DOCSLIB.ORG

Ensinger Plastic Catalog

Total Page：16

File Type：pdf, Size：1020Kb

Download full-text PDF Read full-text
Ensinger Plastic Catalog Extruded Rod Availability ឣ Normally Stocked Approximate Weight Diameter in Inches - Standard Length 10 Feet MATERIAL 3/16 1/4 5/16 3/8 7/16 1/2 9/16 5/8 3/4 7/8 111-1/8 1-1/4 1-3/8 1-1/2 1-5/8 1-3/4 -7/8 DELRIN® Natural, Black .017 .030 .047 .068 .093 .121 .154 .189 .273 .371 .485 .614 .758 .917 1.09 1.28 1.49 1.71 570 .019 .033 .052 .075 .102 .133 .168 .207 .299 .407 .531 .672 .830 1.00 1.20 1.40 1.63 1.87 AF Blend .018 .033 .051 .074 .100 .131 .166 .205 .295 .401 .524 .664 .819 .991 1.18 1.38 1.61 1.84 TECAFORM™ Natural, Black .017 .030 .047 .068 .093 .121 .154 .189 .273 .371 .485 .614 .758 .917 1.09 1.28 1.49 1.71 SD .016 .022 .045 .064 .087 .114 .144 .178 .257 .349 .456 .577 .713 .862 1.03 1.20 1.40 1.60 HPV 13 .018 .033 .051 .074 .100 .131 .166 .205 .295 .401 .524 .664 .819 .991 1.18 1.38 1.61 1.84 TECAMID™ Natural, Black .014 .024 .038 .055 .074 .097 .127 .152 .218 .297 .388 .491 .607 .734 .873 1.02 1.19 1.36 MDS .014 .024 .038 .055 .074 .097 .127 .152 .218 .297 .388 .491 .607 .734 .873 1.02 1.19 1.36 Natural GF 30 .016 .029 .045 .065 .088 .115 .145 .179 .259 .352 .460 .582 .718 .869 1.03 1.21 1.41 1.62 TECANAT™ Natural, Black .014 .026 .040 .057 .078 .102 .129 .160 .230 .313 .409 .517 .638 .772 .919 1.08 1.25 1.44 Natural GF 20 .016 .029 .045 .064 .087 .114 .144 .178 .257 .349 .456 .577 .713 .863 1.03 1.20 1.40 1.60 TECADUR™ PET Natural .016 .029 .045 .066 .089 .117 .148 .182 .262 .357 .466 .590 .729 .882 1.05 1.23 1.43 1.64 TECAFLON™ PVDF Natural .021 .038 .060 .085 .116 .151 .192 .237 .341 .464 .606 .767 .947 1.15 1.36 1.60 1.86 2.13 TECARAN™ Natural, ABS Black .013 .023 .035 .051 .069 .090 .114 .141 .203 .276 .361 .457 .564 .682 .812 .953 1.11 1.27 Flame Retardant .015 .027 .041 .060 .081 .106 .134 .165 .238 .324 .423 .536 .662 .800 .953 1.12 1.30 1.49 ™ TECASON S Natural .015 .026 .041 .059 .081 .106 .134 .165 .238 .323 .422 .534 .660 .798 .950 1.11 1.29 1.48 TECATRON™ Natural .016 .029 .045 .065 .088 .115 .145 .179 .259 .352 .460 .582 .718 .869 1.03 1.21 1.41 1.62 Natural GF 20 .019 .035 .055 .079 .107 .140 .176 .217 .315 .428 .559 .707 .872 1.06 1.26 1.47 1.71 1.97 TECAPEEK™ Natural .016 .028 .043 .062 .085 .111 .140 .173 .249 .339 .443 .560 .692 .837 .996 1.17 1.36 1.56 Natural GF 30 .018 .032 .050 .072 .098 .128 .162 .200 .287 .391 .511 .646 .798 .966 1.15 1.35 1.56 1.80 Natural CF 30 .017 .031 .048 .069 .094 .123 .156 .192 .276 .376 .491 .621 .767 .929 1.11 1.30 1.50 1.73 ® ULTEM Natural .015 .021 .042 .061 .083 .108 .137 .169 .243 .331 .432 .547 .676 .817 .973 1.14 1.32 1.52 Natural GF 10 .016 .022 .045 .064 .087 .114 .144 .178 .257 .349 .456 .577 .713 .862 1.03 1.20 1.40 1.60 Natural GF 20 .017 .023 .047 .068 .093 .121 .153 .189 .272 .370 .483 .612 .756 .913 1.09 1.27 1.48 1.70 Natural GF 30 .018 .025 .050 .073 .099 .128 .163 .201 .289 .394 .514 .650 .804 .971 1.16 1.36 1.57 1.81 NORYL® Black EN 265 .013 .023 .035 .051 .069 .090 .114 .141 .203 .276 .361 .457 .564 .682 .812 .953 1.11 1.27 Natural GF 30 .017 .030 .045 .065 .089 .115 .146 .234 .260 .354 .463 .586 .724 .875 1.04 1.22 1.42 1.63 TECAFINE™ PP Natural .012 .019 .030 .043 .059 .076 .097 .119 .172 .234 .306 .388 .479 .579 .688 .808 .941 1.08 TECAFINE™ HDPE Natural .015 .020 .032 .046 .063 .081 .103 .126 .182 .248 .324 .411 .508 .614 .729 .856 .997 1.14 SINTIMID® Natural .016 .022 .045 .064 .087 .114 .144 .178 .257 .349 .456 .577 .713 .862 1.03 1.20 1.40 1.60 15% graph .017 .030 .047 .068 .093 .121 .154 .189 .273 .371 .485 .614 .758 .917 1.09 1.28 1.49 1.71 Ensinger-Hyde™ welcomes inquiries regarding Standard Length - 10 Feet. Other diameters and Diameter Tolerances engineering plastics other than those listed above. tolerances are available on a custom-order basis. 3/16” - 1” + 0.002” -0.000” 4 Extruded Rods (pounds per foot) Diameter in Inches - Standard Length 10 Feet 2 2-1/8 2-1/4 2-3/8 2-1/2 2-5/8 2-3/4 2-7/8 3 3-1/4 3-1/2 3-3/4 4 4-1/4 4-1/2 4-3/4 5 5-1/2 6 6-1/2 7 7-1/2 8 1.94 2.19 2.46 - 3.03 3.34 3.67 4.01 4.37 5.12 5.94 6.82 7.76 8.76 9.83 11.0 12.1 14.7 17.5 20.5 23.8 27.3 31.1 2.12 2.40 2.69 3.00 3.32 3.66 4.02 4.39 4.78 5.61 6.51 7.47 8.50 9.59 10.8 12.0 13.3 16.1 19.1 22.4 26.0 29.9 34.0 2.10 2.37 2.65 2.96 3.28 3.61 3.97 4.33 4.72 5.54 6.42 7.37 8.39 9.47 10.6 11.8 13.1 15.9 18.9 22.2 25.7 29.5 33.6 1.94 2.19 2.46 2.74 3.03 3.34 3.67 4.01 4.37 5.12 5.94 6.82 7.76 8.76 9.83 11.0 12.1 14.7 17.5 22.2 25.7 29.5 33.6 1.83 2.06 2.31 2.57 2.85 3.14 3.45 3.77 4.11 4.82 5.59 6.42 7.30 8.24 9.24 10.3 11.4 13.8 16.4 19.3 22.4 25.7 29.2 2.10 2.37 2.65 2.96 3.28 3.61 3.97 4.33 4.72 5.54 6.42 7.37 8.39 9.47 10.6 11.8 13.1 15.9 18.9 22.2 25.7 29.5 33.6 1.55 1.75 1.97 2.19 2.43 2.67 2.94 3.21 3.49 4.10 4.75 5.46 6.21 7.01 7.86 8.76 9.71 11.7 14.0 16.4 19.0 21.8 24.8 1.55 1.75 1.97 2.19 2.43 2.67 2.94 3.21 3.49 4.10 4.75 5.46 6.21 7.01 7.86 8.76 9.71 11.7 14.0 16.4 19.0 21.8 24.8 1.84 2.08 2.33 2.59 2.87 3.17 3.48 3.80 4.14 4.86 5.63 6.46 7.35 8.30 9.31 10.4 11.5 13.9 16.6 ---- 1.63 1.85 2.07 2.30 2.55 2.81 3.09 3.88 3.68 4.32 5.01 5.75 6.54 7.38 8.27 9.22 10.2 12.4 14.7 17.3 20.0 23.0 26.2 1.83 2.06 2.31 2.57 2.85 3.14 3.45 3.77 4.11 4.82 5.59 6.42 7.30 8.24 9.24 10.3 11.4 13.8 16.4 19.3 22.4 25.7 29.2 1.87 2.11 2.36 2.63 2.91 3.21 3.53 3.86 4.20 4.93 5.71 6.56 7.46 8.43 9.45 10.5 11.7 14.1 16.8 19.7 22.9 26.2 - 2.42 2.74 3.09 3.42 3.79 4.18 4.58 5.06 5.41 6.40 7.42 8.52 9.80 11.0 12.3 13.7 15.2 18.3 21.8 25.7 29.7 34.1 38.8 1.44 1.63 1.83 2.04 2.26 2.49 2.73 2.98 3.25 3.81 4.42 5.07 5.77 6.52 7.31 8.14 9.02 10.9 13.0 15.1 17.7 20.3 23.1 1.69 1.91 2.15 2.39 2.65 2.92 3.20 3.50 3.81 4.47 5.18 5.95 6.77 7.64 8.58 9.55 10.6 12.8 15.2 17.7 20.8 23.8 27.1 1.69 1.91 2.14 2.38 2.64 2.91 3.19 3.49 3.80 4.46 5.17 5.94 6.76 7.63 8.55 9.53 10.6 12.8 15.2 17.8 20.7 23.8 27.0 1.84 2.08 2.33 2.59 2.87 3.17 3.48 3.80 4.14 4.86 5.63 6.46 7.35 8.30 9.31 10.4 11.5 13.9 16.6 ---- 2.24 2.53 2.83 3.15 3.49 3.85 4.23 4.62 5.03 5.90 6.84 7.85 8.93 10.1 11.3 12.6 14.0 16.9 20.2 ---- 1.77 2.00 2.24 2.50 2.77 3.05 3.53 3.66 3.98 4.68 5.42 6.22 7.08 7.99 8.96 9.99 11.1 13.4 15.7 ---- 2.04 2.31 2.59 2.88 3.19 3.52 3.86 4.22 4.60 5.39 6.26 7.18 8.17 ---------- 1.96 2.22 2.49 2.77 3.07 3.38 3.71 4.06 4.42 5.18 6.02 6.90 7.86 ---------- 1.73 1.95 2.19 2.44 2.70 2.98 3.27 3.57 3.89 4.57 5.30 6.78 6.92 7.81 8.76 9.76 10.8 13.1 15.6 22.4 21.2 24.3 27.7 1.83 2.06 2.31 2.57 2.85 3.14 3.45 3.77 4.11 4.82 5.59 6.42 7.30 8.24 9.24 10.3 11.4 13.8 16.4 19.3 22.4 25.7 29.2 1.93 2.18 2.45 2.73 3.02 3.33 3.66 3.99 4.35 5.11 5.93 7.58 7.74 8.73 9.79 10.9 12.1 14.6 17.4 20.5 23.7 27.2 31.0 2.06 2.32 2.60 2.90 3.21 3.54 3.89 4.24 4.63 5.43 6.30 8.06 8.23 9.29 10.4 11.6 12.8 15.6 18.5 21.8 25.2 28.9 32.9 1.44 1.63 1.83 2.04 2.26 2.49 2.73 2.98 3.25 3.81 4.42 5.07 5.77 6.52 7.31 8.14 9.02 10.9 13.0 15.1 17.7 20.3 23.1 1.85 2.09 2.35 2.62 2.90 3.19 3.50 3.82 4.17 4.89 5.67 6.50 7.40 8.37 9.38 10.4 11.6 14.0 16.7 19.4 22.7 26.0 29.6 1.23 1.38 1.55 1.73 1.91 2.11 2.32 2.53 2.76 3.23 3.75 4.31 4.90 5.53 6.21 6.95 7.64 9.28 11.1 12.9 15.0 17.2 19.6 1.30 1.46 1.64 1.83 2.02 2.24 2.46 2.68 2.93 3.52 3.98 4.57 5.19 5.86 6.58 7.37 8.10 9.84 11.8 13.7 15.9 18.2 20.8 1.83 2.06 2.31 2.57 2.85 3.14 3.45 3.77 4.11 4.82 5.59 6.42 7.30 8.24 9.24 10.3 11.4 13.8 16.4 19.3 22.4 25.7 29.2 1.94 2.19 2.46 2.74 3.03 3.34 3.67 4.01 4.37 5.12 5.94 6.82 7.76 8.76 9.83 11.0 12.1 14.7 17.5 20.5 23.8 27.3 31.1 Diameter Tolerances Diameter Tolerances Diameter Tolerances Over 1”-2” + 0.005” -0.000” Over 2”- 2-7/8” + 0.030” -0.000” Over 2-7/8”- 8” Sufficient to finish 5 Extruded Plate Availability ឣ Normally Stocked Approximate Weight MATERIAL Thickness in Inches - Standard Size 24” x 48” 1/32 1/16 3/32 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 7/8 11-1/4 1-1/2 1-3/4 2 DELRIN® Natural, Black .231 .463 .694 .925 1.39 1.85 2.31 2.78 3.70 4.63 5.56 6.49 7.41 9.27 11.1 13.0 14.8 570* -----2.03 2.54 3.04 4.06 5.07 6.09 7.10 8.12 10.1 12.2 14.2 16.2 AF Blend -----2.00 2.50 3.00 4.01 5.01 6.01 7.01 8.01 10.0 12.0 14.0 16.0 TECAFORM™ Natural, Black .231 .463 .694 .925 1.39 1.85 2.31 2.78 3.70 4.63 5.56 6.49 7.41 9.27 11.1 13.0 14.8 SD -------2.62 3.48 4.36 5.23 6.10 6.97 8.72 10.5 12.2 13.9 HPV 13 - ----2.00 2.50 3.00 4.01 5.01 6.01 7.01 8.01 10.0 12.0 14.0 16.0 TECAMID™ Natural, Black .185 .370 .555 .740 1.11 1.48 1.85 2.22 2.97 3.71 4.45 5.19 5.93 7.41 8.90 12.3 11.9 MDS .185 .370 .555 .740 1.11 1.48 1.85 2.22 2.97 3.71 4.45 5.19 5.93 7.41 8.90 12.3 11.9 Natural GF 30* -----1.75 2.20 2.64 3.52 4.39 5.27 6.15 7.03 8.79 10.6 12.3 14.1 TECANAT™ Natural, Black -----1.56 1.95 2.34 3.12 3.90 4.68 5.46 6.24 7.80 9.36 10.9 12.5 Natural GF 20* - - - - - 1.74 2.18 2.61 3.49 4.36 5.23 6.10 6.97 8.71 10.5 12.2 13.9 ™ TECADUR PET Natural -----1.78 2.23 2.67 3.56 4.45 5.35 6.24 7.13 8.91 10.7 12.5 14.3 TECAFLON™ PVDF Natural - - - - - 2.31 2.89 3.47 4.63 5.79 6.94 8.10 9.26 11.57 13.89 16.2 18.52 TECARAN™ Natural, ABS Black -----1.38 1.72 2.07 2.76 3.45 4.14 4.83 5.51 6.89 8.27 9.65 11.0 Flame Retardant -----1.62 2.02 2.43 3.24 4.05 4.86 5.67 6.46 8.08 9.70 11.3 12.9 TECASON™ S Natural -------2.42 3.23 4.03 4.84 5.64 6.45 8.06 9.68 11.3 12.9 TECATRON™ Natural -----1.75 2.20 2.64 3.52 4.39 5.27 6.15 7.03 8.78 10.6 12.3 14.1 Natural GF 40* - - - - - 2.14 2.66 3.21 4.28 5.33 6.40 7.47 8.53 10.7 12.8 14.9 17.0 TECAPEEK™ Natural -----1.69 2.11 2.54 3.38 4.23 5.07 5.92 6.76 8.45 10.1 11.8 13.5 Natural GF 30* - ----1.95 2.44 2.93 3.90 4.88 5.85 6.83 7.80 9.75 11.7 13.7 15.6 Natural CF 30* -----1.87 2.34 2.81 3.74 4.68 5.62 6.56 7.49 9.36 11.2 13.2 15.0 ULTEM® Natural --------3.30 4.13 4.96 5.78 6.61 8.26 9.91 11.6 13.2 Natural GF 10* - ------2.62 3.48 4.36 5.23 6.10 6.97 8.72 10.5 12.2 13.9 Natural GF 20* -------2.77 3.69 4.62 5.55 6.46 7.39 9.24 11.1 13.0 14.8 Natural GF 30* - - -----2.95 3.92 4.91 5.89 6.87 7.86 9.82 11.8 13.8 15.7 NORYL® Black EN 265 -----1.38 1.72 2.07 2.76 3.45 4.14 4.83 5.51 6.89 8.27 9.65 11.0 Natural GF 30* ---- 1.68 2.10 2.52 3.36 4.19 5.03 5.87 6.71 8.39 10.1 11.7 13.4 SINTIMID® Natural -------2.62 3.48 4.36 5.23 6.10 6.97 8.72 10.5 12.2 13.9 15% graph .231 .463 .694 .925 1.39 1.85 2.31 2.78 3.70 4.63 5.56 6.49 7.41 9.27 11.1 13.0 14.8 6 (lbs.
Load more

Recommended publications
  • Machining Recommendations for Semi-Finished Engineering Plastics Content
    Stock shapes Machining Recommendations for Semi-Finished Engineering Plastics Content 4 Processing of plastics (introduction) 5 Differences between plastics and metals 6 Extrusion technology 6 Tools and machines 7 Machining 8 Cutting 9 Turning 9 Milling 10 Drilling 11 Cutting threads 11 Planing / Plane milling 12 Grinding 13 Surface quality, reworking and de-burring 15 Machining guidelines 16 Interview with Hufschmied Zerspanungssysteme 18 Cooling and cooling lubricants 19 Annealing 20 Morphological changes and post-shrinkage 21 Dimensional stability 22 Product groups and material characteristics 22 TECAFORM AH / AD, TECAPET, TECAPEEK 22 TECAST T, TECAMID 6, TECAMID 66 23 TECANAT, TECASON, TECAPEI 23 TECA Materials with PTFE 23 TECASINT 24 Fibre reinforced materials 25 Special case of TECATEC 26 7 Machining errors - causes and solutions 26 Cutting and sawing 26 Turning and milling 27 Drilling Technical plastics PI High-temperature 572 °F plastics PAI PEKEKK PEEK, PEK LCP, PPS PES, PPSU PTFE, PFA PEI, PSU ETFE, PCTFE 300 °F PPP, PC-HT PVDF Engineering plastics PA 46 PC 212 °F PET, PBT PA 6-3-T PA 66 PA 6, PA 11, PA 12 POM PMP long term service temperature Standard plastics PPE mod. PMMA PP PE PS, ABS, SAN amorphous semi-crystalline Polymer Abbreviation Ensinger Nomenclature Polymer Name PI TECASINT Polyimide PEEK TECAPEEK Polyether ether ketone PPS TECATRON Polyphenylene sulphide PPSU TECASON P Polyphenylsulphone PES TECASON E Polyethersulphone PEI TECAPEI Polyetherimide PSU TECASON S Polysulphone PTFE TECAFLON PTFE Polytetrafluoroethylene
    [Show full text]
  • Machining Recommendations for Semi-Finished Engineering Plastics Content
    Stock shapes Machining Recommendations for Semi-Finished Engineering Plastics Content 4 Processing of plastics (introduction) 5 Differences between plastics and metals 6 Extrusion technology 6 Tools and machines 7 Machining 8 Cutting 9 Turning 9 Milling 10 Drilling 11 Cutting threads 11 Planing / Plane milling 12 Grinding 13 Surface quality, reworking and de-burring 15 Machining guidelines 16 Interview with Hufschmied Zerspanungssysteme 18 Cooling and cooling lubricants 19 Annealing 20 Morphological changes and post-shrinkage 21 Dimensional stability 22 Product groups and material characteristics 22 TECAFORM AH / AD, TECAPET, TECAPEEK 22 TECAST T, TECAMID 6, TECAMID 66 23 TECANAT, TECASON, TECAPEI 23 TECA Materials with PTFE 23 TECASINT 24 Fibre reinforced materials 25 Special case of TECATEC 26 Machining errors - causes and solutions 26 Cutting and sawing 26 Turning and milling 27 Drilling Technical plastics PI High-temperature 300 °C plastics PAI PEKEKK PEEK, PEK LCP, PPS PES, PPSU PTFE, PFA PEI, PSU ETFE, PCTFE 150 °C PPP, PC-HT PVDF Engineering plastics PA 46 PC 100 °C PET, PBT PA 6-3-T PA 66 PA 6, PA 11, PA 12 POM PMP Long term service temperature Standard plastics PPE mod. PMMA PP PE PS, ABS, SAN Amorphous Semi-crystalline Polymer Abbreviation Ensinger Nomenclature Polymer Name PI TECASINT Polyimide PEEK TECAPEEK Polyether ether ketone PPS TECATRON Polyphenylene sulphide PPSU TECASON P Polyphenylsulphone PES TECASON E Polyethersulphone PEI TECAPEI Polyetherimide PSU TECASON S Polysulphone PTFE TECAFLON PTFE Polytetrafluoroethylene
    [Show full text]
  • High Performance and Engineering Plastic Solutions for the Oil and Gas
    Stock shapes High performance and engineering plastic solutions for the oil and gas industry Typical applications of technical plastics Plastics in application: Oil and Gas industry in the oil and gas industry Nowadays, technical plastics have a major Ensinger‘s expertise in developing and manu- contribution to make towards improving ex- facturing high performance and engineering isting solutions because modern materials of- plastic materials has enhanced its product fer a wider range of benefits. These benefits portfolio to suit a wide range of different ap- include: plications. ˌ Weight reductions ˌ Corrosion resistance With a number of worldwide production facili- Sub-sea connectors Seals rings back-up seats Valve Hydrophone housings Covers Bushings Sheaves Wire Rope Winch Drum Shells ROVs for Components ROVs for Framework ˌ Thermal decoupling and ties, Ensinger has a vast knowledge of plastic TECAPEEK natural • PEEK e e e e ˌ Minimised noise emissions material production, with techniques that in- TECAPEEK GF30 natural • PEEK e e e e The progress currently being made in the oil clude: TECATRON natural • PPS e and gas field is largely due to the use of mod- ˌ Extrusion TECAFORM AH natural • POM-C e e ern materials. ˌ Casting ˌ Compression moulding TECAFORM AD natural • POM-H e e Ensinger has a range of over one hundred high ˌ Injection moulding TECAST T natural • PA 6 C e e e performance and engineering plastic materi- ˌ Compounding TECAFINE PP natural • PP e e als, offering a variety of properties that benefit ˌ Spin Moulding TECAFINE PE natural • PE e e a wide range of applications, including those ˌ Machining within the oil and gas sector.
    [Show full text]
  • Ensinger Penn Fibre Materials & Capabilities
    g Product Information Ensinger Penn Fibre Materials & Capabilities Nylon - Polyamide Coils and Strips Sheets 2' x 4' Sheets 4' x 8' Nylatron® GS .010 to .125 .031 to .250 .062 to .250 Nylon 11 or 12 .020 to .093 .031 to .125 NA Pennite® 4508 Nylon 6 Black 15% GF .015 to .062 .031 to .250 .062 to .250 Pennite® 4512 Nylon 6 Black 12% GF .015 to .062 .031 to .250 .062 to .250 TECAMID® 6 Nylon Type 6 Nat & Black .010 to .125 .031 to .125 NA TECAMID® 66 Black (Nylon 2% Carbon Bk) .010 to .125 .031 to .250 .062 to .250 TECAMID® 66 GF13, GF33 (Nylon 6/6 13% & 33%) .015 to .093 .031 to .125 NA TECAMID® 66 HS MO molly filled Nylon .010 to .125 .031 to .250 .062 to .250 TECAMID® 66 HS Nylon Nat & Black .010 to .125 .031 to .250 .062 to .250 TECAMID® 66 MO molly filled Nylon .010 to .125 .031 to .250 .062 to .250 TECAMID® 66 Nylon 6/6 Nat, Black & Colors .010 to .125 .031 to .250 .062 to .250 TECAMID® 66 Nylon MDS 13% & 33% Glass .015 to .093 .031 to .125 NA TECAMID® 66 ST Nylon ST 801 HS Nat & Black .010 to .062 .031 to .062 NA TECAMID® 66 ST Nylon ST 801 Nat & Black .010 to .062 .031 to .062 NA TECAMID® Nylon ST 801AW BK-195 .010 to .062 .031 to .062 NA Vydyne® 66R Nat, Black & Colors .010 to .062 NA NA Vydyne® 75HF Nat & Black .010 to .125 .031 to .125 NA POM - Acetal Polyoxymethylene Coils and Strips Sheets 2' x 4' Sheets 4' x 8' TECAFORM® AD (Delrin® Nat, Black & Colors) .010 to .125 .031 to .250 .062 to .125 TECAFORM® AD AF (Delrin® AF - 13%) .020 to .093 .031 to .250 NA TECAFORM® AH Acetal Nat, Black & Colors .010 to .125 .031 to .250 .062
    [Show full text]
  • Engineering Plastics – the Manual This Manual Is Designed to Provide Readers with a Compact Outline of Our Extensive Fund of Plastics-Related Knowledge
    Stock shapes Engineering plastics – The Manual This manual is designed to provide readers with a compact outline of our extensive fund of plastics-related knowledge. Alongside a grounding of theoretical facts and informa- tion, the manual also provides a range of practical tips and material recommendations, together with calculation ex- amples for component design and advice on the further processing of plastics. 4 Overview of plastics 6 Classification of plastics 7 Ensinger process chain 8 Processing methods Materials 12 TECARAN ABS 13 TECANYL 14 TECAFINE PE 15 TECAFINE PMP 16 TECAPRO MT / TECAFINE PP 18 TECAFORM 20 TECAMID 22 TECAST / TECARIM 24 TECADUR / TECAPET 26 TECANAT 28 TECAFLON 30 TECAPEI 32 TECASON S, P, E 34 TECATRON 36 TECAPEEK 38 TECATOR 40 TECASINT Properties 44 Modifications / additives 46 Thermal properties 50 Mechanical properties 54 Processing influences 55 Tribological characteristics 57 Electrical properties 60 Chemical resistance 62 Moisture absorption 63 Flame retardant classification 64 Radiation resistance 66 Certifications and approvals Material selection and calculations 70 Material selection 72 Calculations Further processing This manual is designed to provide readers with a compact 76 Processing plastics outline of our extensive fund of plastics-related knowledge. 77 Machining guidelines Alongside a grounding of theoretical facts and informa- 78 Tempering tion, the manual also provides a range of practical tips and 80 Welding material recommendations, together with calculation ex- 82 Gluing amples for component
    [Show full text]
  • Engineering Plastics Manual
    Stock shapes Engineering plastics – The Manual This manual is designed to provide readers with a compact outline of our extensive fund of plastics-related knowledge. Alongside a grounding of theoretical facts and informa- tion, the manual also provides a range of practical tips and material recommendations, together with calculation ex- amples for component design and advice on the further processing of plastics. 4 Overview of plastics 6 Classification of plastics 7 Ensinger process chain 8 Processing methods Materials 12 TECARAN ABS 13 TECANYL 14 TECAFINE PE 15 TECAFINE PMP 16 TECAPRO MT / TECAFINE PP 18 TECAFORM 20 TECAMID 22 TECAST / TECARIM 24 TECADUR / TECAPET 26 TECANAT 28 TECAFLON 30 TECAPEI 32 TECASON S, P, E 34 TECATRON 36 TECAPEEK 38 TECATOR 40 TECASINT Properties 44 Modifications / additives 46 Thermal properties 50 Mechanical properties 54 Processing influences 55 Tribological characteristics 57 Electrical properties 60 Chemical resistance 62 Moisture absorption 63 Flame retardant classification 64 Radiation resistance 66 Certifications and approvals Material selection and calculations 70 Material selection 72 Calculations Further processing This manual is designed to provide readers with a compact 76 Processing plastics outline of our extensive fund of plastics-related knowledge. 77 Machining guidelines Alongside a grounding of theoretical facts and informa- 78 Tempering tion, the manual also provides a range of practical tips and 80 Welding material recommendations, together with calculation ex- 82 Gluing amples for component
    [Show full text]
  • Ensinger and Insulbar® 4-5
    Standard programme insulbar® insulating bars for windows, doors and façades Edition 1-2021 Table of contents Introduction to Ensinger and insulbar® 4-5 With a standard to a system: standard profile and system group 6-7 System groups: typical applications 8-9 Always the right profile: overview of range 10-11 Further finishing 12-13 Ensinger - your expert partner: range of services 14 The aluminium cavity makes all the difference: proposal for the aluminium cavity 15 Classic roll-up profiles for windows, doors and façades 16-29 Special profiles insulbar® shear-free for doors 30-31 Special profiles insulbar® for hidden sash & insulbar® glazing bead 32-33 Special profiles insulbar® bolt operating profiles 34-35 Special profiles insulbar® for sliding systems 36-37 Special profiles insulbar® for façades 38-39 Article overview 40-46 Additional information 47 2 The thermal break professionals. Efficient thermal break of window, door and façade Innovative and future-oriented – but steeped in tradition! systems with insulbar® insulating bars Plastic insulating profiles are key components for the thermal break of modern window, door and façade systems made of metal. Ensinger profiles are the first choice for quality- conscious system manufacturers and processing companies. Under the brand name insulbar®, Ensinger Plastics experts and partners to industry develops and produces technically superior insulbar® represents only a part of Ensinger’s thermal insulating bars, and for over 40 years extensive range of products and services. The has been one of the leading manufacturers company develops and produces – with its worldwide. outstanding expertise in plastics – compounds, stock shapes, composites, finished parts and Profile professionals and inventors profiles made from technical plastics.
    [Show full text]
  • 101018 Ens Image Rz En.Pdf
    Ensinger Germany Ensinger worldwide Ensinger GmbH Austria Italy Sweden Rudolf-Diesel-Straße 8 Ensinger Sintimid GmbH Ensinger Italia S.r.l. Ensinger Sweden AB 71154 Nufringen Werkstraße 3 Via Franco Tosi 1/3 Box 185 Tel. +49 7032 819 0 4860 Lenzing 20020 Olcella di Busto Kvartsgatan 2C Fax +49 7032 819 100 Tel. +43 7672 7012800 Garolfo 74523 Enköping www.ensinger-online.com Fax +43 7672 96865 Tel. +39 0331 568348 Tel. +46 171 477051 www.ensinger-sintimid.at Fax +39 0331 567822 Fax +46 171 440418 Ensinger GmbH www.ensinger.it www.ensinger.se Mercedesstraße 21 Brazil 72108 Rottenburg a. N. Ensinger Indústria de Japan United Kingdom Tel. +49 7457 9467 0 Plásticos Técnicos Ltda. Ensinger Japan Co., Ltd. Ensinger Limited Fax +49 7457 9467 100 Av. São Borja 3185 Shibakoen Denki Bldg. 7F Wilfried Way www.ensinger-online.com 93.032-000 São Leopoldo-RS 1-1-12, Shibakoen, Minato-ku Tonyrefail Tel. +55 51 35798800 Tokyo 105-0011 Mid Glam CF39 8JQ Ensinger GmbH Fax +55 51 35882804 Tel. +81 3 5402 4491 Tel. +44 1443 678400 Wilfried-Ensinger-Straße 1 www.ensinger.com.br Fax +81 3 5402 4492 Fax +44 1443 675777 93413 Cham www.ensinger.jp www.ensinger.ltd.uk Tel. +49 9971 396 0 China Fax +49 9971 396 570 Ensinger (China) Co., Ltd. Poland USA www.ensinger-online.com Rm 2708.27 / F Ensinger Polska Sp. z o.o. Ensinger Inc. Nanzheng building No. 580 ul. Spóldzielcza 2a 365 Meadowlands Boulevard Ensinger GmbH Nanjing Road (W) 64-100 Leszno Washington, PA 15301 Borsigstraße 7 Shanghai 200041 Tel.
    [Show full text]
  • Issue 1/2009
    Issue 1/2009 Employee and business partner magazine www.ensinger-online.com Theme: ENSINGER Compound Division – Move to a new factory site New polyimide product line TECASINT Assembly for computer tomography The new TECASINT product line Working in cooperation with Sie- encompasses new developments mens Healthcare, ENSINGER has and modifications as well as prov- developed an assembly for com- en materials which have become puter tomography to the volume established in the marketplace under the brand name production stage. The parts which originally had to be SINTIMID. The semi-finished products and stock machined as semi-finished products, can now be man- shapes offer outstanding long-term thermal stability. ufactured in the form of injection moulded blanks. The The different characteristic profiles of the individual time and effort invested in this development has paid materials offer users widely varied technical scope. dividends, resulting in substantial cost and material Page 5 savings for the customer. Page 6 Editorial Dear readers, Perhaps you know the prayer in which God would feasible and the ir- like to bless you with the energy to do things which revocable. It sounds you can change, the composure to accept the things easier than it is. Be- which you cannot change, and, finally, the wisdom cause, who definite- to be able to distinguish one from the other. ly knows whether their personal analysis still applies The distinction found is revealing since it offers two in a rapidly changing environment and their recipe more perspectives than is normally the case. Action for what is to be done is still effective.
    [Show full text]
  • Machining Recommendations for Semi-Finished Engineering Plastics Content
    Stock shapes Machining Recommendations for Semi-Finished Engineering Plastics Content 4 Processing of plastics (introduction) 5 Differences between plastics and metals 6 Extrusion technology 6 Tools and machines 7 Machining 8 Cutting 9 Turning 9 Milling 10 Drilling 11 Cutting threads 11 Planing / Plane milling 12 Grinding 13 Surface quality, reworking and de-burring 15 Machining guidelines 16 Interview with Hufschmied Zerspanungssysteme 18 Cooling and cooling lubricants 19 Annealing 20 Morphological changes and post-shrinkage 21 Dimensional stability 22 Product groups and material characteristics 22 TECAFORM AH / AD, TECAPET, TECAPEEK 22 TECAST T, TECAMID 6, TECAMID 66 23 TECANAT, TECASON, TECAPEI 23 TECA Materials with PTFE 23 TECASINT 24 Fibre reinforced materials 25 Special case of TECATEC 26 7 Machining errors - causes and solutions 26 Cutting and sawing 26 Turning and milling 27 Drilling Technical plastics PI High-temperature 572 °F plastics PAI PEKEKK PEEK, PEK LCP, PPS PES, PPSU PTFE, PFA PEI, PSU ETFE, PCTFE 300 °F PPP, PC-HT PVDF Engineering plastics PA 46 PC 212 °F PET, PBT PA 6-3-T PA 66 PA 6, PA 11, PA 12 POM PMP long term service temperature Standard plastics PPE mod. PMMA PP PE PS, ABS, SAN amorphous semi-crystalline Polymer Abbreviation Ensinger Nomenclature Polymer Name PI TECASINT Polyimide PEEK TECAPEEK Polyether ether ketone PPS TECATRON Polyphenylene sulphide PPSU TECASON P Polyphenylsulphone PES TECASON E Polyethersulphone PEI TECAPEI Polyetherimide PSU TECASON S Polysulphone PTFE TECAFLON PTFE Polytetrafluoroethylene
    [Show full text]