out the the appliance will not be damaged up to costs for changing over the door hinges a temperature of +5 °C. from your appropriate customer service. Ventilation Warning m Fig. $ While changing over the door hinges, The air on the rear ensure that the appliance is not panel of the appliance heats up. connected to the power supply. Pull out Conduction of the heated air must the mains plug beforehand. To prevent not be obstructed. Otherwise, damaging the back of the appliance, the refrigerating unit must work harder. place adequate padding underneath. This increases power consumption. Carefully place the appliance on its Therefore: Never cover or block back. the ventilation openings!

7 en

The appliance complies with protection Connecting class I. Connect the appliance to 220– 240 V/50 Hz alternating current via a the appliance correctly installed socket with protective conductor. The socket must be protected After installing the appliance, wait at least by a 10 A to 16 A fuse. 1 hour until the appliance is switched on. During transportation the oil in For appliances operated in non- the compressor may have flowed into European countries, check whether the the refrigeration system. indicated voltage and current type match the values of your electricity supply. This Before switching on the appliance for information can be found on the rating the first time, clean the interior of plate, Fig. /. the appliance (see chapter “Cleaning the appliance”). m Warning Never connect the appliance Electrical connection to electronic energy saver plugs. The socket must be near the appliance Our appliances can be used with mains and also freely accessible following and sine-controlled inverters. Mains- installation of the appliance. controlled inverters are used for photovoltaic systems which m Warning are connected directly to the national Risk of electric shock! grid. Sine-controlled inverters must be If the length of the mains cable is used for isolated applications (e.g. on inadequate, never use multiple sockets ships or in mountain lodges) which are or extension leads. Instead, please not connected directly to the national contact Customer Service for grid. alternatives.

8 en Controls Getting to know your Fig. " appliance 1 On/Off button Serves to switch the appliance on and off. 2 Temperature display The numbers correspond to the set refrigerator compartment temperatures in °C. 3 “super” display Illuminates, if the super cooling is Please fold out the illustrated last page. in operation. These operating instructions refer 4 Temperature selection button to several models. Press this button to set the The features of the models may vary. temperature. The diagrams may differ. Fig. ! * Not all models. Switching the 1–4 Controls appliance on 5 Light (LED) Fig. " 6 Glass shelf Switch on the appliance with the On/Off 7 Condensation outlet button 1. 8 Vegetable container The temperature display 2 indicates the 9 Height-adjustable feet set temperature. 10* Butter and cheese compartment The appliance begins to cool. Light is 11 Door shelf switched on when the door is open. 12 Egg rack We recommend a factory setting of +4 13* Door shelf “EasyLift” °C in the refrigerator compartment. 14 Shelf for large bottles Do not store perishable food warmer than +4 °C.

9 en Operating tips

■ While the refrigeration unit is running, Usable capacity water droplets or a thin layer of ice Information on the usable capacity can may form at the rear panel of be found inside your appliance on the refrigerator. This is nothing the rating plate. Fig. / unusual. It is not necessary to scrape off the frost or wipe off the water droplets. The rear panel defrosts automatically. The condensation Refrigerator collects in the condensation channel and is carried to the refrigeration unit compartment where it evaporates. The refrigerator compartment is the ideal ■ If the air humidity is high, storage location for meat, sausage, fish, condensation may form dairy products, eggs, ready meals in the refrigerator compartment, and pastries. especially on the glass shelves. If this is the case, pack or wrap the food Storing food and select a lower temperature in the refrigerator compartment. ■ Store fresh, undamaged food. The quality and freshness will then be retained for longer. ■ In the case of ready-made products Setting and bottled goods, observe the best- the temperature before date or use-by date specified by the manufacturer. Fig. " ■ To retain aroma, colour The temperature can be set from +2 °C and freshness, pack or cover food to +8 °C. well before placing in the appliance. Keep pressing temperature setting This will prevent the transfer button 4 until the required refrigerator of flavours and the discolouration compartment temperature is set. of plastic parts in the refrigerator The value last selected is saved. The set compartment. temperature is indicated on the ■ Allow warm food and drinks to cool temperature display 2. down before placing in the appliance. Note Avoid contact between food and rear panel. Otherwise the air circulation will be impaired. Food or packaging could freeze to the rear panel.

10 en

Note the chill zones Notes in the refrigerator ■ Fruit sensitive to cold (e.g. pineapple, compartment banana, papaya and citrus fruit) and vegetables sensitive to cold (e.g. The air circulation in the refrigerator aubergines, cucumbers, zucchini, compartment creates different chill peppers, tomatoes and potatoes) zones: should be stored outside ■ Coldest zone is between the arrow the refrigerator at temperatures stamped on the side and the glass of approx. +8 °C to +12 °C for shelf situated below. Fig. % optimum preservation of quality and flavour. Note ■ Condensation may form in the Store perishable food (e.g. fish, vegetable container depending on the sausage, meat) in the coldest zone. type and quantity of products stored. ■ Warmest zone is at the very top Remove condensation with a dry cloth of the door and in the vegetable and adjust air humidity in the container. vegetable container with the humidity controller. Note Store at the very top of the door e.g. hard cheese and butter. Cheese can then continue to release its flavour Super cooling and the butter will still be easy to spread. Super cooling sets the refrigerator temperature to the coldest temperature Vegetable container with setting for approx. 15 hours. Then the appliance automatically switches humidity controller to the temperature set prior to super Fig. & cooling mode. To create the optimum storage climate Switch on super cooling mode, e.g. for fruit and vegetables, you can set the air humidity in the vegetable container ■ before placing large quantities of food depending on the quantity stored: in the refrigerator compartment. ■ for the fast cooling of drinks. ■ smaller quantities of fruit and vegetables – high air humidity Note ■ large quantities of fruit and vegetables When super cooling is switched on, – low air humidity increased operating noises may occur.

Switching on and off Fig. " Keep pressing the temperature setting button 4 until the super indicator 3 is lit.

11 en

Interior fittings Sticker “OK” (not all models) (not all models) The sticker “OK” lets you check whether Glass shelves the refrigerator compartment achieves Fig. ' the safe temperature ranges of +4 °C or If required, you can vary the shelves colder recommended for food. If the inside the appliance: To do this, pull out sticker does not indicate “OK”, gradually shelf, lift at the front and take out. reduce the temperature. Note Adjustable “EasyLift” door When the appliance is switched on, it shelf may take up to 12 hours until the set temperature is reached. Fig. ( The height of the shelf can be adjusted without taking it out. Simultaneously press side buttons on the shelf to move the shelf downwards. It Correct setting can be moved upwards without pressing the buttons.

Door shelf Switching off and Fig. ) disconnecting the Lift shelf upwards and take out. appliance

Bottle shelf Turn off appliance Fig. * A/B Fig. " Bottles can be stored securely on the bottle shelf. The holder can be Press the On/Off button 1. adjusted. Temperature display 2 goes out, refrigeration unit switches off. Breakfast set Disconnecting the appliance Fig. + The containers for the breakfast set can If you do not use the appliance be taken out and filled individually. for a prolonged period: 1. Switch off the appliance. Bottle holder 2. Pull out mains plug or switch off fuse. Fig. , 3. Clean the appliance. The bottle holder prevents bottles from 4. Leave the appliance door open. falling over when the door is opened and closed.

12 en Interior fittings Cleaning the appliance All variable parts of the appliance can be taken out for cleaning. m Caution Take out glass shelves ■ Do not use abrasive, chloride or acidic Fig. ' cleaning agents or solvents. To do this, pull out shelf, lift at the front ■ Do not use scouring or abrasive and take out. sponges. The metallic surfaces could Take out shelves in the door corrode. Fig. ) ■ Never clean shelves and containers Lift shelves upwards and take out. in the dishwasher. The parts may Condensation channel become deformed! Fig. - Proceed as follows: Regularly clean the condensation 1. Before cleaning: Switch off channel and drainage hole with a cotton the appliance. bud or similar implement to ensure that the condensation can drain. 2. Pull out the mains plug or switch off the fuse! Removing the container Fig. . 3. Take out the food and store in a cool location. Pull out the container all the way, lift at the front and remove. 4. Wait until the layer of frost has thawed. 5. Clean the appliance with a soft cloth, lukewarm water and a little pH neutral washing-up liquid. The rinsing water Light (LED) must not run into the light. Your appliance features a maintenance- 6. Wipe the door seal with clear water free LED light. only and then wipe dry thoroughly. These lights may be repaired 7. Rinsing water must not run through by customer service or authorised the drainage hole into the evaporation technicians only. area. 8. After cleaning reconnect and switch the appliance back on. 9. Put the food back into the appliance.

13 en

Tips for saving energy Operating noises

■ Install the appliance in a dry, well ventilated room! The appliance should Quite normal noises not be installed in direct sunlight Droning or near a heat source (e.g. radiator, Motors are running (e.g. refrigerating cooker). units, fan). If required, use an insulating plate. Bubbling, humming or gurgling noises Refrigerant is flowing through the tubing. ■ Allow warm food and drinks to cool down before placing in the appliance. Clicking Motor, switches or solenoid valves are ■ Open the appliance as briefly as possible. switching on/off. ■ To avoid increased power consumption, occasionally clean the Preventing noises back of the appliance. The appliance is not level Please align the appliance with a spirit ■ If available: level. Use the height-adjustable feet Fit wall spacers to obtain the indicated or place packing underneath them. energy rating of the appliance (see Installation instructions). A reduced The appliance is not free-standing wall gap will not restrict the function Please move the appliance away of the appliance. The energy rating from adjacent units or appliances. may then increase slightly. The gap Containers or storage areas wobble of 75 mm must not be exceeded. or stick Please check the removable parts ■ The arrangement of the fittings does not affect the energy rating of the and re-insert them correctly if required. appliance. Bottles or receptacles are touching each other Move the bottles or receptacles slightly away from each other.

14 en

Eliminating minor faults yourself Before you call customer service: Please check whether you can eliminate the fault yourself based on the following information. Customer service will charge you for advice – even if the appliance is still under guarantee!

Fault Possible cause Remedial action Temperature differs greatly In some cases it is adequate to switch off from the set value. the appliance for 5 minutes. If the temperature is too high wait a few hours and check whether the temperature has approached the set value. If the temperature is too low check the temperature again the next day. Displays do not illuminate. Power failure; the fuse has Connect mains plug. Check whether the power been switched off; the mains is on, check the fuses. plug has not been inserted properly. The light does not function. The LED light is defective. See chapter “Light (LED)” section. Appliance was open too When the appliance is closed and opened, long. the light is on again. Light is switched off after approx. 10 min. Bottom of the refrigerator The condensation channel Clean the condensation channel compartment is wet. or drainage hole are blocked. and the drainage hole. See chapter Cleaning the appliance. Fig. - The refrigerating unit Appliance opened Do not open the appliance unnecessarily. is switching on more frequently. frequently and for longer. The ventilation openings Remove obstacles. have been covered. Appliance is not cooling, Showroom mode is Hold down temperature selection button temperature display and light switched on. fig. "/4 for 10 seconds until are lit. an acknowledgement signal sounds. After a short time check whether your appliance is cooling.

15 en

Appliance self-test Customer service Your appliance features an automatic Your local customer service can be self-test program which shows you found in the telephone directory or in sources of faults which may be repaired the customer-service index. Please by customer service only. provide customer service with the appliance product number (E-Nr.) and Starting the appliance self-test production number (FD-Nr.). Fig. " This information can be found on the rating plate. Fig. / 1. Switch off the appliance with the On/ To prevent unnecessary call-outs, please Off button 1 and wait 5 minutes. assist customer service by quoting 2. Switch on the appliance with the On/ the product and production numbers. Off button 1 and hold down This will save you additional costs. the temperature setting button 4 for 3- 5 seconds within the first 10 seconds Repair order and advice until 2 °C is lit on the temperature display 2. on faults The self-test programme starts, when Contact information for all countries can the temperature displays lit up in be found on the enclosed customer succession. service list. When after a short time the appliance GB 0344 892 8979 Calls charged at displays the set temperature prior to the local or mobile rate. self-test, everything is ok. IE 01450 2655 0.03 € per minute If the super display 3 flashes for 10 at peak. Off peak seconds, an error has occurred. 0.0088 € per Inform customer service. minute. US 800 944 2904 toll-free Ending the appliance self-test When the programme has ended, the appliance switches over to normal operation.

16 

 

  





 



!

" #$

%&

'( )*/A

*/B +

,- E - Nr

./ *8001135926*

8001135926 (9809) en