CEMENTEXCEMENTEX PUTSPUTS THETHE HIGHESTHIGHEST STANDARDSTANDARD OFOF SAFETYSAFETY ININ YOURYOUR HANDS.HANDS.

PRODUCTS INC.

SINCE 1956 1000V INSULATED PRODUCTS

CEMENTEX

TOOL KITS . . . page 5

SERVICE ROLLS . . . page 9

SCREWDRIVERS & NUTDRIVERS . . . page 11

PLIERS . . . page 12 . . . page 13

2•www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442

DOING THE JOB SAFELY IS WHAT WE ARE ALL ABOUT.

SOCKETS & RATCHETS . . . PAGE 15 HANDY . . . PAGE 14

INSULATED GLOVES . . . page 16

PPE . . . page 18

PROTECTIVE CLOTHING . . . page 19

www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442 • 3 KITS

DELUXE KIT WITH WHEELS MRO SUPER KIT CATALOG # CODE # ITS-60B 13407 ITS-60B/T* 13408

DELUXE MRO SUPER KIT CATALOG # CODE # ITS-60B-DLX 13409 ITS-60B-DLX-W 13411 ITS-60B/T* 13410 ITS-60B/T-DLX-W* 13412

* (includes torque )

CONTENTS: • 9/64” x 2” Slotted • 9” Linesman’s • 3/8” Drive x 6” Extension • 3/16” x 4-1/2” Slotted Screwdriver, • 8” Needle Nose Pliers • 10 pcs. 5/16” to 7/8” Socket Set Cushion Grip • 7-1/2” Diagonal Pliers • 11 pcs. 3/8” to 1” Box End Wrench Set • 3/16” x 6” Slotted Screwdriver, • 9-1/2” Diagonal Pliers • 3/16” x 6” B/E Nutdriver, Cushion Grip Cushion Grip • 10” Water Pump Pliers • 1/4” x 6” B/E Nutdriver, Cushion Grip • 1/4” x 6” Slotted Screwdriver, Cushion Grip • Combination Stripper/Crimper Pliers • 11/32” x 6” B/E Nutdriver, Cushion Grip • 5/16” x 6” Slotted Screwdriver, • 14 pcs. 1/16” to 1/2” Long Arm Hex • 3/8” x 6” B/E Nutdriver, Cushion Grip Cushion Grip Wrench Set • 7/16” x 6” B/E Nutdriver, Cushion Grip • #2 x 4” Phillips Screwdriver, Cushion Grip • 3/8”Drive Reversible Ratchet • 1/2” x 6” B/E Nutdriver, Cushion Grip • #2 x 8” Phillips Screwdriver, Cushion Grip • 3/8” Drive x 3” Extension • 30” - 150”

DELUXE MAINTENANCE KIT CATALOG # CODE # ITS-MB430 11430 ITS-MB431* 11431 CONTENTS: • 9/64” x 2” Slotted Screwdriver • 3/16” x 4-1/2” Slotted Screwdriver, Cushion Grip • 1/4” x 6” Slotted Screwdriver, Cushion Grip • #1 x 3” Phillips Screwdriver, Cushion Grip • #2 x 4” Phillips Screwdriver, Cushion Grip • 9” Linesman’s Pliers • 8” Needle Nose Pliers • 7-1/2” Diagonal Pliers • 3/8”Drive Reversible Ratchet • 3/8” Drive x 3” Extension • 3/8” Drive x 6” Extension • 8pcs. 3/8” to 13/16” 3/8” Dr. DW Sockets - 12 pt. • 8pcs. 3/8” to 13/16” Box End Wrench Set • 30” - 150” Torque Wrench • Mini

*8 Pc. Geared, Box Wrench Set

4• www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442 COMPLETE KITS TO DO THE JOB SAFELY.

ELECTRICIAN TOOL SET 30PC. CATALOG # CODE # ITS-30B 13406 ITS-30B-SC 13415

CONTENTS: • 1/4” x 4-1/2” Mechanics Screwdriver, Cushion Grip • 5/16” x 6” Mechanics Screwdriver, Cushion Grip • 3/8” x 8” Mechanics Screwdriver, Cushion Grip • 3/16” x 4-1/2” Slotted Screwdriver, Cushion Grip • 3/16” x 6” Slotted Screwdriver, Cushion Grip • 1/4” x 6” Slotted Screwdriver, Cushion Grip • #1 x 3” Phillips Screwdriver, Cushion Grip • #2 x 4” Phillips Screwdriver, Cushion Grip • 3/16” x 2-1/2” Nutdriver, Cushion Grip • 1/4” x 2-1/2” Nutdriver, Cushion Grip • 5/16” x 2-1/2” Nutdriver, Cushion Grip • 11/32” x 2-1/2” Nutdriver, Cushion Grip • 3/8” x 2-1/2” Nutdriver, Cushion Grip • 3/8” x 6” T-Handle Hex Wrench • 9-1/2” Cable Cutting Pliers • 7/16” x 2-1/2” Nutdriver, Cushion Grip • 7/16” x 6” T-Handle Hex Wrench • 10” Water Pump Pliers • 1/2” x 2-1/2” Nutdriver, Cushion Grip • 1/2” x 6” T-Handle Hex Wrench • 12” Water Pump Pliers • 3/16” x 6” T-Handle Hex Wrench • 9” Linesman’s Pliers • 10” Crimping Pliers • 1/4” x 6” T-Handle Hex Wrench • 8” Needle Nose Pliers • 8” • 5/16” x 6” T-Handle Hex Wrench • 7-1/2” Diagonal Pliers • 6” Flat Nose Pliers

ELECTRICIAN TOOL KIT CATALOG # CODE # ITS-MB410 11410 CONTENTS: • 9” Linesman’s Pliers • 7-1/2” Diagonal Pliers • 7” Needle Nose Pliers • 9/64” x 2” Slotted Screwdriver, Cushion Grip • 3/16” x 4-1/2” Slotted Screwdriver, Cushion Grip • 1/4” x 6” Slotted Screwdriver, Cushion Grip • #1 x 3” Phillips Screwdriver, Cushion Grip • #2 x 4” Phillips Screwdriver, Cushion Grip • Mini Flashlight • 1/2” dr Reversible Ratchet • 12” dr x 5” Ext. Bar • 1/2” dr x 10” Ext. Bar • Sockets: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, & 3/4”

www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442 • 5 TOOL KITS

BASIC TOOL SET - 23 TOOLS PLUS BOX

CATALOG # CODE # ITS-24B 13405 CONTENTS: • 9” Linesman’s Pliers • 6” Diagonal Pliers • 6” Needle Nose Pliers • 8” Slip Joint Pliers • 10” Crimping Pliers • 10” Water Pump Pliers • 3/16” x 4-1/2” Electrician Slotted Screwdriver • 1/4” x 6” Electrician Slotted Screwdriver • 1/4”x 4-1/2” Mechanics Slotted Screwdriver • 5/16”x 6” Mechanics Slotted Screwdriver • #1 x 3” Phillips Screwdriver • #2 x 4” Phillips Screwdriver • 3/16”, 1/4”, 3/8”, 7/16”, 1/2” Long Arm Hex Wrench • 1/4”, 5/16”, 3/8”, 7/16” & 1/2” Nutdrivers w/ 2-1/2” Shaft

MAINTENANCE TOOL KIT

CATALOG # CODE # ITS-MB420 11420 CONTENTS: • 9” Linesman’s Pliers • 7-1/2” Diagonal Cutting Pliers • 7” Needle Nose Pliers • 9/64” x 2” Slotted Screwdriver • 3/16” x 4-1/2” Slotted Screwdriver, Cushion Grip • 1/4” x 6” Slotted Screwdriver, Cushion Grip • #1 x 3” Phillips Screwdriver, Cushion Grip • #2 x 4” Phillips Screwdriver, Cushion Grip • Mini Flashlight • 1/2” dr Reversible Ratchet • 12” dr x 5” Ext. Bar • Sockets: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, & 3/4” • Open End Wrenches: 3/8”, 7/16”, 1/2”, 9/16”, 5/8”, 11/16”, & 3/4”

TELECOMMUNICATIONS TOOL KIT

CATALOG # CODE # TCK-101 13441 CONTENTS: • 9” Linesman’s Pliers • 6” Needle Nose Pliers • 3/16” x 4-1/2” Cab. Slotted Screwdriver • 1/4”x 4-1/2” Mechanics Slotted Screwdriver • 5/16”x 6” Mechanics Slotted Screwdriver • 3/8”x 10” Mechanics Slotted Screwdriver • #2 x 4” Phillips Screwdriver • 3/8” Drive Reversible Ratchet • 3/8” dr x 3” Extension • 3/8” Drive Sockets Sizes: 3/8”, 7/16”, 1/2” & 9/16” • 3/8” Drive DW Socket: 5/8”30”-150” Torque Wrench

• Custom Tool Cases Available

6•www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442 TOOL SETS TIGHTEN UP ON SAFETY WITH OUR SETS.

SOCKET SETS

CATALOG # CODE # DESCRIPTION PCS. ISS14-13 11190 1/4” dr Ratchet, 3” & 6” Ext. Bars 13 Sockets: 3/16” thru 9/16” 6 pt. ISS14-13L 11191 1/4” dr Ratchet, 3” & 6” Ext. Bars 13 DW Sockets: 3/16” thru 9/16” 6 pt. ISS38-11 11197 3/8” dr Ratchet, 3” & 6” Ext. Bars 11 Sockets: 3/8” thru 13/16” 12 pt. ISS38-11L 11199 3/8” dr Ratchet, 3” & 6” Ext. Bars 11 DW Sockets: 3/8” thru 13/16” 12 pt. ISS12-12 11208 1/2” dr Ratchet, 5” & 10” Ext. Bars 12 Sockets: 1/2” thru 1” 12 pt. ISS12-12L 11210 1/2” dr Ratchet, 5” & 10” Ext. Bars 12 DW Sockets: 1/2” thru 1” 12 pt.

6 or 12 Point Sockets • Metric Sets • Custom Sets

HEX WRENCH SETS

CATALOG # CODE # DESCRIPTION PCS. HKS-8T 16110 T-Handle Hex Wrench Set 8 Sizes: 1/8” thru 9/16” HKS-12T 16112 T-Handle Hex Wrench Set 12 Sizes: 3/32” thru 1/2” HWS-8L 16128 Long Arm Hex Wrench Set 8 Sizes: 1/8” thru 1/2” HWS-14L 16130 Long Arm Hex Wrench Set 14 Sizes: 1/16” thru 1/2”

• Metric Sets • Custom Sets Also available in “T” handle as shown on page 9.

LONG REACH ELECTRONIC MINI PLIERS & SET

CATALOG # CODE # DESCRIPTION EP-OD5 19100 Oval Head Diagonal EP-CN6 19101 Chain Nose w/Cutter EP-NN7 19102 Thin Needle Nose EP-FN6 19103 Flat Nose EP-TD5 19104 Thin Diagonal EP-BN6 19105 Bent Needle Nose EP-ZP 19106 Zippered Pouch EP-7PK 19107 7 pc. Mini Plier Set

www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442 • 7 WRENCH SETS SHOCK PROTECTION TAKES A TURN FOR THE BETTER.

GEARED BOX WRENCH SETS Ideal for accessing tight work areas to confining for a standard socket and ratchet combination. Ratchet engages with as little as 5° of arc. Continuous contact with fastener provides for smooth and efficient operation than the repositioning required with a standard box wrench. 8 PIECE WRENCH SET

CATALOG # CODE # IGRBW-8 11320

SIZES: 3/8”, 7/16”, 1 /2”, 9/16”, 5/8”, 11/16”, 3/4” &13/16”

• Metric Sets • Custom Sets

11 PIECE WRENCH SET

CATALOG # CODE # BOX END - IBEWS-11 11305 OPEN END - IOEWS-11 11315

SIZES: 3/8”, 7/16”, 1 /2”, 9/16”, 5/8”, 11/16”, 3/4”, 13/16”, 7/8”, 15/16” & 1”

• Metric Sets • Custom Sets

8 PIECE WRENCH SET

CATALOG # CODE # BOX END - IBEWS-8 11300 OPEN END - IOEWS-8 11310

SIZES: 3/8”, 7/16”, 1 /2”, 9/16”, 5/8”, 11/16”, 3/4” &13/16”

• Metric Sets • Custom Sets

8•www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442 TOOL KITS & ROLLS TOOL KITS & ROLLS THAT PACKAGE GREATER SAFETY.

BASIC ELECTRICIAN’S SERVICE ROLL (9 PCS.)

CATALOG # CODE # TR-9ELK 13456 CONTENTS: • 9” Linesman’s Pliers • 7-1/2” Diagonal Cutting Pliers • 7” Needle Nose Pliers • Combination Stripper & Crimper • 3/16 x 4-1/2” Slotted Screwdriver, Cushion Grip • 3/16 x 6” Slotted Screwdriver, Cushion Grip • 1/4” x 6” Slotted Screwdriver, Cushion Grip • #1 x 3” Phillips Screwdriver, Cushion Grip • #2 x 4” Phillips Screwdriver, Cushion Grip

• Custom Tool Cases Available

METER READER ROLL ( 10 PCS.)

CATALOG # CODE # TR-10MRK 13445 CONTENTS: • 8” Needle Nose Pliers • Fuse Puller • Plug Wrench • 3/16”x 6” Slotted Screwdriver, Cushion Grip • 1/4” x 6” Slotted Screwdriver, Cushion Grip • #1 x 3” Phillips Screwdriver, Cushion Grip • #2 x 4” Phillips Screwdriver, Cushion Grip • 5/16” Nutdriver, Cushion Grip • 3/8” Nutdriver, Cushion Grip • 1/2” Nutdriver, Cushion Grip

• Custom Tool Cases Available

T-HANDLE & LONG ARM HEX WRENCH KITS Including the NEW ergonomically enhanced “T” handle for more comfortable use. 8 piece through 14 piece kits available in both SAE & metric sizes

www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442 • 9 SERVICE ROLLS SERVICE ROLLS THAT ARE ENGINEERED FOR JOB PROTECTION.

PLIER & CRIMPER/STRIPPER KIT (7 PCS.)

CATALOG # CODE # TR-8PCSK 13448 CONTENTS: • 9” Linesman’s Pliers • 7-1/2” Diagonal Cutting Pliers • 7” Needle Nose Pliers • Combination Stripper & Crimper • Crimping Tool • Fuse Puller • Plastic Pliers

• Custom Tool Cases Available

GAS SERVICE ROLL (11 PCS.)

CATALOG # CODE # TR-11GSK 13447 CONTENTS: • 8” Linesman’s Pliers • 7-1/2” Diagonal Cutting Pliers • 8” Needle Nose Pliers • 9/64” x 2” Slotted Screwdriver • 3/16 x 4-1/2” Slotted Screwdriver, Cushion Grip • 1/4” x 6” Screwdriver, Cushion Grip • 5/16” Nutdriver, Cushion Grip • 3/8” Nutdriver, Cushion Grip • 1/2” Nutdriver, Cushion Grip • Fuse Puller • Plug Wrench

• Custom Tool Cases Available

METER SERVICE ROLL (12 PCS.)

CATALOG # CODE # TR-12MRSK 13446 CONTENTS: • 9” Linesman’s Pliers • 7-1/2” Diagonal Cutting Pliers • 8” Needle Nose Pliers • 9/64” x 2” Slotted Screwdriver • 3/16 x 4-1/2” Slotted Screwdriver, Cushion Grip • 3/16 x 6” Slotted Screwdriver, Cushion Grip • 1/4” x 6” Screwdriver, Cushion Grip • 5/16” Nutdriver, Cushion Grip • 3/8” Nutdriver, Cushion Grip • 1/2” Nutdriver, Cushion Grip • Fuse Puller • Plug Wrench

• Custom Tool Cases Available

10 • www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442 & NUT DRIVERS TIGHTEN UP YOUR OSHA STANDARDS WITH OUR DRIVERS.

MECHANIC TIP 7/32” to 3/8” in Lengths to 10”

CABINET TIP 9/64” to 1/4” in lengths from 1-3/4” to 6”

SCREWDRIVER ROLL PHILLIPS HEAD 6 pc. & 8 pc. • Custom #1 thru #3 in lengths from 1” to 8”

MAGNETIC TIP SCREWDRIVER

ANGLE NUTDRIVERS 1/2” to 3/4” NUTDRIVER ROLL 6 pc. & 8 pc. / 3” & 6” lengths • Custom

NUT DRIVERS 3/16” to 5/8” in lengths from 3” to 6”

SCREW HOLDERS Grips, seats, and removes in and around hard SCREWDRIVER & NUTDRIVER ROLL to reach locations. Spring loaded tip holds screw firmly for seating and removal. Releases with a twist. 12 pcs. includes Roll Available in flat or Phillips tip.

• All tools are double-insulated, tested to 10,000 VAC / 1500 VDC for Protection of People, Property and Productivity. • SEE ILLUSTRATED PRICE LIST FOR DETAILS. www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442 • 11 PLIERS GET A GRIP ON THE JOB WITH OUR SAFETY PLIERS.

DUCK BILL CURVED NEEDLE DIAGONAL WIRE STRIPPERS Smooth jaws with NEEDLE NOSE NOSE Heavy duty for State-of-the-art wire strippers wide flat gripping An excellent tool for Perfect for looping, thicker gauge wire. for solid or stranded wire. area. confined work areas cutting and forming and reaching between wire. Cutting edges assemblies. are induction hard- ened for long life.

LINESMAN UNIVERSAL CABLE CABLE CUTTING PLIERS High leverage design LINESMAN SCORING TOOL High leverage cutters with shear type blades for for increased cutting With crossover cut- Used to cut through cutting 100 pair telephone cable, 4/0 aluminum, and gripping power. ter, crimper, cross- exterior cable insula- and 2/0 copper. Cutter with ring meets Bell spec New England styled hatched jaws for tion to facilitate strip- number R3371D2. head for easier access gripping and low ping. Used extensively to tight areas. profile head – good on older under- Cutting edges induc- choice for limited ground systems with tion hardened for access areas. Lighter lead sheathed wire. extended life. in weight for greater Available with or PLASTIC PLIERS operator comfort without insulation. and control. Cutting edges heat Designed as a gripping tool to move and position treated to RC 42-45. wires and remove loose material from tight work areas. Grooved jaws for positive grip. Large han- dles and integral finger guards provide control and safety. Reinforced fiberglass is non-conductive.

CRIMPING Two tools in one. Crimps solderless ter- minals and connectors ranging from #10 to 22 AWG. Also has wire cutter SLIP JOINT built into base. These pliers have milled teeth and jaws WATER PUMP to provide positive gripping on a wide Available in 10 & 12 inch lengths variety of objects. with a maximum capacity of 2”.

• OSHA 1910.335 Safeguards for Personnel protection section (2) (i) . . . when working near exposed parts, each employee shall use insulated tools or handling equipment. • SEE ILLUSTRATED PRICE LIST FOR DETAILS.

12 • www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442 WRENCHES WRENCHES OF EVERY DESCRIPTION TO SIZE UP ANY JOB.

OPEN END RATCHETING BOX WRENCHES RATCHETING WRENCHES BOX WRENCHES Also available in SAE or “BUG” BOX Both SAE & Metric sizes In SAE & Metric from Metric from 1/4” to 3/4” WRENCHES available from 1/4” to 5/16” to 1” and 8mm to and 6mm to 32mm Available from 3/8” x 1-1/8” and 6mm to 19mm 7/16” to 3/4” x 7/8” 32mm

“T” HANDLE LONG ARM “T” HANDLE HEX WRENCH HEX WRENCH SOCKET WRENCH New ergonomically In SAE sizes from 1/16” Available in sizes from enhanced “T” handle to 1/2” and Metric 5/16” to 13/16” for more comfortable from 1.5mm to 24mm ADJUSTABLE WRENCHES use. Available in both New fully insulated adjustable SAE & Metric from 1/8” wrenches (8, 10 & 12”) meets ASTM to 9/16” and 2mm to Specification. Standard insulated 10mm wrenches from 6” to 15”

All Double-Insulated Tools are manufactured in accordance with prevailing Standards: ASTM F1505-01 and IEC 900 • SEE OUR ILLUSTRATED PRICE LIST FOR COMPLETE DETAILS www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442 • 13 HANDY TOOLS TOOLS TO MAKE THE TOUGH JOBS EASIER AND SAFER.

KNIVES Heavy duty tem- pered steel blade for line work. CUTTER Blade thru handle General purpose cutter with alloy steel design for added jaws and center cut blades for cutting leverage, control, materials with a maximum hardness and safety. Finger rating of Brinell 455/Rockwell C48. guards to pre- SECURE-A-TOOL LANYARD vent hand slip- Strong, convenient, safe. Prevents modified tools from being page and dropped accidentally from overhead work sites. Elastic cord blade cap interchangeable. Adjustable wrist wrap adjusts for comfort. for storage. *For tether-ready tools add “ST” to each part number. HACKSAW Welded steel frame has superior strength. 5-1/2” extra deep INSPECTION MIRROR throat. Handle design Moveable faces for offset viewing. 12” handle allows user to wear insu- lating rubber gloves and protectors. TAPE MEASURE Non-conductive fiberglass tape measure. SAE & metric dual scale. Plastic housing RATCHETING with manual rewind. For use in “live” CABLE CUTTER electrical panels, on bus bars, battery/ups; TUBE CUTTER Designed for cutting alu- and areas requiring measurements that Compact tubing cutter with extra- minum and MCM copper pose an electrical hazard. hard wheel and dual roller for cable. Cutting heads are fin- square cuts on most plastic tubing. ished in black oxide to mini- Maximum capacity is 1-1/2” OD. mize corrosion. On both tools a locking mechanism closes the handles for easy storage. CAUTION: DO NOT USE TO CUT STEEL.

UNIVERSAL TRIPOD & TUBE HOIST All aluminum construction with a 500# rated capacity. Standard mod- els equipped with 50’ of synthetic HOOK & PROBE SET braided rope. SS and Galvanized air- 4 Piece set with 4 steel point craft type cable is available. Each configurations; straight point 90 unit finished in Hi-Viz Yellow. bend, 45 bend, and hook bend. NONSPARKING TOOLS Tools of aluminum bronze for use in facilities NFPA 70E 2-3.7 Insulated Tool and Equipment: Employees shall use where flammable vapors or combustible residual insulted tools and/or handling equipment when working inside the material is present. In addition to being non- limited approach boundary of live parts where tools or handling sparking, these tools are non-magnetic and cor- equipment might make accidental contact. Insulated tools shall be rosion resistant. Refer to price list for selection protected from damage to the insulating material. and description. SAE and Metric sizes available. • SEE OUR ILLUSTRATED PRICE LIST FOR COMPLETE DETAILS.

14 • www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442 SOCKETS, RATCHETS & EXTENSIONS SAFETY AT EVERY TURN.

TORQUE WRENCHES Insulated torque wrenches for tighten- ing critical connections on bus bars, battery racks, and power dis- tribution panels. “Click-style” with an audible click and feel impulse; SOCKETS documented repeatable accu- Available in two styles: STANDARD – racy of +/-4%, Requires the use of an extension bar these tools pro- FLUSH FIT – Attaches directly to ratchet vide the assur- or torque wrench ance that RATCHETS • Specify 6 or 12 point sockets design and • Metric Sets • Custom Sets manufactur- Available in deep drive and • 3/4” & 1” SD available as special order er torque 1/4” 3/8” & 1/2” drive require- ments will be main- tained.

HEX BIT SOCKETS 3/8” drive from 1/4” to 7/16 and 1/2” drive EXTENSION BARS from 5/16” to Standard End & Flared End 1/2” 3/8” drive in 6 & 12” lengths 1/2” drive in 5 & 10” lengths FIBERGLASS EXTENSION BARS Custom made extension bars with a fiberglass shaft, completely removes end to end continuity. Fully insu- lated to provide bump protection for the metal end TORQUE SCREWDRIVER fittings. The units have been torque tested to 80 ft. Range: 2-36 in. lbs. lbs. and are rated for a maximum safe use of 60 ft. lbs.

OSHA 1926.416.29 CFR Ch. XVII (7-1-94 Edition): (g) Use of equipment. (1) Work on energized equipment. Only qualified persons . . . familiar with the proper use of special precautionary techniques, personal protective equipment, insulating and shielding materials, and insulated tools. • SEE OUR ILLUSTRATED PRICE LIST FOR COMPLETE DETAILS. www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442 • 15

INSULATING GLOVES JOB SAFETY FITS LIKE A GLOVE.

Insulating rubber gloves are the first line of protection against electrical shock. CLASS 00 Class 00, 0, 1 and 2 gloves are available in a full range of sixes to comfortably fit most employees. In accordance with OSHA Standard 1910.137(b)(2)(xii) Cementex Certifies Low Voltage that all gloves are dielectrically tested at time of sale. OSHA also requires gloves be 500V Max dielectrically tested every 6 months.

GLOVE KITS CONSIST OF PROTECTORS, GLOVES AND CARRY BAG.

CLASS 0 Low Voltage 1000V Max

Also, available are Glove Inflators, Cotton Liners, Talc and Dielectric Testing and Retesting Service.

CLASS 1 Daily use of a Cementex Glove Inflator will keep you High Voltage incompliance with OSHA 1910.137 which states, in part, . . . 7500V Max “Insulating equipment shall be inspected before each day’s use and immediately following an incident that can reasonably be suspected of having caused damage. Insulating gloves shall be given an air test, along with the inspection.”

CLASS 2 High Voltage 17500V Max

• CHECK OUR ILLUSTRATED PRICE LIST FOR DETAILS

16 • www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442 P.P.E. PROTECTING YOUR MOST IMPORTANT ASSETS – PERSONNEL.

Available from stock . . . a full line of insulating rubber sleeves and kits in Class 0, 1 and 2 as well as sleeve acces- sories including storage bags.

Also, available are insulating rubber blankets and kits in Class 0, 2 and 4 along with accessories. This includes ARC SLEEVES Suppression Blankets, Shielding Material Kits and Switch Board Matting in dimensional sizes or rolls up to 36 inches by 150 foot in length.

Blankets and sleeves are all dielectrically tested at the time of sale and in accordance with OSHA Standards must be retested every 12 months. This service is available from Cementex.

• SEE OUR ILLUSTRATED PRICE LIST FOR FULL DETAILS.

HOT STICKS Telescoping Hotsticks, Clampsticks, ADA “Shotgun Stick”, Universal Hot Sticks, Rescue Hooks and Switching Sticks are also available.

ARC SUPPRESSION BLANKETS

VOLTAGE DETECTORS Voltage Detectors (240V to 230kV or 500kV) with case and shotgun adapter are in stock. Has multiple switch selection voltage ranges with audible and visual indication of live voltage. Includes 3 standard Alkaline C cell batteries. BLANKETS & ACCESSORIES

www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442 • 17 PROTECTIVE CLOTHING

ARC FLASH PROTECTION The industries most complete offering of superior quality safety “Task-Wear.” Kits include: waist length parka, bib overalls with easy emergency access, hood with replaceable face shield, gloves and storage bag. Specify glove size when ordering.

COOLING VEST For use with ARC flash suits.

12 cal/cm 2 ARC SHIELD

DUFFEL BAGS Standard or Deluxe for ARC Flash Kits, Storage Bags for Gloves, Sleeves & Hotsticks 40 cal/cm2 25 cal/cm2 15 cal/cm 2 Parka & Bib Overalls

ALL “TASK-WEAR” IS AVAILABLE IN KITS (WITH OR WITHOUT GLOVES) AND INDIVIDUAL COMPONENTS.

18 • www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442 FLAME & FLASH RESISTANT WORK CLOTHES. YOUR DRESS CODE FOR SAFETY.

FLAME RESISTANT CLOTHING In 6 Cal Nomex IIIA by DuPont or 11 Cal Indura Ultra Soft by Westex

100 cal/cm2 2 100 cal/cm Ballistic 65 cal/cm2 50 cal/cm2 DIELECTRIC FOOT WEAR Overshoes, Boots and Ankle High, Deep Heel Overshoes

OSHA 1910.355 2-1,3,3,3 Protective Clothing and PPE for Application with a Flash Hazard Analysis etc. states that a flash hazard analysis shall determine, and the employer shall document, the incident energy exposure of the worker (in calories per square centimeter). This incident energy exposure level shall be based on the working distance of the employee’s face and chest areas form a prospective arc source for the specific task to be performed. www.newmantools.com tel 1-800-465-1384 fax 1-800-605-2442 • 19

OUROUR 33 DECADESDECADES OFOF INNOVATIONSINNOVATIONS ININ TOOLTOOL SAFETYSAFETY AREARE NONO ACCIDENT.ACCIDENT.

For almost 50 years Cementex has taken great pride in supplying the indus- try with the highest quality double-insulated 1000V safe- ty hand tools and personnel protective equipment. Our full line of products are specially designed, engi- neered and tested to keep your greatest assets, people and property, safe. Make Cementex your tools of choice, with the highest standard of safety inin youryour hands.hands.

PRODUCTS INC.

SINCE 1956

Newman Tools Inc. 185 Iber Rd. Ottawa, Ontario, Canada K2S 1E7 tel 1-800-465-1384, fax 1-800-605-2442