DOCSLIB.ORG

Milwaukee Rotary Hammer M18CH0

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Milwaukee Rotary Hammer M18CH0 OPERATOR’S MANUAL Cat. no. M18 CH M18 CHX M18™ FUEL™ 26 MM (1”) SDS PLUS ROTARY HAMMERS TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR’S MANUAL. GENERAL POWER TOOL SAFETY WARNINGS WARNING READ ALL SAFETY WARNINGS AND ALL INSTRUCTIONS. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. tool for your application. The correct power tool will WORK AREA SAFETY do the job better and safer at the rate for which it was • Keep work area clean and well lit. Cluttered or dark areas invite designed. accidents. • Do not use the power tool if the switch does not • Do not operate power tools in explosive atmospheres, such turn it on and off. Any power tool that cannot be as in the presence of flammable liquids, gases or dust. controlled with the switch is dangerous and must be Power tools create sparks which may ignite the dust or fumes. repaired. • Keep children and bystanders away while operating a • Disconnect the plug from the power source and/or power tool. Distractions can cause you to lose control. the battery pack from the power tool before making any adjustments, changing accessories, or storing ELECTRICAL SAFETY power tools. Such preventive safety measures reduce • Power tool plugs must match the outlet. Never modify the the risk of starting the power tool accidentally. plug in any way. Do not use any adapter plugs with earthed • Store idle power tools out of the reach of children (grounded) power tools. Unmodified plugs and matching and do not allow persons unfamiliar with the power outlets will reduce risk of electric shock. tool or these instructions to operate the power tool. • Avoid body contact with earthed or grounded surfaces Power tools are dangerous in the hands of untrained such as pipes, radiators, ranges and refrigerators. There users. is an increased risk of electric shock if your body is earthed or • Maintain power tools. Check for misalignment or grounded. binding of moving parts, breakage of parts and • Do not expose power tools to rain or wet conditions. Water any other condition that may affect the power entering a power tool will increase the risk of electric shock. tool’s operation. If damaged, have the power tool • Do not abuse the cord. Never use the cord for carrying, repaired before use. Many accidents are caused by pulling or unplugging the power tool. Keep cord away poorly maintained power tools. from heat, oil, sharp edges or moving parts. Damaged or • Keep cutting tools sharp and clean. Properly entangled cords increase the risk of electric shock. maintained cutting tools with sharp cutting edges are • When operating a power tool outdoors, use an extension less likely to bind and are easier to control. cord suitable for outdoor use. Use of a cord suitable for • Use the power tool, accessories and tool bits etc. outdoor use reduces the risk of electric shock. in accordance with these instructions, taking into • If operating a power tool in a damp location is unavoidable, account the working conditions and the work to use a ground fault circuit interrupter (GFCI) protected be performed. Use of the power tool for operations supply. Use of an GFCI reduces the risk of electric shock. different from those intended could result in a hazardous situation. PERSONAL SAFETY • Stay alert, watch what you are doing and use common BATTERY TOOL USE AND CARE sense when operating a power tool. Do not use a power tool • Recharge only with the charger specified by the while you are tired or under the influence of drugs, alcohol manufacturer. A charger that is suitable for one type or medication. A moment of inattention while operating power of battery pack may create a risk of fire when used with tools may result in serious personal injury. another battery pack. • Use personal protective equipment. Always wear eye • Use power tools only with specifically designated protection. Protective equipment such as dust mask, non-skid battery packs. Use of any other battery packs may safety shoes, hard hat, or hearing protection used for appropriate create a risk of injury and fire. conditions will reduce personal injuries. • When battery pack is not in use, keep it away from • Prevent unintentional starting. Ensure the switch is in the other metal objects like paper clips, coins, keys, off-position before connecting to power source and/or nails, screws, or other small metal objects that can battery pack, picking up or carrying the tool. Carrying power make a connection from one terminal to another. tools with your finger on the switch or energising power tools that Shorting the battery terminals together may cause have the switch on invites accidents. burns or a fire. • Remove any adjusting key or wrench before turning the • Under abusive conditions, liquid may be ejected power tool on. A wrench or a key left attached to a rotating part from the battery; avoid contact. If contact of the power tool may result in personal injury. accidentally occurs, flush with water. If liquid • Do not overreach. Keep proper footing and balance contacts eyes, additionally seek medical help. at all times. This enables better control of the power Liquid ejected from the battery may cause irritation or tool in unexpected situations. burns. • Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away SERVICE from moving parts. Loose clothes, jewellery or long • Have your power tool serviced by a qualified hair can be caught in moving parts. repair person using only original manufacturer’s • If devices are provided for the connection of dust replacement parts. This will ensure that the safety of extraction and collection facilities, ensure these the power tool is maintained. are connected and properly used. Use of dust collection can reduce dust-related hazards. SPECIFIC SAFETY RULES • Wear ear protectors. Exposure to noise can cause POWER TOOL USE AND CARE hearing loss. • Do not force the power tool. Use the correct power • Use auxiliary handle(s), if supplied with the tool. 2 Loss of control can cause personal injury. FUNCTIONAL DESCRIPTION • Hold power tools by insulated gripping surfaces, when performing an operation where the cutting tool may contact hidden wiring. Cutting accessory 7 contacting a “live” wire may make exposed metal parts 5 8 of the power tool “live” and could give the operator an 4 electric shock. • Maintain labels and nameplates. These carry important information. If unreadable or missing, please contact the store where the product was originally purchased or one of our authorised MILWAUKEE® service centres. • WARNING Some dust created by power sanding, 3 sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, 2 birth defects or other reproductive harm. Some 6 examples of these chemicals are: - lead from lead-based paint 1 - crystalline silica from bricks and cement and other masonry products, and - arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on 9 how often you do this type of work. To reduce your 1. Side handle exposure to these chemicals: work in a well ventilated 2. Clamping lever 6. Mode selector area, and work with approved safety equipment, such as 3. Depth gauge rod 7. Trigger those dust masks that are specially designed to filter out microscopic particles. 4. SDS Plus bit holder 8. Control switch 5. Release collar 9. Dust Extractor SPECIFICATIONS connection Cat. No. M18 CH / M18 CHX Volts DC 18 ASSEMBLY No load RPM 0 - 1400 No load BPM 0 - 4900 WARNING Recharge only with the charger Capacities specified for the battery. For specific charging instructions, read the operator’s manual supplied Drill only with your charger and battery. Steel - mm 13 Wood WARNING Always remove battery pack - mm 29 before changing or removing accessories. Only Rotary hammer (concrete) use accessories specifically recommended for this tool. Others may be hazardous. Carbide tipped percussion bit - mm 26 Removing battery pack from tool Push in the release buttons and pull the battery pack Core bit away from the tool. - mm 64 Inserting battery pack into tool To insert the battery pack onto the tool, slide the pack SYMBOLOGY onto the body of the tool. Make sure it latches securely into place. Volts Adjusting the side handle position 1. Loosen the side handle by unscrewing the side Direct Current handle grip until the side handle rotates freely. Blows per minute (BPM) 2. Rotate the side handle to the desired position. 3. Tighten the side handle grip securely. -1 No load revolutions per minute n 0xxxxmin. (RPM) Setting the depth gauge 1. Press in the clamping lever. Anti-vibration system 2. Slide the depth gauge rod backward or forward until it is set for the desired depth. NOTE: The drilling depth is the distance between the tip of the bit and the tip of the depth gauge rod. 3. Release the clamping lever. 3 Fig. 1 Drilling Depth Installing drill bits and chisels (M18 CHX) NOTE: Only use accessories with SDS or SDS Plus shanks. 1. For rotation only, rotate the mode selector so the Be sure that the shank of the bit is clean. Dirt particles arrow on the lever points to . may cause the bit to line up improperly. Do not use 2. For rotary hammering, rotate the mode selector so bits larger than the maximum recommended capacity the arrow points to . of the drill because gear damage or motor overloading may result.
Load more

Recommended publications
  • Rotary Hammer Drills ATEX
    Rotary Hammer Drills ATEX Pneumatic and hydraulic: powerful percussion drilling for concrete and masonry • SDS chuck • Safety clutch protects against overloading and jamming Air Model 2 2404 0010 • Hammer drill holes in concrete, brick and masonry SDS Plus up to 1" dia. • Rotary drilling mode for straight drilling of steel and wood • Open center hydraulic standard, closed center optional SDS Max – Modes of Operation 2" bit capacity for drilling concrete and masonry SDS Plus – Hammer and Drill 1" bit capacity for drilling concrete and masonry Drill concrete anchor holes, thru holes, Hammer with Rotation piping and mechanical openings for Ideal for concrete drilling construction and repair work. Switches to Rotation Only rotary drilling mode for steel and wood. For drilling steel and wood (not reversible) Air Model 2 2417 0010 SDS Max Second handle Hydraulic Model position 2 2406 0010 Hydraulic SDS Plus SAE #8 Model SAE #8 port for oil port 2 2418 0010 hydraulic hose connection SDS Max SDS Drill Bits Closed-Center Flow Control Valve Small Masonry Bits SDS Plus up to 1" dia. Optional accessory for use with closed-center Large Masonry Bits hydraulic power systems - adapts open-center tools SDS Max up to 2" dia. to closed-center. [Part No. 38632] Pneumatic Blows/ Drill Solid Bit Core Bit Twist Motor Hammer Drill Minute Speed Capacity Capacity Drill Power CFM @ Tool Dimensions Model No. (BPM) (RPM) (Concrete) (Concrete) (Wood) (HP) 90 PSI System (inches) Weight 2 1266 0010* 0-2000 0-950 1/2" dia. 1" dia. 3/8" dia. 0.75 21 1/2" Chuck 12x81/2 x4 7 2 2404 0010 0-3000 0-625 1" dia.
    [Show full text]
  • 1. Hand Tools 3. Related Tools 4. Chisels 5. Hammer 6. Saw Terminology 7. Pliers Introduction
    1 1. Hand Tools 2. Types 2.1 Hand tools 2.2 Hammer Drill 2.3 Rotary hammer drill 2.4 Cordless drills 2.5 Drill press 2.6 Geared head drill 2.7 Radial arm drill 2.8 Mill drill 3. Related tools 4. Chisels 4.1. Types 4.1.1 Woodworking chisels 4.1.1.1 Lathe tools 4.2 Metalworking chisels 4.2.1 Cold chisel 4.2.2 Hardy chisel 4.3 Stone chisels 4.4 Masonry chisels 4.4.1 Joint chisel 5. Hammer 5.1 Basic design and variations 5.2 The physics of hammering 5.2.1 Hammer as a force amplifier 5.2.2 Effect of the head's mass 5.2.3 Effect of the handle 5.3 War hammers 5.4 Symbolic hammers 6. Saw terminology 6.1 Types of saws 6.1.1 Hand saws 6.1.2. Back saws 6.1.3 Mechanically powered saws 6.1.4. Circular blade saws 6.1.5. Reciprocating blade saws 6.1.6..Continuous band 6.2. Types of saw blades and the cuts they make 6.3. Materials used for saws 7. Pliers Introduction 7.1. Design 7.2.Common types 7.2.1 Gripping pliers (used to improve grip) 7.2 2.Cutting pliers (used to sever or pinch off) 2 7.2.3 Crimping pliers 7.2.4 Rotational pliers 8. Common wrenches / spanners 8.1 Other general wrenches / spanners 8.2. Spe cialized wrenches / spanners 8.3. Spanners in popular culture 9. Hacksaw, surface plate, surface gauge, , vee-block, files 10.
    [Show full text]
  • Repair Prices
    REPAIR PRICES MODEL RETAIL MVP DESCRIPTION NUMBER PRICE REPAIR PRICE BENCHTOP – MITER-TABLE SAWS CUT-OFF-TILE SAWS 3814 $199.00 $125.37 14" Benchtop Abrasive Cutoff Machine 3912 $201.96 12" Compound Miter Saw 4100 $333.54 10" Worksite Table Saw 4310 $354.96 10" Dual-Bevel Slide Miter Saw with Upfront Controls 4405 $295.80 10" Single-Bevel Slide Miter Saw with Upfront Controls 4412 $398.82 12" Dual-Bevel Slide Miter Saw with Upfront Controls 5312 $408.00 12" Dual-Bevel Slide Miter Saw with Upfront Controls 4100-09 $599.00 $377.37 10 In. Worksite Table Saw with Gravity-Rise™ Wheeled Stand 4212L $287.64 12" Dual-Bevel Compound Miter Saw with Upfront Controls & Laser Tracking 4410L $402.90 10" Dual-Bevel Slide Miter Saw with Upfront Controls & Laser Tracking 5412 $463.08 12" Dual-Bevel Slide Miter Saw with Upfront Controls CM10GD $599.00 $377.37 10 In. Dual-Bevel Glide Miter Saw CM12 $208.08 12" Single-Bevel Compound Miter Saw CM12SD $345.87 12" Dual-Bevel Slide Miter Saw CM8S $449.00 $282.87 8-1/2 In. Single-Bevel Slide Miter Saw GCM12SD $649.00 $408.87 12" Dual-Bevel Glide Miter Saw GTS1031 $379.00 $238.77 10 In. Portable Jobsite Table Saw TC10 $581.40 10" Wet Tile and Stone Saw CONCRETE – DEMOLITION-ROTARY HAMMERS • HAMMER DRILLS 11240 $256.02 1-9/16" SDS-max® Combination Hammer 11247 $245.82 1-9/16" Spline Combination Hammer 11248 $312.12 1-9/16" Spline Combination Hammer 11304 $887.00 Brute™ Breaker Hammer 11387 $314.16 Round Hex Demolition Hammer 11388 $314.16 SDS-max® Demolition Hammer 1194AVSR $75.11 1/2" Dual Torque Hammer Drill
    [Show full text]
  • HAMMERS DEMOLITION HAMMER BITS CHART 1-1/8” Hex Shank Makita Large Shank Makita Small Shank D15 D14 D13 D12 D9 D7 D5 D4 D3 D2 D1 D7 D5 D4 D3 D2 D1 D10 D8 D3 D1
    HAMMERS DEMOLITION HAMMER BITS CHART 1-1/8” Hex Shank Makita Large Shank Makita Small Shank D15 D14 D13 D12 D9 D7 D5 D4 D3 D2 D1 D7 D5 D4 D3 D2 D1 D10 D8 D3 D1 Makita HM1304B HM1810 Large Makita 1-1/8” Small Hex HM1500 HK1810 SDS Plus Shank SDS Max Shank 3/4” Hex Shank D10 D8 D3 D2 D1 HK1820 D9 D7 D6 D5 D4 D3 D2 D1 D16 D11 D9 D7 D6 D5 D4 D3 D2 D1 SDS max HK1820L 3/4” Hex 21/32” SDS Round Shank Plus HM0860C HM1100C HM1202C HK0500 HM1211B ROTARY HAMMER BITS CHART SDS PLUS SHANK HR3210C R1 HR3210FCT R8 IS ADAPTER WHICH ALLOWS OLDER TOOLS TO USE DEMOLITION BITS R6 HR2811F Metal R3 R2 HR3000C Wood R4 SDS Plus HR2432 D1 R23c R23b R23 R23a HR2455 R9 R8 R10 HR2470F / FT HR160DWA & HR2400 only SDS MAX SHANK D4 R1a HR5210C D5 HR5211C D1 D11 D6 HR4010C SDS HR4011C D2 HR4510C D16 D15 max HR4511C SDS Max D18 D9 D3 HR4002 R24c R24b R24 R24a HR4500C SPLINE SHANK & 3/4” HEX SHANK 21/32” Round Shank D4 D2 3/4” HEX Shank 21/32” Round Shank D5 D3 HR3851 D8 D6 R6 D7 HR4040C R1b D1 D18 D17 R24a R24c R24b R24 D16 HR5000 Taper Shank R5 Spline Shank 67 HAMMERS DEMOLITION HAMMER BITS CHART Demolition Hammer Bits Chart HM1202C, HM1100C, HR3210C/FCT, HM0860C, HR5210C, HR3000C, HR2811F, HR5211C, HR4510C, HM1810C, HM1304B HM1500 HK1810 HR2455, HR2432, Model HR4511C, HR4500C, HR2470F/FT, HK1820, HR4010C, HR4011C, HK0500 HR4002 Ref. No. Description 1-1/8" Hex 3/4" Hex Makita Large Makita Small SDS Plus 3/4" Hex, 21/32" Round SDS Max Hex Shank Size Part No.
    [Show full text]
  • 249 $249 $249 Build Your Own Kit!
    2018 VALID MAY 1 - JULY 31 SAVE BIG! OR WHILE SUPPLIES LAST WHILE SUPPLIES LAST NEW DRAIN CLEANING SOLUTIONS PURCHASE A QUALIFYING PURCHASE A QUALIFYING PURCHASE A QUALIFYING DRAINSNAKE™ DRAIN CLEANING MACHINE DRAIN CLEANING MACHINE M18 FUEL™ Drain Snake M12™ TRAPSNAKETM w/ CABLE DRIVE™ Kit 4" Urinal Auger Kit 2772A-21 2574-21 6" Toilet Auger Kit M12™ AIRSNAKE™ Drain M18 FUEL™ Drain Snake 2576-21 Cleaning Air Gun Kit w/ CABLE DRIVE™ Kit 2572A-21 2772B-21XC 2-Tool Combo Kit M12™ Drain Snake Kit 2577-21 Cleaning Air Gun Kit 2571-20/21 2572B-21 GET A FREE 48-11-1850 GET A FREE GET A FREE XC5.0 BATTERY 2.0 BATTERY 48-11-2420 6.0 BATTERY 48-11-2460 Please redeem free goods via www.milwaukeetool.com or contact your Salisbury or Milwaukee sales representative for assistance. PURCHASE SELECT M18 FUELTM KIT AND GET $50 OFF ITEM # DESCRIPTION eligible tools ITEM # DESCRIPTION eligible tools 2704-22 M18 FUEL™ 1/2” Hammer Drill/Driver Kit 2755B-22 M18 FUEL™ 1/2'' Impact Wrench w/ Friction Ring Kit 2753-22 M18 FUEL™ 1/4'' HEX Impact Kit 2860-22 M18 FUEL™ 1/2” Mid-Torque Impact Wrench w/ Pin Detent Kit 2754-22 M18 FUEL™ 3/8'' Impact Wrench Kit 2861-22 M18 FUEL™ 1/2” Mid-Torque Impact Wrench w/ Friction Ring Kit 2755-22 M18 FUEL™ 1/2'' Impact Wrench w/ Pin Detent Kit BUILD YOUR OWN KIT! PURCHASE ANY (2) SELECT M18 FUELTM BARE TOOLS AND RECEIVE FREE M18 FUEL™ Metal (2) XC5.0 BATTERIES AND M18 FUEL™ 1-9/16” Cutting Circular Saw SDS Max Hammer Drill 2782-20 CONTRACTOR BAG 2717-20 M18 FUEL™ HT 1/2” Impact Wrench 2766/67-20 M18 FUEL™ SAWZALL® Reciprocating
    [Show full text]
  • Milwaukee Tools
    Updated: May 2010 Pricing Effective: May 2010 MILWAUKEE TOOLS www.milwaukeetool.com INDEX ACCESSORIES COMBINATION KITS.......................................................................... 14-3 BaND SaW BLaDes.................................................................... 14-7 COPPER TUBING CUTTER............................................................... 14-5 BaTTerY PacKs/CHarGer..................................................... 14-7 CUT-OFF MACHINES........................................................................ 14-3 BiT EXTeNsioN............................................................................. 14-9 CircULar SaW BLaDes........................................................ 14-10 DRILLS.................................................................................................... 14-3 HoLe SaWs HAMMER AND HAMMER DRILLS................................................ 14-3 4/6 Bi-MeTaL ........................................................................... 14-8 HEAVY DUTY ACCESSORIES....................................................... 14-11 Arbors...................................................................................... 14-9 INTroDUcTioN................................................................................. 14-2 ice HarDeNeD bi-meTaL .................................................. 14-9 PiLoT DriLLs............................................................................ 14-9 MisceLLaNeoUs...........................................................................
    [Show full text]
  • Rotary Hammer Owner's Manual
    ROTARY HAMMER OWNER'S MANUAL ! WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item # 1433840 0710 For technical questions and replacement parts, please call 1-800-222-5381. Thank you very much for choosing a Klutch TM product. For future reference, please complete the owner's record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This machine is designed for certain applications only. The distributor strongly recommends this machine is not modified and/or used for any application other than that for which it was designed. If you have any questions relative to a par- ticular application, DO NOT use the machine until you have first contacted the distributor to determine if it can or should be performed on the product. For technical questions please call 1-800-222-5381. INTENDED USE The Rotary Hammer Drill is specifically designed for fast impact drilling of anchor holes and through holes for concrete and masonry. TECHNICAL SPECIFICATIONS Description Specifications Motor: 120V, 60Hz, 7.6 Amps No load speedd: 800 RPM Impacts: 3100 BPM GENERAL SAFETY RULES WARNING! Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. WARNING! The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions or situations that could occur.
    [Show full text]
  • Tool Lending Library – Available Tools
    Tool Lending Library – Available Tools Lending period is seven (7) days. NO RENEWALS Late Fees: $1.00 - $5.00 for each day a tool is late (CASH ONLY). Fees listed below . Tools must be returned to the Tool Lending Library during open hours. Members are limited to check out one power tool and four hand tools at one time. * * PLEASE CLEAN TOOLS BEFORE RETURNING THEM! * * * OPEN – MONDAY thru SATURDAY - 9:00 a.m. – 5:00 p.m. 2414 Cerrillos Road – 505-473-1114 CARPENTRY & Late Fees FLOOR & WALL Late Fees WOODWORKING Per Day Per Day PLUMBING Late Fees Cutter Wet Tile (power tools) Per Day Awl, (Gimlet, Scratch) $1.00 Cutter Tile 4" x 6" $1.00 Bar (Wonder, Wrecking) $1.00 Gun Caulking $1.00 Cutter for Copper Pipe $1.00 Brace and Bit $1.00 Gun Heat $1.00 Pipe threader $1.00 Caliper (4", 6” outside) $1.00 Knife Linoleum $1.00 Wrench Adjustable 6” – 12” $1.00 Chalk Line $1.00 Paint Mixer $1.00 Wrench Slip Lock-Nut $1.00 Crow Bar 24" $1.00 Roller Paint w/Ext. Pole $1.00 Files $1.00 Sanding Tool Drywall $1.00 POWER TOOLS Drills &Bits Hammer (Ball Peen, Claw, Drywall, Telescope Roller Handle $1.00 Drill Bit Set Masonry Carbide $1.00 Sedge, Tack) $1.00 Drill Bit Set Wood / Metal $1.00 Hatchet $1.00 GARDENING Drill Bit Set (Complete) $1.00 Levels (torpedo, 2’ 3’ 4’) $1.00 Claw $1.00 Drills (Hammer, Rotary) $5.00 Mallet (Rubber, Sculptor’s, hand) $1.00 Edger $1.00 Drill Press Portable Power $5.00 Measuring tape (various sizes) $1.00 Hedge Trimmer Electric $3.00 Impact wrench $5.00 Nail puller $1.00 Leaf Blower $5.00 Planes (Hand, molding, wood block)
    [Show full text]
  • Concrete and Masonry
    RSEV 19-125 RT RFEV 19-125 RT r 5” VS face P ep Surface ur Prep Kit S e PE 15-30 M n a T 13-125 to PE 15-20 RT s CED Set S o / n r RSEV 17-125 PWE 11-100 y Set e AS 18 PC HEPA t C e T 13-125 r TuckPoint Set u ASR 35 ACP HEPA c t t n WEV 15-150 HT i n o 7" Surface g T 24-230 MVT C Prep Kit CED WEV 15-125 HT MFE 40 KHE D-26 MHEV 11 BL WEV 11-125 SBEV 1000-2 MHEV 5 BL KHE 3250 C SB 18 LTX BL I o n SBE 850-2 c g r in KHEV 11-52 e SB 18 LTX-3 BLQ I k BL te SBE 650 a e / r KHA 18 LTX BL 24 M B + ISA 18 LTX as & KHEV 8-45 BL onry Drilling KHA 36-18 LTX 32 (2x18V) KHEV 5-40 BL KH 5-40 OSHA COMPLIANT See page 122-123 for vacuum and accessories 112 05 Concrete & Masonry Solutions Full range of OSHA Compliant* dustless solutions (tools, vacuum and shrouds) Specially designed systems to outperform the applications Powerful, light weight tools High torque for demanding applications Wide ranges of available accessories Ergonomically designed *CFR 1926.1153 for respirable crystalline silica 113 1-1/2” x 13’ Anti-static Suction Hose 631370000 METABO COMPLIANT SYSTEMS FLEXIBILITY FOR MEETING OSHA CFR 1926.1153 THE HEART OF MADE IN GERMANY THE DUSTLESS SYSTEM 157 CFM, NO SUCTION LOSS Mode selection dial WHEN IN SELF CLEANING MODE Tool outlet: The vacuum starts and stops Power dial: Adjust to provide automatically when the tool with proper power/amp tool is turned on/off supply Flip door release Durable wheels: Large rear WET / DRY Capable wheels.
    [Show full text]
  • Drills & Rotary Hammers
    DRILLS & ROTARY HAMMERS SDS Plus 3 Mode Hammer Rated input 800 w KHE 3251 st / wd / conc. Drill ø • 3 x mode - Rotary hammer, drilling, chiselling 13 / 35 / 32 mm • Marathon motor: More torque, More power output, Speed 0-1,150 rpm Higher overload capacity, Maximum durability • Metabo S-automatic safety clutch Impact rate 4,470 bpm • Metabo Quick: quick change between SDS Plus hammer chuck and keyless chuck for drilling in wood and metal Impact energy 3.1 j • Metabo VibraTech (MVT): integrated damping system Weight 3.6 kg and side handle • High performance hammer action • Ergonomic housing shape for chiselling tasks without side handle • Vario (V)-Electronics for working at customised speeds to suit various application materials • High performance hammer action • Cable-protecting ball joint for optimal freedom of motion BONUS when working Includes: Chuck 31968 The Metabo 3-year warranty We give you an extra long 3 year warranty on all our products. Simply register up to 4 weeks after your purchase on the Internet and your regular guarantee is extended to three years. Register at www.metabo.com/xxl www.metabo.com.au 1800 metabo 3 Mode SDS Plus High Torque Drills KHE 2644 Rated input 800 w • 3 x mode - Rotary hammer, drilling, chiselling St / wd / conc. Drill ø • Metabo S-automatic safety clutch 13 / 30 / 26 mm • High performance hammer action Speed 0-1,150 rpm • Hammer stop for drilling in rotary only mode BE 75-16 • Rotation stop for chiselling Impact rate 5,400 bpm • Robust die cast aluminium gear housing • Clockwise and anti-clockwise rotation BDE 1100 • Electronic soft start Impact energy 2.3 j • Rotating carbon brush bridge • Metabo S-automatic safety clutch • Vario (V)-electronics-variable speed e.g.
    [Show full text]
  • Handheld and Stand-Mounted Drills Fact Sheet
    FactSheet CONTROL OF SILICA DUST IN CONSTRUCTION Handheld and Stand-Mounted Drills The use of handheld and stand-mounted drills, impact and rotary hammer drills, and similar tools used to drill holes in concrete, masonry, or other silica- containing materials can generate respirable crystalline silica dust. When inhaled over time, the small particles of silica can irreversibly damage the lungs. This fact sheet describes dust controls that can be used to minimize the amount of airborne dust when using handheld and stand-mounted drills as listed in Table 1 of the Respirable Crystalline Silica Standard for Construction, 29 CFR 1926.1153. Engineering Control Method: Vacuum Dust Collection System Vacuum Dust Collection System (VDCS) • Keep the vacuum hose clear and free of When using handheld or stand mounted drills to debris, kinks and tight bends. drill into concrete or other materials that contain • Activate any non-automatic filter-cleaning crystalline silica, reduce exposure to silica dust mechanism as needed to reduce dust buildup by enclosing the drill in a commercially available on the filter. shroud or cowling with a vacuum attached to • Change vacuum-collection bags as needed. capture the silica dust as it is generated around • Set a schedule for filter cleaning and the drill bit. maintenance. • Avoid exposure to dust when changing vacuum A VDCS is commercially available in a variety bags and cleaning or replacing air filters. of designs that include a dust collection device (shroud or cowling), vacuum, hose, filter, and When necessary to clean the dust and debris filter-cleaning mechanism. These systems are from the drilled holes, a HEPA-filtered vacuum typically available integrated into the tools or as system must be used to capture the dust.
    [Show full text]
  • CASS-Tools-Library.Pdf
    CASS Tools Library Carpentry and Woodworking • Awl • Bars (cat's paw, crowbar, pry bar, ripping chisel, tack puller) • Butt marker (3 1/2" & 4") • Cabinet scraper • Chalk line • Chisels, gouges & parting tools • Dado set • Door installation kit • Doweling jig • Drills • Gutter cleaner • Hammers (brick, drywall, ballpeen, dead-blow, framing, mallets, shingle hatchet, sledge, curved claw, tack) • Hinge Template • Levels (torpedo, 2', 3', 4', 6', laser) • Marking gauge • Measuring wheel • Nail puller, nail set • Planes (block, bench, spokeshave, rabbet) • Roofing spades (shingle remover) • Rasps (surform tool) • Saws (back, compass, coping, crosscut, hacksaw, jab, keyhole, miter [with box], rod, shortcut) • Screwdrivers (off-set, Phillips, Robertson, slotted, Torx, Yankee) • Screw extractor & drill bit set • Squares (combination, rafter, carpenter's, Tri-square, Universal square) • Stapler, tack hammer • Stud finders (stud sensor) • Tape measure • Water level Clamps • 2-Way Edging Clamp • Assembly Square • Angle clamp • Bar clamp 1 • C-clamp • Cabinet clamp • Edge clamp • Hand screw clamp • Quick grip clamp/spreader • Sliding arm clamp • Spring clamp • Steel pipe clamps • Vise grips Concrete and Masonry • Brick hammer, joiner, trowel • Bull float, magnesium • Cement finishing tools (edger, float, groover, hawk, joiner, trowels, tuck pointer) • Cold chisels • Concrete Cutting Saw* • Dust pump (blower for cement dust) • Fresno trowel (with handles) • Leaf blower* • Mason's layout tools (line winder, stretchers, blocks) • Mixing paddle • Mortar
    [Show full text]